Military Engineer Services Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Military Engineer Services - MES Tender
Coronavirus COVID 19
Eprocure
Opening Date
31 Oct 2019Closing Date
CancelledTender Amount
₹ 51,57,00,000Costs
EMD
₹ 15,00,000Document Cost
₹ 3,000Tender Fee
Refer Documents
Summary
Augmentation Of Shore Support Facilities For Spvs
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_MES_293905_1Tender No
CA No DDG CE V TOKEN 23 OF 2017 2018Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Taking down stel windows with shutters n.exc 1.50 Sqm complete all as specified and directed by Engineer-in-Charge.
27
-
-
Taking down steel doors/windows with shutters exc 1.5 sqm but n.exc 4 Sqm complete all as specified and directed by Engineer-in-Charge.
-
-
-
Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness including cover fillets all as specified and directed by Engineer-in-charge.
-
-
-
Demolition/dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed by Engineer-in-Charge.
187.83
-
-
Dismantling wrought iron or mild steel/aluminium work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge.
1.2
-
-
Dismantling of structural steel work incl doors, gates but exclude framed truss etc complete as specified and directed by Engineer-in-Charge.
5
-
-
Taking down/removing existing plastering on old walls built in Cement Mortar complete all as specified and directed by Engineer-in-Charge.
1594
-
-
Taking down eaves/valley gutters and rain water pipes (any size, any pattern) including all fittings and removal complete all as specified and directed by Engineer-in-Charge
450
-
-
Taking up or down 15 mm steel tubing and connections complete all as specified and directed by Engineer-in-Charge.
30
-
-
Taking up or down 20 mm steel tubing and connections complete all as specified and directed by Engineer-in-Charge.
25
-
-
Taking up or down 40 or 50 mm steel tubing and connections complete all as specified and directed by Engineer-in-Charge.
10
-
-
Removing Unserveceable building materials to a distance upto 15 Km out of MOD land complete all as specified and directed by Engineer-in-Charge. Notes:-
(i) Tenderer shall have sanction from GVMC designated places before quoting the tender. If designated place may be varied during execution, no claim shall be entertained on this account.
(ii) Approval if any to be obtained from GVMC for dumping the excavated material of GVMC designated places, the same shall be obtained by the contractor. Nothing extra shall be paid on this ground.
-
-
-
Surface excavation n exc 30 cm in depth and averaging 15cm and getting out in soft/loose soil complete all as specified and as directed by the Engineer-in-Charge.
665.3
-
-
Excavation over areas n. exc. 1.5m deep for foundations, beams, Pile caps and getting out in soft /loose soil complete all as specified and as directed by the Engineer-in-Charge.
834.6
-
-
Excavation in trenches n. exc. 1.5m wide and n. exc.1.5m in depth for foundations, shafts, wells, manholes, pier holes, laying of under ground cables or pipe etc., n exc 10 sq m on plan and getting out in soft/loose soil all as specified and as directed by the Engineer-in-Charge.
-
-
-
Excavation in trenches n. exc. 1.5m wide and n. exc.1.5m in depth for foundations, shafts, wells, manholes, pier holes, laying of under ground cables or pipe etc., n exc 10 sq m on plan and getting out in hard/dense soil all as specified and as directed by the Engineer-in-Charge.
-
-
-
All as per item No 1.018 here-in-before but exc 1.5m but n.exc 3.00m in depth.
87.17
-
-
Returning, filling in including, spreading, levelling, watering and well ramming in layers n. exc. 25cm thick complete all as specified and as directed.
-
-
-
M&L for filling under floors or pavings or below suspended floor with approved moorum/red bajari obtained from outside MD land, spreading in layers n exc. 15 cm thick, levelled and rammed including watering complete all as specified and as directed.
-
-
-
M&L for sand filling in floors or pavings or foundations laid in layer n.exc 15cm thick spread, levelled and rammed including watering complete all as specified and as directed by Engineer-in-charge.
512
-
-
M&L for 150mm thick hard core of gauze n exc 63mm deposited, spread in layers n exc 15cm thick, watered and rammed to a true surface.
4
-
-
Material & labour for drilling or boring for 1000mm nominal dia. bored cast-in-situ piles, through any or all types of strata i.e soft/loose soil, stiff clay, gravel, cobble stone, compact moorum, soft conglomerate or loose boulders, disintegrated rock, weathered rocks etc., (except hard rock for socketing depth) upto top of socketing depth/founding depth by adopting suitable method with perennial water and disposal of drilling/bored materials to a distance exc. 10.00 km and n.exc 15.0km and depositing where directed complete all as specified and as directed by Engineer-in-Charge.
110
-
-
All as per Item No.1.024 here-in-before but 800mm nominal dia.
55
-
-
All as per Item No.1.024 here-in-before but 600mm nominal dia.
1925
-
-
All as per Item No.1.024 here-in-before but 500mm nominal dia.
357.5
-
-
All as per Item No.1.024 here-in-before but 450mm nominal dia.
302.5
-
-
All as per Item No.1.024 here-in-before but through hard rock for founding minimum 2D (Where D is dia of pile) Mtr depth or 1.5m depth whichever is higher for 1000mm dia. nominal dia piles.
8
-
-
All as per Item No.1.024 here-in-before but for 800mm dia. nominal dia piles.
4
-
-
All as per Item No.1.014 here-in-before but for 600mm dia. nominal dia piles.
140
-
-
All as per Item No.1.024 here-in-before but for 500mm dia. nominal dia piles.
26
-
-
All as per Item No.1.024 here-in-before but for 450mm dia. nominal dia piles.
22
-
-
Notes for Item Nos. 1.024 to 1.033:
(i) The depth of boring for piles shall be measured from existing ground/bed level/river bed top (as per soundings/reduced levels taken at the commencement of work) to the approved founding level.
(ii) It shall be ensured that the waste bentonite slurry/ drilled or bored material is pumped off from the premises to locations shown as approved by GVMC by contractor at his own cost. The distance mentioned in description of item shall be the shortest distance from the centre of the building.
(iii) All channels/tanks made for bentonite circulations shall be filled with approved moorum obtained by contractor at his cost after clearing all bentonite cakes.
(iv) The contractor may use any approved method as approved by GE for boring without any extra cost to the Govt. The rates for boring of piles shall be inclusive of any method/ casing that may be used by the contractor for bored piles. Nothing extra shall be paid.
(v) For the purpose of payment of boring/drilling, description of hard rock shall be as given in particular specification.
(vi) The size of cutting tool shall not be less than diameter of pile by more than 75 mm.
(vii) The rates quoted by the contractor shall be inclusive of the rates for the shifting and setting up of piling rig as many times as required.
-
-
-
Carrying out initial load tests on test piles as per standard procedure laid down in IS-2911 by static load test method including compressive strength including construction of test cap, dismantling the cap after the test and clearing the site and maintaining complete records of load settlements etc. as specified and directed by GE and submission of reports for a test load of 775 tonne in non-working areas in the vicinity, including the cost of new piles for 1000mm dia with specification as same as working pile with minimum depth of socketing into the hard rock 2D (Where D is dia of pile) or upto 1.5m depth whichever is higher etc all as specified and directed.
1
-
-
All as per Item No 1.034 here-in-before but for the load of 338 ton including cost of new pile of 600mm dia new pile.
1
-
-
All as per Item No 1.034 here-in-before but for the load of 263 ton including cost of new pile of 500mm dia new pile.
1
-
-
All as per Item No 1.034 here-in-before but for the load of 225 ton including cost of new pile of 450mm dia new pile.
1
-
-
Carrying out routine load test (working pile) as per standard procedure given in IS-2911 (Part IV) 1985 by static test method for 1000mm dia. Piles for a test load of 465 ton complete all as specified and as directed by Engineer-In-Charge
1
-
-
All as per Item No 1.038 here-in-before but for the load of 203 ton for 600mm dia new pile.
1
-
-
All as per Item No 1.038 here-in-before but for the load of 158 ton for 500mm dia new pile.
1
-
-
All as per Item No 1.038 here-in-before but for the load of 135 ton for 450mm dia new pile.
1
-
-
Removal of excavated material to a distance exc. 10 Km but n. exc. 15.0 Km and depositing where directed complete all as specified and as directed by the Engineer-in-Charge.
Notes:-
(i) Tenderer shall be sanction GVMC designated places before quoting the tender. If designated place may be varied during execution, no claim shall be entertained on this account.
(ii) Approval if any to be obtained from GVMC for dumping the excavated material of GVMC designated places, the same shall be obtained by the contractor. Nothing extra shall be paid on this ground.
-
-
-
M&L for PCC 1:4:8 type D2 (using 40mm graded Granite stone aggregate) as in foundation filling, mass concrete and underneath pile caps, suspended flooring/slab, beams, plinth protection etc. complete all as specified and as directed by the Engineer-in-Charge.
-
-
-
M&L for PCC 1:2:4 type B2 using 40 mm graded stone aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and as directed by the Engineer-in-Charge.
53
-
-
M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in cills, copings, benching in bottom of drains and the like including weathering, slightly rounded or chamfered angles etc complete.
17
-
-
M&L Providing precast cement concrete Type B-1 (1:2:4) 20mm graded aggregate as in landings, cover slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces setting in mortar complete with joints to match, all as specified.
11.25
-
-
Material and labour for PCC (1:3:6) type C1, using 20mm graded stone aggregate as in cills, coping, bonders and the like set in CM (1:6) etc complete all as specified and directed.
-
-
-
Material and labour for 100mm thick PCC (1:3:6) type C1, using 20mm graded stone aggregate as in plinth protection etc complete all as specified and directed.
147.6
-
-
M&L for providing precast cement concrete 1:2:4 type B0 using 12.5mm graded granite stone aggregate as in jallies 40mm thick including all moulding set in CM 1:4 complete all as specified and directed by Engr-In -Charge.
192
-
-
M&L for extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends complete all as specified and directed.
250
-
-
M&L for reinforced cement concrete (Ready mix concrete) by design mix M-40 grade (Using 20mm graded stone aggregate) as in bore holes using portland slag cement and admixture conplast SP-432 A2 or equivalent for piles in tremie method including necessary dewatering, formwork, concrete mixed in RMC plant, transporting, placing, compacting, vibrating etc., complete all as specified and directed by the Engineer-in-Charge.
799.7
-
-
Notes:
(i) Design mix shall be as per IS-456-2000 and max size of aggregate shall not exceed 20mm and the slump shall be 150 to 180mm.
(ii) Reinforcement shall be measured and paid separately.
(iii) Unit rate shall be deemed to include interalia for preliminary design mix, works test cubes as specified.
(iv) Minimum cement content shall be 400 Kg/ Cu.m. of concrete for M40 (Piles) using Portland slag cement with minimum slag content of 50% (fifty percent) which ever is higher.
(v) Admixture shall be added as per manufacturer instructions. The rate for Admixture Conplast SP-430-A2 or Equivalent shall be deemed to be included in the quoted rate.
(vi) The unit rate shall be deemed to include carrying out non-destructive integrity test for 100% of the total number of piles as per IS 14893-2001 by Government Engineering College / IIT Chennai in presence of rep of Accepting Officer and contractor and the test results shall be signed by the all concerned.
(vii) In case at the time of mix design cement content is increased beyond minimum content given no extra payment will be made.
(viii) Standard manufactured cover blocks as per IS should be used, Site cast cover blocks not be used
-
-
-
M&L for reinforced cement concrete of grade M-40 (Design mix using 20mm graded stone aggregate) using ready mix concrete including supply and mixing of admixtures, as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, pile caps, suspended floor beams & slabs, plinth protection, basement slabs, under-reamed piles etc. using portland slag cement and handling, conveyance, errection with alignment in true position complete all as specified and as directed by the Engineer-in-Charge.
-
-
-
All as per item No.1.052 here-in-before but slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, duct slab, RCC gutter, parapet wall and in shelves and the like.
6.93
-
-
All as per item No.1.052 here-in-before but as in columns, Pillars, piers, vertical bands, posts and struts etc.
-
-
-
All as per item No.1.052 here-in-before but as in floor beams, roof beams, cantilevers, bressumers, middle beams, lintels over 1.5m span and lintel bands etc.
-
-
-
Notes for item Nos. 1.052 to 1.055:
(i) Minimum cement content shall be 400 Kg/Cu.m. of concrete for pile caps, suspended floor beams, slabs and footings, platform (Covered under item No.1.052) and shall be 360 Kg/Cu.m .of concrete for M-40 using Portland slag cement with minimum slag content of 50% (fifty percent) for items covered under item Nos. 1.053 to 1.055.
(ii) Design mix shall be as per IS-456-2000. Maximum size of aggregate shall not exceed 20 mm and slump shall be 50mm to 100mm and maximum water cement ratio 0.4. (iii) Unit rate shall be deemed to include for interalia for preliminary design mix and works test cubes.
iv) Reinforcement shall be measured and paid for separately.
(v) In case at the time of mix design cement content is increased beyond minimum content given no extra payment will be made.
(vi) Standard manufactured cover blocks as per IS should be used, Site cast cover blocks not be used
-
-
-
Chipping of laitance concrete in piles above cut of level upto a maximum of 1m from cut of level and disposal to distance of exc. 10.0Km but n. exc. 15 Km and depositing to location as approved by GVMC.
22.52
-
-
M&L for brick work using fly ash bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge.
-
-
-
M&L for brick work using fly ash bricks, straight or curved on plan to any radius in half brick thick walls (100mm thick) built in cement mortar 1 :4 including supply and fixing of 2 Nos of 8mm dia CRS TMT bars at every fourth course of brick work complete all as specified and as directed by the Engineer-in-Charge.and directed.
-
-
-
M&L for cutting out bricks, forming toothing for and bonding new brick work into old work including value or new material entering in old walls and jointing and pointing in CM 1:6 complete all as specified and directed by Engineer-in-Charge.
4.6
-
-
M&L for walling of random rubble massonary uncoursed, well bonded and bedded and solidly hearted built in CM(1:6) all as directed by Engineer-in-Charge.
190
-
-
M&L for hammer dressing to face stone with maximum depression 20mm over walling of random rubble massonary all as directed by Engineer-in-Charge.
500
-
-
Use and waste steel formwork to sides of concrete foundations, pile caps, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished surfaces of concrete complete all as specified and directed by Engineer-in-Charge.
-
-
-
All as per item No.1.062 here-in-before but to soffits of suspended slab as roof slab floor slabs, landing, balconies, shelves horizontal/sloping and similar works n. exc 200mm thick finished fair and even.
-
-
-
All as per item No.1.062 here-in-before but to chajja and similar items including edges , flat for fair finished surface of concrete
16.5
-
-
All as per item No.1.062 here-in-before but to sides and soffits of floor or roof beams, cantilevers, bressumers, lintel beams, RCC bands etc.
-
-
-
All as per item No.1.062 here-in-before but to sides of pedestal, pillars, posts, struts, columns stanchions square rectangular or polygonal fair finished and the like
-
-
-
All as per item No.1.062 here-in-before but to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work incuding attached pillasters, buttresses etc vertical or to batter complete all as specified and directed.
1119.58
-
-
Use and waste of steel form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floors and roofs etc. Exc. 10cm but n. exc. 20cm wide for fair finished surfaces of concrete complete all as specified and directed by the Engineer-in-Charge.
-
-
-
M&L for reinforcement in any situation using Corrosion resistant TMT steel bars of grade Fe-500D, 10mm dia. and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. or securing with clips complete all as specified and as directed by the Engineer-in-Charge.
-
-
-
All as per item No. 1.069 here-in-before but 5mm dia. and over upto and above as in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. or securing with clips complete all as specified and as directed by the Engineer-in-Charge.
-
-
-
M&L for providing and installing 6mm thick MS liner for bored cast-in-situ concrete piles with necessary stiffeners, driving shoe with continuous welding including cutting, bending welding etc. confirming to Fe-410-W (Gde E-250 Quality B) all as specified and as directed by the Engineer-in-Charge.
Notes:- (i) Rate shall be inclusive of cutting the liner at cut off level. The rate is deemed to include for cutting, removal and salvage value of the material so obtained.
(ii) MS liner shall be driven upto refusal level or -15.00mtr level whichever is lesser irrespective what shown in the drawing, the occurrence of refusal level will be decided by GE at site based on visual inspection of bailer samples from pile bore hole, past experience and laboratory test result. The decision of GE in this regard will be final and binding.
(iii) MS liner will be measured and paid up to the cut off level only of pile . Additional MS liner if used for convenience of construction shall be included in the rates quoted. No extra shall be paid separately on this account.
149205
-
-
M&L for Framed work as in duct frame of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including Hold fast ,hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete of E-250, Quality-A complete all as specified. .
1850
-
-
M&L MS chequered sheet Confirming to Fe-410-W (Ge E-250 Quality A) as in cover of ducts with lifting arrangements complete all as specified and directed by Engineer-in-Charge.
12750
-
-
M&L Steel rolling shutters, gear operated type with ball bearing with bevel gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer with 1.25 mm laths and guide chanels including locking arrangement erected in position complete all as specified and as directed by Engineer-in-charge.
15.04
-
-
M&L mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n.exc 15 cm long and dia of neck 20 mm complete all as specified and as directed by Engineer-in-Charge.
56
-
-
M&L for making proper two legged scaffolding arrangement with required MS pipes to repair the Chajjas, beams, columns and walls upto height 10m height complete all as specified and directed.
75
-
-
M&L Forming 12mm thick Expansion joints filled with pre-formed bituminous filler for 100 mm thick plinth protection and top 30mm primed and sealed with sealing compound, Grade ‘B’
-
-
-
S & F MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410-W (Gde E-250 quality A) complete all as specified and as directed by Engineer-in-charge.
4653
-
-
M&L base/Bed plate circular/square conforming to Fe-410-W (Gde E-250) Quality A cut or notched forming holes without any attachment complete all as specified and as directed by the Engineer-in-Charge.
121
-
-
Supply and fixing Trapezoidal profiled galvalume sheeting in lengths upto 12m to suit the site requirements.The profiled sheets shall be made out of 0.50mm base metal thickness, Cold Rolled steel of 550 Mpa yield strength conforming to IS 513 (1994) with hot dip metallic coating at minimum 150 gm/Sq.m. zinc- aluminium alloy coating mass (55% Aluminium, 43.5% zinc and 1.5% silicon) total of both sides. The colour shall have a total coating thickness of 35 micron of silicon modified super durable polyester paint system of approved colour, comprising of 20 microns exterior coat on top surface and 5 microns reverse coat on back surface over 5 microns primer coat on both surfaces.Roofing/wall cladding sheets shall be factory cut and supplied in required lengths (of upto 12 m) to suit shop drawings. The roofing/wall cladding sheets shall be crest fixed with 12- 14X55mm SDST screws ITW/ Corroshield make IS 1022 base material with TEK3/TEK4 point having flange thickness of minimum 2mm with special cyclonic washers all as per manufacturer's instructions. Roofing/wall cladding sheets shall be crest fixed with minimum 5 Nos. of above specified screws per metre sheet width at all the purlins/runners. Colour of sheeting shall be grey or apprroved by GE.
120
-
-
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/flashing/cladding to wall, fixed with self tapping screws as specified
-
-
-
M&L structural steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410-W(Gde-E-250) all as specified and directed
-
-
-
Material and labour for structural steel work in Plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade-E-250 quality-A with riveted bolted or welded attachment all as specified and directed.
4653
-
-
S&F Framed work such as grills, gratings, etc. with ends of bars
shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165
600
-
-
Supply and fix stainless steel of grade SS 316 L pipes of 50 mm dia (thickness not less than 2 mm) as in ladder railing with SS cap at bottom of posts, fabricated, welded and fixed as indicated in drawings including necessary specials and grinding/ buffing at welded portion to match with shining of pipe complete all as specified and as directed by Engineer in charge.
-
-
-
Supply and fix chainlink mild steel PVC coated GI wire (5mm dia) mesh of 50x50mm nominal pitch as in fencing/mesh enclosure complete all as specified and directed.
100
-
-
Supply and fixing false ceiling grid of armstrong make or its equivalent mineral fibre acoustical suspended ceiling system with MINATUFF (MICRO LOOK) edge tiles with ARMSTRONG XL 15mm EXPOSED GRID.
-
-
-
S&F Powdercoated aluminium snap grid frame false ceiling consisting of 25X25X2mm aluminium angles and TEEs of size 25x25x2mm and 12mm thick gypsum board of size 595X595mm on aluminium grid including supply and fix galvanised wire of required length and 2mm dia hanger grid suspended from trusses/ ceiling and purlins n. exc. 1200mm c/c both ways complete all as specified and as directed by the Engineer-in-Charge
-
-
-
S&F Anodised Aluminium frame powder coated for doors, windows, ventilators partitions and door/window/ventolator shutters and similar work using standard aluminium sections of approved make, transparent or dyed of required shade according to IS-1868 (minimum anodised coating of grade AC 15), fixed with rawl plugs and aluminium anodised/stainless steel screws or expansion hold fasteners including snap beading and filling up gaps with PVC/neoprene felt. Aluminium sections shall be smooth, rust free, straight mitred and jointed mechanically wherever required including angle cleats, CP brass or stainless steel screws including supply and fix glazing with rubber gasket and panel inserts complete all as specified.
Note:- supply and fix glazing with rubber gasket and panel inserts shall be measured and paid separately. only aluminium item shall be measured for quantity except hinges, handles, tower bolts etc.
-
-
-
S&F aluminium powder coated decorative grill for doors and windows with one or more rebates including jointing cleats/beading 'U' or 'H' channel for fixing etc. complete all as specified and as directed by the Engineer-in-Charge.
140
-
-
Supply and fixing 5.5mm thick sheet glass of ordinary quality of approved brand and including PVC/Neoprene gasket for glazing, glazing clips in doors, windows, partitions in squares not exc 0.50 Sqm in each pane etc.complete all as specified and as directed by Engineer-in-charge.
-
-
-
All as per Item No 1.091 here-in-before but exc 0.50 sqm each pane.
-
-
-
Supply and fixing 5.5mm thick toughned/tempered glass, tensile strength not less than 65 Mps incuding necessary drilling holes etc complete all as specified and directed.
39
-
-
S&F 12mm thick pre-laminated particle board exterior grade pre-laminated on both sides with decorative choice lamination and fixed in aluminium partitions/doors with aluminium glazing clips complete all as specified and directed by the Engineer-in-Charge.
-
-
-
S&F Solid PVC wall lining as in acoustic treatment (sound proof) consting of 5mmt thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frames complete all as specified and directed by the Engineer-in-Charge.
1307.8
-
-
S&F Solid PVC strips and channel feathered at the edged for fixing on solid PVC wall lining without PVC sheet complete all as specified and directed by the Engineer-in-Charge.
1307.8
-
-
S&F 125mm size butt hinges, extruded aluminium alloy with galvanised mild steel pin, anodised and fixed, type C-21 complete all as specified and directed.
9
-
-
S&F for 150mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
3
-
-
S&F for aluminium anodised, skeleton tower bolts 125mm longs with plate, staples and bolt of extruded section and fixed complete all as specified.
6
-
-
S & F 200mm long aluminium anodised barrel tower bolt.
6
-
-
S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
3
-
-
S&F brass mortice locks, vertical type 100mm size 4 levers all as specified and as directed by Engineer-in-Charge.
3
-
-
S&F floor door stopper 150mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
3
-
-
Supply and fixing Acoustical treated doors from SHAKTI-MATE DOORS Ltd or equivalent complete all as specified and as directed by Engineer-in-charge.
20
-
-
S&F factory made solid PVC door frame of size 50 mm x47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supply and fix in openings as per specification and drawing.
21
-
-
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engineer in charge.
12
-
-
M &L Water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terrace etc., consisting of following sequences of of operations on RCC surfaces. ( a) Roof slab shall be cleaned throughly and apply cement slurry@3 kg/sqm. (b) Applying a cement plaster of 10 mm thickness in CM 1:4 mixed with water proofing compuond finished smooth. (c) Clean the surfaces throughly and apply a coat of blown grade bitumen @1.2 kg/sqm over bitumen primer @0.5 kg/ sqm. (d) Polymeric water proofing (Attatic poly propelene) membrane 3 kg/ Sqm shall be laid over the entire surfaces. ( e) A coat of hot blown bitumen 85/25 grade @1.20 Kg /sqm shall be aapplied over water proofing membrane and finally it shall be finished with a coat of bitumeneous aluminum paint @0.1 kg/sqm.
-
-
-
M&L for 30mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and directed by Engr-In -Charge.
587
-
-
M&L for 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
-
-
-
M&L for Rubber sheet fabric backing or insert and plain coloured with ribbed or fluted toping laid in floors 5mm thick complete all as specified and directed.
85.1
-
-
M&L for roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust etc all as specified and directed.
120
-
-
M&L for flooring with coloured non skid ceramic tiles (shade as approved) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified and as directed by the Engineer-in-charge.
42
-
-
M&L for glazed ceramic tiles in vertical surface 350x250x7mm set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified and as directed by the Engineer-in-charge.
50.4
-
-
M&L Acid resistant tiles 15 mm thick vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type in floors complete all as specified and directed.
-
-
-
M&L chequered cement concrete tiles 20cmx20cmx25mm thick set jointed and pointed in cement slurry in floors with gray cement and pigments in floors complete all as specified and directed.
-
-
-
All as per item No. 1.0115 here-in-before but as in skirting/vertical surfaces with gray cemnt and pigments.
-
-
-
M & L for coloured industrial tiles of size 300X300mmwith minimum thickness of 20m, fully tactile vitrified unglazed porcelain tile in floor etc. Set and jointed in neat cement slurry and pointed in white or coloured cement match the shade of tiles, complete all as specified and as directed by Engineer-in-charge.
587
-
-
M&L for rendering 5mm in CM 1:3 as in ceiling finished even and fair without using extra cement.
60
-
-
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces of walls in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
1140
-
-
M&L for 15mm thick rendering in two coats, 5mm in CM(1:4) mixed with water proofing compound, over 10mm thick in CM(1:6) on external surfaces and finished even and smooth without using exta cement. Note: Supply of WPC will be measured and paid for separately.
360
-
-
M&L for 15mm thick rendering in CM(1:6) on fair faces of brickwrk/concrete and finished even and smooth without using exta cement.
-
-
-
M&L for 15mm thick rendering in CM(1:4) mixed with water proofing compound on fair faces of brickwrk/concrete and finished even and smooth without using exta cement. Note: Supply of WPC will be measured and paid for separately.
1447.75
-
-
M&L for rendering 5mm in CM 1:3 as on faire faces of concrete surface finished even and smooth without using extra cement..
53.5
-
-
M&L for rendering 15 mm thick on stone masonry surfaces or surfaces other than fair faces of brick work or on one side of lathing in cement mortar 1:6 and finished smooth and even without using extra cement.
525
-
-
Supply only Integral Water Proofing Compound.
-
-
-
Material and labour for preparing of new gypsum board surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer all as specified.
-
-
-
M&L for preparation of newly plastered surfaces of ceiling and applying two coats of distemper oil emulsion includingchalk whitening complete as specified and directed by Engineer-in-Charge.
1140
-
-
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by the Engineer-in-charge.
60
-
-
M&L for applying two coat of oil bound distemper over a coat of alkali resistant primer on walls including preparation of newly plastered surfaces all as specified and as directed by the Engineer-in-charge.
-
-
-
M&L for preparation of newly plastered surface of wall and applying two coat of exterior emulsion weather proof paint with anti fungal properties over a coat of primer all as per manufacturer instructions complete all as specified and directed
360
-
-
M&L for preparation of new or previously untreated surface of steel or steel based surface of any description, not otherwise described , over 10 cm in width or girth and applying two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-charge.
-
-
-
M&L for applying two coat of oil bound distemper over a coat of alkali resistant primer on walls including preparation of old treated surface plastered surfaces all as specified and as directed by the Engineer-in-charge.
1450
-
-
Supply and fix Galvanised steel water tubing 15 mm dia medium grade conforming to IS:1239 (Part I) including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid on floors including testing complete all as specified and as directed by the Engineer-in-charge.
30
-
-
All as per Item No. 1.133 above but 20mm dia
25
-
-
All as per Item No. 1.133 above but 40mm dia
-
-
-
Supply and fix 40mm dia High density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq. cm including all fitings fixed to wall are laid in floor complete as directed by engineer-in-charge.
6
-
-
S&F chromium plated 15mm bore stop valves, fancy type, cast copper alloy, with long shank and cup, screwed down high pressure with crutch or butterfly handle screwed for iron pipe, unions or brass ferrule complete all as specified and as directed by Engineer in charge.
9
-
-
All as per Item No. 1.137 here-in -before but 20mm bore.
7
-
-
Supply and fixing for 40 mm dia stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, but fancy type, chromium plated with long shank and cup (concealed type) complete and fixed as specified and directed.
3
-
-
Cutting existing steel tubing of bore of pipe 40mm or 50mm for alteration or additions done in position without taking down (Each cut measured).
2
-
-
S&F 15mm dia fancy type stop valve, cast copper alloy chromium plated with long shank (Concealed type), screwed down, high pressure. Made of JAQUAR Model No QQT-7083K or its equivalen all as specified and directed.
9
-
-
S&F 20mm dia fancy type stop valve, cast copper alloy chromium plated with long shank (Concealed type), screwed down, high pressure. Made of JAQUAR Model No QT-7083K or its equivalent all as specified and directed.
7
-
-
S&F 15mm bore chromium plated pillar taps, fancy type, cast copper alloy with capstan heads, screwed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by Engineer in charge. Made of JAQUAR Model No LYR-38021 or its equivalent all as specified and directed
6
-
-
S&F for Vetreous china wash down water closet pan EWC (padestal pattern) with 'P' or 'S' trap, plastic water closet seat, black closed pattern with flat bottom and cover etc. Made of JAQUAR Model No SLS-WHT 0318 or its equivalent all as specified and directed.
3
-
-
Material and labour for Vitreous china wash down water closet pan IWC (squat pattern) with 'P' or 'S' trap including Flushing cistern 10 Ltrs capacity, plastic water closet seat, black closed pattern with flat bottom and cover and fixing charges of flushing cistern etc. Made of JAQUAR Model No SLS-WHT 0318 or its equivalent all as specified and directed.
7
-
-
S&F vitreous china wash hand basin, white, flat back, size 630x450mm excluding taps, waste, chain and flug and porcelain stopper including brackets including cutting for and pinning in ends of brackets, 40mm dia CP brass waste fittings complete all as specified and as directed by Engineer - in - Charge. Model No. FNS-WHT 0606 of Jaquar or its equivalent as approved by GE.
9
-
-
S&F brass chromium plated Tubular towel rail, 60cm long between flanges complete all as specified and directed by Engineer-in-charge. Make: Model No T6001A of PARRYWARE MAKE OR EQUIVALENT OF Jagaur/cera as approved by GE.
2
-
-
S&F Vitreous China half stall type urinals, with grating and union, white (excluding flushing cistern and flush pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including 32 mm dia PVC polythene waste pipe of suitable length from the urinal to trap of below complete all as specified and directed by Engineer -In-Charge. Model No -URS-WRT 0701 of Jaquar or equivalent as approved by GE.
18
-
-
S&F bevelled edge mirror 8 mm thick of selected quality glass mounted on 6 mm thick commercial plywood/ AC building board and fixed to wooden plugs with CP brass screws and cup washers and provision of wooden beading around the mirror complete all as specified and as directed by Engineer - in - Charge.
9
-
-
S&F PVC valve less, syphonic action type low level flushing cistern, 10 ltrs capacity, white with inlet ball valve, float and handle soft touch type including brackets, PVC flush pipe etc complete fixed with CP brass screws complete all as specified and as directed by Engineer in charge.
10
-
-
S & F 110mm dia PVC (SWR), EWC connector bent type and jointed with solvent cement complete as specified and directed.
3
-
-
S&F 75mm bore PVC (SWR) soil, waste, rain water and vent pipes, single socketed in any length as required with rubber ring joints laid in trenches or in floors complete all as specified and as directed by Engineer-in-charge.
18
-
-
All as per item no 1.152 here-in-before but 110mm dia.
20
-
-
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with bracket complete all as specified and directed.
22
-
-
All as per Item No. 1.154 here-in-before but 110mm bore as in rain water pipe.
150
-
-
S&F 75mm bore PVC (SWR) bends of any radius complete all as specified and directed by Engineer-in-charge.
6
-
-
All as per item no 1.157 here-in-before but 110mm dia.
-
-
-
S&F 75mm bore PVC (SWR) branch pieces, (single Y), equal or unequal ordinary or inverted with oval acces door complete all as specified and directed by Engineer-in-charge.
4
-
-
All as per item no 1.158 here-in-before but 110mm dia.
-
-
-
S&F PVC (SWR) vent cowl for 75mm including jointing with solvent cement complete all as specified and directed by Engineer-in-charge.
2
-
-
All as per Item No. 1.160 here-in-before but 110mm dia.
2
-
-
S&F Stack clamps for 110mm dia pipes, out of 50mm by 5mm flat iron and 16mm dia round iron stays incuding botls & nuts complete all specified and directed.
12
-
-
S&F 200mm bore PVC (SWR) rain water pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
30
-
-
S&F 200mm bore PVC (SWR) bends of any radius complete all as specified and directed by Engineer-in-charge.
4
-
-
S&F 200mm bore PVC (SWR) branch pieces, (single Y), equal or unequal ordinary or inverted with oval acces door complete all as specified and directed by Engineer-in-charge.
2
-
-
S&F Stack clamps for 200mm dia pipes, out of 50mm by 5mm flat iron and 16mm dia round iron stays incuding botls & nuts complete all specified and directed.
10
-
-
S&F PVC(SWR) floor/nahani trap 75mm size wih grating including jointing to waste pipe with solvent cement complete all as specified and as directed by Engineer in charge.
10
-
-
S&F 15mm dia 450mm long PVC water connection pipe with PTMT nuts complete all as specified and as directed by Engineer in charge.
18
-
-
Make the concrete surface neat & clean and applying the bonding agent NITOBOND EP over this concrete surface to make the bond with new concrete including materials and labour charges etc. Complete all as specified and directed by Engineer-in-Charge.
3.5
-
-
Chip off removal the existing plastering and loose concrete with hammer and chisels & using chipping machines wherever necessary including tools and machineries and labour charges etc complete all specified and directed by Engineer-in-Charge.
24.75
-
-
Removal of existing corroded reinforcement (Rings & Distributors) and providing new CRS reinforcement by welding to the columns and sunshades wherever necessary including materials and labour charges etc. Complete all as specified and directed by Engineer-in-Charge.
108
-
-
Providing and fixing of sacrificial anode GLAVASHIELD XP or equivalent over the main reinforcement of the column and sunshades, reinforcement at 1 No for 1 Sqm radius for sunshades and 01 No for 1mtr ht for column as per the manufacturer specification. As sacrificial anodes protect the reinforcement against the corrosion. The cost of all materials and labour charges etc complete include and as directed by Engineer-in-Charge.
25
-
-
M&L for Clean the old and new reinforcement properly using wire brushes and applying anticorrosive NITROZINC PRIMER to the bars including materials and labour charges etc.
24.75
-
-
M&L for Make the concrete surface neat & clean and applying the bonding agent NITOBOND EP over this concrete surface to make the bond with new concrete including materials and labour charges etc.
-
-
-
M&L for Making tight form work to the necessary size for the Microconcerting including materials and labour etc.
24.75
-
-
M&L for Pouring Microconcrete using RENDEROC RG for 50-75mm thick with in 12mm below grade chips and required water including materials, tools and labour charges etc complete all as specified and directed by Engineer-in-Charge.
24.75
-
-
M&L for Applying curing compound NITOBOND AR on the Microconcrete surface after removal the form work including materials, tools and labour charges etc.
24.75
-
-
M&L for Applying Protective coat DECKGUARD after the curing compound application over microconcrete surface including materials, tools and labour charges etc.
24.75
-
-
Material and labour for drilling holes concrete floors 28mm dia in existing RCC slab/beam to 150mm depth by core cutting machine for inserting 20 mm dia steel bars in position and grouted with and including chemical HILTI HIT RE 500 as per manufectures instructions.
70
-
-
Material and labour for drilling holes concrete floors 24mm dia in existing RCC slab/beam to 200mm depth by core cutting machine for inserting 16 mm dia steel bars in position and grouted with and including chemical HILTI HIT RE 500 as per manufectures instructions.
125
-
-
Supply of Enclad FPS (coverage per kg-2.3 SQM)
1462
-
-
Supply of Chemclad P4C (Coverage per Kg 6.5 SQM)
544
-
-
Application of Enclad FPS & Chemclad P4C on surface of fitting shop for machine shop complete as per manufacturer specification and as directed by engineer in charge.
3400
-
-
SUB TOTAL OF SCHEDULE "A" Part - I
-
-
-
SCHEDULE "A" PART - II [INTERNAL ELECTRIFICATION]
-
-
-
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, credit and making good distributed surface & wall/ceiling to match the existing complete all as specified and directed, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc for taken in to schedule of credit complete all as specified and directed by Engineer-in-Charge.
650
-
-
Taking down sub main wiring of any size upto 6 Sqmm including fittings and fixtures complete
1300
-
-
M&L for Taking down ceiling/exhaust fan of any size and any model from ceiling/wall height as existing, dismantling blades and removing fans for workshop for repair complete all as specified and directed by Engr-in-Charge
46
-
-
Taking down old unserviceable MCB DBs and MCBs of any type and any size from various buildings and making good disturbed surfaces complete all as directed by engineer-in-charge
20
-
-
M&L for point wiring with 1.5 Sq.mm. (nominal cross sectional area) FRLS PVC insulated unsheathed cable with copper conductor, single core multi stranded 1100 V graded confirming to IS 694-1977 (For Phase and neutral) drawn in concealed conduit including provision of 20mm dia. rigid PVC conduit as per IS 9537 (Part-I 1983) with conduit accessories, including concealed terminal boxes fabricated 2mm thick MS sheet fitted with 3mm thick Hylam sheet top cover for fixing switches including 1.5 Sqmm ine single core PVC unsheathed cable with multi stranded copper conductor as earth condunity conductor and connected to common earth dolly.
325
-
-
All as per item No. 2.05 but with 1.5 sqmm one light controlled by 2-way switches including 1.5 Sqmm one single core as earth continuity conductor and connected to common earth dolly.
15
-
-
All as per Item No 2.05 here-in-above but with 1.5 sqmm for 5 Amp switch socket combination with 1.5sqmm single core PVC unsheathed cable with multi stranded copper conductor as earth continuity conductor and connected to comomn earth dolly.
50
-
-
All as per Item No 2.05 here-in-above but with 2.5 sqmm for 5/15 Amp switch socket combination complete including 2.5sqmm one single core PVC unsheathed cable with multi stranded copper conductor as earth continuity conductor an connected to common earth dolly.
60
-
-
All as per item No. 2.05 but with 4 sqmm for metal clad Switch socket including 4.0 Sqmm one single core as earth continuity conductor and connected to common earth dolly.
200
-
-
M&L for provision of metal clad enclosure with 2 pin and earth plug and socket complete with SP MCB 20 Amps.
200
-
-
Supply and fix 5A 230V flush type switch Single pole , One way
325
-
-
All as per item No. 2.11 here in before but 2 way
30
-
-
Supply and fix 5 A 230V switch/ Socket outlet multi purposes flush type
50
-
-
Supply and fix switch socket outlet multi purpose 3 pin 15 amp and one pin 5 amp controlled by one switch.
60
-
-
Supply & fix surface mounted LED FTL fitting 1 x 40W including fixing arrangement like PVC round blocks, screws etc and suitable connecting 3 core copper cable from ceiling rose to light fitting complete .
234
-
-
Supply & fix surface mounted LED fitting 1 x 15W including fixing arrangement like PVC round blocks, screws etc and suitable 3 core connecting copper cable from ceiling rose to light fitting complete .
45
-
-
S & F Air Circulator fans ( wall mounted type) 230 volts single phase oscillating 450 mm sweep suitable for wall mounting and suitable connecting 3 core copper cable from ceiling rose complete all as specified and as directed by Engr-in-Charge .
40
-
-
S & F Air Circulator fans ( wall mounted type) 230 volts single phase oscillating 600 mm sweep suitable for wall mounting and suitable connecting 3 core copper cable from ceiling rose complete all as specified and as directed by Engr-in-Charge
28
-
-
Supply & fix Pedestal type Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting and suitable connecting 3 core copper cable from ceiling rose complete all as specified and as directed by Engr-in-Charge.
18
-
-
Supply and fix energy efficient ceiling fan 1200mm Energy efficient with stepped type electronic regulator and extension down rod.
14
-
-
Material and labour for provision of heavy duty exhaust fans energy efficient of size 230 V, 450 mm sweep with louvers including connecting 3 core copper cable and PCC work complete all as directed.
20
-
-
Material and labour for provision of heavy duty exhaust fans energy efficient of size 230 V, 300 mm sweep with louvers including connecting 3 core copper cable and PCC work complete all as directed.
14
-
-
M&L for circuit/ sub main wiring with two runs of 6.00 Sq.mm. nominal cross section area FRLS PVC insulated unsheathed cable with copper conductor, single core multi stranded 1100 V along with one run of 6.00Sq.mm. FRLS PVC insulated unsheathed cable with copper conductor, single core multi stranded as earth wire through and including 25mm rigid PVC concealed conduit and accessories, medium grade complete all as specified and as directed by the Engineer-in-Charge. Note :- Two runs of cable as specified, one run of earth wire and one run of conduit shall be measured as one unit.
400
-
-
All as per item No 2.23 here in before but two run of 4.00 sqmm and one run of 4.00 sqmm as earth wire.
600
-
-
M & L for Sub-main wiring with 5 run of 6.0 sqmm cable PVC unsheathed 1100 V grade multi stranded copper conductor including earth wire and drawing into and including in 25 mm rigid PVC conduit including accessories and earth wire all as specified and as directed by Engr-in-charge.
300
-
-
S&F High bay LED fittings of 150 W including hanging arrangement/fixing arrangement for fixing of light fitting as indicated by channels, clamps, nuts & bolts etc complete including connecting 3 core copper cable of suitable size from ceiling rose to light fittings complete.
30
-
-
Supply and fixing DB TPN 6 way (Double door) comprising the following (a) MCCB TP 63 Amp 16 KA - 01 No ( Incoming) (b) RCCB upto 40 Amp ,SPN - 05 Nos (c) MCB upto 40 Amp ,SP - 10 Nos
6
-
-
Supply and fixing DB SPN 8 way (Double door) comprising the following (a) RCCB upto 40 Amp 10 kA - 01 No ( Incoming) (b) MCB upto 40 Amp 10 kA - 06 Nos
6
-
-
S&F MCB DB SPN 4 ways with provn of MCB RCCB 40 Amps 10 kA -1No, MCB SP 6-40 Amps-4 Nos
8
-
-
M&L for earthing with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground earth pit not less than 2.25m deep below ground level with top edge of the plate not less than 1.5m below normal ground level connected to galvanized iron strip 4 mm GI wire by means of nuts, bolts, checknuts, washers of galvanized iron or steel all as shown in electrical Plate No 3 of SSR Part-I connected to earthing test point including excavation/earth work in any strata PCC chamber with PCC cover slab with 15mm bore GI protection pipe but all as directed.
8
-
-
S & F of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated suituation for loop earthing etc. as required 4 mm Galvanised iron wire.
100
-
-
M & Lfor celing rose surface bakelite 65 x 50 mm having 3 terminal.
325
-
-
Material and labour for Flame proof point wiring with 2.5 Sq mm (nominal area) PVC insulated unsheathed FRLS cable with copper conductor, single core multi stranded 1100 V graded confirming to IS 694 : 1977 drawn in concealed/surface stove enamelled steel conduit of size 20 mm dia with all accessories like as solid Elbows, saddles etc including 20 mm metallic flexible pipe at the connecting point where necessary and 2.5 Sqmm one single core PVC unsheathed FRLS cable with multi stranded copper conductor as earth continuity conductor and connected to common earth dolly all as specified and directed by Engr-in-Charge.
4
-
-
S & F Switch flame proof rotary type with termination box in LM6, 16A, Single pole 230 V all as specified and directed by Engr-in-Charge
4
-
-
M&L for Fluorescent tube light fitting flameproof type FLP - WP of T5 2 x 28 W including integral reflector made of alluminium ally LM 6 with electronic ballast, bipin holders, connector block, fixing arrangement with back plate etc and all accessories pre-wired and including connecting up with twin core twisted flexible copper FRLS conductor with suitable size in flexible metal pipe of suitable size all as specified and directed by Engr-in-Charge
4
-
-
S & F MCCB 4 pole 250 Amps, 36 KA, 415 Volts with enclosure.
15
-
-
S & F MCCB 4 pole 160 Amps, 36 KA, 415 Volts with enclosure.
30
-
-
S & F MCCB 4 pole 63 Amps, 16 KA, 415 Volts with enclosure.
30
-
-
SUB TOTAL OF SCHEDULE "A" Part - II
-
-
-
SCHEDULE "A" PART - III [EXTERNAL ELECTRIFICATION]
-
-
-
Supply & install transformer step down, indoor type, copper wound , top up with transformer oil etc complete with standard fittings, HT 11 KV 3 Phase, LT 433 volts, 3 Phase 4 wire DYN11, Natural Easter oil immersed KNAN, level - 3, confirming to IS:2026 / IS :1180 & IEC 62270 standard, HV cable box & LV cable box as per specification with off load tappings on HT side to vary secondary voltage within limit & of capacity 500 KVA complete all as specified in perticular specification of CA and as directed with all standard accessories complete all as specified and as diercted.
Make : Schneider/ABB/BHEL/Voltamp/ CG
1
-
-
Supply Installation, testing commissioning of 11 KV HT switchboard consisting of motorised automated VCB totally enclosed 250 MVA , 400 Amp , 25 kA as outgoing extension to the existing panels including adaptor panels to connect existing panel , VCB panel indoor type totally enclosed freestanding floor mounting type, compartment based with truck mounted VCB motor operated spring type electrically and manually charged operating mechanism suitable for horizontal isolation , horizontal draw out type VCBs with copper bus bars, self supported insulated bus bar with full voltage rated should be used. The switchgear panel shall be of sheet steel construction with Aluminium Zinc not less than 2.5 mm thickness for load bearing section and not less than 2 mm thickness for non load bearing sections and shall totally dust and vermin proof. The VCB panel confirming as per IEC 62271-100/200 standards and IP 4X class of protection comprising necessary bus bars extension and connections and following protective and control devices as specified below. Circuit breaker shall be suitable for E2, M2, C2 duty. Vacuum interrupters of the circuit breaker shall also be the manufacturers of the Vacuum interrupter, relay, Panels shall have built in feature of condition, Thermal , Environmental & circuit breaker monitoring along with HMI as per specifications. The switchgear and control gear panels shall be of fully arc proof arc proof for 1 sec. Make : Schneider / ABB / BHEL / Siemens / CG
2
-
-
Relay shall be be microprocessor based numerical relay communicable type in line with IEC 61850 protocol and RS-485 port comprising of three over current, one earth fault protection relay with high set for both phase & earth and with fault memory equivalent , universal auxiliary supply, master trip relay, trip circuit supervision relay, digital multifunction meter with RS-485 port with 0.5 with 3 Nos copper wound double ratio double core current Transformer having CT ratio 100-50/5-5A for outgoings, PT, MFM 0.2 class, power pack complete all as specified and as directed. Note:- For transformer outgoing differential relay & Annunciator 12 window shall be considered. The switch gear shall be have temperature measurement sensors at all critical points medium voltage cable connection & busbar joints/ connections. The system shall help operator during local investigation and local monitoring . This HMI shall give access to the condition monitoring. This HMI shall give access to condition monitoring data and alarms. while operate is inside the MV electrical room, HMI .: Make : Schneider / ABB / BHEL / Siemens / CG
-
-
-
(a) 11 KV 400 A Incomer with Outgoing Panel (i) Continous high conductivity electrolytic copper bus bar, Reychem insulated for full voltage, phase identification made at the end by colored tape, bus bar shall be mounted on intergral seal off bushing and interconnection with electrolytic grade copper with joints silver plater.
(ii) Circuit Breaker shall be mounted on a withdrawable truck which shall be horizontally drawout from service position to isolated position. (iii) Motorised spring Charged Mechanism
(iv) Cast Resin current Transformer, 11 KV, 100-50/5-5A, 15VA, CI 5 P10, C10.5-3 Nos
(v) Cast resing Three pahase potentail Transformer 11 KV/1.732/110V/1.732, 100 VA, CI 05-03 Nos with desired capacity PT Fuses. (vi) Accessories like local remote selector switch, breaker control switch (TNC), space Heater with Thermostat, DC & AC Control Ckt through MCB, Indicating LED lamps for RYB pahses, Spring charged, DC supply Healthy, Breaker ON/OFF, Breaker in service, Test, disconnected position. (vii) Multifuctional meter
-
-
-
(viii) 1 Nos of SCADA compatible feeder protection relay with ( over & under voltage relay ), (3 phase over current), N (Earth over current), 51 V (voltage controlled over current), (3 Phase under current), (Negative phase sequence over current), N (Residual over voltage), (directional power protection (under/over active/recative power), U/o (under/over frequency), (Thermal overload), (Auto Reclose), BF (Circuit Breaker Failure detection), Cold pickup, inrush Blocking. Relay will be on Modbus protocol. (ix) High speed Master Trip Relay - 01 No (Schneider/ABB/ALSTOM/Siemens/CG)
(x) Trip Circuit supervision Relay - 01 No (Schneider/ABB/ALSTOM/Siemens/CG)
(xi) Short time rating for 3 Seconds as per IEC 62271-100
(xii) Anti pumping Relay - 01 No (Schneider/ABB/ALSTOM/Siemens/CG)
(xiii) Air insulated rear end Bottom entry cable box suitable for termination of XLPE cables (xiv) Panel must have additional features
(xv) Continous rated closing/tripping coils
(xvi) Spring charging handle
(xviii) Manual closing/tripping of the CB with compartment door closed
-
-
-
(xvi) Transformer Fault Alarm/Trip Aux, Relay for transformer feeder only - 02 Nos ABB/ALSTOM/Siemens/CG
(xvii) Anti pumping Relay - 01 No ABB/ALSTOM/Siemens/CG
(xviii) Air insulated rear end Bottom entry cable box suitable for termination of XLPE cables (xix) Panel must have additional features
(xx) Continous rated closing/tripping coils
(xxi) Spring charging handle
(xxii) Manual closing/tripping of the CB with compartment door closed
(xxiii) Short time rating for 3 seconds as per IEC 62271-100
(xxiv) Annuclator (12 Window) for Transformer Feeder Make : Miniec or equivalent
(xxv) Mechanical endurance test - M-2
-
-
-
Supply laying & testing HT cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty)with stranded aluminum conductor, 11000 volts grade, of size 3 core 400 sq mm complete all as specified and as directed by Engr-in-Charge
260
-
-
All as per item No. 3.03 here-in-before but of size 3 core 240 Sqmm.
150
-
-
Supply and laying in trenches or ducts or passing through the pipe, testing and commissioning of cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric LT power cable (heavy duty) with stranded aluminium conductor 1100 volts grade of size 3.5 core 240 Sqmm complete all as specified and as directed by Engr-in-Charge
100
-
-
All as per item No. 3.04 here-in-before but of size 3.5 core 120 Sqmm
100
-
-
All as per item No. 3.04 here-in-before but 3.5 core 50 Sqmm.
250
-
-
All as per item No. 3.04 here-in-before but 4 core 25 Sqmm.
300
-
-
Supply install and test of LT Panel factory made I/D type as per IEC 61439 part I & II ( switch gear OEM Design) fabricated out of 2 mm thick CRCA sheet of minimum thickness for load bearing member / Doors- 2 mm, Non load bearing member / Internal portions 1.5 mm, Gland plate / Base channel 3mm, Board floor mounted, dust & vermin proof 3 phase 4 wire with rated operational voltage 415 Volts, rated insulation voltage of 1000 V and impulse withstand of 12 KV & minimum internal Arc with stand of 65 kA, 500 msec as per IEC 61641, weather proof, with separate hinge door for each compartment with operating handle & locking arrangement with back door common openable / lockable, grouted in PCC 1:2:4 with 20 mm graded agregate complete, painting as per OEM defined 7 tank process with epoxy powder polymerised at high temperature and 2000A, aluminium busbar (TPN) suitable for double compression aluminium cable gland.The degree of protection is IP - 45 and panel shall withstand fault level of 65 KA for 1 second and certificate obtained from CPRI for similar panels of the approved manufacturing firm shall be produced with the following accessories including dismantling of old existing panel all as specified and as directed :- Incoming :-
(a) ACB 1600 A, 4 pole, 50kA, 415 V, EDO with ZSI function & LCD display for current & Voltage metering with O/L, S/C, E/F protection - 01
(b) Digital multi function meter with class - 0.5, with RS 485 communication-01 No
(c) Digital ammeter with inbuilt secletor switch with suitable CTs - 01 Nos
(d) Digital Voltmeter with inbuilt selector switch - 01 No
(e) RYB LED phase indicator - 01 set Contd.../-
2
-
-
Outgoing:-
(a) ACB 800 A, 4 pole, 50kA, 415 V, EDO with ZSI function & LCD display for current & Voltage metering with O/L, S/C, E/F protection - 01
(b) MCCB 4 pole,350 Amp 36 kA with O/L, S/C, E/F protection - 01
(c) MCCB 4 pole, 100 Amp 16 kA with O/L, S/C, E/F protection - 02
(d) MCCB 4 pole,63 Amps 16 kA with O/L, S/C, E/F protection- 05 (e) MCCB 4 pole, 40 Amps 16 kA with O/L, S/C, E/F protection- 04
(f) spare compartment suitable for 200 A 16 kAcapacity MCCB - 02 Nos
-
-
-
Supply and fix HT cable jointing kit for 11 KV grade cable for in door termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 400 sq mm
2
-
-
Supply and fix HT cable jointing kit for 11 KV grade cable for in door termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 240 sq mm
2
-
-
S&F ON load change over switch of 1250 Amp
1
-
-
Material and labour for removing Of old XLPE cable of any capacity
1260
-
-
M &L for dismantling existing transformer and panel boards of capacity upto 500 KVA and handed over to GE (I) DM where directed.
1
-
-
M & L for Earthing complete with galvanised steel earth plate electrode 60X60cmx6mm thick electrode and 25x4mm galvanised strip as earth lead, buried directly in ground(earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level and earth plate to be connected by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specifeid and directed by Engr-in-charge. Note : Earth strip will be measured after 7.5mtr from the earth strip or earth testing terminal block whichever is lesser under relevant item.
-
-
-
Supply, install, test and commissioning of Solar Street Light system LED (luminarie with 1 LED mounting each), PV module- 1 x74 Wp or 2 x 37 Wp under STC lamp- 1 xLED (28 W), 4-pin, around 900 + 5 % lumens, battery 1 x 12V, 75 AH, Tubular Plate, low maintenance type lead acid battery, (C/10 discharge rate), and other components like - Control electronics, module mounting hardware, battery box, inter connecting wires/cables, swtiches, operation and Pole 4 mtrs height with batery luminaries and battery box fixtures etc, complete all as directed.
24
-
-
M&L for sand cushioning below cable and levelling and ramming complete all as specified and directed by Engr-in-Charge.
100
-
-
Supply and laying reinforced pre cast concrete cable cover, class LV Type I flat size 250 mm x 150 mm x 40 mm complete.
7840
-
-
M&L for removing excavated material n.exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge
105
-
-
S&F of cable tray made out of 2 mm thick CRCA sheet including fixing on wall to fix the cable complete
150
-
-
Supply and laid HDPE Pipes PN 10 complete including fittings 100 mm (4”) dia for protection pipe for cable including mannual boring complete all as specified and as directed by Engr-in-charge.
20
-
-
Supply and laid HDPE Pipes PN 10 complete including fittings 150 mm (6”) dia for protection pipe for cable including mannual boringincluding mannual boring complete all as specified and as directed by Engr-in-charge. .
20
-
-
Supply and laid HDPE Pipes PN 10 complete including fittings 50 mm (2”) dia for protection pipe for cable laid in complete all as specified and as directed by Engr-in-charge.
10
-
-
Supply and laid HDPE Pipes PN 10 complete including fittings 75 mm (3”) dia for protection pipe for cable complete all as specified and as directed by Engr-in-charge.
10
-
-
Supply and laid HDPE Pipes PN 10 complete including fittings 100 mm (4”) dia for protection pipe for cable complete all as specified and as directed by Engr-in-charge. .
10
-
-
SUB TOTAL OF SCHEDULE "A" Part - III
-
-
-
SCHEDULE "A" PART - IV [EXTERNAL WATER SUPPLY]
-
-
-
Pipes galvanized, “Medium class”, supplied And laid complete including fittings 50 mm (2”) dia.
100
-
-
Pipes galvanized, “Medium class”, supplied And laid complete including fittings 25 mm (1”) dia.
100
-
-
Supply and fixing for Sluice valve, flanged of class PN 1.6 of size 50 mm dia including steel spindle with head, iron wheel, gland with gland packing, etc and necessary fixing arrangement like rubber gasket etc., complete all as specified and as directed by Engineer-in-charge.
1
-
-
Material and labour for cutting existing CI/DI pipe line of sizes 100 mm and inserting CI/DI tees 100x100x100 mm dia both end spigot socket and other side flanged in ground/walls floor etc including testing complete all as specified and as directed by the Engineer-in-charge.
1
-
-
Supply and fixing reducer T joint 150x150x100mm for branch pipe including making opening 150mm dia from existing ring main sea water line all as specified and directed by Engr-in-Charge.
1
-
-
M&L for valve chamber including excavation in any type of soil, spreading, levelling and refilling etc. PCC (1:4:8) type D2 for foundation, brick work of one brick thick wall in CM (1:4) including internal plaster 15mm thick in CM (1:4) external plaster 15mm thick(1:4) and providing coping in PCC (1;2:4) type B1, angular iron frame of size 50x50x6mm with 3mm thick MS plate cover complete including locking arrangements and having FRP coating of 2mm thick on both inside and outside surfaces complete as specified for the size of chamber 1000mm x 1000mm x 600mm complete all as specified and directed
1
-
-
S & F 2000 Litres capacity of rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) triple layered ISI marked, hoisted and fixed in position (nearly top of the building) complete including foundation & float valve all as specified all as specified and directed by the Engineer-in-Charge.
1
-
-
S&F Cock, bib, brass, screwed down 25 mm (1”) dia pipe.
3
-
-
SUB TOTAL OF SCHEDULE "A" Part - IV
-
-
-
SCHEDULE "A" PART - V [FIRE FIGHTING]
-
-
-
S&F CO2 cylinder 45 Kgs capacity confirming to IS-7285 : Part 2 : 2004.
28
-
-
S&F CO2 Gas with 99.9% purity filling per Kg
1260
-
-
S&F CO2 Cylinder Bank Accessories ( Suitable for 14 Nos of 45 Kg. Capacity CO2 Cylinder.
2
-
-
S & F CO2 Master valve with DIN477 threading standard
2
-
-
S&F 24 V DC Solenoid valve suitable for CO2 Master Valve CO2 Slave Valve
2
-
-
S & F Manual Lever made out of Brass Suitable for CO2 Master valve, provided with safety Locking Pin.
2
-
-
S & F Master cylinder valve protection cap with flange .
2
-
-
S&F Non return valve suitable for CO2 master cylinder
2
-
-
CO2 slave valve with inbuilt pneumatic actuator with DIN477 threading standard
26
-
-
S&F Non return valve suitable for CO2 master salve cylinder
26
-
-
S & F 3/16" High pressure discharge hose
28
-
-
S & F 3/16" High Actuation hose
26
-
-
S&F CO2 Nozzle with cone horn
30
-
-
S&F weather proof pressure switch
2
-
-
S&F manifold safety Valve
2
-
-
S&F Continuous gas weight monitor - Analogue LED type
28
-
-
S&F Continuous gas weight monitor control panel
1
-
-
S & F Microprocessor based analogue intelligent networking type fire alarm panel with 4 x 20 Alpha numeric LCD display, Event logging and printing facility, Real time clock & RS-485 port to connect repeater panel via 4 wire, keyboard programming with password locking. Provision of RS-232 for LAN connection with 12 Hrs back up facility UPS system for AFDC panel. Provision of connecting fire fighting equipments as required to areas specified. Make: Honeywell/ Morely/Raval/GST/Apollo
(a) TCP/IP Ethernet Coupler.
(b) Channel Digital I/O Card with Bus End Terminal.
(c) Twin CAT SMS/SMPT server CE : Server for sending
1
-
-
S & F multi sensor type (Smoke/Heat) sensors 2 wire suitable to connect fire alaram panel and to be installed as per IS specifications .
66
-
-
S&F Detector with mounting junction Box.
66
-
-
S&F Manual Gas Discharge Station
3
-
-
S&F CO2 Abort / Inhabit switch box assembly
3
-
-
S&F Discharge warning sign board ( Display unit)
3
-
-
S&F 2" CO2 directional valve with pneumatic actuator & Limit switch.
3
-
-
S & F Pilot CO2 cylinder 6.8 Ltrs W/C filled with 4.5 Kg CO2 gas with Ceoduex/SIRI/Simens Make master cilynder valve & Accessoriess and release valve
2
-
-
S&F Mannual lock out valves with supervisory Limit switch of 50NB Sizes
2
-
-
S & F seamless pipes with suitable fittings of sizes 50mm nominal bore.
30
-
-
All as per item no. 5.27 here-in-before but 40mm nominal bore.
110
-
-
All as per item no. 5.27 here-in-before but 25mm nominal bore.
40
-
-
S & F 2X 12 V DC, 32 AH SMF Lead acid Battery
2
-
-
S&F PVC insulated copper 2 core 1.5 Sqmm armoured heavy duty fixed on wall/roof/on surface with necessary fixing clamps.
1050
-
-
Provision of Cean agent fire fighting using fire sense technology for EDG control room
(a) Extinguishing agent : 16 Kg clean agent Dupont FE - 36.
2
-
-
(b) Fire trace tube for automatic fire detection and suspension system made by special modified Polyamide,
198
-
-
(c) Fire trace end of line adapter with pressure gauge for automatic fire suspention tube used for fitting at the end of the tube for pressurizing & repressurizing the tube includes check Valve, Pressure gauge and fitting to connect to sensor tubing, tube connection 6 mm.
4
-
-
(d) Fire trace pressure switch to monitor pressure drop in the tube, switch points 5 Bars
4
-
-
(e) Master control Unit with internally power card, main power card with space of 2 Nos of 12 V 7 Ah Battery 4 zone line with zone wise hooter & common Hooter connection and also to inter connect with FACP
4
-
-
Supply and Fixing AFFF fire extinguisher 9 ltrs capacity cartridge type as per IS 15683 with IS mark as per Naval pattern type.
10
-
-
Supply and Fixing CO2 fire extingusher 4.5 KG capacity with Hose & Horn type as per IS 15683 with IS mark as per Naval pattern type.
10
-
-
Supply and Fixing DCP fire extinguisher 9 Kg capacity with ABC type as per IS 15683 with ISI mark as per Naval pattern type.
10
-
-
Supply and Fixing CO2 fire extinguisher of 22.5 Kg capacity with ISI mark as per Naval pattern type.
2
-
-
Supply and Fixing AFFF fire extinguisher 50 Ltrs capacity with ISI mark as per Naval pattern type.
2
-
-
S&F of fire stand along with 02 in Nos galvanised fire buckets 14 Ltr capacity
10
-
-
Testing and commissioning of the fire fighting system and submitting M&O mannuals as building drawings etc, 01 year warranty all as directed by the Engr-in-charge.
1
-
-
SUB TOTAL OF SCHEDULE "A" Part - V
-
-
-
SCHEDULE "A" PART VI- [LIGHTING PROTECTION]
-
-
-
Supply & fix single pointed air termination Aluminium rod, 12 mm dia, 300 mm long.
5
-
-
M & L for Aluminium strip 25 x 3 mm with saddles and fixing screws etc for roof conductors and down conductors above aground including procelian insulators .
200
-
-
M&L for Test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hex head screw including test box of 300 x 250 x 30 mm for fixing test terminal block made of MS sheet 3 mm thick complete
4
-
-
SUB TOTAL OF SCHEDULE "A" Part - VI
-
-
-
SCHEDULE "A" PART - VII [EOT CRANE]
-
-
-
Design, fabricate, supply, errect, test and commissioning of 30/5 Ton Capacity EOT crane push button and radio remote control system complete with span of 18 Mtrs (approx), long travel of 38 Mtr and lift hook 09.5 Mtr from floor level including supply, laying of crane track rail of suitable cross section on gantry girder including auxillary hoist, three phase, electrically operated with connected accessories like rope drum, steel wire rope, sheaves, pulleys, hydraulic thruster brake, single phase preventer, over load relay, SFU, air brake contactor, main hoist motor, micro hoist motor, cross travel motor, long travel motor, lifting hook, service platform, ladders, buffers , provision safety siren for overload, safety hookes/clamps on wall for operation and maintainance of track and DSL system etc complete all as specified and directed by Engineer-in-Charge including the following:-
(a) Design supply, install, test and commissioning DSL system with PVC shrouded copper bus bar for 3 phase and neutral including earth bus system all as specified suitable for 30/5 TON EOT Crane.
1
-
-
(b) Supply of tools as per the list of OEM specifications.
(c ) Supply of spares for two years operation and normal maintenance as per the list of OEM specifications.
(d) Provision of LT power cable of suitable size from the panel board to crane.
(e) Provision of additional push button system with interlocking wiring etc., complete as per OEM specification.
(f) Main hoist speed - 3 Mtr/min (g) Main creep speed - 0.3 Mtr/min
(h) long tavel speed - 10 Mtr/min (j) Long creep speed - 1 Mtr/min
(k) Cross travel speed - 10 Mtr/min (l) Cross creep speed - 1 Mtr/min
-
-
-
Design, fabricate, supply, errect, test and commissioning of 10 Ton Capacity EOT crane push button and radio remote control system complete with span of 17 Mtrs (approx), long travel of 36 Mtr and lift hook 9.5 Mtr from floor level including supply, laying of crane track rail of suitable cross section on gantry girder including auxillary hoist, three phase, electrically operated with connected accessories like rope drum, steel wire rope, sheaves, pulleys, hydraulic thruster brake, single phase preventer, over load relay, SFU, air brake contactor, main hoist motor, micro hoist motor, cross travel motor, long travel motor, lifting hook, service platform, ladders, buffers , provision safety siren for overload, safety hookes/clamps on wall for operation and maintainance of track and DSL system etc complete etc complete all as specified and directed by Engineer-in-Charge including the following :- (a) Design supply, install, test and commissioning DSL system with PVC shrouded copper bus bar for 3 phase and neutral including earth bus system all as specified suitable for 10 TON EOT Crane.
1
-
-
(b) Supply of tools as per the list of OEM specifications.
(c ) Supply of spares for two years operation and normal maintenance as per the list of OEM specifications.
(d) Provision of LT power cable of suitable size from the panel board to crane.
(e) Provision of additional push button system with interlocking wiring etc., complete as per OEM specification.
(f) Main hoist speed - 3 Mtr/min (g) Main creep speed - 0.3 Mtr/min
(h) long tavel speed - 10 Mtr/min (j) Long creep speed - 1 Mtr/min
(k) Cross travel speed - 10 Mtr/min (l) Cross creep speed - 1 Mtr/min
-
-
-
M&L for dismantling of existing crane 30/5 and 10 ton including motor system, gantry raillings & DSL system complete and handed over to user as directed by Engineer-in-charge.
2
-
-
SUB TOTAL OF SCHEDULE "A" Part - VII
-
-
-
SCHEDULE "A" PART - VIII [EDG]
-
-
-
M&L for dismantling of existing 1.1 MW EDG of 03 Nos incuding connecting accessories i.e HT control panel, HT Cables, Auxilary Transformer, breaker units, EDG safety alarm panel, all type of fuel pipe lines, CO2 fire fighting system, exhaust chimney and cables from altenator to main swtich board and main swtich board to CDS 1 complete and handed over to User Dept all as specified and as directed by Engr-in-charge.
1
-
-
Supply , install, testing and commissioning of 3125 KVA / 2500 KW 11 KV DG set with engine model No QSK95 series engine and alternator with class HF and 40 % . The DG sets are fully integrated power generation systems providing optimum performance, fuel economy, reliability and versatility for stationary standby, prime and continuous power applications and other standard accessories complete including Control panel consisting of 03 suitable capacity VCBs for incomer and 02 bus coupler, 03 Nos Outgoing and 01 Nos VCB for auxiliary transformer with metering equipment, syncronising panel, battery system, 750 auxiliary transformer, cooling tower, ventilation fans, water pumps, fuel pumps, exhaust system, acoustic system, bus duct, mechanical components, starting air system, cooling system and controlling panel, earthing, cable tray and safety terms complete, necessary requirements as per manufacturer recommendations including all as specified in Particular Specification of CA and as directed by GE.
3
-
-
NOTE:- (1)Pre-Inspection & Testing shall be carried out in the Indian Dealers premises. If testing facility available or manufacturer premises before despatch to the site . (2)Fuel and all consumables should be arranged by the contractor will be deemed to be included in the quoted rate.
(3) HT & LT cable, Cable joint kits, End termination kit, HT VCB panel, Auxiliary transformer, Earthing, Earth continuity conductor, Cable trays and sfety items shall be measured and paid separately.
(4) The contractor has to make own arrangement for Diesel and load bank for testing of DG Set specified in PS. (The rate quoted is deemed to be included in the quoted rate). Foundation required as per OEM recommendation is deemed to be included in the quoted rate. (5) The 11 KV DG set with other standard accessories comprising of the following items .The cost of accessories given below in serial (a) to (g) is deemed to be included in the quoted rate.
(6) Drain Tank for Lube oil ( 2.5 Kl) including foundation and necessary civil work and 3" drain pipe from engine to drain tank are deemed to be included in quoted rate.
-
-
-
(a) Aluminium Air Insulated Bus Duct for Transformer to MCC panel as per site requirement. (i) 1250A 3 Phase 4 wire 415 V Bus duct suitable for connection of 3 DG sets. (ii) CU Flexible. (iii) Adopter Box Considered for Transformer side.
(b) Mechanical Compnents as per site requirement. (i) Cooling Tower for Engine cooling System (ii) PHE for LT cooling System (iii) PHE for HT cooling System (iv) AH unint Genset Ventilation Fan (v) LT water pump not less than 1100 LPM ( 1 working + 1 Standby) with base frame, IE2 Motor. (vi) HT water pump not less than 2600 LPM ( 1 working + 1 Standby) with base frame, IE2 Motor. (vii) Raw water pump for cooling Tower not less than 148 M3/HR ( 1 working + 1 Standby), IE2 Motor (viii) Compressor Skid ( One no Electrical Driven + 1 No Engine Driven Compressor (ix) Air Receiver, Air Dryer, PHE for Fuel cooler
-
-
-
(c) Acoustic Room Treatment as per site requirement. (i) Wall Insulation, Ceiling Insulation as per design approved (ii) Hot Air attenuators with all supports frames (iii) Rain protection fins for attenuators ( with out stuffing) (iv) Acoustically Treated Foldable Door, Air Filter - Fresh Air, Acoustic Window, (v) Exhaust Air fan of minimum 6000 CFM approx
(d) Exhaust System as per site requirement. (i) As per design approved 'B' class pipe, Exhaust pipe thermal insulation and cladding as per site requirement (ii) Installation of Silencer & Silencer thermal insulation and cladding (iii) Exhaust Pipe Supports, AHU Support & Muffler supports (iv) Crankcase ventilation with MS class B pipe & cooling water line as per site requirement (v) SS Bellows of suitable size with matching flanges, gaskets and fasteners (vi) Ventilation duct, circular shape of suitable dia with MS Supports (vii) Aviation & Lightening arrestor standard type considered.
(e) Fuel System as per site requirement. as per site requirement. (i) Suitable dia ball valve ( as per approved design ball valve stainless body to ASTM A 351 gr CF8M & stainless steel ball to AISI 316 PTFE Seats and Seals Flanged ends to class not less than 150, Regular Port. (ii) Suitable size MS B Class Pipe Line (ERW) (iii) 7.5 KI Day Tank with 6 mm thick with level switch (iv) MS Support Material for Diesel Tank & Pipe line
(f) Starting Air System as per site requirement. (i) Suitable Pressure Gauge as per designed Range 0 - 7 Kg / cm2, 100mm dial glycerin filled, not less than 4 inch Dial ( Including all accessories) (ii) Suitable size MS B Class Pipe Line (ERW), Ball Valve & MS Support Material for Diesel Tank & Pipe Line
-
-
-
(g) Cooling System as per site requirement. (i) Suitable Pressure Gauge ( Range 0 - 7 Kg/cm2, 100 mm dial Glycerine filled, 4 inch Dial ( Including all accessories). (ii) Temperature Gauge. (iii) Piping Class B of suitable size as per designed for LT Circuit, HT Circuit, Cooling water Circuit, Make - up line,Vent line. (iv) Butterfly valve for LT coolant circuit of suitable size as per designed (Cast iron aquaseal butterfly valve, integrally mounted Nitrile rubber lining, cast iron nylon coated disc, flangeless design can be fitted in between flanges drilled to label 'D', 'E', 'F' class 125 / 150, PN 10 rating, with flow control lever.) (v) Butterfly valve for HT coolant circuit suitable size as per designed (Cast iron aquaseal butterfly valve, integrally mounted Nitrile rubber lining, cast iron nylon coated disc, flangeless design can be fitted in between flanges drilled to label 'D', 'E', 'F' class 125 / 150, PN 10 rating, with flow control lever.) (vi) Butterfly valve for Raw Water circuit suitable size as per designed ( Cast iron aquaseal butterfly valve, integrally mounted Nitrile rubber lining, cast iron nylon coated disc, flangeless design can be fitted in between flanges drilled to label 'D', 'E', 'F' class 125 / 150, PN 10 rating, with flow control lever.) (vii) Suitable size as per designed Gate valves, Hoses. (viii) Rubber Bellow suitable size as per designed For LT Circuit, HT Circuit, Cooling Tower Circuit. (ix) Suitable size as per designed Ball valve ( Three piece design). (x) Expansion tank for LT Circuit,HT Circuit. (ix) suitable size as per designed NRVs ( Non Return Valve) as per site requirement. (x) MS Support structures for pipe line.
-
-
-
Supply Installation, testing commissioning of 11 KV HT , 25 kA , VCB line up 09 (Nine) panels switchboard consisting of 630 Amps, VCB 11 KV - 03 Nos as incomer, 02 Nos Bus coupler cum Bus Riser 630 Amp VCB 11 KV, 03 Nos as out going and 01 No 630 Amp VCB for Auxiliary Transformer. VCB panel indoor type totally enclosed, free standing floor mounting type, compartment based withtruck mounted vacuum circuit breaker motor operated spring type electrically and manually charged operating mechanism suitable for horizontal isolation , horizontal draw out type VCBs with copper busbars, self supported insulated busbar with full voltage rated should be used. The switchgear panel shall be of sheet steel construction with Aluminium Zinc not less than 2.5 mm thickness for load bearing section and not less than 2 mm thickness for non load bearing secxtions and shall tottaly dust and vermin proof. The VCB panel confirming as per IEC 62271-100/200 standards and IP 4X class of protection comprising necessary bus bars extension and connections , synchronizing of panel and following protective and contro devices as specified below. Circuit breaker shall be suitable for E2, M2, C2 duty. Vaccum interrupters of the circuit breaker shall also be the manufacturers of the Vaccum interupter, relay, Panels shall have buiilt infeature of condition, Thermal, Environmental & circuit breaker monitoring along with HMI as per specifications. The switchgear and control gear panels shall be of fully arc proof arc proof for 1 sec. Make : Schneider / ABB / BHEL / Siemens / CG
1
-
-
NOTE: (1) The details of VCBs are as under :- (a) 11 KV630 A Incomer Panel - 03 Nos 11kV , 630 Amp, 25 kA incoming VCB consisting of :- (i) 630 Amp Continuous high conductivity electrolytic copper bus bar, Raychem insulated for full voltage, phase identification made at the end by colored tape, bus bar shall be mounted on integral seal off bushing and interconnection with electrolytic grade copper with joint silver plated. (ii) Circuit Breaker shall be mounted on a withdrawable truck which shall be roll out horizontally from service position to isolated position with ease and made of Schneider/ABB/Simens/BHEL. (iii) Motorised spring Charged Mechanism (iv) Cast Resin current Transformer, 11 KV, with suitable dual core CT-3 Nos (v) Cast resing Three phase potential Transformer 11 KV/1.732/110V/1.732, 100 VA, CI 05-03 Nos with desired capacity PT Fuses. (vi) Accessories like local remote selector switch, breaker control switch (YNC), space Heater with Thermostat, DC & AC Control Ckt through MCB, Indicating LED lamps for RYB phases, Spring charged, DC supply Healthy, Breaker ON/OFF, Breaker in service, Test, disconnected position. (vii) Multifunctional meter digital type (Displaying A,V, PF, Hz, KVA, KW, KVAR,KWH, KVARH, etc. class 0.5 with RS 485 port for communication in IEC 61850 Make : L&T/Schneider., Load hours, ON hours and interruptions, with OLD register, %of THD for current and voltage, K factor, High Low values of VLL, A, Hz, W, VA, VAr, PF . nural current display, % of unbalances V&A for all phases. Accuracy class : 0.2 Display : LED/LCD mounting : Flush - 01 Nos (viii) 1 Nos of SCADA compatible feeder protection relay + Auto reclosing features+ Voltage + directional + frequency 51, 50, 51 N , 95, 49, 46, 50BF, 79,32,27,59, 59N, 81 O/U, 86 RS 485, Rs 232, fault record, event record, disturbance record on IEC 61850 protocol. MAKE: EASERGY P3U30 of Schneider or eqv makes of ABB/Simens/CG.
-
-
-
(ix) High speed Master Trip Relay - 01 No Schneider/ABB/ALSTOM/Siemens/CG)
(x) Trip Circuit supervision Relay - 01 No Schneider/ABB/ALSTOM/Siemens/CG
(xi) PT Fuse Failure Relay - 01 Nos Schneider/ABB/ALSTOM/Siemens/CG
(xii) Anti pumping Relay - 01 set Schneider/ ABB/ALSTOM/Siemens/CG
(xiii) Air insulated rear end Bottom entry cable box suitable for termination of XLPE cables (xiv) Panel must have additional features
(xv) Continuous rated closing/tripping coils
(xvi) Spring charging handle
(xvii) Manual closing/tripping of the CB with compartment door closed
(xiv) Short time rating for 3 seconds as per IEC 62271-100
(xv) Mechanical endurance test - E2, M-2 & C2
(xvi) Fully internal Arc tested for for 25 kA for 01 sec
(xvii) The switchgear shall be have temperature measurement sensors at all critical points Medium voltage cable connection & Busbar joints / connections. The system shall help operator during local investigation and local monitoring. This HMI shall give access to the condition monitoring. This HMI shall give access to the condition monitoring data and alarms, while operate is inside the MV electrical room. HMI Make: Schneider/ABB/ALSTOM/Siemens/CG
(xviii) Breaker shall be provided with following features: (a) Auxiliary switch 6NO + 6 NC contacts mounted on the draw out portion of the switch gear. (b)Position cell switch with 03 NO + 1 NC contact each for test position and service position
-
-
-
(b) 11 KV 630 A Bus Coupler Panel 02 Nos Bus coupler 11 KV , 630 Amp, 25kA for confirming to the IEC 62271-200. and all acessories as incomer VCB.
(c) 11 KV 630 A Outoing Feeder- 03 Nos 11 KV, 630 Amp, 25 kA 3 Sec HT VCB 25kA for confirming to the IEC 62271-200. and all acessories as incomer VCB.for outgoing (d) 11 KV 630 Amp for AuxiliaryTransformer Feeder- 01 Nos 11 KV, 630 Amp, 25 kA 3 Sec HT VCB for outgoing to the IEC 62271 - 200 of different current ratings as specified all acessories as incomer VCB. (e) Neutral Isolating switch with NGR Panel 63.5 Ohm 100 A NGR (f) Relay Metering with MICOM P343 Relay and one stand by earth fault relay with Auto Sync and auto load sharing. (g) Synchronizing Panel with Grid & Manual Sync. (h) Auxilliary MCC Panel with Al Bus Bar. (j) PLC with SCADA for DG system for monitoring only. (k) Battery charger 50A Float cum Boost changer. (l) 40 KVA UPS APC Make with Battery. (m) Lead Acid Battery 2 X 12 V DC 200 AH.
-
-
-
NOTE (2) :-All Relays shall be be microprocessor based numerical relay communicable type in line with IEC 61850 protocol and RS-485 port comprisingof three over current, one earth fault protection relay with high set for both phase & earth and with fault memory equivalent , universal auxiliary supply, master trip relay, trip circuit supervision relay, digital multifunction meter with RS-485 port with 0.5 with 3 Nos copper wound double ratio double core current Transformer having CT ratio 100-50/5-5A for outgoings, PT, MFM 0.2 class, power pack complete all as specified and as directed. Note:- For transformer outgoing differential relay & Annunciator 12 window shall be considered. The switch gear shall be have temerature measurement sensors at all critical points medium voltage cable connection & busbar joints/ connections. The system shall help operator during local investigation and local mnitoring . This HMI shall give access to the condition monitoring. ThisHMI shall give access to condition monitoring data and alarms. while operate is inside the MV electrical room, HMI .: Make : Schneider / ABB / BHEL / Siemens / CG
-
-
-
Supply laying & testing HT cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty)with stranded aluminum conductor, 11000 volts grade, of size 3 core 300 sq mm complete all as specified and as directed by Engr-in-Charge
175
-
-
All as per item No. 8.04 above but 3 core 95 sqmm
70
-
-
M&L for end termination kit suitable for 3 core 300sqmm XLPE cable
12
-
-
All as per item No. 8.06 above but suitable for 3 core 95 sqmm LPE cable
12
-
-
Supply, laying and testing of 4 Core X 10 Sq. mm Armoured copper cable pvc insulted LT power cable
1100
-
-
All as per item No 8.08 but 4 Core X 16 Sq. mm armoured copper cable pvc insulted LT power cable
1150
-
-
All as per item No 8.08 but 4 Core X 2.5 Sq. mm armoured copper Shielded cable
3450
-
-
All as per item No 8.08 but 4 Core X 1.5 Sq. mm armoured copper shielded cable
860
-
-
All as per item No 8.08 but 12 Core X 2.5 Sqmm armoured copper cable for common fault signal, start, stop, Estop from DG Set to Breaker panel
475
-
-
All as per item No 8.08 but 27 Core X 2.5 Sq. mm armoured copper shielded cable RTD & BTD
150
-
-
All as per item No 8.08 but 4C X 4 Sq. mm armoured copper shielded cable from Battery charger to Battery
1250
-
-
All as per item No 8.08 but 3C X 2.5 Sq. mm Armoured copper Shielded cable pvc insulted for MODBUS Communication
820
-
-
M&L for end termination kit suitable for suitable for 4 core 10 armoured copper cable pvc insulted
50
-
-
All as per per item No. 8.16 here in before but 4 Core X 16 Sq. mm Armoured copper cable pvc insulted
60
-
-
All as per per item No. 8.16 here in before but 4 Core X 2.5 Sq. mm Armoured copper Shielded cable
205
-
-
All as per per item No. 8.16 here in before but 4 Core X 1.5 Sq. mm Armoured copper Shielded cable
65
-
-
All as per per item No. 8.16 here in before but 12 Core X 2.5 Sqmm Armoured copper Shielded cable
32
-
-
All as per per item No. 8.16 here in before but 27 Core X 2.5 Sqmm Armoured copper Shielded cable
6
-
-
All as per per item No. 8.16 here in before but 4 Core X 4 Sqmm Armoured copper Shielded cable
45
-
-
All as per per item No. 8.16 here in before but 3 Core X 2.5 Sqmm Armoured copper Shielded cable
64
-
-
M & L for Earthing complete with Copper earth plate electrode 600X600x3.05mm thick electrode and 50x6 mm copper strip as earth lead, buried directly in ground(earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level and earth plate to be connected by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specifeid and directed by Engr-in-charge.
10
-
-
M & L for Earthing complete with Copper earth plate electrode 600X600x3.05mm thick electrode and 50x6 mm copper strip as earth lead, buried directly in ground(earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level and earth plate to be connected by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specifeid and directed by Engr-in-charge.
10
-
-
M & L for Earthing complete with GI steel earth plate electrode 600X600x3.05mm thick electrode and 25x3 mm galvanised strip as earth lead, buried directly in ground(earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level and earth plate to be connected by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specifeid and directed by Engr-in-charge.
10
-
-
S&F for earth continuity conductor of size 75x6mm GI strip for control panel & DG body
560
-
-
All as per item No. 8.27 here in before but 50x6 mm copper strip for neutral for DG
290
-
-
All as per item No. 8.27 here in before but 25 X 3 mm GI strip for neutral for DG
250
-
-
All as per item No. 8.27 here in before but 25 X 3 mm copper strip for neutral for lightening arrestor.
200
-
-
S&F 8 SWG copper wire to support electric cables and as directed by engineer in charge.
100
-
-
M&L for clamps, screws, MS angle iron Support for cable Neutral Strip, cable trays and panel, etc all as specified and as directed.
3000
-
-
M&L for factory made perforated galvanised Cable Trays of size 1000 X 100 X 2 mm complete including all necessary fittings.
50
-
-
All as per item No. 8.33 here-in-before but of size 300 X 100 X 2 mm
70
-
-
All as per item No. 8.33 here-in-before but of size 450 X 100 X 2 mm, Ladder type
20
-
-
All as per item No. 8.33 here-in-before but of size 300 X 100 X 2 mm, Ladder type
80
-
-
All as per item No. 8.33 here-in-before but of size 150 X 100 X 2 mm.
160
-
-
S&F Sand bucket with stand (2 Nos)
2
-
-
S&F Dry Chemical powder fire Extinguisher -5Kg
3
-
-
S&F CO2 Fire Extingusher 4.5 Kgs
3
-
-
S&F Rubber mats, First Aid box, Shock treatment chart & danger board
3
-
-
Manning & Operation of EDG for Two Years by using 04 operators including necessary material for servicing as per manufacturer recommendation complete
3
-
-
SUB TOTAL OF SCHEDULE "A" Part - VIII
-
-
-
SCHEDULE "A" PART - IX [AIR CONDITIONING]
-
-
-
Desing, Supply, installation, testing and commissioning of latest technology based Water cooled screw chiller type central A/C plant complete with all equipments and accessories of nominal capacity 3 x 75 TR each (Two Nos, working and one no as standby) complete including all accessories and SCADA system for AC Plant all as specified and directed :- (A) CHILLER UNIT : Micro processor controlled, factory assembled and factory tested Air cooled Chiller comprising of semi hermetic screw compressor (either single compressor or multiple compressor with independent refrigerant circuit) using R-134a Refrigerant driven by induction motor 3 ph 415V suitable for min 75 TR refrigeration capacity, air cooled condenser and flooded cooler with electronic expansion valve complete with inbuilt control panel having microprocessor based control for operation of compressor, condenser, chiller having features of auto operation, min run time equalization, auto restart after power failure, built in time delay, fault diagnostic etc, complete with suitable capacity contractors duly pre wired and inter connected - 03 Nos
1
-
-
(B) Condenser water circulation system : Compresing following :-
(i) FRP induced draft cooling tower two in Nos of 50% capacity of above working plant capacity, complete installed on suitable RCC staging including PCC flooring in around the staging with spray section, honey comp fill basin, fan, TEFC Motor, intake bird screen and other accessories (as per manufacturers tech specifications ) -02 Nos (Both will be working same time.
(ii) PVC/HDPE make up water tank of 2 x 5000 ltr capacity installed/placed on PCC/Brick staging/RCC of suitable load carrying capcity platform for makeup water requirement including brass flat valve with polyethylene ball, over flow and drain arrangement incoming connection of GI pipe 25 mm dia medium grade from tank to tapping point - 01 Job.
(iii) End suction type 3 phase electric pump set of 100% capacity and discharge as per AC plant capacity and FASD starter for re-circulation along with rubber vibration isolation pads (one number working and one No will act as standby). Necessary pressure gauge on discharge and suction of pump shll be provided at the outlet of each pump - 02 Nos (1 No will be standby).
(iv) Condenser water piping of GI medium grade (ISI markied), pipe and fittings for interconnectiong the cooling tower with condensers and pumps, make up water tank, drain pipe, complete with Y strainer, NRVs and butterfly valves - 01 Job.
(v) Non chemical type on line scale preventer of size as sper the capacity of the condenser water pump flow - 02 Nos
-
-
-
(C) Chilled water circultion system : Comprising of the following :-
(i) End suction type 3 phase electric pumping set of 100% capacity discharge as per the capacity of plant working of 415 V AC for recirculation of chilled water with ribbed rubber vibration isolation pads. (One No working and one No will act as standby) Necessary pressure gauges on discharge of pump shall be provided at the outlet of each pump - 02 Nos ( 01 Nos will be standby)
(ii) Chilled water piping with MS heavy grade class ''C" ERW pipe of suitable diameter including all sealdable fittings including two coats of synthetic enamel paint over a coat of red oxide primer on both inside and outside as directed, butterfly valve, NRVs for chiller chilled water pumps with AHUs and fan coil units. Chilled water pipe lines shall be insulated with 50 mm thick EPS (Expanded polystyrene) pipe section wire mesh and cladded with Aluminium sheet 26 SWG, including water flow switches and electrically operated modulating valve at each AHU - 03 Nos. Note : Thickness of insulation will be 50 mm upto pipe size 150 mm dia and 75 mm thick if pipe dia is more than 150 mm.
(iii) Expansion tank shall be of HDPE, white and retangular type of capacity 2000 litres and necessary piping, control valves on inlets and wash out, float valve etc - 01 Job Make of HDPE tank : Sintex/polycon/Rotex/Polywell
-
-
-
(d) Air Treatment System: Compresing the follwing :-
(i) Air Handling unit (AHU), Double skin construction air handling unit suitable for chilled water system made out of extruded aluminum structural frame/aluminum corner and intermediate connecting pieces and panels of 0.6 m, galvanized steel sheet on both sides with 25 mm thick pressure injecte PUF (Poly Urethene Foam) of density (38 +2 Kg/Cum) using CFC free R-141b blowing agent the panels havescratch free palstisol coating on outer side. The fan section should mounted on anti bibration spring isolators and free from main structure. The fan should be DIDW (Double inlet Double Width) back ward curved centrifugalfan with air discharge up blast., belt driven with TEFC (Totaly enclosed Fan cooling) induction motor of suitable capacity. The coild section consist of 6 row deep coil with min 12 fins/inch duly coated. The filter section consists of prefilter with 10 micron 90% efficiently. The other accessories are view port, limit switch, stainless steel (SS3) drain pan, volume control damer for approx 187.5 TR plant with energy Efficient Motor (EE series) of suitable capacity and specified make and drain pan all as specified - 03 jobs
(ii) BLANK.
(iii) Strip type heater bank of suitable capacity in three banks with necessary copper conductor wiring for banking complete - 03 sets (one set for each AHU)
(iv) Humidistat's and Thermostats in each AHU room.
(v) Three way Mixing valve of required size with actuator and modulating and modulating thermostat control for each AHU - 03 Nos
-
-
-
(vi) Acoustic insulation with 25 mm thick fiber glass rigid boards and finished with RP tissue paper and 28 gauge aluminium perforated sheet upto 5 mt from outlet of the air plenum including air plenum all as specified and directed.
(vii) 5 micron filters shall be provided in a GI sheet plenum for AHUs. The filters shall have efficiency of 99% when tested as per BIS 6540-Part-I and made out of Non woven synthetic/polyester/polypropylene media sandwitched between HDPE mesh on one side for additional coarse filtration and aluminium expanded mesh on the other side for mechanical support. Media is deep pleated, encased and sealed in sturdy GI frame for longer life including rubber gasket of apprx size 600 x 600 x 305 mm
-
-
-
(e) Air Distribution System: Comprising of the following :- Supply and return air ducting made out of commercial grade GI sheet zine coating 120 grade IS 277 and fabricated as per IS-655, but not less than 22 SWG thick, Ducting wherever passing through unconditioned space shall be insulated with resin bonded Fiber Glass Wool 25 mm thick (Density 24 kg/Cum covered with GI chicken wire mesh and cladded with aluminium foil fixed with adhesive tape. Where these ducts are passing through open area, insulated with 50 m thick fiber glass wool density 24 kg/m3, covered with polythene sheet faced Hessian cloth, GI chicken wire mesh and protected with sand cement plaster - 01 Job Note : The contractor should examine the entry of supply air dcut/return duct in Anechoic and integration bay.
(i) GI ducting for supply and return air shall be fabiricated as per SMACNA-1995 standards and all as specified. The layout of ducting should be submitted by the contractor for the approval of the accepting officer duly considering the ground requuirement before execution of the work. (ii) Aluminum anodized double deflection type grills/diffuser complete with MS poweder coated volume control damper for supply ait grill/diffusers and Aluminum powder coated grills fixed bar type without volume control damper for return ait - 10 Job.
(iii) Aluminium poweder coated fresh air grill with MS powder coated volume control damper - 01 Job
(iv) Fire dampers automatic type with flusible link (CBRI certificate) and operated with stainless steel spring made out of 16 SWG GI sheet to be provided in main supply duct interlocked with AHU motor to cut off circulation of air in case of fire for each AHU.
(v) Fresh air damper with GI bowl/fittings and mosquito proof, netting shall be provided for each AHU.
-
-
-
(F) ELECTRICAL DISTRIBUTION SYSTEM: Comprising of the follwing :-
(i) Electrical panel board : Cubical type, floor mounted, vermin proof, dust proof CPRI approved, Indoor type, powder coated with seven tank processswitch board panel made out of MS sheet not less than 16 SWG powder coated paint suitable for operation of 415 volt of 50 Hz AC supply, internally wired with copper conductor wire, comprising of the follwing :-
(aa) Air insulated copper bus bar of adequate size for phase and neutral.
(ab) One digital electronic energy meter of suitable capacity at main incoming.
(ac) Digital type ammeter on every outgoing with necessary Cts and selector switch.
(ad) Digital type Voltmeter with necessary selector switch .
(ae) Phase indication lamps and running status of all motors, synthetic electrical insulating matting 2.5 mm thick for full length of panel, as per IS - 15532
(ii) AHU electrical panel : Separate electrical panel for AHU with suitable incoming and out going MCCB/MCBs for AHU motors, Heaters, Pan humidifiers etc, inclusive of starters copper control wiring. (iii) Cabling : Necessary cable connection from main electrical panel to AHU, cooling tower, chilling machines etc, i.e for all the equipment in plant room, outside and AHU motor, with copper conductor of suitable size laid in trenches or overhead on cable trays duly clamped or alongside the walls on connection to panel (iv) EARTHING : Provision of eathing with GI plate 600 x 600 x 6 mm and GI stip 32 mm x 6 mm all as specified in relevant BIS and as per plate No 5 of SSR part - I of required quantity for Chiller unit, Cooling towers, Pumps, Motors, electrical panels etc.
-
-
-
(G) UNDERDECK INSULATON : AHU rooms shall be provided with under deck insulation to slab. Insulation shall be with 50mm thick Glass wool of density 24 Kg/m3 fixed with GI angle/clamps. The Glass wool shall be enclosed with 12mm thick gypsum Board and secured with suitable screws all as shown as per drawing enclosed.
(H) CIVIL WORK : Comprising of Mansonry foundation for chiller units, pumping sets, and AHU and any other equipment and making opening in the brick wall and making good for ducts, pipes, cables and fresh air intake etc, all inclusive.
(1) Plant room of suitable size and AHU rooms will be provided by the department (the reqd size of the same may please be verified from drawing, in case of any discrepencies should brought to the notice of accepting officer before quoting of the tender) as per drawings enclosed. The unit rate quoted by the tenderer shall be deemed to include for any modifications such as cutting, opening, provision of foundation to plants and equipments as required and making good the disturbed surfaces all as directed by Engr-in-Charge.
(2) All civil works required to install, test and commissioning the equipment like excavation, foundation for equipment, necessary cable ducts with MS chequered covers 10mm thick duly painted and finishing patch work to match the existing specifications including fixing the ducting etc, shall be deemed to be included in the above offer.
(3) All three phase motor shall be provided independent single phasing preventer with phase reversal protection with earting connection.
(4) Manufacturers Technical support after sales service support shall be provided for chiller package units and other eqpt.
(5) Suitable supports for holding the ducts and pipes will be provided by the contractor as specified and directed and shall be deemed to be included in the quoted rate..
(6) Size of earth continuity conductor shall be GI strip of 25 x 4mm for all capacity of motors.
-
-
-
(7) All loads up to 63A shall be controlled by MCB & MCCB for loads above 63A.
(8) 3 Core flat copper conductor of suitable size for Chiller Units, Condenser & Chiller Motors, condenser fans etc, shall deemed to be included in the quoted rate.
(9) Refrigeration control wiring with copper conductor, PVC insulated, unsheathed, multistranded 1100V grade, single core of suitable size drawn in and including PVC conduit of suitable size for interlocking arrangement as per standard practice valve, blower motor, pumps etc, quoted rated is inclusive for this provision.
(10) Perforated GI sheet cable tray 100mm width fixed on angle iron supports grouted in wall for carrying all cables. Quoted rate is inclusive for this provision.
(11) Velocity of air in supply air duct shall not exceed 450m/min (1500 FPM) and velocity at diffuser outlet shall not exceed 150m/min (500FPM)
(12) Necessary drain connection at each AHU room AC Plant room shall be provided by the tenderer.
(13) Any item of work not included in the above details, but is inescapable, technical requirement for the efficient performance and smooth functioning of the plant shall be clearly specified and brought to the notice of accepting officer to modify the same before quoting of tender.
(14) Phase-II Tests of Summer, Monsoon and Winter shall be carried out as specified in the particular specifications.
(15) Electricity for Phase-I and Phase-II testing will be provided free of cost by the department.
(16) COP shall not be less than 5.0.
(17) The Chilled water pumpsets shall have Minimum Flow rate of 2.4 US GPM/TON & 4.0 GPM/TON.
-
-
-
(18) After Completion of Phase-I Test, The plant shall be regularly run by contractor till completion of all the Phase-II tests. Contractor shall deploy adequate qualified technical staff to operate the plant continuously and he shall be liable to carryout all the maintenance required during this period and quoted rate shall be deemed to cater for all the provision.
(19) The contractor shall visit the site, prepare and produce the actual heat load calculations to arrive at the actual capacity of the AC plant and connected accessories.
(20) Cost of providing requisite plant operators for Manning and Operation of the AC plant after successful completion of the work, Phase-II test for 300 shifts (08 hrs each) is deemed to be included in the rate quoted.
(21) The tenderer need to submit the drawings for chiller unit, AHU, electrical panels etc including all major components for approval of the accepting officer before placing the order. The contractor should submit all the supporting calculations as well as OEM recommendations for all the motors, pumps, AHUs, cooling towers, de-humidifier etc to get the desired condition in the specified space.
(22) The inside design conditions required is Temperature 22 C + 2 degree C and Relative Humidity is 55% + 5%
-
-
-
Supply, install, commissioning and testing of Air cooled Package Air conditioner, comprising of Hermetic/ semi -Hermetically sealed Reciprocting or Hermeticlly sealed scroll compressors with microprocessor based control, including copper refrigerant piping, grills and dampers, electrical interconnection between indoor and outdoor units including necessary arrangement for fixing of out door unit, suitable for operation on R-407C/R-0A/Eco friendly as per the latest policy in vague refrigerants and of nominal capacity as shown 5.5 TR including necessary ducting made out of GI sheet of suitable gauge upto 15 Mtr & suitable opening grills on ducting will be deemed to be included in the quoted rate, complete all as specified and directed by Engr-in-charge
3
-
-
Supply, Installed, test & commisssioning of hi wall split unit indoor/outdoor Inverter type complete with cordless remote controll unit and with inbuilt air ioniser and plasma filter for better indoor air quality with minimum 5 star rating of capacity 2.0 TR with eco friendly refrigerant complete all as specificed and directed by Engr-in-Charge.
6
-
-
SUB TOTAL OF SCHEDULE "A" Part - IX
-
-
-
Total in Figures
-
-
-
Quoted Amount in Words
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements