Public Works Department Tender
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Public Works Department - PWD Tender
Building Construction
Eprocure
Opening Date
3 Sep 2019Closing Date
24 Sep 2019Tender Amount
₹ 2,25,76,388Costs
EMD
₹ 5,56,617Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_CB_241611_1Bid Award Id
ViewTender No
WBPWD/SS/SE/WC/ NIT_22Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://wbpwd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling points with powdered earth or local sand
1240.97
330098
266
Supplying and laying Polythene Sheet ( 150 gm. / sq.m) over damp proof course or bellow flooring or roof terracing or in foundation or in foundation trenches
1246.61
29918
24
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.Pakur variety
5
22541
4508.33
(I) Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor
(A) [Pakur Variety].
109
461389
4232.93
Controlled Cement concrete with well graded stone chips (20 mm nominal size)excluding shuttering and reinforcement with complete design of concrete as per IS:456 and relevant special publications,submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge.Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture].
(b) M 25 Grade.
(i) Pakur Variety.
(This is a substitute item in place of M20 grade concrete - Vide tender item no: 9)Ground floor.
450
2491389
5536.42
First floor.
260
1464169
5631.42
2 nd floor
40
229056
5726.42
Hire and labour charges for shuttering with centering and necessary staging Upto 4 m. using approved stout props and thick hard wood planks of approved planks of approved thickness with required bracing for concrete slab , beams columns, lintels curved or straight including fitting fixing and striking out after completion of works.(f) 25 mm to 30 mm shuttering without staging in foundation
446.22
91475
205
C) 9 mm to 12 mm thick approved qualitY.
A) Ground Floor
2052.21
744952
363
B) 1 st floor.
1655.69
630817
381
C) 2 nd floor.
251.86
100492
399
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor / upto 4m. (i) Tor steel/Mild steel JSW/JSPL/SHYAM/
SRMB/BMASL/ELECROSTEEL/SSLGround floor.
60
4018857
66980.95
First floor.
34
2291972
67410.95
Second floor
5.5
373125
67840.95
Brick work with 1st class bricks in cement mortar (6:1) . a) In foundation and plinth.
35.87
152195
4242.98
b) In superstructure :- 1) Ground Floor.
98.48
439809
4465.98
2) First Floor
100.64
460627
4576.98
3 ) 2 nd floor.
96.8
453796
4687.98
125 mm thick brick work with 1st class. Bricks in cement mortar (1:4) in ground floor.
1) Ground Floor.
324.96
192376
592
2) !st Floor
361.68
218454
604
(b) 75 mm thick brick work with 1st class. Bricks set in cementsand mortar (1:4) in ground floor including H.B.Netting in every alternate layers. Ground floor.
20.49
8523
416
2) 1 st floor.
20.49
8769
428
Extra for using approved H.B. netting in every third layer in any floor.
686.64
28152
41
Labour for Chipping of concrete surface before taking up plastering work.
1672.81
35129
21
Plaster (to wall floor ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating nosing and drip course,scaffolding/staging where necessary (Ground floor) [Excluding cost of chipping over concrete surface] (a) With 1:6 cement mortar 20 mm thick plaster.Ground floor.
1346.61
206031
153
1 st floor.
1372.35
215458
157
2 nd floor.
667.14
107409
161
15 mm. thick plaster 1) Gr Floor.
1119.38
151116
135
2) 1 st floor.
1197.22
166413
139
3) 2 nd floor.
339.8
48591
143
(c) with 4:1 cement mortar.10 mm.thick plaster1)Gr Floor.
706.87
86238
122
2) 1 st floor.
706.87
89065
126
3) 2 nd floor.
96.13
12496
130
Neat cement punning about 1.5 mm thick in wall dado window sills floor drain etc. (NOTE: Cement 0.152 cu.m. per 100.sq.m ).
218.64
7433
34
Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).Using grey cement. (ii) 25 mm. thickGround floor.
440.34
108763
247
First floor.
267.15
66975
250.71
Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tilesusing cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,
labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in- Charge.(White cement, synthetic adhesive and grout material to be supplied by the contra conc (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint fillingwith pigment (A) Deep Colour & White In ground floor
305
512095
1679
In first floor.
300
505200
1684
Supplying, fitting & fixing Marble slab / tile of 15 to 18 mm thickness in floor, lobby, stair etc. over 20 mm. (av) thick base of cement mortar (2:1) or lime mortar (2:1) laid and jointed with cement slurry with necessary pigments includingig grinding and polishing as per direction of Engineering - in - Charge. (a) With Makrana white / Makrana plain pink / Adranga pink / Garbh Gulabi / Udaypur pink / Udaypur Green / Black Bhaslana (ii) Area of each tile exceeding 0.3 sq.m. but not exceeding 0.6 sq.m. Ground floor.
102.88
172015
1672
First floor.
112.14
188843
1684
Supplying, fitting, fixing marble slab / tiles, 15 mm. to 18 mm. thick in dado / wall with cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 cement, 2 stone dust) with admixture of pigment matching the stone shades including polishing all complete as per direction of the Engineer-in-charge including cost of materials, labours, scaffolding, staging, curing complete. (a) With Makrana white / Makrana plain pink / Adranga pink / Garbh Gulabi / Udaypur pink / Udaypur Green / Black Bhaslana(ii) Area of each slab/ tile upto 0.3 sq.m. Ground floor.
16.06
25133
1565
First floor.
16.62
26209
1577
Supplying fitting and fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 no's of key stones (10 mm) fixed with araldite at the back of each tile and finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of
concrete surface, if necessary or by synthetic adhesive & grout materials etc. B) Wall, with Polymerised Adhesive and Epoxy grout pointing including spacer 2 mm (when Tiles are laid over existing heard ready surface) . a ) area of each tile up to 0.09 sqm using Adhesive 3mm thick ) other than Coloured decorative (any shade including white) Ground floor.
270.66
205160
758
2) 1st Floor
235.62
179778
763
Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings.
(a) 35 mm thick shutters (single leaf). Ground floor.
28.8
76579
2659
First floor.
30.48
81473
2673
M.S. clamp for fixing door and window frame made of flat bent bar, end bifurcated, fixed in cement concrete with stone chips (4:2:1) fitted and fixed complete as per direction. (a) 40mm. X 6mm. Above 250mm. Length.
306
8874
29
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. vi) 100mm. X 50mm. X1.250mm.
207
8901
43
ii) Godrej Hydraulic door closer fitted and fixed complete. (b) Medium type
53
88245
1665
(a) Supplying 'Godrej' mortice lock chromium plated with latch and keys 4 levers,including fitting and fixing complete.
106
114586
1081
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (a) With continuous plate base (Hexagonal/ Round rod)(vi) 150 mm grip x 10 mm dia rod.
52
5044
97
Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria.. i) 66mm X 90 mm.
96.3
47861
497
Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria. Standard Size : 2050mm x 905/670mm(i) 32mm thickGround floor.
16.92
46749
2763
First floor.
14.76
40988
2777
M.S or W.I. ornamental grill of approved design joints continuously welded with M.S W.I flats and bars for windows,railing etc. fitted and fixed with necessary screws and lugs.(i) Grill weighing above 10 kg./sq.m. Upto 16 kg./sq.m. 1) Ground Floor. in ground floor.
8.41
83158
9888
2) 1st Floor
9.93
99169
9986.88
Collapsible gate with 40 mm x 40 mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100 mm apart in fully stretched position 20mm x 5mm M.S flats as collapsible bracing properly revetedand washered including 38 mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floor etc. and making good
damages complete. Ground floor.
21.6
93528
4330
First floor.
8.64
37785
4373.3
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. ii) 4mm thick coloured / tinted / smoke glass.
150.82
70583
468
Supplying heavy duty hydraulic double action floor spring along with top pin/set of pivots conforming to IS: 6315 or any approved make as per direction of Engineer in charge.
12
20748
1729
Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP)(a) 3mm thick (0.25mm Al.+2.5mm LDPE +0.25mm Al. PVDF coating).
13.68
27236
1991
Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film
Natural white.. For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. and for Top and Side frame @ 0.778 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.
For 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr. and for Top and Side frame @ 1.067 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.[Note : for estimate purpose construction wing may consider weight of 2- track Aluminium window @ 5.5 Kg per Sq.M.and 3-track Aluminium window @ 6.5 Kg per Sq.M]
600
268800
448
Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter( top rail, bottom rail, lock rail, door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium door with door spring,/aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-incharge.( Excluding cost of glass/ panel board, door spring/ Al hinges, door
closer, door stoper, handle, tower bolt and locking arrangment etc) 10-12 Micron thickness Annodizing film
Natural white. (unit wt of to Top & side frame @1.366 kg/m ; top rail @ 1.296 kg/m; bottom rail @ 1.974 kg/m; lock rail @ 1.590 kg/m; door vertical @ 1.412 kg/m; glazing clip @ 0.167 kg/m. ) [Note : for estimate purpose construction wing may consider weight of Aluminium door @ 9.0 Kg per Sq.M]
195
75075
385
(b) Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick).
4166.27
508284
122
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor). one coat
ii) Solvent based interior grade Acrylic Primer
4166.27
140403
3370
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer): (Two coats). i) Standard Quality
4166.27
258308
62
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the Engg-in-charge.(a) One coat. i) Ground floor.
1346.61
42283
3140
ii) 1 st floor.
1372.35
44066
3211
iii) 2 nd floor.
667.14
21895
3282
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. a) Premium 100% Acrylic Emulsioni) Ground floor
1346.61
113115
84
ii) 1 st floor.
1372.35
116251
84.71
iii) 2 nd floor.
667.14
56987
85.42
Priming one coat on steel or other metal surface with synthetic enamel /oil bound primer of approved quality including smoothening surfaces by sand papering etc.
149.97
4349
29
Priming one coat on timber or plastered surface with synthetic enamel /oil bound primer of approved quality including smoothening surfaces by sand papering etc.
128.8
4894
38
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary. B) On steel or other metal surface With super gloss-( higloss) Two coats (With any; shade except white)
149.97
11847
79
A) On timber or plastered surface With super gloss (hi- gloss) Two coats (with any shade except white )
128.8
10432
81
Supplying, fitting and fixing UPVC pipes A - type and fittings conforming to IS 13592-1992 with all necessary clamps nails including making holes in walls, etc. and cutting trenches in any soil, through masonry concrete structure etc. if necessary and mending good damages including jointing with jointing materials ( Spun yarn, valamoid /bitumen / M. seal etc.) complete. A) UPVC Pipes :-(c) 160 mm. Dia.
186.4
46786
251
B) UPVC Fittings:
a) Plain Tee(i) 160 mm. Dia
28
3108
111
d) Shoe
(i) 160 mm. Dia
28
4816
172
Extra rate for adding Polyester Fibre anti shrinkage material @ 0.25% by weight of cement [or as per Manufacturer's Specification] as secondary reinforcement to arrest hair crack in concrete including cost of Fibre.
49
20286
414
(a) Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification [Cement to be supplied by the Department].
599.48
52754
88
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. Pakur variety
142
721368
5080.06
Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof.
11.55
5162
447
Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars.(a) In ground floor including roof.
0.44
860
1956
Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from roof or wall after unscrewing bolts, nuts, screws etc.and stacking the material at site as directed. (Payment to be made on measurement of portion of roof or wall removed.)
40
1640
41
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement morter (1 : 4) including two 560 mm dia.R.C.C manhole cover thick (1:1.5:3) top slab with necessary…..water proofing compound @0.5% by weight of cement with all costs of labour and materials. (iv) for 30 usersi) With Pakur variety (JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL).
2
111074
55537
Construction of circular soak well 2.5 metre deep in all types of sandy soils withdry brick work……with 250 mm thick dry brick work and 250 mm thick cement brick work(6:1) and 1.00 m inside dia.i)with pakur variety.JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL).
2
27816
13908
Constructing Inspection pit of inside measurement 600 mm X600mm X upto 600mm (depth) with 250 mm thick 1st class brick work in cement morter (1 :4) on all sides, bottom ….... after work complete in all respect with all costs of labour and materials i) Pakur variety.(JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL).
6
36966
6161
Supplying, fitting and fixing 10 litre P.V.C low down cistern conforming to I.S. specification with P.V.C fittings complete, C.I. brackete including two coats of painting to bracket etc.
20
20300
1015
Supplying fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm x 75 mm wooden blocks, C.P. weast fittings 32 mm mm dia. One approved quality brass C.P.piller cock of 155 mm dia.C.P.chain with rubber plug of 30 mm dia., approved quality P.V.C waste pipe withC.P.nut 32 mm dia. 900 mm long approved quality P.V.C connection pipe with heavy brass C.P. nut including mending good damages and painting the brackets with two coats of approved paint.... 550 mm x 400 mm size.
20
44160
2208
Supplying, fitting and fixing pedestal of approved make for wash basin
20
29940
1497
Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing).
(i) 580 mm X 440 mm.
12
19356
1613
Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts,nuts etc.(a) With 'P' trap (with vent).
6
18624
3104
Supplying P.V.C water storage tank of approved quality with with closed top with lid (Black) - Multilayer (b) 1000 litre capacity.
5
25640
5128
Labour for hoisting plastic water storage tank. (i) Upto 1500 litre capacity. A)Upto 2nd storied from G.L.
5
695
139
Labour for punching hole in plastic water storage tank upto 50 mm dia.
20
380
19
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (ii) 470 mm X 280 mm X 340 mm
8
7560
945
Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. i) Polythene Flush Pipe.
12
1860
155
Supplying,fitting and fixing approved brand P.V.C. connector white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia (iii) 600 mm long.
10
1070
107
Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union,cross, elbo, nipple,longscrew, reducing socket, reducing tee,short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointingmaterials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately). (A) For Exposed Work d) (ii)32mm dia medium quality.
43.2
15336
355
(ii) 25 mm dia. medium quality
111
33855
305
(ii) 15 mm dia. medium quality
124
23808
192
Supplying, fitting and fixing in position G.I.pipes of TATA make for underground works with all necessary accessories,specials viz.socket, bend, tee, union, cross, elbow, nipple, short piece etc.including cost of all materials,jointing materials ,cutting pipes,making threads,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.Payment for painting will be made seperately)
(iv) 32 mm dia. medium quality
36
12744
354
Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
40
21560
539
(b) (i) Chromium plated Stop Cock (Equivalent to Code No.513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCOor similar brand).
40
19720
493
Supplying, fitting and fixing shower of approved brand and make.(a) (i)Chromium plated round shower with revolving joint 100mm dia with rubid cleaning system (Equivalent to Code No.542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand).
8
3616
452
Supplying, fitting and fixing towel rail with two brackets.(b) Aluminium (i) 25 mm dia. and 600 mm long.
12
1968
164
Supplying,fitting and fixing cast iron 'P' or 'S' trap conformimg to I.S. 3989 / 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately). (A) 'P' Trap. (iii) 100 mm
12
11376
948
Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989 / 1970 and I.S. 1729/1964 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary ointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the center line of the total pipe line in fitted condition including pecials,payment for specials & Painting will be paid seperately). (a) With valamoid joints including sealing with sand cement morter (4:1) upto quarter depth. (ii) 100 mm dia. (internal).
73.8
50774
688
Supplying, fitting & fixing Cast iron single branch equal with doorconforming to I.S. 1729/1970 including joining and painting two coats to the exposed surface with approved paint complete.
(Payment of Painting will however be paid seperately). (a) With valamoid joints including sealing the top with cement mortar (4:1) (ii) 100 mm dia. each.
10
7940
794
Supplying, fitting & fixing Cast iron double branch equal with door conforming to I.S. 1729/1970 including jointing and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will be paid seperately).
(a) With valamoid joints including sealing the top with cement mortar (4:1) (ii) 100 mm dia.
10
9160
916
Supplying, fitting & fixing H.C.I. bend with door conforming to I.S.S. including jointing complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will be paid seperately).(a) With valamoid joints including sealing the top with cement mortar (4:1) (ii) 100 mm dia.
10
5430
543
Supplying, fitting & fixing approved patent vent cowl I.C.I.conforming to I.S.S and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will be paid seperately).
(i) 100 mm dia.
2
734
367
Supplying, fitting and fixing with cement jointing (3:1) salt glazedstoneware pipe including excavation of earth upto 1.50 metre depth in all sorts of soil both mixed or unmixed and refilling (but excluding concreting at bottom and sides). (iii) 150mm.
6
2004
334
Bituminous filler of approved type in expansion joints of dummy joints including finishing the top surface as directed.
0.68
31690
46603
ELECTRICAL INSTALLATION WORKS Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board of 18 SWG, 64MM depthwith top cover plate flushed in wall incl. mending good damages to original finish
2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC Average run 8 mtr
314
360472
1148
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish
2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC On Board
30
6810
227
SUB-HEAD 2--CUTTING CHANNEL & CABLE, WIRE LAYING Cutting Channel of required size on masonry wall by Electric operated cutting machine incl. supplying & fixing of heavy gauge Polythene pipe of following diameter as per GS. 13 mm dia 3 mm thick
1101
68262
62
19 mm dia 3 mm thick
450
29700
66
25 mm dia 3 mm thick
90
7290
81
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. 3 x 22/0.3 (1.5 sqmm)
140
7000
50
2x36/0.3(2.5sqmm) + 1x22/0.3(1.5sqmm) as ECC
564
38352
68
2x(4 sqmm)+1x(2.5 sqmm)
455
45500
100
2x80/0.4 (10 sqmm) + 1x84/0.3 (6 sqmm) as ECC
165
42900
260
4x84/0.3 (6 sqmm) + 2x56/0.3 (4 sqmm) as ECC
70
20300
290
4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC
60
31080
518
4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC
95
79325
835
Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.1.5 sq.mm (Excluding Dist. Pt.WEAING SOCKET)
2602
13010
5
2.5 sq.mm
470
2820
6
4 sq.mm
212
1484
7
6 sq.mm
48
432
9
10 sq.mm
122
1464
12
16 sq.mm
44
792
18
Supply of following PVC/XLPE insulated & Sheathed cables for Working Voltage up to 1100 Volts of following sizes [Make- Havells / Polycab /Gloster/Nicco/ RR As per choice of EIC] 4 core 120 sq. mm. multy stranded alluminium conductor Armoured cable.
40
21040
526
Supplying and fixing compression type gland and finishing those for following XLPE / PVC armoured cable (2/4 / 3.5)Core as per GS. 3.5 Core 120 Sq. mm
4
2752
688
Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.100 mm dia,
12
9468
789
Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 Nos. bricks per Mtr. as per GS.1 No Cable above 35 sqmm and upto 185 sqmm incl earthing attachment in 2x 4 SWG GI [Hot Dip] Wire
15
3105
207
Laying of cable as below, after cutting floor /pavement / wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish Incl. following size GI [Hot Dip] Wire as Earthing as per GS. Above 95 sqmm incl earthing attachment in 2x 4 SWG GI [Hot Dip] Wire
15
3240
216
Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes(in mm ) flushed in wall as per GS 150 x 100 x 65
7
1050
150
Supply & Fixing bakelite / perspex top cover on existing Inspection board by Brass screws. 150 x 100 x 65
7
259
37
S & F G.I cable looping box of size (250x250x100)mm with all accessories as per GS on wall.(250x250x100)mm
2
962
481
SUB-HEAD 3--PANEL, VTPN, HTPN, SPNDB, MAIN SWITCH ETC Supplying and fixing 200A porcelin fuse base with extension strip & bridge on Suitable size 50mm X 6mm MS flat on wall incl. painting & mending good the damage incl. Connections with required FRLS PVC wires. [Make- Havells Model Base - IHKKRT4200/ L&T Similar] 450X250 , 10mm thick Backlite Sheet
3
4164
1388
Supplying and fixing 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make-L&T)200A
1
10920
10920
S & Installation floor cum wall mounted cubical type panel of size as per approved drawing for accommodation of following accessories. The panel board should be made with 16 SWG CRC Sheet and frame of the panel (1500 x1400 x300mm) with angle (40x40x5mm), flat (25x5mm) & Angle leg (75x500x6mm) iron structure and Danger board.(150x100 mm) for proper placement of following accessories. The connection of switches with busbar should be made with copper bar & copper conductor of proper size & capacity. The panel is consisting of cable allay. The metering connection should be made with 1.5 sq. mm. of copper wire. The panel board should be painted with dry powder type paint after finishing the surface properly with sand paper. The brought terminals of cable connection should be supported by Insulator.The materials & design should be approved by E.I.C before fabrication & erection.(The panel should be made from CPRI approved manufacturer) Bus Bar Arrangement
a) 4 nos. Bus-bar of size 25x5 mm bar made of tinned copper covered with heat shrinkable sleev.
b) 4 nos. Bus-bar of size 20x3 mm bar made of tinned copper covered with heat shrinkable sleev for incommer change.
c) 4 nos. Bus-bar of size 15x2 mm bar made of tinned copper covered with heat shrinkable sleev for Switches. In Coming Arrangement
d) S/F 415V,200 A,TPN SFU for Incoming Arragment without sheet steel enclosure incl. 3 nos. 160 A DIN type HRC fuse(as per Cat No. L&T)- 1 nos.
e) S/F 415V,125 A,TPN SFU for Incoming Arragment without sheet steel enclosure incl. 3 nos. 125 A DIN type HRC fuse(as per Cat No. L&T)- 1 nos.
f) S/F 415V, 250 A, TPN changeover switch for Incoming Arragment with out sheet steel enclosure (as per Cat No. L&T). ---- 1 nos.
g) S/F 415V, 125 A, TPN changeover switch for Incoming Arragment with out sheet steel enclosure (as per Cat No. L&T). ---- 1 nos. Out going Arrangement
h)S/F 415 V,32A, TPN main switch with out sheet steel enclosure.incl 3 nos. 32A DIN type HRC fuse,(as per Cat No.L&T). ----- 4 nos.
i)S/F 415 V,63A, TPN main switch with out sheet steel enclosure.incl 3 nos. 63A DIN type HRC fuse, (as per Cat No.L&T). ----- 5 nos.
j)S/F 415 V,100A, TPN main switch with out sheet steel enclosure.incl 3 nos. 100A DIN type HRC fuse, (as per Cat No.L&T). ----- 1 nos.
k)S/F 415 V, 6-32 A TP & TPN MCB 1 no. Each(Legrand). ----- 3 set.
l) S/F Multi function meter ( as per ABB-DMTME-I-485) accuracy Class1.0 for (Amp, Volt, KW & PF indicating ) --- 1 no. m) S/F indicating lamp(LED, RYB) for indicating lifetime of each phase at a galance as per RED, YELLOW , BLUE ( as per L&T)---- 3 nos. n) CT (500/5 A , 15VA/ CI.1 ) --- 4 nos.( Make : AE)
1
137446
137446
Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make- Legrand) 4 Way
1
2994
2994
8 Way
2
8808
4404
Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS. 2+16 Way[ Legrand ]
4
9240
2310
Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand] 40 A DP
4
1464
366
63 A FP
3
2661
887
Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS[ Make -Legrand ]6-32A SP
127
25400
200
SUB-HEAD 4-- PLUGS & SOCKETSSupply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.
20
7420
371
Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
20
16460
823
Supply & Fixing 240 V, 3 nos. 6 A & 1 nos. 16 A, 5 pin Modular type plug socket with 3 nos. 6 A & 1 nos. 16 A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
16
27968
1748
Supply & Fixing 240 V, 3 nos. 6 A 3 pin with 3 nos. 6 A, Modular type switch (Brand approved by EIC),with 10A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 1 row 12 Module GI Modular type switch board with 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
3
4056
1352
Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy.connections with PVC Cu wire and earth continuity wire etc.
11
5269
479
Supply & Fixing Industrial type DOL Starter on existing base by nut, bolts [Make:- L&T/As per choice of EIC] having following features, model & Cat. No:-5.5kW, 3Ph, 415V, MF1, SS97210
1
1008
1008
SUB-HEAD 5 -FIXING OF LIGHT FITTINGSFixing only fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket as per GS.
137
30825
225
Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required
16
2704
169
SUB-HEAD 6 - SUPPLY OF LIGHT FITTINGSSupply of Bulkhead LED light fitting for outdoor application,complete with all accessories as per GS. [Make- Philips/Magik/As per choice of EIC.]Cat No.-BY201P LED78S PSU HE PC/Similar Model
2
2150
1075
S & F 9W LED ( Magik/Philips) at incl. S&F of batten holder.
37
5624
152
Supply of 4 Ft. 20 Watt single/twin LED light fitting for indoor application, complete with all accessories having following Model / Cat No. (Make -Crompton/Magik/As per choice of EIC) Cat No.- IGP161LT8-16/Similar model
81
22032
272
Cat No.- IGP162LT8-16/Similar model
72
21672
301
Supply of 4 Ft. 16 Watt single/twin LED light for indoor application, having following Model / Cat No. ( Make -Crompton/Magik/As per choice of EIC) Cat No.- LTT8-16/Similar model
225
130050
578
SUB-HEAD 7 -- FIXING OF FANSSupplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification as per GS.
105
26670
254
Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board as per GS
105
42630
406
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS
105
7245
69
Engraving the deptt. number with 10 mm lettering on the body of fan upto 10 letters incl. hifen, stroke or stop
124
3348
27
Extra for additional one letter incl. hifen, stroke and stop
372
1116
3
Painting upto 10 letters of the engraved number with approved black /red paint as required
124
1488
12
Extra painting for additional one letter of the engraved number with hifen, stroke etc. with black or red paint
372
372
1
Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:23 cm / 9''
19
4921
259
Supplying & Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long)23 cm / 9''
19
3040
160
SUB-HEAD 8 -- SUPPLY OF FANSSupply of 1200 mm sweep ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS (Make -Crompton ) 1200 mm Sweep (CROMPTON Model-AURA METALIC/USHA-Stiker Galoxy)
105
265440
2528
Supply of Exhaust fans complete with all accessories having the following Model / Cat No. ( Make -EPC ) 9" ( 230mm ) Speed 1370 RPM
19
38399
2021
SUB-HEAD 9 - SUPPLY AND FIXING OF BELLSupplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board
1
182
182
Supplying & Fixing 240 V AC 12inch gong Bell (National) on HW board incl. S&F HW board.
3
5943
1981
SUB-HEAD 10 -- EARTHINGExcavation of soil for installation of Earth Electrode and filling & ramming. For Morrum Soil for 2 set dual earthing.
8
1808
226
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:By ISI-Medium GI pipe for 2 set dual earthing.By TATA - Medium GI Pipe
2
3200
1600
Connecting the equipments to earth busbar including S & F 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages for 2 set dual earthing. 2 X 126/0.4 (16 sq.mm.)
16
5088
318
Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc for 2 set dual earthing.
1
145
145
Add 12% GST
1
2952353
2952353.64
Add LW CESS @ 1%
1
275553
275553.01
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements