Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 10,75,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Ca No Cepz 07 2018 19 Provn Of Otm Accn For Armd Wksp Of 2(i) Armd Bde At North Of Lal Tikku Khad In Mamun Ph-ii
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_MES_242057_1Tender No
CEPZ-07/2018-19Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Lumpsum price worked out by the contractor for Plumbing work as listed in Schedule 'A' Part-IV.
1
-
574261.45
Lumpsum price worked out by the contractor for Site clerance as listed in Schedule 'A' Part-V.
1
-
20214869.75
Lumpsum price worked out by the contractor for protective work as listed in Schedule 'A' Part-VI.
1
-
26910662.5
Lumpsum price worked out by the contractor for Road and Path Work as listed in Schedule 'A' Part-VII.
1
-
10434471.7
Lumpsum price worked out by the contractor for Sewage disposal as listed in Schedule 'A' Part-VIII.
1
-
2319193.4
Lumpsum price worked out by the contractor for area drainage Works as listed in Schedule 'A' Part-IX.
1
-
2803187.65
Lumpsum price worked out by the contractor for Compound wall, fencing and steel Gate Works as listed in Schedule 'A' Part-X.
1
-
2583742.6
Lumpsum price worked out by the contractor for External Water Supply & Hot water supply as listed in Schedule 'A' Part-XI.
1
-
4273613.6
Lumpsum price worked out by the contractor for External Electrification as listed in Schedule 'A' Part-XII.
1
-
2641896.8
Lumpsum price worked out by the contractor for summer appliance & lighting protection as listed in Schedule 'A' Part-XIII.
1
-
51743.2
Lumpsum price worked out by the contractor for STAGING OF WATER TANK as listed in Schedule 'A' Part-XIV
1
-
2856387.7
Lumpsum price worked out by the contractor for Dismentling/ Demolition Of Buildings as listed in Schedule 'A' Part-XV.
1
-
1756191.6
Road sign boards comprising of of 1 plates of size 2100mm x 1200mm fixed, one above the another , made of 2mm thick aluminium sheet duly framed in 40 x 40 mm square MS pipe of 16 guage & provided with 25mm x 25mm hold fasts. The paltes fixed with aluminium rivets and written on both sides indicating the direction with single arrow on each plate with computer cut letters and signs (Reflective) as directed of appropriate size and white in cloours and Dennison HIP base blue. The boards (paltes) supported with bolts over a pair of legs made of MS square tubes 75mm x 75mm of 16 guage sheet of length (height) 11' each above ground including embedding in PCC (1:2:4) type B-1, blocks of size 60cm x 60m x 75cm making post holes & earth work.The pipes to be painted with two coats black & white synthetic enamel paint over a coat of red oxide primer (pegged sign boards fully reflective) complete all as directed.
2
-
-
Road sign boards comprising of of 1 plates of size 1500mm x 900mm fixed, one above the another , made of 2mm thick aluminium sheet duly framed in 40 x 40 mm square MS pipe of 16 guage & provided with 25mm x 25mm hold fasts. The paltes fixed with aluminium rivets and written on both sides indicating the direction with single arrow on each plate with computer cut letters and signs (Reflective) as directed of appropriate size and white in cloours and Dennison HIP base blue. The boards (paltes) supported with bolts over a pair of legs made of MS square tubes 75mm x 75mm of 16 guage sheet of length (height) 11' each above ground including embedding in PCC (1:2:4) type B-1, blocks of size 60cm x 60m x 75cm making post holes & earth work.The pipes to be painted with with two coats black & white synthetic enamel paint over a coat of red oxide primer (pegged sign boards fully reflective) complete all as directed.
15
-
-
Delineator road of size 47 x 600mm , dual directional Retro reflective round delineator made of 16 guage MS Pipe of outer da 47mm and powder caoted and have three regflective bands of colour white , red and yellow, protective with welded wire mesh, fixed in position in PCC (1:2:4) , foundation size 25cm x 25cm deep cleaning site complete all as directed. Make green lite of equvalent
40
-
-
Point wiring with 1.5 sqmm copper conductor cables (multistranded),unsheathed FRLS PVC insulated , (using colour code as per IS), 1100 Volts grade in and including concealed PVC rigid conduit thickness not less then 1.8mm, heavy duty (ISI marked) of adequate size with sunk cast iron/pressed terminal box with 3mm thick laminated sheet for one light /fan/bell/exhaust fan point controlled by one, one way switch including continuous 1.5 sqmm copper conductor (multistranded using colour code) FRLS, PVC insulated and unsheathed cable as earth wire and connected to earth dolly complete all as specified and conforming to IS-694 complete all as specified and directed.
1194
-
-
All as per item No 19 here-in-before but for one light point controlled by 2 way switches.
7
-
-
All as per item No 19 here-in-before but for one 3 pin socket outlet 5 Amps independent.
250
-
-
All as per item No 19 here-in-before but for one 3 pin socket outlet 5 Amps on same board.
165
-
-
Point wiring with 2.5 sqmm copper conductor cables (multistranded),unsheathed FRLS PVC insulated , (using colour code as per IS), 1100 Volts grade in and including concealed PVC rigid conduit thickness not less then 1.8mm, heavy duty (ISI marked) of adequate size with sunk cast iron/pressed terminal box 3mm thick laminated sheet of suitable modules for one 3 pin socket outlet 15 amps on independent board including continuous 2.5 sqmm copper conductor (multistranded using colour code) FRLS,PVC insulated and unsheathed cable earth wire and connected to earth dolly complete all as specified and conforming to IS-694 complete all as specified and directed..
145
-
-
Compact RCCB DP 32 amps, with 240V 10 KA breaking capacity all as specified and directed.
37
-
-
Compact RCCB DP 63 amps, with 240V 10 KA breaking capacity all as specified and directed.
9
-
-
Compact RCCB four pole 32 Amps, with 415V , 50 HZs, with 10 KA breaking capacity all as specified and directed.
2
-
-
Compact RCCB four pole 40 Amps, with 415V , 50 HZs, with 10 KA breaking capacity all as specified and directed.
2
-
-
MCB SP 6 to 32 amps, 240V with 10 KA breaking capacity all as specified and directed.
367
-
-
MCB SP 40 to 63 amps, 240V with 10 KA breaking capacity all as specified and directed.
8
-
-
MCCB TPN 4 way vertical sheet metal enclosures DB double door , 415V, 50Hz complete all as specified and directed.
8
-
-
MCCB four pole 415V, 50Hz, 100 Amp, 16 KA,thermal release adjustable type (70% to 100 % ) all as specified and directed.
2
-
-
MCCB TP 415V, 50Hz, 63 Amp, 16 KA,thermal release adjustable type (70% to 100 % ) all as specified and directed.
2
-
-
MCCB TP 415V, 50Hz, 40 Amp, 16 KA,thermal release adjustable type (70% to 100 % ) all as specified and directed.
4
-
-
Blanking plate for MCB DB's all as specified and directed.
69
-
-
Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including LED 15W lamp complete all as specified and directed.
150
-
-
Earthing complete with galvanized steel earth plate electrode 60 Cm X 60 Cm X 6 mm thick buried directly in ground (earth pit not lesss than 2.25m deep below normal ground level with top edge of plate not less than 1.5m below normal ground level, connecting to the GI earth wire of size 4mm size by means of bolts nuts, check nuts and protected by provision of GI medium grade pipe of 15 mm bore including provision of 40mm tk cover of RCC (1:2:4) reinforced with XPM (wt no lesss than 4kg/sqm) and frame of angle iron 40mmx40mmx6mm with 6mm dia MS bar handel made to shape, GI light grade 20mm Dia pipe for watering of suitable lenght placed on top edge of earth plate, commom salt and charcol filling, with fixing arrangement, funnel, wire mesh and excavation and earthwork in any type of soil, returning filling in and removal of surlupus soil to distance not exceeding 50m complete all as per plate no 3 of SSR 2009 part-I and connecting to earth test point all as spd and directed by engineer incharge and including testing on completion
NOTES:- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B, 80 mm thick reinforcement with 8 mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item .(ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe up to 7.50 m and the rate includes in the unit rate of item .(iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includes in the unit rate of item. (iv) The earth chamber shall be constructed 5 m away from the edge of the bldg pit and the cost of the same is deemed to be included in the rate quoted for this item.
41
-
-
Earthing complete with galvanized steel earth plate electrode 60 Cm X 60 Cm X 6 mm thick buried directly in ground (earth pit not lesss than 2.25m deep below normal ground level with top edge of plate not less than 1.5m below normal ground level, connecting to the GI earth Strip 32mm X 6mm mm size by means of bolts nuts, check nuts and protected by provisin of GI medium grade pipe of 40 mm bore including provision of 40mm tk cover of RCC (1:2:4) reinforced with XPM (wt no lesss than 4kg/sqm) and frame of angle iron 40mmx40mmx6mm with 6mm dia MS bar handel made to shape, GI light grade 20mm Dia pipe for watering of suitable lenght placed on top edge of earth plate, commom salt and charcol filling, with fixing arrangement, funnel, wire mesh and excavation and earth work in any type of soil, returning filling in and removal of surlupus soil to distance not exceeding 50m complete all as per plate no 3 of SSR 2009 part-I and connecting to earth test point all as spd and directed by engineer incharge and including testing on completion.NOTES:- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B, 80 mm thick reinforcement with 8 mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item .(ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe and the rate includes in the unit rate of item (iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includes in the unit rate of item .
20
-
-
Earthing complete with copper earth plate electrode 60 cm X 60 Cm X 3.15 mm thick buried directly in ground (earth pit not lesss than 2.25m deep below normal ground level with top edge of plate not less than 1.5m below normal ground level, connecting to the Copper earth Strip 20mm X 3.15mm size by means of bolts nuts, check nuts, fixed on suitable PVC/Porclain insulator and protected by provisin of GI medium grade pipe of 40 mm bore including provision of 40mm tk cover of RCC (1:2:4) reinforced with XPM (wt no lesss than 4kg/sqm) and frame of angle iron 40mmx40mmx6mm with 6mm dia MS bar handel made to shape, GI light grade 20mm Dia pipe for watering of suitable lenght placed on top edge of earth plate, commom salt and charcol filling, with fixing arrangement, funnel, wire mesh and excavation and earth work in any type of soil, returning filling in and removal of surlupus soil to distance not exceeding 50m complete all as per plate no 3 of SSR 2009 part-I and connecting to earth test point all as spd and directed by engineer incharge and including making test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and scerwed including 3nos.8mm dia 25mm long hex.head screw, testing on completion.
NOTES:- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B, 80 mm thick reinforcement with 8 mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item .(ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe and the rate includes in the unit rate of item (iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includes in the unit rate of item.
2
-
-
Galvanised earth lead wire 4.0 sq mm including requisite nut, bolt and washer complete all as specified and directed.
60
-
-
PVC rigid conduit pipe 20mm bore, thickness not less then 1.8mm,heavy grade (ISI marked) including all accessories, fixed to surface/recessed complete all as specified and directed.
400
-
-
LED street light fitting complete, 1X35 Watt, 230 volt, energy saving and environmental friendly long life versatile pressure dicast aluminium IP- 66 road way luminary with high power LED as light source and electronic driver complete mounted on wall/pole with 40mm dia 1.2 mtr long medium grade GI Pipe bent to shape mounted on wall with the help of 02 Nos suitable size of FI holding clamp with nuts, bolts and washers and making electrical connection with three core twisted flexible copper conductor cable of 1.0 sqmm size, PVC insulated unsheathed from ceiling rose to light fittings, complete with all accessories internally pre wired complete all as specified and directed. :-Make Wipro Cat Part No LR02-391-XXX-57-XX / Havels Cat Part No LHETAXU7UN6J035 /Philips Cat Part No BRP052LED036CWHPSLAFGSIPSUGR / Polycab Cat Part No PCGLS T1 35 L / CG Cat part No LSTS30CDL/ or equivalent of Crompton/Bajaj/Halonix
117
-
-
LED type tube light fitting including lamp, 1X20 watt 230 volts wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with all accessories internally pre wired and including connecting up with three core twisted flexible copper conductor cable of 1.00 sqmm size complete with all accessories complete all as specified and directed. Make Wipro cat part no LM34-251-XXX-57-SM / Havells Cat Part No EWEBP5IN1W020/Philips Cat Part No SM270CLED30S6500PSUWH/ CG Cat Part No LCLR6630CDL / Polycab Cat Part No INTENSOLXS LED BATTEN 4 FEET 20 W / or equivalent of Crompton/Bajaj/Halonix
601
-
-
LED type tube light box fitting including lamp, 1X10 watt 230 volts wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with all accessories internally pre wired and including connecting up with three core twisted flexible copper conductor cable of 1.00 sqmm size complete with all accessories complete all as specified and directed. Make Wipro/ Philips/CG/Polycab/BAJAJ/Havells/Crompton/Halonix.
4
-
-
Supply, installation testing and commisining of solar water heating system with ETC technology of capacity 300LPD with electric backup as recommendation of manufacturer suitable for single phase 220 V AC supply complete with ETC type collectors, hot water tank, tanks stands etc with the following sepcification.
(a) Collector ETC type with nos, size, level of vaccuam, transmmitance of cover glass tubes, reflectance of glass tubes, absorbence of glass tubes, type oof coating and reflectance of coating as recommended by manufactruer having wind resistance upto 100kM/hr with freezing resistance minus 20 degree centigrade and heating up coeffiecient 240 degree centigrade having thermal effenciecy not less than 58 percent and maximum rise in temperture 53 degree centigrade without nightloss fixed at angle of inclination from horizantal, as per recommendation of manufacturer.
(b) Hot Water Tank Hot water tank of 300ltr capacity made out of stainless steel sheet not lesss than 0.5mm tk duly insulated with PUFF insulation 50mm tk having density not less than 36kg/cum havig thermal condutivity 0.29m/k duly covered with PPGI cladding fixed with temperature gauge, inlet and outlet valves of suitable size duly installed on staging having fabricated out of ms angle of appropiate size as recommended by manufacture duly fixed properly and painted with two coat of anti corrosive paint over a coat of red oxide primer.
1
-
-
All as per item No 41.00 here-in-before but so have water heating system of 200LDP capacity with hot water tank 200 ltr capacity duly insulated and PPGI cladding including electric backup as recommendations of manufacturer.
5
-
-
All as per item No 41.00 here-in-before but so have water heating system of 100LDP capacity with hot water tank 100 ltr capacity duly insulated and PPGI cladding including electric backup as recommendations of manufacturer.
1
-
-
M&L for MS staging of size 3m high and 1m wide fabricated out of angle iron 60X60X6mm duly fixed properly and suitable MS plate on top for over head of 500ltr capacity for cold water installed near solar water heating system
6
-
-
M&L for PVC cold water storage tank with closed top hoisted and fixed position of 500ltr capacity
Note for serial item no 41,42,43 & 44
(a) MS staging for cold water, water tank, hot and cold water pipe wil be mesured and paid seperately
(b) any other item required for sucessful operation of system is deemed to be included in overall cost quoted
(c) five numbers spare ETc glass tubes with each system are to be supplied by the contractor withi the overall quoted cost
Make:- Intersolar/sunmagic/Bipin industries/tata BP solar/Boro solar
6
-
-
LED light fitting complete, 9 Watt, including lamp 230 volt, decorative (miror light) wall mounting type PVC extruded LED batten intigrated type complete with all accesssories internely pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make : Havells/Philips /Bajaj /Halonix/WIPRO/Polycab/Crompton/ Halonix.
27
-
-
LED light bulk head fitting complete, 10 Watt, including lamp 230 volt, decorative, wall mounting type complete with all accesssories internely pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make : Havells/Philips /Bajaj /Halonix/WIPRO/Polycab/Crompton/ Halonix.
