Public Health Engineering Department Tender

90 mm dia

110 mm dia

125mm dia

140 mm dia

160 mm dia

180mm dia

200mm dia

Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended upto date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.( PHED 2019/1.1 )

80 mm

100 mm

150 mm

200 mm

Providing,lowering,laying,aligning ,fixing in position in pipe line manually operated CI D/F sluice valve of Approved make(IS 14846 ammended up to date (PN 1.0) Class of following dia complete (including jointing and jointing material) including all material, labour,testing and commissioning along with pipe line as per technical specification and as per direction of Engineer Encharge Category B (makes/ venders other than Category A will be considered in Cat B) (RUIDP 2017/19.20.2)

80 mm Dia

100 mm Dia

125 mm Dia

150 mm Dia

200 mm Dia

Earth work and Demolition work

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils (PWD2019/ B-1/1.8)

Demolishing cement concrete manually/ by Mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge1:3:6 or richer mix (PWD2019/ B-14/14.2.1)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge1:4:8 or leaner mix ( PWD2019/ B-14/14.2.2)

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering-All work up to plinth level. M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coares sand : 4 graded stone aggregate 20mm nominal size). (PWD BSR 2019 / B-3/3.1.2)

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering-All work up to plinth level. 1:4:8 ( 1 cement : 4 coares sand : 8 graded stone aggregate 40mm nominal size) (PWD BSR 2019 / B-3/3.1.6).

Earth work In excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth. 1.5m in width as well as 10 sum on plan) including disposal of excavated earth, lead upto 50m and all lift upto 1.5m, disposed earth to be levelled and neatly dressed. All type of Soil (PWD/2019/B-1/1.6)

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering-All work up to plinth level. 1:4:8 ( 1 cement : 4 coares sand : 8 graded stone aggregate 40mm nominal size) (PWD BSR 2019 / B-3/3.1.6)

Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand). (PWD BSR 2019 /B-6.1.6)

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : (20 mm thick) (PWD BSR 2019 /B_12.2.2)

Rough Chisel dressed Kota stone 35 mm thick flooring of approved shade set in pattern over 20mm thick base of cement mortar 1:6 (1 cement : 6 coarse sand) and pointing with cement sand mortar 1:3 with pigment to match the shade of stone with joint thickness up to 15 mm complete in all respects : (PWD BSR 2019 /B-11/11.20)

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering-All work up to plinth level. M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coares sand : 4 graded stone aggregate 20mm nominal size) (PWD BSR 2019 / B-3/3.1.2)

S&F RCC Manholes covers with frame of approved make (Light duty) Size 600x600mm Double seal (PWD/2019/S-3/3.35.4)

Providing and laying RCC NP4 pipe (with steel pushing collar) jointing with cement mortar joints by trenchless method adopting any suitable technology below ground at required depth includingcarrying out survey work at the job site for determining underground cable trenches like telephone, power cable, water & sanitary lines and resistivity tests for finding the soil strata using necessary equipments for completion of work, mobilizing of machineries and specialized crew at the job site, etc. complete in all respects, including excavation of drive pit and exit pit upto 3 metre depth with proper protection at the three sides, providing and casting of MS cutting edges for front shield and constructing thrust bed at designed level as directed by the Engineer, crane for handling of pipes, and any other machinery, tool & tackles required, complete in all respect as per specification and the direction of the Engineer.( This work is only for state Highway & National highway ) (RUIDP 2017/17.81)

200 mm internal dia.

250 mm internal dia.

300 mm internal dia.

Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge. (PHED 2019/1.6)

MS pipe specials upto 600 mm dia (with minimum 5.0 mm thickness sheet)

Providing service connection as per technical specifications & standard drawing as per relevant IS Code (amended up to date) from all kind of water mains up to consumer meter/premises (Complete job). This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil including demolishing of Cement Concrete, WBM, Black top etc. of all thickness; cutting of CC road/jhiri by using a concrete cutter machine; depositing and refilling of pit & jhiri with watering & ramming/compacting in layers and disposal of surplus excavated soil as directed with in a lead of 50 meter; providing & fixing of all fitting duly approved in accordance with ISO/DTR 9080 as per specification for potable water including approved make of MS clamp with saddle piece gunmetal ferrule (ISI make), gunmetal NRV (ISI Make), valve (IS:778) and specials with MDPE pipe PE-80 PN 12.5 as per ISO 4427, with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges. In addition to the ferrule, an orifice of 4.0mm Dia should also be provided in the service line a the entry point of the consumer's property in such a way that it should be accessible for inspection to VWSC , PHED and any other authority which would like to inspect as and when required. The service line should be laid at least 45 cm below ground level, except in cases of concrete / bituminous roads where minimum depth shall be 20 cm. For detailed specifications of MDPE pipes, please refer section “Technical Specifications” in Volume I of bid document. General specifications of MDPE pipes shall be as under: • The raw material shall be virgin PE 80 Blue compound and comply with the requirements of ISO/Directive of Testing Material: 9080 with minimum required strength of 8kg/sq.cm. • The raw material shall be of Food grade quality • Pressure rating shall be 12.5 Bar • The pipes shall bear ISO marking (PHED/ JJM/ D&S/BSR/ 2020-21/ 802-862 dated 07.07.2020)

Average length upto 05 mtr 20 mm dia MDPE pipe

Extra length of 20 mm MDPE pipe including excavation, providing, laying & jointing for length of service line above 5.00 mtr.

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). (PWD2019/B-3/3.1.1)