Northern Railway Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Northern Railway - NR Tender
Miscellaneous
Railway
Excavation
Ireps
Opening Date
3 Sep 2020Closing Date
25 Sep 2020Tender Amount
₹ 54,65,68,823Auction Start Date
13 Nov 2020Auction End Date
13 Nov 2020Costs
EMD
₹ 28,82,900Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Ayodhya - Sohawal Section (zone-iii) :earth Work In Formation Including Filling,cutting And compaction, Supply And Laying Blanketing Material On Embankment, Extension Of Existing minor Bridges By Rcc Box And Construction Of Lhs By Air Pushing Methodology And Misc. work Of Sohawal Station & Other Allied Works Between Ayodhya (excluding) To Sohawal (including) In Connection With ''proposed Doubling Of Barabanki-akbarpur (161 Km)" Of lucknow Division On Northern Railway.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
3279368Tender No
74-W-3-2-429-A-WA-LKOTender Authority
Northern Railway ViewPurchaser Address
-Website
http://nr.indianrailways.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Item No-033060 to 033064 ( Supplying and using cement ) PPC
-
-
1115813.08
All items of Chapter 4 Reinforced cement concrete of USOR 2010 expect item no-045010 to 045022.
-
-
147222.16
Item no-045010 to 045022 ( Supplying and using reinforcement steel ) of Chapter 4 Reinforced cement concrete of USOR 2010
-
-
15246874.8
All items of chapter -5- brick work of USOR 2010
-
-
230249.33
All items of chapter -8- steel & alluminium work of USOR 2010
-
-
105292.74
All items of chapter 11-Finishing masonary of USOR 2010
-
-
488262.57
All items of chapter -12- Painting,poilishing and varnishing of USOR 2010
-
-
65216.29
All items of chapter -13- Water supply of USOR 2010
-
-
26573.74
All items of chapter -14- Drainage & sewerage of USOR 2010
-
-
168103.23
All items of chapter -18- Dismantling and land scaping of USOR 2010
-
-
180478.67
All items of chapter -19- Bridge works sub structure of USOR 2010
-
-
6726508.42
All items of chapter -22- Bridge works Misc. of USOR 2010
-
-
3781265.04
All items of chapter -24- "Fencing and boundary marks". of USOR 2010
-
-
41614.29
Supplying and laying contractor's own blanketing materials on top of old / new embankment / cutting and compacting the same layer by using contractor's own suitable heavy vibratory rollers (10/12 Tonne) of layers of 30 cm thickness in loose state upto required degree of compaction to make the embankment to correct profile as per RDSO latest guide lines, Specifications and Special conditions of contract. The rates are inclusive of procurement of materials with all lead & lift machineries, equipment, labour, inclusive all taxes, royalties, octroi etc. 1 Complete and dressing all slopes and top surface to required camber to complete the work. Initially the width of the blanketing material will be kept 0.50 m extra beyond the designed profile width to facilitate the mechanical compaction of the bank upto the edge of the required profile and no extra payment for this 0.50m extra width of blanketing will be paid. However, after compaction, the loose soil in this extra width can be taken away and used else where. Note-(i) During execution of work, contractor is to provide pegs @ 50 mtr c/c at 1 mtr away from the toe of bank and the same is to be maintaned till commissioning of doubling. (ii) similarly center line pegs @ 50 mtr c/c are also to be provided and maintaned for providing center line for the track linking.
55000
2550
140259350
Providing "Prepared Subgrade" equivalent to B-2 type (SQ-2) soil as per latest RDSO specifications for design of formation for heavy axel load" in layers of approved thickness below blanketing, for making top layer in embankment , all constituent materials including earth to be entirely arranged by the contractor at his own cost. Rates shall be inclusive of all lead, lifts, ascent, descent, crossing of nallahs or any other obstructions. The rate shall also be inclusive of blending of materials to achieve specifications of B-2 soil, all dressing, leveling and finishing of bank to final profiles, initial site clearance (if any), demarcation and setting out of profile (if required), cutting down of trees/ shrubs/ roots of vegetation growth/ heavy grass etc, benching (30 cm vertical & 60 cm 2 horizontal), including all lead ,lifts handling & re-handling charges with all taxes, octroi & royalty etc as a complete job. Arrangement of T&P (heavy vibratory rollers, 10/12 Tonne, etc) for proper compaction and necessary arrangement of watering shall be done (under this item) by the contractor for achieving OMC and required density (nothing extra will be paid for compaction of earthwork under this item). The payment shall be made by taking initial and finished cross section at every 25m/change of profile and only the work falling within the design profile shall be paid under this item. Note:-(i) During execution of work, contractor is to provide pegs @ 50 mtr c/c at 1 mtr away from the toe of bank and the same is to be maintaned till commissioning of doubling. (ii) similarly center line pegs @ 50 mtr c/c are also to be provided and maintaned for providing center line for the track linking. (iii) 5% deduction for shrinkage shall be done on compacted earth work.
71000
924
65627430
Providing and laying Jute Geo-Textile (JGT) in slopes of Railway embankment in accordance with 3 RDSO's guidelines for application of Jute Geotextile in Railway embankments and hill slopes no. RDSO/2007/GE:G-0008 or its subsequent versions, including incidental earthwork and fixing arrangements with GJ-Type-2.
260
126
32882.2
Supplying and laying of Biaxial Geo-grid, made from virgin high density polypropylene, having 4 aperture size of 65mmx 65mm and ultimate tensile strength of 30 kN/m with minimum junction efficiency of 95% & minimum radial stiffness of 350 kN/m (@ 0.5% strain) and laying below ballast over formation, including transportation, contractor's labour, lead and lift complete as per directions of Engineer-in-charge
260
205
53521
Supplying and laying of non-woven Geotextile made from polypropylene multifilament yarn, having minimum mass of 300 GSM & ultimate tensile strength of 20 kN/m with puncture resistance of 350N and apparent opening size of 150 microns and laying at interface of sub-grade top of formation including over lapping of 30.0 5 cm of about 50.0 mtr longitudinal distance or as per site requirement ,transportation, contractor labour, lead and lift, cutting of rolls in to required length for enabling to laying with BCM along with deep screening of track by railway ballast cleaning machining work including all taxex royalty. and etc including crossing of track as direction of Engineer in charge at site include as per direction of Engineer in charge. This item includes maintenance, testing & supply of Biaxial Geo-grid.
260
124
32260.8
Providing and laying RCC of specified grade (precast) M-35-as per approved plan and mix design with coarse sand and stone aggregate of 20 mm and down gauge in Box Segments for all heights and depths including compaction of concrete by electric/mechanical vibrator, providing and using admixture in recommended proportion as per IS-456, IRC -112 & IS-9103, concrete bridge code applicable as per approved mix design complying with Appropriate cement content, minimum water cement ratio and slump as specified, produced by RMC plant/automatic computerized batching plant and placed using concrete pump including designing of concrete mix, finishing the exposed surface of concrete, curing of concrete as required in IRC-112/IRS-CBC/IS codes as applicable, including all lead by transit mixer (Crossing of stream, nallahs, railway tracks, level crossings 6 or any other obstruction such as traffic jam whatsoever), lift, pumping, ascend, descend, loading, unloading, handling, wastage if any, cost of all safety works and safety precautions with all labour, arrangements for cold weather and hot weather concrete as applicable, taxes and royalty as a complete job as per specification and as per directions of Engineer in Charge. Nothing extra will be paid on any account. The rate will also include cost of OPC cement and admixture (Plasticizer, super plasticizer, or retarder etc) as per approved mix. design. Note- 1. Payment of reiforcement steel including Cutting,straightening, hooking, bending, binding, uncoiling, and placing in position including cost of binding wire and shuttering shall be paid extra under relevant item of USOR - 2010. 2. Mode of payment.:- On sucessful casting and testing of RCC segments, 70% of the payment against this item will be released. 3. 25 % payment will be released after sucessful pushing/placement of the precast RCC segment. 4 Balance 5% payment will be released on commissioning of LHS
10
10906
109067.2
"Providing and laying RCC of specified grade (precast) M-25-as per approved plan and mix design with coarse sand and stone aggregate of 20 mm and down gauge in base slab for all heights and depths including compaction of concrete by electric/mechanical vibrator, providing and using admixture in recommended proportion as per IS-456, IRC -112 & IS-9103, concrete bridge code applicable as per approved mix design complying with Appropriate cement content, minimum water cement ratio and slump as specified, produced by RMC plant/automatic computerized batching plant and placed using concrete pump including designing of concrete mix, finishing the exposed surface of concrete, curing of concrete as required in IRC-112/IRS-CBC/IS codes as applicable, including all lead by transit mixer (Crossing of stream, nallahs, railway tracks, level crossings 7 or any other obstruction such as traffic jam whatsoever), lift, pumping, ascend, descend, loading, unloading, handling, wastage if any, cost of all safety works and safety precautions with all labour, arrangements for cold weather and hot weather concrete as applicable, taxes and royalty as a complete job as per specification and as per directions of Engineer in Charge. Nothing extra will be paid on any account. The rate will also include cost of OPC cement and admixture (Plasticizer, super plasticizer, or retarder etc) as per approved mix. design. Note- 1. Payment of reiforcement steel including Cutting,straightening, hooking, bending, binding, uncoiling, and placing in position including cost of binding wire and shuttering shall be paid extra under relevant item of USOR - 2010. 2. Mode of payment.:- On sucessful casting and testing of RCC segments, 70% of the payment against this item will be released. 3. 25 % payment will be released after sucessful pushing/placement of the precast RCC segment. 4 Balance 5% payment will be released on commissioning of LHS "
10
10466
104666.9
"Placement of pre cast RCC segmental box and base slab with the help of road crane at desired location, carefully by lifting and packing method, during traffic and power block with all contractor labour, tools and material, crane, machinery, preparation of surface as directed by Engineer, including filling of joints by epoxy 8 mortar and laying of required sand (Cost of sand in cluded in item) including all material and labour, tools, plants, machinery etc with all lead and lift. if during the placement any segment is damaged, the cost shall be borne by the contractor. Note: (i) 60% Payment will be made after placement of precast RCC segments and base slab. (ii) Balance 40% will be made after filling of joints by epoxy mortar etc.(iii) No. of cranes & T&P for placing as per clause 24.7. No seprate or extra payment for crane and will be made and this item shall be inclusive of all machinary & plant crane charge etc."
20
14474
289494.8
"Providing and laying RCC of specified grade (Cast in situ) M-35 as per approved plan and mix design with coarse sand and stone aggregate of 20 mm and down gauge in Box Segments and base slab, for all heights and depths including compaction of concrete by electric/mechanical vibrator, providing and using admixture in recommended proportion as per IS-456, IRC -112 & IS-9103, concrete bridge code applicable as per 9 approved mix design complying with Appropriate cement content, minimum water cement ratio and slump as specified, produced by RMC plant/automatic computerized batching plant and placed using concrete pump including designing of concrete mix, finishing the exposed surface of concrete, curing of concrete as required in IRC-112/IRS-CBC/IS codes as applicable, including all lead by transit mixer (Crossing of stream, nallahs, railway tracks, level crossings or any other obstruction such as traffic jam whatsoever), lift, pumping, ascend, descend, loading, unloading, handling, wastage if any, cost of all safety works and safety precautions with all labour, arrangements for cold weather and hot weather concrete as applicable, taxes and royalty as a complete job as per specification and as per directions of Engineer in Charge. Nothing extra will be paid on any account. The rate will also include cost of OPC cement and admixture (Plasticizer, super plasticizer, or retarder etc) as per approved mix. design. Note- 1. Payment of reiforcement steel including Cutting,straightening, hooking, bending, binding, uncoiling, and placing in position including cost of binding wire and shuttering shall be paid extra under relevant item of USOR - 2010. Nothing extra will be paid on any account. The rate will also include cost of OPC cement and admixture (Plasticizer, super plasticizer, or retarder etc) as per approved mix. design. "
1470
10238
15050462.7
"Providing and laying RCC of Specified grade -M-25 cast in situ as per approved plan and mix design with coarse sand and stone aggregate of 20mm and down gauge for all height and depths in Retaining/Wing/Return walls including compaction of concrete by electrical/mechanical vibrator, providing and using admixture in recommended proportion as per IS 456, IS-9103 & concrete bridge code applicable as per approved mix design with Appropriate cement content, minimum water cement ratio and slump as specified produced by RMC plant/automatic computerized/electronic batching plant and placed using concrete pump including designing of concrete mix, finishing the exposed surface of concrete, curing of concrete as required in 10 IRC-112/IRS-CBC/IS codes as applicable, including all lead by transit mixer (crossing of stream, nallahs, railway tracks, level crossings or any other obstruction such as traffic jam whatsover), lift, pumping, ascend, descend, loading, unloading, handling, wastages if any, cost of all safety works and safety precautions with all labour, arrangements for cold weather and hot weather concreting as applicable, taxes and royality etc.including providing and fixing 75 mm dia AC/PVC pipe for weep holes @ 1.5 mtr centre to centre horizontally and 1.0 mtr c/c vertically etc as a complete job as per specification and as per directions of engineer in charge. Nothing extra will be paid on any account. The rate will also include cost of OPC cement, admixture (plasticizer, super plasticizer, or retarder etc.) as per approved mix design. Note- Payment of reinforcement steel including cutting, straightening, hooking, bending, binding, placing in position including cost of binding wire and shuttering shall be paid extra under relevant item of USOR-2010). "
1575
9898
15590515.5
"Supplying and filling well hand packed boulders / cobbles which shall be sound , hard and durable and as per approved drawing & as per direction of engineer-in-charge behind abutments , wings, retaining walls 11 as directed by engineer-in-charge , including all leads , lifts , octroi , royalty , taxes , ascents , descents , crossing of tracks , nallahs , level crossing and any other obstruction whatsoever including all labour and material as a complete job with stone not less than 15cm in all directions and not less than 15 kg except smaller boulders required for filling voids . Note: Measurement shall be made as per finished profile and deduction shall be made@ 15% from actual site profile measurements for voids and shrinkage. "
1050
2644
2776431
"Providing and laying in position MCC of M25 grade cast in situ as per approved plan and mix design with coarse sand and stone aggregate of 20mm and down gauge in foundation and above in Retaining wall / Wing wall / Return wall/ Toe wall for all heights and depths including compaction of concrete by electrical/mechanical vibrator, providing and using admixture in recommended proportion as per IS 456, IS-9103 & concrete bridge code applicable as per approved mix design with Appropriate cement content, minimum water cement ratio and slump as specified in special conditions produced by RMC plant/automatic computerized/electronic batching plant and placed using concrete pump including designing of concrete mix, 12 finishing the exposed surface of concrete, curing of concrete as required including all lead by transit mixer (crossing of stream, nallahs, railway tracks, level crossings or any other obstruction such as traffic jam etc.), lift, pumping, ascend, descend, loading, unloading, handling, wastages if any, cost of all safety works and safety precautions with all labour, arrangements for cold weather and hot weather concreting as applicable, taxes and royality etc. as a complete job as per specifications and directions of engineer in charge. Nothing extra will be paid on any account. The rate will also include cost of OPC cement, admixture (plasticizer, super plasticizer, or retarder etc.) as per approved mix design. Note-Reinforcement steel including cutting, straightening, hooking, bending, binding, placing and keeping and maintaining in position including cost of binding wire and shuttering will be arranged by contractor and payment will be made separately under relevant items of USOR-2010). "
525
9717
5101598.25
"Providing and fixing safety fencing with RCC post and GI barbed wire type II , IS : 278 line wire 2 nos 2.5mm dia each and point wire 2.5mm dia at 150mm centre to centre distance. The GI barbed wire shall be fixed to RCC post in three horizontal rows, at specified interval, and two diagonal. The RCC post shall be of 100mm x 100mm size at horizontal distance of 5m c/c with concrete mix of 1:1-1/2:3 ( 1 cement: 1-1/2 coarse sand: 3 stone chips of 20mm of nominal size. These RCC posts shall be painted with white and red band alternately at the distance of 300mm, as per approved drawing or as directed by engineer in charge. The height of 13 RCC post shall be 1.5 metre above formation level and depth below formation level shall be 450mm with same size. This post shall be embedded in the concrete block of size 600mm x 600mm x 600 mm with concrete mix 1:3:6 ( 1 cement: 3 coarse sand: 6 stone chips of 40mm nominal size) as per approved plan for all heights and depths including cost of shuttering , centering scaffolding, uncoiling, straightening, cutting, placing and keeping in position steel reinforcement including cost of binding wires, mechanical mixing and vibrating of concrete, curing of concrete for a specified period, use of admixtures, if required, rendering and finishing the exposed surfaces of concrete with carborandum stone, with all labour and material as a complete job as per specifications and conditions of contract (cement shall be arranged by the contractor and payment shall be made separately under relevant USOR-10 items). " "The cost of steel reinforcement is included in this item for which no extra payment shall be made to contractor. RCC post and barbed wire fencing shall be dismantled by the contractor at his own cost on completion of work and dismantled material i.e. barbed wire fencing is property of contractor. The fencing work shall be maintained during the currency of work after doubling is commissioned. Note:- 1. Maximum 80% payment will be made in on account bill after providing and fixing of fencing as described above. 2. Remaining 20% amount shall be released to the contractor after completion of work. "
22000
178
3932060
Providing and laying in position reinforced cement concrete of M35 grade cast in situ as per approved plan and mix design with coarse sand and stone aggregate of 20mm and down gauge in raft/open foundation & substructure (retaining wall/wing wall/return wall) including compaction of concrete by electrical/mechanical vibrator, providing and using admixture in recommended proportion as per IS 456, IS-9103 & concrete bridge code applicable as per approved mix design with Appropriate cement content, minimum water cement ratio and slump as specified produced by RMC plant/automatic computerized batching plant and placed using concrete pump including designing of concrete mix, finishing the exposed surface of concrete, curing of 14 concrete as required in IRC-112/IRS-CBC/IS codes as applicable, including all lead by transit mixer (crossing of stream, nallahs, railway tracks, level crossings or any other obstruction such as traffic jam whatsover) lift, pumping, ascend, descend, loading, unloading, handling, wastages if any, cost of all safety works and safety precautions with all labour, arrangements for cold weather and hot weather concreting as applicable, taxes and royality etc. as a complete job as per specifications and directions of engineer in charge. Nothing extra will be paid on any account. The rate will also include cost of OPC cement, admixture (plasticizer, super plasticizer, or retarder etc.) as per approved mix design.Note-Payment of reinforcement steel including cutting, straightening, hooking, bending, binding, uncoiling and placing in position including cost of binding wire and shuttering will be paid extra under relevent item of USOR-2010
25
9945
248635.5
All items of chapter-1 "Earth work " of USOR-2010
-
-
155778.04
All items of chapter-2 "Carriage of Materials " of USOR-2010
-
-
523262.22
All items of chapter-3 "Plain concrete " of USOR-2010 except item no. 033060 to 033064
-
-
18109.55
Item No-033060 to 033064 (Supplying and using cement) PPC
-
-
1434616.81
All items of Chapter 4 Reinforced cement concrete of USOR 2010 expect item no-045010 to 045022.
-
-
276647.28
Item no-045010 to 045022 (Supplying and using reinforcement steel) of Chapter -04 Reinforced cement concrete of USOR 2010
-
-
33702674.46
All items of chapter -5- brick work of USOR 2010
-
-
47636.06
All items of chapter -8- steel & alluminium work of USOR 2010
-
-
10123538.73
All items of chapter -12- Painting, poilishing and varnishing of USOR 2010
-
-
360605.35
All items of chapter -14- Drainage & sewerage of USOR 2010
-
-
250109.78
All items of chapter -17- Miscellaneous Building Works of USOR 2010
-
-
752710.08
All items of chapter -18- Dismantling and land scaping of USOR 2010
-
-
64412.06
All items of chapter -19- Bridge works sub structure of USOR 2010
-
-
12425669.61
All items of Chapter-21 "Bridge Works Super Structure- Steel" of USOR-2010
-
-
5878673.43
All items of chapter -22- Bridge works Misc. of USOR 2010
-
-
2091302.17
All items of chapter -23- Roads and platform works of USOR 2010
-
-
162565.02
"Providing and laying RCC of specified grade (precast) M-35-as per approved plan and mix design with coarse sand and stone aggregate of 20 mm and down gauge in Box Segments, base slab & splayed wing wall for all heights and depths including compaction of concrete by electric/mechanical vibrator, providing and using admixture in recommended proportion as per IS-456, IRC -112 & IS-9103, concrete bridge code applicable as per approved mix design complying with Appropriate cement content, minimum water cement ratio and slump as specified, produced by RMC plant/automatic computerized batching plant and placed using concrete pump including designing of concrete mix, finishing the exposed surface of concrete, curing of concrete as required in IRC-112/IRS-CBC/IS codes as applicable, including all lead by transit mixer (Crossing of stream, nallahs, railway 1 tracks, level crossings or any other obstruction such as traffic jam whatsoever), lift, pumping, ascend, descend, loading, unloading, handling, wastage if any, cost of all safety works and safety precautions with all labour, arrangements for cold weather and hot weather concrete as applicable, taxes and royalty as a complete job as per specification and as per directions of Engineer in Charge. Nothing extra will be paid on any account. The rate will also include cost of OPC cement and admixture (Plasticizer, super plasticizer, or retarder etc) as per approved mix. design. Note- 1. Payment of reiforcement steel including Cutting,straightening, hooking, bending, binding, uncoiling, and placing in position including cost of binding wire and shuttering shall be paid extra under relevant item of USOR - 2010. 2. Mode of payment.:- On sucessful casting and testing of RCC segments, 70% of the payment against this item will be released. 3. 25 % payment will be released after sucessful pushing/placement of the precast RCC segment. 4. Balance 5% payment will be released on commissioning of LHS "
20
9873
197472.4
"Providing and laying RCC of specified grade (precast) M-25-as per approved plan and mix design with coarse sand and stone aggregate of 20 mm and down gauge in base slab for all heights and depths including compaction of concrete by electric/mechanical vibrator, providing and using admixture in recommended proportion as per IS-456, IRC -112 & IS-9103, concrete bridge code applicable as per approved mix design complying with maximum cement content, minimum water cement ratio and slump as specified, produced by RMC plant/automatic computerized batching plant and placed using concrete pump including designing of concrete mix, finishing the exposed surface of concrete, curing of concrete as required in IRC-112/IRS-CBC/IS codes as applicable, including all lead by transit mixer (Crossing of stream, nallahs, railway tracks, level crossings 2 or any other obstruction such as traffic jam whatsoever), lift, pumping, ascend, descend, loading, unloading, handling, wastage if any, cost of all safety works and safety precautions with all labour, arrangements for cold weather and hot weather concrete as applicable, taxes and royalty as a complete job as per specification and as per directions of Engineer in Charge. Nothing extra will be paid on any account. The rate will also include cost of OPC cement and admixture (Plasticizer, super plasticizer, or retarder etc) as per approved mix. design. Note- 1. Payment of reiforcement steel including Cutting,straightening, hooking, bending, binding, uncoiling, and placing in position including cost of binding wire and shuttering shall be paid extra under relevant item of USOR - 2010. 2. Mode of payment.:- On sucessful casting and testing of RCC segments, 70% of the payment against this item will be released. 3. 25 % payment will be released after sucessful pushing/placement of the precast RCC segment. 4 Balance 5% payment will be released on commissioning of LHS "
2
9512
19024.76
"Placement of pre cast RCC segmental box and base slab with the help of road crane at desired location, carefully by lifting and packing method, during traffic and power block with all contractor labour, tools and material, crane, machinery, preparation of surface as directed by Engineer, including filling of joints by epoxy 3 mortar and laying of required sand (Cost of sand in cluded in item) including all material and labour, tools, plants, machinery etc with all lead and lift. if during the placement any segment is damaged, the cost shall be borne by the contractor. Note: (i) 60% Payment will be made after placement of precast RCC segments and base slab. (ii) Balance 40% will be made after filling of joints by epoxy mortar etc.(iii) No. of cranes & T&P for placing as per clause . No seprate or extra payment for crane will be made and this item shall be inclusive of all machinary & plant crane charge etc."
22
13103
288280.74
"Providing and laying RCC of specified grade (Cast in situ) M-35 as per approved plan and mix design with coarse sand and stone aggregate of 20 mm and down gauge in Box Segments and base slab for all heights and depths including compaction of concrete by electric/mechanical vibrator, providing and using admixture in recommended proportion as per IS-456, IRC -112 & IS-9103, concrete bridge code applicable as per approved mix design complying with maximum cement content, minimum water cement ratio and slump as specified, produced by RMC plant/automatic computerized batching plant and placed using concrete pump including designing of concrete mix, finishing the exposed surface of concrete, curing of concrete as required in 4 IRC-112/IRS-CBC/IS codes as applicable, including all lead by transit mixer (Crossing of stream, nallahs, railway tracks, level crossings or any other obstruction such as traffic jam whatsoever), lift, pumping, ascend, descend, loading, unloading, handling, wastage if any, cost of all safety works and safety precautions with all labour, arrangements for cold weather and hot weather concrete as applicable, taxes and royalty as a complete job as per specification and as per directions of Engineer in Charge. Nothing extra will be paid on any account. The rate will also include cost of OPC cement and admixture (Plasticizer, super plasticizer, or retarder etc) as per approved mix. design. Note- 1. Payment of reiforcement steel including Cutting,straightening, hooking, bending, binding, uncoiling, and placing in position including cost of binding wire and shuttering shall be paid extra under relevant item of USOR - 2010. "
1875
9304
17446725
Providing and laying in position reinforced cement concrete of M35 grade cast in situ as per approved plan and mix design with coarse sand and stone aggregate of 20mm and down gauge in raft/open foundation, substructure & super structure (retaining wall/wing wall/return wall) including Thrust bed compaction of concrete by electrical/mechanical vibrator, providing and using admixture in recommended proportion as per IS 456, IS-9103 & concrete bridge code applicable as per approved mix design with Appropriate cement content, minimum water cement ratio and slump as specified produced by RMC plant/automatic computerized batching plant and placed using concrete pump including designing of concrete mix, finishing the exposed surface of 5 concrete, curing of concrete as required in IRC-112/IRS-CBC/IS codes as applicable, including all lead by transit mixer (crossing of stream, nallahs, railway tracks, level crossings or any other obstruction such as traffic jam whatsover) lift, pumping, ascend, descend, loading, unloading, handling, wastages if any, cost of all safety works and safety precautions with all labour, arrangements for cold weather and hot weather concreting as applicable, taxes and royality etc. as a complete job as per specifications and directions of engineer in charge. Nothing extra will be paid on any account. The rate will also include cost of OPC cement , admixture (plasticizer, super plasticizer, or retarder etc.) as per approved mix design.Note-Payment of reinforcement steel including cutting, straightening, hooking, bending, binding, uncoiling and placing in position including cost of binding wire and shuttering will be paid extra under relevent item of USOR-2010
4070
8984
36567973.2
"Providing and laying RCC of Specified grade -M-25 cast in situ as per approved plan and mix design with coarse sand and stone aggregate of 20mm and down gauge for all height and depths in Retaining/Wing/Return walls including compaction of concrete by electrical/mechanical vibrator, providing and using admixture in recommended proportion as per IS 456, IS-9103 & concrete bridge code applicable as per approved mix design with Appropriate cement content, minimum water cement ratio and slump as specified produced by RMC plant/automatic computerized/electronic batching plant and placed using concrete pump including designing of concrete mix, finishing the exposed surface of concrete, curing of concrete as required in 6 IRC-112/IRS-CBC/IS codes as applicable, including all lead by transit mixer (crossing of stream, nallahs, railway tracks, level crossings or any other obstruction such as traffic jam whatsover), lift, pumping, ascend, descend, loading, unloading, handling, wastages if any, cost of all safety works and safety precautions with all labour, arrangements for cold weather and hot weather concreting as applicable, taxes and royality etc.including providing and fixing 75 mm dia AC/PVC pipe for weep holes @ 1.5 mtr centre to centre horizontally and 1.0 mtr c/c vertically etc as a complete job as per specification and as per directions of engineer in charge. Nothing extra will be paid on any account. The rate will also include cost of OPC cement , admixture (plasticizer, super plasticizer, or retarder etc.) as per approved mix design. Note-Payment of reinforcement steel including cutting, straightening, hooking, bending, binding, placing in position including cost of binding wire and shuttering shall be paid extra under relevant item of USOR-2010). "
10
8961
89611.1
"""Providing and laying CC of specified grade cast in situ as per approved plan and mix design with coarse sand and stone aggregate of 40 mm nominal size for all heights and depths in pavements,roads etc. including compaction of concrete by electric/mechanical vibrator, providing and using admixture in recommended proportion as per IS-456, & IS-9103 concrete bridge code applicable as per approved mix design complying with maximum cement content, minimum water cement ratio and slump as specified produced by RMC plant/automatic computerized batching plant and placed using concrete pump including designing of concrete 7 mix,making required slope and camber,providing and filling construction & dummy joints with approved joint filler (conforming to grade B of IS 1834) rounding of the edges making and filling the grooves as per drawing, finishing the exposed surface of concrete including cost of steel form work, curing of concrete as required in IRC-112/IRS- CBC/IS codes as applicable, including all lead by transit mixer (Crossing of stream, nallahs, railway tracks, level crossings or any other obstruction such as traffic jam whatsoever), lift, pumping, ascend, descend, loading, unloading, handling, wastage if any, cost of all safety works and safety precautions with all labour, arrangements for cold weather and hot weather concrete as applicable, taxes and royalty etc. as a complete job as per specification and as per directions of Engineer in Charge. Nothing extra will be paid on any account. The rate will also include cost of OPC cement and admixture (Plasticizer, super plasticizer, or retarder etc) as per approved mix. design. " Per Track
40
5379
215176.8
"Supplying and filling/pitching well hand packed boulders / cobbles which shall be sound , hard and durable and as per approved drawing & as per direction of engineer-in-charge behind abutments , wings, 11 retaining walls as directed by engineer-in-charge , including all leads , lifts , octroi , royalty , taxes , ascents , descents , crossing of tracks , nallahs , level crossing and any other obstruction whatsoever including all labour and material as a complete job with stone not less than 15cm in all directions and not less than 15 kg except smaller boulders required for filling voids . Note: Measurement shall be made as per finished profile and deduction shall be made@ 15% from actual site profile measurements for voids and shrinkage. "
750
2393
1795305
"Providing and laying in position MCC of M25 grade cast in situ as per approved plan and mix design with coarse sand and stone aggregate of 20mm and down gauge in foundation and above in Retaining wall / Wing wall / Return wall/ Toe wall for all heights and depths including compaction of concrete by electrical/mechanical vibrator, providing and using admixture in recommended proportion as per IS 456, IS-9103 & concrete bridge code applicable as per approved mix design with minimum cement content, maximum water cement ratio and slump as specified in special conditions produced by RMC plant/automatic computerized/electronic batching plant and placed using concrete pump including designing of concrete mix, 12 finishing the exposed surface of concrete, curing of concrete as required including all lead by transit mixer (crossing of stream, nallahs, railway tracks, level crossings or any other obstruction such as traffic jam etc.), lift, pumping, ascend, descend, loading, unloading, handling, wastages if any, cost of all safety works and safety precautions with all labour, arrangements for cold weather and hot weather concreting as applicable, taxes and royality etc. as a complete job as per specifications and directions of engineer in charge. Nothing extra will be paid on any account. The rate will also include cost of OPC cement, admixture (plasticizer, super plasticizer, or retarder etc.) as per approved mix design.Note-Reinforcement steel including cutting, straightening, hooking, bending, binding, placing and keeping and maintaining in position including cost of binding wire and shuttering will be arranged by contractor and payment will be made separately under relevant items of USOR-2010). "
75
8399
629930.25
Design, supplying, cutting, fixing and fabrication Steel Sheet pile of required shape size, thickness, 13 depth and weight confirming to IS-2314 including loading, unloading, leading assembling and driving at site with use of vibro-hammer as directed by site engineer including all labour, material and taxes as a complete job. Note- Work shall be executed as per provisions of Appendix-VII of IRS-b-2001 of indian Railway unified standard specifications.
67500
147
9958950
Launching of railway's relieving girder of overall length up to 12 to 22 metre after removing track, ballast, excavation earth on properly prepared wooden/cc cribs supports as per the approved scheme of launching, Railway drawing and specifications, by contractor's road crane including all tools, plants, machinaries, 14 labour, equipments etc. The work includes fixing of track i.e. Steel channel sleepers, rails & fittings as per railway specifications and standards on the relieving girder and necessary adjustments in the longitudinal and cross levels including lifting and packing at approaches of girders after insertion of relieving girder in track to maintain safety of trains on the relieving girder and its approaches. Note:- RH girder, sleepers, rails & fittings will be provided by railway.
60
6590
395400
De-launching of Railway's 12 to 22 M long relieving girder from bridges and stacking at suitable 15 location as per direction of Engineer in charge with contractor's labour, trailer, cranes, derricks, tools and plants, equipments, consumbles etc. Complete as per specifications, special conditions and detailed scope of work furnished in the tender and as directed by the engineer in charge. Note:- The rate shall be inclusive of dismentling of track fixed on girder.
60
3297
197859.6
Pushing of pre cast RCC segment of external dimensions ( 10.00 X 7.15 Mtr )through air pressure method under neath of already placed service girder between both side machinery wall and over base concrete including proper placement adjustment gap filling with cement mortar and pravell complete of site incharge.
15
19081
286222.05
Pushing of pre cast RCC segment of external dimensions ( 6.80 X 6.45 Mtr )through air pressure method under neath of already placed service girder between both side machinery wall and over base concrete including proper placement adjustment gap filling with cement mortar and pravell complete of site incharge.
30
15965
478964.1
Providing and fixing of self supported arch shaped mechanically seamed trussless galvalume roofing system such as Proflex or similar as approved by Engineer in-charge,made of superior quality structural grade steel,having 350 MPA yield strength,precoated galvalume sheet as per ASTM A 792 M of base thickness 1.0mm (tolerance +/- .02mm) with minimum coating mass as per AZM 150.Total coated thickness 1.075mm (tolerance +/- .02mm).Roofing should be designed as per ASCE 7-20 international building code 2002.The analysis shall be carried out for span and center arch-rise considering the required live load ,wind load ,dead load,and the seismic factor. The roof panel formation shall be done as per the required length and curvature using hydraulic profile machine to give it the trapezoidal shape in required curvature.In this process the width of the sheet reduced from .914 metre to 0.61 meter (tolerance +/- .02mm).The roof panel shall be lifted using a suitable crane and using a spreader bar and sling evenly placed to ensure no distortion of the panel during lifting and placing .The crane shall hold/support the panel till the alignment is done and completed using a plumb and water tube and bolted into beam. These curved panels have interlocking formation and are crimped together using mechanical seaming machine,which imposes a load of approximately five tones to insure the seaming of 18 required rigidity.After seaming a clear epoxy lacquer is applied on the inner sideof panel end in 15cm width to form a protective layer between panel and concrete beam.These panels are installed over existing water proof concrete gutter-beams having beveled edge to recieve(support) curved panels.Beams shall design for arch reaction and vertical loads.Plaster shall not be applied on the beam.Schmidt hammer test of the concrete should be carried out before erection to ensure that the anchor bolt can be securely fixed on support .In case of steel structure a steel runner plate of 6mm thickness and G.I sheet gutter of suitable size shall be provided for installation of panels ,G.I anchor bolt of required sizes and type with G.I washer and neoprene washer shall be provided as per design.After installation of panels ,trapezoidal voids are created between gutter-beam and panels which should be covered by a flashing fabricated or brick masonary which is to be paid seperately.Area of this roof shall be measured along the peripheri of hem-top between end to end of panels.Ridge and valley shall not be taken into consideration for measuring length tranverse to peripheri. The rate includes supplying ,fixing,loading unloading ,hire charges of all plants machineries,anchors,fasteners,washers,bolts,epoxy,paint and all wastage etc.complete,The rate includes supplying and fixing accessories and fixtures like hangers/clamps for installation of lighting/fixtures/utility/duct as per requirement.This item shall be executed only by the agency,which has all require manufacturing machineries and neccesary expertise.
5200
2078
10806276
Providing & laying 2000 mm dia non pressure NP-3 Class RCC Hume pipe with collars, jointing with 1:2 cement and ordinary sand mortar including testing of joints ,but excluding earthwork with all labour and material as a complete job .Cement for mortar will be paid separately.
38
15409
585577.72
"Supplying, providing, tightening of all types of High strength frictional grip (HSFG) bolts, nuts & washers/DTI washers conforming to IS: 4000:1992, IS 3757:1985(reaffirmed 2003), IS 6623:2004 & IS 6649 having property class 8.8/10.9 as decided by Engineer in charge, diameter preferred/non preferred sizes, length 20 as desired/designed with coating consisting of Zinc phosphate as per IS 1367 (Pt-XII) in all type of steel girder Road/Rail. Rate include tightening of all the types of HSFG bolts at stress level as per IS: 4000, at all height including fixtures, back up supports, accessories, transporting to site, including loading, unloading, lift and taxes complete. Trained personnel shall carryout the tightening/installation of HSFG bolts. For HSFG bolts, minimum two washers shall be provided, one DTI & one plain washer.Guide lines as per IRS B-1 (latest version) & RDSO report no. BS-111(Revision 2) to be followed. Summary of BS111(Rev 2) provisions have been enclosed as special specifications. "
750
242
182212.5
All items of chapter-1 "Earth work " of USOR-2010
-
-
3039711.31
All items of chapter-2 "Carriage of Materials " of USOR-2010
-
-
21903.55
All items of chapter-3 "Plain concrete " of USOR-2010 except item no. 033060 to 033064
-
-
9939813.88
Item No-033060 to 033064 (Supplying and using cement) OPC-43 Grade
-
-
82624.56
Item No-033060 to 033064 (Supplying and using cement) PPC
-
-
7970093.4
All items of Chapter 4 Reinforced cement concrete of USOR 2010 expect item no-045010 to 045022.
-
-
11591463.3
Item no-045010 to 045022 ( Supplying and using reinforcement steel ) of Chapter 4 Reinforced cement concrete of USOR 2010
-
-
9494115.1
All items of chapter -5- brick work of USOR 2010
-
-
3157182.66
All items of chapter -7- wood work of USOR 2010
-
-
107618.43
All items of chapter -8- steel & alluminium work of USOR 2010
-
-
9543211.83
All items of chapter -9- flooring ,paving & dado of USOR 2010
-
-
19077249.65
All items of chapter -10- Roofs & ceiling of USOR 2010
-
-
915656.44
All items of chapter 11Finishing masonary of USOR 2010
-
-
604733.74
All items of chapter -12- Painting,poilishing and varnishing of USOR 2010
-
-
65771.76
All items of chapter -13- Water supply of USOR 2010
-
-
446680.05
All items of chapter -14- Drainage & sewerage of USOR 2010
-
-
162487.98
All items of chapter 15 Sanitary installations of USOR 2010
-
-
880000.71
All items of chapter 16 "Horticulture and Landscaping " of USOR 2010
-
-
225521.97
All items of chapter 17 Misc.building works of USOR 2010
-
-
370473.96
All items of chapter -23- Roads and platform works of USOR 2010
-
-
536620.75
Applying ready mixed Birla / JK or similar make white wall putty or similar make on wall surface including rubbing the surface with all labour & material as a complete job.
800
69
55424
Rebate for dismantling of building work(i.e. brick work / stone work in lime/ cement , RCC, Cement Concrete, slab, flooring, wall, foundation/ platform wall or any type of wall / drain upto the required formation level) 2 as per direction of engineer in charge including all tools, plants, ladders, scaffolding, and other equipment required for dismantling, all lead, lift, ascent, descent, handling, rehandling , safety precaution, crossing of track or any other obstructions and removing the dismantled material out of railway premises ( except the rails which will be the property of railway. )
600
-
-64080
Supplying & fixing deep well type India mark-II, hand pump with all accessories or similar as per IS- 950 -100 mm. dia complete up to 50 M depth with all necessary such as conducting geophysical survey and investigation, yield test with 90 degree V- notch, 150 mm. / 110 mm. dia PVC pipe (6 Kg./Sq cm) 63 mm. dia PVC pipe (6 Kg./Sq cm) PVC ribbed screen 63 mm. nominal dia, 32 mm. dia GI pipe (medium quality) bleaching powder & PVC reducer with hiring of all necessary T&P like tripod, bogy cutter, wire rope, clamps, wooden planks, 3 padding arrangements including cartage, transportation to carry out the boring of hand pump including shrouding with gravel and coarse sand between bore wall & strainers and including extraction of casing pipe after lowering of pipe assembly, cleaning the drilled bore well development of bore hole with pump etc. arranged by the contractor with circular cement concrete 1:5:10 platform 100 mm. thick base of 6 feet dia with 12 mm. dia plastering and drain as per direction of Engineer in charge disinfection of hand pump including curing of concrete for a specified period etc. complete job. (Cement used in platform will be paid under NS item, if the hand pump is not successful at one site, the site is to be changed by the contractor at his own cost for which no extra payment shall be made to him).
12
54435
653223.48
Manufacturing, Supplying and fixing diagonal station name boards 60x60 cm size made of 18 SWG 4 M.S. Sheet with porcelain vitreous enameled surface on both side with name of the station duly embossed lettering in three languages on face of board including clamping arrangement with all labour and material as a complete job.
12
1138
13665.72
Manufacturing, supplying and fixing station name boards of size 2.44 mtr X 0.90 mtr fabricated out of 2SWG black iron sheet welded between the two angle iron size 40x40x5mm on either face of the sheet with three no holes 12 mm dia in each vertical portion of the frame for fixing to the post of size125mm x75 mm will be 5 provided for fixing board with post. The post shall be supplied with the board, with heal of any section welded to bottom of the post, Six nos. MS bolts and nuts 12mmx40mm will be provided for of board with the posts. in three languages as per desired pattern and height/size etc as a complete job including cement concrete work in fixing over platform. The post and frame shall be painted with one coat of primer and three coats of enamel paint of approved quality & shade. Station name board shall be painted with one coat of primer and three coats of golden yellow paint of approved quality on both sides & shade including lettering work.
4
11043
44173.52
Providing and laying in position reinforced cement concrete of M25 grade cast in situ/ Precast reinforced concrete/ Precast Mass cement concrete/Precast prestressed cement concrete for precast fencing of 6 designs as approved by Engineer incharge for platforms, circulating areas, tresspassing locations/built up area locations/level crossings or any other locations as per requirement; precast drain work in yards, Precast kerb stone, Precast Kilometre post & Precast Gradient post as per drawing approved by engineer in-charge and as per approved plan and mix design with coarse sand and stone aggregate of 20mm and down gauge in raft/open foundation, pile cap and all works upto plinth for all heights and depths including compaction of concrete by electrical/mechanical vibrator, providing and using admixture in recommended proportion as per IS 456, IS-9103 & concrete bridge code applicable as per approved mix design with Appropriate cement content, minimum water cement ratio and slump as specified in special conditions produced by RMC plant/automatic computerized/electronic batching plant and placed using concrete pump including designing of concrete mix, finishing the exposed surface of concrete, curing of concrete as required including all lead by transit mixer (crossing of stream, nallahs, railway tracks, level crossings or any other obstruction such as traffic jam etc.), lift, pumping, ascend, descend, loading, unloading, handling, wastages if any, " cost of all safety works and safety precautions with all labour, arrangements for cold weather and hot weather concreting as applicable, taxes and royality etc. as a complete job as per specifications and directions of engineer in charge. Nothing extra will be paid on any account. The rate will also include cost of OPC cement, admixture (plasticizer, super plasticizer, or retarder etc.) as per approved mix design. Note-Reinforcement steel including cutting, straightening, hooking, bending, binding, placing and keeping and maintaining in position including cost of binding wire and shuttering will be arranged by contractor and payment will be made separately under relevant items of USOR-2010). Note:- In case of precast items:- (i). 60% payment will be released before placement work and rest 40 % will be after fixing of precast concrete component at site. "
575
9428
5421203.5
"Providing and laying in position reinforced cement concrete of M25 grade cast in situ as per approved plan and mix design with coarse sand and stone aggregate of 20mm and down gauge in building above plinth for all height including compaction of concrete by electrical/mechanical vibrator, providing and using admixture in recommended proportion as per IS 456, IS-9103 & concrete bridge code applicable as per approved mix design with Appropriate cement content, minimum water cement ratio and slump as specified in special conditions produced by RMC plant/automatic computerized/electronic batching plant and placed using concrete pump including designing of concrete mix, finishing the exposed surface of concrete, curing of concrete as 7 required including all lead by transit mixer (crossing of stream, nallahs, railway tracks, level crossings or any other obstruction such as traffic jam NS-3etc.), lift, pumping, ascend, descend, loading, unloading, handling,wastages if any, cost of all safety works and safety precautions with all labour, arrangements for cold weather and hot weather concreting as applicable, taxes and royality etc. as a complete job as per specifications and directions of engineer in charge. Nothing extra will be paid on any account. The rate will also include cost of OPC cement, admixture (plasticizer, super plasticizer, or retarder etc.) as per approved mix design. Note- Reinforcement steel including cutting, straightening, hooking, bending, binding, placing and keeping and maintaining in position including cost of binding wire and shuttering will be arranged by contractor and payment will be made separately under relevant items of USOR-2010). "
200
9964
1992848
"Providing and laying RCC of Specified grade -M-25 cast in situ as per approved plan and mix design with coarse sand and stone aggregate of 20mm and down gauge for all height and depths in Retaining/Wing/Return walls including compaction of concrete by electrical/mechanical vibrator, providing and using admixture in recommended proportion as per IS 456, IS-9103 & concrete bridge code applicable as per approved mix design with Appropriate cement content, minimum water cement ratio and slump as specified produced by RMC plant/automatic computerized/electronic batching plant and placed using concrete pump including designing of concrete mix, finishing the exposed surface of concrete, curing of concrete as required in 8 IRC-112/IRS-CBC/IS codes as applicable, including all lead by transit mixer (crossing of stream, nallahs, railway tracks, level crossings or any other obstruction such as traffic jam whatsover), lift, pumping, ascend, descend, loading, unloading, handling, wastages if any, cost of all safety works and safety precautions with all labour, arrangements for cold weather and hot weather concreting as applicable, taxes and royality etc.including providing and fixing 75 mm dia AC/PVC pipe for weep holes @ 1.5 mtr centre to centre horizontally and 1.0 mtr c/c vertically etc as a complete job as per specification and as per directions of engineer in charge. Nothing extra will be paid on any account. " The rate will also include cost of OPC cement, admixture (plasticizer, super plasticizer, or retarder etc.) as per approved mix design. Note-Payment of reinforcement steel including cutting, straightening, hooking, bending, binding, placing in position including cost of binding wire and shuttering shall be paid extra under relevant item of USOR-2010).
750
8398
6298687.5
"""Providing and laying CC-M-20 of specified grade cast in situ as per approved plan and mix design with coarse sand and stone aggregate of 40 mm nominal size for all heights and depths in pavements,roads etc. including compaction of concrete by electric/mechanical vibrator, providing and using 9 admixture in recommended proportion as per IS-456, & IS-9103 concrete bridge code applicable as per approved mix design complying with maximum cement content, minimum water cement ratio and slump as specified produced by RMC plant/automatic computerized batching plant and placed using concrete pump including designing of concrete mix,making required slope and camber,providing and filling construction & dummy joints with approved joint filler (conforming to grade B of IS 1834) rounding of the edges making and filling the grooves as per drawing, finishing the exposed surface of concrete including cost of steel form work, curing of concrete as required in IRC-112/IRS-CBC/IS codes as applicable, including all lead by transit mixer (Crossing of stream, nallahs, railway tracks, level crossings or any other obstruction such as traffic jam whatsoever), lift, pumping, ascend, descend, loading, unloading, handling, wastage if any, cost of all safety works and safety precautions with all labour, arrangements for cold weather and hot weather concrete as applicable, taxes and royalty etc. as a complete job as per specification and as per directions of Engineer in Charge. Nothing extra will be paid on any account. The rate will also include cost of OPC cement and admixture (Plasticizer, super plasticizer, or retarder etc) as per approved mix. design. "
25
5802
145056.75
Supplying, providing, tightening of all types of High strength frictional grip (HSFG) bolts, nuts & 10 washers/DTI washers conforming to IS: 4000:1992, IS 3757:1985(reaffirmed 2003), IS 6623:2004 & IS 6649 having property class 8.8/10.9 as decided by Engineer in charge, diameter preferred/non preferred sizes, length as desired/designed with coating consisting of Zinc phosphate as per IS 1367 (Pt-XII) in all type of steel girder Road/Rail.
500
238
119000
Supplying, Laying and fixing PVC conduit pipes of following sizes for electrical wiring conforming to relevant IS specification including earthing with 14 SWG GI wire and provision of junction boxes of appropriate 11 size and requisite no. of ways (Max 4 ways) and also PVC bends including cost of material, binding and positioning and holding the conduit in RCC, cutting chases in brick wall and making good including provision of GI fish wire inside all conduits including all incidental work at all height/depth as per approved drawing or as directed by the Engineer in charge with all labour and material as a complete job. 25 mm dia
200
50
10160
40 mm dia
100
74
7483
Supplying and fixing switch boxes manufactured from 16 SWG MS sheet conforming to relevant IS specification in the walls /RCC including cutting and making good the walls /RCC after fixing the box with 13 arrangement for providing screws of 3mm dia for covers to the following size at all height as per approved drawings or as directed by the Engineer in charge including cost of one coat of red lead primer and two coats of synthetic enamel paint of approved quality and shade with all labour material, tools & plants and machinery as a complete job. 100x100x65 mm
10
205
2056.1
180x100x65 mm
10
99
997.4
300x200x100 mm
10
138
1383.7
375x300x100 mm
10
242
2420.4
"Providing and laying in position reinforced cement concrete of M25 grade Precast for drain covers, manhole covers, flue tops etc including compaction of concrete by electrical/mechanical vibrator, providing and using admixture in recommended proportion as per IS 456, IS-9103 & concrete bridge code applicable as per approved mix design with Appropriate cement content, minimum water cement ratio and slump as specified in special conditions produced by RMC plant/automatic computerized/electronic batching plant and placed using concrete pump including designing of concrete mix, finishing the exposed surface of concrete, curing of concrete 17 as required including all lead by transit mixer (crossing of stream, nallahs, railway tracks, level crossings or any other obstruction such as traffic jam etc.), lift, pumping, ascend, descend, loading, unloading, handling,wastages if any, cost of all safety works and safety precautions with all labour, arrangements for cold weather and hot weather concreting as applicable, taxes and royality etc. as a complete job as per specifications and directions of engineer in charge. Nothing extra will be paid on any account. " "The rate will also include cost of OPC cement, admixture (plasticizer, super plasticizer, or retarder etc.) as per approved mix design. Note- Reinforcement steel including cutting, straightening, hooking, bending, binding, placing and keeping and maintaining in position including cost of binding wire and shuttering will be arranged by contractor and payment will be made separately under relevant items of USOR-2010). "
5
8926
44632.55
Providing and fixing stainless steel (Grade 304) Benches and Railing made of Hollow tubes, 18 channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
350
549
192171
Supplying and fixing of submersible pump KSB or equivelent of 1.5HP etc and boring of 100mm dia bore hole upto 80mtr depth with 3.5mtr PVC stainer as a completet job
1
55154
55154.22
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias ,column and similar locations of required 20 size, approved shade, colour(lakha red, jet black approved by Engineer) and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade with area of slab over 0.50 sqm
5
3480
17401.05
Supply and fixing lifting barrier complete with Winch & all fittings
1
247491
247491.82
Assembling & fixing ARC lever on CI foundation type A as per drawing no sig / w/21/86 including all small fittings .
1
7988
7988.33
Supply and fixing of 2 way trestle as per RDSO drg no. SA/3534/M/Adv with latest amendments .
2
667
1334.76
Supplying & Fixing of CI foundation Type A as per RDSO drg. No. S-3529/M/Adv with latest amendments
1
2631
2631.86
Supplying & Fixing adjustable crank of 12 inch x 8 inch as per RDSO drg No. SA/3416/M/Adv with latest amendments
4
1155
4622.44
Supplying & Fixing adjustable crank of 12 inch x 8 inch as per RDSO drg No. SA/992/M with latest amendments and IRS-10/78
40
7498
299925.6
Supplying & Fixing vertical wheel as per RDSO drg. No. SA-3037/M/Adv and IRS S-10/78
15
647
9708
Supplying & Fixing of two bay horizontal wheel as per RDSO drg No. SA/3041/Adv and IRS-S- 10/78
4
965
3862.72
Supplying & fixing of steel wire rope for D/Wire as per IRS-S-3, tensile strength 125-140 Kg. /sqm
40
106
4268.4
Commissioning of lifting barrier as per NR practice including boom lock arrangement with winch in the cabin with E type lock and preparing wire rope transmission from wingh to lifting barrier using 12 mm wire adjustment screw (where required) etc.
1
16491
16491.18
Supplying & fixing land boundary demarcation pillars (size 1250mm x 175mm x163mm) made with RCC of Mix 1: 1.5 :3 or any other mix as directed by engineer in charge . The RCC pillars will be made by 31 providing 4 nos- 10 mm dia main reinforcement bars and 6mm dia stirrups 2 160 mm c/c distance of shape & size as per standard drawing( NRHQE Plan no. HQ/4/04-88) with duly indented letters/ signs/ arrows/numbers etc. 13 mm deep on all faces of pillars . Back ground of pillars will be white washed with 3 coats and letters/ signs/arrows shall be painted with black paint .
20
524
10494.8
"Metallising girder/girder components such as cross girders, stiffeners, bracing etc. of new steel girder as directed by Engineer with aluminum spray not less than two layers after preparing surface by sand/grit blasting(as per clause 3 of IS 6586 & appendix-A of IS: 5905) as per the provisions laid in Appendix-VII of IRS B1 32 2001 specifications (with latest correction slips) with contractor's own material, tools, plants, labour, loading, unloading, transportation, handling, rehandling required if any, including all lead, lift, descents, crossing of tracks/obstructions etc. complete in all respect and as per direction of Engineer in charge. " Per Track
900
808
727785
Providing temporary steel barricading 2.0m high and making arrangements for diversion during construction period at site for day and night as per requirement and as per standard type drawing . This item will 34 b e payable only once during the entire construction period till the completion of work .The arrangement of barricading and traffic diversion has to be kept continuously . This shall include repositioning or repainting of barricading and provision of suitable reflectors and red lamps in night, the dimensions of barricades as given in the drawing with all labour and material as a complete job . Nothing extra shall be paid for fixing and any other arrangements.
200
72
14546
Supplying and fixing Granite Stone slab 30mm thick of approved quality and shade(Lakha Red, Sadar Ali, Jet Black as approved by Engineer) in walls & flooring, Dado pillar counters & floor laid over average 35 13mm thickness of cement and coarse sand mortar 1:3 ( 1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of slab, slabs to be machine cut on all edges to true shape and approved size including rubbing, polishing, all lead, lift, ascent, descent, crossing of nallahs, stream, track, level crossing or any other obstruction with all labour, material, tools, plants, machinery and equipment etc. as a complete mirror finished job.
10
4994
49946.3
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and 36 manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
5
5280
26400.25
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8 37 mm having water absorption less than 0.5% and conforming to IS: 15622, of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
5
1658
8294.5
Providing and fixing in position of 12 MM thick Fiber cement board conforming to IS:14862 type A 38 category including supplying , transporting, handling , placing and fixing on MS/Aluminium channel/frame with all labour and material as a complete job. Note MS/Aluminium channel/frame shall be paid under relevant USOR- 10 item.
5
1015
5079.35
Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminium 39 sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc all labour and material as a complete job
20
26749
534998.8
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements