West Bengal State Marketing Board Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
West Bengal State Marketing Board - WBSMB Tender
Civil Works Others
Eprocure
Opening Date
7 Jun 2019Closing Date
5 Jul 2019Tender Amount
₹ 2,55,61,622Costs
EMD
₹ 5,11,284Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_WBSMB_227160_1Bid Award Id
ViewTender No
WBSAMB/CEO/5/R1/186/2019-20Tender Authority
West Bengal State Marketing Board ViewPurchaser Address
-Website
http://wbtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earth work in filling in compound, tank, low land,ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete.(Payment will be made on profile measurement before and after the work) (ii) With carried earth arranged by the contractor within a radius exceeding 3 km. but not exceeding 5 km. including the cost of carried earth.
3679.42
1154050
313.65
(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
25.49
13624
534.51
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand
3050.4
982227
322
(II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety In ground floor (a) 1:3:6 proportion
972.66
3300242
3393
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(ii ) Pakur variety ground floor
383.18
2424608
6327.63
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m. (For Building work)
30.09
2086417
69330
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (For Building work)
-
-
-
(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.
8003.89
2625276
328
Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth
76.47
374372
4896
Brick work with 1st class bricks in cement mortar (1:6) (b) In superstructure, ground floor
25.07
128312
5119
Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth
10.98
56788
5172
Brick work with 1st class bricks in cement mortar (1:4) (b) In superstructure, ground floor
9.28
50044
5395
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.
644.26
434230
674
25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface). [Note: - Waterproofing as per item NO 60, polymer based paint as per item 59 (a) of Section (C).
11.73
2380
203
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,Grount floor
-
-
-
(i) (b) With 1:6 cement mortar (b) 20 mm thick plaster
175.53
28260
161
(ii) (c)With 1:4 cement mortar (b) 15 mm thick plaster
30.83
4840
157
(ii) (b)With 1:6 cement mortar (b) 15 mm thick plaster
1995.93
281426
141
(ii) (c)With 1:4 cement mortar (c) 10 mm thick plaster
4763.65
600219
126
Neat cement punning about 1.5mm thick in wall,dado,window sill,floor etc.NOTE:Cement 0.152 cu.m per100 sq.m.
4752.72
161592
34
Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).
Using grey cement (iii) 35 mm. thick
35
12040
344
Supplying, fitting, fixing marble slab/tiles, 15 mm. to 18 mm. thick in dado / wall in 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks applying white cement slurry @ 4.4 kg/ sq.m at the back side of marble & pointing in cement mortar (1:2) (1 cement, 2 marble dust) with admixture of pigment matching the stone shades including polishing all complete as per direction of the Engineer-incharge including cost of materials, labours, scaffolding, staging, curing complete. [White cement, Pigment to be supplied by the Contractor) (iii) Area of each slab/tile exceeding 0.6 sq.m but not excedding 1 sq.m.
1.44
2419
1680
18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick ( & polishing as per direction of Engineer - in -avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]
20.13
20371
1012
Supplying, fitting and fixing 18 mm. to 22 mm. thick kota stone slab in wall, dado in 15 mm thick [avg] cement mortar (1:3) including making suitable arrangement to hold the stone properly by brass / copper hooks including pointing in cement mortar (1:2) (1 cement : 2 marble dust) with admixture of pigments matching the stone shade,including grinding and polishing all complete as per direction of Engineer-in-charge including cost of materials, labour,scaffolding, staging, curing complete. [Using cement slurry for bedding @4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m]
10.28
11822
1150
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative
35.07
25916
739
Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria..i) 66mm x 90mm
37.2
18488
497
Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria. (ii) 66mm x 70mm
24.75
11038
446
(A) Wood work in posts, post plates, rafters,and fixed complete (excluding the cost of bolts, paints, but including the cost of nails,screws etc.) (The quantum should be corrected upto three decimals) (ii) Sal : Local.
0.19
13458
71971
Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles,top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be
7.18
17492
2438
Glazed shutters of doors, windows, fan light,clerestory windows etc. as per design (with ordinary glass of 7.4kg./sq.m. 3mm. Thick) fitted with putty bed and teak wood bead and nails including fitting and fixing shutter in position but excluding the cost of hinges and other fittings. cost of glass, putty, wooded beads etc.will be paid separately. (ii) 35mm thick shutters. (b) Sishu, Gamar, Champ,Badam,Bhola,Mogra, Hallak
1.23
3236
2642
Z-batten shutters of door and window as per design havings tongued and groove-half lap jointed as per direction of the Engineer-in-Charge including fitting and fixing shutter in position, but excluding the cost of hinges and other fittings in ground floor. A) Shutter with 25mm thick planks,19mm thick battens. (iii) Sishu, Gamar, Champ, Badam, Bhola,Morga, Hallak.
3.28
8580
2616
Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (a) 40mm X 6mm, 250mm Length
106
3074
29
Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria. In ground floor.(i) 32 mm thick
13.12
36250
2763
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.
-
-
-
(vii) 100mm. X 50mm. X 1.25mm.
48
2256
47
i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.(c) 300mm long.
4
664
166
Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated (iv) 75 x 63 x 3.2mm.
15
930
62
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed (a) With continuous plate base (Hexagonal / Round rod) (iii) 100 mm grip x 10 mm dia rod.
32
2208
69
Iron socket bolt of approved quality fitted and fixed complete. (c) 150mm long x 10mm dia bolt.
20
1260
63
(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (ii) Grill weighing above 16 Kg./sq.mtr and above
12
117924
9827
i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.
1.12
10987
9828
M.S. structural works in columns, beams etc. with simple rolled
structural members (e.g. joists, angle, channel sections conforming to IS: 226,IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.50x50x6 mm.th angle
1.26
75889
60230
2 (a) Supplying, fitting galvanised 3 ply 12 gauge / 4 points line of barbed wire in fencing (holes already made in the body of the post) or fixed by staples tightening and fixing the wires in taut condition with straining bolts including the cost of cutting and of lapping joints in the wire as necessary but excluding the cost of galvanised staples,straining bolt and binding wire where necessary.
6300
174384
27.68
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)(a) One Coati) Water based interior grade Acrylic Primer
2187.73
67381
30.8
Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification.In Ground floor:(iii) Two coats.
2187.73
107198
49
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes:
-
-
-
(i) 110 mm Dia
30
7530
251
c) Bend 87.5 degree ii) 110 mm. Dia.
12
1920
160
a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
46.99
1362
29
(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
51.99
1975
38
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. Including using of approved putty etc. on the surface, if necessary : b) On steel or other metal surface :(iii) two coat (with any shade except white) With super gloss (hi-gloss) - iv) Two coats (with any shade except white) C.Gate
18.99
1500
79
(a) On timber or plastered surface : With super gloss (hi-gloss) -iv) Two coats (with any shade except white)
51.99
4210
81
Tube-Well
-
-
-
Labour for boring through any type of soil for sinking Tube - Well of required dia with top enlargement by rig boaring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants stagging, force pumping set and making arrangements for water required for boring etc. complete and lowring of pipes, strainer, blind pipes etc. complete.
-
-
-
For depth up to 250 M. for 100 mm. dia tube well with top enlargement of 200 mm. dia. (up to 50 M.)
-
-
-
for first 50 Mtr.
50
50700
1014
for next 50 Mtr.
50
44150
883
for next 50 Mtr.
50
52750
1055
for rest 100 Mtr.
100
109100
1091
Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) PVC Pipes
-
-
-
100 mm dia
150
131100
874
200 mm dia
30
64020
2134
Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications.
-
-
-
(iv) 100 mm dia.
30
39570
1319
Supplying, fitting and fixing in position G.I. pipes of TATA make
2
3020
1510
Supplying, fibre glass reinforced Epoxy resin slotted of 1 mm slot width in 6.1m length of approved make and as per direction of the Engineer - in - Charge
10
16380
1638
Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).
-
-
-
(iv) 50 mm dia
2
4554
2277
Supplying, fitting and fixing of (L) Reducing Socket (mm X mm) 150 X 100
1
443
443
Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch as required.
3
22614
7538
Packing the annular space between the outside of the tube well pipes & st including cost of all materials labour and equipment complete.rainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge
5
10145
2029
Supplying, fitting and fixing Submerssable pump 5 HP. with all accesseries including pallel board and required cable
1
35000
35000
Sanitary Plumbing
-
-
-
Supplying, fitting and fixing in position G.I. pipes of materials,jointing materials ,cutting pipes,making threads,cutting trenches TATA make for underground works with all necessary accessories,specials viz.socket,bend, tee, union, cross, elbow, nipple, short piece etc.including cost of all upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.Payment for painting will be made seperately)
-
-
-
(vi) 50 mm dia. medium quality
250
130000
520
(vii) 65 mm dia. medium quality
150
96750
645
(viii) 80 mm dia. medium quality
100
79800
798
Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).
-
-
-
(ii) 80 mm dia
2
11052
5526
(iii) 65 mm dia
2
7898
3949
(iv) 50 mm dia
3
7086
2362
Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple,longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)
-
-
-
(A) For Exposed Work
-
-
-
b)(ii) 20 mm dia. medium quality
30
4830
161
b)(ii) 25 mm dia. medium quality
80
18640
233
b)(ii) 32 mm dia. medium quality
35
8960
256
Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).
-
-
-
(vi) 32 mm dia
2
2320
1160
Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
5
2695
539
(b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar brand).
5
2465
493
(d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).
2
1630
815
a)Supplying, fitting and fixing chech valve (vertical) G.M. tested to 21 kg per sq. cm.
-
-
-
v) 40 mm
3
2544
848
iii) 25 mm
2
818
409
b)Supplying,fitting and fixing check valve (horizontal) G.M. tested to 21 kg per sq. cm.
-
-
-
(iv) 32 mm
2
2036
1018
v) 40 mm
1
1480
1480
Supplying,fitting and fixing steel reducing bush.
-
-
-
(v) 40 mm X 32 mm
10
590
59
Supply of G.I. union.
-
-
-
(iii) 25 mm
21
2016
96
(iv) 32 mm
17
2380
140
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer
-
-
-
(b) 1000 litre capacity
1
5128
5128
(a) Upto 1st story from G.L.
1
96
96
(a) Upto 1st story from G.L.
2
308
154
Labour for punching hole in plastic water storage tank upto 50 mm dia.
9
171
19
Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets. (ii) 550 mm X 400 mm size
2
2766
1383
Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing). (ii) 530 mm X 410 mm
3
4566
1522
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (ii) 470 mm X 280 mm X 340 mm
3
2835
945
Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (i) 450 mm X 350 mm
1
881
881
Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. (i) 450 mm X 300 mm
2
734
367
A)Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 iii) Single Socketed 1.8 Meter Length
-
-
-
(a) 75 mm
10
2040
204
(b) 110 mm
20
5860
293
B)iii) Door Tee
-
-
-
(a) 75 mm
4
404
101
(b) 110 mm
4
780
195
C) Bend 87.5º
-
-
-
(a) 75 mm
3
183
61
(b) 110 mm
4
480
120
Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials,cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. (B)Under ground (b) 110 mm dia
30
2520
84
Supply of G.I. pipes of TATA make including necessary sockets. (e) 40 mm dia. (ii) Medium quality
24
6984
291
Supplying brass-strainer with brass socket of approved make. (Heavy type) i) 40 mm dia.
3.6
2998
833
Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes,scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.
-
-
-
a) For depth upto 150 metre.
-
-
-
i) 40 mm dia. boring etc.
27
2430
90
Supplying, fitting and fixing popular Maya pump no-6 or similar.
-
-
-
(i) For 40 mm dia. tube well
2
3192
1596
supplying, fitting, fixing and instalation of 1 (one) no HP pump with electification all complete as per instruction of Eng.-in.- charge
1
8000
8000
Constructing inspection pit of inside measurment 600mm x 600mm x upto 600mm (depth) with 250mm thick 1st. class brick work in mortar (1:4) on sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over layer of jhama brick flat soling, 15 mm thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips & necessary reinforcement upto 1% & shuttering including 6mm thick cement plastering (1:4) in all external surfaces of the slab & one 560 mm dia R.C.C. mahole cover approved make supplied, fitted & fixing in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth & removing spoils after work complete in all respect with all costs of labour & materials. ii) With Bazree (N.B Varity)
2
13276
6638
Construction of septic tank of different capacities as per approved drawing with 1st. class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. mahole cover (heavy type) of approved make supplied, fitted & fixed in the 100 mm thick R.C.C. (1:1.5:3) top slab with necessary fittings, 20 mm thick cement plaster (1:4) with neat cement finish to the internal surface & 15 mm thick plaster (1:4) to outside wall upto 200 mm below G.L. floor finished with 25 mm thick grey artifical stone over 100 mm thick R.C.C. (1:1.5:3) bottom slab including supplying, fitting & fixing all necessary specials, fittings, S.W. tees, C.I. foots rest etc. including excavation earth in all sorts of soil, shoring, bailing out & pumping out water as necessary, raming, dressing the bed & refilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foregin materials from the chamber & including constucting attached inspection pit as per approved drawing & connecting all necessary pipes, joints etc. with internal plaster work & artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour & materials. iv) For 50 users b) With Bazree ( N.B. variety )
1
84234
84234
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round & cement brick work (1:4) upto 0.90 metre from the top with 20 mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15 mm thick cement plater (1:4) on outer face from tp of the well upto G.L. & 6 mm thick cement plastering (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of well with brick metal (50 mm to 63 mm size) stone chips with necessary reinforcement & shuttering including one 560 mm dia R.C.C. manhole cover (heavy type) of approved making supplied, fitting & fixed in cover slab with necessary fittings, making necessary arrangements for pipe conections, excavation of well including shoring, dewatering & removing the exess eath from the premises as per direction complete in all repect with all costs of labour & materials. With 250 mm thick dry brick work & 250 mm thick cement brick work (1:6) & 1.00 mm inside dia.
2
31240
15620
Road Works
-
-
-
Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material with Carried earth arranged by the Contractor up to 10 KM of leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 10000 m as per Technical Specification Clause 303.1 for Rural Roads of MORD. (Borrow pit / Pre work post work measurement)
2058.66
645698
313.65
Box cutting or filling in Road embankment in all sorts of soil includinspreading the spoils properly over the flank as necessary or on berm to approximate grade & camber and rolling the sub-grade with power rollerto proper camber and grade as per direction and satisfaction of Engineer-in-charge including uprooting and removing plants and jungles when and where necessary.b) For each additional Depth of 150mm and part thereof.
2809.2
40452
14.4
Construction of granular sub-base by providing graded material, mixing in Wet Mix Plant at OMC, carriage of mixed material to work site,spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory power roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants and cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (ii) Grading – II
421.38
916842
2175.81
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnesin stages to proper grade and camber, applying and brooming requisite type of screening / bindingmaterials to fill up the interstices of coarse aggregate,watering including lighting, guarding, barricading andmaking necessary earthen bundh of one metre width oneach side and preparing the bed bynecessary cutting orfilling, including cost of all materials and hire and labour charges of all men and machinery and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H
(i) Grading-I Aggregate (63 mm to 45 mm) Using
Stone Screening Type A (13.2 mm) B. Manual Means
210.69
726459
3448
iii) Grading-II Aggregate (53 mm to 22.4 mm) Using Stone Screening Type B (11.2 mm) B. Manual Means
210.69
732910
3478.62
Providing and applying primer coat with Cationic Bitumen Emulsion of approved grade conforming to IS:8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface and spraying primer using Mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per Clause 502 ofSpecifications for Road & Bridge Works of MoRT&H.
(i) For WBM / WMM Surface:
(with primer @ 0.70-1.0 kg/sqm)
2809.2
91327
32.51
Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
(ii) On Granular surfaces treated with primer
(Using Bitumen emulsion at the rate of 0.25 to
0.30 kg per sqm.)
2809.2
31828
11.33
Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone aggregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by any suitable arrangements, laying the mixture uniformly over the surface, including line, grade and level to serve as wearing course on a previously prepared base, including mixing in Mobile Hot Mix Plant (Light Duty) and thoroughly rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including the cost and carriage of stone chips and matrix, heating the matrix, preheating the aggregates to required temperature and including the hire charges of Mobile Hot Mix Plant (Light Duty) and other machinery, pay of operators, cost of fuel and lubricants etc. complete to be followed by seal coat of either Type A or Type B as per Technical Specification Clause 508 for Rural Roads of MORD.
2809.2
370786
131.99
Providing and laying Premixed Seal Coat (Type B) with approved quality sand/grit @ 0.6 m3/ 100 m2 and bitumen binder on thoroughly cleaned black top surface coated with tack coat, including heating and mixing cleaned sand/grit (100 % passing through 2.36 mm sieve and retained on 180 micron sieve) uniformly with bitumen binder, laying and spreading the mix at an uniform rate using suitable means, brushing the surface, if necessary, to ensure uniformity, followed by rolling with power roller including the cost and carriage of binder and aggregates, cost of heating the binder and aggregates and all other incidental charges, cost of fuel and lubricants, including hire charges of machineries, tools & plants required for construction and quality control complete as per Clause 511 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). II By Manual Means With Hot Bitumen Binder (@ 6.80 kg / 10 sqm.)
2809.2
128436
45.72
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m. (Road)
6.23
365136
58609.4
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (Road)
-
-
-
(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.
7.54
1545
205
Electrical Works
-
-
-
Meter Room
-
-
-
Supplying and fixing 100A Sheet steel Main Switches on angle iron frame on wall. Make:Havells
1
6250
6250.2
Supply of 4 core 50 Sq.mm PVC/A Al. cable KIT KAT fuse to Main Switch & Main Switch to Main Panel
20
6791
339.57
Laying of cable from 4 core 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting
20
1562
78.1
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured 4 core 50 sqmm
2
433
216.7
Finishing of the 4 core 50 sqmm XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc
2
459
229.9
Main Panel :- S/Installation of wall mounted cubicle type indoor compartmentalized 415V., 50 Hz. dust & moisture proof LT Distribution panel board with following electrical accessories fabricated from 14 SWG CRCA sheet with MS angle frame (Main frame with 50 x 50 x 6mm Angle and each compartment with 40 x 40 x 6mm Angle). The panel should have adequate strength & space to accommodate the incoming & outgoing switches and bus-bars with all interconnection in between the switches and bus-bars with copper flat / flexible wire of suitable capacity. The panel should be provided with cable alley for facilitating connection of all the incoming & outgoing XLPE Cables with termination arrangement by S&F copper terminal stud / bolt of required sizes. There should be earthing attachment in the panel. The panel is to be painted with powder coated paint as per direction of EIC. The panel board should consist with the followings :-
1
87125
87125
(A) INCOMER:-
-
-
-
(a) 415V., 100A., TPN. Main switch with 3 nos 100 Amp. HRC fuses as incommers - 01 Nos. [Havells -M]
-
-
-
(B) BUSBAR CHAMBER:-
-
-
-
S&F 100 Amp capacity electrolytic tinned copper 4 bar bus bar [size of flat 4x(15 mm x 3 mmx)] mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification & all connection made with required size Al bars -1set.
-
-
-
(C) OUTGOING:- a) 415V., 32 A., TPN main switch with 3 nos. 32 Amp. HRC fuses as outgoing [Havells-M] - 7 nos.a) 415V., 63 A., TPN main switch with 3 nos. 63 Amp. HRC fuses as outgoing [Havells-M] - 2 nos.c) 20 Amp DP MCB -3 Nos.(D) METERING:-(a) 500V., C.T. Coil (C.T. Ratio-100/5A.) - 3 Nos. (b) LED Indicator lamp (Siemens) - 3 nos.(c) Panel mounted digital Voltmeter in 96x96 mm² (AE/ HPL) - 1 no.(0-500V)(d) Panel mounted digital Ammeter in 96x96 mm² (AE / HPL) - 1 no.(0-30A).(e) 6A SP MCB for control ckt (Legrand make) - 3 nos.(f) Selector Switch (Kaycee make) - 2 nos.(g) Danger Board - 1 no.
-
-
-
Supplying and fixing double-door 2+4 way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. Incoming 40A DP MCB Isolator & Outgoing 6-32A SP MCB.
2
6949
3474.9
Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required.2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC.Run from DP of mian panel to MACB DB and MCB DB to plug point.
15
1963
130.9
Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. kelite/Perspex (wall matching color) top cover 3mm thick and incl. 175mmx100mmx65mm inspection box,making earthing attachment, painting the MS box andmending good the damages to original finish(Average run 8 mtr)
14
13074
933.9
Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish.On Board
4
294
73.7
Supplying of Havells Make 240V 36 watt Powder coated Regal Batten type luminaire with electronic ballast, suitable for domestic application 230V, 50Hz supply Single tube fittings.Model No Regal Batten T8 Neo.With supplying of 1x36watt T8 Lamp.
4
1544
386.1
Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener
4
440
110
Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting.
2
532
266.2
Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after
making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.
2
519
259.6
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.
1
72
72.6
Supplying of 240 Volt 1400mm AC Ceiling Fan ,Make:Havells,Model No :XP-390
1
2415
2415.6
Supplying of 240Volt 300 mm Turbo force Heavy Duty Exhaust Fan( Make: Havells/ Equivalent)
3
9622
3207.6
Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of diameter.30 cm (12")
2
723
361.9
Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long)30 cm Exhaust fan (12")
2
424
212.3
Supplying & Fixing bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 8watt CFL / 100 watts GLS lamp complete set.
2
1273
636.9
Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required
4
3308
827.2
Excavation of soil for installation of Earth Electrode and filling & ramming For Soft Soil
26
6149
236.5
Earthing with 50mm dia G.I. pipe (ISI-M) 3.64mm thick * 3.04 Mtrs. Long and 1*4 WG wire (4 Mtr. Long) 13mm dia * 80mm long G.I. bolts double washers incl. S&F dia pipe protection (1Mtr long) to be filled with bitumen partly under the G.L. and partly above G.L. driven to an average depth of 3.65Mtrs .below the G.L. and restoring the surface duly remmed
13
21793
1676.4
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe
13
13084
1006.5
S&F earth busbar of Galv .M.S plat 50mm *6mm on wall having clearance of 6mm from wall incl. providing drilled holes on the busbar complete with G.I bolts , nuts ,washers spacing insulator etc. as required
6.5
1544
237.6
Connecting the equipments to early busbar incl. S&F No. 8 SWG G.I. wire on wall /floor with stapels as per G.S.
130
1287
9.9
Toilet Block
-
-
-
Supplying and fixing 32A Sheet steel Main Switches on flat iron frame on wall
1
3481
3481.5
Supply of 2core 10 Sq.mmPVC/A Al. Cable run from Main Panel to Toilet Block
290
30719
105.93
Laying of one No. 2 core 10 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed
290
51678
178.2
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of 2 core 10 Sq.mm XLPE/PVC armoured cable.
2
253
126.5
Finishing of the 2 core 10 Sq.mm XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to Feeder PillarBox.
2
74
37.4
Fixing only starters (for motor control) on flat iron frame / angle iron frame on wall.On angle iron frame (for higher rating).Direct on Line starter for motor (upto 5 HP)
1
236
236.5
Supplying of Fully Automatic Direct Online (DOL) Motor Starter Make:L&T Cat No: SS9722700B0
1
841
841.5
Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling
6
250
41.8
supply and fixing of Philips make(Model :Essential) 14 Watt 760lm CFLi fixed on above batten holeder,
6
1050
175
Compound Light
-
-
-
Feeder Pillar Box: S & Installation hooded outdoor type single side door and feeder piller box on bricks foundation & to be installed on 18” height from Gr. Level. The piller box will be fabricated from 14SWG thick sheet steel metal. The Size of the panel will be fixed accroding to the specification and details drawing should be approved by the EIC. The panel should have an angle iron leg. Provission for double Locking arrangement. Painting will be made by synthetic enamelled paint after 2 coats of red led primer. The feeder piller box comprising the followings :- (To be installed at the CG of the Load )
5
229595
45919
(A) INCOMER:-(a) 415V., 63A., TPN. Main switch with 3 nos 63 Amp. HRC fuses as incommers - 01 Nos. [Havells -M]
-
-
-
(B) BUSBAR CHAMBER:- S&F 100 Amp capacity 99.9% - 99.5% electrolytic tinned copper 4 bar bus bar [size of flat 4 x 25mm x 5 mm] mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification & all connection made with required size cu bars - 1set.
-
-
-
(C) OUTGOING:- a) 10Amp SP MCB x 10Nos(b) LED Indicator lamp (Siemens) - 03 nos.c) 32 Amp 3pole Power contractor, coil voltage 240V AC,with auxiliary 1 NO and 1 NCd) Digital sychronous Timer, Coil voltage 240volt AC ,e)Necessary connection(f) Danger Board - 01 no.
-
-
-
Supply of 4 core 25 Sq.mmPVC/A Al. cable Meter Room To Feeder Pillar.( Main Panel to Indvidual Feeder Pillar Box.)
720
146124
202.95
Laying of one No. 4 core 25 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed
720
128304
178.2
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of 4 core 25 Sq.mm XLPE/PVC armoured cable.
10
1375
137.5
Finishing of the 4 core 25 Sq.mm XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to Feeder PillarBox.
10
1265
126.5
Supply of 2core 6 Sq.mmPVC/A Al. cable Feeder Pillar to Diifferent Compound light Fitting's Loop Box.(Feeder Panel To Light Fittings)
1332
118681
89.1
Laying of cable upto 2 core 6sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting
932
58436
62.7
Laying of one No. 2 core 6 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed
400
71280
178.2
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of 2core 6 Sq.mm XLPE/PVC armoured cable.
232
17098
73.7
Finishing of the 2 core 6 Sq.mm XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to Feeder PillarBox.
232
8421
36.3
Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint .
116
67245
579.7
Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc
116
116754
1006.5
Supply of Street Light Luminaire Make : HAVELLS or Equivalent 20W 5700K Model No.LHEWEBP7PL6S020
116
267577
2306.7
Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure.
116
79367
684.2
Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required
-
-
-
50 mm dia
180
65340
363
65 mm dia
60
27456
457.6
Pump Room
-
-
-
Panle for Pump:- S/Installation of wall mounted cubicle type indoor compartmentalized 415V., 50 Hz. dust & moisture proof LT Distribution panel board with following electrical accessories fabricated from 14 SWG CRCA sheet with MS angle frame (Main frame with 50 x 50 x 6mm Angle and each compartment with 40 x 40 x 6mm Angle). The panel should have adequate strength & space to accommodate the incoming & outgoing switches and bus-bars with all interconnection in between the switches and bus-bars with copper flat / flexible wire of suitable capacity. The panel should be provided with cable alley for facilitating connection of all the incoming & outgoing XLPE Cables with termination arrangement by S&F copper terminal stud / bolt of required sizes. There should be earthing attachment in the panel. The panel is to be painted with powder coated paint as per direction of EIC. The panel board should consist with the followings :-
1
44086
44086
(A) INCOMER:-
-
-
-
(a) 415V., 63A., TPN. Main switch with 3 nos 63 Amp. HRC fuses as incommers - 01 Nos. [L&T -M]
-
-
-
(B) BUSBAR CHAMBER:-
-
-
-
S&F 100 Amp capacity electrolytic tinned copper 4 bar bus bar [size of flat 4x(20 mm x 3 mmx)] mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification & all connection made with required size Al bars -1set.
-
-
-
(C) OUTGOING:-
-
-
-
a) 415V., 32 A., TPN main switch with 3 nos. 32 Amp. HRC fuses as outgoing [L&T-M] - 2 nos.
-
-
-
b)Submersible pump controler by DOL starter Max motor output at 415V 3ph Max 7.5 H.P [cat no - 2Nos
-
-
-
c) 20 Amp DP MCB -4 Nos
-
-
-
(D) METERING:-
-
-
-
(a) 500V., C.T. Coil (C.T. Ratio-60/5A.) - 3 Nos.
-
-
-
(b) LED Indicator lamp (Siemens) - 3 nos.
-
-
-
(c) Panel mounted digital Voltmeter in 96x96 mm² (AE/ HPL) - 1 no.(0-500V)
-
-
-
(d) Panel mounted digital Ammeter in 96x96 mm² (AE / HPL) - 1 no.(0-30A)
-
-
-
(e) 6A SP MCB for control ckt (Legrand make) - 3 nos.
-
-
-
(f) Selector Switch (Kaycee make) - 2 nos.
-
-
-
(g) Danger Board - 1 no.
-
-
-
Supply of 4 core 10 sqmm Alluminiuam Armoured cable layed from Main Panel room to Pump Room.
60
8494
141.57
Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. Fro\m Main Panel to Pump Room
60
10692
178.2
Supplying and Drawing 1.1 KV 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.19 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire and Different Pllug Point
30
5082
169.4
Supplying and fixing double-door (2+4) way SPN DB with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment along withsSupplying and fixing 4 nos 240 V SPMCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection & supplying and fixing 240V 32A DP Isolator on din rail of existing DBs and necessary connection.(Make Havells)
1
2118
2118.6
Supplying & fixing 240V 63 Amp sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required.Dimension of Al. bars [85mm long]2 x 20x5mm
16
29603
1850.2
Distn. wiring in 22/0.3 (1.5 sqmm) 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish
3
2574
858
Supply of 20W LED tube light fittings Make: Havells /Equivalent Model No: LHESCEP7UNIW 020 with supply of 18watt LED tube 6500K Make: Havells, Model NO LHEXBTP7INIW018
1
1035
1035
Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.
1
218
218.9
Add G.S.T. @ 12%
1
2711900
2711900.14
Add Labour Welfare Cess @ 1%
1
253110
253110.68
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements