Rural Development Department Tender

Providing and laying in situ/Ready Mix cement concrete M-20of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying /pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I.quality Artificial Sand SSR PNO 182/25.11 BDA 1

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structuralsteel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I.quality Artificial Sand SSR PNO 185/25.31 BDA 1

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR PNO 188/25.50 BDF 1

Providing and casting in situ cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd.F.8 Page No. 302 and B.7,SSR.PNO.190/25.70

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR PNO 193 /26.17

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I.quality Artificial Sand SSR PNO 193 /26.05

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations,slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete SSR PNO 199 / 26.33

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water, striking joints on unexposed faces, raking out joints on exposed faces and watering Complete. Spec. No.: Bd.G. 1 Page No. 313 SSR.PNO.212/27.01

Filling in plinth and floors with approved excavated material in15cm. to 20cm. layers including watering and compacting etc. complete SSR PNO 154/21.36 BDA 10

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.SSR PNO 154/21.37 BDA 10

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in Superstruture of inner walls/ in plinth external walls including bailing out water, striking joints on unexposed faces, raking out joints on exposed faces and watering Complete. Spec. No.: Bd.G. 1 Page No. 313 SSR.PNO.212/27.05

Providing internal cement plaster 12mm thick in single coat incement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc.complete SSR PNo224 Ino 32.03

Providing neeru finish to plastered surfaces in all positionsincluding scaffolding and curing etc. completeSSR PNo225 Ino 32.15

Providing internal cement plaster 20mm thick in two coats incement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.completeSSR PNo224 Ino 32.06

Providing and fixing steel windows of verious as per detailed drawings without ventilator and steel frame of angle 40x40x5 mm and shutter frame of 25x25x5 mm and shutter with MS sheet of 18 guage of approved quality with hold fast neceaasry fixing and fixing and fastening and fixtures,necessary welding with oil painting two coats including primer coate complete as per detailed drawings and as directed complete. (Including M S guard bars of 12 mm at 10 cm c/c and MS flat of 40x6 mm)

Providing and fixing double leaf steel door without ventilator including shutter of MS frame of angle 50x50x6 mm and shutter frame of MS angle of 30x30x6 mm and shutter sheet of 10 guage of approved quality with hold fast neceaasry fixing and fastening and fixtures,necessary welding with oil painting three coats including primer coate complete as per detailed drawings and as directed complete.

Providing and applying white-wash in TWO coat on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing & brooming down complete. Spec. No.: Bd.P.1 Page No. 411 DSR PNO/INO 243/36.03

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc complete.SSR Pno.244/36.12

Providing and applying two coats of water proof cement painof approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.SSR 17-18 Pno 242/Ino 35.13

Providing and laying Polished Tandur Stone flooring 25mm to30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete SSR 17-18 Pno228/Ino 33.05

Providing and laying machine cut machine polished shahabadStone slabs 20 to 25mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.SSR 17-18 Pno230/Ino 33.17

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.SSR Pno.281/40.01

Providing and fixing Road junction/Information sign board of size 0.90 m x 0.60 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 25 x 25 x 3 mm including painting with one coat ofzinc cromate stoving primer and two coats each of green/ white back ground and back side gray tove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / umeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50 x 50 x 5 mm of 3.65m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes,conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Spec. No.: MORTH 801 I.R.C.: 67-1977 DSR PNO/INO 200/41 / 23 MORTH 801

Fine AggregateSand)-Fineness Modulus ( Sieve Analysis ), Silt & Clay Content

Course aggregate--Sieve analysis

Bricks--Water Absorption (Set of 5 Bricks), Compressive Strength(Set of 5 Bricks), Efflorescence (Set of 5 Bricks).

Concrete M20--Compressive strength of C.C. cube (Set of 3 cubes).

Add Royality Amt

Add GST Charges