Rural Development Department Tender

Item No. 2 Providing and laying in situ following grade of C.C. of trap / granite/ quartzite / gneiss metal for foundation and bedding including form work compacting and curing finishing etc. complete PCC M-150

Item No. 3 Providing and laying in situ cement concrete M-15 (1:2:4) of trap / granite/ quartizite / gneiss metal for RCC work in foundation and footing of RCC coloumn, centering formwork etc. complete R.C.C. 1:2:4 (M-150) grade

Item No. 4 Providing and casting in situ following grade of C.C. of trap / granite/ quartizite / gneiss metal of approved quality for R.C.C. works as per detailed drawing and designs or as directed by Engineer-in-charge including normal dewatering, centering form work compaction finishing the formed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary of roughening if special finish is to be provided and curing etc. complete (Excluding M.S. bar reinforcement ) A) R.C.C. M-150 grade Coloumns

B) R.C.C. M-150 Grade Beams

C) R.C.C. M-150 Grade Slabs

Item No. 5 Providing and fixing in position Steel bar reinforcement of various diameters for RCC pile caps, footing foundation coloumn, including bending, binding, hooking, bars supporting etc, complete

Item No. 6 Providing IInd class B.B. masonary with conventional bricks in C.M. of following proportion in super structure including striking out joints, racking out joints, watering and scaffolding etc. complete. In CM 1:5 (As per PWD CSR)

Item No. 7 Providing cement plaster for following thickness with appropriate coat in mortor in following proportions without neeru finish to concrete brick, or stone surface in all position including scaffolding and curing etc. complete 20 mm thick in C.M. 1:4 (Outside)

Item No. 8 Providing and applying colourwash of approved colour and shade on new surface including scaffolding and brooming down including 2 coats of whitewash as base coat etc. complete For two coats For Walls

Item No. 9 Filling in plinth and floors with concrete murum for bedding in 15 to 20 cm thick layers --- etc. complete

Item No. 10 Providing dry / trap / granite/ quartzite / gneiss rubble stone coling in 15 to 20 cm thick layers ---- etc. complete

Item No. 11 Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lift including consolidation, surcharging etc. complete.

Sub Work No. 4 :- Power Supply Arrangement Providing single phase power supply arrangement to RO plant site including service cable, meter panal --- etc. complete

Sub Work No. 6 :- Providing ATM RF ID Card & Water Cans Item No. 2 Water ATM RF ID Cards (as per market rate)

Item No 3 Water cans of 20lit capacity and having capacity to keep water 12 hour cool….etc

Item No. 4 Providing and supplying Inverter with 150Ah tubular battry for power supply of ATM machine and lightining arragement in case of power failure……etc

Sub Work No. 7 :- Providing Submersible Pump Item No. 1 Providing, erecting and giving test of 150 mm dia. Submersible Pump sets conforming to I.S. 8034 & I.S. 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and bronze impeller Motor suitable for working on 415 +/- 10%, 3 Ph, 50 Hz, A.C. supply, cable guard, thrust carbon/ fibre bearing to accept entire hydraulic thrust, waterproof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturer’s design. Antitrust stream lined non-return valve shall be provided with the pump. Suitable suction strainer shall also be provided. 3 core, single/double run copper conductor submersible type flat cable 3 m and 2 pairs of erection clamps shall be provided along with the pump.1.50Bhp submercible pump

Item No. 2 Providing and fixing Cable for Pump

Item No. 3 Providing and laying & Hoisting MDPE Pipe 50 mm --- 8 kg / Cm2

Item No. 5 Providing, erecting C.I.D.F. Sluice valves with jointing to pipe work (including all hardware and packing) water works quality having non-rising spindle with hand wheel and without bypass arrangement, spindle of stainless steel as per requirement excluding C.C. foundation/ structural steel supports. 50mm dia. C.I.D.F. Sluice valve (PN-1.0)

Item No. 6 Providing, erecting C.I.D.F. Reflux valves single door with jointing to pipe work (including all hardware and packing) water works quality with jointing to pipe without bypass arrangement with gunmetal seats excluding c.c. Foundation/ structural steel supports. 50 mm dia. C.I.D.F. Refluxe valve (PN-1.0)

Item No. 7 Providing and supplying CIDF specials etc. complete

Item No. 8 Supplying and erecting galvanized cast iron earth plate 60x60x0.6 cm buried in specifically prepared earth pit 1.5 m below ground level with 30 kg Charcoal and Salt in alternate layers, Necessary length of double G.I. earth wire 8 SWG connected to plate with cadmium plate, G.I. nut bolts 12 mm dia. with bituminous compound and run through 12 mm dia. G.I. pipe 3 m long, remaining portion of G.I. wire from surface of earth to switch gear in PVC pipe upto accessible height duly sealed at both ends by bituminous compound complete to the nearest switch gear with end socket as per direction ------ etc. complete

Item No. 9 Providing and fixing panel board for submersible pump including starter Amp, Volt meter etc complete. As directed by Engineer-in-charge

Sub Work No. 8 :- Providing Chiller Arrangement Item No. 1 Supplying & installing 2.0 Ton Online water chillar unit with 0.5 hp compressor-2.0 tone, 0.5 hp motor, Auto panel control, CNC Fabricated out door, fan, cooling system water cooled running capacitor, Relay & stabilizer 1000 litre capacity insulated water tank for chilled water including labour materials etc completed with all taxes excluding GST charges as per standerd specification with 3 yrs repaid warranty capacity 2 ton as per direction of engineering in charge

Wire Fencing and Gate arragement for protection of R.O unit Item No.1 Providing and erecting 1.8 M high above ground level G.I. barbed wire fencing with 8 rows horizontally and along diagonally supported on mild steel angular posts 50 x 50 x 6 mm of 2.5 M and additional posts on either side at every corner and at 30 M including excavating pit (0.30 x 0.30 x 0.60 M) for foundation concrete, fixing posts in 1:4:8 and fastening the wire etc. with oil painting in 3 coats to angles etc. complete.

Item No.2 Providing and fixing M.S. Gate 2.50 M wide for compound with 40 mm dia. G.I. pipe, approved grill work, RCC M-150 side pillars of 25 cm x 40 cm x 2.5 M height, its foundation, finishing, painting etc complete.