Varanasi Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Varanasi Development Authority Tender
Coronavirus COVID 19
Eprocure
Opening Date
28 Jan 2019Closing Date
22 Feb 2019Tender Amount
₹ 14,71,93,311Costs
EMD
₹ 30,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of 330 Houses At Dandupur, Varanasi.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_UPVDA_299825_1Bid Award Id
ViewTender No
1064/VDA/Ni/2018-19Tender Authority
Varanasi Development Authority ViewPurchaser Address
-Website
http://https://vdavns.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Same as in item 251 above but excavation in soil mixed with Moorum/ shingle/black cotton/Kankar etc,requiring the use of special T & P,such as pickaxe,subbals etc.
887
-
130
Add extra to items 251 and 252 for every additional lift of 1.5m.And addition lead of 30 metre or part there of.
113
-
17
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
2216
-
120.91
Cartage of Ballast Kankar coal grit or sand etc,including loading and unloading but excluding stackings on pocca roads. (5th K.M)
2216
-
173
Sand filing in plinth including supply of necessary quantity of sand from a distance not exceeding 8km from the site of work and including watering dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of the work.
292
-
630
Clearing grass and removal of rubbish up to a distance of 30m outside the periphery of the area as per technical specification clause201. by manual means.
3385
-
3.6
Anti termite treatment
-
-
-
Providing and injection chemical emulsion for pre-constructional antitermite treatment and creating a chemical barrior under and arround the column pits, wall trenches, basement excavation top surface of plinth, filling juction of walls and floors, along the external perimetre of building, expansion joints surrounding of pipes and conduit etc. complete (Plinth area of the building at ground floor only shall be measured as per. Is 6313 (PartII 1981)) Aldrine emulsifiable concentrate or any other approved material such as Hepthachlor or chlordance will be used. The rate of application of chemical emulsion shall be as follows.
-
-
-
(1) Treatment for Masonarry & foundation 5 litters per sqm.
-
-
-
(2) Back fill in immediate contact with foundation 7.5 liters per sqm.
-
-
-
(3) Treatment for top surface of plinth filling 5 liters per sqm.
-
-
-
(4) Treatment of soil along External Preimertre of Building 7.50 Litres per Sqm.
-
-
-
(5) Treatment of soil under Apron along external perimeter 5 liters per sqm.
2553
-
190
CONCRETE WORKS
-
-
-
Providing and laying Cement concrete with 4cm gauge approved stone ballast, approved coarse sand and cement in the proportion of 1:4:8 (1 cement ; 4 Coarse sand : 8 graded Stone Ballast 40mm. Nominal size.) including supply of all materials, labour and T & P etc. required for proper completion of the work.
568
-
4900
Providing and laying D.P.C 2.50cm thick with Cement concrete Consisting of One Part Cement 1-1/2 Parts approved 13mm. (1/2") graded stone grit and including water proofing material as ordered by the engineer-in-charge in the proportion as specified by the manufacture.
195
-
290
Painting on D.P.C with two coats of air blown bitumen 85/50 or 85/25 @1.7kg/sqm. Aprox including cost of fuel if any.
195
-
72
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth
660
-
450.35
REINFORCED CEMENT CONCRETE WORK
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete.
892
-
186.49
Suspended floors, roofs, landings, balconies and access platform.
9545
-
406.05
Lintels, beams, plinth beams, girders, bressumers and cantilevers
10388
-
329.71
Columns, Pillars, Piers, Abutments, Posts and Struts.
6810
-
449.85
Stairs, (excluding landings) except spiral-staircases.
371
-
403.22
Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.
1242
-
186.49
Edges of slabs and breaks in floors and walls
-
-
-
Under 20 cm wide
3795
-
117.5
Weather shade, Chajjas, corbels etc., including edges.
366
-
501.68
Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).
45
-
12237.06
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits.
-
-
-
50 mm thick
631
-
783.22
Mild steel or iron work in plain work such as reinforced concrete or reinforced brick work (When not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including the supply of steel and its wastage Bend, hooks and authorized over lapping shall be measured.
470181
-
53.2
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.
-
-
-
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).
-
-
-
All works upto plinth level.
1488
-
6198.5
All works above plinth level upto floor V level.
2674
-
6971.2
Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof.
-
-
-
5th. Floor Lvl. To Top Lvl.
47
-
223.36
BRICK WORK
-
-
-
First Class brick work in 1:4 cement and coarse sand of 1.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc.required for proper completion of the work. Above but in super structure above including necessary cutting and moulding of brick work as required and also including honey combed brick in thickness of wall not to be less than 1. 1/2 brick thick. Add For Extra labour to above items. but for wall of one brick thick add for extra labour. (230mm thick brick wall)
-
-
-
Foundation
87
-
-
Gr. Floor
3
-
-
1st Floor (add in rates 1% extra for each floor)
3
-
4775
2nd Floor
3
-
4775
3rd Floor
3
-
4822.75
4th Floor
3
-
4919.69
Terrace Floor
1
-
-
Brick work super structure with 1:4 cement coarse sand mortar Above but in super structure above including necessary cutting and moulding of brick work as required and also including honey combed brick in thickness of wall not to be less than 1. 1/2 brick thick. Add For Extra labour to above items. but for wall of one brick thick add for extra labour. Extra for wall of half brick (4. 1/2") thick (115mm thick brick wall)
-
-
-
Gr. Floor
71
-
-
1st Floor (add in rates 1% extra for each floor)
127
-
4887
2nd Floor
127
-
4887
3rd Floor
127
-
4935.87
4th Floor
127
-
4985.23
Terrace Floor
1
-
5035
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry (with F.P.S. bricks).
5025
-
54.66
Providing and laying autoclaved aerated cement blocks masonry with 150mm/225mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).
2598
-
5468.36
Extra for brick work / AAC block masonry / Tile brick masonry in superstructure above floor V level, for each four floors or part thereof by mechanical means.
204
-
197.54
WOOD & PVC WORK
-
-
-
Supply and fixing of Flush door commercial quality conforming to IS : 2202 (Part I 1983) including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges, bolts locks, handles, springs andother fittings but excluding their supply and including painting with two coats of black japan paint on all iron fitting if necessary. Fitting with necessary screws to be supplied departmentally.
-
-
-
35 mm thick Single Leaf.
1538
-
1365.38
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
1538
-
351.77
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :
-
-
-
300x16 mm
1073
-
148.89
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :
-
-
-
250x10 mm
2290
-
61.53
150x10 mm
2274
-
42.4
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :
-
-
-
125 mm
2290
-
27.5
100 mm
2274
-
21.77
STEEL WORK
-
-
-
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
-
-
-
Fixing with 15x3 mm lugs 10 cm long embedded in cement
concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size)
35330
-
71.2
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
578
-
125.09
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required
-
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
18005
-
82.64
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete.
-
-
-
With 4.0 mm thick glass panes.
1714
-
662.54
Supplying and fixing-rolling shuters of approved design made of 80x125mm (3" x 18 gauge) cold rolled MS Lath inter locked throughout their entire length and jointed together at the end by end locks end mounted on specially designed pipe shaft with brackets, side guides and arrangement for inside and outside poking with push & pull operation complete and including the cost of top cover and spring required for proper completion of the work as per direction of E/I.
74
-
2600
FLOORING WORK
-
-
-
2.5cm. (1") thick 1:2:4 plain cement concrete floor eith cement, approved coarse sand and 2cm. (3/4") graded approved stone laid in panels finished with 3mm. (1/8") flooring coat of neat cement and marble dust in 5:1 as specified over & including 8cm. (3") thick base concrete consisting of cement, local sand and brick ballast 4cm. (1 1/2") gauge in the proportion of 1:4:8 and removing any over lapping mortar at the joints of panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc. required for proper completion of the work.
-
-
-
Same as item 601 above without base concrete
9682
-
235
52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
775
-
533.89
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.
-
-
-
18 mm thick
2500
-
336.58
ROOFING
-
-
-
Providing and laying gola 75x75mm in cement concrete M15 grade including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design in 75x75 mm deep chase.
780
-
147.11
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
60
-
180.38
Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per
IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm,
at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges
-
-
-
of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture’s specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with:
-
-
-
8 mm thick Calcium Silicate Board made with Calcareous &
Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process.
380
-
881.49
FINISHING WORK
-
-
-
Providing 12 mm Thk. cement plaster with cement and c. sand (of 2.25 fineness modules) mortar in 1:4 . Minimum thickness not to be less than 10mm including supply of all materials, labour and T&P etc. required for proper completion of work. Extra labour and material for plaster over rough face of one brick wall.
39000
-
139
2cm (3/4") thick cement plaster in dado or skirting in 1:2 consisting of one part cement and 2 part of approved coarse sand laid in panels, finished with 3mm (1/8") floating coat of neat cement of cement and marble dust in ratio 5:1 including supply of all materials, labour and T&P etc. required for proper completion of work.
9920
-
195
Making grooves 10 to 12mm wide x8mm deep in plaster of wall or in ceiling vertically of horizontally as required.
3800
-
26
Providing and mixing approved water proofing material in cement mortar for plastering.
4600
-
40
White washing two coat including supply of all material, labour, T & P etc. required for proper completion of the work
38935
-
10.5
Colour washing two coat using approved colouring material of buff, blue gray or brown shade including supply of all material, labour, T & P etc. required for proper completion of the work
9915
-
16
Painting or varnishing new iron work in small areas or new wood with one coat (up to one sq. meter) of ready mixed priming paint and one coat of approved superior quality ready mix paint (2nd quality synthetic enamel paint of approved brand such as british paint, shalimar, asian or equivalent as approved by E/I) or Varnish including supply of all material, labour, T & P etc. required for proper completion of the work. Paint to be used should confirm the I.S.I. No. 103-1950
5500
-
90.38
WATER PROOFING
-
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
1045
-
486.44
Providing & laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound confirming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand ) admixed with water proofing compound confirming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement of 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound confirming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the
-
-
-
adjoining walls upto 300mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound confirming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement mortar 1:4 (1 cement : 4 coarse sand ) admixed with water proofing compound confirming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-charge:
-
-
-
With average thickness of 120mm and minimum thickness at khurra as 65mm.
2415
-
994.85
PLUMBING WORK
-
-
-
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid
330
-
3144
Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.
-
-
-
Flexible Pipe
-
-
-
32 mm dia (for wash basin)
330
-
40.86
40 mm dia (for sink and urinal)
330
-
43.26
Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
Kitchen sink with drain board
-
-
-
510x1040 mm bowl depth 250 mm
330
-
3962.3
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :
-
-
-
White Vitreous flat back Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
330
-
658.65
Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection pipe with brass unions.
-
-
-
45 cm length
-
-
-
15 mm nominal bore
330
-
65.19
Providing and fixing C.P brass bib cock of approved quality conforming to IS standards IS: 8931.
-
-
-
15 mm nominal bore
330
-
357.4
Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
-
-
-
15 mm nominal bore
330
-
533.94
Providing & fixing 15 mm nominal bore C.P brass Angle valve for basin and sink of approved quality conforming to IS 8931.
660
-
457.4
15 mm nominal bore
1362
-
320
Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes CTS-SDR 11, class-1 CPVC Pipes (pressure rating 28 kg/cm2 at 23oC and 7 kg/cm2 at 82oC) confirming to IS : 15778-2007, ASTM D-2846, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge.
-
-
-
Concealed work including cutting chase and making good the wall etc.
-
-
-
15mm nominal outer dia pipes
2370
-
236.73
20mm nominal outer dia pipes
1345
-
273.89
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.
-
-
-
The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site.
-
-
-
110 mm dia (Wall Thickness - 3.2 to 3.8 mm)
495
-
563
Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as required.
-
-
-
32 mm dia.
660
-
88
50 mm dia.
495
-
120
Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects.
-
-
-
Multi Floor Trap (5" Ht) with height raiser and branch saddle strip of 50/75 mm outlet
8
-
334
Plain Floor Trap 100X100 outlet and with height raiser
330
-
381
P-Trap type Floor Trap 110 x 110 mm
330
-
415
Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps.
990
-
122
EXPOSED WATER SUPPLY PIPE
-
-
-
Providing, fixing, jointing and testing in position flowguard CPVC sch 40 pipes with sch 80 fittings confirming to ASTM F 441 suitable for cold water supply in exposed works complete with all necessary fittings i.e. elbows, tees, bends, couplers, reducers, unions, plugs, clamps including jointing the pipe and fitings by solvent cement over primer coat as per ASTM F 493 including proper supports and clamped including building expansion loop wherever pipe crosses exp joint, complete as required by the Engg-in-charge for proper completion of the work.
-
-
-
20 mm ID (min wall thickness - 5.16 mm)
3960
-
211.86
25 mm ID (min wall thickness - 5.16 mm)
2100
-
233.05
32 mm ID (min wall thickness - 5.16 mm)
509
-
254.23
40 mm ID (min wall thickness - 5.16 mm)
437
-
296.61
UNDER GROUND WATER SUPPLY PIPE
-
-
-
Providing, fixing, jointing and testing in position flowguard CPVC sch 40 pipes with sch 80 fittings confirming to ASTM F 441 suitable for cold water supply in exposed works complete with all necessary fittings i.e. elbows, tees, bends, couplers, reducers, unions, plugs, clamps including jointing the pipe and fitings by solvent cement over primer coat as per ASTM F 493 including proper supports and clamped including building expansion loop wherever pipe crosses exp joint, complete as required by the Engg-in-charge for proper completion of the work.
-
-
-
65 mm ID (min wall thickness - 5.16 mm)
357
-
1177
80 mm ID (min wall thickness - 5.16 mm)
438
-
1529
Providing & fixing of hand lever operated forged brass body full way ball valve type isolating valve having forged brass hard chrome plated mirror finish ball, steel handle with PVC grip, teflon seat, screwed ends tested to a pressure of 15 kg/sqcm complete.
-
-
-
20 mm nominal bore
330
-
605
25 mm nominal dia
330
-
898
32 mm nominal bore
40
-
1474
40 mm nominal bore
8
-
2105
50 mm nominal dia
8
-
2961
BUTTERFLY VALVE
-
-
-
Providing & fixing of hand lever operated forged brass body full way ball valve type isolating valve having forged brass hard chrome plated mirror finish ball, steel handle with PVC grip, teflon seat, screwed ends tested to a pressure of 15 kg/sqcm complete.
-
-
-
65 mm nominal bore
8
-
449
80 mm nominal bore
8
-
605
Providing & fixing brass ball float valve with bronze floats of approved quality complete.
-
-
-
32 mm nominal dia
8
-
3440
25 mm nominal dia
8
-
2542
Providing & fixing of medium class G.I.spout up to 300 mm. length including cutting and making good the walls and floors etc. as required.
-
-
-
a) 25 mm dia
16
-
85
Supply & fixing in position ISI marked cast iron double flanged butterfly valves (PN 1 MPa) as per IS:13095, with SS disc, shaft, seating rings, internal fastening, nitrile rubber lining, nuts, bolts including transporting to worksite, 3 mm thick rubber gaskets etc. including testing, Complete as per drawings & directions of the Engineer-in-charge.
-
-
-
150 mm nominal dia
8
-
9800
Catch Basin
-
-
-
Constructing brick masonry catch basin with F.P.S. bricks in cement mortar 1 : 4 (1 cement : 4 coarse sand) RCC top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 grade stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1cement 3 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete with PVC encased 12 mm dia steel bar foot rests fixing with 20x20x10 cm cement concrete blocks 1:2:4, including placing of CI/PCC/ SFRC grating/ cover and frame in 150 mm thick cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) including centering, shuttering, excavation/blasting in all kind of soil, refilling and disposal of surplus earth as directed complete in all respects.including cover
-
-
-
Inside size 450 x 450 mm & 450 mm deep
11
-
7500
Inside size 600 x 600 mm & 600 mm deep
59
-
9000
Ractangular Manhole
-
-
-
Constructing brick masonry manhole/Inspection Chamber with F.P.S. bricks in cement mortar 1 : 4 (1 cement : 4 coarse sand) RCC top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 grade stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement :2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete with PVC encased 12 mm dia steel bar foot rests fixing with 20x20x10 cm cement concrete blocks 1:2:4, including fixing of CI/SFRC/PCCC MH cover and frame in 150 mm thick cement concrete 1:2:4 (1cement :2 coarse sand :4 graded stone aggregate of 20 mm nominal size) including centering, shuttering, excavation/blasting in all kind of soil, refilling and disposal of surplus earth as directed complete in all respects including cost cover
-
-
-
Inside size 900 x 800 mm & 900 mm deep
25
-
15000
Extra construction depth of rectangular manhole
-
-
-
For manhole with F.P.S. bricks in cement mortar 1 : 4 (1 cement : 4 coarse sand) as per above item.
-
-
-
Size 900 x 800 mm
2.3
-
8500
Construction of circular manhole for storm water , Sewer drainage
-
-
-
Constructing brick masonry circular manhole of required size 560 mm internal diameter of at top cover with F.P.S. bricks in cement mortar 1:4 (1 cement: 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size ) finished with a floating coat of neat cement all complete as per standard design with PVC encased 12 mm dia steel bar foot rests fixing with 20x20x10 cm cement concrete blocks 1:2:4, including fixing of CI / PCCC / SFRC MH cover and frame in 150 mm thick cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) including centering, shuttering, excavation/blasting in all kind of soil, refilling and disposal of surplus earth as directed complete in all respects. Including cost cover
-
-
-
900 mm internal dia at bottom & 900 mm deep
38
-
18000
Valve chamber
-
-
-
Constructing brick masonary chamber (for housing lawn hydrant) of brick work with bricks of class 75 in cement mortar 1:5 (1 cement:5 fine sand) plastering internal face with cement 1:3 (1 cement mortar: 3 fine sand) and a rough plaster on outer face with a floating coat of neat cement. R.C.C. top slab with manhole cover & frame. Including excavation/blasting in all kind of soil, dewatering, refilling, watering, ramming & removing the surplus excavated material complete as required. (All sizes are clear internal sizes).
-
-
-
Size 300 x 300 x 450 mm deep (with 450 x 450 LD : DI cover (Wt : 8 kg)
4
-
3500
Providing and fixing square-mouth S.W. gully trap grade-'A' complete with C.I. grating, brick masonry chamber with bricks of class designation 75, plastering the exposed surfaces, required excavation and water-tight C.I. cover with frame of 300x300 mm. size (inside), the weight of cover to be not less than 4.5 Kgs. and frame to be not less than 2.7 Kgs. as per standard design: 100 x100 mm. size 'P'-type.( Make of Trap ; Perfect/ RK / Anand )
30
-
950
Electrical work
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group -A
4870
-
548
Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cablein 20 mm dia heavy duty (2mm thick) PVC conduit with 1 nos. 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable as earth continuity wiredrawn inside the conduit complete in all respect.
15730
-
121
Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit with one no. 2.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit wire including matching colour wash etc. complete in all respect.
15060
-
149
Supply and wiring of submain with two number 6 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core aluminium conductor cable in 25 mm dia heavy duty (2 mm thick) PVC conduit with one number 4 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit. wire including matching colour wash etc. complete in all respect.
219
-
204
Supply and wiring of submain with two number 10sq.mm.FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 25 mm dia heavy guage PVC conduit partly concealed in wall & partly laid in slab along with reinforcement before concreting, with one number 10 SWG copper earth continuity wire including matching colour wash etc. complete in all respect.
10205
-
272
Supply and wiring of 4 number 6 sq.mm. FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in partly laid in slab alongwith reinforcement before concreting, with two number but in 32 mm dia heavy duty (2 mm thick) PVC conduit with 2 nos 4 sq.mm.FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit. wire including matching colour wash etc, complete in all respect.
145
-
360
Supply and wiring of submain with 4 number 10 sqmm. PVC insulated 1100 V grade single core copper conductor cable in 32 mm dia heavy heavy duty conduit partly laid in slab along with reinforcement before concreting and partly concealed in wall, with 2.nos 6 sqmm. FRLS PVC insulated 1100 V grade multistrand single core copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect .
145
-
505
Supply and wiring of submain with 4 number 16 sqmm. PVC insulated 1100 V grade single core copper conductor cable in 40 mm dia heavy heavy duty conduit partly laid in slab along with reinforcement before concreting and partly concealed in wall, with 2.nos 10 sqmm. FRLS PVC insulated 1100 V grade multistrand single core copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect .
145
-
723
Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.
660
-
197.11
Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.
1004
-
275.96
Supply and fixing and concealing of following dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge
-
-
-
20mm dia conduit
1090
-
62
25mm dia conduit
1090
-
72
32mm dia conduit
2326
-
87
SUBHEAD- III: M.V. PANELS/ DISTRIBUTION BOARD
-
-
-
S & F surface/Flush mounting 8 ways SPN distribution board without additional metal door without MCB complete in all respect, as direct by Engineer in Charge.
-
-
-
2 + 8 way, Double door
340
-
1090
Supplying and fixing surface/ flush mounting following way TPN distribution board (Legand Lexic ) without MCB with additional metal door complete in all respects as directed at site by Engineer in charge.
-
-
-
4 way Double door
10
-
7560
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, etc. as required.
-
-
-
40 amps
340
-
455
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, etc. as required.
-
-
-
40 amps
10
-
430
Supplying and fixing following rating, 2 pole, 240 volts, 30 mA ELCB/RCCB in the existing MCB DB complete with connections, etc. as required.
-
-
-
40 amps
340
-
2280
Supplying and fixing following rating, 4 pole, 415 volts, 30 mA ELCB/RCCB in the existing MCB DB complete with connections, etc. as required.
-
-
-
40 amps
10
-
2820
Supplying and fixing 6 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.CAT B
-
-
-
Single pole
2835
-
206
Supplying, installation, testing and commissioning of cubical type MV Panel made out of CRCA sheet steel, totally enclosed , free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with min seven tanks ) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 100mmx50mmx5mm (thick), Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates in two half as required as per single line diagram & specification enclosed with the following switch gears (Feeder Pillar For Block-2,3,4,5).
-
-
-
NOTE:
-
-
-
All MCCBs shall have Ics=Icu=100%
-
-
-
MCB Should be connected throught terminal Strip of suitable rating
-
-
-
MCCB should be Extended rotary operating mechanism with door interlocking with defeat feature and padlock facility. MCCB should have spreader links & phase barriers.
-
-
-
All outgoing MCCB feeders shall have ON/OFF Trip indication lights (LED Type)
-
-
-
INCOMER:-
-
-
-
1 Nos. 630 Amps. TPN MCCB (35 KA) MCCB with variable current settings and having microprocessor based O/L, S/C & E/F protection release.
-
-
-
1 Set phase indication lights (R, Y, B) with 6A control SP MCBs
-
-
-
1 No. Volt Meter (digital type) with VSS
-
-
-
1 No. 0-630 Amp. Ammeter (digital type) with selector switch with one set Suitable C.Ts.
-
-
-
BUS BARS:-
-
-
-
800 Amps. TP&N aluminium bus bars (25 KA)
-
-
-
OUT GOINGS:-
-
-
-
7 Nos. 125 A TPN, MCCB (25KA).
5
-
157300
Supplying, installation, testing and commissioning of cubical type MV Panel made out of CRCA sheet steel, totally enclosed , free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with min seven tanks ) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 100mmx50mmx5mm (thick), Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates in two half as required as per single line diagram & specification enclosed with the following switch gears (Feeder Pillar For Block -1 & 6).
-
-
-
NOTE:
-
-
-
All MCCBs shall have Ics=Icu=100%
-
-
-
MCB Should be connected throught terminal Strip of suitable rating
-
-
-
MCCB should be Extended rotary operating mechanism with door interlocking with defeat feature and padlock facility. MCCB should have spreader links & phase barriers.
-
-
-
All outgoing MCCB feeders shall have ON/OFF Trip indication lights (LED Type)
-
-
-
INCOMER:-
-
-
-
1 Nos. 400 Amps. TPN MCCB (35 KA) MCCB with variable current settings and having microprocessor based O/L, S/C & E/F protection release.
-
-
-
1 Set phase indication lights (R, Y, B) with 6A control SP MCBs
-
-
-
1 No. Volt Meter (digital type) with VSS
-
-
-
1 No. 0-400 Amp. Ammeter (digital type) with selector switch with one set Suitable C.Ts.
-
-
-
BUS BARS:-
-
-
-
600 Amps. TP&N aluminium bus bars (25 KA)
-
-
-
OUT GOINGS:-
-
-
-
7 Nos. 125 A TPN, MCCB (25KA).
2
-
154660
Supplying, installation, testing and commissioning of cubical type MV Panel made out of CRCA sheet steel, totally enclosed , free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with min seven tanks ) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 100mmx50mmx5mm (thick), Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates in two half as required as per single line diagram & specification enclosed with the following switch gears (Floor Panel for Block-1,2,3,4,5 for Ground Floor ).
-
-
-
NOTE:
-
-
-
All MCCBs shall have Ics=Icu=100%
-
-
-
MCB Should be connected throught terminal Strip of suitable rating
-
-
-
MCCB should be Extended rotary operating mechanism with door interlocking with defeat feature and padlock facility. MCCB should have spreader links & phase barriers.
-
-
-
All outgoing MCCB feeders shall have ON/OFF Trip indication lights (LED Type)
-
-
-
INCOMER:-
-
-
-
1 Nos. 125 Amps. 4P MCCB (25 KA) MCCB with variable current settings and having microprocessor based O/L, S/C & E/F protection release.
-
-
-
1 Set phase indication lights (R, Y, B) with 6A control SP MCBs
-
-
-
1 No. Volt Meter (digital type) with VSS
-
-
-
1 No. 0-125 Amp. Ammeter (digital type) with selector switch with one set Suitable C.Ts.
-
-
-
BUS BARS:-
-
-
-
200 Amps. TP&N aluminium bus bars (25 KA)
-
-
-
OUT GOINGS:-
-
-
-
11 Nos. 40 A DP, MCB (10KA).
6
-
54375
Supplying, installation, testing and commissioning of cubical type MV Panel made out of CRCA sheet steel, totally enclosed , free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with min seven tanks ) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 100mmx50mmx5mm (thick), Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates in two half as required as per single line diagram & specification enclosed with the following switch gears (Floor Panel for Block-6 for Ground Floor ).
-
-
-
NOTE:
-
-
-
All MCCBs shall have Ics=Icu=100%
-
-
-
MCB Should be connected throught terminal Strip of suitable rating
-
-
-
MCCB should be Extended rotary operating mechanism with door interlocking with defeat feature and padlock facility. MCCB should have spreader links & phase barriers.
-
-
-
All outgoing MCCB feeders shall have ON/OFF Trip indication lights (LED Type)
-
-
-
INCOMER:-
-
-
-
1 Nos. 125 Amps. 4P MCCB (25 KA) MCCB with variable current settings and having microprocessor based O/L, S/C & E/F protection release.
-
-
-
1 Set phase indication lights (R, Y, B) with 6A control SP MCBs
-
-
-
1 No. Volt Meter (digital type) with VSS
-
-
-
1 No. 0-125 Amp. Ammeter (digital type) with selector switch with one set Suitable C.Ts.
-
-
-
BUS BARS:-
-
-
-
200 Amps. TP&N aluminium bus bars (25 KA)
-
-
-
OUT GOINGS:-
-
-
-
16 Nos. 40 A DP, MCB (10KA).
1
-
63340
Supplying, installation, testing and commissioning of cubical type MV Panel made out of CRCA sheet steel, totally enclosed , free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with min seven tanks ) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 100mmx50mmx5mm (thick), Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates in two half as required as per single line diagram & specification enclosed with the following switch gears (Floor Panel for Block-2,3,4 & 5 for 1st to 4th Floor ).
-
-
-
NOTE:
-
-
-
All MCCBs shall have Ics=Icu=100%
-
-
-
MCB Should be connected throught terminal Strip of suitable rating
-
-
-
MCCB should be Extended rotary operating mechanism with door interlocking with defeat feature and padlock facility. MCCB should have spreader links & phase barriers.
-
-
-
All outgoing MCCB feeders shall have ON/OFF Trip indication lights (LED Type)
-
-
-
INCOMER:-
-
-
-
1 Nos. 125 Amps. 4P MCCB (25 KA) MCCB with variable current settings and having microprocessor based O/L, S/C & E/F protection release.
-
-
-
1 Set phase indication lights (R, Y, B) with 6A control SP MCBs
-
-
-
1 No. Volt Meter (digital type) with VSS
-
-
-
1 No. 0-125 Amp. Ammeter (digital type) with selector switch with one set Suitable C.Ts.
-
-
-
BUS BARS:-
-
-
-
200 Amps. TP&N aluminium bus bars (25 KA)
-
-
-
OUT GOINGS:-
-
-
-
17 Nos. 40 A DP, MCB (10KA).
17
-
65460
Supplying, installation, testing and commissioning of cubical type MV Panel made out of CRCA sheet steel, totally enclosed , free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with min seven tanks ) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 100mmx50mmx5mm (thick), Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates in two half as required as per single line diagram & specification enclosed with the following switch gears (Floor Panel for Block-1 & 6 for 1st to 4th Floor ).
-
-
-
NOTE:
-
-
-
All MCCBs shall have Ics=Icu=100%
-
-
-
MCB Should be connected throught terminal Strip of suitable rating
-
-
-
MCCB should be Extended rotary operating mechanism with door interlocking with defeat feature and padlock facility. MCCB should have spreader links & phase barriers.
-
-
-
All outgoing MCCB feeders shall have ON/OFF Trip indication lights (LED Type)
-
-
-
INCOMER:-
-
-
-
1 Nos. 125 Amps. 4P MCCB (25 KA) MCCB with variable current settings and having microprocessor based O/L, S/C & E/F protection release.
-
-
-
1 Set phase indication lights (R, Y, B) with 6A control SP MCBs
-
-
-
1 No. Volt Meter (digital type) with VSS
-
-
-
1 No. 0-125 Amp. Ammeter (digital type) with selector switch with one set Suitable C.Ts.
-
-
-
BUS BARS:-
-
-
-
200 Amps. TP&N aluminium bus bars (25 KA)
-
-
-
OUT GOINGS:-
-
-
-
12 Nos. 40 A DP, MCB (10KA).
9
-
57010
Supplying, installation, testing and commissioning of cubical type MV Panel made out of CRCA sheet steel, totally enclosed , free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with min seven tanks ) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 100mmx50mmx5mm (thick), Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates in two half as required as per single line diagram & specification enclosed with the following switch gears (Plumbing Panel).
-
-
-
NOTE:
-
-
-
All MCCBs shall have Ics=Icu=100%
-
-
-
MCB Should be connected throught terminal Strip of suitable rating
-
-
-
MCCB should be Extended rotary operating mechanism with door interlocking with defeat feature and padlock facility. MCCB should have spreader links & phase barriers.
-
-
-
All outgoing MCCB feeders shall have ON/OFF Trip indication lights (LED Type)
-
-
-
INCOMER:-
-
-
-
1 Nos. 160 Amps. FP MCCB (25 KA) MCCB with variable current settings and having microprocessor based O/L, S/C & E/F protection release.
-
-
-
1 Set phase indication lights (R, Y, B) with 6A control SP MCBs
-
-
-
1 No. Volt Meter (digital type) with VSS
-
-
-
1 No. 0-160 Amp. Ammeter (digital type) with selector switch with one set Suitable C.Ts.
-
-
-
BUS BARS:-
-
-
-
200 Amps. TP&N aluminium bus bars (25 KA)
-
-
-
OUT GOINGS:-
-
-
-
3 Nos. 63 A TP, MCB (10KA).
-
-
-
2 Nos.40 A TP, MCB (10KA).
-
-
-
3 Nos. 32 A TP, MCB (10KA).
-
-
-
3 Nos. 25 A TPN, MCB (10KA).
-
-
-
2 Nos. 10 A TPN, MCB (10KA).
-
-
-
2 Nos. 20 A DP, MCB (10KA).
1
-
74010
Supplying, installation, testing and commissioning of cubical type MV Panel made out of CRCA sheet steel, totally enclosed , free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with min seven tanks ) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 100mmx50mmx5mm (thick), Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates in two half as required as per single line diagram & specification enclosed with the following switch gears (Fire Pump Panel).
-
-
-
NOTE:
-
-
-
All MCCBs shall have Ics=Icu=100%
-
-
-
MCB Should be connected throught terminal Strip of suitable rating
-
-
-
MCCB should be Extended rotary operating mechanism with door interlocking with defeat feature and padlock facility. MCCB should have spreader links & phase barriers.
-
-
-
All outgoing MCCB feeders shall have ON/OFF Trip indication lights (LED Type)
-
-
-
INCOMER:-
-
-
-
1 Nos. 100 Amps. FP MCCB (25 KA) MCCB with variable current settings and having microprocessor based O/L, S/C & E/F protection release.
-
-
-
1 Set phase indication lights (R, Y, B) with 6A control SP MCBs
-
-
-
1 No. Volt Meter (digital type) with VSS
-
-
-
1 No. 0-100 Amp. Ammeter (digital type) with selector switch with one set Suitable C.Ts.
-
-
-
BUS BARS:-
-
-
-
200 Amps. TP&N aluminium bus bars (25 KA)
-
-
-
OUT GOINGS:-
-
-
-
2 Nos. 63 A TP, MCB (10KA).
-
-
-
2 Nos. 20 A DP, MCB (10KA).
1
-
45500
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
41
-
149
SUB-HEAD -IV : L.T. CABLES
-
-
-
Supply, laying of Aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top .On surface the cable run shall be fixed on MS clamps etc. of suitable size or as direction of the cable shall be properly connected with the earth conductor by clamps etc.
-
-
-
3.5 x 120 sq.mm
582
-
824
3.5 x 70 sq.mm
291
-
613
3.5 x 50 sq.mm
146
-
492
4 x 16 sq.mm
291
-
343
4 x 10 sq.mm
146
-
327
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
3.5 x 120 sq.mm
15
-
243
3.5 x 70 sq.mm
8
-
199
3.5 x 50 sq.mm
30
-
178
4 x 16 sq.mm
15
-
87
4 x 10 sq.mm
8
-
87
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
-
-
-
100mm dia
727
-
341.34
250mm dia
582
-
459.61
Steel work in built up tubular (round ,square or rectangle hollow tubes etc) trusses etc .including cutting,hosting ,fixing in position and aplying a priming coate of approved steel primer including welding and bolted with special shaped washer etc as complete.item from Civil DSR
727
-
101.77
Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
-
-
-
150mm wide 50 mm depth
582
-
377.88
300mm wide 62.5mm depth
582
-
604.8
SUB-HEAD -V : EARTHING
-
-
-
Supply and burying of 600 mm X 600 mm X 6 mm GI Plate vertically for earthing with its top at least 3 meter below ground level complete with 20mm dia G.I pipe and funnel for watering and one earthing lead of one No. 8 to 10 SWG GI wire in 15 mm dia G.I pipe and GI wire will be extra ) 30 cm square C.I frame with hinged cover masonry housing alternate layers of charcoal/coke/ and salt at least 150 mm thick around etc. as per directions of Engineer-in-charge complete in all respect s as per Drawings
13
-
5350
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
60
-
81.73
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
45
-
838.46
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
30
-
337.5
supply and fixing of one number 6 SWG G.I wire in surface or recess for loop earthing alon with existing surface/ recessed conduit/ sub-main wiring/ cable as required.
1455
-
22.11
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
148
-
124.03
SUBHEAD-VI - LIGHTNING PROTECTION SYSTEM
-
-
-
Supply, Erection, Installation & Commissioning of External Lightning Wide Area Protection System based on pro-active Early Streamer Emission (ESE) Technology. No external power source required. Break down time not more than 245.5 Micro second. Wind Resistance up to 120miles/hours. Produces a leader of not less than 2x10E8 V/m/s in the lightning generated electromagnetic field with Level-I protection radius of 108 meters at 5 mtr. Mast including mast for supporting the device. Device confirming to NFC17-102 & UNE 21186 standards & CPRI Tested.
1
-
128090
Supply, Erection, Installation & Commissioning of the Down Conductor which is a 70 Sq. mm flexibile, single core pvc insulated copper cable .
148
-
807
Supply, Erection, Installation & Commissioning of Lightning Event Counter (Model: LEC-IV) for counting the number of lightning strikes without any power supply. The Counter should be mounted on the Down Conductor and the triggering impulse should be = 1.5 KA for 8/20µs. The Lightning Event Counter should be robust, non-resettable mechanical counter with IP65 rated enclosure suitable for external application.
4
-
21950
Supply, Erection, Installation & Commissioning of the Earthing system which should cater for the Lightning Protection System earthing and should be maintenance free. Earth Enhancing Compounds should be used to treat the soil for lowering the effective ground impedance. Maintenance free earth pits made of ground enhancing material (GEM) - 3 or 4 bags of 11.3 Kg each and 250 microns copper bonded ground rods - 4 nos of size 5' length and 5/8" diameter connected with each other with 25 x 3 mm Copper Strip and high performance earth clamps.
2
-
39030
FIRE FIGHTING WORK
-
-
-
SUB HEAD (I) :- CIVIL PART
-
-
-
Supply & erection of ISI marked portable fire extinguishers, wall mounted type, wall brackets complete in all respect as per standard item with all accessories, delivery hose & nozzle whereever required, including fixing on walls as per the directions of Engineer-in-charge.
-
-
-
Water CO2 type. 9 Lt.capacity (IS:940)
18
-
3262
CO2 gas type. 4.5 kg. Capacity (IS:2878)
45
-
10822
Supply & fixing of 4 nos. G.I. round bottom fire buckets of 9.5 liters capacity filled with sand including proper supporting / mounting arrangements in MS angle iron frame, painted by fire red colour over two coats of red oxide paint and written with white paint "FIRE" complete in all respects as per the directions of Engineer-in-charge.
5
-
3389
Supply, erection and testing of ISI marked M.S. pipes (Class B - heavy duty) and specials etc. (as per IS:1239) for above ground laying for hydrants system including transportation of materials upto the worksite, cutting the pipes to required length, edge preperation, welding, fixing / erection of pipes including specials i.e. bends, tees, reducers, flanges, expansion joints wherever required, washers, nuts, bolts etc. in proper position including all supports at maximum 3 meter spacing by 3 mm thick G.I. hangers / clamps / Tie rod supports with G.I. nuts, bolts, anchor fastner and washer for hydrant / sprinkler piping, jointing by welding, aligning the pipe line, painting with two primer coat by zinc chromate primer and two coats of synthetic enamel fire red colour, providing tapping for pressure gauges and for other instruments etc. Hydrostatic testing of system as specified, flushing & cleaning by water etc. complete as per drawings & direction of the Engineer-in-charge.
-
-
-
The pipes and accessories will be provided with all type of supports (Maximum Support spacing = up to 25 mm dia @ 2 m, 32 mm to 100 mm dia @ 2.5 m, 150 mm & above dia @ 3 m) by minimum 3 mm thick G.I. clevis / sprinkler hangers / clamps / Tie rod supports with G.I. nuts, bolts, anchor / dash fastner and washer for hydrant / sprinkler piping, for 100 & 150 mm dia pipe the support will be through 50x50x6 mm painted / pre galvanized MS angle iron along with G.I. U clamp, nuts, washers, anchor fasteners etc as the case may be.
-
-
-
The quoted rates shall also include for making holes in masonry / RCC slab, wall, chases in wall, providing sleeves in RCC wall & slabs with puddle flanges whereever required & making good the same by sealing the opening to original conditions.
-
-
-
upto 40mm dia. pipe threaded forged fittings and threaded joints shall be provided and for 50mm dia & above pipes welded joints with MS / malleable iron fittings shall be used.
-
-
-
100 NB
8
-
1207
150 NB
8
-
1813
Supply, laying & jointing of ISI marked Mild Steel pipes (class C - heavy duty) (as per IS : 1239) including all fittings i.e. reducer, elbows, tees, flanges, washers, nuts, boltsetc. below ground including transportation of all materials to work site, earth work in excavation in all kinds of soil upto 1.50 meter depth, edge preparation, jointing by welding, laying the pipes in trenches in proper alignment, providing 150 mm thick fine sand layer above pipe, back filling the trenches in layers of 20 cms, consolidation of Each deposited layer, watering, ramming, disposal of surplus earth within a lead of 200 m and as directed, hydrostatic testing of the complete pipe work, providing 1:2:4 concrete thrust blocks of suitable size at all bends, tees and junctions with form works, completing the work in all respect as per drawings & direction of the Engineer-in-charge.
-
-
-
The rates will include providing and laying 4 mm thick "Pypkote" tar based polymeric corrosion protection tape over two coat of zinc chromate primer as per manufacturers specs, as directed and as per IS:10221.
-
-
-
80 MM NB
285
-
1450
150 MM NB
-
-
2033
Same as in item above but of G. I. Class B - medium duty for drainage pipe.
-
-
-
80 NB
8
-
966
Providing & fixing neoprene rubber single arch expansion joint (anti vibration bellow) as per manufacturers specifications. Tested to a pressure of 16 Kg/Cm2 including all necessary fittings complete as required.
-
-
-
80 mm dia.
2
-
4533
150 mm dia.
2
-
6990
200 mm dia.
1
-
9490
Supply & fixing in position ISI marked cast iron double flanged butterfly valves (PN 20 MPa) as per IS:13095, with SS disc, shaft, seating rings, internal fastening, nuts, bolts including transporting to worksite, 3 mm thick rubber gaskets etc. including testing, Complete as per drawings & directions of the Engineer-in-charge.
-
-
-
80 MM NB
20
-
5427
150 MM NB
-
-
9490
Supply, fixing, testing & commissioning of 20 mm bore and 30 meter long hose (high pressure rubber braided hose pipe as per IS:444) and hose reel suitable for 10 kg/sqcm operating pressure for first aid fire fighting conforming to IS : 884, with 180o full swing drum, fixing brackets, shut off gun metal nozzle, 40 mm dia. hand lever operated isolating ball valve, connecting directly from the riser through 40 mm dia. G.I.pipe with sockets, elbows, nipples etc. including providing operating instructions on a metal plate and fixing it near hose reel. The system shall be complete in all respects as per drawings and directions of Engineer-in-charge.
48
-
12350
Providing & fixing 25 mm dia air release valve with forged brass body full way ball valve type isolating valve, flanges / union, suitable for sprinkler / wet riser / down comer system with all necessary connections complete in all respects.
-
-
-
25 mm dia air release valve
8
-
2030
Providing and fixing C I body flanged S S strainer fabricated out of 1.6 mm thick Stainless Steel 304 sheet with 3 mm dia hole complete.
-
-
-
150 mm dia
1
-
14840
Providing & fixing dial pressure gauge complete in all respects. (Make : H Guru / FIBIG)
-
-
-
for 80 mm diameter pipe
8
-
710
FIRE PUMP 450 LPM
-
-
-
Supplying, installing, testing and commissioning of Electrical driven fire pump suitable for fire fighting applicatoin with automatic/ manual operation consisting of the following as under:
8
-
10160
BOUNDARY WALL
-
-
-
EARTH WORKS
-
-
-
Excavation in foundations in Ordinary Soil (Loam Clay or sand) including lift upto 1.5m. (5 fts.) and lead upto 30 m. (100 fts.) & including filling, watering and ramming of excavated Earth into the trenches or into the Space between the building and sides of foundation trenches or into plinth and removal and disposal of surplus earth as directed by the engineer-incharges upto a distance of 30m. (100 fts.) from the foundation trenches.including all T&P Phowarah and basket etc. complete
470
-
110
Same as in item 251 above but excavation in soil mixed with Moorum/ shingle/black cotton/Kankar etc,requiring the use of special T & P,such as pickaxe,subbals etc.
110
-
130
Add extra to items 251 and 252 for every additional lift of 1.5m.And addition lead of 30 metre or part there of.
38
-
17
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
325
-
120.91
Cartage of Ballast Kankar coal grit or sand etc,including loading and unloading but excluding stackings on pocca roads. (5th K.M)
250
-
173
CONCRETE WORKS
-
-
-
Providing and laying Cement concrete with 4cm gauge approved stone ballast, approved coarse sand and cement in the proportion of 1:4:8 (1 cement ; 4 Coarse sand : 8 graded Stone Ballast 40mm. Nominal size.) including supply of all materials, labour and T & P etc. required for proper completion of the work.
50
-
4900
Providing and laying D.P.C 2.50cm thick with Cement concrete Consisting of One Part Cement 1-1/2 Parts approved 13mm. (1/2") graded stone grit and including water proofing material as ordered by the engineer-in-charge in the proportion as specified by the manufacture.
70
-
290
Painting on D.P.C with two coats of air blown bitumen 85/50 or 85/25 @1.7kg/sqm. Aprox including cost of fuel if any.
70
-
72
REINFORCED CEMENT CONCRETE WORK
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete.
400
-
186.49
Lintels, beams, plinth beams, girders, bressumers and cantilevers
490
-
329.71
Columns, Pillars, Piers, Abutments, Posts and Struts.
580
-
449.85
Mild steel or iron work in plain work such as reinforced concrete or reinforced brick work (When not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including the supply of steel and its wastage Bend, hooks and authorized over lapping shall be measured.
16000
-
53.2
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.
-
-
-
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).
-
-
-
All works upto plinth level.
135
-
6198.5
All works above plinth level upto floor V level.
56.3641875
-
6971.2
BRICK WORK
-
-
-
First Class brick work in 1:4 cement and coarse sand of 1.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc.required for proper completion of the work. Above but in super structure above including necessary cutting and moulding of brick work as required and also including honey combed brick in thickness of wall not to be less than 1. 1/2 brick thick. Add For Extra labour to above items. but for wall of one brick thick add for extra labour. (230mm thick brick wall)
-
-
-
Foundation
15
-
4525
Providing and laying autoclaved aerated cement blocks masonry with 150mm/ 225mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).
80
-
5468.36
STEEL WORK
-
-
-
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required
-
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
800
-
82.64
Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used.
-
-
-
With G.I. barbed wire
900
-
12.16
Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.
360
-
59.66
FINISHING WORK
-
-
-
2cm (3/4") thick cement plaster in dado or skirting in 1:2 consisting of one part cement and 2 part of approved coarse sand laid in panels, finished with 3mm (1/8") floating coat of neat cement of cement and marble dust in ratio 5:1 including supply of all materials, labour and T&P etc. required for proper completion of work.
1200
-
195
Providing and mixing approved water proofing material in cement mortar for plastering.
180
-
40
Colour washing two coat using approved colouring material of buff, blue gray or brown shade including supply of all material, labour, T & P etc. required for proper completion of the work
1300
-
16
Painting or varnishing new iron work in small areas or new wood with one coat (up to one sq. meter) of ready mixed priming paint and one coat of approved superior quality ready mix paint (2nd quality synthetic enamel paint of approved brand such as british paint, shalimar, asian or equivalent as approved by E/I) or Varnish including supply of all material, labour, T & P etc. required for proper completion of the work. Paint to be used should confirm the I.S.I. No. 103-1950
130
-
90.38
GST will be paid as per applicable
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements