Haryana Police Housing Corporation Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 56,50,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of Intern Hostel 3 Block Stilt And G Plus 7 Floors At Shaheed Hasan Khan Mewati College, Mewat Distt. Nuh
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_HBC_86524_1Tender No
2019/HPHC/JULY-11/ 05Tender Authority
Haryana Police Housing Corporation ViewPurchaser Address
-Website
http://https://hphc.org.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earth filling under floors with surplus soil, excavated from foundation and taken only from outside the building plinth, in 15 cm layers, including ramming watering and consolidating lead upto 30 metres. HSR 6.13(a) (CP @ 370%)
4932
79601
343.4
Centering and shuttering for flat surfaces such as suspended floors, Roofs, landings, chhajjas, shelves etc. inclination not exceeding 25 degree with horizontal. HSR 9.1 (CP @ 400%) 1st Storey
1338
271948
40.65
2nd Storey
1398
312103
44.65
3rd Storey
1311
318900
48.65
4th Storey
1311
345120
52.65
5th Storey
1311
371340
56.65
6th Storey
1311
397560
60.65
7th Storey
1311
423780
64.65
8th Storey
1311
450000
68.65
9th Storey
1362
494746
72.65
10th Storey
489
187409
76.65
Centering and shuttering for faces of walls, partitions, retaining walls, well steining and the like (vertical or battering) including attached pilasters buttresses etc. HSR 9.5 (CP 400%) 1st Storey
834
228724
54.85
2nd Storey
182
53553
58.85
3rd Storey
182
57193
62.85
4th Storey
182
60833
66.85
5th Storey
182
64473
70.85
6th Storey
182
68113
74.85
7th Storey
182
71753
78.85
8th Storey
182
75393
82.85
9th Storey
182
79033
86.85
10th Storey
429
194873
90.85
Centering and shuttering for sides and soffits of beams haunchings, girders, bressumers and lintels. HSR 9.7 (CP @ 400%) 1st Storey
1965
567885
57.8
2nd Storey
1653
510777
61.8
3rd Storey
1581
520149
65.8
4th Storey
1581
551769
69.8
5th Storey
1581
583389
73.8
6th Storey
1581
615009
77.8
7th Storey
1581
646629
81.8
8th Storey
1581
678249
85.8
9th Storey
1662
746238
89.8
10th Storey
276
129444
93.8
Centering and shuttering for staircase with sloping soffits including riser and stringers. HSR 9.8 (CP @ 400%) 1st Storey
81
20614
50.9
2nd Storey
81
22234
54.9
3rd Storey
81
23854
58.9
4th Storey
81
25474
62.9
5th Storey
81
27094
66.9
6th Storey
81
28714
70.9
7th Storey
81
30334
74.9
8th Storey
81
31954
78.9
9th Storey
81
33574
82.9
Centering and shuttering for columns (square or rectangular or polygonal in plan) HSR 9.9 (CP @ 400%) 1st Storey
1617
399803
49.45
2nd Storey
1617
432143
53.45
3rd Storey
1491
428289
57.45
4th Storey
1491
458109
61.45
5th Storey
1491
487929
65.45
6th Storey
1491
517749
69.45
7th Storey
1491
547569
73.45
8th Storey
1491
577389
77.45
9th Storey
1491
607209
81.45
10th Storey
261
111512
85.45
Shuttering for faces of concrete foundations and foundations beams (Vertical or battering). HSR 9.13 (CP @ 400%)
318
48733
30.65
Cement concrete 1:4:8 with stone aggregate 40 mm Nominal size in foundation and plinth. HSR 10.39 (CP @ 450%)
306
678417
403.1
Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work (Lintels etc.) excluding steel reinforcement centering and shuttering, laid in position , complete in all respects. HSR 10.80+10.95(a) (CP @ 450%) 1st Storey
6
23725
718.95
2nd Storey
12
47619
721.5
3rd Storey
12
47787
724.05
4th Storey
12
47955
726.6
5th Storey
12
48123
729.15
6th Storey
12
48292
731.7
7th Storey
12
48460
734.25
8th Storey
12
48628
736.8
9th Storey
12
48797
739.35
10th Storey
12
48965
741.9
Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work in shelves excluding steel reinforcement, but including centering and shuttering, laid in position, complete in all respects. HSR 10.81+10.95(a) (CP : 450%) 2nd Storey
9
51574
1041.9
3rd Storey
9
51935
1049.2
4th Storey
9
52296
1056.5
5th Storey
9
52658
1063.8
6th Storey
9
53019
1071.1
7th Storey
9
53380
1078.4
8th Storey
9
53742
1085.7
9th Storey
9
54103
1093
Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work in Slab excluding steel reinforcement, but including centering and shuttering, laid in position, complete in all respects. HSR 10.82+ 10.95(a) (CP : 450%) 2nd Storey
3
18019
1092.1
3rd Storey
3
18140
1099.4
4th Storey
3
18260
1106.7
5th Storey
3
18381
1114
6th Storey
3
18501
1121.3
7th Storey
3
18621
1128.6
8th Storey
3
18742
1135.9
9th Storey
3
18862
1143.2
Damp proof course 40 mm thick of cement concrete 1:1.5:3 using stone aggregate 20 mm nominal size with 2 coats of bitumen 20/30 penetration, at 1.65 kg per sqm laid hot and sanded. HSR 10.114+10.95(a) (CP @ 450%)
77
16313
38.52
Damp proof course 25 mm thick of cement concrete 1:1.5:3 using stone aggregate 20 mm nominal size with 2 coats of bitumen 20/30 penetration, at 1.65 kg per sqm laid hot and sanded. HSR 10.115 +10.95(a) (CP @ 450%)
6
942
28.57
First class brick work laid in cement sand mortar 1:6 in foundation and plinth. HSR 11.2 (CP @ 600%)
81
223086
393.45
Providing and Laying autoclaved aerated (cellular) concrete light weight blocks (as per IS: 2185, part 3) having density of 550 to 650 kg. m3 and compressive strength of 4.0 N/mm2 masonry in non load bearing wall using more than 100 mm thick AAC blocks complete in all respect (ii) with polymer modified adhesive of reputed make as approved by Engineer-in-Charge in superstructure complete in all respect. HSR 11.105 (CP 0%) 1st Storey
183
755607
4129
2nd Storey
183
766175
4186.75
3rd Storey
183
776743
4244.5
4th Storey
183
787311
4302.25
5th Storey
183
797880
4360
6th Storey
183
808448
4417.75
7th Storey
183
819016
4475.5
8th Storey
183
829584
4533.25
9th Storey
183
840153
4591
10th Storey
150
697312
4648.75
Providing and Laying autoclaved aerated (cellular) concrete light weight blocks (as per IS: 2185, part 3) having density of 550 to 650 kg/m3 and compressive strength of 4.0 N/mm2 masonry in non load bearing walls using 100 mm thick AAC blocks completed in all respect (ii) with polymer modified adhesive of reputed make as approved by Engineer-In-Charge in superstructure complete in all respect. HSR 11.104 (CP 0%) 1st Storey
45
21606
480.15
2nd Storey
1563
760868
486.8
3rd Storey
1563
771262
493.45
4th Storey
1563
781656
500.1
5th Storey
1563
792050
506.75
6th Storey
1563
802444
513.4
7th Storey
1563
812838
520.05
8th Storey
1563
823232
526.7
9th Storey
1563
833626
533.35
10th Storey
171
92340
540
First class brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. HSR 11.9 (CP - 600%) 1st Storey
11
34311
445.6
2nd Storey
11
34946
453.85
3rd Storey
11
35581
462.1
4th Storey
11
36216
470.35
5th Storey
11
36852
478.6
6th Storey
11
37487
486.85
7th Storey
11
38122
495.1
8th Storey
11
38757
503.35
9th Storey
11
39393
511.6
Dressed or moulded one brick cornice laid in cement sand mortar 1:4 including 12 mm thick cement plaster 1:4 or pointing, as required. HSR-11.78 (CP - 600%)
435
21924
7.2
Providing and fixing factory manufacture jali of reinforced cement conceret consist of cement , coarse sand and 10 mm and 8 mm dia for steel outer frame of jali will be 50mm wide and 25mm wide and 25 mm thick with smooth finishing as per design approved i/c fixing in position upto any height with cement sand mortar 1:4 complete in all respect. HSR 11.103 (CP - 0%)
324
210600
650
Top Khurra 0.6 m X 0.6 m for rain water pipe in 25 mm thick cement concrete 1:2:4 over 50 mm thick cement concrete 1:8:16. HSR 13.50 (CP - 240%)
45
1881
12.3
Terracing consisitng of 19mm thick heat resident titles for roof insulation 300X300mm laid on 20mm thick 1:3 cement corse sand motor including grouting with neat white cement over avaerage 75mm thick screed of 1:8:16 including two coats of bituman laid hot at 1.65kg per sqrmt on top of RCC slab & clearing of top surface HSR 13.97 (CP 0%) 11st story
1410
1552410
1101
12th story
237
262596
1108
Cement concrete 1:1.5:3 gola 10 cm x 10 cm quadrant along junction of roof with parapet wall finished smooth, where specially specified. HSR 13.64 (CP - 240%)
636
13039
6.03
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99% Light Reflectance ?85% Thermal Conductivity K=0.052-0.057 w/m K, Fire Performance as per (BS 476pt -6 & 7 )in true horizontal level suspeneded on interlocking T-Grid of hot depped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15X32 mm of length 3000mm cross T of size 15X32mm of length 600mm to form grid module of size 600X600mm suspended from ceiling using galvanized mild steel item (galvanized @80gsm) 50mm long 8mm outer diameter M-6 dash fastners 6mm diameter fully threaded hanger rod up to 1000mm length and L-shape level adjuster of size 85X25X2mm spaced at 1200 centre to centre along main T. The system should rest on periphery wallls/ partitons with the help of GI perimetere wall anglke of size 24X24X3000mm made of 0.40mm thick sheet to be fixed to the wall with help of plastic rawl plug at 450mm centre to centre & 40mm long dry wall S.S screws. The exposed bottom portion of all T-section used in false ceiling support system shall be pre-painted with polyster backed paint for all heights. The work shall be carried out as per specifications drawings and as per directions of the Engineer-In-Charge. With or without groves HSR13.92(CP 10%)
