Back
  1. Home/
  2. Indian Tenders/
  3. Telangana Tenders/
  4. Defence Research And Development Organisation/
  5. Overview

Defence Research And Development Organisation Tender

For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.

Defence Research And Development Organisation - DRDO Tender

Works
Coronavirus COVID 19
Eprocure
Ranga Reddy, Telangana

Opening Date

5 Mar 2019

Closing Date

2 Apr 2019

Tender Amount

₹ 3,22,18,900 
This is an estimated amount, exact amount may vary.
Notes
Download

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Request Call Back
Documents
Report Missing Document

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
CHILLER - 35 TR (123.09 kW) Rated capacity (2 Running& 1 Standby)

3

-

-

... More
CHILLED WATER PUMPS

-

-

-

... More
Supply, installation, testing and commissioning of Horizontal back pull-out / Vertical Inline chilled water pump of each 5.88 l/s cap. & 30 m head and should comprise of CI body, bronze impeller, SS shaft, mechanical seal, 4 pole motor of EFF1-class, MS base frame for pump, drive assembly including providing of floating pedestals, vibration isolation neoprene pads & thermal insulation for pumps and all the other necessary work as per tender specification and schedule of equipment. Pump performance curves shall be submitted for Engineer-in-charge approval prior to manufacture.(2Running & 1 Standby)

3

-

-

... More
Supply, installation, testing and commissioning of variable speed pumping system comprising of the following items. All equipment in this system are to be sourced from a single vendor/source.

1

-

-

... More
3 nos Variable frequency drives - housed in a floor mounted mechanically aspirated electrical panel to house all related components including MPCB & by-pass starters. VFD to be equivalent / similar to Danfoss model VLT-HVAC series.

-

-

-

... More
1 no Dedicated micro processor based pump logic controller and software duly downloaded in the pump logic controller.

-

-

-

... More
3 sets Differential pressure sensors/transmitters (To be located one each at the Plant Room, farthest location and an intermediate location in the campus.)

-

-

-

... More
Interfacing amongst all components and compatibility of I/O signals

-

-

-

... More
PRESSURISATION UNIT & EXPANSION TANK

-

-

-

... More
Supply, installation, testing and commissioning of Pressurization unit comprise of two nos. (1 working + 1 stand-by) high pressure pumps of suitable pressure rating mounted on M.S.frame, complete with interconnecting piping, isolation valves, NRV, Y-strainer, pressure gauge, pressure transmitter, control panel, electrical MCB and interconnecting wiring, control panel, pressurized expansion tank of adequate capacity with 10 bar pr.rating, interchangeable EPDM-BUTYL rubber membrane, complete with safety relief valve, pressure reducing valve and pressure gauge, tank pressure rating to suit the

1

-

-

... More
system pressure, adequately sized to compensate for water expansion due to operating temperature variations, insulated and cladded with 26G-aluminium cladding, necessary valves, fittings and accessories etc., and as per tender specification.

-

-

-

... More
FLEXIBLE EXPANSION JOINTS

-

-

-

... More
Supply and installation of Rubber flexible expansion joints and as per tender specification. The scope includes all accessories, fittings, bolts& nuts and consumables.

-

-

-

... More
80 mm dia. for chillier cooler

6

-

-

... More
80 mm dia. For chilled water pumps

6

-

-

... More
MAKE-UP TANK

-

-

-

... More
2000 lts capacity Make-up tank of HDPE material complete with Makeup connection, Quick fill, outlet connection, drain with valve, overflow connection, air-vent, brass ball float valve etc. along with necessary Structural supporting arrangement.

1

-

-

... More
AIR SEPARATOR

-

-

-

... More
Supply and installation of Air Separator in chilled water pipe line including all accessories. The centrifugal air separator shall be manufactured from welded black mild steel plate, treated internally / externally with rust inhibiting primer, to be complete with a set of supporting feet and all mounted on a small concrete base. The air separator shall be complete with chilled water inlet & outlet flanged connections on periphery of tank i.e., on circumference, arrangement in such way that the air entrapped in water separated with centrifugal action of water, adequately sized to achieve maximum air-separation, automatic air vent provided on top of convex portion of tank and constructed for working pressure of 10 bar. The air separator shall be insulated with 50 mm thick insulation to the specifications and cladded with 26G aluminium cladding.

1

-

-

... More
CHILLED WATER PIPING:

-

-

-

... More
MS 'C' class Piping

-

-

-

... More
Chilled Water piping with Class - C, ERW - MS Pipes. The scope includes supply of pipes, heavy gauge necessary fittings, flanges, bolts & nuts, supports, supporting self threaded rods and consumables etc.,

-

-

-

... More
100 mm dia

-

-

-

... More
80 mm dia

-

-

-

... More
65 mm dia

-

-

-

... More
50 mm dia

15

-

-

... More
40 mm dia

15

-

-

... More
32 mm dia

15

-

-

... More
25 mm dia

15

-

-

... More
Chilled Water Piping Insulation:

-

-

-

... More
Supply, installation, testing and commissioning of chilled water piping insulation with fire retardant rigid polyurethane foam (RPUF) pre-formed pipe sections of 38 kg/cum density, insulation surface wrapped with polythene vapour barrier & 26 g GI chicken wire mesh, finally covered with 26g Aluminium Sheet cladding and as per tender specification. The scope of work includes all fittings insulation, accessories & consumables etc.,.

-

-

-

... More
100 mm dia x 50mm thick

-

-

-

... More
80 mm dia x 50mm thick

-

-

-

... More
Supply, installation, testing and commissioning of chilled water piping insulation with fire inhibiting, Class 'O', closed cell nitrile rubber pre-formed pipe sections of 40 kg/cum density, insulation surface wrapped with polythene vapour barrier and finally covered with 26g Aluminium Sheet cladding and as per tender specification. The scope of work includes all fittings insulation, accessories & consumables etc.,.

-

-

-

... More
100 mm dia x 25mm thick

-

-

-

... More
80 mm dia x 25mm thick

5

-

-

... More
65 mm dia x 25mm thick

-

-

-

... More
50 mm dia x 25mm thick

15

-

-

... More
40 mm dia x 25mm thick

15

-

-

... More
32 mm dia x 25mm thick

15

-

-

... More
25 mm dia x 25mm thick

15

-

-

... More
Non Return Valves

-

-

-

... More
Supply and installation of Non Return valves, including fitting, bolts, nuts, gaskets, valve thermal insulation, consumables and etc.,

-

-

-

... More
80 mm

3

-

-

... More
Slim seal butterfly valves

-

-

-

... More
Supply and installation of butter-fly valves, including fitting, bolts, nuts, gaskets, valve thermal insulation, consumables and etc.,

-

-

-

... More
100 mm dia

2

-

-

... More
80 mm dia

-

-

-

... More
65 mm dia

-

-

-

... More
50 mm dia

-

-

-

... More
Ball Valves

-

-

-

... More
Supply and installation of ball valves, including fitting, bolts, nuts, gaskets, valve thermal insulation, consumables and etc.,

-

-

-

... More
40 mm dia

1

-

-

... More
32 mm dia

5

-

-

... More
25 mm dia

1

-

-

... More
Balancing valves

-

-

-

... More
Supply and installation of flanged type semi-automatic / automatic balancing valves complete with companion flanges. The scope includes providing of gaskets, bolts, nuts, valve thermal insulation, consumables and balancing the system using manufacturers computer module at his own cost.

-

-

-

... More
80 mm dia

3

-

-

... More
65 mm dia

2

-

-

... More
50 mm dia

1

-

-

... More
40 mm dia

1

-

-

... More
32 mm dia

1

-

-

... More
Y- Strainer

-

-

-

... More
Supply and installation of Y-Strainers, including fittings, bolts, nuts, gaskets, Strainer thermal insulation, consumables and etc., The strainer basket should be of brass / SS perforated sheet with magnetic plug at bottom to arrest the metal particles.

-

-

-

... More
80 mm dia

3

-

-

... More
65 mm dia

2

-

-

... More
50 mm dia

1

-

-

... More
40 mm dia

1

-

-

... More
32 mm dia

1

-

-

... More
2-way Modulating Valves

-

-

-

... More
Supply and installation of 2 - way modulating control valve with proportionate actuators. The scope includes providing of necessary machine made threaded nipples/ SORF flanges, bolts, nuts, gaskets, valve thermal insulation, and consumables etc.

-

-

-

... More
50 mm dia

2

-

-

... More
40 mm dia

1

-

-

... More
32 mm dia

1

-

-

... More
25 mm dia

1

-

-

... More
HUMIDIFIERS

-

-

-

... More
Supply, Installation, Testing and Commissioning of Pan Type Humidifier made out of 2 mm SS-304 sheet and tank to be adequately sized based on KW capacity. The Humidifier comprise of connection for make-up water, over flow and drain, sight glass on the tank to see inside the tank, inside marine light, Electrical panel, top of tank provided with nozzle for the outlet of steam,

-

-

-

... More
top of the tank is openable with sufficient numbers of nuts and bolts as per standards. Humidifier is air tight and leak proof and insulated with fibre glass & finished with 26gauge aluminium cladding sheet. Electrical panel is made out of 16 gauge CRCA sheet both sides powder coated, electrical panel consist of MCB, Contractor, low water level cut-out, heating thermostat for individual bank, high temperature cut-off, humidistat, fault indicating lamp, heaters etc. and internally wired.

-

-

-

... More
Humidifier capacity 10 kW (12.82 kg/hr saturated steam)

1

-

-

... More
Humidifier capacity 5 kW (6.41 kg/hr saturated steam)

1

-

-

... More
HOT WATER SYSTEM

-

-

-

... More
Hot Water Calorifier

-

-

-

... More
Supply, Installation, Testing and Commissioning of Electric Hot Water Calorifier ( Hot Water Generator). Hot water calorifier to be of Stainless Steel construction complete with vertical type shell, dished ends, all accessories and as per tender specifications. The calorifier is Insulated with 50 mm thick, 48Kg/cum density mineral wool insulation and covered by 26G aluminium sheet. The scope of works are complete with Electrical panel, metering devices, inside power & control wiring, digital thermostat, Thermometers, Pressure gauges , control panel etc., and as per tender specification.

-

-

-

... More
Hot Water Calorifier Capacity 50 kW

1

-

-

... More
Hot Water Pumps

-

-

-

... More
Supply, installation, testing and commissioning of Horizontal back pull-out / Vertical Inline Hot water pump (normal temperature 50 deg C and maximum temperature 80 deg C) and should comprise of CI body, bronze impeller, mechanical seal, 4 pole, TEFC motor (IP:55)of EFF1-class, MS base frame for pump, drive assembly including providing of floating pedestals, vibration isolation neoprene pads & thermal insulation for pumps, all the other necessary work and as per tender specification. Pump performance curves shall be submitted for Engineer-in-charge approval prior to manufacture.

-

-

-

... More
Flow: 2.4 l/s cap. & 30m head

2

-

-

... More
Make-up Tank

-

-

-

... More
500 lts capacity Make-up tank (for hot water generator) of HDPE material complete with Makeup connection, Quick fill, outlet connection, drain with valve, overflow connection, air-vent, brass ball float valve etc. along with necessary Structural supporting arrangement.

1

-

-

... More
Flexible Expansion Joints

-

-

-

... More
Supply and installation of Rubber flexible expansion joints and as per tender specification. The scope includes all accessories, fittings, bolts& nuts and consumables.

-

-

-

... More
50 mm dia. for Hot water pumps

4

-

-

... More
HOT WATER PIPING :

-

-

-

... More
MS 'C' class Piping

-

-

-

... More
Hot water piping with Class - C, ERW - MS Pipes. The scope includes supply of pipes, heavy gauge necessary fittings, flanges, bolts & nuts, supports, supporting self threaded rods and consumables etc.,

-

-

-

... More
50 mm dia

-

-

-

... More
40 mm dia

15

-

-

... More
32 mm dia

15

-

-

... More
Hot Water Piping Insulation

-

-

-

... More
Supply, installation, testing and commissioning of hot water piping insulation with 50mm thick fire retardant rock wool/ mineral wool insulation of factory made rigid pre-formed pipe sections of 144 kg/cum density, insulation surface wrapped with polythene vapour barrier & 26 g GI chicken wire mesh, finally finished with 26g Aluminium sheet cladding and as per tender specification. The scope of work includes all fittings insulation, accessories & consumables etc.,.

-

-

-

... More
50 mm dia

-

-

-

... More
40 mm dia

15

-

-

... More
32 mm dia

15

-

-

... More
Non Return Valves

-

-

-

... More
Supply and installation of Non Return valves, including fitting, bolts, nuts, gaskets, consumables, valve thermal insulation and etc.,

-

-

-

... More
50 mm(with insulation)

2

-

-

... More
Slim seal butterfly valves

-

-

-

... More
Supply and installation of butter-fly valves, including fitting, bolts, nuts, gaskets, consumables, valve thermal insulation and etc.,

-

-

-

... More
50 mm dia

6

-

-

... More
Ball Valves

-

-

-

... More
Supply and installation of ball valves, including fitting, bolts, nuts, gaskets, consumables, valve thermal insulation and etc.,

-

-

-

... More
40 mm dia

6

-

-

... More
32 mm dia

6

-

-

... More
Balancing valves

-

-

-

... More
Supply and installation of flanged type semi-automatic / automatic balancing valves complete with companion flanges. The scope includes providing of gaskets, bolts, nuts, valve thermal insulation and balancing the system using manufacturers computer module at his own cost.

-

-

-

... More
50 mm dia

1

-

-

... More
40 mm dia

1

-

-

... More
32 mm dia

1

-

-

... More
Y- Strainer

-

-

-

... More
Supply and installation of Y-Strainers, including fitting, bolts, nuts, gaskets, consumables, strainer thermal insulation and etc.,. The strainer basket should be of brass / SS perforated sheet with magnetic plug at bottom to arrest the metal particles.

-

-

-

... More
50 mm dia

2

-

-

... More
40 mm dia

1

-

-

... More
32 mm dia

1

-

-

... More
3-way Modulating Valves

-

-

-

... More
Supply and installation of 3 - way modulating control valve with proportionate actuators. The scope includes providing of necessary machine made threaded nipples/ flanges, bolts, nuts, gaskets, consumables, valve thermal insulation and etc.

-

-

-

... More
32 mm dia

1

-

-

... More
25 mm dia

1

-

-

... More
CONDENSATE DRAIN WATER PIPING

-

-

-

... More
Supply, installation, testing and commissioning of condensate drain Piping made out of MS Class - C pipe with fire inhibiting 25mm thick, Class 'O', closed cell nitrile rubber pre-formed pipe sections of 40 kg/cum density,

-

-

-

... More
insulation surface wrapped with polythene vapour barrier and finally covered with 26g Aluminium Sheet cladding and as per tender specification. The scope of work includes all fittings insulation, accessories & consumables etc.,.

-

-

-

... More
65 mm dia

25

-

-

... More
40 mm dia

5

-

-

... More
32 mm dia

12

-

-

... More
MISCELLANEOUS ITEMS:

-

-

-

... More
100 mm dia weather proof (IP-65) stainless steel Pressure gauges complete with dampening liquid, SS- siphon with needle valve. The gauges should have an accuracy of ± 1% of FS.

-

-

-

... More
100 mm dia weather proof (IP-65) dial type mercury filled stainless steel thermometers with dampening liquid with an accuracy of ± 1% of FS.

-

-

-

... More
Automatic purge valves

-

-

-

... More
Water flow switches ( 0 - 10 kg/sqcm)

3

-

-

... More
20mm dia Ball Valves for coil drains

-

-

-

... More
Controller & Sensor for measuring return air Temperature & RH and giving feed back signal to actuator to operate. Scope includes field power & control wiring.

2

-

-

... More
Controller cum Sensor for measuring return air Temperature. Scope includes field power & control wiring.

2

-

-

... More
Air- flow (mass flow) transmitter to measure the air flow rate in supply air duct and give the feed back signal to VFD to regulate fan speed based on inside conditions. The scope includes all accessories like up & down stream air pressure measuring sensing steel tubes with orifices, connected PVC tubing, field power & control wiring and etc.,.

4

-

-

... More
Duct Smoke Detector: Duct smoke detector with necessary IRMs (Interposing relay Modules) which is being linked by LOR of FAS system. Scope includes field power & control wiring.

4

-

-

... More
AIR HANDLING EQUIPMENTS

-

-

-

... More
FOR ISO 8 CLEAN ROOM

-

-

-

... More
Supply, Installation, Testing and Commissioning of Modular double skin floor mounted Air Handling Unit made with 24g GI pre-coated outer skin & 22g GI plain inner skin with 50mm thick PUF insulation of 38 +/- 2 kg/m3 density as in-fill material between the skins and profiles are of extruded aluminium thermal break coving profiles. The unit comprise of air intake section with fresh air and return air dampers, mixing chamber, pre-filter section EU-4(10µ) synthetic media flange type washable pre- filters, fine filter section EU-5 (5µ) pocket fine filters with flange arrangement, coil section with chilled water coil & hot water coil and 25mm thick nitrile rubber insulated 18gauge SS-316 drain pan, humidification section with steam nozzles arrangement,

-

-

-

... More
fan section with high performance imported spark proof DIDW centrifugal fan with backward curved aerofoil blades, drive arrangement with taper lock pulleys & V-belts, Energy Efficient EFF1- class VFD compatible TEFC squirrel cage induction motor of MG-31 grade, motor to be dual coated winding wire & Vacuum Pressurised Impregnation (VPI), frame shall be one size higher & insulated bearing at non drive end, bleed-off chamber with bleed-off damper and synthetic media EU-4(10µ) flanged type washable filter arrangement, 2nd stage Fine filter section with EU-9(1µ) pleated type fine filters & flange arrangement and supply air plenum section with outlet damper. All dampers are of extruded aluminium aerofoil design low leakage type suitable for Motorized/ Manual operation, Suitable range magnehellic gauges are to be provided across EU-4, EU-5 & EU-9 filters to measure resistance.

-

-

-

... More
Inspection doors: For filter sections, Coil sections and fan section.

-

-

-

... More
Wire guard & vision panel inbuilt access door for fan section, Inspection lamp & door limit switch are to be provided for fan, EU-4, EU-5 & EU-9 filter sections.

-

-

-

... More
AHU-1 : 23000cfm, 150mm WC st.pr., 6 row Ch.W & 2row H.W.coil

1

-

-

... More
FOR CONTROLLED & UNCLASSIFIED AREA

-

-

-

... More
Supply, Installation, Testing and Commissioning of Modular double skin floor mounted Air Handling Unit made with 24g GI pre-coated outer skin & 22g GI plain inner skin with 50mm thick PUF insulation of 38 +/- 2 kg/m3 density as in-fill material between the skins and profiles are of extruded aluminium thermal break coving profiles. The unit comprise of air intake section with fresh air and return air dampers, mixing chamber, pre-filter section EU-4(10µ) synthetic media flange type washable pre- filters, fine filter section EU-5 (5µ) pocket fine filters with flange arrangement, coil section with chilled water coil & hot water coil and 25mm thick nitrile rubber insulated 18gauge SS-316 drain pan, humidification section with steam nozzles arrangement,

-

-

-

... More
fan section with high performance imported spark proof DIDW centrifugal fan with backward curved aerofoil blades, drive arrangement with taper lock pulleys & V-belts, Energy Efficient EFF1- class VFD compatible TEFC squirrel cage induction motor of MG-31 grade, motor to be dual coated winding wire & Vacuum Pressurised Impregnation (VPI), frame shall be one size higher & insulated bearing at non drive end, bleed-off chamber with bleed-off damper and synthetic media EU-4(10µ) flanged type washable filter arrangement, 2nd stage Fine filter section with EU-9(1µ) pleated type fine filters & flange arrangement and supply air plenum section with outlet damper. All dampers are of extruded aluminium aerofoil design low leakage type suitable for Motorized/ Manual operation, Suitable range magnehellic gauges are to be provided across EU-4, EU-5 & EU-9 filters to measure resistance.

-

-

-

... More
Inspection doors: For filter sections, Coil sections and fan section.

-

-

-

... More
Wire guard & vision panel inbuilt access door for fan section, Inspection lamp & door limit switch are to be provided for fan, EU-4, EU-5 & EU-9 filter sections.

-

-

-

... More
AHU-2 : 9000cfm, 110mm WC st.pr., 6 row Ch.W & 2row H.W.coil

1

-

-

... More
TREATED FRESH AIR UNIT

-

-

-

... More
Supply, Installation, Testing and Commissioning of Modular double skin floor mounted Air Handling Unit made with 24g GI pre-coated outer skin & 22g GI plain inner skin with 50mm thick PUF insulation of 38 +/- 2 kg/m3 density as in-fill material between the skins and profiles are of extruded aluminium thermal break coving profiles. The unit comprise of air intake section with fresh air damper, mixing chamber, pre-filter section EU-4(10µ) synthetic media flange type washable pre- filters, fine filter section EU-5 (5µ) pocket type fine filters with flange arrangement, coil section with chilled water coil and 25mm thick nitrile rubber insulated 18gauge SS-316 drain pan,

-

-

-

... More
fan section with high performance imported spark proof DIDW centrifugal fan with backward curved aerofoil blades, drive arrangement with taper lock pulleys & V-belts, Energy Efficient EFF1- class VFD compatible TEFC squirrel cage induction motor of MG-31 grade, motor to be dual coated winding wire & Vacuum Pressurised Impregnation (VPI), frame shall be one size higher & insulated bearing at non drive end and supply air plenum section with outlet damper. All dampers are of extruded aluminium aerofoil design low leakage type suitable for Motorized/ Manual operation, Suitable range magnehellic gauges are to be provided across EU-4 & EU-5 filters to measure resistance.

-

-

-

... More
Inspection doors: For filter sections, Coil sections and fan section.

-

-

-

... More
Wire guard & vision panel inbuilt access door for fan section, Inspection lamp & door limit switch are to be provided for fan, EU-4, EU-5 & EU-9 filter sections.

-

-

-

... More
AHU-3 : 3000cfm, 70mm WC st.pr., 8 row Ch.W.coil

1

-

-

... More
FOR COMFORT AIR-CONDITIONING

-

-

-

... More
Supply, Installation, Testing and Commissioning of Modular double skin floor mounted Air Handling Unit made with 24g GI pre-coated outer skin & 24g GI plain inner skin with 50mm thick PUF insulation of 38 +/- 2 kg/m3 density as in-fill material between the skins and profiles are of extruded aluminium thermal break coving profiles. The unit comprise of air intake section with fresh air and return air dampers, mixing chamber, pre-filter section with 50mm thick synthetic media EU-4(10µ) flanged type washable filter arrangement, coil section with chilled water coil and 25mm thick nitrile rubber insulated 18gauge SS-304 drain pan, fan section with high performance imported spark proof DIDW centrifugal fan with backward curved aerofoil blades, drive arrangement with taper lock pulleys & V-belts, Energy Efficient EFF1- class VFD compatible TEFC squirrel cage induction motor of MG-31 grade,

-

-

-

... More
motor to be dual coated winding wire & Vacuum Pressurised Impregnation (VPI), frame shall be one size higher & insulated bearing at non drive end, and supply air plenum section with outlet damper. All dampers are of extruded aluminium aerofoil design low leakage type suitable for Motorized/ Manual operation.

-

-

-

... More
Inspection doors: For filter sections, Coil sections and fan section.

-

-

-

... More
Wire guard & vision panel inbuilt access door for fan section, Inspection lamp & door limit switch are to be provided for EU-4 and fan sections.

-

-

-

... More
Ground Floor

-

-

-

... More
AHU-4 : 2000cfm, 60mm WC st.pr., 6 row Ch.W.coil

1

-

-

... More
HI-WALL/ CASSETTE TYPE SPLIT UNITS

-

-

-

... More
Supply, Installation, Testing and Commissioning of Hi-wall/ Cassette type split unit. The Evaporator Unit (Indoor Unit) consist of evaporator coil, evaporator fan, fan motor, coarse filters housed in a sheet metal casing complete with vibration isolators suitable for wall mounting and cordless remote. The condensing unit (Outdoor Unit) consist of Hermetically Sealed Inverter Compressor, Condenser Coil, Fan, Fan-motor, casing supporting stand, drive guard, vibration isolation pads, etc.

-

-

-

... More
Interconnecting refrigerant piping and electrical wiring up to 10 mtr, controls, MS pre-painted stand for outdoor unit and electronic control circuit.

-

-

-

... More
1.5 TR - HW Split unit (5-star rated units as per BEE)

2

-

-

... More
2.0 TR - HW Split unit (5-star rated units as per BEE)

16

-

-

... More
3.0 TR - Cassette type Split unit (5-star rated units as per BEE)

5

-

-

... More
VENT. UNIT- EXHAUST INLINE FANS

-

-

-

... More
Supply, Installation, Testing and Commissioning of single skin cabinet type ceiling suspended inline fans. The unit comprise of air intake section with provision for connecting duct, fan section with imported backward curved centrifugal fan, drive set, Energy efficient EFF1 - class TEFC squirrel cage induction motor, Air outlet with provision for connecting exhaust duct. Access door to be provided for fan section.

-

-

-

... More
VEU-1 : 500cfm,25mm of WC st.pr. (for Change Room)

1

-

-

... More
AIR DISTRIBUTION SYSTEM

-

-

-

... More
Air filtration system

-

-

-

... More
Minipleat Hooded type HEAP filters

-

-

-

... More
Supply and installation of hooded type minipleat terminal HEPA Filters of EU-14 grade, 99.995% efficiency down to 0.3µ particle with seamless food grade neoprene gasket and filter media depth not less than 92mm. The scope includes providing of aluminium foil faced 25mm thick circular flexible duct, circular fixing clamps and filter fixing clamps etc.

-

-

-

... More
610 X 610 X 133 mm

50

-

-

... More
450 X 450 X 133 mm

1

-

-

... More
RETURN AIR RISER

-

-

-

... More
Supply and installation of civil wall embedded Return Air Raisers made of 16g CRCA sheet epoxy based powder coated sheet with 500mm projection at the top of ceiling. The riser top end provided flange connections to connect Ducting and bottom front fascia to be provided with 1.2mm thick GI powder coated perforated grills. The scope includes necessary stiffeners, permanent magnet/ mechanical holding system to hold the perforated grills on Risers, brackets to install risers in civil wall and fixing screws etc.

5

-

-

... More
DUCTING

-

-

-

... More
Supply, fabrication, installation and testing of following sizes of GI sheet metal ducting of Lock Forming Quality(LFQ), continuous galvanized with Zinc coating of 120 gsm, sheets conforming to IS-277-2003, complete with GI supports, pre-painted angle iron flanges for all sizes of ducts, neoprene gaskets for all transverse joints, splitter dampers, tees, reducers, elbows etc.,

-

-

-

... More
All transverse & longitudinal joints to be sealed with food grade silicon sealants. The main ducts before making a provision for branches are leak tested at a minimum of 75mm of WC static pressure with duct leak test rig and leakage rates are to be with in SMACNA testing limits(should be with in 3%).

-

-

-

... More
24 G, 0.63 mm thick

-

-

-

... More
22 G, 0.80 mm thick

-

-

-

... More
20 G, 1.00 mm thick

25

-

-

... More
AIR CONTROL DEVICES

-

-

-

... More
SUPPLY AIR JET DIFFUSERS

-

-

-

... More
Supply and installation of hi-flow Jet Nozzles / Diffusers with mounting plate. The diffuser / nozzle manufactured from extruded aluminium and comprise of circular multi-cone Jet diffuser/ nozzles, easy to install, adjust, reversible core to produce long throw jet or short throw diffuser patterns, core rotatable through 360 degrees for eyeball jet direction, jet may be deflected off axis by up to 15 degrees and total Jet nozzle / diffusers are powder coated to match to the ceiling colour. The scope includes hardware, consumables, silicon sealants and gaskets.

-

-

-

... More
315mm dia. with mounting plate

45

-

-

... More
HEPA MODULES

-

-

-

... More
Supply and installation of factory made GI powder coated 1.2mm thick HEPA modules. The module is mounted on modular ceiling panel cut-outs, construction is suitable to mount Hooded HEPA filter from top and down stream side should have provision to fix Hi-flow Jet Nozzle / Diffuser mounting plate. The scope includes hardware, consumables, silicon sealants and gaskets.

-

-

-

... More
Size: 630mm(L) x 630mm(W) x 250mm(H)

45

-

-

... More
SUPPLY AIR DIFFUSERS

-

-

-

... More
Supply and installation of removable core, Al. Powder Coated anti-smudge ring/ tegular type Supply/ Return Air Ceiling Diffuser with internally operated extruded aluminium pre-painted volume control damper.

5

-

-

... More
RETURN AIR DIFFUSERS

-

-

-

... More
Supply and installation of removable core, Al. Powder Coated anti-smudge ring/ tegular type Supply/ Return Air Ceiling Diffuser without collar damper.

5

-

-

... More
GRILLS

-

-

-

... More
Supply and installation of removable core, Al. Powder Coated Supply/ Return Air grilles without collar damper.

-

-

-

... More
RETURN AIR RISER GRILLES

-

-

-

... More
Supply and installation of GI powder coated perforated grill of 1.2mm thick with capsulation perforations for return air pick-ups

-

-

-

... More
DAMPERS

-

-

-

... More
Supply and installation of Extruded Aluminium Aerofoil Design Low Leakage Volume Control Dampers suitable for Motorised / Manual operation and as per tender specification.

-

-

-

... More
Round shape factory made butter-fly dampers of 22g GI casing and 20 g GI blades of low leakage arrangement, with brass bushes for damper shaft for easy & rust free operation and damper should have proper locking arrangement with Open / Close position marking. One side should be provided with 2mm thick GI/MS pre-painted & minimum 25mm wide flanges arrangement and other side should be provided with collar arrangement to fix up flexible duct. DOP port with washers & dummy nuts to be provided on damper casing. sizes : 350mm, 300mm & 250mm dia to suit to hooded type HEPA filters

-

-

-

... More
300mm dia.

50

-

-

... More
250mm dia.

5

-

-

... More
FIRE DAMPERS

-

-

-

... More
Supply and installation of fusible link type fire damper of 16g GI casing & blades construction and suitable for both manual / motorized operation and fire rated for 90 minutes as per UL-555.

-

-

-

... More
Motorized actuator with control panel for dampers operation, power & control wiring and to be compatible for BMS operation.

-

-

-

... More
for 0.8 m2

2

-

-

... More
for 0.8 m2 and 2.3m2

1

-

-

... More
FRESH AIR INTAKE/ EXHAUST AIR LOUVERS

-

-

-

... More
Supply and installation of Extruded Aluminium fresh/ exhaust air rain protection louvers with bird screen & 20µ pre-filter and includes 16gauge GI powder coated casing arrangement in the civil wall.

2

-

-

... More
GI COWL PIECES FOR FRESH AIR INTAKE/ EXHAUST AIR OUTLET

-

-

-

... More
Supply and installation of 22 gauge GI fresh/ exhaust air rain protection cowl pieces with bird screen arrangement.

2

-

-

... More
MAGNEHELIC GAUGES

-

-

-

... More
Magnehelic gauge of range 0-6mm WC

6

-

-

... More
CRCA powder coated gauge box to house the magnehelic gauge with SS304 cover on the top.

6

-

-

... More
CLEANROOM DUCTS THERMAL INSULATION

-

-

-

... More
Supply and fixing of Insulation material either cross linked polyethylene or polyfin with one side Aluminium foil facing conforming to class 'O' standard. The scope includes supply of SR-998 adhesive, manufacturer recommended adhesive tapes and consumables etc.

-

-

-

... More
19 mm thick for supply air duct

-

-

-

... More
13 mm thick for return air duct

-

-

-

... More
EXPOSED CEILING UNDER DECK THERMAL INSULATION

-

-

-

... More
Supply and fixing of Insulation material either cross linked polyethylene or polyfin with one side Aluminium foil facing conforming to class 'O' standard. The scope includes supply of SR-998 adhesive, manufacturer recommended adhesive tapes and consumables etc.

-

-

-

... More
19 mm thick for exposed ceiling

-

-

-

... More
TESTING & VALIDATION (With Third Party)

-

-

-

... More
Testing & Validation of Clean room as per FDE Std 209E & ISO-14644 (Velocity, Particle count, temp, RH, filter integrity tests and all applicable tests related to electronics industry which includes charges of third party to be carried out at site).

1

-

-

... More
SUBHEAD - II:CLEANROOM INTERIORS

-

-

-

... More
WALL PANELS

-

-

-

... More
Supply and installation of double skin modular wall panel system made of 0.8 mm thick Powder coated GPSP sheet on both sides over an aluminium frame work with sealed and insulated interior, PUF as a infill material of density 40 ± 2 kg/m3 is sandwiched between the two skins and sealed from the exterior by the aluminium frame work, GI floor profiles with levelling adjustment are provided for reinforcement along the periphery and accommodate the Epoxy/ vinyl floor flush with wall panels. The wall panels are constructed with an interior Aluminium frame work for self supporting. Partition to Partition connections are maintained with precision with aluminium profiles that create uniform seams. wall panels are inter changeable with doors & vision Panel, special fasteners and profiles are provided for easily dismantable. The Partition seams are sealed by food grade silicone with a perfectly flush finishing. Both sides of panels provided with protective film to prevent surface damage during shipping and installation.

-

-

-

... More
50mm thick wall panels

-

-

-

... More
100mm thick wall panels

-

-

-

... More
VIEW PANELS

-

-

-

... More
Supply and installation of view / glazed panels with flush design. The view panels provided with 6mm thick float glass on both sides with flush design, necessary gaskets, food grade silicon sealants and all required accessories.

2

-

-

... More
Size: 1000mm (W) x 1000mm (H)

-

-

-

... More
IN-BUILT RETURN AIR RISERS

-

-

-

... More
Supply and installation of In-built Return Air Raisers made of 1mm thick GPSP sheets in 100mm thick wall panels with 150mm projection at the top of ceiling. The scope includes necessary stiffeners, flange connections to connect Ducting, permanent magnet/ mechanical holding system to hold the perforated grills on Risers, fixing screws etc.

-

-

-

... More
WALKABLE CEILING

-

-

-

... More
Supply and installation of 50mm thick double skin totally flush walk-able false ceiling made of 0.8mm thick powder coated GPSP sheet on both side over an aluminium frame work with sealed and insulated interior, PUF as a infill material of density 40 ± 2 kg/m3 is sandwiched between the two skins and sealed from the exterior by the aluminium frame work. The ceiling panel system comprise of aluminium ceiling grid suitable for easy installation, load bearing, flushed to the ceiling panels, Indexing screws for easy mounting of the system, reinforcing clamps and brackets, turn buckles & threaded rods are fastened to the overhead support at fixed intervals and other hardware for easy & faster levelling of the system etc.,.

-

-

-

... More
All the suspension material is of Galvanized finish. Panel to Panel connections are maintained with precision with aluminium profiles that create uniform seams. The Partition seams are sealed by food grade silicone with a perfectly flush finishing. Both sides of panels provided with protective film to prevent surface damage during shipping and installation.

-

-

-

... More
DOORS

-

-

-

... More
Supply and installation of 46 mm thick both side flush doors made of 0.8 mm thick PU painted GPSP sheet with PUF as a infill material of density 40 ± 2 kg/m3 is sandwiched between the two skins, 1.2 mm thick standard 50mm frame width GPSP powder coated door frames totally flush with the wall panels, necessary hardware like stainless steel hinges, stainless steel 'D' type of handles on pull side, stainless steel push plates on push side, Dorma TS 71door closure, double glazed view glass of standard size with self adhesive tape & food grade silicon sealant, SS ball bearing butt hinges and concealed automatic door bottom seal etc

-

-

-

... More
Single Leaf Door size: 900mm (W) x 2200mm (H)

5

-

-

... More
Double Leaf Door size: 1800mm (W) x 2200mm (H)

1

-

-

... More
Emergency Single Leaf Door size: 1000mm (W) x 2200mm (H)

1

-

-

... More
Supply and installation of 2-Door Interlocking system of electromagnetic type including necessary accessories, controls and field wiring.

2

-

-

... More
COVING

-

-

-

... More
Supply and installation of extruded aluminium powder coated clip on type covings.

-

-

-

... More
R 70 coving for wall to wall and wall to ceiling

-

-

-

... More
3D Internal/ External corner coves

-

-

-

... More
CLEANROOM LIGHTING

-

-

-

... More
Walk-able ceiling mounted high-bay LED Light Fixtures

-

-

-

... More
Supply of top access high bay positioning energy efficient clean room LED light fixtures suitable to fix on walk-able ceiling panels. The fixture is made of powder coated aluminium pressure die cast housing, mounting eye bolt, LED Lamps, electronic chokes, lighting reflectors, internal wiring, toughened and shatter-proof quality glass cover and necessary accessories etc.,. The Light fixture is best energy-efficiency of minimum 130 lm/W, comfortable light CRI of 80, optimal lighting effects reduce 20% glare, robust & reliable 4KV surge protection, IP66 certified & IK08 classification and life time of 50K hours and suited for ambient temperature up to 45 deg.C , system lumen 15500 Lm, industry application and EMC/EMI compliant. The light fixture is provided toughened glass of 5mm thick on bottom suitable to fix in the ceiling panel cut-outs and fixed on panels with double side adhesive tape , silicon sealant and required to ensure zero air leakage from cleanroom.

-

-

-

... More
a)120 watts, 130 Lm/W, LED Light Fixtures ( Equivalent to Phillips BY325P-15500 Lm model)

18

-

-

... More
b) 33 W LED luminaire Recess Mounted 2ft x 2ft LED Luminaire with Diffuser similar to Wipro Cat No: CRCO10R036HP57G1/ Philips Cat No: FULL GLOW G4 RC380B LED36S -6500 G4 L60 W60 PSU OD.

5

-

-

... More
c) 38.5 W LED Channel similar to Wipro Cat No: LE10-491-XXX-57HCSL X Line / Philips Cat No: BN 108 LED 40S CDL PSU.

20

-

-

... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

43

-

-

... More
PASS BOX

-

-

-

... More
Supply, installation, testing and commissioning of static pass box made of 1.6mm thick SS-304 (No.4 finish). The pass box comprised of material pass through chamber with double side SS doors, view panels on both doors, SS handle, 'P' seal between door & frame and mechanical door interlocking.

-

-

-

... More
Size: 1200mm(W) x 1200mm(D) x 1200mm(H)

1

-

-

... More
AIR SHOWERS

-

-

-

... More
Supply, installation, testing and commissioning of air shower made of 16 gauge GPSP sheet powder coating on both sides and working area of 1800mm(W) x 950mm (D) x 1960mm (H). The air shower comprise return air collection at bottom with EU-4 pre-filter & perforated GI powder coated grill, fan with adequate static pressure & EFF-1 class motor, HEPA filter section with EU-13/14 grade HEPA filters of 99.995% efficiency down to 0.3µ particles, air outlet chamber with SS air nozzles and air velocity through nozzles to be 20- 22 m/s to ensure efficient scrubbing action necessary to remove particulate matter , vinyl flooring with conductive and antistatic properties,

1

-

-

... More
clearnoom compatible Doors with sandwich type construction, view panels and light fixture, microprocessor controller to supervise all functions, emergency stop buttons on both sides of shower, indicator lights on both sides of shower exterior to control traffic flow in & out of cleanroom. Air shower is designed to meet minimum of 370 ACPH, minimum of 6 nozzles for proposed working area, fully tested and certified in compliance with ISO 5 class as per ISO -14644- 2&3 and IES-RP-CC-002-86.

-

-

-

... More
VINYL FLOORING

-

-

-

... More
Supply, installation, testing and commissioning of 2mm thick ESD vinyl tile conductive flooring. The floor material should have both conductive and antistatic properties, floor itself not generate more than 100 volts when a person walks across the floor irrespective of person's shoes, electrical resistance of floor should be below 100 mega-ohms or 1 x 108 ohms, carpet with electrical resistance below 1 x 107 performs best. The electrical properties are to be verified at low (less than 20 percent) relative humidity. The floor should passes the “Roller Caster Electrical Test” or CET. The scope includes conductive glue/ adhesive for fixing the tiles, weld chord, tools & tackles, consumables required for laying the floor.

-

-

-

... More
CLEANROOOM FURNITURE & ANCILLARY ITEMS

-

-

-

... More
CROSS OVER BENCH

-

-

-

... More
Supply and Installation of cross over bench made up of 10 mm thick PP sheets fully fixed in the designated place in the change room, with heat welding bottom of bench will have pigeon holes for keeping day Shoes/ CR sleepers of equival size 250mm x 182mm in 2 rows.

-

-

-

... More
size: 300mm W x 400mm H x 1800mm L

1

-

-

... More
size: 300mm W x 400mm H x 1300mm L

1

-

-

... More
SHOE RACK

-

-

-

... More
Supply and Installation of Shoe Rack is made up of 10mm thick PP sheets of size: 600 x600 x 300mm with heat welding having pigeon holes for keeping the un-cleaned shoes etc., complete.

1

-

-

... More
GARMENT CUBICLE

-

-

-

... More
Supply and Installation of Garment cubicle compatible for ISO class 8 cleanroom is made up of 1.2mm thick SS-304 sheet material for keeping minimum 15 cleanroom garments, sliding doors, glazing, UV light, pre-filter, HEPA filter and Blower for re-circulation of air, complete ready to use.

2

-

-

... More
LOCKERS

-

-

-

... More
Supply and Installation of Lockers for keeping personal belongings compatible for ISO class 8 cleanroom is made up of 1.2mm thick SS-304 sheet material and minimum of 20 cubicles with lock and key arrangement.

1

-

-

... More
TACKY MAT

-

-

-

... More
Supply and Installation of Tacky mat of size 1.0m (L) x 1.2m (W) x 7mm thick (protectomat) before Air-shower.

2

-

-

... More
SUB HEAD - III :ELECTRICAL FOR AIRCONDITIONING/CLEANROOM

-

-

-

... More
M.C.C. PANELS

-

-

-

... More
Supply, installation, Testing and Commissioning of 3 phase and Neutral 415V 4 wire Free Standing Floor mounted double door MVpanel with canopy made out of 2mm thick MS sheet after seven tank process and painting with Epoxy powder coating with the following switchgear and metering equipments as per single line diagram and technical specifications . The panel shall consist of suitable rating FP Aluminium busbar (at the rating of 0.8A/Sq.mm) supported with DMC/ SMC insulators and color coded with Heat shrinkable sleeves.The Metering shall be provided as specified. The panel shall have Short circuit withstanding capacity of minimum 50KA and consist of the switchgear as mentioned below. The panel shall be got fabricated from manufacturers with CPRI Test certificate only. The PCC shall have atleast two spare cubicles of the maximum rating. The size of all Panel Mounting Meters shall be 96X96mm. The Panels shall be mounted on U channels/ brick pedestal including supply and fixing of the same.

1

-

-

... More
MAIN PANEL-1 (For Chillers)

-

-

-

... More
INCOMING FEEDER

-

-

-

... More
1 Set of 630 AMP, 50KA, 4P ACB with EDO copper bus bar, sufficient space for incoming & outgoing cables termination, necessary power & control wiring, Digital voltmeter, Digital ampere meter and current transformer, RYB indicator, ON/OFF/TRIP Indicating lamps, 6A SP control MCB's etc

-

-

-

... More
OUTGOING FEEDERS

-

-

-

... More
3 Set of 125 AMP,25KA, FP MCCB with ROM (for Chillers)

-

-

-

... More
3 Sets of 25 AMP, 10KA, FP MCB (for chilled water pumps)

-

-

-

... More
1 Set of 125 AMP,25KA FP MCCB with ROM (for Hot Water Generator), sufficient space for incoming & outgoing cables termination, potential free contacts for BMS integration, necessary power, control wiring & ON/OFF/TRIP Indicating lamps etc .

-

-

-

... More
2 Sets of 16 AMP, 10KA, FP MCB along with 2.2 kW / 3.0 HP DOL starter & suitable VFD (for Hot Water Pumps), Contactors, Overload Relay, Start / Stop Push Button with NO/ NC Elements On / Trip Indicating lamp, Auto/ Manual Switch, SPP, under voltage protection, necessary power & control wiring, potential free contacts for BMS integration (Trip status, Auto/ Manual Status, On/ Off Command ) etc .

-

-

-

... More
1 Set of 160 AMP,25KA, FP MCCB with ROM ( for AHUs & cleanroom Equipment)

-

-

-

... More
1 Set of 16 AMP,10KA FP MCB (for Pressurisation Unit)

-

-

-

... More
63A, 25KA FP MCCB with TVSS - 1set

-

-

-

... More
1 Lot of control wiring.1 Set of designation plates.

-

-

-

... More
Two numbers 50mm X 6mm GI earthing terminals - one on each side of the panel with earth strip run inside the panel

-

-

-

... More
MAIN PANEL-2 (at AHU Room)

-

-

-

... More
Supply, installation, Testing and Commissioning of 3 phase and Neutral 415V 4 wire Free Standing Floor mounted double door MVpanel with canopy made out of 2mm thick MS sheet after seven tank process and painting with Epoxy powder coating with the following switchgear and metering equipments as per single line diagram and technical specifications . The panel shall consist of suitable rating FP Aluminium busbar (at the rating of 0.8A/Sq.mm) supported with DMC/ SMC insulators and color coded with Heat shrinkable sleeves.The Metering shall be provided as specified. The panel shall have Short circuit withstanding capacity of minimum 50KA and consist of the switchgear as mentioned below. The panel shall be got fabricated from manufacturers with CPRI Test certificate only. The PCC shall have atleast two spare cubicles of the maximum rating. The size of all Panel Mounting Meters shall be 96X96mm. The Panels shall be mounted on U channels/ brick pedestal including supply and fixing of the same.

1

-

-

... More
INCOMING FEEDER

-

-

-

... More
1 Set of 160 AMP, 25KA, 4P MCCB with ROM copper bus bar, sufficient space for incoming & outgoing cables termination, necessary power & control wiring, Digital voltmeter, Digital ampere meter and current transformer, RYB indicator, ON/OFF/TRIP Indicating lamps, 6A SP control MCB's etc

-

-

-

... More
OUTGOING FEEDERS

-

-

-

... More
1 Set of 63 AMP, 16KA, FP MCCB along with 26.0 kW / 35 HP by-pass starter ( star-delta) & suitable VFD (for cleanroom AHU), Contactors, Overload Relay, Start / Stop Push Button with NO/ NC Elements On / Trip Indicating lamp, Auto/ Manual Switch, SPP, under voltage protection, necessary control wiring, potential free contacts for BMS integration (Trip status, Auto/ Manual Status, On/ Off Command ) etc .

-

-

-

... More
1 Sets of 25 AMP,10KA, FP MCB suitable for 10.0 kW (for Pan Humidifier-1),

-

-

-

... More
1 Sets of 6 AMP, 10KA DP MCB suitable for 0.5 kW (for Duct In-line Exhaust Fan)

-

-

-

... More
1 Set of 25 AMP, 10 KA, FP MCB along with 3.7 kW / 5 HP by-pass starter (DOL) & suitable VFD (for cleanroom TFAU), Contactors, Overload Relay, Start / Stop Push Button with NO/ NC Elements On / Trip Indicating lamp, Auto/ Manual Switch, SPP, under voltage protection, necessary power & control wiring, potential free contacts for BMS integration (Trip status, Auto/ Manual Status, On/ Off Command ) etc .

-

-

-

... More
1 Set of 25 AMP, 10KA, FP MCB along with 5.5 kW / 7.5 HP by-pass starter ( DOL) & suitable VFD (for controlled & Unclassified AHU), Contactors, Overload Relay, Start / Stop Push Button with NO/ NC Elements On / Trip Indicating lamp, Auto/ Manual Switch, SPP, under voltage protection, necessary power & control wiring, potential free contacts for BMS integration (Trip status, Auto/ Manual Status, On/ Off Command ) etc .

-

-

-

... More
1 Sets of 16 AMP,10KA,FP MCB suitable for 5.0 kW (for Pan Humidifier-2)

-

-

-

... More
1 Set of 10 AMP, 10KA, FP MCB along with 1.5 kW / 2 HP by-pass starter ( DOL) & suitable VFD (for Comfort A/C AHU), Contactors, Overload Relay, Start / Stop Push Button with NO/ NC Elements On / Trip Indicating lamp, Auto/ Manual Switch, SPP, under voltage protection, necessary power & control wiring, potential free contacts for BMS integration (Trip status, Auto/ Manual Status, On/ Off Command ) etc. All control wiring shall be 2.5 sqmm FRLS copper wire.

-

-

-

... More
1 Set of 125 AMP,16KA FP MCCB with ROM (for cleanroom Equipment & Lighting), sufficient space for incoming & outgoing cables termination, necessary power & control wiring, ON/OFF/TRIP Indicating lamps etc

-

-

-

... More
32A, 25KA FP MCCB with TVSS - 1set

-

-

-

... More
1 Lot of control wiring.1 Set of designation plates.

-

-

-

... More
Two numbers 50mm X 6mm GI earthing terminals - one on each side of the panel with earth strip run inside the panel

-

-

-

... More
POWER PANEL (For Cleanroom Equipment)

-

-

-

... More
Supply, installation, Testing and Commissioning of 3 phase and Neutral 415V 4 wire Free Standing Floor mounted double door MVpanel with canopy made out of 2mm thick MS sheet after seven tank process and painting with Epoxy powder coating with the following switchgear and metering equipments as per single line diagram and technical specifications . The panel shall consist of suitable rating FP Aluminium busbar (at the rating of 0.8A/Sq.mm) supported with DMC/ SMC insulators and color coded with Heat shrinkable sleeves.The Metering shall be provided as specified. The panel shall have Short circuit withstanding capacity of minimum 50KA and consist of the switchgear as mentioned below. The panel shall be got fabricated from manufacturers with CPRI Test certificate only. The PCC shall have atleast two spare cubicles of the maximum rating. The size of all Panel Mounting Meters shall be 96X96mm. The Panels shall be mounted on U channels/ brick pedestal including supply and fixing of the same.

1

-

-

... More
INCOMING FEEDER

-

-

-

... More
1 Set of 125 AMP, 16KA TPN MCCB with ROM copper bus bar, sufficient space for incoming & outgoing cables termination, necessary power & control wiring, Digital voltmeter, Digital ampere meter and Digital Energy meter along with current transformer, RYB indicator, ON/OFF/TRIP Indicating lamps, 6A SP control MCB's etc. All control wiring shall be 2.5 sqmm FRLS copper wire.

-

-

-

... More
OUTGOING FEEDERS

-

-

-

... More
2 Sets of 63 AMP, 10KA, FP MCB

-

-

-

... More
4 Sets of 32 AMP, 10KA FP MCB

-

-

-

... More
28 Sets of 16 AMP, 10KA SP MCB

-

-

-

... More
1 Set of 16 AMP, 10KA FP MCB

-

-

-

... More
1 Lot of control wiring.1 Set of designation plates.

-

-

-

... More
Two numbers 50mm X 6mm GI earthing terminals - one on each side of the panel with earth strip run inside the panel

-

-

-

... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) ( LDB ).

-

-

-

... More
4 way (4 + 12), Double door

1

-

-

... More
Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current breaker with Overload (RCBO), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

-

-

-

... More
40 A, Four Pole, RCBO, 100mA.

1

-

-

... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

-

-

-

... More
5A - 32A, Single pole, MCB, 10kA

24

-

-

... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) ( UPS SUB DBs)

-

-

-

... More
12 way , Double door

1

-

-

... More
Supplying and fixing following rating, double pole, 240 V,MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.

-

-

-

... More
a) 40 A

1

-

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required including SS cover plate compatible for clean room

-

-

-

... More
Group C

15

-

-

... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.

-

-

-

... More
Group C

10

-

-

... More
Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 5 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.including SS cover plate compatible for clean room

5

-

-

... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

-

-

-

... More
a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

850

-

-

... More
b) 4 X 6 sq. mm + 2 X 6 sq. mm earth wire ( LDB )

850

-

-

... More
Supply and fixing of 6 Amps, 5-pin (250 Volts) single phase modular type socket controlled by 6 Amps Switch . The pin configuration shall be round type. with 2runs of 1.1 kV grade FRLS PVC 1.5 Sq.mm & 1 run of 1.5 Sq.mm multi strand Copper wires , run in and including 25 mm dia medium class PVC conduits concealed in wall / ceiling/above false ceiling conforming to IS including all accessories such as junction boxes, conduit bends elbows. (Independent type) including SS cover plate compatible for clean room

20

-

-

... More
Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A, “C” curve, TPMCB, 10kA, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required including SS cover plate compatible for clean room

4

-

-

... More
Supplying and fixing 63 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 63 A, “C” curve, TPMCB, 10kA, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required including SS cover plate compatible for clean room

2

-

-

... More
Supplying and fixing 20A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 16 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. inluding SS cover plate compatible for clean room

28

-

-

... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

-

-

-

... More
a) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

600

-

-

... More
b) 4 X 6 sq. mm + 2 X 6 sq. mm earth wire

850

-

-

... More
c) 4 X 10 sq. mm + 2 X 10 sq. mm earth wire

850

-

-

... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

2

-

-

... More
Supplying and laying 25 mm X 5 mm copper strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50 mm)

40

-

-

... More
Supply and commissioning of following size 1.1KVgrade XLPE insulated armoured aluminium/ copper conductor underground cable. The cable shall conform to IS 1554/ Part 1 .

-

-

-

... More
a) 3.5C X 240 Sq.mm

40

-

-

... More
b) 3.5C X 120 Sq.mm

45

-

-

... More
c) 3.5C X 70 Sq.mm

100

-

-

... More
d) 3.5C X 35 Sq.mm

20

-

-

... More
e) 3.5C X 25 Sq.mm

20

-

-

... More
f) 4C X 16 Sq.mm

20

-

-

... More
g) 4C X 16 Sq.mm Copper cable

40

-

-

... More
h) 3C X 10 Sq.mm Copper cable

60

-

-

... More
i) 3C X 6 Sq.mm Copper cable

40

-

-

... More
j) 3C X 4 Sq.mm Copper cable

20

-

-

... More
k) 4C X 6 Sq.mm Copper cable

20

-

-

... More
l) 4C X 4 Sq.mm Copper cable

20

-

-

... More
m) 4C X 2.5 Sq.mm Copper cable

20

-

-

... More
n) 4C X 1.5 Sq.mm Copper cable

20

-

-

... More
o) 3C X 2.5 Sq.mm Copper cable

60

-

-

... More
p) 3C X 1.5 Sq.mm Copper cable

20

-

-

... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on cable tray as required

-

-

-

... More
a) Upto 35 sq. mm (clamped with 1mm thick saddle)

1010

-

-

... More
b) Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

100

-

-

... More
c ) Above 95 sq. mm and upto 185 sq. mm (clamped with 25/ 40x3mm MS flat clamp)

45

-

-

... More
d ) Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

40

-

-

... More
Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

-

-

-

... More
a) 3½ X 240 sq. mm (62mm)

2

-

-

... More
b) 3½ X 120 sq. mm (45mm)

2

-

-

... More
c) 3½ X 70 sq. mm (38mm)

8

-

-

... More
d) 3½ X 35 sq. mm (32mm)

2

-

-

... More
e) 3½ X 25 sq. mm (28mm)

2

-

-

... More
f) 4 X 16 sq. mm (28mm)

2

-

-

... More
g) 4 X 16 sq. mm (28mm) copper

4

-

-

... More
h) 3 X 10 sq. mm (22mm) copper

6

-

-

... More
i) 3 X 6 sq. mm copper

4

-

-

... More
j) 3 X 4 sq. mm copper

2

-

-

... More
k) 4 X 6 sq. mm copper

2

-

-

... More
l) 4 X 4 sq. mm copper

2

-

-

... More
m) 4 X 2.5 sq. mm copper

2

-

-

... More
n) 4 X 1.5 sq. mm copper

2

-

-

... More
o) 3 X 2.5 sq. mm copper

6

-

-

... More
p) 3 X 1.5 sq. mm copper

2

-

-

... More
Supply, installing, testing and commissioning of Powder coated G.I cable tray of perforated type with GI cover including suitable powder coated MS supports etc. complete as per the specifications and approved drawings.

-

-

-

... More
a)150mm width X 50mm depth X 1.6mm thickness Cable tray

30

-

-

... More
b)300 mm width X 50 mm depth X 1.6 mm thickness

100

-

-

... More
c) 600 mm width X 50 mm depth X 2.0 mm thickness

150

-

-

... More
Providing maintenance free Earth station with consisting of 65mm dia, standard length (as per equipment supplier) electrode capsule, filled with earth enhancing compound, sealed at both ends and brazed lead for connection at one end, suitable for direct installation at site, at a depth of 2.5mtrs. Bentonite compound upto a depth of 2.0meters around the electrode capsule. Brick chamber & CI Cover complete.

4

-

-

... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

150

-

-

... More
Providing and fixing 50 mm X 6 mm copper strip on surface or in recess for connections etc. as required.

30

-

-

... More
SWG No. 8 bare Copper wire

150

-

-

... More
Supply, Installation , Testing Commissioning of Power Supply Unit

2

-

-

... More
Supply, Installation , Testing Commissioning of VESDA integration module comprise of VESDA model VESDA E VEU A10/VESDA E VEU A10-P/VLP / VLC -505 / VLF-500 / VLF-250 equivalent aspirating smoke detector. The detector is to detect fire at the earliest possible stage and reliably measures very low to extremely high concentrations of smoke, widest sensitivity range of 0.005 to 20% obs/m (0.0015 to 6% obs/ft ). to support four configurable alarms (Alert, Action, Fire 1 and Fire 2) and protects areas up to 250 - 2,000 sqm.(2500-20,000 sft.),to locate the origin of smoke by identifying the first sector (pipe) with the highest level of smoke and then continues to sample air from all sectors to monitor fire growth. The detector is compliance to the standard of FM approved for Hazardous Locations, Class I- Div. 2, CCCf, LPCB, VdS and EN 54-20 tested and approved.

-

-

-

... More
VESDA model VESDA E VEU A10 aspirating smoke detector. Short wave length laser-Based Absolute Smoke Detection system with 4 pipe inlets, High efficiency aspirator; Clean air barrier optics protection; Easy to replace dual stage filter with memory; 7Nos of inbuilt potential free relay outputs;supports linear pipe length of 100m per pipe (total 400m) or branched pipe up to 130m per pipe; supports 80 Nos of EN54 Class A sampling points, AutoLearn for automatic setup of alarm threshold, Referencing & Event log; TCP/IP, WiFi & VESDANet connectivity for central monitoring & monitoring of Andriod/iOS tablets/smartphones. Approvals-UL, ULC, FM, ActivFire, VdS, CE , EN54-20.

1

-

-

... More
VESDA model VESDA E VEU A10-P aspirating smoke detector. Short wave length laser-Based Absolute Smoke Detection system with 4 pipe inlets, High efficiency aspirator; Clean air barrier optics protection; Easy to replace dual stage filter with memory; 7Nos of inbuilt potential free relay outputs;supports linear pipe length of 70m per pipe (total 280m) or branched pipe up to 100m per pipe; supports 40 Nos of EN54 Class A sampling points, AutoLearn for automatic setup of alarm threshold, Referencing & Event log; TCP/IP, WiFi & VESDANet connectivity for central monitoring & monitoring of Andriod/iOS tablets/smartphones, Approvals-UL, ULC, FM, ActivFire, VdS, CE , EN54-20.

1

-

-

... More
Supply, Installation, Testing and Commissioning of Capillary Tube with accessories. The capillary tube materials is compliance with UL (for fire resistance) and ASTM (for physical properties) standards.

15

-

-

... More
Electronic Hooter

2

-

-

... More
Supply, Installation, Testing and Commissioning of 1.5mm thick 1" PVC (VESDA) Aspiration Tubes with fittings accessories. The piping system & network of sampling pipes to transports air from a protected area to the detector actively. The piping and its fittings are directly sourced from OEM and to install as per manufacturers recommendation / standards. The piping materials is compliance with UL (for fire resistance) and ASTM (for physical properties) standards.

500

-

-

... More
Supply, Installation, Testing and Commissioning of 24 AWG, 2 core twisted pair shielded cable for connecting all VESDA detectors in VESDANet loop

200

-

-

... More
SUB HEAD - IV:EXTERNAL POWER SUPPLY

-

-

-

... More
Supply, installation, testing and commsissioning of approved make 11KV,400A A.B switch with all standard accessories etc., complete with cost and conveyance of all materials on existing 4 pole structure with necessary suitable MS channels, clamps, nuts and bolts etc.,complete

1

-

-

... More
Supply, erection, testing and commissioning of 11KV, H.G fuse set including all standard accessories etc., complete with cost and conveyance of all materials on existing 4 pole structure with necessary suitable MS channels, clamps, nuts and bolts etc.,complete

1

-

-

... More
Supply and erecting, testing and commissioning of approved make 11KV, 9KA metal oxide lightning arrestors suitable for 11 KV supply with necessary materials on existing cross arm on existing 4 pole structure with necessary suitable MS channels, clamps, nuts and bolts etc.,complete

1

-

-

... More
Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required on the existing 4 pole structure.

3

-

-

... More
Supply, Erection, testing and Commissing of

2

-

-

... More
11KV H.T Switch Gear Panel (OUTDOOR STANDALONE TYPE) With 1 breaker - (Transformer feeder) Vaccum circuitt breaker with trolly-1Set.

-

-

-

... More
11 KV ,630A ,25KA ,Horizontal Drawout , VCB fitted with 230V AC Motor operated spring charging mechanism, shunt trip and closing coil of 110V DC and Aux contacts of 4 NO+4 NC

-

-

-

... More
CRCA (2 mm ) Sheet Steel Enclosure suitable for OUTDOOR application , Provision for receiving incoming and outgoing power cables thro REAR Bottom entry and with main Busbar as COPPER and Panel Earth bus as COPPER of 25 X 6mm (630Amps)

-

-

-

... More
CONSTRUCTION - The Switch Gear Panel shall be compartmentalised Designed with cubicles fabricated out of High Quality Sheet Steel and the panels shall be dust and vermin proof and with degree of protection IP 42 as per IS 2147. The panels shall be designed having the Following Segregations separately.

-

-

-

... More
a) Breaker compartment

-

-

-

... More
b) Busbar compartment

-

-

-

... More
c) Cable and CT compartment

-

-

-

... More
d) Instrument and Relay Compartment

-

-

-

... More
The Cubical shall be designed for insertion of circuit breaker, which shall be horizontal draw out/horizontal isolation type. Automatic operating type shutters to be provided to ensure no direct access to the live parts.

-

-

-

... More
The clearances between phase to phase and phase to earth shall be provided in accordance with the relevant standards. The bus bars shall be supported by bus support insulators placed at regular intervals.

-

-

-

... More
The panels shall be powder coated with epoxy base paint to give an aesthetically pleasing appearance. The paint shade shall be as per the requirement.

-

-

-

... More
Medium High Voltage Vaccum Circuit Breaker should consist of manual and motor operated spring charged mechanism, mounted on withdrawable truck with three vacuum interrupters. The operating mechanism shall be simple and robust in design.

-

-

-

... More
The mechanism shall be trip free and suitable for rapid reclosing. The vacuum interpters shall be capable of withstanding for switching capacitive currents and also magnetising currents. The closing operation shall be followed by motor operated spring charge mechanism with electrical anti pumping feature.

-

-

-

... More
SAFETY FEATURES:

-

-

-

... More
Interlocks to be provided in such a way that breaker closing to be prevented in intermediate position between service, test and isolated positions.

-

-

-

... More
Mechanical interlock to be provided in order to prevent truck racking in and out when breaker is in closed possition.

-

-

-

... More
Breaker shall be inserted only when control plug and socket is in position.

-

-

-

... More
Control plug and socket shall be removed only in isolated position.

-

-

-

... More
Earthing through a draw-out earthing truck with solid Links on the bus bar and feeder side to be provided.

-

-

-

... More
Integral earthing switch, slow closing type or with making capacity to be provided Through - Breaker earthing.

-

-

-

... More
POTENTIAL TRANSFORMER: (1No)

-

-

-

... More
Resincast 1 phase , Fixed PT of Ratio ..11KV/R3/110V/R3 , Class 1.0, 100VA

-

-

-

... More
CURRENT TRANSFORMER: (3No’s)

-

-

-

... More
Resincast -50 /5+5 A- Core 1…class 0.5,15VA & Core 2 …5P10,15VA single phase CT

-

-

-

... More
METERING: ( 1set)

-

-

-

... More
Digital type 0-50A 96Sq.mm Ammeter with selector switches , 0-12KV. 96 Sq.mm Digital Voltmeter with selector switch

-

-

-

... More
PROTECTION RELAYS:

-

-

-

... More
1) Neumerical IDMT Combined 3OC+1EF Relay(50,51,50N,51N)-P111

-

-

-

... More
2) High Speed Master Trip Relay(86)

-

-

-

... More
3) Trip Circuit Supervision Relay(95)

-

-

-

... More
4)Transformer Aux Relay 3 element(63)

-

-

-

... More
5) Under Voltage Relay(27)

-

-

-

... More
6) Insatantaneous Earth fault Relay

-

-

-

... More
INDICATION LAMPS:

-

-

-

... More
1)CB ON,OFF ,TRIP,TCH,SCH Ind lamps & TCH PB

-

-

-

... More
2) Trip Circuit Healthy lamp. - (1 set)

-

-

-

... More
3) Spring Charging lamp. - (1 set)

-

-

-

... More
4) Auto trip. - (1 set)

-

-

-

... More
5) RYB Indication Lamps. - (1 set)

-

-

-

... More
CONTROL SWITCHES/PUSH BUTTON

-

-

-

... More
a) T-N-C Switch (Breaker Control Switch) - (1 set)

-

-

-

... More
b) Trip circuit Healthy Push Button - (1 set)

-

-

-

... More
c)Local /Remote Switch

-

-

-

... More
d) Control MCB /Fuses

-

-

-

... More
Control Wiring with appropriate colors - (1 set)

-

-

-

... More
230V AC/110V DC Power Pack - 1 No

-

-

-

... More
Alarm scheme with hooter, Accept and Reset Button with 8Way Annunciation window. - (1 set)

-

-

-

... More
Space Heater with Thermostat

-

-

-

... More
Cubicle Ind lamp with Door Switch

-

-

-

... More
Supply of following size 11KVgrade XLPE insulated armoured aluminium conductor underground cable, The cable shall conform to IS 7098 Part 2.

-

-

-

... More
a) 11KV grade 3 core 185 sq mm XLPE Cable.

600

-

-

... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

-

-

-

... More
Above 120 sq. mm and upto 400 sq. Mm

500

-

-

... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required

-

-

-

... More
Above 120 sq. mm and upto 400 sq. Mm

50

-

-

... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of following size in the existing masonry open duct as required.

-

-

-

... More
Above 120 sq. mm and upto 400 sq. Mm

50

-

-

... More
Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required.

-

-

-

... More
a) 11KV grade 3 core 185 sq mm

4

-

-

... More
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required.

-

-

-

... More
a) 11KV grade 3 core 185 sq mm

2

-

-

... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including etc. complete : testing of joints

-

-

-

... More
(a)300 mm dia. R.C.C. pipe

20

-

-

... More
(b)150 mm dia. R.C.C. pipe

20

-

-

... More
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required.

-

-

-

... More
(a)100 mm dia

20

-

-

... More
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required

-

-

-

... More
Supply and commissioning of following size 1.1KVgrade XLPE insulated armoured aluminium conductor underground cable. The cable shall conform to IS 7098, Part 1.

-

-

-

... More
a)3Cx2.5 Armoured Copper Cable.

100

-

-

... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

-

-

-

... More
a) Upto 35 sq. mm

100

-

-

... More
Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

-

-

-

... More
a)3Cx2.5 Armoured Copper Cable.

2

-

-

... More
TRANSFORMER

-

-

-

... More
Supply, Erection, Testing and Commissioning of Outdoor 3 Phase, 50Hz, Oil Filled,Nominal Continuous Rating 630 KVA ,Voltage Ratio 11/0.433 KV,copper wound,Vector Group Dyn11,Insulation Class A,Tapping on HV side for giving Voltage Variation of HV,+5% to -15% @ 2.5% Steps with OLTC + RTCC + AVR ,Temperature rise of OIL/WDG by hermometer/Resistance method over specified ambient of 50°C- 40°/45°C over an ambient of 50°C,Terminations (HV/ LV/Orientation) Cable Box / Cable Box / 180°C,Type of Cooling ONAN,Total Losses at 50% load 1.86KW ( Max ) and at 100% 5.3KW ( Max ) as per IS-1180 Level 2 ,Impedance at rated Current at 75ºC (+10% to -10% Tol) 4.5%. . Fittings : 1) OTI 2) WTI 3) Prismatic Oil Level Gauge 4) Buchholz Relay 5) Silica Gel Breather ( Flange ) 6) Marshalling Box 7)Bottom Filter cum drain valve and Top Oil filter valve 8) Inspection Cover 9) Bottom Oil filter cum drain valve 10)Air release Plug 11) Conservator with oil filling cap and drain plug 12) Pressure release device i.e. PRV - Without contact / Explosion vent with Diaphragm & equalizer pipe 13) Bi directional Wheels -04 Nos. 14) Earthing Terminals 15) Rating & Diagram Plate. 16)Paint : Epoxy, 17) Lifting lugs, 18) Radiators without valves.

1

-

-

... More
LT KIOSK - Design, Fabricate, Supply , installation & commissioning of outdoor type LT feeder pillar box mounted on PCC platform, with double door shutters made out of 3.0 mm thick sheet metal , with suitable rating aluminium busbar, MFM, ammeter, voltmeter selector switches complete with 1 No of 415KV, 1250A FP ACB 50KA MDO with required necessary accessories as per detailed technical specifications and sld, drawings .

1

-

-

... More
APFC Panel

-

-

-

... More
Supply, installation, Testing and Commissioning of 3 phase and Neutral 415V 4 wire Free Standing Floor mounted MVpanel made out of 14 SWG MS sheet after seven tankprocess and painting with Epoxy powder coating. The panel shall consist of suitable rating TPN Aluminium busbar (at the rating of 0.8A/Sq.mm) supported with DMC/ SMC insulators and color coded with Heat shrinkable sleeves.TheMetering shall be provided as specified. The panel shall have Short circuit withstanding capacity of minimum 50KA and consist of the switchgear as mentioned below. The panel shall be got fabricated from manufacturers with CPRI Test certificate only. The PCC shall have atleast two spare cubicles of the maximum rating. The size of all PanelMounting Meters shall be 96X96mm. The Panels shall be mounted on U channels including supply and fixing of the same.

1

-

-

... More
Incoming 400A, 50KA FP MCCB -1 no (With Microprocessor Releases ) 2A, control fuse - 3 Nos. RYB indicating lamps - 1 Set Voltmeter (0-500V) with selector switch - 1 Set PF METER - 1 Set 400/5A, CL-1, 15VA CT's. BUS BAR TPN Aluminium busbar of 500A with 35 KA fault level capacity, mounted on non-hygroscopic, glass fibre reinforced insulators-1Set Automatic Power factor controller with 12channel for controlling the capacitor bank Outgoings 50 KVAR MD type Capacitor bank - 2nos 25 KVAR MD type Capacitor bank - 4nos 15 KVAR MD type Capacitor bank - 2nos 10 KVAR MD type Capacitor bank -2nos 5 KVAR MD type Capacitor bank -2nos 125A TP MCCB 25kA - 2 Nos 110 A contactor -02 nos 63A TP MCCB 25kA - 4Nos 70 A contactor -04 nos 40A TP MCCB 25kA - 6 Nos 40 A contactor - 06nos Two numbers of earthing terminals - one on each side of the panel with earth strip run inside the panel

-

-

-

... More
Supply and commissioning of following size 1.1KVgrade XLPE insulated armoured aluminium conductor underground cable. The cable shall conform to IS 1554/ Part 1 .

-

-

-

... More
a) 3.5C X 400 Sq.mm ( for PCC Panel )

400

-

-

... More
b) 3.5C X 240 Sq.mm ( for HVAC Panel )

200

-

-

... More
c) 3.5C X 120 Sq.mm ( for APFC Panel )

40

-

-

... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

-

-

-

... More
a) Above 185 sq. mm and upto 400 sq. mm

300

-

-

... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required

-

-

-

... More
a) Above 95 sq. mm and upto 185 sq. mm

10

-

-

... More
b) Above 185 sq. mm and upto 400 sq. mm

50

-

-

... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing masonry open duct as required.

-

-

-

... More
a) Above 95 sq. mm and upto 185 sq. mm

10

-

-

... More
b) Above 185 sq. mm and upto 400 sq. mm

70

-

-

... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required.

-

-

-

... More
a) Above 95 sq. mm and upto 185 sq. mm (clamped with 25/ 40x3mm MS flat clamp)

10

-

-

... More
b) Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

90

-

-

... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on cable tray as required

-

-

-

... More
a) Above 95 sq. mm and upto 185 sq. mm (clamped with 25/ 40x3mm MS flat clamp)

10

-

-

... More
b) Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

90

-

-

... More
Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

-

-

-

... More
a) 3½ X 400 sq. mm (82mm)

16

-

-

... More
b) 3½ C x 240sq. mm (62 mm)

4

-

-

... More
c) 3½ X 120 sq. mm (45mm)

4

-

-

... More
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.

10

-

-

... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

200

-

-

... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

2

-

-

... More
Supplying and laying 25 mm X 5 mm copper strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50 mm)

40

-

-

... More
Supply, fabrication and installation of Mild steel : for tray made out of 50X50X5mm MS angles ladder type including MS Strips of size 25X6mm at every 600mm intervals including all fixing accessories/ supports or U channels for installation of HT / LT panels and painting of the tray with 2 coats of Red Oxide Primer and 2 coats of Synthetic enamel paint complete as required.

1

-

-

... More
Providing Chain Link fencing around outdoor feedar pillar yard upto 1.8m height with a continuous brick masonry kerb wall of 300mm above ground with suiatble foundation and palstering of the same as per standard practice.

100

-

-

... More
Supply and fixing of 1.8X1.8m MS weld mesh gates for outdoor feedar pillar yard as per standard design and with earth connection from fence

4

-

-

... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)

20

-

-

... More
Spreading of two layers of 40mm stone metal inside the outdoor feedar pillar yard

30

-

-

... More
SAFETY ACCESSORIES

-

-

-

... More
Supply and laying of 12mm thick Rubber mats of size 1000X 2000mm

2

-

-

... More
Supply and fixing of Laminated First Aid charts

1

-

-

... More
Supply and fixing of 4.5 KG CO2 Fire extinguisher

2

-

-

... More
Supply and fixing of 4 nos Fire buckets Set with a stand & canopy for rain protection.

1

-

-

... More
Supply of 11KV Hand gloves

1

-

-

... More
Supply and fixing of 11 KV Stove enamelled 250 X 200mm Danger Notice boards with English, Hindi & Local language.

1

-

-

... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

-

-

-

... More
a)150 mm dia. R.C.C. pipe

50

-

-

... More
b)300 mm dia. R.C.C. pipe

50

-

-

... More
SUB HEAD - V : AREA LIGHTNING

-

-

-

... More
Supply and erection of steel stepped and swaged tubler poles of 9mtr. Long (410 SP25) (1.5mtr below Ground) with base plate, earthing studs,1.5Mtr out reach single/ Double arm, FRP terminal box, 2nos (0.75mtrs each) 40mm dia class B GI Pipe for incoming and outgoings cables, including Excavation in all types of soil, PCC 1:2:4, PCC Pedestal complete with painting with black bitumin paint inside the coping for embedded portion and two coats of Zinc chromate primer and two coats of Aluminium paint externally for length above the ground. The pole shall be with FRP Junction box consisting of 10A MCB. The wiring from Junction box to Light fixture shall be carried out with 3core 2.5sq.mm Copper conductor cable. The Pole shall be fixed with 90W LED Lamp with fixture including supply of Controlgear / driver and lamp (Make : Cat no. LR02-102-XXX-57-G2, Wipro make / Cat No-GreenLine V2 (BRP410) Philips make )

10

-

-

... More
Providing Spiral coil earthing with 8 SWG GI wire including spreading of salt and charcoal as per IS 3043/87 with latest amendments.

10

-

-

... More
Supply of following size 1.1KVgrade XLPE insulated armoured aluminium conductor underground cable, in built up cable trench/ already laid RCChume pipe / on surface of slab and walls with clamps or on cable tray with all installation materials. The cable shall conform to IS.

-

-

-

... More
a) 4C X 10Sq.mm Aluminium

350

-

-

... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

-

-

-

... More
Upto 35 sq. mm

300

-

-

... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required

-

-

-

... More
Upto 35 sq. mm

50

-

-

... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

-

-

-

... More
4 X 10 sq. mm (25mm)

20

-

-

... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including etc. complete : testing of joints

-

-

-

... More
150 mm dia. R.C.C. pipe

15

-

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Combined ShapeCreated with Sketch.Sign In
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.
TENDER BY COUNTRIES
View All
United States Tenders|
United Kingdom Tenders|
Spain Tenders|
France Tenders|
Qatar Tenders|
Australia Tenders|
Canada Tenders|
China Tenders|
Malaysia Tenders|
Maldives Tenders|
Singapore Tenders|
Bangladesh Tenders|
Ethiopia Tenders|
Bhutan Tenders|
Kuwait Tenders|
Oman Tenders|
Germany Tenders|
Egypt Tenders|
Ghana Tenders|
Saudi Arabia Tenders
TENDER BY AUTHORITIES
View All
Federal Road Agency Tenders|
Bangladesh Railway Tenders|
Area Metropolitana De Barcelona Tenders|
Jsc Russian Railways Tenders|
Kuwait Oil Company Tenders|
Civil Aviation Authority Tenders|
Food And Agriculture Org. Tenders|
Eskom Tenders|
Energy Regulation Commision Tenders|
Dept Of Defence Tenders
TENDER BY CATEGORIES
View All
Agriculture Or Forestry Works Tenders|
Automobiles And Auto Parts Tenders|
Civil And Construction Tenders|
Consultancy Services Tenders|
Education And Training Services Tenders|
Electrical And Electronics Tenders|
Finance And Insurance Sectors Tenders|
Food Products Tenders|
Furnitures And Fixtures Tenders|
Healthcare And Medicine Tenders
TENDER BY PROCUREMENT
Goods Tenders|
Works Tenders|
Services Tenders
OFG MANUFACTURING BUSINESSES PRIVATE LIMITED
  • Head Office
    6th Floor, Global Business Park, Tower A, Besides Guru Dronacharya Metro Station, Gurugram, Haryana - 122002, India
  • Sales Office
    B - 705 & 706, Sankalp Iconic Tower, Opp. Vikramnagar Colony, Iscon Cross Road, S. G. Highway, Ahmedabad - 380054, India
COMPANY
POLICIES
SUPPORT
MOBILE APPS
© Powered by OFG MANUFACTURING BUSINESSES PRIVATE LIMITED, All Rights Reserved