Rural Development Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Rural Development Department - RDD Tender
Opening Date
9 Sep 2019Closing Date
26 Sep 2019Tender Amount
₹ 4,06,15,782Costs
EMD
₹ 4,06,158Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_CERWI_56143_4Tender No
Online- 02-Bld.-2019-20Tender Authority
Rural Development Department ViewPurchaser Address
-Website
http://http://rdodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size hard broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm(6") thick to the required level ramming, watering, curing etc. complete including cost and conveyance royality of all materials and labour with T&P required for the work etc. complete as per direction of the Engineer-in-charge.
775.27
-
4447.97
Brick masonry in cement mortar (1:6) in F & P using Fly ash brick of size 25cm x 12cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties of all materials with all labour, cess and T&P required for the work complete as per specification and direction of the Engineer-in-charge.
325.39
-
4091.41
Brick masonry in cement mortar (1:6) in Superstructure using Fly ash brick of size 25cm x 12cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties of all materials with all labour, cess and T&P required for the work complete as per specification and direction of the Engineer-in-charge.
-
-
-
Ground Floor
605.54
-
4124.74
First Floor
405.27
-
4367.85
Brick masonry in cement mortar (1:4) in Superstructure using Fly ash brick of size 25cm x 12cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties of all materials with all labour, cess and T&P required for the work complete as per specification and direction of the Engineer-in-charge.
-
-
-
Ground Floor
9.97
-
4320.58
First Floor
9.5
-
4563.65
R.C.C. work of Grade-M25 in following works using 20mm size & down graded hard black crusher broken granite stone chips of approved quality from approved quarry in specified proportion including hoisting, lowering, laying and compacting concrete, watering and curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position. complete as per specification and direction of the Engineer-in-charge.
-
-
-
Ground Floor
-
-
-
a) R.C.C Column Base
238.16
-
5267.7
b ) R.C.C Column
94.11
-
10586.41
c) Plinth Band( Grade Beam )
49.34
-
5625.23
d) Lintels
30.16
-
8768.39
e) RCC Chajja
309.78
-
773.65
f) Roof Slab
166.39
-
9125.38
g) Wall Beams
55.66
-
10586.41
h) R.C.C Stair case
5.7
-
10237.59
First Floor
-
-
-
a) Lintels
29.54
-
9575.46
b) RCC Chajja
331.84
-
866.83
c) R.C.C Column
61.26
-
11757.08
d) Wall Beam
53.81
-
11757.08
e) Roof Slab
172.47
-
10003.84
e) R.C.C Stair case
5.7
-
11338.53
12mm (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the joint including watering and curing with cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect.
-
-
-
Ground Floor
5002.19
-
127.52
First Floor
1532.29
-
132.6
16mm (5/8”) thick cement plaster (1:6) finished smooth to inside rough surface of 9”/10” thick brick walls after raking out the joints including watering and curing with cost with cost, conveyance, royalties of all materials with all labour, T&P required for the work etc. complete as per specification and direction of the Engineer-in-charge.
-
-
-
Ground Floor
2578.49
-
181.47
First Floor
2681.31
-
185.96
Cutting, straightening coiled or bent up M.S. Rod or Tor steel of SAIL / Tiscon or equivalent make (grade Fe-415) including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyance of M.S. rod or Tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills. complete as per specification and direction of the Engineer-in-charge.
-
-
-
Ground Floor
631.46
-
5819.15
First Floor
351.14
-
5840.87
20 mm thick grading plaster in C.M.(1:4) over roof slab and cleaning the surface by wire brushing laid to proper slope finished smooth including watering and curing with cost, conveyance of materials labour, T&P required for the work including royalty etc.complete as per direction of the Engineer-in-charge.
-
-
-
First Floor
1407.68
-
201.2
Providing,Fitting & Fixing of Kota Stone Floor Tiles in Floors, steps &Landing slab over 25mm thick cement plaster in Cement Mortar (1:1) including cost of Tiles, Labour, T&P all complete as per specification and direction of the Engineer-in-charge.
-
-
-
Ground Floor
1143.63
-
997.91
First Floor
1024.44
-
1017.4
Supplying, fitting and fixing of Kota tile floor in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials complete as per specification and direction of the Engineer-in-charge.
-
-
-
Ground Floor
137.36
-
1088.35
First Floor
133.59
-
1116.4
Painting two coats with any approved weather seal coat (I.S.I.) paint of approved quality shade and make over a coat of priming with water bound wall cement primer (I.S.I.) to wall surface including acrylic putty with cost, conveyance of all materials and labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-charge.
-
-
-
Ground Floor
5621.75
-
123.15
First Floor
2195.97
-
124.61
Wall painting two coats with Distemper paints including one coat of water bound cement primer of approved shade including cost and conveyance of all materials to site, and all labour charges complete as per direction of Engineer-in-charge.
-
-
-
Ground Floor
2578.49
-
115.51
First Floor
3978.09
-
116.92
Providing fitting, fixing of Aluminium door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion 12mm thick pre-laminated board in bottom portion fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete as per direction of Engineer-in-charge.
-
-
-
Ground Floor
5.12
-
7202.46
First Floor
5.11
-
7202.46
Providing & supplying,Fitting & fixing of M.S. iron door / window grill / collapsible gate of approved design as directed by Engineer-in-charge including cost, conveyance with all labour and T&P required for the work etc. complete as per specification and direction of the Engineer-in-charge.
-
-
-
Ground Floor
9199.95
-
75
First Floor
4618.2
-
75
Painting two coats with any approved synthetic enamel paint of approved quality shade and make over a coat of priming to new wood work / iron work including cost of the primer and paint, sand papering polishing the surface with cost, conveyance of all materials and labour with T&P required for the work etc.complete as per specification and direction of the Engineer-in-charge.
-
-
-
Ground Floor
128.3
-
178.03
First Floor
27.63
-
185.68
Supplying fixing of chequered tile on 25mm thick of cement mortar (1:1) jointed with neat cement slury mixed with pigments to match the shade of tile including rubbing and polishing cost labour and cost of matrials as per approved quality etc complete as per direction of Engineer-in-charge.
-
-
-
Ground Floor
884.6
-
765.6
First Floor
20.03
-
785.08
Providing fitting and fixing of Stainless steel of 304 grade in hand railing using 50 mm dia 2mm thick circular pipe with Balustrade of 32mm x 32 mm x 2mm @ 90 mtr C/C and stainless square pipe bracing of size 32mm x 32 mm x 2mm in 3 rows in stair case as per approved design and specification,buffing,polishing etc including cost conveyacne royalties of all materials and cost of all labour T&P required for the work etc. complete as per direction of the Engineer-in-charge.
-
-
-
Ground Floor
56.65
-
3481.35
First Floor
12.65
-
3481.35
Supplying and laying Reinforcement Cement Concrete Pipes of NP3 (Confirming to relevant I.S. specification) type for Culverts, jointing ends in cement mortar 1:2 including cost and conveyance of all materials, labours,T&P required for the work etc.complete as per the specification and direction of the Engineer-in-charge.
-
-
-
Ground Floor
20
-
778.2
Finishing wall surface of walls with Acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffodling staging charges with cost of all materials, labour, T&P etc. complete as per specification and direction of the Engineer-in-charge.
-
-
-
Ground Floor
2578.49
-
112.45
First Floor
3978.09
-
113.65
Construction of embankment with approved meterial obtained from borrow pits with alll lifts and leads, transporting to site by mechanical means within a lead of 5 kms., spreading, grading to required slope etc. complete as per direction of the Engineer-in-charge.
729
-
129.25
Construction of Un-reinforced,dowel jointed M-30 Grade cement concrete pavement by semi-mechanized method over a prepared sub-base with 43 grade cement @ 400 kg /cum coarse and fine aggregate confirming to IS:383,maximum size of coarse aggregate not exceeding 25 mm,mixed in a batching and mixing plant as per approved mix design,transported to site,laid with a fixed form or slip form paver,spread,compacted and finished in a continous operation etc , curing compound ,finishing to lines and grades as per drawing and as per clause 602 of MoSRT&H Specifications for Road & Bridge works (4th. Revision) (Taking output = 75 Cum)
337.5
-
5686.81
EI
-
-
-
Recessed wiring to light point/Exhaust fan point with 1.5sqmm FR PVC insulatd single core multistand copper conductor of ISI marked with 20mm dia non-metalic PVC flexible conduit with 5Amp , 250V piano type switch ISI marked and ceiling rose ISI Marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5 sq mm FR PVC insulated single core multistrand copper conductor and earth wire including all accessorie and connection as per direction of engineer in charge ( Make of wire = Finolex/L & T/ Anchor/Havels/ V-Guard) (deducting the cost of S/F of 100mmx 100mmx60mm M.S.Box with bakelite cover - 1 no)Switches-Make (Anchor Penta/Cona Wawa/Preeti)
-
-
-
-do-…..Group A ( 1.1.1-1.24.2)
79
-
290.87
-do- .... Group B ( 1.1.2-1.24.2)
83
-
502.76
-do- .... Group C (1.1.3-1.24.2)
132
-
767.38
Recessed wiring to Fan point in
-
-
-
-do- .... Group B ( 1.1.2-1.24.2)
61
-
502.76
-do- .... Group C (1.1.3-1.24.2)
71
-
767.38
Recessed wiring to Call Bell point in
-
-
-
-do- .... Group C (1.1.3-1.24.2)
5
-
767.38
SIFof 16/18 SWG galvanised metal box of following sizes (Nominal size) in recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
-do-180mmx100mmx60mm deep(1.24.5)
12
-
131.49
-do-200mmx150mmx60mm deep(1.24.7)
25
-
165.29
-do-200mmx250mmx75mm deep(1.24.9)
71
-
206.75
S/F of 5 amp swith and 5A.socket out let of ISI marked on existing board (1.25.1 & 1.25.4)
41
-
83.14
S/F of galvanised metal box of 150mm x 75mmx 60mm deep ( Nominal size) in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5pin 5/6 amp. socket out let & 5/6 amp. piano type switch, connection, painting etc as required ( 1.24.3+1.25.3+1.25.4 )
3
-
192.84
S/F of galvanised metal box of 180mm x 100mmx 60mm deep ( Nominal size) in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5pin 15/16 amp. socket out let & 15/16 amp. piano type switch, connection, painting etc as required ( 1.27 )
14
-
263.88
Wiring for circuit I sub main wiring alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS- 694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required ( Make of wire- Finolex/ L & T /Anchor/ Havels/V-guard).
-
-
-
-do-2x1.5sqmm +1x1.5sqmm ( 1.8.1 )
420
-
120.11
-do-2x2.5sqmm +1x1.5sqmm ( 1.8.2 )
650
-
134.06
-do- 2x4sqmm +1x1.5sqmm ( 1.8.3 )
140
-
151.44
-do- 4x6sqmm +2x2.5sqmm.(1.8.10)
220
-
182.53
-do- 4x10sqmm +2x4sqmm.(1.8.11)
15
-
407.19
S/Fof 'B' series SP MCB of 6Amp rating 240Volt "B" series MCB for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP)(2.6.1) (L&T/C&S/HPL /Haels)
40
-
127.56
S/Fof 4pole MCB of 63Amp rating 16KA MCB for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. (L&T 2.7.4
1
-
2219
S/Fof 4pole MCB of 32Amp rating 16KA MCB for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. (L&T 2.7.4
5
-
1568
S/F of following 4 way (4+12 )Double Door TPN and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.5.5.(L&T/C&S)
8
-
2301
S/F of Call bell/ Buzzer ISI marked sutiable for DC/AC single Phase 230 volts complete as required.(1.30) (Anchor/Cona/Preeti)
5
-
116.72
Supply, Instaliatiion,Testing and commissioning of bulkhead fittings including fixing of 5 watt LED(Make: Havels).
2
-
606.13
S/F of batten holder BK angle holder ISI marked including connection etc instead of ceiling rose (1.29-1.28) (Anchor/Cona/Preeti)
160
-
14.68
Earthing with G.I. Earth pipe 3 mtr.long 40mm dia ISI marked including accesssories and providing masonary enclosure and watering pipe with charcoal and salt as required( 3.5)
2
-
2850.24
Supply and laying 8 SWG Copper wire in recess for loop earthing as required ( 3.18)
20
-
47.68
S/F of Fan hook S'type made of 16mm MS rod as per specificationn
132
-
246.1
Supply of armoured Al.cable of size 3.5x35 sqmm of ISI marked(25)
40
-
258.78
Laying of armoured Al.cable . of size 3.5x35sqmm of ISI marked in ground 5.1.2
32
-
115.32
S/M of end termination of LV/Mvcable size3.5x35 sqmm of ISI marked(5.8.21)
2
-
299.8
Supply, Installation,Testing and Commissioning 100A, TPN pannel board made of 16SWG CR sheet of with powder coated with following specification with earth nut & bolt complete with all accessories and connections including cement concrete work.
1
-
39854
INCOMING
-
-
-
a) 100A TPN main switch 1no (Make-L&T/C&S/HPL/Havels)
-
-
-
b)100Amp TPN Copper busbar(25mmx5mmx4mm Cu flat)- 1 set
-
-
-
OUTGOING
-
-
-
a)32Amp DP MCB- 3nos (Make-L&T/C&S/HPL/Havels)
-
-
-
b)Phase indicator with toggle switch - 1 set
-
-
-
c) Ameter, Voltmeter- 1 set
-
-
-
Supply, Installation,Testing and Commissioning 63A, TPN pannel board made of 16SWG CR sheet of with powder coated with following specification with earth nut & bolt complete with all accessories and connections including cement concrete work.
1
-
35462
INCOMING
-
-
-
a)63A TPN main switch 1no (Make-L&T/C&S/HPL/Havels)
-
-
-
b)100Amp TPN Copper busbar(25mmx5mmx4mm Cu flat)- 1 set
-
-
-
OUTGOING
-
-
-
a)32Amp DP Rotary- 3nos (Make-L&T/C&S/HPL/Havels)
-
-
-
b)Phase indicator with toggle switch - 1 set
-
-
-
c) Ameter, Voltmeter- 1 set
-
-
-
Supply, Instaliatiion,Testing and commissioning of 45 Watt LED street light fitting including bulb and necessary connetion (Make: Crompton /Havells/Phillips/HPL/Polycab)
2
-
5684
Supply, Instaliatiion,Testing and commissioning of 60 Watt LED street light fitting including bulb and necessary connetion (MakeCrompton /Havells/Phillips/HPL/Polycab)
6
-
7779
Supply, Installation,Testing and Commissioning of 225mm sweep exhaust fan in the existing opening,including making the hole to suit the size of the above fan making good the damaged complete, connection, etc as required. Make- Usha-Turbo jet DBBLD
26
-
2078.61
S/F of electronic step ceiling fan regulater in existing switch box including connection with 1.5sqmm FR PVC insulated single core multistrand copper conductor earthing the regulator as required.(1.38)
132
-
284.17
Supply & Fixing of 48" A.C. ceiling fan with resistance type regulator includig numbering of reputed mark including all connections Make/Model- Havels-Velocity ,Sprak / /Usha -STRIKER MILLENIUM/Crompton-Jura / Anchor-XL / Orient- Summer pride)
132
-
2401
Supply and fixing of 18 Watt LED tube light fitting (Make: Havells/PAC/HPL/Crompton/Polycab)
97
-
657
Supply and fixing of portico light(.Havels)
1
-
2165.31
p/f of 1.5 sq mm wire in existing pipe for inverter wring.
360
-
43.23
Supply and fixing of 15W LED bulb. (Make: Phillps /Crompton/Polycab/PAC/HPL)
160
-
310
S/F of computer board consisting of 4 nos 5 amp plug and switch and 6A MCB ,indicator complete with wring on (200mm x 250mm x 75mm) deep M.S box with B.K cover (1.249+1.25.2+1.25.4+2.5.1)
13
-
583.73
S/F of 20A SPN MCB industrial socket.(2.12)
1
-
591.44
P.H.
-
-
-
Supplying all materials, labour T&P and fitting & fixing U-PVC ventilating pipes and fittings of the following O.D conforming to ISI No. 4985/2000 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturer’s specification, testing, e.w. in excavation in all kinds of soil and refilling of trenches as per direction of E.I.C.
-
-
-
a) 110 mm dia U-PVC Pipes (4 Kgf/Cm2)
200
-
204.2
b) 110 mm dia U-PVC P’ Trap
18
-
299.7
c) 110 mm dia U-PVC D/J Door
5
-
350.3
d) 110 mm dia U-PVC S/J Door
18
-
296.7
e) 110 mm dia U-PVC Door Bend
10
-
204.7
f) 110 mm dia U-PVC Plain Bend/H.R Bend
26
-
147.3
g) 110 mm dia U-PVC Cowl
22
-
77.3
h) 110 mm dia U-PVC Offset
22
-
180.5
i) 110 mm dia U-PVC Plain Tee
2
-
268
j) 125mm dia C.P grating
32
-
68.3
k) 75 mm dia U-PVC Pipes (4 Kgf/Cm2)
57
-
121.1
l) 75 mm dia U-PVC Plain Bend
18
-
93
m) 75 mm dia U-PVC Door Bend
3
-
122.9
n) 75 mm dia U-PVC Plain Tee
3
-
161.8
o) 110x75 mm dia U-PVC R.S
4
-
116.2
p) 110x75 mm dia U-PVC Non-Trap
4
-
116.2
Supplying all materials, labour T&P and fixing Water closet, (Orissa pattern squating pan) duly embeded in C.C. (1:5:10) using 4cm h.g. metal all complete as per direction of E.I.C.
-
-
-
a) 580mm Orissa pan (Neycer/ Cerra/Parry ware/ Hindware)
4
-
2812.7
Supplying all materials, labour T&P and fixing Wash Down Water Closet(European type W.C. pan) with Integral ‘S’ or ‘P’ trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.C
-
-
-
a) E.W.C. with ‘S’ trap Plain (Neycer/ Cerra/Parry ware/ Hindware)
11
-
2290.3
Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Neycer/ Cerra/Parry ware/ Hindware)
11
-
611.6
Supplying all materials, labour T&P and fixing Wash basins with hole for pillar taps with C.I/M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.
-
-
-
a) 550mm x 400mm WHB with 32mm dia C.P. Waste & 32mm dia PVC Waste Pipe with brass coupling nut.(Neycer/ Cerra/ Parry ware/ Hindware)
8
-
2149.6
Supplying all materials, labour T&P and fixing padestal for wash basin complete recessed at the back for the reception of pipe and fitting etc. all complete as per specification and direction of E.I.C. (Neycer/Parrywear/Cerra/Hindware)
8
-
2041.8
Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipeby means of white lead mixed with chopped hemp etc all complete as per specification and direction of the E.I.C.
-
-
-
a) bowl pattern urinal with all Fittings(Neycer/ Cerra/Parry ware/ Hindware)
12
-
1834.6
b)Half Stall wall urinal with all Fittings(Neycer/ Cerra/Parry ware/ Hindware)
2
-
5259.1
c)Spreader for Half Stall wall urinal (Neycer/ Cerra/Parry ware/ Hindware)
2
-
300
Supplying all materials, labour, T&P and fixing glazed earth ware squatting plate with integral flushing pipe including embedding the plate in 25 mmC.M (1:8) laid over 150 mm C.C (1:4:8) using 40mm h.g metal etc all complete as per specification and direction of the E.I.C.
-
-
-
a) 450x350x100mm Squatting pattern urinal with all Fittings.(Neycer/ Cerra/Parry ware/ Hindware)
13
-
2524.3
Supplying all materials, labour, T&P and providing marble slab in urinal partition wall including cutting grooves in walls and making good the damages including watering curing etc all complete as per specification and direction of the E.I.C.
-
-
-
a) marble slab in urinal partition wall
-
-
-
(13x0.75x1.20)+(10x0.75x0.90) =7.20 sqm
18.45
-
1048.6
Supplying all materials, labour T&P and fixing mirror of superior glass mounted on 6mm thick plywood sheet and fixed to wooden plugs with C.P screws and washers complete as per P.H specification and direction of E.I.C.
-
-
-
a) 600mm x 450mm B.E. Mirror (fixed type)
10
-
686.8
Supplying all materials, labour T&P and fixing standard size C.P. towel rail / ring complete with c.p. brass brackets fixed to wooden plugs with c.p screws as per P.H specification and direction of E.I.C.
-
-
-
a) 25 mm x 600 mm long C.P Towel rail (Hindware/Parywaremake)
8
-
999.3
b) C.P. Towel Ring (St.)
8
-
427.2
c) C.P. Large Handle for Disable person
8
-
3500
Supplying all materials, labour T&P and fixing standard size C.P. soap holder complete with c.p brass brackets fixed to wooden plugs with c.p screws as per P.H specification and direction of E.I.C.
-
-
-
a) C.P.Soap Holder.
50
-
264.2
Supplying all , labour T&P and fitting, fixing of standard size Acrylic shelf with CP brass bracket and guard rails complete fixed to wooden plugs with CP screw as per specification and direction of E.I.C.
-
-
-
a) 450x125mm size Plate Acrylic Shelf
11
-
582.8
Supplying all labour, T&P, materials & fixing wash Laboratory sink with M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.
-
-
-
a) 24" x 18" x 9"mm Stainless Steel sink. With 40mm dia C.P. Waste & 40mm dia PVC Waste Pipe with brass Coupling Nut (Parryware Make )
3
-
9716.9
Supplying all materials, labour T&P and cutting holes through brick/stone masonary walls for taking PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of E.I.C.
-
-
-
a) 250 mm thick wall
18
-
172.5
b) 375 mm thick wall
22
-
219.8
Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C
100.4
-
551.7
Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gel coat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrene(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy weight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
30.66
-
3181.1
Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P , hire charges of drilling machine, labour charges etc. complete
8.82
-
6575.9
Supplying all materials, labour, T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to worksite payment of royalty etc.all complete as per direction of Engineer in charge.
-
-
-
Ground Floor-
31.3
-
406.1
Supplying all materials, labour, T&P and providing c.c(1:4:8) using 4cm h.g metal including water ing ,curing, conveyance of all materials to worksite payment of royalty etc. all complete as per specification and direction of Engineer in charge.
-
-
-
(a)Ground Floor-
9.49
-
3975.1
(b) First Floor
7.39
-
4181.4
Supplying all labour,materials and T&P and fixing of ceramic tiles in floors,treads,landings on 25 mm thick bed of cement mortar(1:1) jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing and polishing etc all complete as per specification and direction of E.I.C
-
-
-
Ground Floor
105.36
-
962
1st.Floor-
87.89
-
981.5
Supplying all labour,materials and T&P and fixing of porecelain glazed tiles in dado skirting on 12 mm thick CP(1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing and polishing etc all complete as per specification and direction of E.I.C.
-
-
-
Ground Floor-
298.67
-
1016.9
1St. Floor-
275.57
-
1045
Supplying all labour,materials and T&P for cement Painting two coats with approved cement paint including conveyance of all material to work site , payment of royality etc all complete as per specification and direction of E.I.C.
163.11
-
30.9
Supplying all materials, labour, T&P and laying 110 mm dia U-PVC Pipe and aligning to requisite gradient inside the trench encasing all round of the pipe with c.c (1:3:6) using 4 CM size h.g. metal and CC(1:3:6) with 4CM size h.g. metal in the bed of the trench including lowering the pipes to the bed of the trench, earth excavation in trenches in stoney earth, refilling the same in layer of 0.3 mtrs with watering and ramming, removing of surplus earth, testing of sewerage line including use of T&P as per PH Specification and direction of E.I.C.
-
-
-
a) 110 mm dia U-PVC Pipe Sewerage line with all round encasing ( IS-4985/2000- 4 Kgf/Cm2)
15
-
1041.1
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC Pipes conforming to ASTM-D-1785/89(sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and direction of E.I.C
-
-
-
a) 15 mm dia C-PVC Pipe(Sch-80)[Internal]
30
-
160.8
b) 20 mm dia C-PVC Pipe(Sch-80)[Internal]
30
-
211.6
c) 25 mm dia C-PVC Pipe(Sch-80)[Internal]
170
-
288
Supplying all materials, labour, T&P and cutting holes through brick/stone masonary works including making good the damages in c.m. (1:4) for taking P.V.C. pipes & fittings etc. all complete as per P.H. specification and direction of E.I.C.a) Ground Floor
18
-
46.1
b) First Floor
17
-
49
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. .a) Ground Floor
55
-
157.7
b) First Floor
50
-
166.9
Supplying all materials, labour, T&P and fitting & fixing brass /C.P. fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H. specification and direction of E.I.C.
-
-
-
a) 15 mm dia C .P S.B. Bib Cock [Jaquar]
13
-
814.9
b) 15 mm dia C .P L.B. Bib Cock [Jaquar]
50
-
1061
c) 15 mm dia C .P Angle Stop Cock [Jaquar]
38
-
706
d) 15 mm dia C .P Pillar Cock with Long Neck Aerator [Jaquar]
8
-
1000.7
e) 15 mm dia C .P Concealed Stop Cock [Jaquar]
25
-
1075.2
f) 15 mm dia C .P Extension Piece
93
-
58.7
g) 15 mm dia C .P Flange
93
-
39.9
h) 15x100mm dia C.P. Shower [Jaquar]
11
-
1169.8
i) 15 mm dia C .P Health Faucet [Jaquar]
10
-
1257.9
j) 15 mm dia C .P. Two Way . Bib Cock [Jaquar]
10
-
938
k) 15 mm dia C .P. Nozzle Spray [Jaquar]
10
-
500
Supplying all materials, labour T&P and fitting & fixing 10 Litres capacity low level cistern with a pair of cast iron of m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipe. 32 mm C.P flush bend 15mm PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C [Neycer/Parrywear/Hindware]
15
-
1536.8
Supplying all materials, labour, T&P and fixing rotational moulded polyethylene cylindrical vertical waterstorage tank confirming to IS 12701- 1996 including cutting hole through the tank and fixing MS tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting the tank and placing the tank to the required position including all complete as per specification and direction of EIC.(including cost of FG Over Head Tank) [Sintex]
-
-
-
2000ltr. Capacity water tank[on roof of 1st Floor]
5
-
16870.9
Supplying all materials, labour, T&P and Construction of masonary stagging with providing 1st class KB. brick work in c.m, (1:6) of 0.46m. height in staging and in circular protection wall to support the tank in roof of ground floor using 25cm x 12cm x 8cm size KB. bricks having crushing strength not less than 75 kg/cm2 12mm thick c.p.(1:4) over brick work, R.C.C. Slab of size 1.64mtr xl.64mtr x0.l0mtr thick, R.C.C. beam of size 0.25m X 0.30m and 2.61m average length in c.c.(1:1.5:3) using 12mm size h.g. chips including centering and shuttering, watering, curing conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C
-
-
-
2000ltr. Capacity water tank[on roof of 1st Floor]
5
-
15609
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC Pipes conforming to ASTM-D-1785/89(sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and direction of E.I.C
-
-
-
a) 25 mm dia C-PVC Pipe[External]
100
-
267.5
b) 32 mm dia C-PVC Pipe[External]
200
-
390.3
c) 40 mm dia C-PVC Pipe[External]
20
-
519.7
Supplying all materials, labour, T&P and fitting & fixing brass /C.P. fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H. specification and direction of E.I.C.
-
-
-
a) 25mm dia Brass FWV (Surya/Shakti )
2
-
1054.2
b) 32mm dia Brass FWV (Surya/Shakti )
7
-
1542.8
c) 25mm dia PVC FWV [Good Quality]
4
-
336.5
d) 32mm dia PVC FWV [Good Quality]
2
-
560.4
d) 40mm dia Brass FWV (Surya/Shakti )
1
-
1964.2
Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of EIC.
-
-
-
a)Initial lift up to 1.50m
55.67
-
185.62
(b).From 1.50m to 3.00m depth
50.92
-
199.25
Supplying all materials, labour, T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to worksite payment of royalty etc .all complete as per direction of Engineer in charge.
5.57
-
406.1
Supplying all materials, labour, T&P and providing c.c(1:3:6) using 4cm h.g metal including water ing ,cu ring, conveyance of all materials to worksite payment of royalty etc. all complete as per specification and direction of Engineer in charge.
5.27
-
4303.3
Supplying all materials, labour, T&P and providing C.C(1:1.5:3) using 12mm h.g chips including watering. curing, conveyance of all materials to worksite payment of royalty etc. all complete as per specification and direction of E.I.C.
5.14
-
6171.1
Supplying all materials, labour. T&P and providing brick work with Fly ash Bricks having c. s not less than 75kg/cm2 with dimensional tolerance +/-8% including watering, curing, conveyance of all materials to worksite, payment of royalty etc. all complete as per specification and direction of Engineer in charge.
-
-
-
In F&P in c.m(1:4)
39.26
-
4547.4
In F&P in c.m(1:4) Superstructure
3.97
-
4580.7
Supplying all materials,1abour,T&P and providing rigid & smooth centering & shuttering for R.C.C. works including false work and dismantling them after casting including conveyance of all material, to worksite, payment of royalty etc.all complete as per specification and direction of E.I.C.
24.28
-
414.5
Supplying all materials, labour,T&P and providing M.S reinforcement for R.C.C works including cutting ,bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty etc.all complete as per specification and direction of E.I.C.
2.77
-
5017.8
Supplying all materials, labour,T&P and providing RCC (1:1.5:3) using 12mm h.g chips for R.C.C works including oisting,laying,watering,curing,conveyance of all materials to worksite, payment of royalty etc.all complete as per specification and direction of E.l,C.
-
-
-
(a) R.c.c (1:1.5:3)
3.46
-
6171.1
Supplying all materials, labour,T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to worksite, payment of royalty etc.all complete as per pecification and direction of E.I.C.
-
-
-
12 mm thick C.P in C:M (1:3)
81.95
-
147.9
Supplying all materials, labour,T&P and providing cement punning including watering, curing. conveyance of all materials to worksite, payment of royalty etc.all complete as per specification ion and direction of Engineer in charge.
81.95
-
29.2
Supplying all labour, materials T&P and fixing of 2" R.C.C.Baffle wall precast with C.C.(1;1.5:3) using 12mm b.h.g. chips and fitted to septic tank as per P.M. Specification and direction of E.I.C
2.95
-
642.3
Supplying all materials, labour, T&P and making M.S. Step Iron in 20mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C.
20
-
117
Supply all materials ,labour,T&P providing fitting and fixing PVC. Tee in wall including filling the necessary with cement concrete (1:2:4) with 12mm size h.g. chips all complete including watering curring,conveyance of all "materials to work site .payment of royality etc. all complete as per specification and direction of E.I.C.
-
-
-
16OmmXI 60mm X160mm PVC Tee
6
-
559.3
Supplying all materials labour T& P and providing 500 x 500 x 100mm thick RCC precast M.H cover in C.C (1:1.5:3) using 12mm h.g. chips and placing the cover on the MH/S tank & finishing smooth all complete as per specification and direction of E.I.C
5
-
229.1
Supplying all materials, labour, T&P and providing cement flush pointing to brick masonary (1:3) including watering, curing, conveyance of all mat erials to worksite, payment of royalty etc. all complete as per specification and direction of E.I.C.
96.59
-
130.7
Filling in F&P with excavated materials, including watering and ramming as per direction of Engineer in charge.
11.31
-
104.15
Supplying all materials, labour T&P and fitting & fixing U-PVC ventilating pipes and fittings of the following O.D conforming to ISI No. 4985/2000 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturer’s specification, testing, e.w. in excavation in all kinds of soil and refilling of trenches as per direction of E.I.C.
-
-
-
a) 110 mm dia U-PVC Pipes (4 Kgf/Cm2)
10
-
204.2
b) 110 mm dia U-PVC Cowl
3
-
77.3
c) 110 mm dia U-PVC Door Bend
5
-
204.7
d) 110 mm dia U-PVC Plain Bend
5
-
147
e) 75 mm dia U-PVC Pipes (4 Kgf/Cm2)
5
-
121.1
f) 75 mm dia U-PVC Plain Bend
5
-
93
g) 75 mm dia U-PVC Door Bend
5
-
122.9
Supplying all materials, labour T&P and costructing gully trap chamber of the following inside size with 8cm thick R.C.C. precast cover slab in c.c. (1:1 1.5:3) using 12 mm size h.g. chips foundation concrete (1:3:6) using 40 mm size h.g. metal on bed and arround trap Fly ash. brick work in c.m. (1:6) in F&P and inside 12mm thick c.p (1:3) finished with a floating coat of neat cement including fixing 100mm size H.C.I gully trap and grating etc. all complete as per approved drawing, specification and direction of E.I.C.
-
-
-
a) Inside size 250mm x 250mm gully trap Chamber
10
-
1626.5
Supplying all materials,labour,T&P and costructing Inspection chamber of the following sizes with c.c(1:3:6) using 40mm size h.g metal on ed,1st class Fly ash.brick work in c.m(1:6),moulding and shaping the channel inside and benching with c.c(1:1.5:3) using 12mm size hg chips, 12mm thick c.p(1:3) with punning to inside,cement flush pointing (1:3) to outside,R.C.C cover slab in c.c(1:1.5:3) using 12mm size h.g chips with R.C.C m.h cover.e.w in excavation in all kinds of soil and refilling the cavity arround the chamber including watering, curing, conveyance of all materials to site payment of royalty etc.all complete as per approved specification and direction of the E.I.C.
-
-
-
Inside size 760mmx760mmx460mm
8
-
7588.5
Addle.depth
5
-
915.7
Supplying all materials, labour T&P and constructing man hole chamber of the following sizes with c.c. ( 1:3:6) using 40 mm size h.g. metal on bed Ist class Fly ash. brick work in c.m. (1:6) moulding and shaping the channel inside and benching with c.c (1:11/2:3) using 12mm size h.g. chips, 12 mm thick c.p (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C. cover slab in c.c (1:11/23) using 12 mm size h.g. chips with R.C.C m.h. cover, e.w in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty etc. all complete as per approved specification and direction of the E.I.C.
-
-
-
a) Inside size 910mm x 910 mm x 750 mm
5
-
12834.25
b) Inside size 910mm x 910 mm x 910 mm
3
-
14065.6
Supplying all materials,labour,T&P and costructing soakway pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and 1 st class Fly ash Brickwork in c.m(1:6) for the remaining height attop,12mmthickc.p(1:4) inside and outside over masonary brickwork, gravel packing in the rear of well steining.R.C.C cover slab in c.c(1:1.5:3) using 12mm size h.g chips fitted with iron lifting handles including e.w in open well excavation in all kinds of soil and refilling the cavity arround the pit & painting the iron works.watering.curing,conveyance of all materials to worksite, payment of royalty etc.all complete as per approved drawing,specifcation and direction of E.I.C.
-
-
-
1.20m dia.x 2.00m deep
5
-
14821.7
1.40m dia.x 2.00m deep
7
-
17349.8
Supplying all materials, labour, T&P and laying 110/160 mm dia U-PVC Pipe and aligning to requisite gradient inside the trench encasing all round of the pipe with c.c (1:3:6) using 4 CM size h.g. metal and CC(1:3:6) with 4CM size h.g. metal in the bed of the trench including lowering the pipes to the bed of the trench, earth excavation in trenches in all kinds of soil, refilling the same in layer of 0.3 mtrs with watering and ramming, removing of surplus earth, testing of sewerage line including use of T&P as per PH Specification and direction of E.I.C.
-
-
-
a) 110 mm dia U-PVC Pipe Sewerage line with all round encasing ( IS-4985/2000- 4 Kgf/Cm2)
30
-
1041.1
b) 160 mm dia U-PVC Pipe Sewerage line with all round encasing ( IS-4985/2000- 4 Kgf/Cm2)
30
-
1588.4
Sinking of 125x100mm dia Tube Well through Hand Boring Method [ 2 Nos 160.00 mtr each] [Saline Sealing]
-
-
-
Supplying all materials, labour, T&P and setting up boring equipments including irrection of suitable stagging for installation of the required size of tube-well. Dismantling & removing the same after completion of the work including transportation of boring equipments clearing & leveling the site, excavation of mud pit channels etc., leveling of site all complete as per direction of E.I.C(Labour) (1.00 x 2)
2
-
6353.4
Supplying all labour, T&P & transportation of boring pipes, top casing, grouping pipes, PVC pipes and fitting, PVC well screens, cement, betonite etc. including loading and unloading etc. complete as per direction of the E.I.C.(Labour) (1.00 x 2)
2
-
1770.6
Supplying all labour, T&P and drilling pilot bore not less than 102mm dia without casing pipes in all kinds of soil and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments extra sockets etc.and withdrawing the boring pipes washing & keeping the bore clear for logging if required all complete as per the direction of EIC
-
-
-
Pilot bore 100mm dia (00 mtr. to 360 mtr.) (160.00 x 2)
320
-
470.41
Supplying all required laboyur for logging the bore through departmental team (till logging team arrives at the site, the contractor is to keep the bore intact by cirulating mud through the mud circulating system) and when the logging team arrives at the site, the contractor will withdraw the boring pipe with cutter etc. and keep the bore suitable for logging and supply required labour to carry out the logging operation.(1.00 x 2)
2
-
3693.57
Supplying all labour, T&P & reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc. all complete as per direction of E.I.C.
-
-
-
100 mm ot 150 mm dia( 00 mtr to 360 mtr) [160.00 x 2]
320
-
61.56
150 mm to 200 mm dia( 00 mtr to 360 mtr) [160.00 x 2]
320
-
96.29
200 mm to 250 mm dia( 00 mtr to 360 mtr) [37.00 x 2]
74
-
106.63
Supplying all labour, Tools and plant and lowering the 300mm dia top casing pipe into position and removing the same after use as per the direction of Engineer-in-charge.(1.00 x 2)
2
-
757.9
Supplying all labour, T&P and jointing materials and lowering the PVC casing pipes fitting and well screens in position including fitting of centralizer cutter plugs and washing the bore as per the direction of E.I.C.(Including cost of Materials)
-
-
-
125 mm dia PVC Pipe (Schedule-80) [35.00 x 2]
70
-
651.82
100 mm dia PVC Pipe (Schedule-80) [115.00 x 2]
230
-
470.26
100 mm dia PVC strainer [10.00 x 2]
20
-
619.31
125x100 mm dia PVC R/S [1.00 x 2]
2
-
747.5
100 mm dia C.I. Plug Cutter [1.00 x 2]
2
-
342
Lowering of 125mm/100mm dia PVC Pipe [160.00 x 2]
320
-
20.39
Supplying all labour, T &P and grouting with cement betonite slurry for saline sealing in the bore over the Rubber Packer etc. all complete as per the direction of Engineer-in-charge ( Exxcluding cost of Cement .) (1.00 x 2)
2
-
2549.49
Cost of Cement (15 Bags) for Saline Sealing including transportation- (7.50 Qntl x 2)
15
-
575.8
Supplying all labour, T&P materials and providing sanitary sealing by cement slurry grouting around the uppermost 3.00 mtrs. of 125 mm dia PVC casing pipe . including cost of cement all complete as per direction of E.I.C (including cost of 2 bags of Cement)
2
-
1184.12
Supplying all labour, T&P, materials & Providing Annabond-666 at the thread of the pipe to avoid saline leakage as per direction of Engineer-in-Charge. (6.00 x 2)
12
-
500
Cleaning the developing the tube well using compressor continuously to get clear and adequate discharge from the tube well including the supply and use of all necessary equipment and labour as per direction of E.I.C(Labour Charges) [6.00 hour x 2]
12
-
1464.65
Supplying all labour, T&P and materials for fitting and fixing of India Mark-II Deep well Hand Pump with cast Iron cylinder, 12mm/16mm dia B.S. Connecting rod, 32mm dia G.I.Pipe of required lengths with supply of extra socket of approved make all complete including carriage, coveyance as per direction of Engineer-in-charge.
1
-
15515.87
Supplying of all material labour T&P and for construction of tube well platform as per specification and direction of EIC.
1
-
5066
Supplying of all material labour T&P and for construction of Drain for tube well platform as per specification and direction of EIC.
3
-
535.5
Earth work in Stoney earth in excavation of foundation trenches within 50 m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30 in depth and as per direction of E.I.C.
-
-
-
Initial lift up to 1.50m
0.3
-
185.62
Supplying all materials, labour T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to worksite payment of royalty etc. all complete as per direction of E.I.C.
0.15
-
406.1
Supplying all materials, labour T&P and providing c.c (1:3:6) using 4cm h.g. metal including watering, curing, coveyance of all materials to worksite payment of royalty etc. all complete as per specification and direction of E.I.C.
0.1
-
4303.3
Supplying all materials, labour, T&P and providing brick work with K.B.. bricks 25cmx12cmx8cm size having c.s. not less than 75kg/cm2 with dimensional tolerance ± 8% in c.m. (1:6) including watering,curing conveyance of all materials to worksite, payment of royalty etc. all complete as per specification and direction of E.I.C.
-
-
-
a) In Foundation and Plinth(1:6)
0.62
-
4358.5
Supplying all materials, labour, T &P and providing C.C (1:1.5:3) using 12mm h.g. chips for R.C.C. works including hoisting, laying, watering, curing, conveyance of all materials to worksite, curing, conveyance of all materials to worksite, payment of royalty etc, all complete as per specification and direction of E.I.C.
0.06
-
6171.1
Supplying all materials, labour, T&P and providing M.S. reinforcement for R.C.C. works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty etc. all complete as per specification and direction of E.I.C.
0.05
-
5017.8
Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to worksite, payment of royalty etc. all complete as per specification and direction of E.I.C.
-
-
-
12mm thick C.P with C.M. (1:6)
5.59
-
127.4
Supplying all labour T&P, materials and finishing wall with water proofing cement paint of approve shade on new work two coats to give an even shade including cost of brushes and putty with cost of paint and direction of E.I.C.
3.42
-
30.9
Supplying all materials,labour,T&P and costructing soakway pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and 1 st class K.B brickwork in c.m(1:6) for the remaining height attop,12mmthickc.p(1:4) inside and outside over masonary brickwork, gravel packing in the rear of well steining.R.C.C cover slab in c.c(1:1.5:3) using 12mm size h.g chips fitted with iron lifting handles including e.w in open well excavation in all kinds of soil and refilling the cavity arround the pit & painting the iron works.watering.curing,conveyance of all materials to worksite, payment of royalty etc.all complete as per approved drawing,specifcation and direction of E.I.C.
-
-
-
1.00m dia.x 2.00m deep
1
-
11862.8
Supplying of ISI Mark 1.00 HP Single Phase Vertical Submersible Pump Set with Discharge of 220 liter & above /hour at a head of 55-90 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and etc. all complete as per direction of Engineer-in-charage.
2
-
15849.15
Supplying all labour, T&P and fitting and fixing of 1.00 HP Single phase vertical Submersible Pump Set with commissioning and testing etc. all complete as per direction of Engineer-in-charge.
2
-
1316.96
Supplying and fitting and fixing of ISI Mark DOL Starter of reputed make like BCH or Equivalent for 1.00 HP Single Phase Submersible Pump including all cost, conveyance and etc. all complete as per direction of Engineer-in-charge.
2
-
2809.32
Supplying and fitting and fixing of three core flat cable (2.5mm2) of ISI Make of reputed company line BCH/Finolex or Equivalent and connecting the pump and starter including all cost, conveyance and etc. all complete as per direction of Engineer-in-charge.[80.00 x 2]
160
-
114
Supplying and fitting and fixing of three core flat cable (2.5mm2) of ISI Make of reputed company line BCH/Finolex or Equivalent and connecting the pump and starter including all cost, conveyance and etc. all complete as per direction of Engineer-in-charge.[80.00 x 2]
2
-
1660
Providing Electricity to the Pump along with supply of all required accessories. etc. all complete as per direction of Engineer-in-charge.
2
-
1000
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC Pipes conforming to ASTM-D-1785/89(sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and direction of E.I.C
-
-
-
a) 32mm dia HDPE Pipe [Inside TW] (35.00 x 2)
70
-
76
b) 32mm dia HDPE Pipe [External including E/W] (30.00 x 2)
60
-
114.64
c) 32 mm dia PVC (ASTM) Pipe[External]
60
-
113.7
d) 20mm dia HDPE Pipe [ including Earth work] (30.00 x 2)
60
-
61.66
Sypplying all labour T &P , Materials and Installation of 5.00KV Auto Stabilizer of ISI Mark at a rating of 90 Volt to 220 Volt including supply of all required accessories and testing the stabilizer including carriage, loading and unloading along with electrical connection etc all Complete as per direction of Engineer-in-charge. [1.00 x 2]
2
-
9375
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements