Rural Development Department Tender

Supplying hard murum/ kankar at the road site, including conveying and stacking complete. S.S.R. 2018-19 Sr.No.102/Item NO. 2.29a

Supplying soft murum at the road site, including conveying and stacking complete. S.S.R. 2018-19 Sr.No.103/Item NO. 2.29b

Spreading 80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge S.S.R. 2018-19 Sr.No.1669/Item NO. 50.58.

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete S.S.R. 2018-19 Sr.No.104/Item NO. 2.30

Compacting the sub grade/gravel/oversize metal (200 mm loose) layers for all width with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. S.S.R. 2018-19 Sr.No.1670/Item NO. 50.59

Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. S.S.R. 2018-19 Sr.No.1672/Item NO. 50.61

Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. S.S.R. 2018-19 Sr.No.170/Item NO. 5.01

Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge. S.S.R. 2018-19 Sr.No.186/Item NO. 5.17

Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 mm.to 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer. (A) Contraction and longitudinal joints (15 mm. deep x 8 mm.wide) S.S.R. 2018-19 Sr.No.187/Item NO. 5.18

Providing and fixing Road junction / Information sign board of size 0.90 m x 0.60 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering Grade. S.S.R. 2018-19 Sr.No.298/Item NO. 6.47

Royalty for Material (As per Royalty Statement)

Test For Sand (Fineness Modulus (Sieve Analysis),Silt & Clay Content)

Test For Sand (Silt Factor)

Test For Cement (Standrd Consistancy Fineness,Specific Gravity,Setting Time,Compressive Strength,Soundness)

Test For Aggregate (Water Absorption,Specific Gravity,Impact/Crushing Value)

Test For Aggregate (Sieve Analysis)

Test For Aggregate (Flakiness Index/ Elongation Index.)

Test For Murum (Sieve Analysis)

Test For Murum (Liquid limit & plastic Limit.)

Test For Concrete (Compressive Strength of C.C. Cube (Set of 3 Cubs))