Rural Development Department Tender

ITEM No.4: Providing and laying Cast in Mix cement concrete in M-10 of trap/granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork,laying/pumping, compacting, roughening them ifspecial finish is to be provided,finishing if requiredand curing complete, with fully automatic microprocessor based PLC withSCADA enabled reversible Drum Typemixer/concrete Batch mix plant (Panmixer) etc.complete. With natural sand/V.S.I. quality Artificial Sand Spec. No. Bd.E.1 Page No. 287

TEM No.5: Providing and laying in situ/Ready Mix cement concrete M-20 of trap/granite /quartzite/ gneiss metal for R.C.C. work in foundations like graft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Spec. No.: Bd.F.3, Page No.298.& B.7 Page No. 38 S.S.R. 2017-18 I.No. 25.11

ITEM No.6: Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Typen mixer/ concrete Batch mix plant (Pan mixer) etc complete. With natural sand/V.S.I. quality Artificial Sand Spec. No.: Bd.F.5, Page No.300.& B.7 Page No 38 S.S.R. 2017-18 I.No. 25.31

ITEM No.7:Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Spec.No.: Bd.F.6, Page No.300.B.7 Page No. 38 S.S.R. 2017-18 I.No. 25.50S.S.R. I.No. 24.01

ITEM No. 8: Providing and casting in situ cement concrete M-20 of trap/ granite / quartzite/ gneis metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand Spec. No.: Bd.F.6, Page No.300.B.7 Page No. 38 S.S.R. 2017-18 I.No. 25.70

ITEM No. 9: Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. Spec. No.: Bd.G.1, Page No.313 S.S.R. 2017-18 I.No. 27.01

ITEM No. 10: Providing and fixing in position TM FE 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations slabs, beams columns, canopies, staircase, newels chajjas, lintels pardis, copings, fins, arches etc. as pe detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wire or tack welding and supporting as required complete Spec. No.: Bd.F.17, Page No.306 S.S.R. 2017-18 I.No. 26.33

ITEM No. 11: Filling in plinth and floors with approved excavated material in 15cm. to 20cn layers including watering and compacting etc complete. Spec. No.: Bd.A. 10, Page No.262. S.S.R. 2017-18 I.No. 21.36

ITEM No. 12: Filling in plinth and floors wit contractors material/brought from outside an approved by Engineer incharge in layers of 15 c to 20 cm including watering and compaction et Spec. No.: Bd.A.11, Page No.263. S.S.R. 2017-18 I.No. 21.37

ITEM No. 13:Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. Spec. No. : Bd.L.1 Page No. 367 S.S.R. 2017-18 I.No. 32.01

ITEM No. 14: Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete Spec. No. Bd.L.2 Page No. 368 S.S.R. 2017-18 I.No. 32.03

ITEM No. 15: Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete Spec. :Bd.L.4 Page No. 368 S.S.R. 2017-18 I. No. 32.06

ITEM No. 16:Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30 cm x 30 cm or other size laid diagonally /square etc finishing smooth (with extra cement) in any colour as directed and curing etc. complete. With Natural Sand Spec. No. : Bd.M.7 Page No. 38:3 S.S.R. 2017-18 I.No. 33.09

ITEM No.17:Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets includings caffolding and preparing the surface by brushing and brooming down etc. complete. Spec. No. : Bd. P. I Page No. 411 S.S.R. 2017-18 I.No. 36.03 ITEM For Bricks Water absorption, (Set of 5 Bricks) Compressive Strength (Set of 5 Bricks) Efflorescence For Murum Sieve analysis For Steel bar testing Upto 16 mm (set of 3 Bars)

ITEM No.18:Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete Spec. No. : Bd.P.5 Page No. 413 2017-18, I.No. 36.11 S.S.R

ITEM No.19:Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete Spec.No. : Bd.0.8/Page No.406 S.S.R. 2017-18, I.No. 35.15

ITEM No.20 Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front sideand grey stove enamel on back side and border / messages symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refillin transportation, and labour etc complete Spec. No. As directed by Engineer in Charge S.S.R. 2017-18, I.No. 6.96

ITEM No. 21: Charges for testing of material itn vigilance & quality control laboratory etc complete For Crushed Metal and Sand Water absorption, Specific gravity,Impact Value Crushing value Sieve analysis

For Cement Standard Consistancy Fintness, specific Gravity, Setting time (Initial & Final) compressive strength soundness

.For Concrete Compressive strength of C.C. Cube (Set of 3 cubes)

For Crushed Metal and Sand Water absorption, Specific gravity,Impact Value Crushing value

For Crushed Metal and Sand Water absorption, Specific gravity,Impact Value Sieve analysis

For Bricks

For Murum

For Steel Bar Testing(up to 16 mm set of 3 bars)

ITEM No. 22: Royalty Charges for Murum, soil 60 mm/40 mm metal (hand broken) etc.