1
-
-
Surface mounted LED down lighter fitting complete (Porch light) in powder coated white funish with integrated electronic driver 21 watt LED 5700 K complete with all accessories internally pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size complete with all accessories complete all as specified and directed. Make:Havells/Philips /Bajaj /Halonix/WIPRO/Polycab/Crompton/ Halonix.
2
-
-
MS junction box out door type of size 250 mm x 250 mm x 150 mm made from 14 gauge MS sheet with front openable hinged cover complete with four number aluminium bus bars mounted on porcelain insulator including clamps of MS flat iron 25 x 3 mm with bolts and nuts and one MCB SP up to 6A, 10 KA for ON/OFF street light to fixed on pole all as specified and directed. (Note:- Box to be painted inside and outside with two coats of Aluminium paint over a coat of red oxide primer)
50
-
-
40W LED street light luminaire pressure die cast housing with epoxy power coated dark graphite grey colour finish prismatic polycarbonate cover with individual LED lenses complete and GI brackets bent to shape 40 mm dia GI pipe Medium grade 1.5 mtr long by providing 2 Nos clamps made out of 50x6mm Ms flat including suitable size fabricated to the required shape and fixed with suitable size of nuts and bolts bracket sets etc including two coats of enamel painting over a coat of red oxide primer including proper connection from junction box to street light fitting through PVC insulated copper conductor 1.00 Sqmm 3 core cord flexible cable drawn inside thriough the pole from junction box to security light fittings complete all as specified and directed.Make Wipro Cat Part No LR02-451-XXX-57-XX, Havels Cat Part No LHETAXU7UN6J040 /Philips Cat Part No BRP409LED040CWHDMRFGGSIPSUGR / Polycab Cat Part No PCGLS T1 40 / equivalent of Crompton/CG/Bajaj/Halonix.
Note:-Ms clamp including nuts and bolts and GI pipe for bracket shall be measured and paid seperately under relative item.
50
-
-
Integral bollards complete with 9 watt LED fixed on PCC Base having suitable MS junction box complete including proper connection from junction box to light fitting through PVC insulated copper conductor1.0 Sqmm 3 core cord flexible cable complete including MS suiable MS juction box with single phase aluminium bus bar of 50Amp capacity fixed on suitable insulators. all as specified and directed. Make:Havells/Philips/Bajaj /Halonix/WIPRO/Polycab/Crompton.
Note:-Ms clamp including nuts and bolts and GI pipe for bracket shall be measured and paid seperately under relative item
20
-
-
LED 25W Post top lantern fittings complete with lamp die cast aluminium spigot with high efficient LEDs and polycarbonate diffuser IP65 complete and fixed on 40 mm dia GI pipe medium grade of suitable length in PCC including suitable MS juction box with single phase aluminium bus bar of 50Amp capacity fixed on suitable insulators and making connections with PVC insulated copper conductor 1.0 Sqmm 3 core cord flexible cable complete all as specified and directed. “ MakeHavells/Philips/Bajaj/Halonix/WIPRO/Polycab/Crompton.
Note:-Ms clamp including nuts and bolts and GI pipe for bracket shall be measured and paid seperately under relative item.
12
-
-
Exhaust fan 305mm sweep, single phase, 1400 RPM, heavy duty with louver shutter and connecting with electrical system, including provision of cable copper flexible, PVC three core 23/0.0076 from ceiling rose to fan and grouting of holding down bolts in and including PCC M-15(nominal mix) blocks complete all as specified.Make:- Bajaj/havells/CG
36
-
-
Sub main wiring with two run of single core,4 sqmm FRLS PVC insulated and unsheathed, multi stranded copper conductor cable using ,colour code, red for phase and black for neutral including 4 sqmm FRLS PVC insulated and unsheathed copper conductor multistranded cable in green colour connected to and connected to earth dolly drawn in and including concealed PVC rigid conduit of suitable size having thickness not less than 1.8mm, heavy grade (ISI marked) with and including all accessories, fixed to surface/recessed complete all as specified and directed.
Note:-Three run 4 sqmm copper conductor cable for phase, neutral and earth and one run of PVC conduit shall be measured as one unit.
140
-
-
Sub main wiring with two run of single core,6 sqmm FRLS PVC insulated and unsheathed, multi stranded copper conductor cable using ,colour code, red for phase and black for neutral including 6 sqmm FRLS PVC insulated and unsheathed copper conductor multistranded cable in green colour connected to and connected to earth dolly drawn in and including concealed PVC rigid conduit of suitable size having thickness not less than 1.8mm, heavy grade (ISI marked) with and including all accessories, fixed to surface/recessed complete all as specified and directed.
Note:-Three run 6 sqmm copper conductor cable for phase, neutral and earth and one run PVC conduit shall be measured as one unit.
600
-
-
Sub main wiring with Four run of single core,6 sqmm FRLS PVC insulated and unsheathed, multi stranded copper conductor cable using ,colour code, red for phase and black for neutral including Two run 6 sqmm FRLS PVC insulated and unsheathed copper conductor multistranded cable in green colour connected to and connected to earth dolly drawn in and including concealed PVC rigid conduit of suitable size having thickness not less than 1.8mm, heavy grade (ISI marked) with and including all accessories, fixed to surface/recessed complete all as specified and directed.
Note:-six run 6 sqmm copper conductor cable for phase, neutral and earth and one run PVC conduit shall be measured as one unit.
40
-
-
Sub main wiring with Four run of single core,10 sqmm FRLS PVC insulated and unsheathed, multi stranded copper conductor cable using ,colour code, red for phase and black for neutral including Two run 10 sqmm FRLS PVC insulated and unsheathed copper conductor multistranded cable in green colour connected to and connected to earth dolly drawn in and including concealed PVC rigid conduit of suitable size having thickness not less than 1.8mm, heavy grade (ISI marked) with and including all accessories, fixed to surface/recessed complete all as specified and directed.
Note:-six run 10 sqmm copper conductor cable for phase, neutral and earth and one run PVC conduit shall be measured as one unit.
40
-
-
Ceiling fan 1200mm sweep 5 star BEE rating, connecting up including making connection from ceiling rose to connector of fan with 1.00 sqmm of 3.00 core of copper flexible cable complete all as specified. Make:-Bajaj / CG/HAVELLS
254
-
-
Supply & Install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with 5 star rating & EER 3.5 with hot & cold facility of capacity 1.5 TR including suitable size of copper tubings from outdoor unit to indoor unit duly inusulated as per manufacture instruction. complete all as specified and directed. Make :- Voltas , Hitachi, Daikin, O-General, LLYOD
Note:- any length of copper tubings with insulation is deemed to be included in the quoted rates.
6
-
-
Supply and fix refrigerator, electric driven (single phase), 220 Volt AC supply capacity 310 Litres BEE 5 star rated complete all as specified and directed. Make- Voltas, Whirlpool, LG, Samsung.
2
-
-
Supply and fix refrigerator, electric driven (single phase),220 Volt AC supply capacity 195 Litres BEE 5 star rated complete all as specified and directed. Make- Voltas, Whirlpool, LG, Samsung.
4
-
-
Deep Freezer hard top 320 ltr capacity having double door BEE 5 star rated (single phase),220 Volt AC supply complete all as specified and directed. Make: LG /Samsung / Whirlpool / Bluestar.
1
-
-
Voltage stabilizer for automatic operation, single phase as per BIS 8448:1989 reaffirmed 2003 naturally air cooled, digital display, copper wound, wall mount, indoor type with digital voltmeter & designed for input voltage variation between 140 to 280 Volt with output voltage stabilised at 220 volt tolerence of 9% with capacity 5kVA complete all as spd and as directed.
6
-
-
Voltage stabilizer for automatic operation, single phase as per BIS 8448:1989 reaffirmed 2003 naturally air cooled, digital display, copper wound, wall mount, indoor type with digital voltmeter & designed for input voltage variation between 140 to 280 Volt with output voltage stabilised at 220 volt tolerence of 9% with capacity 1kVA complete all as spd and as directed.
3
-
-
Voltage stabilizer for automatic operation, single phase as per BIS 8448:1989 reaffirmed 2003 naturally air cooled, digital display, copper wound, wall mount, indoor type with digital voltmeter & designed for input voltage variation between 140 to 280 Volt with output voltage stabilised at 220 volt tolerence of 9% with capacity 0.5kVA complete all as spd and as directed.
4
-
-
Servo controlled voltage stablizer 150 KVA capacity (confirming as per BIS:9815: Part 1 : 1994 reaffirmed 2009) three phase, 50Hz, naturally oil cooled, indoor/outdoor, unbalanced type, copper wound, digital display type, relay free smooth and silent operation with first filling of transformer oil (IS335: 1993 reaffirmed 2005) having following specification:
1. input voltage 300V-480V or as per ground requirements
2. output volatage stablized at any designed/desired voltage 415 tolerence 1% (adjustable)
3. Rated frequency 50Hz
4. No distortion in wave form
5.REsponce time not to exceed 10 mille seconds
6.sensitivity tolerence 1%
7.Rate of correction 8 Volt/second for single phase and 20 volt/second for phase to phase
8.No load losses less than 0.5 percentage
9.Full load losses less than 2.5%
10.Duty cycle-continous 24X7
11.Efficiency more than 95%
12. Type of load three phase, unbalanced type
13 Digital display voltmeter/ampmeter
1
-
-
Supply, Installation, testing and commissioning of HT 11 KV junction box outdoor type (IP 55) of size 1.2m x 0.9m x 0.90m made up of 3.15 mm CRCA sheet welded to angle iron 40x40x6 mm on all sides, slanted top with 15 cm projection all sides with openable shutter on both sides having locking arrangement, totally enclosed, weather proof spray painted internally and externally with two coats of synthetic enamelled paint over a coat of red oxide primer, suitable for 11 KV confirming to IP 54, 03 nos aluminium busbar of capacity 400 Amp mounted on HT insulator connected to two nos independent earthing lead (width of the panel not less than 75 cm) including legs of panel of 90 cm height made up of angle iron 50x50x6 mm grouted in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate, upto 30 cm below ground level complete including suitable steel fencing around the panel complete all as directed and as specified.
6
-
-
HT XLPE insulated, armoured, heavy duty electric aluminium conductor, PVC sheathed galvanised steel strip or wire, armoured electric power cables, with aluminium stranded conductor 6.35/11kVA earthed grade as per IS 7098(part-II), cross sectoinal area 95 Sqmm, 3 core laid in trenches/road crossing/under floor/on walls/on poles including clamps and testing complete all as specified.
1900
-
-
LT XLPE insulated, armoured, heavy duty electric aluminium conductor, PVC sheathed galvanised steel strip or wire, armoured electric power cables, with aluminium stranded conductor 1100 volts grade, cross sectoinal area, 185Sqmm, 3.5 core laid in trenches/road crossing/under floor/on walls/on poles in (two runs) including clamps and making connection with suitable size of aluminium thimbles, nuts and bolts, cable glands, testing complete all as specified.
Note:-Excavation and earthwork shall be measured and paid seperately
45
-
-
LT XLPE insulated, armoured, heavy duty electric aluminium conductor, PVC sheathed galvanised steel strip or wire, armoured electric power cables, with aluminium stranded conductor 1100 volts grade, cross sectoinal area, 150 Sqmm, 3.5 core laid in trenches/road crossing/under floor/on walls/on poles including clamps and testing complete all as specified.
Note:-Excavation and earthwork shall be measured and paid seperately
300
-
-
LT XLPE insulated, armoured, heavy duty electric aluminium conductor, PVC sheathed galvanised steel strip or wire, armoured electric power cables, with aluminium stranded conductor 1100 volts grade, cross sectoinal area, 70 Sqmm, 3.5 core laid in trenches/road crossing/under floor/on walls/on poles including clamps and making connection with suitable size of aluminium thimbles, nuts and bolts, cable glands ,testing complete all as specified.
Note:-Excavation and earthwork shall be measured and paid seperately
350
-
-
LT XLPE insulated, armoured, heavy duty electric aluminium conductor, PVC sheathed galvanised steel strip or wire, armoured electric power cables, with aluminium stranded conductor 1100 volts grade, cross sectoinal area, 25 Sqmm, 4 core laid in trenches/road crossing/under floor/on walls/on poles including clamps and making connection with suitable size of aluminium thimbles, nuts and bolts, cable glands testing complete all as specified.
Note:-Excavation and earthwork shall be measured and paid seperately
430
-
-
LT XLPE insulated, armoured, heavy duty electric aluminium conductor, PVC sheathed galvanised steel strip or wire, armoured electric power cables, with aluminium stranded conductor 1100 volts grade, cross sectoinal area, 6 Sqmm, 2 core laid in trenches/road crossing/under floor/on walls/on poles including clamps and making connection with suitable size of aluminium thimbles, nuts and bolts, cable glands testing complete all as specified.
Note:-Excavation and earthwork shall be measured and paid seperately
250
-
-
LT XLPE insulated, armoured, heavy duty electric aluminium conductor, PVC sheathed galvanised steel strip or wire, armoured electric power cables, with aluminium stranded conductor 1100 volts grade, cross sectoinal area, 16 Sqmm,2 core laid in trenches/road crossing/under floor/on walls/on poles including clamps and making connection with suitable size of aluminium thimbles, nuts and bolts, cable glands testing complete all as specified.
Note:-Excavation and earthwork shall be measured and paid seperately
650
-
-
LT XLPE insulated, armoured, heavy duty electric aluminium conductor, PVC sheathed galvanised steel strip or wire, armoured electric power cables, with aluminium stranded conductor 1100 volts grade, cross sectoinal area, 6 Sqmm, 4 core laid in trenches/road crossing/under floor/on walls/on poles including clamps making connection with suitable size of aluminium thimbles, nuts and bolts, cable glands and testing complete all as specified.
Note:-Excavation and earthwork shall be measured and paid seperately
1650
-
-
Supply, Instaling, testing and commissioning Outdoor type , plinth mounted transformer powder coated capacity 315 KVA step down copper wound, oil cooled with all standard fitting HT 11KV 3 Phase and LT 433 volts 3 phase 4 wire, 50 C/S oil immersed naturally cooled with externally cooling tube delta connection on primary HT 11 KV side and star connection on secondary LT 433V, having tapping at + 2.5%, to + 5.0% & + 7.5% on HV side and to be changed by means of hand operated off load/tap changing gear including first filling of new transformer oil of dielectic strength not less than 40 KV with all fitting and accessories such as LT box at LT side, silica gel breather, oil level indicator conservator tank with oil level indicator, drain out valve (oil tank), exhaust vent, air release valve, temperature gauge and cast iron wheel etc all as IS-1180 complete all as specified and directed.Note : Necessary manufacturer certificate to be obtained for 99% copper purity.
1
-
-
Construction of platform of size 3000 x 2500 x 1200mm for installation of transformer , with fly ash brick steps on one side, cattle fencing arround complete platform and separate fencing arround transformer both fencing should have hinged door and locking arrangements completee complete all as specified & showing on drg No. CEPZ/TD-35/08 Sheet 1/2 as directed .
1
-
-
Supply and erecting in vertical position of two pole structure, steel tubular swaged poles, type 410, SP-55(11m) with300X300X6mm MS plate continuously welded to pole, finial taper plug, bolts, nuts and screws all as per specified including factory painted with two coats of black bitminious paint internally throughout and externally for embedded portion and applying one coat of red oxide primer, making five nos strips each 30cm high with super enamel paint (black and yellow) from GL/ coping upto 1.5m painting with two coats of aluminium paint for the remaining paint .Note:- PCC foundation, coping, excavation and earthwork shall be measured and paid separately under relative items.
3
-
-
Supply and fixing of automatic street light switch using infrared sensor based Nature switch for automatic switiching of street lights based on lux level of nature light. Lumincance for switching ON is lessthan or equal to 30 Lux and for switching OFF greater than equal to 10 Lux level. The sensor (nature switch) alongswitch suitable power contactors, incoming and outgoing MCBs, automanual (sensors by pass) selection option, support terminals etc should be enclosed in pole/wall mountable enclosure made of rust proof, electric shock proof termite proof and FR grade SMC jnction box conforming to IP-54 dgree og ingress, three phase upto 5 kW lightening load capacity including mounting bracket, cable glands openable doors with lock complete all as specified and directed. the contractors, MCB and circuit wiring should suitable enough to take load upto 05 kW equally distributed over three phase and street timer should comprising of following:- input MCB(3nos) rating: 20 Amps contractor (3nos) rating 16-20 amps per phase output MCB (03) Nos rating : 20 Amps three phase circuit wiring : 10 sqmm copper wire Model No SWADEEP-02EC 5kW3P Make:- Katatiya Energy system ltd or equivalent .
3
-
-
Cable path indicators made out of cast iron plate of minimum 100mm dia & 4mm thick, indicators HT cable 11kV grade and voltage written on it as directed and fixed on M.S angle iron with minimum two numbers of nuts and bolts or riveted. The nuts shall be tack welded with bolts after full tightening. The size of MS angle iron shall be 30mm x 30mm x 6mm and length shall be 900mm to ensure minimum planting depth of 600mm below ground level. Bottom end of angle iron shall be anchor type and embedded in PCC 1:3:6 type C-1 with using 20mm graded stone aggregate of block size 200x200x300mm. MS angle iron shall be painted with one coat of red oxide primer throughout length and thereafter, painted with two coats of synthetic enamel paint blue colour above ground level and bituminous paint on the portion below ground level complete all as directed. ”
100
-
-
All as per item no 80here in before but for LT cable 1100 Volte grade.
250
-
-
Supply, installation, testing and commissioning of PCC platform mounted LT panel outdoor type factory fabricated made out of CRCA sheet of 3.15 mm thick ,fully enclosed and angle iron frame of size 40 x 40 x 6mm thick and T section with front openable Double Door shutter, dust and vermin proof and rear opening complete with locking arrangement, having a system of alminium bus bar of 800 Amps duly insulated and mounted on Epoxy/porcelain insulators in totally enclosed chamber with three phase and neutral 415 volts ,AC ,system prewired with suitable copper wire PVC insulated with all control accessories ,duly powder coated of approved and over a coat of red oxide primer having sufficient free space complete, including making connection from bus bar to all out going MCCBs including aluminium bus bar /suitable size os standard copper conductor cable complete as directed by engineer in charge the following accessories comprising of the following (Panel A) :-
1
-
-
[a] ACB 630 Amps 50 KA Four pole 415 volts draw-out type - 01 No (Incomer)
[b] MCCB 315 Amps 35 KA Four pole 415 volts with thermal mag release - 01 No (O/G)
[c] MCCB 250 Amps 25 KA Four pole 415 volts with thermal mag release - 01 No (O/G) (as spare)
[d] MCCB 125 Amps 25 KA Four pole 415 volts with thermal mag release - 03 No (O/G)
[e] Copper busbar sleeve insulated 800 Amps capacity TPN mounted on epoxy insulators - 01 Set
[f] Digital voltmeter 0 - 500 V range 96 x 96 sqmm size with four way selector switch - 01 No
[g] Digital ammeter 0 - 800 A range 96 x 96 sqmm size with four way selector switch and CTs - 01 No
[h] Cable entry glands and two No. earthing terminals
(j) Set of indicating lamp with toggle switch RYB -01 Set. (k) grouting of angles deemed to be included in the item rate . No extra payment will be made. Note :- PCC will be measured and paid seperately under relative item. The panel shall be front operated with cable entry from the bottom with cable glands.
-
-
-
Supply, installation, testing and commissioning of PCC platform mounted LT panel outdoor type factory fabricated made out of CRCA sheet of 3.15 mm thick ,fully enclosed and angle iron frame of size 40 x 40 x 6mm thick and T section with front openable Double Door shutter, dust and vermin proof and rear opening complete with locking arrangement, having a system of bus bars of aluminium 160 Amps duly insulated and mounted on Epoxy/porcelain insulators in totally enclosed chamber with three phase and neutral 415 volts ,AC ,system prewired with suitable copper wire PVC insulated with all control accessories ,duly powder coated of approved and over a coat of red oxide primer having sufficient free space complete, including making connection from bus bar to all out going MCCBs including aluminium bus bar /suitable size os standard copper conductor cable complete as directed by engineer in charge the following accessories comprising of the following(Panel B) :-
1
-
-
[a] MCCB 100 Amps 25 KA Four pole 415 volts with adjustable thermal magnetic release- 01 No (Incomer)
[b] MCCB 63 Amps 16 KA Four pole 415 volts with thermal mag release- 01 No (O/G)
[c] MCCB 40 Amps 16 KA Four pole 415 volts with thermal mag release - 01 No (O/G)
[d] MCB 32 Amps 16 KA TP 415 volts - 03 No (O/G)
[e] Aluminium bus bars sleeve insulated 160 Amps capacity TPN mounted on epoxy insulators - 01 Set
[f] Digital voltmeter 0 - 500 V range 96 x 96 sqmm size with four way selector switch - 01 No
[g] Digital ammeter 0 - 300 A range 96 x 96 sqmm size with four way selector switch and CTs - 01 No
[h] Cable entry glands and two No. earthing terminals
(j) Set of indicating lamp with toggle switch RYB -01 Set. (k) grouting of angles deemed to be included in the item rate . No extra payment will be made. Note :- PCC will be measured and paid seperately under relative item.
The panel shall be front operated with cable entry from the bottom with cable glands.
-
-
-
Supply, installation, testing and commissioning of PCC platform mounted LT panel outdoor type factory fabricated made out of CRCA sheet of 3.15 mm thick ,fully enclosed and angle iron frame of size 40 x 40 x 6mm thick and T section with front openable Double Door shutter, dust and vermin proof and rear opening complete with locking arrangement, having a system of bus bars of aluminium 400 Amps duly insulated and mounted on Epoxy/porcelain insulators in totally enclosed chamber with three phase and neutral 415 volts ,AC ,system prewired with suitable copper wire PVC insulated with all control accessories ,duly powder coated of approved and over a coat of red oxide primer having sufficient free space complete, including making connection from bus bar to all out going MCCBs including aluminium bus bar /suitable size os standard copper conductor cable complete as directed by engineer in charge the following accessories comprising of the following (Panel C) :-
1
-
-
[a] MCCB 315 Amps 25 KA Four pole 415 volts with adj thermal mag release- 01 No (Incomer)
[b] MCCB 250 Amps 25 KA Four pole 415 volts with thermal mag release - 01 No (O/G)
[c] MCB 32 Amps 10 KA TPN 415 volts - 02 No (O/G)
[d] Aluminium bus bar sleeve insulated 400 Amps capacity TPN mounted on epoxy insulators - 01 Set
[e] Digital voltmeter 0 - 500 V range 96 x 96 sqmm size with four way selector switch - 01 No
[f] Digital ammeter 0 - 400 A range 96 x 96 sqmm size with four way selector switch and CTs - 01 No
[g] Cable entry glands and two No. earthing terminals
(h) Set of indicating lamp with toggle switch RYB -01 Set. (j) grouting of angles deemed to be included in the item rate . No extra payment will be made. Note :- PCC will be measured and paid seperately under relative item
The panel shall be front operated with cable entry from the bottom with cable glands.
-
-
-
Supply, installation, testing and commissioning of PCC Platform mounted LT panel outdoor type factory fabricated made out of CRCA sheet of 3.15 mm thick ,fully enclosed and angle iron frame of size 40 x 40 x 6mm thick and T section with front openable Double Door shutter, dust and vermin proof and rear opening complete with locking arrangement, having a system of Aluminium bus bars of 160 Amps duly insulated and mounted on Epoxy/porcelain insulators in totally enclosed chamber with three phase and neutral 415 volts ,AC ,system prewired with suitable copper wire PVC insulated with all control accessories duly powder coated of approved and over a coat of red oxide primer having sufficient free space complete, including making connection from bus bar to all out going MCCBs including aluminium bus bar /suitable size os standard copper conductor cable complete as directed by engineer in charge the following accessories comprising of the following , (Panel D) :-
1
-
-
[a] MCCB 125 Amps 25 KA Four pole 415 volts with adj thermal mag release- 01 No (Incomer)
[b] MCCB 100 Amps 16 KA Four pole 415 volts with adj thermal mag release- 01 No (O/G) to Panel F
[c] MCCB 63 Amps 16 KA Four pole 415 volts with thermal mag release - 02 No (O/G)
[d] MCCB 32 Amps 16 KA Four pole 415 Volts - 03 No (O/G)
[e] Aluminium bus bars sleeve insulated 160 Amps capacity TPN mounted on epoxy insulators - 01 Set
[f] Digital voltmeter 0 - 500 V range 96 x 96 sqmm size with four way selector switch - 01 No
[g] Digital ammeter 0 - 300 A range 96 x 96 sqmm size with four way selector switch and CTs - 01 No
[h] Cable entry glands and two No. earthing terminals
(j) Set of indicating lamp with toggle switch RYB -01 Set. (k) grouting of angles deemed to be included in the item rate . No extra payment will be made. Note :- PCC will be measured and paid seperately under relative item The panel shall be front operated with cable entry from the bottom with cable glands.
-
-
-
Supply, installation, testing and commissioning of PCC platform mounted LT panel outdoor type factory fabricated made out of CRCA sheet of 3.15 mm thick ,fully enclosed and angle iron frame of size 40 x 40 x 6mm thick and T section with front openable Double Door shutter, dust and vermin proof and rear opening complete with locking arrangement, having a system of Aluminium bus bars of 160 Amps duly insulated and mounted on Epoxy/porcelain insulators in totally enclosed chamber with three phase and neutral 415 volts ,AC ,system prewired with suitable copper wire PVC insulated with all control accessories duly powder coated of approved and over a coat of red oxide primer having sufficient free space complete, including making connection from bus bar to all out going MCCBs including aluminium bus bar /suitable size os standard copper conductor cable complete as directed by engineer in charge the following accessories comprising of the following (Panel E) :-
1
-
-
[a] MCCB 125 Amps 16 KA Four pole 415 volts with adj thermal mag release- 01 No (Incomer)
[b] MCCB 100 Amps 16 KA Four pole 415 volts with thermal mag release- 01 No (O/G)
[c] MCCB 32 Amps 16 KA Four pole 415 Volts - 04 No (O/G)
[d] Aluminium bus bars sleeve insulated 160 Amps capacity TPN mounted on epoxy insulators - 01 Set
[e] Digital voltmeter 0 - 500 V range 96 x 96 sqmm size with four way selector switch - 01 No
[g] Digital ammeter 0 - 300 A range 96 x 96 sqmm size with four way selector switch and CTs - 01 No
[h] Cable entry glands and two No. earthing terminals
(j) Set of indicating lamp with toggle switch RYB -01 Set. (k) grouting of angles deemed to be included in the item rate . No extra payment will be made. Note :- PCC will be measured and paid seperately under relative item The panel shall be front operated with cable entry from the bottom with cable glands.
-
-
-
Supply, installation, testing and commissioning of PCC Platform mounted LT panel outdoor type factory fabricated made out of CRCA sheet of 3.15 mm thick ,fully enclosed and angle iron frame of size 40 x 40 x 6mm thick and T section with front openable Double Door shutter, dust and vermin proof and rear opening complete with locking arrangement, having a system of Aluminium bus bars of 125 Amps duly insulated and mounted on Epoxy/porcelain insulators in totally enclosed chamber with three phase and neutral 415 volts ,AC ,system prewired with suitable copper wire PVC insulated with all control accessories , duly powder coated of approved and over a coat of red oxide primer having sufficient free space complete, including making connection from bus bar to all out going MCCBs including aluminium bus bar /suitable size os standard copper conductor cable complete as directed by engineer in charge the following accessories comprising of the following (Panel F) :-
1
-
-
[a] MCCB 100 Amps 16 KA Four pole 415 volts with fixed thermal mag release- 01 No (Incomer)
[b] MCCB 63 Amps 16 KA Four pole 415 volts with thermal mag release- 01 No (O/G)
[c] MCCB 32 Amps 10 KA FP - 02 No (O/G)
[d] Aluminium busbar sleeve insulated 125 Amps capacity TPN mounted on epoxy insulators - 01 Set
[e] Digital voltmeter 0 - 500 V range 96 x 96 sqmm size with four way selector switch - 01 No
[f] Digital ammeter 0 - 300 A range 96 x 96 sqmm size with four way selector switch and CTs - 01 No
[g] Cable entry glands and two No. earthing terminals
(j) Set of indicating lamp with toggle switch RYB -01 Set. (k) grouting of angles deemed to be included in the item rate . No extra payment will be made. Note :- PCC will be measured and paid seperately under relative item The panel shall be front operated with cable entry from the bottom with cable glands. .
-
-
-
Supply, installation, testing and commissioning of silent, Diesel engine driven factory assembled, floor mounted generating set of capacity 160KVA/128 KW at 0.8 power factor or nearest higher size, 3 phase, 4 wire, 50 Hz as per IS 10002 to take 10% overload complete with safety control and metering equipments mounted on & including common base frame with acoustic enclosure (canopy), weather proof as per CPCB norms, powder coated all as per manufacturer's instructions manual and all as specified and comprising of the items/ accessories listed hereinafter:-
1
-
-
(A) Prime Mover : Directly coupled diesel engine, water cooled for deriving 160 KVA capacity, alternator electric start, four stroke confirming to latest IS-10002 for continuous running and capable for taking 10% over load for 01 hour complete with following accessories:-(i) Fly wheel to suit flexible coupling. (ii) Flexible coupling with guards. (iii) Air cleaner with filters. (iv) Lubricating oil filter (v) Heavy duty radiator assembly with fan. (vi) Anti-vibration pads as recommended by manufacturers. (vii) PT pump with electronic gevernor of suitable capacity. (viii) Self starter 24 volts DC. (ix) Necessary arrangement for charging battery. (x) Maintenance free battery 12 volts, 180 AH, duly charged -02 Nos, as recommended by manufacturer alongwith flexible copper battery lead and connector. Make :- Exide / Supersonic / Ameron (xi) Battery rack made out of MS angle iron 40 mm x 40 mm x 5 mm & 150 mm height - 01 No.(xii) Standard safety device. (xiii) Fuel tank as per manufacture recomendations enclosed within the canopy with level indicator including inlet, fuel outlet fuel connection pipe drain plug, air vent and locking arrangements etc including fuel pipe connections as per manufacture recomendations
(ixv) Exhaust system shall be provided with thermal insulation by using fire retardant/ non igniting foam conforming to BS-4735 to prevent excess heat radiation on the engine and safe for operator. (xv) Mechanical panel having following accessories :- (aa) Digital Lubrication oil temperature guage - 01 No. (ab) Digital Lubrication oil pressure guage - 01 No. (ac) Digital Water temperature guage - 01 No. (ad) Starting switch with key - 01 No. (ae) Battery voltmeter.
-
-
-
(af) Indicator lamp etc.(ag) Digital Ammetar DC-01 No.(ah) Digital RPM meter-01 No.(aj) Safety measures:- (i) Low lubricant oil pressure trip. (ii) High coolent temp trip.(iii) Engine over speed trip.(iv) Battery charging alternator.(v) Emergency stop pressed.
(B) Alternator : Self regulated 3 phase with neutral 415 volts 50 Hz as per IS : 13364 complete with automatic voltage regulator and foot mounted including making cable connection. (C) Control AMF Panel: AMF control panel inside the floor mounted accoustic enclosure suitable for 160 KVA DG set with bypass assessment including all necessary operating and control device (to meet the requirement of above capacity plus 25% over load) such as contactors, MCCBs, CTs, volts meter, Ammeter, indicating lamp, frequency meter, energy meter with protection fuses for panel instrument battery charging ststem with indicator and cut off relays low and high oil pressure, high speed over load and earth fault protection, reverse current protection duly wired copper conductor cable and cable connection with lugs/thimbles complete as recommended by manufacturers and as directed. (D) Repair tools and 2 years maintenance spare parts as per following:- Repair Tools :- (i) Ring spanner set of 10- 01 set. (ii) Screw driver 6”, 8”, 12”, 14” & 24”-02 each (iii) Double End Spanner set of 10 -01 set.(iv) Adjustable spanner 12” – 04 Nos.(v) Cutting pliers – 01 No. (vi) Techo meter- 01 No.(vii) Tools kit box (only box) – 01 No. 2 Years' Spares :- (a) Fan belt set complete - 01 No (b) Lub oil filter - 01 Set (c) Fuel filter - 01 Set (d) Service manual and spare part catalog with guarantee card (e ) Shock treatment chart dully framed - 01 Set (f) First Aid Box - 01 set (g) Fire extinguisher foam type - 01 set (h) Fire extinguisher (Class 'A' &Class 'B' Type ) - 01 set. Make Engine :- Kirloskar Green Model No. 6K1080TA G2 / Mahindra Powerol / Cummins / Catter Pillar Alternator :- Make:- Kirloskar Electric / Crompton Greaves / Catter Pillar / Volvo .
-
-
-
(E) ACCOUSTIC ENCLOSURE :- Acoustic enclosure (canopy) suitable for 160 KVA DG with the following provisions/ specifications :- (i) The enclosure as per manufacture recommendation. (ii) The sheet metal components are hot dip seven tank pretreated. (iii) It is pure polyester based powder coated (inside as wall as outside). All nuts/bolts/hardwares are zinc coated with salt spray test as per ASTMB- 117. (iv) Battery is accommodated in a tray in the enclosure. (v) The doors are fitted with gasket with high quality EPON gasketed to avoid leakage of sound. (vi) Sound proofing of enclosure is done with high quality rock wool/mineral wool conforming to IS 8131 of 50 mm thickness and density of 96 kg/cum. (vii) The wool is further covered with fiber glass cloth and perforated powder coated sheet, insulation level conforming to UL 94 HF1 class flamability. (viii) A special residential silencer is provided within the enclosure to control exhaust noise. (ix) Specially designed alternators are provided to control sound at air entry to the container and exhaust from the container. (x) Adequate ventilation is provided to meet requirement for combustion and heat removal. If required a blower is used to meet total air requirement and air changes.
(xi) Temperature of enclosure does not exceed beyond 50 degree C of ambient temperature. (xii) The enclosure is provided with “high enclosure temperature” safety device. (xiii) There is provision of emergency shutdown from out side the enclosure. (xiv) There is arrangement for proper illumination inside the canopy. (xv) Noise level is 75 DB (A) at 1 mtr distance. (xvi) Approved by CPCB.
Note :- (i) The quoted rate for DG Set is inclusive of PCC foundation. The foundation for DG Set should be made of PCC 1:2:4 type B1 using 20mm graded stone aggregates below the floor level minimum 300mm and 200 mm above floor platform and of suitable size as per manufacturers recommendations complete all as directed .
-
-
-
(ii) The DG Set shall be suitable to suit the climatic condition of Palampur H.P. so as to give desired output including 10% over load. (iii) The DG Set shall be suitable for auto main failure function.
(iv) AMF panel should of same manufacturer as that of DG Set or as recommended by manufacturer's Vendors and it should be CPRI approved. (V) The DHPP (fuel) required for testing of DG sets is deemed to be included in above quoted rate .(vi) Phase-I test will be carried out by Engineer-in-charge for no load and 100% load for 1 hour each and phase II test will be carried out in presence of SE/EI/IEM for no load, 25%, 50%, 75%, 100% for 11 hours and 110% for 1 hour over load. (vii) Alterantor and engine of DG set should be of same OEM/Manufacturer.
Supply, installing, testing and commissioning LT feeder pillar box, dust and vermin proof, factory fabricated, CPRI approved, double door, indoor cubicle type, wall/platform mounted, suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber duly insulated aluminium bus bars of TPN rating 100 Amps with necessary sleeves IP 45 class protection and made of 2.00mm CRCA MS sheet and 40x40x5mm thick angle iron frame work, powder coated over one coat of red oxide primer outside and two coats of red oxide primer on inside, both side opening type, with aprons for cable entry and locking arrangement internal wiring with PVC insulated, solid copper conductor, FRLS cables not less than 2.5 sqmm and with necessary glands, lugs etc., consisting of the accessories listed hereinafter complete :-
(a) Aluminium bus bar TPN (three phase & neutral) 250 amps rating 01 set made of high conductivity aluminium strip of suitable length with sleeves .(b) MCCB three pole, 415 volts, 50 Hz, 200Amps rating, 25 KA with micro processor release, rotary type handle and connection with proper size of thimbles complete - 01 No (c) Indicating lamps LED type on each outgoing (d) Digital type volt meter 0 to 500 volts with selector switch - 01 No. (e) Ammeter digital type 0-100 Amps with selector switch complete- 01 No. (f) Main ON / DG ON indicator -01 set (g) DG ON / OFF push button - 01 set. (h) Inbuilt battery charger SMPS type with DC control circuit with control fuses and selection mode 'Trickle/ boost' charging of suitable capacity. (j) Automatic change over switch four pole 250 Amp rating-01 No
-
-
-
(j) Platform for the panel with PCC type C-1 using 20 mm graded stone aggreate of size 30 cm below ground and 45 cm above ground all around the panel and grouting bolt etc for panel. The platfarm shall be such a way that it is of height 45 cm above the nearest floor level. Note:- (i) All outgoing feeders shall be connected by cable through suitable size gland plate/glands. (ii) The various feeders shall be indicated by 50 mm size letters in white synthetic enamel paint (iii) All control wiring from panel to DG set shall be included in the cost of panel so that the panel in made fully functional. (iv) Panel diagram shall be approved by GE before placing order.
-
-
-
Supply, installation, commissioning and testing of Automatic Intelligent power factor correction (APFC) panel 3 Phase 415 Volt 50 Hz supply system to improve the power factor from 0.8 to 0.99/unity automatically with step wise switching facility with floor mounted outdoor type weather proof dust/vermin proof powder coated cubical panel made out of 2 mm CRCA sheet and angle iron 40mmX40mmX6mm frame, factory made fabricated as modular in duly powder coated, front openable with locking arrangements, neoprene gasket in door of capacity 100 KVAR with 5 steps (50+25+15+2x5) with the following accessories and including PCC foundation, excavation and grounting bolts etc (Make of Panel : Schnieder/ Legrand/ABB/Indo Asian) (Note :- Test certificate will be provided by the contractor) :-
1
-
-
(a) MAIN INCOMER :-
(i) APFC Micro Processor based relay of 5 stage with time delay function for spacing the auto switching OFF/ON facility in case of leading/lagging power factor auto/manual selector switchs - 01 No. (Make - Indo Asian/ L&T)
(ii) MCCB TP 200 Amps 25 KA thermal magnetic based protection release with O/L & S/C release - 01 No. (Make - Indo Asian/ L&T)
(iii) Extended rotory handle - 01 No. (Make - Indo Asian/ L&T)
(iv) Spreader Set - 01 No. (Make - DSINE/ L&T)
(v) RYB Indicators - 02 Set. (Make - ESBEE/TEKNIC)
(vi) CT CL-1.0, 15 VA Resin Cast/Nylon Case of rating 200/5 Amp - -01 No. (Make - AE/MATRIX/NEWTEK)
(vii) MCB SP 10 Amp, 10 KA, C Curve -01 No. (Make - Indo Asian/ L&T)
(viii) CT Shorting Link - 01 No. (Make - Reputed ISI make)
(ix) Neutral Link - 01 No. (Make - Reputed ISI make)
b) 50 KVAR-1 STEP
(i) MCB TP 125 Amp, 25 KA, C Curve -01 No. (Make - Indo Asian/ L&T)
(ii) Spreader Set - 01 No. (Make - DSINE/ L&T)
(iii) Capacitor Duty Contactor for 50 KVAR with ADON BLOCK 1 NO + 1 NC - 01 No. (Make - Indo Asian/ L&T)
(iv) ON/OFF Indication Lamp 220 Volt AC - 02 Nos. (Make - ESBEE/TEKNIC)
(v) Push Button START/STOP - 02 Nos. (Make - ESBEE/TEKNIC)
(vi) Auto/Manual Selector Switch - 01 No. (Make - Salzer)
(vi) MCB SP 6 Amp, 10 KA, C Curve -01 No. (Make - Indo Asian/ L&T)
(vii) MPP Heavy Duty Capacitor for 50 KVAR (25x2) at 440 Volt AC - 02 Nos. (Make-L&T)
-
-
-
(c) 25 KVAR-1 STEP
(i) MCB TP 63 Amp, 10 KA, C Curve -01 No. (Make - Indo Asian/ L&T)
(ii) Capacitor Duty Contactor for 25 KVAR with ADON BLOCK 1 NO + 1 NC - 01 No. (Make - Indo Asian/ L&T)
(iii) ON/OFF Indication Lamp 220 Volt AC - 02 Nos. (Make - ESBEE/TEKNIC)
(iv) Push Button START/STOP - 02 Nos. (Make - ESBEE/TEKNIC)
(v) Auto/Manual Selector Switch - 01 No. (Make - Salzer)
(vi) MCB SP 6 Amp, 10 KA, C Curve -01 No. (Make - Indo Asian/ L&T)
(vii) MPP Heavy Duty Capacitor for 25 KVAR at 440 Volt AC - 01 No. (Make - L&T)
(d) 15 KVAR-1 STEP
(i) MCB TP 50 Amp, 10 KA, C Curve -01 No. (Make - Indo Asian/ L&T)
(ii) Capacitor Duty Contactor for 15 KVAR with ADON BLOCK 1 NO + 1 NC - 01 No. (Make - Indo Asian/ L&T)
(iii) ON/OFF Indication Lamp 220 Volt AC - 02 Nos. (Make - ESBEE/TEKNIC)
(iv) Push Button START/STOP - 02 Nos. (Make - ESBEE/TEKNIC)
(v) Auto/Manual Selector Switch - 01 No. (Make - Salzer)
(vi) MCB SP 6 Amp, 10 KA, C Curve -01 No. (Make - Indo Asian/ L&T)
(vii) MPP Heavy Duty Capacitor for 15 KVAR at 440 Volt AC - 01 No. (Make - L&T)
-
-
-
(e) 5 KVAR-2 STEPS
(i) MCB TP 20 Amp, 10 KA, C Curve -02 No. (Make - Indo Asian/ L&T)
(ii) Capacitor Duty Contactor for 5 KVAR with ADON BLOCK 1 NO + 1 NC - 02 Nos. (Make - Indo Asian/ L&T)
(iii) ON/OFF Indication Lamp 220 Volt AC - 04 Nos. (Make - ESBEE/TEKNIC)
(iv) Push Button START/STOP - 04 Nos. (Make - ESBEE/TEKNIC)
(v) Auto/Manual Selector Switch - 02 Nos. (Make - Salzer)
(vi) MCB SP 6 Amp, 10 KA, C Curve -02 Nos. (Make - Indo Asian/ L&T)
(vii) MPP Heavy Duty Capacitor for 5 KVAR at 440 Volt AC - 02 Nos. (Make - L&T)
(f) Other Accessories
(i) Aluminium bus bar of rating 200 Amp insulated with color coded heat shrinkable sleeves, E91 E Grade. (Size for Phase 25mm x 10mm -01 No, Size for Neutral 25mm x 6mm -01 No & Size for Earthing 20mm x 6mm -01 No)
(ii) MCB DP 6A, 10 KA, C Curve - 01 No. (Make - Indo Asian/ L&T)
(iii) Cooling Fan 6" with filter - 01 No. (Make - EBM)
(iv) PVC Wire, thimbles, ferules, PVC duct, cable ties and other accessories as per requirement at site.
-
-
-
25 mm bore galvanized steel water tubing medium grade with all fittings fixed complete to wall and ceiling or laying in floors including lgging all around with 50mm thick layer of mineral wool;/rock wool density 48Kg/Cum duly covered all around with aluminium sheet of 24 gauge for open pipe, complete all as specified and directed .
100
-
-
Cable jointing kit for 1100 V grade cable for outdoor termination heat shrink, type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 16 sqmm to 50 sqmm, complete all as specified and directed .
18
-
-
Cable jointing kit for 1100 V grade cable for outdoor termination heat shrink, type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70 sqmm to 120 sqmm, complete all as specified and directed .
10
-
-
Cable jointing kit for 1100 V grade cable for outdoor termination heat shrink, type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 150 sqmm to 185 sqmm, complete all as specified and directed .
4
-
-
Telephone socket suitable for connecting telephone set, complete all as specified and directed .
20
-
-
Exhaust fan 450mm sweep, single phase, 1400 RPM, heavy duty with louver shutter and connecting with electrical system, including provision of cable copper flexible, PVC three core 23/0.0076 from ceiling rose to fan and grouting of holding down bolts in and including PCC M-15(nominal mix) blocks complete all as specified.Make:- Bajaj/havells/CG
4
-
-
High pressure valve of 25 mm dia made of brass suitable for fixing with GI ppe to reduce high pressure of water, complete all as specified and directed.
10
-
-
40 mm bore galvanized steel of light grade with all fittings fixed complete to poles, postop latterns fittings etc ,complete all as specified and directed .
200
-
-
Construction of brick masonary valve pit of size 120 x 120 x 120 cm (internal dimensions) built in cement mortar 1:6,Plain cement concrete,M-10 (nominal Mix) type C-2(using 40mm graded crushed stone aggregate) as in foundation filling and including 15mm thick plastering internally with cement mortar 1:5 and flush pointing externally as the work proceeds in same mortar and plain cement concrete,M-15(nominal mix),type B-1,(using 20 mm graded crushed stone aggregates) as in coping 50mm complete including 3.15 mm thick MS sheet cover, handle, locking arrangement including provision of angle iron frame 40x40x6 mm with 15 cm same angle four sides for grouting in PCC for cover and earth work in any type of soil including removal to a distance not exceeding 50 mtr and painting steel surface with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr- in charge.
5
-
-
Construction of brick masonary valve pit of size 90 x 90 x 90 cm (internal dimensions) built in cement mortar 1:6,Plain cement concrete,M-10 (nominal Mix) type C-2(using 40mm graded crushed stone aggregate) as in foundation filling and including 15mm thick plastering internally with cement mortar 1:5 and flush pointing externally as the work proceeds in same mortar and plain cement concrete,M-15(nominal mix),type B-1,(using 20 mm graded crushed stone aggregates) as in coping 50mm complete including 3.15 mm thick MS sheet cover, handle, locking arrangement including provision of angle iron frame 40x40x6 mm with 15 cm same angle four sides for grouting in PCC for cover and earth work in any type of soil including removal to a distance not exceeding 50 mtr and painting steel surface with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr- in charge.
6
-
-
Drilling and taping of DI pipe line 100mm (in position) and taking out branch connection of internal dia 20mm bore including clamps made out of flat iron 50 X 6 mm, nuts, bolts, rubber sheet etc and jointing complete all as spd and directed by engineer in charge
Note:- Excavation and earth work shall be measured and paid seperately)
8
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements