Public Health Engineering Department Tender

80 mm

100 mm

150 mm

200 mm

Providing , supplying, lowering and laying instandard lengths HDPE PE-80 PN-6 pipes conforming to IS 4984 :1995 with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ Compression fitting joint or flanged joint and specials jointing pipes by butt fusion welding method, including all taxes (Central and local), transportation and freight charges, inspection charges, loading/unloading charges, stacking the same in closed shade duly protecting from sunrays and rains, including cost of labour and material, specials tee, bends etc., satisfactory hydraulic testing etc., complete as per technical speciafications and directions of Engineer-In-Charge (excluding earthwork) PE-80/PN-6 PHED BSR 2019

75 mm

90 mm

110 mm

140 mm

160 mm

180 mm

200 mm

Excavating trenches of required width for pipe cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr.:

All kinds of soil, Pipes cables, etc. exceeding 80 mm dia but not exceeding 300mm dia. PWD BSR 2019 Rajsamand

Excavating trenches of required width for pipe cables, etc. including excavation for sockets depth up to 1.5 Mtr. including taking out the excavated materials refilling the soils required in layers not exceeding 20 cm in depth including consolidation each deposited layer by ramming, watering etc. and disposal of un serviceable material as directed within a lead of 50 Mtr.:

Ordinary rock, Pipes cables, etc. exceeding 80 mm dia but not exceeding 300mm dia. PWD BSR 2019 Rajsamand

Ordinary rock, Pipes cables, etc. exceeding 80mm dia but not exceeding 300mm dia. PWD BSR 2019 Rajsamand

Hard rock ( required blasting ) useful material 30% of volume excavated , Pipes cables, etc. exceeding 80 mm dia but not exceeding 300mm dia. PWD BSR 2019 Rajsamand

Recovery for useful material . PWD BSR 2019 Rajsamand

Providing, lowering, laying, aligning, fixing in position in pipe line, Resilient Seated D/F DI Sluice valves of approved make & design standard of following dia complete (including jointing & jointing material ) including all material, labour, testing and commissioning along with pipe line as per Technical Specification & as per direction of Engineer in charge from the list of approved makes of PHED. Manually operated class PN 1.0 for inside village.

80 mm (19.23.1.1 RUIDP BSR)

100 mm (19.23.1.2 RUIDP BSR)

125 mm (19.23.1.3 RUIDP BSR)

150 mm (19.23.1.4 RUIDP BSR )

200 mm (19.23.1.5 RUIDP BSR )

Providing, lowering, laying, aligning, fixing in position and jointing CI dismantling joint (suitable for sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning as per Technical Specifications and as per direction of Engineer. for inside village.

80 mm, (19.40.1 RUIDP BSR)

100 mm, ( 19.40.2 RUIDP BSR)

125 mm, (19.40.3 RUIDP BSR)

150 mm, (19.40.4 RUIDP BSR)

200 mm, (19.40.5 RUIDP BSR)

Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge.

MS pipe specials upto 600 mm dia (with minimum 5.0 mm thickness sheet) PHED BSR 2019

Dismantling of existing structures like culverts, bridges, retaining walls, CC road and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceablematerial with all lifts and lead of 50 metres as directed by Engineer.

Cement Concrete Grade M-15 and above and PCC blocks for inside village RUIDP2017

Providing, laying and compacting plain/ reinforced cement concrete of specified grade in foundation/ leveling course/ pile cap using concrete mixer and vibrater complete including costof form work, as per drawing and technical specifications and as per clause 1100, 1500, 1700, 2100 of MoRT&H specification including all scaffolding material, labour, machinery. RUIDP2017

PCC Grade M -15

PCC Grade M -20

PCC Grade M - 30

Providing service connection as per technical specifications & standard drawing as per relevant IS Code (amended up to date) from all kind of water mains up to consumer meter/premises (Complete job). This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil including demolishing of Cement Concrete,WBM, Black top etc. of all thickness; cutting of CC road/jhiriby using a concrete cutter machine; depositing and refilling of pit & jhiri with watering & ramming/compacting in layers and disposal of surplus excavated soil as directed with in a lead of 50 meter; providing& fixing of all fitting duly approved in accordance with ISO/DTR 9080 as per specification for potable water including approved make of MS clamp with saddle piece gunmetal ferrule (ISI make), gunmetal NRV (ISI Make), valve (IS:778) and specials with MDPE pipe PE-80 PN 12.5 as per ISO 4427, with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges. In addition to the ferrule, an orifice of 4.0 mm dia should also be provided in the service line at the entry point of the consumer’s property in such a way that it should be accessible for inspection to VWSC, PHED and any other authority which would like to inspect as and when required. The service line should be laid at least 45 cm below ground level, except in cases of concrete / bituminous roads where minimum depth shall be 20 cm. For detailed specifications of MDPE pipes, please refer section “Technical Specifications” in Volume I of bid document. General specifications of MDPE pipes shall be as under: • The raw material shall be virgin PE 80 Blue compound and comply with the requirements of ISO/Directive of Testing Material: 9080 with minimum required strength of 8kg/sq.cm. •The raw material shall be Food grade quality pressure rating shall be 12.5 Bar • The pipes shall bear ISO marking

Average length upto 5.00 mtr 20 mm dia MDPE pipe. PHED BSR 2019

Extra length of 20mm MDPE pipe including excavation, providing, laying and jointing for length of service line above 5.00 mtr. PHED BSR 2019

Valve chambers & Other works

Earth work in excavation over area ( exceeding 30 cm in depth. 1.5 Mtr in width as well as 10 sqm on plan) including disposal of excavated earth lead up to 50 m and lift up to 1.5 Mtr. Disposal earth to be leveled and neatly dressed. All kinds of soil . PWD BSR 2019 Rajsamand

Earth work in excavation over areas (exceeding 30 cm in depth, 1.5 Mtr. In width as well as 10 sqm on plan) including disposal of excavated earth lead up to 50 m and lift up to 1.5 mtr disposed earth to be leveled and neatly dressed including stacking of useful material if available. Ordinary rock. PWD BSR 2019 Rajsamand

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. PWD BSR 2019 Rajsamand

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). PWD BSR 2019 Rajsamand

Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. (BSR PWD Circle Rajsamand 2019) M20 grade Nominal Mix (with graded stone aggregate 20mm nominal size) PWD BSR 2019 Rajsamand

Centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formworks for foundation in basement rafts, footings, straps beams, bases of columns etc. up to plinth level. PWD BSR 2019 Rajsamand

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code) PWD BSR 2019 Rajsamand

Providing, hoisting and fixing up to floor 3 level precast reinforced concrete work in Nominal M20 grade mix including cost of required centering, shuttering, finishing, smooth with 6 mm thick cement plaster 1:3 (1 cement: 3 fine sand) on exposed surface complete excluding cost of reinforcement String courses,coping,bed plates, anchor blocks, plain window, sills etc PWD BSR 2019 Rajsamand

Interconnections with existing system

Labour Charges for making connection with proposed pipe line to existing pipe line of AC/ DI/ CI including dewatering etc. complete but excluding the cost of pipes, specials, joints etc as directed by site engineer for following dia. (Earthwork to be measured and paid separately) 80-200 mm dia . (BSR RUIDP 2017)

Labour Charges for making connection with proposed pipe line to existing pipe line of PVC/ HDPE/ GRP including dewatering etc. complete but excluding the cost of pipes, specials, joints etc as directed by site engineer for following dia. (Earthwork to be measured and paid separately) 80-200 mm dia . (BSR RUIDP 2017)