Military Engineer Services Tender

Fabricate, supply and errect prefabricated accn for OR's Bath & Toilet including foundation and all fittings & fixtures and four Nos service tank with staging complete all as shown on drawings and as specified.

Fabricate, supply and errect prefabricated accn for Store Shelter including foundation and all fittings & fixtures complete all as shown on drawings and as specified.

Fabricate, supply and errect prefabricated accn for Officer's Single Living-I including foundation and all fittings & fixtures and two Nos service tank with staging complete all as shown on drawings and as specified.

Fabricate, supply and errect prefabricated accn for JCOs Shelter including foundation and all fittings & fixtures and two Nos service tank with staging complete all as shown on drawings and as specified.

Fabricate, supply and errect prefabricated accn for Officer's Single Living-II including foundation and all fittings & fixtures and two Nos service tank with staging complete all as shown on drawings and as specified.

Fabricate, supply and errect prefabricated accn for Office Accn including foundation and all fittings & fixtures and one No service tank with staging complete all as shown on drawings and as specified.

Total

Lumpsum price worked out by the tenderer/ bidder for INTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part-II on Serial Page No. 25.

Lumpsum price worked out by the tenderer/ bidder for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-III on Serial Page No. 27.

Lumpsum price worked out by the tenderer/ bidder for SHED FOR GARAGE (FOR 6 NOS CAR) as listed in Schedule ‘A’ Part-IV on Serial Page No. 32.

Schedule ‘A’ Part-V (MISCELLANEOUS ITEMS) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 signifies this fact only.

(INTERNALELECTRIFICATION) Material and labour for point wiring with 1.5sqmm (nominal area) PVC insulated and unsheathed single core (FR-LSH) (conforming to IS-694) copper cable 1100 volts grade with multi stranded copper conductor in and including PVC casing capping heavy duty of adequet size with all fittings and accessories with and including necessary junction box/sheet metal switch, socket and termination box complete including PVC insulated and unsheathed (FR-LSH) (conforming to IS-694) single core multi stranded copper conductor cable of size 1.5sqmm green colour as earth continuty conductor connected to common earth dolly for one light/ fan point controlled by one, one way switch complete all as specified and as directed. Note :- Red colored cable shall be used for live connection, black colored cable shall be used for neutral connection and green colored cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

Material and labour for point wiring with 1.5sqmm (nominal area) PVC insulated and unsheathed single core (FR-LSH) (conforming to IS-694) copper cable 1100 volts grade with multi stranded copper conductor in and including PVC casing capping heavy duty of adequet size with all fittings and accessories with and including necessary junction box/sheet metal switch, socket and termination box complete including PVC insulated and unsheathed (FR-LSH) (conforming to IS-694) single core multi stranded copper conductor cable of size 1.5sqmm green colour as earth continuty conductor connected to common earth dolly for one 5/6 Amps socket outlet points controlled by one, one way switch on independent board complete all as specified and as directed. Note :- Red colored cable shall be used for live connection, black colored cable shall be used for neutral connection and green colored cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

Material and labour for point wiring with 4sqmm (nominal area) PVC insulated and unsheathed single core (FR-LSH) (conforming to IS-694) copper cable 1100 volts grade with multi stranded copper conductor in and including PVC casing capping heavy duty of adequet size with all fittings and accessories with and including necessary Junction box/ sheet metal switch, socket and termination box complete including PVC insulated and unsheathed (FR-LSH) (conforming to IS-694) single core multi stranded copper conductor cable of size 4sqmm green colour as earth continuty conductor connected to common earth dolly for one 5 pin 6/16 Amps socket outlet points controlled by one, one way switch on independent board complete all as specified and as directed. Note :- Red colored cable shall be used for live connection, black colored cable shall be used for neutral connection and green colored cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

Supply and fix surface & wall mounted LED batten 4 feets with 1x20 w indoor decorative luminaries with and including Electronic driver and 1 x20 Watt LED lamp, pre-wired including necessary electric connection from ceiling rose to light fitting, conforming to the following specifications: - (i) System Watts/lumens: - Max 20 W/Total system lumen not less than 2400 Lm. (ii) Housing: - Extruded polycarbonate. (iii) IP rating: - IP 20. (iv) Front cover: - Acrylic/polycarbonate cover. (v) Mounting: - Suitable for wall/ceiling mounting. (vi) Finish: - Smooth finish. (vii) Lamp: - High bright LED. (viii) System Efficacy (lm/Watt): - Not less than 120 lm/watt. (ix) Colour temperature: - Not less than 5700 Degree Kelvin. (x) Colour rendering index (CRI): - Not less than 80. (xi) Guaranteed Life: - Not less than 25000 hrs of operation. (xii) Optics: - Designed for optimum light distribution. (xiii) Control gear: - Inbuilt electronic driver with APFC, PF not less than 0.95, and THD not more than 20% of the standard operating voltage 180-270V Ac, 50 Hz. (xiv) Surge protection: - Inbuilt surge protection minimum 2 KV. (xv) Heat sink: - As per OEM's design. Note :- (i) Bidder has to compulsorily submit the LM-79 and LM-80 and NABL accredited lab test report conforming to technical specifications and consolidated lab report for the offered LED has to be structured in the same sequence. (ii) The light fittings shall be made in india and complying to the BIS codes No. IS: 16102, IS: 15885 and IS: 10322 with lattest up to date amendments.

Supply and fix surface & wall mounted LED batten 2 feets with 1x10 w indoor decorative luminaries with and including Electronic driver and 1 x10 Watt LED lamp, pre-wired including necessary electric connection from ceiling rose to light fitting, conforming to the following specifications: - (i) System Watts/lumens: - Max 10 W/Total system lumen not less than 1200 Lm. (ii) Housing: - Extruded polycarbonate. (iii) IP rating: - IP 20. (iv) Front cover: - Acrylic/polycarbonate cover. (v) Mounting: - Suitable for wall/ceiling mounting. (vi) Finish: - Smooth finish. (vii) Lamp: - High bright LED. (viii) System Efficacy (lm/Watt): - Not less than 120 lm/watt. (ix) Colour temperature: - Not less than 5700 Degree Kelvin.

(x) Colour rendering index (CRI): - Not less than 80. (xi) Guaranteed Life: - Not less than 25000 hrs of operation. (xii) Optics: - Designed for optimum light distribution. (xiii) Control gear: - Inbuilt electronic driver with APFC, PF not less than 0.95, and THD not more than 20% of the standard operating voltage 180-270V Ac, 50 Hz. (xiv) Surge protection: - Inbuilt surge protection minimum 2 KV. (xv) Heat sink: - As per OEM's design. Note :- (i) Bidder has to compulsorily submit the LM-79 and LM-80 and NABL accredited lab test report conforming to technical specifications and consolidated lab report for the offered LED has to be structured in the same sequence. (ii) The light fittings shall be made in india and complying to the BIS codes No. IS: 16102, IS: 15885 and IS: 10322 with lattest up to date amendments.

Supply and fix surface & wall mounted LED mirror light fittings with 10 w indoor decorative luminaries with and including Electronic driver and LED lamp, pre-wired including necessary electric connection from ceiling rose to light fitting, conforming to the following specifications: - (i) System Watts/lumens: - Max 10 W/Total system lumen not less than 1200 Lm. (ii) Housing: - Extruded polycarbonate. (iii) IP rating: - IP 20. (iv) Front cover: - Acrylic/polycarbonate cover (v) Mounting: - Suitable for wall/ceiling mounting. (vi) Finish: - Smooth finish. (vii) Lamp: - High bright LED. (viii) System Efficacy (lm/Watt): - Not less than 120 lm/watt. (ix) Colour temperature: - Not less than 5700 Degree Kelvin. (x) Colour rendering index (CRI): - Not less than 80. (xi) Guaranteed Life: - Not less than 25000 hrs of operation.

(xii) Optics: - Designed for optimum light distribution. (xiii) Control gear: - Inbuilt electronic driver with APFC, PF not less than 0.95, and THD not more than 20% of the standard operating voltage 180-270V Ac, 50 Hz. (xiv) Surge protection: - Inbuilt surge protection minimum 2 KV. (xv) Heat sink: - As per OEM's design. Note :- (i) Bidder has to compulsorily submit the LM-79 and LM-80 and NABL accredited lab test report conforming to technical specifications and consolidated lab report for the offered LED has to be structured in the same sequence. (ii) The light fittings shall be made in india and complying to the BIS codes No. IS: 16102, IS: 15885 and IS: 10322 with lattest up to date amendments.

Supply and fix LED street light fittings with 15 w outdoor decorative luminaries with and including Electronic driver and LED lamp, pre-wired including necessary electric connection from ceiling rose to light fitting, conforming to the following specifications: - (i) System Watts/lumens: - Max 15 W/Total system lumen not less than 1800 Lm. (ii) Housing: - Extruded polycarbonate. (iii) IP rating: - IP 65. (iv) Front cover: - Acrylic/polycarbonate cover (v) Mounting: - Suitable for wall/ceiling mounting including necessary MS Clamps, nuts and bolts. (vi) Finish: - Smooth finish. (vii) Lamp: - High bright LED. (viii) System Efficacy (lm/Watt): - Not less than 120 lm/watt. (ix) Colour temperature: - Not less than 5700 Degree Kelvin. (x) Colour rendering index (CRI): - Not less than 80. (xi) Guaranteed Life: - Not less than 25000 hrs of operation.

(xii) Optics: - Designed for optimum light distribution. (xiii) Control gear: - Inbuilt electronic driver with APFC, PF not less than 0.95, and THD not more than 20% of the standard operating voltage 180-270V Ac, 50 Hz. (xiv) Surge protection: - Inbuilt surge protection minimum 2 KV. (xv) Heat sink: - As per OEM's design. Note :- (i) Bidder has to compulsorily submit the LM-79 and LM-80 and NABL accredited lab test report conforming to technical specifications and consolidated lab report for the offered LED has to be structured in the same sequence. (ii) The light fittings shall be made in india and complying to the BIS codes No. IS: 16102, IS: 15885 and IS: 10322 with lattest up to date amendments.

Supplying and fixing Brush Less DC (BLDC) ceiling fan with the following specifications: - ((i) Motor: - Brushless DC 32 W, with operating voltage 140V-240V AC, 50 Hz.. (ii) Max RPM: - 360 RPM. (iii) Sweep: - 1200mm. (iv) Colour:- White. (v) Remote control operated. (vi) 5 STAR energy saving rating complete all as specified and as directed. Make:- Surya Model No. -SS-32 / Havells/Bajaj/ Crompton Greaves

Supplying and fixing exhaust fan noiseless, flush mounting square type body case , 200mm sweep with polycarbonate blades flush mounting AC single phase 230/240 volts, 50 Hz including necessary fixing accessories and make good of surfaces complete all as specified and as directed. Make : Havells/Bajaj/Crompton Greaves

Supplying and fixing power unit for 25 Amp with start stop switch inbuilt overload tripping system, single phase, AC 230/240 volts, 50 Hz including necessary fixing accessories, cover plate and make good of surfaces complete all as specified and as directed. Make :- Crabtree model Athena Cat No ACAO252504 or equivalent of make Legrand/Anchor/Havells

Material and Labour for Geyser Vertical type, 25 Ltrs capacity, AC 230V, 50HZ, with all mounting accessories and connecting pipe complete all as directed

Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cm x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts check nuts and washers of galvanised iron or steel using GI or steel wire 6 mm dia as earthing lead as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, charcoal dust, common salt, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregate pit, MS angle iron 40x40x3mm frame, 40mm thick RCC 1:2:4 type B1 pit cover reinforced with 8mm dia M.S ctd. bars @ 10 cm c/c both ways, 12mm dia M.S handle, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI medium grade complete earth lead protection pipe

Material & Labour for single phase electronic temper proof type energy meter having backlite LCD display of digit not less than 8.5mm x 5mm for metering of current, voltage, KW, KWh among others parameters, last 75 days history of KWh and demand in KW with optical communication port for downloading the data and push botton for manual scrolling. It shall be provided with RF module to enable metering data collection in wireless mode with MRI scanner. Meter shall directly operate with 240V AC, 50 Hz, supply with accuracy class of 1. Meter shall measured correctly for an operating voltage range from 90V AC to 300V AC with basic current rating from 05A to 30A (Max starting current should be 0.2% of basic current rating conforming to IS 13779). Meter shall have indication of pulse LED, phase abvailable indication and reserve indication. Meter shall have store data for 75 days with 30 min

integration period. Meter shall conforming to IS 13779 / CBIP 304 and shall have ISI marking. Meter shall be supplied with a transparent pilfer proof engineering grade plastic box with protection class of IP 51 with vermin, dust and shock proof and can freely house the meter. The door of hinge type meter box shall have 9 pin D type connector or USB connector to conncet with CMRI through cable. Any arrangement for direct access of optical port. Push button shall be fixed on the door to access data from meter without opening the meter box. The meter should log the magnetic influence tamper if affected and should record at Imax in that condition as per CBIP 304. The RF antenna should be separately fixed inside the meter and shall not be on board and the same card the RF module shall be peer to peer only when used with a Meter Reding Instrument (MRI) and shall not be crate a mesh. Mesh functionally shall be suported with a Data Connector Unit (DCU), if required in future, however, meter shall not required to be removed or replaced during up gradation from MRI based system to DCU based system. Make :- L&T; M/S LANDIS GEAR ; M/S SYSTEM SENSORS; M/S SECURE METERS

Supply only CMRI (Common Meter Reading Instrument) required for data downloading from meters. CMRI shall be provided with RF module to commumicate with each meter to download data from meter wirelessly. CMRI processor should be Intel 80C 386K or equivalent with operating system/ BIOS-MS DOS 6-22/ SANDS BIOS, memory (SRAM) expandable upto 16.5 MB minimum, alphanumeric LCD display, key sealed membrane, weight of CMRI shall not exceeds 1.2Kg and should operate satisfactorily for ambient temperature range of 10⁰ to 50⁰C with relative humidity 95%. The Rf module shall be connected to CMRI using DB9 serial cable. It Shall be possible to use the same DB9 serial port on the CMRI for downloading data from the meter optical port if required including base computer software fro downloading data from CMRI and shall be computable with windows operating system. Contractor shall provide 6 working days training to the operator after commissioning.

Material and labour for billing software for windows operating system for automatic bill generation from data, based as per OEMS of metermanufacturer recommendations and as per requirement to be given by Garrison Engineer complete all as specified and as directed.

Material and labour for service connection with 10sqmm, 2 core LT aluminium armoured cable complete all as specified and as directed.

Material and labour for sub main wiring with two runs of single core 4 Sqmm (nominal area) PVC insulated copper conductor FRLS (conforming to IS-694), stranded, unsheathed 1100 volts grade in PVC casing capping (heavy duty) of adequit size with all fittings and conduit accessories including one run 4 Sqmm single core unsheathed stranded copper conductor cable FRLS (conforming to IS-694) as earth wire complete all as specified and as directed. {Note:-(i) Two runs of cable with one runs earth wire and PVC casing capping shall be measured as one unit length. (ii) Extra length of cable required for connection to DBs shall be deemed to be included in the unit quoted rate and shall not be measured separately. (iii) Earth wire shall run inside the casing capping. (iv) Suitable color code of wire must be ensure for phase/ neutral/ earth.}

Supply and fixing MCB SP 240 volts 6 to 32 Amps, 10 kA, computable for DIN rail 'C' series complete all as specified and as directed.

Supply and fixing MCB SPN 240 volts 40 Amps, 10 kA, computable for DIN rail 'C' series complete all as specified and as directed.

Supply and fixing MCB SPN 240 volts 6 to 32 Amps, 10 kA, computable for DIN rail 'C' series complete all as specified and as directed.

Supply and fix 24 to 25 diameter of neck and length of bolt exc 86 cm and not exc 1.00m mild steel screw bolts(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square complete all as specified and as directed.