Get tender documents at just ₹200 per tenderKnow More
Search made simple for latest tendersNo hidden charges. No keyword restrictionsExplore Our Plansor Pay Per Tender

Northern Coalfields Limited

Sidhi, Madhya Pradesh

  • Opening Date

    09 Sep 2019

  • Closing Date

    25 Sep 2019

  • Tender Amount

    ₹ 10,89,587

  • EMD

    ₹ 13,700

Are you Looking for Joint Venture Partners, Contractor Consortium, Back-to-Back Contractor, Project Financier?
We will help you to find the right match for FREE.
Summary

Development Of Welfare Complex At Nigahi Project.

Documents
NOTICE INVITING TENDERS AND INSTRUCTIONS TO BIDDERS
BILL OF QUANTITIES
CONDITIONS OF CONTRACT
Don't have sufficient eligibility, BG funds or resources?
We will help you to find the right match for FREE.
BOQ Items
ItemQuantityUnitsRateAmount
... more
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
15cum- 2496
... more
Supplying and filling in plinth with ramming, consolidating and dressing complete.
4cum- 3512
... more
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)
16cum- 69587
... more
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
4cum- 24413
... more
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
1cum- 7444
... more
Half Brick work with non modular FALG bricks confirmng to IS 12894 class designation 7.5 average compressive strength etc complete in allrespect in superstructure above plinth level up to floor V level. In cement mortor 1:4 (1 cement :4 Coarse sand)
70sqm- 35865
... more
12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
148sqm- 23791
... more
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
148sqm- 11751
... more
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).
83sqm- 7113
... more
Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
-cum- 1562
... more
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars.
371kg- 17733
... more
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
1cum- 9350
... more
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars.
371kg- 17733
... more
Centering and shuttering including strutting, propping etc. and removal of form or all heights : Foundations, footings, bases of columns, etc. for mass concrete
4sqm- 803
... more
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Columns, Pillars, Piers, Abutments, Posts and Struts
24sqm- 11844
... more
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers
33sqm- 11036
... more
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
24sqm- 11439
... more
Extra for providing and fixing wind ties of 40x 6 mm flat iron section.
10RM- 949
... more
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
434kg- 21483
... more
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws]
2sqm- 2837
... more
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding.
16kg- 1554
... more
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
6sqm- 438
... more
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
23sqm- 19596
... more
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
235kg- 91274
... more
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm
2each- 130
... more
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-charge Anodized (AC 15 ) aluminium
2each- 106
... more
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
673kg- 265868
... more
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
760sqm- 391552
... more
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
2cum- 9403
... more
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
20cum- 2515
... more
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar.
12cum- 10466
... more
Carriage of Materials: Lime, Moorum, Building rubbish 1km Lead.
50cum- 3934
... more
Total impact of GST for the purpose of CTC
1Nos- 196125

Page 1 of 32 NORTHERN COALFIELDS LIMITED (A Miniratna Company & Subsidiary of Coal India Limited) OFFICE OF THE GENERAL MANAGER (NIGAHI AREA) Civil Engineering Department P.O. NIGAHI PROJECT, DISTT. SINGRAULI (M.P.) 486 884 Phone No – 07805-276324,253109, FAX No 07805-253019 E-mail: civilnigahi@gmail.com WEB SITE: www.coalindiatenders.nic.in E-TENDER NOTICE NIT No.: NGH/C/19-20/ETN - 51 Dated: 09.09.2019 1. Digitally signed and encrypted e-Tenders are invited under Two Part system on the website https://coalindiatenders.nic.in from the reputed and experienced contractors for the following work: Description of Work Location Estimated Value (excluding GST) (Rs.) Earnest Money (Rs.) Period of Completion (in days) Development of Welfare complex at Nigahi Project. Nigahi Area 10,89,586.25 13,700.00 180 days 2. The bid documents will be available on the website(s) https://coalindiatenders.nic.in, https://eprocure.gov.in & https://nclcil.in and can be downloaded by the bidder up to the bid submission end date. There is no Application Fee. 3. Time Schedule of Tender: Sl.No. Particulars Date Time a. Tender e-Publication date 09.09.2019 06:55 PM b. Document download start date 09.09.2019 06:55 PM c. Document download end date 25.09.2019 11:00 AM d. Start date for seeking Clarification on-line 10.09.2019 09:30 AM e. Last date for seeking Clarification on-line 18.09.2019 11:00 AM f. Bid Submission start date 10.09.2019 09:30 AM g. Bid submission end date (Original) 25.09.2019 11:00 AM h. Bid opening date (Part-I and Part-II) (Original) 26.09.2019 11:00 AM i. Start date of Reverse Auction (Applicable for estimated cost of Rs. 1.00 Crore and above only) As specified online 4. ONLINE MODE FOR DEPOSITION OF EMD: 4.1 The bidder will have to make the payment of EMD through ONLINE mode only. In ONLINE mode the bidder can make payment of EMD either through net-banking from designated Bank/s or through NEFT/RTGS from any scheduled Bank. In case of payment through net-banking the money will be immediately transferred to CIL/Subsidiary's designated Account. In case of payment through NEFT/RTGS the bidder will have to make payment as per the Challans generated by system on e- Procurement portal https://coalindiatenders.nic.inand will have to furnish online the Unique Transaction Page 2 of 32 Reference (UTR) Numbers before submission of bid. Bidder will be allowed to submit his/her bid by the system only when the EMD is successfully received in CIL/Subsidiaryaccount and the information flows from Bank to e-Procurement system. 4.2 In case of exemption of EMD the scanned copy of document (attested by notary public) in support of exemption will have to be uploaded by the bidder during bid submission. However, this option shall be enabled only in those cases where the exemption of EMD to some bidders is allowed as per NIT. The qualification in the bid will also be subject to the receipt and acceptance of EMD within the scheduled date and time as mentioned in the NIT. NCL shall not be responsible for any delay in receipt of EMD. 5. Pre-bid Meeting: The pre-bid meeting shall be held in the office of Tender Inviting Authority on the scheduled date & time, if specified online. Non-attendance of pre-bid meeting will not be a cause for disqualification of the bidder and it shall be presumed that the bidder does not require any clarification. The purpose of the pre-bid meeting will be to clarify issues. 6. The bidders have to accept the on-line User Portal Agreement which contains the acceptance of all the Terms and Conditions of NIT and Bid document, undertakings and the e-Tendering system through https://coalindiatenders.nic.in in order to become an eligible bidder. This will be a part of the agreement. 7. Eligibility Criteria:- A. Work Experience: The Intending bidder must have in its name or proportionate share a

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.