1110
854700
700
Screed of 40 mm thick cement concrete 1:8:16 to be laid below the topping. HSR 14.4 (CP : 400%) 2nd storey
1326
103759
15.65
3rd storey
1326
105748
15.95
4th storey
1326
107737
16.25
5th storey
1326
109726
16.55
6th storey
1326
111715
16.85
7th storey
1326
113704
17.15
8th storey
1326
115693
17.45
9th storey
1326
117682
17.75
Conglomerate floor 25 mm thick cement concrete topping 1:2:4. HSR 14.8 (CP : 400%) 2nd storey
1326
150501
22.7
3rd storey
1326
152490
23
4th storey
1326
154479
23.3
5th storey
1326
156468
23.6
6th storey
1326
158457
23.9
7th storey
1326
160446
24.2
8th storey
1326
162435
24.5
9th storey
1326
164424
24.8
Kotah stone flooring 25 mm thick in any pattern as specified over 20 mm thick base of cement coarse sand mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing.(HSR14.62)(CP250%) 1st storey
120.09
84882
201.95
2nd storey
120.09
85008
202.25
3rd storey
120.09
85134
202.55
4th storey
120.09
85260
202.85
5th storey
120.09
85386
203.15
6th storey
120.09
85513
203.45
7th storey
120.09
85639
203.75
8th storey
120.09
85765
204.05
9th storey
120.09
85891
204.35
Extra for nosing in treads of steps of Kotah Stone slab. HSR.14.65. CP.200%(Labour rate)
1930.23
35323
6.1
Kota stone 20 mm thick in skirting risers of steps, dados and wall facing (lining) and pillars laid on 12 mm thick cement coarse sand plaster 1:3 laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing including labour for fixing cramps, dowels and pins etc. (HSR 14.66) (CP 250%) 1st storey
20.34
16872
237
2nd storey
20.34
16893
237.3
3rd storey
20.34
16914
237.6
4th storey
20.34
16936
237.9
5th storey
20.34
16957
238.2
6th storey
20.34
16978
238.5
7th storey
20.34
17000
238.8
8th storey
20.34
17021
239.1
9th storey
20.34
17042
239.4
Providing and fixing vitrified tiles of size 600x600mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement concrete coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. (Double Charged). HSR 14.89 (CP : -15%)
5445
4277891
924.3
Providing and fixing Vitrified tiles of size 600x600mm of approved make in skirting / dado laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. (Double Charged). HSR 14.90 (CP : -15%)
660
521617
929.8
Providing & fixing ceramic tiles / anti skid tiles of size 400 x 400mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. (Digital) HSR 14.91 (CP : -15%)
4152
2202220
624
Providing & fixing Ist quality ceramic glazed wall tiles confirming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades, except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. Size 300x450mm (Digital) HSR 14.92(b) (CP : 0%)
9501
6158073
648.15
12 mm thick cement plaster 1:4 on walls. HSR 15.5 (CP : 500%)
11142
849020
12.7
15 mm thick cement plaster 1:4 on the rough side of single or half brick wall. HSR 15.10 (CP : 500%)
6570
616923
15.65
Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. HSR 16.1 (CP : 230%)
10344
157021
4.6
Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping etc. - Ist quality. HSR 16.2 (CP : 230%)
10344
128007
3.75
Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. - Ist quality. HSR 16.3 (CP : 230%)
10344
320870
9.4
Distempering with washable oil bound distemper (of approved manufacture) two coats on new work. - Ist quality HSR 16.58 (CP : 230%)
38271
1149278
9.1
Providing two coats of exterior acrylic emulsion paint. - Ist quality. HSR 16.79(b) (CP : 0%)
10398
506902
48.75
Providing and applying two coats of white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. HSR 16.81 (CP : 230%)
38271
1433440
11.35
Factory manufacture solid flush door and Shutters, with block board core as per I.S. No. 1659-1969 bonded with water poof type phenol formal dehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in position including iron hinges, screws, chocks/cleats and stops etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position). HSR 17.93-17.18 Note (ii) (CP : 165%) 25 mm
1572
1612789
387.15
35 mm
2865
3311359
436.15
Providing and fixing laminated sheets thickness not less than 1.5 mm (conforming I.S specifications), including cost of approved adhesive complete. - Natural finish, HSR 17.88 (a) (CP : 300%)
4437
5508979
310.4
Providing and fixing Aluminium work for doors,windods,ventilators and partitins with extruded built up standard tubular sections/appropiate Z sections and other sections of approved make conforming to IS;733 and IS;1285 fixed with raw plugs and screws or withfixing clips or wiht expansion hold fasteners including necessary filling up of gaps at junctions at top, bottom and sidea wiht required neopene felt etc aluminium sections shall be smooth ,rust free staright mitered and jointed mechanically wharever required including clean angle, Aluminium snap beading for glazing/paneling C.P brass/stainless steel screws,all complete. Fixed portion(Anodlized Aluminium transparent or dyed to required shade according to IS;1868,minimum anodic coating of grade AC 15). HSR 17.95 + Note (i) (CP : 15%) (Powder coated 50 micron).
4072.5
1134781
242.3
P/F Aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS;733 and IS;1285 fixed with raw plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions at top, bottom and side with required neoprene felt etc aluminium sections shall be smooth ,rust free straight mitered and jointed mechanically wherever required including clean angle, Aluminium snap beading for glazing / paneling C.P brass / stainless steel screws, all complete. Shutters of doors, windows & ventilators including providing and fixing of hinges/pivot and making provision for fixing of fitting wherever required include the cost of PVC/neoprene gasket required including Aluminimum fitting. HSR 17.96 + Note (i) (CP : 15%) (Powder coated 50 micron).
17946
5545403
268.7
Providing and fixing glazing in aluminimum doors, windows, ventilator shutter and partitions etc with PVC/Neoprene gasket etc complete (cost of aluminium snap beading shall be paid in basic items) HSR 17.98 (i) & (ii) (CP : 15%) With float glass panes of 4.00 mm thickness
195
136568
609
With float glass panes of 5.00 mm thickness
2010
1618050
700
Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, grating frames, window guards, iron doors open able or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. HSR 18.12 (CP : 500%)
14
87389
1040.35
Stair case railing of 40mm internal dia G.I pipe class "B" as per I.S No. 1239 as hand rail using flats and square bars as supporting members and base plate welded as per design specified including cutting , welding rods and complete fixed in position. HSR 18.13 (CP : 500%)
28
194376
1157
Fe 500 EQR steel bars for R.C.C. works, where not included in the complete rate of R.C.C including bending, binding and placing in position complete. HSR 18.22 (CP : 500%)
10811.55
60137084
927.05
Pressed steel sheet frames (chowkhats), consisting of 2mm thick steel sheet of the specified section, including iron lugs ( hold fasts), iron hinges , confirming to P.W.D. specifications, including bolts for fixing stops, lock notch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1;3:6 for filling in the frame, and cement conc. for lugs complete. HSR 18.34 (CP : 500%) a) Door and window frame of size 89 mm x 50 mm with 40 mm wide single rebate
5988
2570648
71.55
c) Door and window frame size 127mm X 50mm with 40mm wide double rebate
7296
3361996
76.8
Preparation of sub grade, including trenching, rough dressing of spoil final dressing of earth, to given levels and camber, watering, rolling with road roller, and compacting the bed. HSR 24.1 (CP : 500%)
2910
16141
92.45
Total Civil (HSR)
-
-
-
HSR - P.H. (CIVIL)
-
-
-
Excavation for pipelines running under pressure in trenches and pits, in open areas, where disposal of surplus earth is done along with the alignment including trimming & dressing sides, levelling of beds of trenches to correct grade, cutting joints holes, cutting trees and bushes, etc., refilling consolidation and watering of refill in 15 cm layers and restoration of unmetalled or unpaved surface to its original condition, including the cost of dewatering of rain water, diversion of traffic, night signals, fixing caution boards, watching, fencing etc., and outside the town in ordinary soil : HSR 6.8 (CP : 370%)
405
19606
1030
Excavation of trenches in streets, lanes or in Open areas for storm sewer, sewers running by Gravity and manholes to full depths as shown In drawings including shoring timbering of Poling boards, frame System type, dressing to correct Sections and dimensions, according to templates and levels, Dewatering, provision for diversion of traffic, cutting trees and Bushes etc. Night signals, profiles, pegs, sight rails, boning rods, Crossing over trenches for access to the houses, watching fencing, Etc., fixing and maintenance of caution boards, refilling of trenches, Watering of refill, in 15 m layers, ramming and restoration of Unmetalled or unpaved surface to original condition and removal Of surplus soil from site of work, upto a lead of 1 Km in ordinary soil., HSR 6.10(a) (C.P.@ 370%) - For depth not exceeding 3 Mtr depth.
1131
63203
1189
Cement concrete 1:4:8 with stone ballast 40 mm nominal size in foundation and plinth. HSR 10.39 (CP : 450%)
369
818091
403.1
Cement concrete 1:2:4 with stone ballast 20 mm nominal size in s/s. HSR 10.59 (CP : 450%)
33
112865
621.85
Providing & Fixing PVC Rain water pipe 6 kg pressure of ISI mark in cement mortar during masonry work. - 150 mm dia. HSR 13.89 (b) (CP - 20%)
2238
904107
336.65
Providing & fixing PVC Bend ISI mark. - 150 mm dia. HSR 13.90 (b) (CP - 20%)
156
30962
165.4
Cutting Holes upto 23 cm square through Stone Masonry or Brick work in cement walls for Pipes and making good including repointing, replastering and finishing according to existing finish where required. HSR 28.24 (CP : 300%) a) 11.43 cm thickness of the walls
264
14784
14
b) 22.86 cm thickness of the walls
882
71794
20.35
Constructing Brick Masonry Inspection Chamber Size as given below upto 0.60 Metre average depth in Cement Mortar 1:5 Lime Concrete with 40 percent lime mortar 2:3 in foundation Cement mortar 1:2:4 Benching 12 mm thick Cement Plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C 1:2:4 slab 100 mm thick CC topping 50 mm thick with 455 mm x 455 mm x 610 mm inside Light Duty C.I. Inspection Chamber Cover and Frame Weight as per I.S.I. Specification painted with 3 Coats of black bitumastic superior paint complete as per standard design. HSR 29.84 (CP @ 450%) c) 600x900
99
288301
529.48
Extra Heavy Duty Set (HD-20) 560 mm Clear opening. HSR 29.94 (CP @ 5%)
99
114345
1100
Providing Salt Glazed Stone Ware Pipe WS Grade 'A; in Sstandard length of 600 mm each pipe marked with IS: 651 and their Lowering, Cutting, Jointing and Testing as described in HSR Item. 29.38, 29.39, 29.40 including the cost of jointing materials as well a carriage, loading ,unloading , stacking, handling, re-handling etc, complete in all respects to the satisfaction of Engineer-in-charge. HSR 29.95 (iv) (CP : 5%) b) 150mm dia
99
20686
199
P/F in position Indian make (Ordinary) Lavatory Suites Consisting of Lavatory in VITREOUS CHINAWARE size as given Below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary; R.S or C.I BRACKETS for building into wall including Painting; 32 mm C.P BRASS WASTER WITH C.P brass chain and rubber plug; 15 mm C.P BRASS SCREW DOWN PILLAR TAP WITH Jam nuts or couplings best design ( as approved by the Engineer- In-charge) ALL FITTINGS BEST INDIAN MAKE and; to the approval of the Engineer-in-charge, ALL brass work chromium plated and COMPLETE in all respects INCLUDING cutting and making good the walls floors and painting of fittings. - White - iv) Size 550 mm x 400 mm with one no. tap, HSR 30.41 iv (CP @ 340%)
267
478143
407
Providing and Fixing in position best Indian make Pedestal fittings of vitreous chinaware complete. HSR 30.44 (CP : 340%)
267
327769
279
Providing and Fixing in Position Best Indian Make Chromium Plated Brass 2nd Tap Lavatory Suit. HSR 30.45 (CP : 340%)
267
108081
92
Providing and fixing in position Best Indian Make Bevelled Edge 5.5 mm thick Mirror Mounted on Asbestos Sheet Ground fixed in position by means of 4 Nos. Chromium Plated Brass Screws and washers over rubber washers and rawl plug embedded in the wall or chromium plated brass clamps with C.P brass screws (as required by the Engineer-in-charge) complete including cutting and making good the walls etc. a) Indian Make, (ii) 600 x 450mm HSR 30.71a(i) (CP @ 340%)
267
125703
107
Providing and fixing Lead Inlet Conection with Brass Union for Flushing and Warning Pipes Complete in all respect c) 15 mm alkalene pipe inlet connection. HSR 30.93c (CP @ 300%)
1326
55692
10.5
Cutting chase in brick walls in cement or in floor for embedding G.I or fixing skirting and making good the same to its original condition. - size 75mm x 50 mm, HSR 30.95c (CP @ 340%)
2928
51532
4
Providing and fixing in position Best Indian Make Shower with 15 or 20 inter dia Inlet. (d) C.P brass with revolving joint. HSR 30.66 (CP : 340%)
264
141715
122
Providing and fixing in position Best Indian Make Towel Rails fixed in with rawl plugs embedded in walls with C.P. brass screws, Complete in all respect including cutting and making good the walls etc. - 25 mm dia C.P. Brass Adjustable 600 mm long. HSR 30.66 (CP : 340%)
267
71662
61
Providing and fixing in position M.S. or heavy flat iron clamps made out of M.S. flat not less than 5 mm of the approved design for fixing C.I. soil waste vent or anti pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting. HSR 30.88 (CP 350%) For 100 mm internal diameter pipes
594
33412
12.5
For 100 mm internal diameter pipes
1782
88209
11
P/F in position Gully Traps fixed in Cement Concrete 1:4:8 complete with H.C.I Grating 150 mm x 150 mm Cast Iron cover weighing approximately 7.26 kg and Frame clear opening 300 mm x 300 mm and outside size 330 mm x 330 mm and Chamber including cost of all Brick work in Cement Mortar 1:5 Cement Concrete 1:8:16 in foundations and Cement Concrete 1:2:4 in Coping around C.I. cover and frame etc. with three coats of black bitumastic superior Paint of approved manufacture on all C.I. work as per standard design, minimum depth of water should be 150 mm with a minimum seal 50 mm. - 100 mm internal diameter SW gully trap. HSR 30.114 (C.P.@ 340%)
132
96412
166
P/F HDPE water storage tank of Sintex, Diplast, O.K., Supreme make with cover / lids marked with ISI 12701 on roof top of building i/c cost of hoisting and placing in position, making connections with inlet and outlet pipe, providing overflow and scour provision with suitable plug on scour pipe i/c cost of nipples, washers, flanges for connection in tank, complete in all respect. HSR 30.119 (CP : 0%) - 500 Ltr.
267
716094
2682
Total P.H. (HSR) CIVIL
-
-
-
E.I. (HSR) PART
-
-
-
Supply and erection of miniature circuit breaker/ isolator 240/415 V in the existing distribution board including making necessary connection:- (HSR 31.17-a) (CP 30%) Miniature Circuit Breakers of 9 K.A. breaking capacity ii) SP MCB 6 amp. To 32 amp.
2976
367536
95
ii) SPN MCB of 9 KA breaking capacity 40 amp. to 63 amp.
297
92664
240
Supply and erection of Fittings and Accessories. (HSR 31.18) (CP 200%) xi) Bakilite angle/straight button holder large size.
528
9820
6.2
xxvi) S/E of hexagonal M.S box 1.60 mm thick having each side 8 cms 7.5 cms deep top covered with M.S lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable Suspension hook and erected in R.C.C slab for erection of fan, the bottom covered with 3 mm thick bakelite sheet with suitable holes, Painting etc. complete with all labour and material required to complete the job.
792
62488
26.3
S/E of pipe for wiring purpose i/c bends inspection boxes etc., where necessary and painting as required. (HSR 31.21) (CP 350%) xxx)S/E of PVC pipe of 6 kg pressure, laid 1 mtr. Below ground level complete i/c digging & reffling of trench with jointing extra (a) PVC pipe 120 mm dia.
300
79650
59
(b) PVC pipe 80 mm dia.
150
28350
42
Earthing (HSR 31.22) (CP 350%) iii).Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired. .
18
36693
453
v) Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.
18
15066
186
(xv) Pdg. And fixing 25mm x 5mm GI strip on surface on in recess for connection etc. as required with all labour and material.
1320
120582
20.3
xvi) Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required .
600
9180
3.4
Galvanised Iron (HSR 31.24) (CP -350%) (ii) Excavation earth pit 180cm round at top and 90cm at bottom 4.5m deep and refilling the same in plains including supply of necessary charcoal / coke and salt mixture.
12
13716
254
(iv) Supply and erection of 60cm x 60cm x 6mm thick galvanised iron plate including necessary bolts and nuts to GI tape.
12
11610
215
(v) Providing standard watering tank incluidng down pipe and CI cover with locking arrangement etc.
12
10260
190
(vi) Supply and erection of 20mm x 3mm thick lightening conductor GI tape fixed with suitable GI stapples of same size.
1500
95175
14.1
(vii) Supply and erection of GI tape 32mm x 6mm thick from earth electrode directly in ground and surface fixed with GI stapples of same size.
730
107091
32.6
(viii) Supply and rection of 25mm diameter 1.5m long lightening GI tube rod tapered into a point at the top with 16cm x 16cm x 3mm thick GI base plate and necessary nuts and bolts with washers.
42
20412
108
(ix) Providing and fixing testing joints made of 20mmx3mm thick GI strips 12.5mm long with 4Nos. bolts and nuts with wahsers complete.
12
361
6.7
Supply and erection of under ground cable loose in existing pipe or trenches complete with necessary connections.(HSR 31.26) (CP 140%) xxix) 95 sq mm, 3.50 Core cable (Armd)
2100
609840
121
Supply and erection of suitable compression type brass cable glands for underground Cable. .(HSR 31.28) (CP 140%) iv) 70 sq mm, 9.50 Core cable (Armd)
36
1944
22.5
Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer-in-charge of the work. (HSR 31.35-xi-i) (CP 130%) g) 95 sq mm.
