Military Engineer Services Tender

M&L for forming construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

S & F in replacement 150mm dia MS round steel pole with 3.2m extn having 10' standard height for standard basket ball court above ground level, alongwith frame work & rim height 10'(305cm), rim diameter hoops 18"(46cm), 18 mm thick Malaysian acrylic boards of size 183cm x 107cm normal rings( The inner rectangle on the backboard is 24 inches (61cm) wide by 18 inches(46cm) tall, and helps as shooter determine the proper aim and banking for either a layup or distance shot) and net complete etc all as specified and directed by EIC.

S & F Mild Steel frame work as in frame for covering and like including necessary cutting into shape required complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plain exc 6m mean radius built in cement mortar 1:6 etc all complete.

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4, including finishing even and smooth without using extra cement, complete all as specified.

M&L for preparation of newly plastered surfaces of wall and applying two coats of weather proof of acrylic emulsion paint exterior grade over a coat of primer etc complete all as specified and as directed by Engr-in-Charge.

M&L for form work to soffit of slab flat not exceeding 200mm thick horizontal or sloping rough finished surface complete all as specified and directed.

M&L for RCC (Nominal mix type B-1(20 mm graded stone aggregate) 1:2:4 as in Slabs supported on walls, beams and columns in floors roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S&F TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F Granite (of any type) 18 -20 mm thickwork (table rubbed and polished) in steps, jambs, pillars, window-cills,sitting benches forms and like in cement mortar (1:4) including pointing in white cement (1:2 )using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment fixed over and including 50mm thick sand coushiong etc complete all as specified and directed.

M&L for plain cement concrete 1:2:4 (using 12.5mm graded aggregate) as in coping ,benching, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Supplying and fixing of 8 Layer acrylic synthetic flooring for basket ball court, badminton court and volley ball court (3 to 4mm thick) over Plain cement concrete complete all as specified and directed with following stages given below:- PATCH:- 100% Acrylic based emulsion to repair cracks of concrete pavement It should be carried out after 30 days from the date of placement of concrete. PRIMER – 100% Acrylic Unic Floor based emulsion to improve bond of acrylic court system to the concrete surface. RESURFACER:- 02 layer of Acrylic Resurfacer 367-30 for filling and smoothing or concrete surfaces in preparation for Acrylic ITF Approved and fills the surface chips, voids and conceals repairs while providing a smooth surface for colour coating. CUSHION COAT:- 02 layer of Acrylic Floor cushion for concrete surfaces in preparation for Acrylic ITF approved system. ULTRA CUSHION COAT:- 02 Layers of Acrylic Floor cushion for concrete surfaces in preparation for Acrylic ITF approved system. PRECOAT:- 2 layers of Acrylic based textured topcoat. Ideal for color coating Badminton, Volley Ball and Basketball courts and other sport pavement surfaces complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth of any and applying two coat of synthetic enamel paint of approved shade over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

Excavation over areas , not exceeding 1.5 M deep and getting out in any type of soil etc all all complete.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick with soils etc all complete.

Removing Excavated soils exceeding 250 M but not exceeding 500m and depositing where directed.

M & L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete etc all complete.

M & L for plain Cement concrete in foundation Type C2 1:3:6 using 40 mm graded stone aggregate as in foundations filling and mass concret complete all as specified and as directed.

Materials and Labour for 40 mm thick plain cement concrete (1:2:4) type B1 using 20 mm graded aggregate as in sub base complete all as specified and directed.

M & L for Granite 18 to 20 mm thick (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 10 mm thick in cement mortar (1:3) and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

Rounding for edges of stone slab one edge, such as in steps cooking platform and other similar work.

S&F chequered cement concrete tiles 30cmx30cmx 25mm thick, set jointed and pointed in neat cement slurry in floor with grey cement and pigment fixed over and including 15mm thick screed bed in cm 1:4 etc all as specified and as directed.

M&L for pre-cast RCC 1 : 2 : 4, type B-1 using 20 mm graded stone aggregate in cover slabs for man holes etc, set in cement mortar I : 6 complete all as specified and as directed.

Dismantling unserviceable Steel Tubular Poles/struts of any description and any size including demolition of Cement Concrete (as/if required) and made good disturbed Ground, complete all as specified and as directed. NOTE: Unserviceable Poles will be dismantled at Ground Level and disturbed ground will made good as directed for which Earthwork, demolition of Cement Concrete, etc. will not be measured and paid separately.

Supply & Erecting Steel Tubular Swaged Pole Type 410-SP-31 (9.0 METRE long) including Cast Iron Base Plate, Finial Taper Plug, Cap, Mild Steel Bolts, Nuts, Screws including applying two coats of Black Bituminous Paint Internally and Externally from bottom End of Pole upto PCC Coping and applying with two coats of Aluminium Painting over a coat of Alumi-nium Primer (Externally from Top of Coping) including writing MES Pole No. with synthetic Enamel Paint (First Grade/quality), complete all as specified and as directed. NOTE: Earthwork, Cement Concrete, etc. will be measured and paid under approprite Items.

Supply and fix Prestressed concrete poles of 9 meter long having 102 mm x 172 mm at top and 102 mm x 289 mm at bottom including .applying with two coats of Cement based paint over the external surface of the pole and writing MES Pole No. with synthetic Enamel Paint (First Grade/quality)complete all as specified and directed. NOTE: Earthwork, Cement Concrete, etc. will be measured and paid under approprite Items.

M&L for Cross-arms, Bracings, Supports, Clamps and Back Plates fabricated from Structural Steel Sections including Nuts, Bolts, Washer, welding, bending cold or hot, drilling holes for Bolts, in any shape or size as indicated/ directed and inclusive of two coat of Aluminium Paint over a Coat primer, complete all as specified and as directed.

Supply and fix in replacement LED Flood light 175 W .input voltage 220-240 V, operating Voltage 140-270 V AC, THD 10 % , inbuilt surge protection of 4 KV, IK 08, 21000 luman with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket corrosion resistant including thermal management in multiple optics complete with IP 66, LED Life time 50000 Hr, lens and Optical Cover of PolyCarbonate protection including all accessories(flexible copper cable 1.5 sqmm 3 core with PVC conduit of suitable length from loop box to light as required and necessary clamp to fix the PVC conduit on pole Complete all as specified and as directed Cat Part No BVP483 LED210 CW SWB PSU GR of Make Phillips or its equivalent in Wipro and Crompton.

Supply and fixing in replacement LED street light fitting 90 Watt , input voltage 220-240 V, operating Voltage 140-270 V AC, THD 10 % , inbuilt surge protection of 4 KV, IK 07 with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket corrosion resistant including thermal management in multiple optics complete with IP 66, LED Life time 50000 Hr, lens and Optical Cover of Glass protection complete ncluding all accessories(flexible copper cable 1.5 sqmm 3 core with PVC conduit of suitable length from loop box to light as required and necessary clamp to fix the PVC conduit on pole Complete all as specified and as directed.Cat Part No BRP340 LED150CWHOSLC S2 PSU GR of Make Phillips or its equivalent in Wipro and Crompton.

Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core

S & F in replacement street light terminal boxes made out with SMC matterial shock and dust proof of inside size 295 X 195 X 100 mm as per IS and including 50 Amps TPN busbar fixed on insulator 01 No 10 Amps SP MCB earth termination with nuts and bolts and including 02 nos of flat iron clamps of size 25 x 6 mm, nuts, bolts and washers including two coat of aluminium paint over a coat of primer on exposed steel surface and connecting all incoming and outgoing wires with AL lugs of appropiate size. Complete all as specified and as directed Make : Hensal/Rettal/Sintex

Material & labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron strip 25x4 mm as earthing lead (upto the test point ) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm dia GI pipe connected upto test point and GI pipe light grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 5 of SSR 1991(Part-I) complete all as specified and as directed by Engineer-in-charge.

Excavation in trenches not exceeding 1.5 M in wide and not exc. 1.5 M in depth for taking out or laying of under ground cable in any type of soil complete all as specified and as directed.

Removing surplus soil to a distance not exceeding 50 M and deposited at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.

Supply and fixing HDPE double wall Corrugated Duct Pipe of Size 40 mm OD and 32 mm ID for Cable Protection laid in trench. Complete all as specifed and as directed by Engineer in charge

M&L for cutting the existing road / PCC / drain for taking out / laying of underground cable including necessary earthwork excavation and making good to match with the exisitng surface complete all as specified and with PCC 1:3:6 type C1 by (using 20 mm graded stone aggregate) 100mm thick complete all as specified and directed.

Materials and labour for plain cement concetre (1:2:4) type B1 (using 20mm graded aggregate) as in copings and footings for poles etc including necessary formwork complete all as specified and directed.

Materials and labour for plain cement concetre (1:4:8) type D2 (using 40mm graded aggregate)as in foundations , filling and mass concrete complete all as specified and directed.

Supply,installing, testing and commissioning in replacement of LT Outdoor type panel board of suitable size, pedestal mounted, CPRI approved totally enclosed, dust and vermin proof, front side openable, type IP 54 protection made of CRCA sheet 3.15 mm thick of size as per IS and having proper locking arrangement in front and back side door suitable for 440 volts, 50 Hz, 3 phase 4 wire system including cable glands of suitable size for incoming and outgoing cables and comprising with and including following accessories and mounted on PCC Plat form min 50 cm from ground level and grouted in PCC 1:3:6, 100 mm thick, 0.25 m all round the panel board.complete with the following items housed in :- BUSBAR :- 200 Amps rated Alumunium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round) insulators of suitable size and good insulation resistance (Busbar to MCCB shall be connected through suitable size of aluminium rigid / flexible busbar). (a) Incomming :- (Adjustable Type) (i) MCCB 125 Amps, 4 pole, 25 KA, 415 V - 01 Nos Type DU250C Cat Part No CM90634OOMO of L & T or its equivalent in Schneider/Legrand (iii) LED Multi function with meters. - 01 Nos (iv) LED indicating lamps-1 set of 3 (b) Outgoing :- (1) MCB FP, 40 Amps, C Curve , 10 KA, 440V - 04 Nos (Adjustable Type) (2) MCCB 63 Amps, 4 pole, 18 KA, 440V - 02 Nos (Adjustable Type) Type DU100D cat part no CM90518OOJO of L & T or its equivalent in Schneider/Legrand