UP State Construction And Infrastructure Development Corporation Limited Tender

Wiring point for plug with 1.5 Sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 Sq. mm FRLSH PVC insuleted multistrand copper conductor cable as earthwire drawn inside the conduit, Modular type switch & socket etc. complete in all respect with Modular Box & Cover plate.

Wiring point for call bell with 1.5 Sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 Sq.mm FRLSH PVC insuleted multistrand copper conductor cable as earthwire drawn inside the conduit. Modular type bell push or 2 pin socket etc. complete in all respect with Modular Box & Cover plate. etc

Wiring point for H.P.M.V. Sodium Vapour lamp with 1.5 Sq.mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 Sq. mm FRLSH PVC insulated multistrand copper conducter cable as earth wire drawn inside the conduit. 15 Amp Modular type switch etc. complete in all respects with Modular Box & Cover plate.

Wiring Invertor point for light / Fan/Plug point with 1.5 mm copper wire.

Supply & wiring of submains with two number 4 sq.mm FRLSH PVC insulated 1100 Volt grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit with one no. 2.5 sq.mm FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit. complete in all respect.

Supply & wiring of submains with two number 6 sq.mm FRLSH PVC insulated 1100 Volt grade multistrand single core copper conductor cable with 25 mm dia heavy duty (2 mm thick) PVC conduit & one no. 4 sq.mm FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire for drawn in conduit. complete in all respect.

Supply & wiring of 4 number 10 sq.mm FRLSH PVC insulated 1100 Volt grade multistrand single core copper conductor cable with heavy duty (2 mm thick) PVC conduit & 2 nos. 6 sq.mm FRLSH PVC insulated copper conductor cable as earth continuity wire for drawn in conduit. complete in all respect.

S/F of 100 Amp four pole change over switch on 40 mm x 40 mm x 6 mm angle iron frame, including the cost of labour, T&P painting & other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.

Supply & Laying of Aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (a)70 sq.mm x 3½ core.

Supply & Laying of 25 mm x 3 mm G.I. Strip from earth electrode directly in the ground as required complete in all respect.

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000 mm, Outer Dia 50 mm, inner Dia 25, terminal Dia 12 mm, outer G.I. pipe of 16 swg and inner G.I. pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25 mm x 3mm G.I. strip upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing.

Supply and errection of factory fabricated and wired metal clad dust and vermin proof floor mounting M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN switch boardcomplete following HRC type heavy TPN fuse and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA, P.F.,KW etc.) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above instulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The TPN shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per directuons of Engineer-in-Charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be cat A & B only. Incoming-200 Amp TPN HRC Type = 1 No. Outgoing-100 AmpTPN HRC Type = 1 Nos. 63 Amp TPN HRC Type = 3 No.

S/F of 6 Amp. To 32 Amp. SPMCB (10 KA) Cat-B

S/F of 63 Amp. DP MCB (10 KA) Cat.-B

S/F of 63 Amp 4 pole MCB - (10KA) Cat-B

S/F of surface/flush mounting 4 ways SPN distribution board without MCB complete in all respect, as directed at site by Engineer in charge. Cat-B

S/F of surface/flush mounting 8 ways SPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineer in charge. Cat-B

S/F of surface/Flush mounting 4 ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. Cat.-B

S/F of sheet steel enclosure surface/Flush mounting fitted with 20 Amp 2 pin and earth metal clad scraping earth plug and socket complete in all respect. as directed at site by Engineer in chardge. Cat-B

S/F of call bell of approved make on polished MDFEG/ Teak ply board including making connections etc. complete in all respect.

S&F danger board fabricated from 10 gauge M.S. sheet as per I.E. Rules.

Erection and testing of ceiling fan and regulator etc. excluding supply of down rod, complete in all respect.

Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts, nuts and washers etc. complete in all respect.

S&F of 16 SWG M.S. drum with luvers duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect.

S&L of 1800 mm x 900 mm x 12 mm thick chequered rubber matting of tested quality.

S&F of Power plug with 20A/250 volt flush type modular switch and 5 pin 20A/250V flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for completion of work.

S/F of hexagonal/Round G.P. fan box of approved make made up 1.0 mm thick ISI Marked G.P. sheet spot welded four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S. bar x 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting along with supply of all material, labour, T&P etc. required for proper completion of work.

Supply & fixing of Electronic fan regulator(Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper copmletion of work to the satisfaction of Engineer in charge of work.

Supply and wiring of submain with two number 1.5 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit with 1 nos. 1.5 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable as earth continuity wire drawn inside the conduite complete in all respect including matching colour wash.

Supply and fixing of LED Tube Light with batten suitable for up to 2 x 22 watt LED tube light fitting including tube On surface complete in all respect. Cat-AAA

Supply & Fixing of LED Street Light fitting having die cast aluminium body and diffuser with driver set suitable for 55 watt to 72 watt. Confirming to IP 66 protection complete in all respect. Cat-AAA

Supply & Fixing of Fan Sheet of Backelite

S/F of LED Bulb14 watt

S/F of Kit Kat Fuse 200 Amp with netual link rag bolt for wooden ply board & all size copper lug for DB & Panel

Supply of ceiling fan 1200 mm ISI MARK with 300 mm down rod ,USHA /BAJAJ /CROMPTOM MAKE,with connection etc complete in all respect

S/F of Light duites exhaust fan 12" dia Bajaj / Usha / Cromption make.

S/F of water tight oblong 10 watt LED bulket luminire with driver set confirming to IP 65 & above protection

Supply & fixing of LED fitting 12 to 18 watt round fitting etc complete in all respect

S&F of Fire extinguisher, ABC Type 6.00 Kg. capacity (ISI marked IS: 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

S&F of fire bucket, round bottom made of G.I. Sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chined and locked, initially filled with fine river sand, water as per directions of Engineer-in-charge.

S&F of shock treatment chart (Prescribed under I.E Rule) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T&P for proper completion of work.

Supply and fixing of LED Tube Light with batten suitable for up to 1 x 22 watt LED tube light fitting including tube On surface complete in all respect. Cat-AAA