Paint Tenders

Details: N0016425snb29– Request For Information (rfi) –bead Clamps– Psc 5845 – Naics 332111 issue Date: 29 January 2025 – Closing Date: 19 February 2025 – 4:00 Pm Edt request For Information (rfi): in Accordance With Department Of Defense Far Supplement (dfars) Procedures, Guidance, And Information (pgi) 206.302-1, The Government Is Issuing This Rfi Announcement As Part Of Its Market Research. This Rfi Announcement Is Intended To Determine The Availability And Technical Capability Of Businesses To Provide The Required Supplies. background: the Naval Surface Warfare Center, Crane Division (nswc-cr) Is Seeking Information For Market Research Purposes For The Future Procurement Of Bead Clamps (6667641). The Clamps Are Utilized To Hold The Sonar Dome Rubber Window To The Hull Of A Ddg51 Class Destroyer. a Clamp Set Consists Of Three (3) Different But Similar Forged Shaped Clamps. one (1) Full Set Consists Of: type 1 Clamps - Qty. 204 type 2 Clamps - Qty. 134 type 3 Clamps - Qty. 84 naics 332111 – The Hammer Forgings Associated With These Bead Clamps Shall Be Made From Unfinished Steel. The Hammer-forged Clamps Are Made From Aisi C 1045 Steel With A Normalized Material Condition. Tooling Dies Will Not Be Supplied For Any Future Bead Clamp Effort Thus New Hammer Dies Will Be Required For The Manufacture Of The Bead Clamps. The Bead Clamps Are Required To Be Painted Per The Painting System Specification Mil-dtl-24441 Per The 6667641 Drawing. All Drawing Dimensions Would Be Required To Comply With Drawing 6667641 After The Required Painting System In Accordance With Mil-dtl-24441 Is Applied. A First Article Will Be Required On Fully Finished Painted Bead Clamps Prior To Government Acceptance. Clamp Numbers And Heat Numbers Shall Be Legible After Mil-dtl-24441 Painting System Is Applied. Parts Are Required To Be Delivered In Two (2) Wooden Boxes, With Required Dimensions Of 48”x 38” X 28”, L X W X H, This Includes 4” By 4” Runners On Bottom Of Boxes. Bead Clamp Sets Shall Not Be Shorted Any Pieces. All Requested Associated Bead Clamp Parts Are Required For Acceptance Of A Full Set. material Requirements: tensile Strength - 95 Ksi (min) yield Strength -55 Ksi (min) elongation (2%) -18% (min) hardness - 187 Bhn (min) W/ 4.40 Ball Diameter @ 3000 Kgf. surface Finish Of Forging Is 500microinches. the Future Demand Is Estimated At 2-3 Sets Per Year. drawing 6667641 Will Take Precedence If Any Conflict Between It And This Document Exists. requested Information: interested Parties Are Requested To Provide The Information That Identifies Its Capability To Provide The Support Described Herein. interested Parties Must Be Properly Registered In The System For Award Management (sam) And May Obtain Information On Sam Registration And Annual Confirmation Requirements By Calling 1-866-606-8220 Or Via The Internet At Https://www.sam.gov. responses: written Responses Shall Be Submitted Via E-mail To The Point Of Contacts Listed Below By The Closing Date. nswc-cr, ms. Erin Kelley – Code 0221 crane, Indiana 47522-5001 erin.c.kelley3.civ@us.navy.mil nswc-cr mr. Matthew Swartzentruber Code – 0221 crane, Indiana 47522-5001 matthew.c.swartzentruber.civ@us.navy.mil responses To The Rfi Shall Include The Following: submitter's Name street Address, City, State, Nine (9) Digit Zip Code point Of Contact (poc) poc Telephone And duns Number cage Code announcement Number: N0016425snb29 this Rfi Is The Initiation Of Market Research Under Far Part 10. This Announcement Does Not Constitute An Invitation For Bids (ifb), A Request For Quote (rfq), Or A Request For Proposal (rfp) And It Should Not Be Construed As A Commitment Of Any Kind By The Government To Issue A Formal Solicitation Or Ultimately Award A Contract. responses To This Notice Cannot Be Accepted As Offers. The United States Government Is In No Way Liable To Pay For Or Reimburse Any Companies Or Entities That Respond To This Announcement. Any Costs Incurred By Interested Companies In Response To This Announcement Will Not Be Reimbursed. Nothing In This Announcement Constitutes An Obligation On The Part Of The United States Government, Nor Is The Government Tasking Any Offeror To Develop Any Technologies Described Herein. all Interested Parties Should Provide The Requested Information Regarding This Announcement No Later Than 4:00 P.m. Edt On Or Before The Closing Date As Specified At The Beginning Of This Announcement. Responses May Be Submitted Any Time Prior To Expiration Of This Announcement. Responses Received After 4:00 P.m. Edt On The Closing Date May Not Be Considered In The Government's Analyses. all Information Marked As Proprietary Information Will Be Safeguarded To Prevent Disclosures To Non-government Personnel And Entities. Your Interest In The Response Is Appreciated. all Changes That Occur Prior To The Closing Date Will Be Posted To The Sam Website Https://www.sam.gov. please Reference Announcement Number N0016425snb29 In All Your Correspondence.

Details: This Requirement Is For To Perform Necessary Repairs On A, 2020 Ford Transit 350 (tag Number G434085x, Vin#1fbax9y8xlkb44330). All Equipment Must Be Covered By The Manufacturer’s Warranty. All Items Shall Include Standard Warranty. Repairs Will Be Completed In Accordance With Industry Standards. Vendors Shall Be Following All Epa And Osha Standards And Requirements. Sds And Any Other Required Documents Must Be On Site. Vendors Must Be Properly Insured To Cover Any Losses For Gsa Vehicles That Are In Their Shop. Valid Business License(s) Is Required In Accordance With State And Local Guidelines. All Employees Of Selected Vendor Must Be Paid In Accordance With Local Department Of Labor Established Wages. Please See Bill Of Materials (bom). bom: injectors fuel Pump any One Time Use Items For Fuel System cylinder Head Rebuild any One Time Use Items engine Oil As Needed coolant As Needed all Vendors Submitting Quote Must Have Repair Facility Within 75 Miles Of Agency Operating The Vehicle Located At, N/a, Fairbanks, Ak 99709. The Quote Must Be Itemized And Detailed With Individual And Total Parts Prices, Labor Time, And All Paint Labor If Applicable. Quote Is To Include All Fees, Including Shipping Or Freight Costs And Provide The Estimated Eta, Number Of Days Delivery Can Be Expected After Receipt Of Purchase Order. Any Quote Not Received By The Specified Date And Time Shall Result In Exclusion From Consideration. prior To Submitting A Quote, Offerors Shall Be Actively Registered In System For Award Management (sam) Per Far 52.204-99 System For Award Management (deviation). Registration Instructions May Be Obtained, And Online Registration May Be Accomplished At Www.sam.gov. By Submitting A Quote, The Offeror Acknowledges The Requirement To Be Registered In The Sam Prior To Award, During Performance, And Through Final Payment Of Any Contract Resulting From The Solicitation. To Be Eligible For Award, Prospective Offerors Must Be Registered In Sam Under The Appropriate Business Category And Naics Code. In Addition, Unless Available Via Sam (i.e. Www.sam.gov) Offerors Are Also To Include A Completed Copy Of Their Representations And Certifications As Per The Provision 52.212-3, Offeror Representations And Certifications-commercial Items. See Attachment A For Full Provision. quote Shall Be Valid For A Minimum Of 30 Calendar Days After Submission.

Details: The Purpose Of This Sources Sought Notice Is To Conduct Market Research And Identify Potential Sources Of Commercial Products/services That Satisfy The Government’s Anticipated Needs. requirements: the Contractor Shall Provide A Product That Meets All Technical Specifications Identified Below. the Contractor Shall Furnish All Labor, Materials, Services, Equipment, Facilities, Etc., To Assemble, Test, Inspect, Pack, Mark, And Deliver A Quantity Of Two (2) New Replacement Lattice Boom Crawler Cranes In Accordance With The Specifications Listed Below: item Description Unit Qty 001 135 Ft Lattice Boom Crawler Crane With Duty Cycle Capabilities Each 1 002 115 Ft Lattice Boom Crawler Crane With Duty Cycle Capabilities Each 1 additional Specifications For Items 001 And 002. - Diesel Exhaust Fluid (def) Electric Refueling Pump To Comply With Epa Requirements - Crane To Be Painted With Marine Rated Paint - Wind Speed Indicator To Be Included - Operations Safety Package To Be Included - Operator Cabin To Include Air-conditioner - One Week Of Training To Be Included - 24 Month Or 4000 Working Hour Warranty item 001 - 135 Ft Lattice Boom Crawler Crane With Duty Cycle Capabilities floating Service Lift Capacities – 135 Ft Boom/no Travel/360 Degree Rating minimum 31,600 Lbs Lifting Capacity At A 70 Ft Radius 75,600 Lbs Counterweight safe Working Grab Operation – 125 Ft Boom/no Travel/360 Degree Rating minimum 25,300 Lbs Lifting Capacity At A 70 Ft Radius 75,600 Lbs Counterweight safe Working Dragline Operation – 115 Ft Boom/no Travel/360 Degree Rating minimum 23,800 Lbs Lifting Capacity At A 74.8 Ft Radius 75,600 Lbs Counterweight track Dimensions maximum Span Between Track Centerlines Is 15.66 Ft minimum Track Width Is 2.66 Ft operating Weight not To Exceed 260,000 Lbs attachments hook Block: 88 Ton, 2 Sheaves swing Rating 360 Degrees Fully Revolving self-assembly Counterweight System 75,600 Lbs With 5.7 Ton Additional crawler Counterweight 15,400 Lbs engine must Meet Epa Standard Stage V / Tier 4f For Emissions fall Protection main Boom Walkway Boom Foot main Boom Walkway 20 Ft main Boom Walkway Boom Head item 2 - 115 Ft Lattice Boom Crawler Crane With Duty Cycle Capabilities lifting Operation – 115 Ft Boom/no Travel/360 Degree Rating minimum 20,500 Lbs Lifting Capacity At A 70 Ft Radius 58,000 Lbs Counterweight safe Working Grab Operation – 105 Ft Boom/no Travel/360 Degree Rating minimum 17,600 Lbs Lifting Capacity At A 70 Ft Radius 58,000 Lbs Counterweight safe Working Dragline Operation – 95 Ft Boom/no Travel/360 Degree Rating minimum 17,600 Lbs Lifting Capacity At A 73.8 Ft Radius 58,000 Lbs Counterweight track Dimensions maximum Span Between Track Centerlines Is 13.5 Ft minimum Track Width Is 2.58 Ft operating Weight not To Exceed 200,000 Lbs attachments hook Block: 220,462 Lbs, 2 Sheaves ball Hooks: Suitable Rating For Load Capacity swing Rating 360 Degrees Fully Revolving self-assembly Counterweight System 75,600 Lbs engine must Meet Epa Standard Stage V / Tier 4f For Emissions how To Respond To This Notice in Responding To This Notice, Pleasedo Not Provide Proprietary Information. Please Include Only The Following Information, Readable In Either Microsoft Word 365, Microsoft Excel 365, Or .pdf Format, In The Response: Submit The Response By Email To The Primary Point Of Contact And, If Specified, To The Secondary Point Of Contact Listed In This Notice As Soon As Possible, And Preferably Before The Closing Date And Time Of This Notice. Please Note That To Be Considered For Award Under Any Official Solicitation, The Entity Must Be Registered And “active” In Sam At The Time Of Solicitation Response. provide The Complete Name Of Your Company, Address, Name Of Contact For Follow-up Questions, Their Email, Their Phone Number And, If Your Company Has An Active Registration In Https://sam.gov, Your Company’s Unique Entity Id (uei). identify The Product That Your Company Sells That Can Meet The Objectives Addressed In The Background Section Of This Notice. For Each Product Recommended To Meet The Government’s Requirement, Provide The Following: manufacturer Name if Your Company Is Not The Manufacturer, Provide Information On Your Company’s Status As An Authorized Reseller Of The Product(s) state Whether The Proposed Product Is Manufactured In The United States And, If Not, State The Name Of The Country Where The Product Is Manufactured. identify Any Plans/possibilities For Changes In Manufacturing Location Of The Aforementioned Product And Provide Relevant Details, Including Timeline. for The Naics Code Listed In This Notice: indicate Whether Your Company Is (a) A Small Business Or (b) Other Than Small Business. See The Table Of Small Business Size Standards And The Associated .pdf Download File For Small Business Size Standards And Additional Information. if You Believe The Naics Code Listed In This Notice Is Not The Best Naics Code For The Type Of Product Addressed In This Notice, Identify An Alternative Naics Code That You Believe Would Be More Appropriate For The Planned Procurement. describe Standard Terms And Conditions Of Sale Offered By Your Company For The Recommended Products Such As: Delivery Time After Your Company Accepts The Order; Fob Shipping Terms; Manufacturer Warranty (including Details Regarding Nature And Duration).; If Available, Description(s) Of Available Extended Warranty; Product Setup And Test; Operator And Service Instruction Manual(s); Cleanup After Installation; And If Applicable, Other Offered Services. Provide A Copy Of Manufacturer Standard Terms And Conditions That Typically Relate To The Sale Of The Specified Product, If Available. state Published Price, Discount, Or Rebate Arrangements For Recommended Products And/or Provide Link To Access Company’s Published Prices For Product And Services. questions Regarding This Notice questions Regarding This Notice May Be Submitted Via Email To The Primary Point Of Contact And The Secondary Point Of Contact Listed In This Notice. Questions Should Be Submitted So That They Are Received Byfebruary 13, 2025, 11:00 P.m. Cst. If The Contracting Officer Determines That Providing A Written Amendment To This Notice To Document Question(s) Received Would Benefit Other Potential Respondents, The Questions Would Be Anonymized, And A Written Response To Such Question(s) Would Be Provided Via An Amendment To This Notice. important Notes this Notice Is For Market Research Purposes And Should Not Be Construed As A Commitment By Nist To Issue A Solicitation Or Ultimately Award A Contract. There Is No Solicitation Available At This Time. this Notice Does Not Obligate The Government To Award A Contract Or Otherwise Pay For The Information Provided In Response. any Organization Responding To This Notice Should Ensure That Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine The Organization’s Capability. respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or Provide Feedback To Respondents With Respect To Any Information Submitted. after A Review Of The Responses Received, A Synopsis And Solicitation May Be Published On Gsa’s Ebuy Or Sam.gov. However, Responses To This Notice Will Not Be Considered An Adequate Response To Any Such Solicitation(s). the Responses Shall Not Exceed 3 Pages Including All Attachments, Charts, Etc. thank You For Taking The Time To Submit A Response To This Request!

Description: Northeim District - Framework Agreement Bu - Painting Work - Area 4 Schools Uslar

Description: Renovation of the town hall in Schmallenberg; painting work

Description: Northeim District - Framework Agreement Bu - Painting Work - Area 2 Schools Northeim

Description: The Town Of Sheffield Is Seeking Written Quotes For Repair And Painting Of Library Soffits.

Description: Painting work (school extension building Vierjahreszeiten Elementary School)

Description: Albert-Schweitzer-Schule Wittenberge, new school building Lot 3.14 - painting work

Description: Albert-Schweitzer-Schule Wittenberge, new school building Lot 3.14 - painting work