Military Engineer Services Tender

Supply, fixing and testing of Aesthetically Designed LED Street light luminaires of 90/92 watts (100 lum/watt output) IP66, made of die cast aluminium houisng and heat resistant toughned glass with excellent thermal management. LED's should have individual lens on each LED for uniform ditribution of light. Fitting should have operating Voltage range 100 to 280Volts, THD 10%, p.f0.95 with inbuilt surge protection of 5KV and shoud have10KV extra surge protection mount externally, CRI 70, CCT 5500 -6000K. including PVC connector complete all as specified and directed. Make : Crompton Graeves /Philips / Bajaj / Wipro/Havells Note : - Manufacturer should have IN HOUSE Testing facilities/ Laboratory duly accredited by NABL (Ministry of science & Technology, Govt. Of India). Bidder has to provide the LM79 report duly accredited from NABL Lab with NABL certificate of same lab & LM80 report. Accepting Officer can send randomly selected samples from the supplied material to third party lab( ITC, UL , Hi Physics, ERTL) for cross checking of results at BIDDER Cost.

Supply, fixing and testing of Aesthetically Designed LED Street light luminaires of 70/72 watts (100 lum/watt output) IP66, made of die cast aluminium houisng and heat resistant toughned glass with excellent thermal management. LED's should have individual lens on each LED for uniform ditribution of light. Fitting should have operating Voltage range 100 to 280Volts, THD 10%, p.f0.95 with inbuilt surge protection of 5KV and shoud have10KV extra surge protection mount externally, CRI 70, CCT 5500 -6000K. including PVC connector complete all as specified and directed. Make : Crompton Graeves /Philips / Bajaj / Wipro/Havells Note : - Manufacturer should have IN HOUSE Testing facilities/ Laboratory duly accredited by NABL (Ministry of science & Technology, Govt. Of India). Bidder has to provide the LM79 report duly accredited from NABL Lab with NABL certificate of same lab & LM80 report. Accepting Officer can send randomly selected samples from the supplied material to third party lab( ITC, UL , Hi Physics, ERTL) for cross checking of results at BIDDER Cost.

Supply, fixing and testing of Aesthetically Designed LED Street light luminaires of 60 watts (100 lum/watt output) IP66, made of die cast aluminium houisng and heat resistant toughned glass with excellent thermal management. LED's should have individual lens on each LED for uniform ditribution of light. Fitting should have operating Voltage range 100 to 280Volts, THD 10%, p.f0.95 with inbuilt surge protection of 5KV and shoud have10KV extra surge protection mount externally, CRI 70, CCT 5500 -6000K. including PVC connector complete all as specified and directed. Make : Crompton Graeves /Philips / Bajaj / Wipro/Havells Note : - Manufacturer should have IN HOUSE Testing facilities/ Laboratory duly accredited by NABL (Ministry of science & Technology, Govt. Of India). Bidder has to provide the LM79 report duly accredited from NABL Lab with NABL certificate of same lab & LM80 report. Accepting Officer can send randomly selected samples from the supplied material to third party lab( ITC, UL , Hi Physics, ERTL) for cross checking of results at BIDDER Cost.

Supply and fixing brackets 1.2 m long made to shape , fabricated out of GI pipe light grade (ISI marked) 40mm dia including provision of socket/nipple welded at one end to suit the light fitting and fixed to pole including clamps with nuts and bolts of suitable size, cutting, drilling and welding etc fixed to poles and applying two coats of synthetic enamel paint over a coat of red oxide primer all as directed by Engr-in-Charge.

Taking out old unserviceable cable of any size and description from pole to building meter box /under ground complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth for laying of pipe, cable and foundation of poles/stays/water pipes etc. not exceeding 10 Sqm area on plan and not exceeding 1.5m in depth and getting out in soft/loose soil, complete all as specified.

Excavation in trenches not exceeding 1.5 m wide and exceeding 1.5m but not exceeding 3.0m in depth for laying of pipe, cable and foundation of poles/stays/water pipes etc. not exceeding 10 Sqm area on plan and not exceeding 1.5m in depth and getting out in soft/loose soil, complete all as specified.

Returning, filling in including spreading leveling watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed.

Removing surplus soil to a distance not exc. 50 M and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.

Clean dry sand laid in trenches/ ducts for bedding and cushioning to cable, including spreading and leveling complete all as specified.

Precast concrete cable covers type 2 flat, of size 300x180x40mm laid dry in trenches for protection of cable complete all as specified.

Supplying, laying, jointing, testing and commissioning of XLPE insulated armoured electric power LT cable (heavy duty) with aluminium conductor 1100 Volts grade of cross sectional area 10 Sqmm 2 core complete laid on wall/pole complete all as specified and directed. Note : (i)Cable shall be laid in trenches, under road, across the nallahs, along pole/wall and in ducts. (ii) Excavation & earth work, pipe, clamp, sand cushioning and cable protection shall be measured separately. Make of cable : Polycab, Havells, Fort Gloster, CCI

Supplying, laying, jointing, testing and commissioning of XLPE insulated armoured electric power LT cable (heavy duty) with aluminium conductor 1100 Volts grade of cross sectional area 10 Sqmm 4 core complete laid on wall/pole complete all as specified and directed. Note : (i)Cable shall be laid in trenches, under road, across the nallahs, along pole/wall and in ducts. (ii) Excavation & earth work, pipe, clamp, sand cushioning and cable protection shall be measured separately. Make of cable : Polycab, Havells, Fort Gloster, CCI

Wiring (with approved colour coding as per IS) with single core FRLS PVC insulated flexible multistranded copper conductor 1.1 KV grade (main cable : number of runs indicated below) along with one run of single core FRLS PVC insulated flexible solid/multistranded copper conductor 1.1 KV grade for earthing for connection of street light with junction box on existing pole with PVC cable connector of suitable size, for 2 runs of 2.5 sq. mm main cable + 1 run of 1.5 Sq. mm earth cable complete all as specified and directed. Make of wires : Finolex/Havells/Polycab

Supply and erecting LT Prestressed concrete pole 9 Mts long cross sectional area 102 mm x 152 mm at top and 102x279 mm at bottom class 10 complying with requirement of relevant IS and including marking alternate yellow and black strips 30 cm high each , total of 5 Nos , commencing from the top of PCC coping with two coats of synthetic enamel paint over a coat of primer and writing pole Nos (letters and figures) (Block, Roman, Italic or Indian) of size as directed with synthetic enamel paint complete all as specified and directed. Note:- Excavation and shall be measured and paid for separately. Make : Cement Fabric Chandigarh, Punjab Prestressed concrete Ltd , Haryana Concrete Udypg Ltd, Kashmir Cement, KB Industires

Supplying & erecting steel tubular swaged pole 12 mtr long, type 410 SP-31 with cast iron base plate, finial taper and single swan neck including Painting upto 1.5 mtr from coping in alternate layers of black and yellow color paint and numbering of pole complete including necessary earthe work and PCC 1:2:4 type B-I using stone aggregate as in foundation of suitable size complete all as specified and directed. Make : Mohinder Industries Ludhiana / Surjeet Steel Industries / Vikram Industries Mohali / M/S Shohan Lal New Delhi / M/S Bajaj Electricals

FRP junction box of size 450 x 450 mm, including 6 Amps, MCB single pole And aluminium bus bar of three nos complete and all as specified and directed.

PCC (1:4:8) type D-2 using 20mm graded stone aggregate in foundations as mass concrete for poles, struct, stays etc including necssary form work and finishing the surface fair and even without using extra cement all as divided and specified

PCC (1:3:6) type C-1 using 20 mm graded stone aggregate for coping around the poles, structs, stays etc including form work and finishing the surface even and smooth complete all as specified and directed.

GI tube light grade (ISI marked) 40mm bore laid in trenches across road/nallah or fixed along with wall/pole including two clamp, 2 Nos FI of 40 x 6mm size with nuts, bolts and washers or laid in floors complete for cable protection complete all as specified and directed. Make: TATA/JINDAL/RAVINDRA/SURYA PRAKASH

Supply, fixing and testing of Aesthetically Designed LED Flood light luminaires of 120 watts (100 lum/watt output) IP66, made of die cast aluminium houisng and heat resistant toughned glass with excellent thermal management. Fitting should have operating Voltage range 100 to 280Volts, THD 10%, p.f0.95 with inbuilt surge protection of 5KV and shoud have10KV extra surge protection mount externally, CRI 70, CCT 5500 -6000K. including PVC connector complete all as specified and directed. Make : Crompton Graeves Cat Part No.LFLN-120-CDL/60 or equavalent in Philips / Bajaj / Wipro Note : - Manufacturer should have IN HOUSE Testing facilities/ Laboratory duly accredited by NABL (Ministry of science & Technology, Govt. Of India). Bidder has to provide the LM79 report duly accredited from NABL Lab with NABL certificate of same lab & LM80 report. Accepting Officer can send randomly selected samples from the supplied material to third party lab( ITC, UL , Hi Physics, ERTL) for cross checking of results at BIDDER Cost.

Frames work with 32 mm dia GI pipe suitable for symmertically fitting of 4 Nos of lights with switch gears control unit of 360 degree angle complete with MS clamps bolts and nuts, internal dia of frame is 150 cm including necessary mounting arangement on 11 metre long steel pole complete all as specified and directed.

Supplying, installation testing and commissioning of electric water storage heater (Geyser), vertical type, manual of capacity 50 Ltr, 5 star BEE rating, 2 KW heating element with rated pressure of 0.7 to 0.8 MPA, autocut facility, having inner tank of quality as supplied by the manufacturer for 5 star rating, complete fixed at location as decided by EIC with & including 4 Nos anchor bolt 12mm x100mm long complete including making good the disturbed surface all as specified and directed. Note : Anchor bolt shall be grouted with hammer drill only. Make of Geyser : USHA Model Misty Manual / HAVELLS Model Adonia Manual / JAQUAR Model ELENA MANUAL Note : Contractor shall obtained the warranty for 'Heating Element' and 'Inner & Outer Tank' of the Geyser from the manufacturer and submitted to the Eng-in-Charge for their verification and record.

Galvanised iron tubing 15 mm dia bore medium grade with all fittings and concealed in walls and ceiling or laid in floors complete including cutting chases, pinning in, making good to facings where required and making good the disturbed surface as per existing all as specified. Make: TATA/JINDAL/RAVINDRA/SURYA PRAKASH

Stop valves, cast copper alloy chromium plated, screwed down high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for union, complete all as specified and directed. Make : Seiko/ Gem/ Kingston/ S.S.

Bib tap cast copper alloy chromium plated, fancy type, with capstain head handle screwed down screwed for iron pipe and fixed for 15mm bore pipe complete all as specified. Make : Seiko/ Gem/ Kingston/ S.S.

Point wiring with 2.5 Sqmm PVC sheathed flame retardent,low smoke (FRLS) single core stranded copper conductor cable 1100 v grade, controlled by 15 Amp Socket independent point by one switch for one geyser point drawn in and including PVC rigid non metallic concealed conduit 19/20 mm dia to be terminated in and including pressed steel terminal boxes with 3 mm thick bakelite sheet top cover (Make-HYLAM/SUPER) including 1.5 sqmm PVC sheathed Flame Retardent single core stranded copper earth continuity conductor controlled by one switch complete all as specified and directed.(Switches and sockets shall be measured and paid for separately)(Wiring shall be made as per colour code in IS for Phase, neutral and earth). Make of wires : Finolex/Havells/Polycab

Switch piano, flush type, 15 amps, 240 V single pole, one way fixed on laminated sheet top cover (laminated sheet top cover is included in point wiring) all as specified. Make : ANCHOR/PLAZA/HAVELLS

Socket outlet two-in-one, 3 pin, 15 Amps & 3 pin 5 Amps flush type fixed on laminated sheet top cover(laminated sheet top cover is included in point wiring) Make : ANCHOR/PLAZA/HAVELLS

Earthing complete with galvanized iron earth plate electrode of size 600x600x6.0mm , buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts , nuts , check nuts and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate 20 mm dia watering pipe medium grade 1.70 mtr long with a plug at top, GI protection pipe light grade 15 mm dia from earth pit to main board including PCC pit in cement concrete 1:2:4 along with CI frame and cover 10mm thick duly hinged to CI frame as shown in the electrical plate No3 of SSR 2009 part 1 specification at page 497.

Earthing complete with galvanized cast iron earth plate electrode 600x600 x6.0mm thick buried directly in ground( earth pit not less than2.25 mtr deep below ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level ,connected to galvanized iron strip of size 25x4 mm as earthing lead by means of nuts and bolts check nuts and washers of galvanized iron or steel all as shown on electrical plate No -5 of SSR 1991- Part 1 connected to earthing test point all as specified or indicated including testing on completion . The unit rate shall include the elements as given below :- a)Earth electrode as mentioned above b)Main earthing lead of 25x4 mm galvanized iron strip from earth electrode to test point up to 7.5 mtrs. c)Connecting earthing lead and electrode all as specified and testing complete. d)Adequate quantity of charcoal and salt e)GI protection pipe of 40 mm dia medium grade of length not more than 5.00mtrs .f)No PCC pit shall be made in lieu 40 mm dia GI pipe medium grade watering pipe shall be provided of length 1.70 mtrs with top edge 20 cm above the ground level and having plug at its top and bottom edge touching the top edge of electrode.

Exhaust fan, 450mm sweep, with heavy duty motor, aluminium die cast body, Corrosion Resistant Powder Coated finish, Copper Winding, double ball bearing, Finger Proof Safety Guard, Metal Blades complete with & including louvers of best quality available in market including making suitable opening in wall for fixing of exhaust fan complete fixing with & including anchor nuts, bolts and making good the disturbed surface of wall as per existing specification all as specified and directed. Make : CROMPTON GREAVES/HAVELLS/ BAJAJ

Supply, Installation and testing energy efficient split type Air Conditioning unit electric driven, single phase 230 volts, 50 Hz, BEE 3 star rating of capacity 1.5 Ton complte with adequate length of insulating copper tubing, MS factory made brackets for fixing of compressor unit including necessry cutting hole in brick work and making good the disturbed surface. Make: Voltas /Lloyad / Hitachi / Carrier

Voltage stabilizer for automatic operation single phase naturally air coold in door type & designed for input variation between 170 to 250 V with out put voltage stabilized at 230 V with accuracy of ± 2.5% ad of capacity 4 KVA complete all as specified and directed. Make : Make : Volini, AE, V-Gyard

Supply installation, testing and commissioning LT Feeder piller board out door type cubicle panel board suitable for 3 phase,4 wire 415 volt 50 hz factory febricated, powder coated made out of 3 mm thick CRCA sheet and MS angle iron sectiom 40X40X6mm frame with front and back openable double door system with locking arragement louver and air vent gaket for netural flow of air with conopy, inner compartment made out of 16 gauge the CRCA sheet duly compartmentalized for each MCCB of incoming and outgoing with lockable arragement with alluminium bus bar three phase and neutral of capacity of 200 amp marked red, yelllow, black and blue inslulators, made of high strength insulated material suitable 1100 voltage all controll PVC wires multistrand copper conductor and shall be properly bunched, tied, frerruled for proper indication , grouted and fixed with PCC foundation complete including provision of the following controlls and accessories including dismantling of old LT panel :- Note:- (i) The panel shall be factory made powder phosphatised coated of approved shade and shall be fabricated from one of manufacture i.e L&T / LEGRAND / SIEMENS / ABB / SCHNEIDER complete all as specified and directed. (ii) The panel shall have suitable size with proper spacing with locking arrangement including supplying and fixing of following items:- INCOMING:- (a) MCCB TPN 100 Amps, with adjustable, thermal magnetic and microprocessor release 4 Pole. 415 Volts having breaking capacity 35 KA -01 No. OUTGOING:- (a) MCCB TP 40 Amps with adjustable thermal and magnetic release, 4 Pole. 415 Volts having breaking capacity 25 KA -02 Nos. (b) MCCB TP 25 Amps with adjustable thermal and magnetic release, 4 Pole. 415 Volts having breaking capacity 25 KA -06 Nos. (c) Digital type Volt meter 0-500 Voltssquare type with selector switch - 01 No. Make - L&T / SIGMA/ CONZERV/AE (e) Digital type Ammeter 0-600 Amps square type with selector switch - 01 No. Make - L&T / SIGMA/ CONZERV/AE (f) Wiring complete with copper wire of suitable size (g) Indicator lamp LED type, set of three marked red, yellow & blue - 01 Set. (h) Cable glands brass of suitable size for cable. Make of MCCB, MCB : Legrand / Schneider / Siemens / L&T

Boring of holes under Road/Hard Standing for passing of GI pipe 40 to 80 mm bore complete all as specified and directed by Engr-in-charge.

Chemical earthing with copper plate 90cm x 60cm x 3.15mm thick burried directly in ground verticvally at a depth not less than 4.5metre below ground level with top edge of earth plate surrounded from all sides by 4 to 5 feet thick salt and charcoal dust and 1 to 2 feet thick Magnesium sulphate filling alternate layers and elelctrode connections by using 20 x 3mm copper strip (upto the test point) by means of bolts, nuts, check nuts and washers amde of steel and thimbles and protected by light grade 25mm dia GI pipe connected to test point and GI pipe light grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC channer pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil to a distance not exceeding 50 metre complete all as specified and directed and as shown in electrical plate No. 5 of SSR -2009 (Part-I).

Copper strip 20 x 3mm as in continuity conductor or main earthing lead fixed to wall on batten or recessed or chases or burried directly in ground with saddles and fixing screws properly complete all as specified.

Supply installation testing & commissioning and in replacement of single headed gun metal ISI marked oblique pattern hydrant landing valve with 80mm dia flanged inlet and 63mm dia .instantaneous type female outlet compelte with gun metal cap and GI chain twist release tyep lug and all accessories as per IS: 5290-1983 ( type a') complete all as specified and directed. Make : BIR/KIRLOSKAR/NETA

Supply installation testing & commissioning and in replacement of first aid fire hose real wall mounting swinging type complete with drum bracket 25mm dia complete with drum bracket 25mm dia ball (stop) valve and 20mm dia 36meter long high pressure 'heavy duty' hose reel tubing as per IS: 444 with gun metal shutt off nozzle having 5mm dia orifice complete all as specified and direcred(Note: The hose real shall strictly confirm to IS: 884 : 1985).

Supply installation testing & commsioning of non percolating flexiable hose (RRL type- A' ) ISI marked (IS:636) 63mm dia and 15meter long comeplete with instantaneous type gun metal 63mm dia ISI marked male and female couplings (IS:903) bound and riveted to hose pipe with copper rivets and 1.5mm dia copper wire comepete all as specified and directed.

Supply , installation, testing & commissioning and in replacement of Controlled percolating (CP) hose ISI marked (IS:8423) 63 mm dia and 15 meter long complete with instalaneous type gun mental 63mm dia ISI marked male & female couplings (IS:903) bound and rivated to hose pipe with copper rivets and 1.5 mm dia copper wire complete all as specified and directed

Supply, installation, testing & commissioning and in replacement of gun-metal 63 mm dia short branch pipes with 15 mm dia, Nozzles, ISI marked (IS:903) complete all as specified and directed.

Supply, installation, testing & commissioning and in replacement of indoor type hose cabinet boxes made of 18 guage mild steel sheet 800 x 600 x 250 mm with double door with 4mm thick glasses and door frame made 16 guage mild steel sheet painted fire red outside and brilliant white inside yard complete all as specified and directed.

Supply installation testing & commissiong and in replacement of cast iron slim seal water type non return valves PN 1.6 complete with matching flanges rubber insertion nuts bolts & washters etc complete(PN 1.6) of 150 MM dia complete all as specified and directed.

Supply, installation, testing & commissioning of Mild steel ERW pipe (IS:1239 Part-I) heavy class of 150 mm including cutting, screwing, welding etc. Complete with forged steel/butt welded fittings viz.Tees,bends,elbows,flanges,reducers,clamps/hangers etc. including cutting holes and chases in brick or RCC walls/slabs and making good the same complete including painting of pipes,fittings & steel work with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade complete all as specified and directed.

Supply, installation, testing & commissioning and in replacement of Mild steel ERW pipe (IS:1239 Part-I) heavy class of 100 mm including cutting, screwing, welding etc. Complete with forged steel/butt welded fittings viz.Tees,bends,elbows,flanges,reducers,clamps/hangers etc. including cutting holes and chases in brick or RCC walls/slabs and making good the same complete including painting of pipes,fittings & steel work with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade complete all as specified and directed.

Supply, installation, testing & commissioning and in replacement of Mild steel ERW pipe (IS:1239 Part-I) heavy class of 80 mm including cutting, screwing, welding etc. Complete with forged steel/butt welded fittings viz.Tees,bends,elbows,flanges,reducers,clamps/hangers etc. including cutting holes and chases in brick or RCC walls/slabs and making good the same complete including painting of pipes,fittings & steel work with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade complete all as specified and directed.

Supply installation, testing & commissioning and in replacement of cast irion gear/hand lever operated multi purpose soft seated wafer butterfly valve of 150 mm bore having centric disc construction one piece body, replaceable seal PN-1.6 pressure rating, SS-304 shaft, complette with matching flanges, rubber insertion, nuts, bolts & washers etc. complete all as specified and directed. Make : BIR/KIRLOSKAR/NETA

Supply, installation,commissioning & testing of fire alarm control panel complying with BS EN 54 5/8 loop panel with 99 detectors & 99 modules upto 200 detectors & modules(per each loop).The panel shall be miscroprocessor based networkable analogue addressable upto 200 nodes 8 loop fire alarm control panel with 2 loop card,640 character LCD display.The panel shall be equipped with sufficient nos.of loop. Each loop shall have a capacity of 127 analogue addressable devices in 1 loop,three access leavels,capable of taking EN-54 and LPCB approved devices.The panel shall be equiped wiht Alarm reduction manangement drift compensation,calibration,Alarm verfication using time delay algorithm that confirms the existence of smoke and heat over a programmed period, eliminating unwanted activations from transients data integrity due to ESP protocol using algorithms,.Error detection in 2 ways,parity check and checksum error detection.The panel shall be capable of Rapid response using the interrupt system from any device eg from operation of a call point to the system indicating fire condition typically less than 1.5 seconds.The facilities shall further include EPROM sufficient nos.of programmable realy conrol for controlling all System at fire pump room,monitoring of fire sprinkler/fire hydrant pump,240Volt AC power supply, foroperation automatic battery charger,24 Volt sealed lead acid batteries sufficient all as directed by Engr-in-Charge

Supply & laying and in replacement of 2 core 1.5 sqmm ATC twisted pair sheiled AL myler type with outer FRLS cable for fire alarm and detection system to be laid in channel/PV conduit ( The cost of channel /PVC conduit not be included in this rate) with all other accessories

Supply, laying and in replacement of 25mm dia mild steel Rigid Conduit for laying of above cable

Supply installation testing & commsioning and in replacement of Motor control centre electrical driven hydrant/sprinkler common main & jockey control panel 20 HP complete all as specified and directed with following configurations/features :- (i) Panel Swtich Gear description:- (a) Incomer:- 160 amps TPN, 25KA, MCCB Thermal Magnetic release. (b) Out going:- 100 Amps TPN, 15 KA,MCCB, Thermal Magnetic release 01 No with star delta starter for Hydrant Pump with necessary arrangement of contractors suitable for 30 KW, 3 phase motor. (c) Out going 100 Amps MCCB Thermal Magnetic relase 1 No. with star delta starter for Jockey Pump with necessary arrangement of contractors suitable for 10 KW, 3 phase motor. (d) Out going 63 Amps MCCB Thermal Magnetic relase 1 No. with star delta starter for Jockey Pump with necessary arrangement of contractors suitable for 10 KW, 3 phase motor. (e) Out going 63 Amps MCCB Thermal Magnetic relase 1 No. with star delta starter for Jockey Pump with necessary arrangement of contractors suitable for 7.5 KW, 3 phase motor (f) 63 Amps TPN. 15 KA, MCCB Thermal Magnetic release 02 nos and MCB of 32 Amps TPN, 15KA, 02 Nos are spare (ii)Starter Ammeters, voltmeters (iii)Indicating lamps (iv)Bus bars Note:- (i) The panel shall be factory made powder phosphatised coated of approved shade and shall be fabricated from one of manufacture i.e L&T / LEGRAND / SIEMENS / ABB / SCHNEIDER complete all as specified and directed. Make of MCCB, MCB : Legrand / Schneider / Siemens / L&T

Supply, installation, commissioning & testing and in replacement of addressable manual call point resettable. Analogue addressable manual call point ESP analogue addressable protcol having status LED for alarming & standby mode, electronically addressed, approved by LPCB. The unit shall have Rapid response using operation of a call point to the system indicating fire condition is typically less than 1.5 seconds, fast addressing technique, flexible (programmed in any sequence), automatic (stored in EEPROM), secure (cannot be chandged easily) and time saving features.

Supply, installation, commissioning & testing and in replacement of addressable fire alarm sounder/hooter qith sound level 100 dB tested by ERTL as per IS 2189 complete

Construction of masonry pits of following size 120x120x90cm (internal) for sluice valves etc with sub Class 'B' bricks straight or curved or plan exc 6 mtr mean radius built in CM 1:6 PCC 1:3:6 in foundation, 15 mm thick plaster in CM 1:4 on internal faces of walls, 40 mm thick, PCC 1:2:4 in floors including valve pit cover made out of MS sheet 2 mm thick with angle iron 40x40x6 mm frame with fixing hinges, locking arrangement hold fast and handle etc duly painted with two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation & earth work complete all as specified including breaking of existing broken/ damaged valve pit the contractor can utilize retrieved serviceable bricks