144
1854
5.6
Supply and erection of PVC unsheathed copper conductor cable single core 1100V grade in pipe of suitable size excluding cost and erection of pipe. (HSR 31.40) (CP 10%) i) size 1.5 Sqm
11880
133293
10.2
iii) size 4.0 Sqm
19800
533610
24.5
iv) size 6.0 Sqm
19800
775368
35.6
(v) Size 10.0 Sq mm
120
6600
50
(vii) Size 25.0 Sq mm
1080
160023
134.7
Supply and rection of double door sheet enclosure distribution board suitable for MCB and ELCB etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in charge of the work. (HSR 31.41) (CP 10%) (ii) 8-way , SP&N ( Horizontal)
3
2871
870
(iii) 12-way , SP&N ( Horizontal)
294
358974
1110
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary conneciton, complete in all respect. (HSR 31.56) (CP 0%) (vii) Fan regulator
792
314424
397
i) 20 amp switch
264
30624
116
(viii) Call bell Ding-Dong (Monica)
264
26136
99
(ix) Blanking Plate
1695
42375
25
Providing and fixing GI concealed sheet metal boxes with inner and outer faceplate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respect. (HSR 31.57) (CP 0%) i) 1 & 2 Modules
264
26664
101
iii) 4 Modules
264
39072
148
Supply and erection of Hot water pipe medium class (B-class) GI as per IS 1239 with 25mm thick insulation of 48 kg. /Cum density and K value +0.03 W/MK R value+1.67 sqm. C/W to withstand and temp. of 250 deg., erected in wall or surface including all labour and material required to complete the job in all respect. (HSR 30.120) (C.P. 0%) (b) 20 mm internal diameter of pipe line.
180
54360
302
(d) 32 mm internal diameter of pipe line.
450
203850
453
S/E of Taps of made of Gun metal ISI marked including all labour and material required to complete the job.(HSR 30.121)(CP 0%) (b) 20 mm diameter
528
147840
280
Supplying, Installation, Testing and Commissioning of solar water heating system with copper Absorber made of copper sheet 34 gauge /copper tube (at least 10Nos. ) 12.7 mm dia 0.56 mm thick rider and 2 no's headers of copper tube dia 0.56 mm thickness, 0.71 mm with flat plate collector Length 1860mm. width 1240 mm and height 100mm. The collector box shall x25mm and 1.6 mm thick. all water carriage system should with stand 4.5 kg cm sq. pressure complete duly insulated from back and front with glazing and stainless steel storage tank (insulated) with temperature gauge, strainer, watermeter 2 Nos. and HDPE/LDPE cold water tank duly erected on existing MS angle/ channel stand with suitable electric backup its control and writing etc. duly erected on roof top including all labour and material required to complete the job in all respect. (HSR 30.123) (CP 0%0 (VIII) 5000 LPD Capacity
3
2475000
825000
E.I. HSR Amount
-
-
-
Fire Fighting System(HSR)
-
-
-
HSR(28.10(A)(CP10%) Providing and Fixing CAST IRON DOUBLE FLANGED SWING CHECK TYPE REFLUX(NON-RETURN) VALVES PN-1.6 MARKED WITH IS:5312 including nuts and bolts marked with IS:1363, Rubber sheet marked with IS:638 etc. carriage loading, unloading,stacking handling , RE-handling etc. Complete in all respects to the satisfaction of Engineer-in-charge.(Makes AARKO, VENUS, LEADER, BIR, PANJA,UPADHAY) i) 100MM i/d
3
11094
3362
Earthing (HSR 31.22) (CP 350% ) xvi) Providing and fixing 4.00 mm dia G.I wire on surface or in recess for loop earthing as required.
105
1606
3.4
xv) S/E of GI tape 25mm x 5mm thick on surface or recess for connection etc as required with all labour and material..
105
9591
20.3
S/E of under ground cable loose in existing pipe or trenches with necessary connections (Armoured). (HSR 31.26) (CP 140%) xxxxi) 25Sq.mm, 4 core armoured cable.
105
14187
56.3
Total FIRE FIGHTING SYSTEM HSR Amount
-
-
-
DSR - Civil
-
-
-
Providing and laying ready mix concrete M-10 grade concrete for RCC in fully automic batching palnt and transported to site of work in transit mixer including pumping of RMC from transit mixer to sit eof laying excluding the cost of centring and shutting, finishing the reinforcement including cost of admixtures in recommended proportions as per IS 9103 to accelerate/retard setting of concrete improve workability with imparing strength and durability as per direction of Engineer in charge with 220 Kg of cement NS
234
1075230
4595
Providing and laying ready mix concrete M-25 grade concrete for RCC in automatic batching plant and transported to site of work in transit including pumpng of RMC from transit mixer to site of laying excludit admixtures in recommended proportions as per IS 9103 to accelerate setting of concrete improve workability with impairing strength and durability as per direction of Engineer in charge with 340kg of cement NS
7002
41164758
5879
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type DSR 2016 / 9.114.1
2112
60086
28.45
Providing & Laying 12mm average thick gypsum plaster DSR 2016 / 13.78
38271
8318201
217.35
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. DSR 2016 / 9.96 9.96.1 300x16 mm
570
121096
212.45
9.96.2 250x16 mm
1851
350209
189.2
Providing and fixing aluminium tower bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868), Transparent or Dyed to required colour or shade , with nuts and screws etc. complete in all respect. (Powder Coated) DSR 2016 / 9.97 9.97.3 200x10 mm
2463
187557
76.15
9.97.4 150x10 mm
4608
296294
64.3
9.97.5 100x10 mm
2229
109666
49.2
Providing and fixing aluminium handles, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868), Transparent or Dyed to required colour or shade ,with nuts and screws etc. complete in all respect. (Powder coated) DSR 2016 / 9.100 9.100.1 125 mm
4926
251718
51.1
9.100.2 100 mm
2229
100527
45.1
Providing and fixing aluminium hanging floor door stopper, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868), Transparent or Dyed to required colour or shade ,with screws etc. complete in all respect. - Twin rubber stopper (DSR 2016 / 9.101.2 )
2397
91086
38
Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete. - 255 X 19 mm DSR 2016 / 21.11.2
2229
600826
269.55
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. a) 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. DSR 2016 / 16.91.1
1080
816642
756.15
Providing and larying granite stone of superior quality not less than 17mm laid over 12mm thick cement mortar 1:3 and jointed with neat cement mixed with pigment to match the shade complete in all respect to the satisfaction of Engineer in Charge
2234.73
6650556
2976
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. DSR 2016 / 4.12
615
29489
47.95
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm). DSR 2016 / 13.44.1
6477
380847
58.8
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). DSR 2016 / 10.28
10500
4960725
472.45
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. DSR 2016 / 22.5
1347
401810
298.3
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. a) Size of Tile 600x600 mm DSR 2016 / 11.48.2
4070
679893
167.05
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge. DSR 2016 / 16.79
180
383805
2132.25
TOTAL DSR (CIVIL )
-
-
-
DSR - P.H.
-
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single Tee with door - 110x110x110 mm DSR 2016 / 12.42.3.2
309
56098
181.55
Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. - 110 mm, DSR 2016 / 12.43.2
1242
225298
181.4
Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. DSR 2016 / 12.46
309
56052
181.4
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall DSR 2018 / 16.7 DSR 18.7.1 - 15 mm nominal outer dia Pipes
396
56608
142.95
DSR 18.7.2 - 20 mm nominal outer dia Pipes
1188
213780
179.95
DSR 18.7.3 - 25 mm nominal outer dia Pipes
594
128422
216.2
DSR 18.7.4 - 32 mm nominal outer dia Pipes
726
209814
289
DSR 18.7.5 - 40 mm nominal outer dia Pipes
1155
333852
289.05
DSR 18.7.6 - 50 mm nominal outer dia Pipes
404
221614
548.55
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. DSR 2016 / 18.8 DSR 18.8.1 - 15 mm nominal outer dia Pipes
4776
1175851
246.2
DSR 18.8.2 - 20 mm nominal outer dia Pipes
795
226455
284.85
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - DSR 2016 / 18.9 DSR 18.9.5 - 40 mm nominal outer dia Pipes
180
57807
321.15
DSR 18.9.6 - 50 mm nominal outer dia Pipes
300
145275
484.25
Providing and Fixing white vitreous china extended wall mounting water closet of size 780*370*690 mm of approved shape including providing & fixing white china cistern with dual flush fitting, of flushing capacity 3ltr/6ltr. Including seat cover and cistern fittings , nuts , bolts and gasket complete DSR 2016 / 17.78
267
2586081
9685.7
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board - 510x1040 mm bowl depth 200 mm DSR 2016/ 17.10.1.3
264
995900
3772.35
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : DSR 2016 / 18.17 DSR 18.17.1A 20 mm nominal bore
531
210568
396.55
DSR 18.17.1 25 mm nominal bore
60
25680
428
DSR 18.17.3 40 mm nominal bore
48
28065
584.7
DSR 18.17.4 50 mm nominal bore
24
17997
749.9
Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length - 15 mm nominal bore, DSR 2016 / 18.21.2.1
1854
125701
67.8
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : DSR 2016 / 19.6.1 - 100 mm diameter
66
21486
325.55
DSR 2016 / 19.6.2 - 150 mm diameter
83
29606
356.7
DSR 2016 / 19.6.3 - 250 mm diameter
390
187999
482.05
DSR 2016 / 19.6.4 - 300 mm diameter
426
220902
518.55
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round RCC pipes including bed concrete as per standard design : DSR 2016/ 19.2.1 - 100 mm diameter
66
41114
622.95
DSR 2018 / 19.2.2 - 150 mm diameter
83
63233
761.85
DSR 2018 / 19.2.4 - 250 mm diameter
390
400530
1027
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design: - 300 mm diameter DSR 2016 / 19.3.5
426
322482
757
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :
48
416820
8683.75
a) 0.91 m deep with SFRC cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. i) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 - DSR 2016 / 19.9.1.1 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : i) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 - DSR 2016 / 19.27.1
60
242586
4043.1
Total DSR - PH
-
-
-
DSR PART (16.11) FIRE FIGHTING
-
-
-
Supplying , fixing , testing and commissioning of BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. i) 100 mm dia (DSR item no. 16.11.1.4)
6
24720
4120
FIRE DETECTION AND ALARM SYSTEM(CONVENTIONAL) DSR ( 17.1) supply, installation,testing & Commisioning of manual call boxes of M.S.Construvtionall point in surface/ Recess with stainless steel chain & hammer assembely complete with glass & push button etc. as required. (Make : Cooper / Hochiki / National / Safeway) ( DSR 17.1.3)
54
24948
462
supply, installation,testing & Commisioning fire alarm sounder with facility to make annoucement , mounted in ABS Box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.(Make : Cooper / Hochiki / National / Safeway) ( DSR 17.1.7)
54
25812
478
S/laying of 2x1.5 sqmm fire alarm armoured cable , 600/1000 v rated with annealed copper conductor having XLPE insulation , steel wire armouring & FRLS outer sheath complete as required.( DSR 17.5.2)
1500
211500
141
Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 6 zone panel for fire alarm system 100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required- 2 Nos.(one to act as standby) (DSR 17.1.11)
3
143196
47732
Providing and Placing on Terrace ( at all floor levels) polyethlene water storage tank ,IS:12701 marked , with cover and suitable locking arrangement and Making necessary holes for inlet, outlet and overflow pipes but without fitting and the base support tank. Circular/ Rectangular Tank ( DSR18.48)
75000
543750
7.25
TOTAL FIRE FIGHTING (DSR) AMOUNT
-
-
-
NS - CIVIL
-
-
-
Providing and injecting chemical emulsion for anti termite with using Lamidaclopid @ 0.075 concentration PCI solution.
2175
239250
110
Providing & fixing 25mm thick red sand stone finished both sides for cupboard shelves and partitions including slightly round edge, complete in all respect as per direction of Engineer-in-charge.
792
597168
754
Applying priming coat with exterior primer before providing weather shield exterior paint in all shade on newly plastered or conc. Exterior surface.
10398
267229
25.7
Providing & fixing S.S. 20mm dia. hanging rod heavy quality i/c wall to wall clamps of S.S complete in all respect as per direction of Engineer-in-charge.
264
71808
272
P&F MS tie rod 8mm fully threaded with nut bolt & washer inserted in all aluminum doors completed in all respect.
33
4488
136
P/F door closer 1938( Hydraulic door closer) complete in all respect GODREJ MAKE
264
588192
2228
Providing & fixing stainless steel jali 22G & 304 Grade in aluminium wire gauze shutter of window and door etc. complete in respect.
2238
1790400
800
Extra providing opening of required size and shape for wash basin / kitchen sink in kitchen platform, vanity counter and similar location in marble /granite stone work i/c necessary holes for pillar taps etc i/c moduling rubbing and polished of cut edges etc. complete in all respect
264
92611
350.8
Earth filling with earth brought from outside the campus including laying in 25 cm layers, compaction, rolling, watering and levelling complete in all respect.
1500
264000
176
Providing and fixing mumty door consisting of mild steel angle iron frame 35x25x5mm thick, cross braces 20x 5mm @ 4nos. at each side) and 2 Nos. MS flat 50x6mm and covered with MS sheet 16 gauge including locking arrangement (with sliding bolts & T- bolt
3342
248478
74.35
Finishing and laid Cement concrete with vacuum dewatering system surface and fine trowel complete in all respect.
708
43719
61.75
Cutting groove in cement conc. Work in Road / Taxi track of size 4mmx50mm
1770
49560
28
Providing and Fixing Chicken Mesh Jali (app. 2.0 kg per 200 sft ) with nail and washer on wall, columns and beams etc before applying plaster to avoid cracks at junction and intermediate of wall complete in all respect
2433
102186
42
Making and cutting and hole 100mm to 125mm dia in RCC through core cuter machine complete in all respect
1848
1274381
689.6
Extra for making hole in working slab for gas pipe etc including finishing complete in all respect
264
12144
46
P/F powder coated aluminium fitting for doors & windows Folding handle 100mm
2022
171870
85
P/F zinc coated clamp 75 to 110mm dia i/c cost of 12mm screwed GI rod and fastener in RCC roof complete in all respect.
1056
234960
222.5
P/F 60mm x 10mm outer M.S fastener in wall and ceiling with drill machine complete in all respect.
1113
25376
22.8
Providing and fixing 3 mm DND make Fiber sheet round shed with M.I Square pipe 1x1/4 frame i/c labour screw rilicon tab 789 etc complete as per entire satisfaction of Engineer-in- charge
75
220425
2939
TOTAL NS - Civil
-
-
-
NS - P.H.
-
-
-
Providing and fixing in position best Indian make Soap dish fixed into wall with C.P brass screws and complete in all respects including cutting and making good the walls etc. - Soap dish 160 mm. Jaguar Make
267
66750
250
Providing and fixing in position 15 mm i/d C.P brass bib Cocks of best quality (as required by Engineer-in-charge) Jaguar Make Bib Cock long body
1056
475200
450
Bib Cock (Short Body)
1059
423600
400
Providing and fixing in position C.P. brass stop cocks (as approved by the Engineer-in-charge. Jaguar Make i) Stop cock
1857
742800
400
i) Concealed stop cock with flange
528
264000
500
Providing and fixing SWR PVC pipe classic type ‘B’ and specials ISI marked including fitting joint solvent mixture complete in all respect. a) 110mm dia pipe
1821
575345
315.95
b) 75mm dia pipe
4461
1165659
261.3
Specials for 110mm dia pipe - i) Cowel
33
965
29.25
ii) Clamp
594
17107
28.8
iii) Plain Bend
36
3847
106.85
iv) P-trap
102
27520
269.8
v) Socket
330
28562
86.55
vi) Plain tee
264
39112
148.15
vii) Single junction with door / Y Tee
264
43824
166
viii) Gully Trap
66
13200
200
Specials for 75mm dia pipe - i) Cowel
99
2515
25.4
ii) Clamp
1782
49896
28
iii) Plain Bend
99
9004
90.95
iv) Socket
861
62767
72.9
v) Plain tee
792
103792
131.05
vi) Single junction with door / Y Tee
792
110048
138.95
vii) Floor Trap / Nahni Trap
792
86209
108.85
Providing and Fixing of Jet Spray for EWC (Jaquar make)
267
40050
150
Providing and fixing in position CP jali complete in all respect. NS
1062
191160
180
Providing & fixing 32 mm dia PVC waste pipe N.S
531
23895
45
P/F in position G.I union coupling of approved make like UCO, UNIK in G.I pipe line - 15mm dia
528
42768
81
20mm dia
264
31680
120
25mm dia
30
4770
159
40mm dia
30
7680
256
P/F C.P Jali open able or locking system heavy duty approved make complete
795
159000
200
TOTAL NS - P.H.
-
-
-
E.I. (N.S.) PART-I
-
-
-
Wiring in 1.5 sqmm PVC insulated copper conductor cable, single core, 1100 volts in 25mm dia PVC pipe, Heavy gauge, ISI mark with modular accessories and GI sheet steel modular boxes of required size with modular inner & outer face plates complete (Reccesed). (i) Fan Point with 10 amp one way switch :- (b) Medium point
528
264000
500
(c) Long point
264
184272
698
(ii) Light Point :- (a) short point
1056
322080
305
(b) Medium point
1251
591723
473
(c) Long point
678
454938
671
(iii) T/C Light Point :- (c) Long point
384
300288
782
(vi) Call Bell Point :- (c) Long point
264
181104
686
(vii) 5 Pin light plug point with 10 A switch & 10 A socket (wiring with 3 nos. copper wires of 1.50 Sqmm including earth wire for 3rd pin) (a) Short point
792
366696
463
(b) Medium point
792
526680
665
(c) Long point
264
238128
902
(viii) 5 Pin power plug point with 20 A switch & 16 A socket (wiring with 3 nos. copper wires of 4.00 Sqmm including earth wire for 3rd pin) (b) Medium point
549
558882
1018
(c) Long point
852
1209840
1420
S/E of PVC conduit pipe ISI marked (heavy) recessed in wall / ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work. i) 25mm dia recessed type
12060
542700
45
ii) 25mm dia on surface
600
23400
39
iii) 32mm dia on recessed
6591
408642
62
iv) 32mm dia on surface
3090
169950
55
S/E of ISI marked propeller type ventilation fans (Exhaust fan) Size 300 mm, 1400 rpm Heavy Duty suitable for single phase A.C. 230 Volts, 50 HZ supply, A.C capacitor run conferming to IS:23/2/67 , complete with mounting ring with four no.s fixing holes without regulator as per rate contract specifications.with all labour and petty material required.(Havell's - Make & Model -Torboforce or Cormpton Greaves). Heavy Duty
534
1556076
2914
Supply and erection of 300 mm aluminium anodized louver shutter for exhaust fan (Thickness of frame 1.00 mm & blade thickness 0.80 mm) including all labour and other petty material required to complete the job. (Canon, National-Make)
534
194910
365
Supply and erection of surface mounting LED Batten fitting 1x 18/20 watt, (4 feet long), made of high grade poly carbonate body provided for efficient heat dissipation & integrated electronic driver suitable for single phase A.C. 230 Volts, 50 HZ supply, complete in all respect. ( BAJAJ Model - BCLSB 18 W or equivalent model of Makes as per approved brand list )
528
298848
566
Supply and erection of surface mounting LED Batten fitting 1x 9/10 watt, (2 feet long), made of high grade poly carbonate body provided for efficient heat dissipation & integrated electronic driver suitable for single phase A.C. 230 Volts, 50 HZ supply, complete in all respect. ( BAJAJ Model - BCLSB 10 W or equivalent model of Makes as per approved brand list )
264
116688
442
S/E of ceiling fan w/o regulator complete with blades, canopies, shackles down rod suitable for AC 230 V, 50 HZ supply i/c erection charges with petty materials required to comlete the job. 1200 mm sweep havels make + model ES-50 5 star rating our cromption Greava model high Breze plus
528
1059696
2007
ii) 900 mm sweep (Havell's - Make & Model - XP-390 or equivalent model of Crompton Greaves Make as approved by E-I-C of work )
264
660000
2500
Supply and erection of surface/ Recessed mounting, energy efficient LED 6000 K round luminaire, complete with diffuser, HF electronic driver and other material required to complete the job including fixing the same in false ceiling with required material & making necessary connections etc :- i) LED 10 watt rectangular bulk head fitting with opal diffuser & 10 watt LED i/c erection of fitting in wall/Ceiling & making necessary connection to complete the job with all labour and petty material as required. (Make:- Havells / Model- Endura Rugby or equiavalent model of other approved brands).
42
14910
355
ii) 8/12 W Surface Mounted Square Light Fixture. (BAJAJ Model - BZRSQL 18W WH or equivalent model of Makes as per approved brand list)
1527
2724168
1784
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary conneciton, complete in all respect. i) TV socket single shutter one module, complete in all respect including making necessary connections and labour etc.
264
30360
115
ii) Motor Starter 16 amp. to 25 amp, 2 moudle
264
109032
413
iii) 25A, 5Pin Socket with Shutter, 2 moudle
264
75240
285
Supply and Erection of co-axial TV cable (RG-6) with electrolytic grade solid bare copper conductor, gas injected physical foamed polythylene insulation, screened with laminated aluminium tape & aluminium alloy wire braided, jelly flooded & UV grade PVC jacketed in existing pipe, complete in all respect including making necessary connections and labour etc.
7920
150480
19
MDB-INTERN HOSTEL- Supply & Erection of Wall / free standing floor mounting dust & vermin proof campartmentlized cubical MDB-INTERN HOSTEL panel made out of 2mm thick CRCA sheet, required hardware for bus bar and cable alley seperating switching compartment & supporting suitable channel duly painted by 2 coat of zinc / red oxide primier followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having complete with PU / Neoprane rubber gasket, seperate detachable gland plate / MS Channel hinged door with interlocking arrangement for equipment /switch wear with following specifications i/c making necessary connections complete in all respect with all labour and petty material required to complete the job upto the entire satisfaction of the Engineer-in-Charge of the work. ( NS Item )
3
1242000
414000
Incoming
-
-
-
1 No, 630 Amps, FP MCCB with spreader link.
-
-
-
Busbars
-
-
-
1 Set of 800 Amps, 415 Volts, 50 Hz, 3 phase, 4 wire colour coded Aluminum bus bars.
-
-
-
Outgoing
-
-
-
2 No, 400 Amps, TP MCCB with Multidata meter with matching CT's and LED indication lights complete as required.
-
-
-
1 No,315 Amps, TP MCCB with Multidata meter with matching CT's ,MCB and LED indication lights complete as required.
-
-
-
1 No,160 Amps, TP MCCB with Multidata meter with matching CT's ,MCB and LED indication lights complete as required.
-
-
-
2 No,100 Amps, TP MCCB with Multidata meter with matching CT's ,MCB and LED indication lights complete as required.
-
-
-
Instruments
-
-
-
1 No Multidata meter with matching CT's as of main incomer ,MCB and indication lights complete as required.
-
-
-
1 Set of RYB phase indicating lamps (LED).
-
-
-
METER BOARDS- Supply & Erection of Wall / free standing floor mounting dust & vermin proof campartmentlized cubical METER BOARDS made out of 2mm thick CRCA sheet, required hardware for bus bar and cable alley seperating switching compartment & supporting suitable channel duly painted by 2 coat of zinc / red oxide primier followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having complete with PU / Neoprane rubber gasket, seperate detachable gland plate / MS Channel hinged door with interlocking arrangement for equipment /switch wear with following specifications i/c making necessary connections complete in all respect with all labour and petty material required to complete the job upto the entire satisfaction of the Engineer-in-Charge of the work. ( NS Item )
24
1843200
76800
Incoming
-
-
-
1 No, 125 Amps, FP MCCB with spreader link.
-
-
-
Busbars
-
-
-
1 Set of 200 Amps, 415 Volts, 50 Hz, 3 phase, 4 wire colour coded Aluminum bus bars.
-
-
-
Outgoing
-
-
-
12 Nos, 20-60 Amps, Single Phase direct type enegy meter in sealable compartment with 63A DP MCB and LED indication lights complete as required.
-
-
-
Instruments
-
-
-
1 No 0-500 Volts, Digital voltmeter with built in selector switch and protection fuses.
-
-
-
1No 0-100 Amps, Digital ammeter with built in selector switch and matching CT's .
-
-
-
1 Set of RYB phase indicating lamps (LED).
-
-
-
MDB-LIFT- Supply & Erection of Wall / free standing floor mounting dust & vermin proof campartmentlized cubical MDB Lift panel made out of 2mm thick CRCA sheet, required hardware for bus bar and cable alley seperating switching compartment & supporting suitable channel duly painted by 2 coat of zinc / red oxide primier followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having complete with PU / Neoprane rubber gasket, seperate detachable gland plate / MS Channel hinged door with interlocking arrangement for equipment /switch wear with following specifications i/c making necessary connections complete in all respect with all labour and petty material required to complete the job upto the entire satisfaction of the Engineer-in-Charge of the work. ( NS Item )
3
240000
80000
Incoming
-
-
-
1No.100A, 4P, Automatic Transfer Switch (ATS) complying to Standard IEC 60947-6-1 for transfer and 60947-3 for disconnection function.It shall have three distinct stable positions .The ATS shall have all the four poles fully rated with inbuilt phase changeover facility complete as required.
-
-
-
Busbars
-
-
-
1 Sets of 150 Amps, 415 Volts, 50 Hz, 3 phase, 4 wire colour coded copper bus bars.
-
-
-
Outgoing
-
-
-
4 No. 63Amps, TP MCB .
-
-
-
Instruments
-
-
-
2 Set of RYB phase indicating lamps (LED).
-
-
-
MDB-PRESSURIZATION- Supply & Erection of Wall / free standing floor mounting dust & vermin proof campartmentlized cubical MDB-PRESSURIZATION panel made out of 2mm thick CRCA sheet, required hardware for bus bar and cable alley seperating switching compartment & supporting suitable channel duly painted by 2 coat of zinc / red oxide primier followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having complete with PU / Neoprane rubber gasket, seperate detachable gland plate / MS Channel hinged door with interlocking arrangement for equipment /switch wear with following specifications i/c making necessary connections complete in all respect with all labour and petty material required to complete the job upto the entire satisfaction of the Engineer-in-Charge of the work. ( NS Item )
3
282000
94000
Incoming
-
-
-
1 No, 100 Amps, FP MCCB with spreader link.
-
-
-
Busbars
-
-
-
1 Set of 200 Amps, 415 Volts, 50 Hz, 3 phase, 4 wire colour coded Aluminum bus bars.
-
-
-
Outgoing
-
-
-
5 Sets of 16 Amps, 50KA, TP MPCB with overload and short circuit protection for 3.7KW Motor with 1x25A TP Contactor with 2 Nos. Additional NO/NC contact, Single phasing preventor, push buttons, 3 Nos. LED indication light, auto-manual switch etc. complete as required.
-
-
-
Instruments
-
-
-
1 No 0-500 Volts, Digital voltmeter with built in selector switch and protection fuses.
-
-
-
1No 0-100 Amps, Digital ammeter with built in selector switch and matching CT's .
-
-
-
1 Set of RYB phase indicating lamps (LED).
-
-
-
MDB-COMMON AREA- Supply & Erection of Wall / free standing floor mounting dust & vermin proof campartmentlized cubical MDB-COMMON AREA made out of 2mm thick CRCA sheet, required hardware for bus bar and cable alley seperating switching compartment & supporting suitable channel duly painted by 2 coat of zinc / red oxide primier followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having complete with PU / Neoprane rubber gasket, seperate detachable gland plate / MS Channel hinged door with interlocking arrangement for equipment /switch wear with following specifications i/c making necessary connections complete in all respect with all labour and petty material required to complete the job upto the entire satisfaction of the Engineer-in-Charge of the work. ( NS Item )
3
167100
55700
Incoming 1 No, 160 Amps, FP MCCB with spreader link. Busbars 1 Set of 200 Amps, 415 Volts, 50 Hz, 3 phase, 4 wire colour coded Aluminum bus bars.
-
-
-
Outgoing
-
-
-
1 No, 100 Amps, TPN MCCB with spreader link.
-
-
-
1 No, 63 Amps, TP MCB .
-
-
-
1 No, 40 Amps, TP MCB .
-
-
-
1 No, 32 Amps, TP MCB .
-
-
-
1 No, 20 Amps, TP MCB .
-
-
-
Instruments
-
-
-
1 No 0-500 Volts, Digital voltmeter with built in selector switch and protection fuses.
-
-
-
1No 0-160 Amps, Digital ammeter with built in selector switch and matching CT's .
-
-
-
1 Set of RYB phase indicating lamps (LED).
-
-
-
Bus Trunking and accessories
-
-
-
Supplying, fixing, testing & commissioning of 415 Volt, TPN Aluminium, Sandwich, Bus bar trunking with 100% neutral without internal earth, IP-54, suitable for Temperature Rise of 55 degree over and above ambient of 40 Deg as per IEC-61439-6 suitable for short circuit rating of 35 KA r.m.s for 1 second with minimum Class B Mylar insulation and integral earthing. Bus bar trunking enclosure shall be extruded Aluminium housing (from all 4 side) complete with accessories like expansion joint, end covers, Thrust pad , flexible connection etc. complete in all respects as required and rated current as below.
-
-
-
400 Amps Sandwich Aluminium
66
924000
14000
Supplying, fixing, testing & commissioning of the following feeder boxes suitable for use with Rising Main as per item no 1 above for receiving power supply to the Busbar trunking through cable including following rated FP MCCB and provision for incoming supply cable as required. 400 A, FP MCCB (35 KA) with built in O/L, S/C protection with Thermal Magnetic based releases
1
50800
50800
Supplying, fixing, testing & commissioning of below mentioned rating plug in boxes suitable for above busbar trunking alongwith MCCBs with built in O/L, S/C protection with Thermal Magnetic based releases. 125 Amps Tap Off Box with 125 A FP MCCB (35 KA)
8
180800
22600
100 Amps Tap Off Box with 100 A FP MCCB (35 KA)
1
22600
22600
Supplying, fixing, testing & commissioning of Flanged complete as required.
1
8000
8000
Supply and erection of aviation obstructing light LED type complete with supporting bays and of make Philips Cat No. XGP400 1xLED K2/RD 240V only complete the job in all respect with all labour and petty material required.
2
9872
4936
S/E of water cooler of fully Stainless Steel body with 150 ltr /hr Cooling & 150 ltr. Storage Capacity ( USHA / SIDWAL/Violtas -make ) & water Purifier of 50 Ltr./ hr. Capacity ( KENT make ) complete with all labour & petty material reqd. to complete the job.
27
2430000
90000
EI NS-PART-I- Total Amount
-
-
-
E.I. (N.S.) PART-II-LIFTS
-
-
-
Supply, erection, testing and commissioning of 13 passengers (S+8) Electrical Traction Elevator Roomless , Gearless with With Speed of 1.0mtr./ Second serving 9 Stops & 9 Opening with SS Vandal finish, hand rail,Front Mirror, Glass Vision Panel of 500mmx150mm with protection grill on each door. & Antiskid PVC Flooring to be erected in accordance with the following Technical Specification and as per latest IS Specification.
3
9195000
3065000
(i) Make of Lift :- OTIS / KONE / MITSUBISHI / SCHINDLER/ORBIS
-
-
-
ii) Type & capacity : Passanger Elevator App. 884 Kg. 13 person
-
-
-
iii) Speed mps : 1.0 mtr per second
-
-
-
iv) Travelling (max) in mtrs : Aprrox. 28 mtrs
-
-
-
v) Serving : (S+8) 9 stops, 9 opening all opening on same side)
-
-
-
vi) Power Supply : 415 V, 3 phase, 50 HZ A C supply.
-
-
-
vii) Control : Duplex full collective control with or without atendant.
-
-
-
viii) Operation : Automatic
-
-
-
ix ) Motor : Permanent Magnet Synchronous ElectricTraction Gearless Motor to be hoisted on guide rail within the elevator hoistway .
-
-
-
x) Location of Motor : Motor to be hoisted above the rail within the elevator hoist way.
-
-
-
xi) Type of Drive : A. C . Variable Voltage Variable frequency with 16 Bit Microprocessor
-
-
-
xii) Car Size : Min. 1100 mm x 2000 mm or as per manufacturer design.
-
-
-
xiii) Hoist way available : 1850 mm x 2450 mm
-
-
-
xiv) Car Enclosure : Bright Annealed Scratch Resistance Satainless Steel Panel.
-
-
-
xv) False Ceiling : Stainless steel false ceiling in hair line finish
-
-
-
xvi) Car Panel : Stainless steel (scratch free) Hair line finish
-
-
-
xvii) Flooring : S ,1,2,3,4,5,6,7,8 ( Antiskid PVC Flooring )
-
-
-
xviii) Clear Opening of door : 900 mm wide x 2000 mm high
-
-
-
xix) Door Operation : Automatic DC/AC with adjustable Door Opening and closing timings with center opening sliding door
-
-
-
x) Door Frame : Stainless steel in hair line finish
-
-
-
Other Features:
-
-
-
i) Battery operated intercom,emergency alarm and emergency light with maintance free rechargeable battery.
-
-
-
ii) Adjustable guide shoes.(Ensures good ride comfort)
-
-
-
iii) Digital direcion & position indicator in Car & at all landings.
-
-
-
iv) Integral full height car opening panel with luminous combined with direction arrows, overload warning indicator and services cabinet
-
-
-
v) Hands free press and speak intercom with EPABX for three way communication.
-
-
-
vi) Automatic rescue device with Manual rescue Lever (to rescue the Passanger in case of emergency) the device will bring the elevators to the nearest floor and open the door automatically in Case of power / phase failure / low voltage.
-
-
-
vii) Full height infrared safety curtain( Highly sensitive safety device for safe entrance & exit of the Passanger into the Car & automatic floor announcer.
-
-
-
viii) Diffused lighting in car.
-
-
-
ix) Cross floow fans=2 Nos.
-
-
-
x) Looking mirror in side of lift car.
-
-
-
xi) Face plate Finish : stainless steel in hair line.
-
-
-
xii) Face plate : Rectangular.
-
-
-
xiii) A three feet high railing shall be provided on car top
-
-
-
xiv) The motor shall be high starting torque and low starting current and shall be arranged for self lubrication.
-
-
-
xv) Proper weight screen shall be provided at the hoist way.
-
-
-
xvi) Fire retardant compound coated traveling cable shall be used.
-
-
-
xvi) 2 Phase Device Fire Man Drive & Fireman switch at ground floor
-
-
-
xvii) Micro Movements L.E.D. based Buttons .
-
-
-
xviii) Load Weighing device with overload bypass feature.(Audio Visual over load indicator in the car)
-
-
-
xix) Steel items such as Door Frames Sill Angles, Fascia Plates, Spring Buffers.
-
-
-
xx) Braille fixtures, Lift announcement system, Pit ladder, Hand rail , Pressure sensing device & Additional Car Gate Lock .
-
-
-
xxi) Three Side Hand Rails in Stainless Steel Finish
-
-
-
xxii) System Capable of withstanding +10% to –10% Variation in Supply Voltage Fluctuations. ( C.V.T should be provided for Protection of lift against Single phase, Low voltage & over voltage)
-
-
-
xxiii) Car Platform constructed out of Cold Rolled Grain Oriented Formed Sheets of Steel
-
-
-
xxiv) Fire Rated Landing Doors for a Period of One Hour Only.
-
-
-
xxv) The whole machinery shall be mounted on appropriate anti vibration supports to minimize voice and vibration.
-
-
-
xxvi) A handrail not less than 0.60mtr long and 1.0 mtr. Above floor level shall be fixed adjacent to the control panel..
-
-
-
xxvii) The time of automattically closing door shall be minimum 5 seconds and the closing speed shall not exceed 0.25mtr./ Seconds
-
-
-
xxviii) Overspeed governor ( Electro-mechanical device that prevents free fall in case the lift is travelling at speed more than 10% of the rated speed in downward direction.
-
-
-
xxix) All other required features relates the operation of lift by the Handicapts & Blind person as per instruction of lift inspector.
-
-
-
Supply, erection, testing and commissioning of 8 passengers (S+8) Electrical Traction Elevator Roomless , Gearless with With Speed of 1.0mtr./ Second serving 9 Stops & 9 Opening with SS Vandal finish, hand rail,Front Mirror, Glass Vision Panel of 500mmx150mm with protection grill on each door. & Antiskid PVC Flooring to be erected in accordance with the following Technical Specification and as per latest IS Specification.
3
7350000
2450000
(i) Make of Lift :- OTIS / KONE / MITSUBISHI / SCHINDLER/ORBIS
-
-
-
ii) Type & capacity : Passanger Elevator App. 544 Kg. 8 person
-
-
-
iii) Speed mps : 1.0mtr per second
-
-
-
iv) Travelling (max) in mtrs : Aprrox. 28 mtrs
-
-
-
v) Serving : (S+8) 9 stops, 9 opening all opening on same side)
-
-
-
vi) Power Supply : 415 V, 3 phase, 50 HZ A C supply.
-
-
-
vii) Control : Duplex full collective control with or without atendant.
-
-
-
viii) Operation : Automatic
-
-
-
ix ) Motor : Permanent Magnet Synchronous ElectricTraction Gearless Motor to be hoisted on guide rail within the elevator hoistway .
-
-
-
x) Location of Motor : Motor to be hoisted above the rail within the elevator hoist way.
-
-
-
xi) Type of Drive : A. C . Variable Voltage Variable frequency with 16 Bit Microprocessor
-
-
-
xii) Car Size : Min. 1100 mm x 1300 mm or as per manufacturer design.
-
-
-
xiii) Hoist way available : 1850 mm x 1850 mm
-
-
-
xiv) Car Enclosure : Bright Annealed Scratch Resistance Satainless Steel Panel.
-
-
-
xv) False Ceiling : Stainless steel false ceiling in hair line finish
-
-
-
xvi) Car Panel : Stainless steel (scratch free) Hair line finish
-
-
-
xvii) Flooring : S ,1,2,3,4,5,6,7,8 ( Antiskid PVC Flooring )
-
-
-
xviii) Clear Opening of door : 900 mm wide x 2000 mm high
-
-
-
xix) Door Operation : Automatic DC/AC with adjustable Door Opening and closing timings with center opening sliding door
-
-
-
x) Door Frame : Stainless steel in hair line finish
-
-
-
Other Features:
-
-
-
i) Battery operated intercom,emergency alarm and emergency light with maintance free rechargeable battery.
-
-
-
ii) Adjustable guide shoes.(Ensures good ride comfort)
-
-
-
iii) Digital direcion & position indicator in Car & at all landings.
-
-
-
iv) Integral full height car opening panel with luminous combined with direction arrows, overload warning indicator and services cabinet
-
-
-
v) Hands free press and speak intercom with EPABX for three way communication.
-
-
-
vi) Automatic rescue device with Manual rescue Lever (to rescue the Passanger in case of emergency) the device will bring the elevators to the nearest floor and open the door automatically in Case of power / phase failure / low voltage.
-
-
-
vii) Full height infrared safety curtain( Highly sensitive safety device for safe entrance & exit of the Passanger into the Car & automatic floor announcer.
-
-
-
viii) Diffused lighting in car.
-
-
-
ix) Cross floow fans=2 Nos.
-
-
-
x) Looking mirror in side of lift car.
-
-
-
xi) Face plate Finish : stainless steel in hair line.
-
-
-
xii) Face plate : Rectangular.
-
-
-
xiii) A three feet high railing shall be provided on car top
-
-
-
xiv) The motor shall be high starting torque and low starting current and shall be arranged for self lubrication.
-
-
-
xv) Proper weight screen shall be provided at the hoist way.
-
-
-
xvi) Fire retardant compound coated traveling cable shall be used.
-
-
-
xvi) 2 Phase Device Fire Man Drive & Fireman switch at ground floor
-
-
-
xvii) Micro Movements L.E.D. based Buttons .
-
-
-
xviii) Load Weighing device with overload bypass feature.(Audio Visual over load indicator in the car)
-
-
-
xix) Steel items such as Door Frames Sill Angles, Fascia Plates, Spring Buffers.
-
-
-
xx) Braille fixtures, Lift announcement system, Pit ladder, Hand rail , Pressure sensing device & Additional Car Gate Lock .
-
-
-
xxi) Three Side Hand Rails in Stainless Steel Finish
-
-
-
xxii) System Capable of withstanding +10% to –10% Variation in Supply Voltage Fluctuations. ( C.V.T should be provided for Protection of lift against Single phase, Low voltage & over voltage)
-
-
-
xxiii) Car Platform constructed out of Cold Rolled Grain Oriented Formed Sheets of Steel
-
-
-
xxiv) Fire Rated Landing Doors for a Period of One Hour Only.
-
-
-
xxv) The whole machinery shall be mounted on appropriate anti vibration supports to minimize voice and vibration.
-
-
-
xxvi) A handrail not less than 0.60mtr long and 1.0 mtr. Above floor level shall be fixed adjacent to the control panel..
-
-
-
xxvii) The time of automattically closing door shall be minimum 5 seconds and the closing speed shall not exceed 0.25mtr./ Seconds
-
-
-
xxviii) Overspeed governor ( Electro-mechanical device that prevents free fall in case the lift is travelling at speed more than 10% of the rated speed in downward direction.
-
-
-
xxix) All other required features relates the operation of lift by the Handicapts & Blind person as per instruction of lift inspector.
-
-
-
EI NS-PART-II- Total Amount
-
-
-
NS Items (FIRE FIGHTING)
-
-
-
SUPPLY, INSTALLATION, TESTING. & COMMISSIONING OF: Make: Kirloskar/ Crompton Greaves Electrical Motor Driven Fire Pumping set suitable for automatic operation consisting of the following as per the specifications.
3
284100
94700
a) Horizontally mounted, centrifugal type single/ multi stage fire pump having cast iron body, bronze impeller, stainless steel shaft & capable of delivering 900 LPM against a total head of 35 M, pressure gauge with GM cocks on the delivery side including bypass arrangement (with 50 valve and upto 5M G.I. Medium pipes) for periodical testing of the working of the pumping set as per TAC rules
-
-
-
b) Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 Volts +_ 15%, 3 phase, 50 HZ A.C. supply 1450 / 2900 RPM of suitable capacity including electric power contol panel with all accessories for auto operation of pump e.g., single phase preventor, rotary switch, ampere meter, volt meter , starter of suitable capacity, pressure switches to start the pump at predetermined pressure, necessary power cable from panel to motor (approx. 10 HP or as required) for the above pump coupled with flexible copuling including earthing as per relevant Indian Standard & specifications.
-
-
-
c) Common bed plate for mounting Pump and Motor fabricated of Motor fabricated of suitable M.S.Channel as per manufacturer*s recommendations.
-
-
-
d) Suitable Pump-Foundations as per manufacturer's design and 4 nos. Dunlop (cushy foot) heavy duty Antivibration mounting pads. ( for Hydrant down comer on terrace) starter, cable etc.
-
-
-
P/F Black steel Pipes Heavy class IS 1239, including all fittings like, coupling, bends, elbows unions, tees, flanges reducers, offsets etc., making connections, all type of welded or screwed joints as per specifications and making connections required, including cutting holes and chases in brick or RCC walls and making good complete in respects of out side the ground. ( Make Surya, Jindal, TATA )
-
-
-
A) 100 mm dia
180
270000
1500
B) 80 mm dia
24
24888
1037
D) 25 mm dia
42
13188
314
Painting MS pipes with two or more coats of synthetic enamel paint of first grade as per IS Specifications over one coat of red oxide zinc chromate primer including necessary surface preparation complete in all respects. A) 100 mm dia
180
7200
40
B) 80 mm dia
24
768
32
D) 25 mm dia
42
420
10
Providing and fixing pressure gauge 100 mm dia with all accessories complete in all respects. (Feibig / Gluco / Prega / H Guru – Make )
6
10800
1800
Providing and fixing pressure switch with accessories complete in all respects.(Switzer / Indfoss / V Tralag )
3
7200
2400
Providing and fixing of 25 mm dia. Brass Air Release Valve 25 mm dia. Stop with brass stop cock, all accessories as required
6
7200
1200
Providing, fixing, testing and commissioning ISI marked gunmetal fire hydrant valve 80mm single outlet and fitted with 63 mm dia instantaneous female coupling at the outlet complete including companion flange gunmetal Blank cap and chain, nuts, bolts and 3mm thick compressed asbestor gasket at locations as per drawings confirming to IS 5290 Complete in all respects.( Minimax / Zenith / Newage / Vijay / Omex / G- Tech - Make).
54
251532
4658
Providing and fixing gunmetal Two way fire brigade inlet with 63mm dia instantaneous type inlet and 150mm dia flanged outlet with built in check valve for fire brigade connections to fire risers as per IS :904-1965 tested for 20kg/cm2 pressure complete in all respects with companion flanges, nuts, bolts, gaskets etc.
6
45600
7600
Providing and fixing 1st Aid hose reel full swing with 20 mm dia 30 mtr long dia rubber lined dunlop pipe with shut of nozzle, of 6mm outlet. The hose reel shall conform to IS 884, 1969. Rate shall include 25mm dia pipe connection from riser to hose real including socket, nipples, elbows and 25mm dia globe valve complete in all respects. ( GETECH/ NEWAGE)
54
495504
9176
Providing and fixing 63mm dia 15 mtr long reinforced rubber lined hosepipe conf. IS 636-1962, Part A with GM male and female coupling wire wound with GI wire complete in all respects( Make Newage/ Jayshree/CRC / Padmini / Jyoti /Tiger ).
108
503064
4658
Providing & fixing fire authority approved M.S. hose box/ shaft door frame (size 900 (L) x 2100 (H) x 600 mm deep) made out of 16 SWG M.S. sheet Angle frame capable of accommodating fire hose reel, fire hydrant, hose pipe, fittings & accessories. The box shall have a single or double glazed front glass door (with 4 mm thick glass) with lock & key arrangement & shall be painted with Fire red. (For Internal Hydran shaft.)
54
356400
6600
Providing and fixing standard short size gunmetal branch pipe with gunmetal nozzle 15mm dia outlet with standard instantaneous type 63mm dia coupling. (ISI marked IS : 903).
54
109350
2025
Providing and fixing fire extinguisher ISI marked complete in all respects. a) CO2 Type 4.5 kg ISI marked.(IS.15683)
54
360720
6680
b) ABC Type 4 kg Capacity (multipurpose) ISI Marked (IS 15683)
54
108000
2000
S/E of PVC conduit pipe ISI marked (heavy) laid in wall / ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work (b) 25 mm dia on surface
1650
64350
39
S/E of Powder Coted Finished galvanized steel Flush Fire doors of 2hrs Fire rating and tested in accordance with IS 3614 Part 2, & BS 476 Part 22: FRAME : - Door frames to be double rebate profile of 143 x 57 mm manufactured from 18 gauge galvanized steel, profile to have bending radius of 1.4 mm supplied in assembled form ready to install at site. SHUTTER : - Door Shutter in 46 mm thick manufactured from two 20 gauge galvanized steel sheets lock seam jointed at stile edges to form a double skin fully flush shell. Infill of Properitory insulation material to be provided for structural rigidity & additional reinforcements & sound Insulation complete with SS Ball bearing Hinges, Mortise dead lock, SS D-type Handles 300 x 22 mm long, Fire rated Door closer, 6mm thick fire rated wired vision panel of size 200 x 300 mm, Dash fastener with PVC cap i/c installation charges complete in all recpect with all labour and petty material required. MAKE: Pacific/Agni/Om Shakti/Kindle
100.8
846720
8400
Total N.S (FIRE FIGHTING)Amount
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements