Directorate Of Town And Country Planning Tender

Centering and shuttering including strutting, propping etc. and removal of form for : S.O.R.-Item-5.9.1-Page- 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete up to plinth level.

Centering and shuttering including strutting, propping etc. and removal of form for : S.O.R.-Item-5.9.6-Page- 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts.

Centering and shuttering including strutting, propping etc. and removal of form for : S.O.R.-Item-5.9.5-Page- 5.9.5 Lintels, beams, girders, bressumers and cantilevers.

Providing and laying in position specified grade of reinforced cement concrete (with 20 mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : S.O.R.-Item-5.1.1-Page- 5.1.1 M 20 – Grade Concrete

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars posts and struts suspended floor roof slab, beams, etc.up to floor two level excluding cost of centering,shuttering, finishing and reinforcement : S.O.R.-Item-5.2.1-Page- 5.2.1 M 20 Nominal mix (with 20mm nominal size graded stone aggregate)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire up to floor two level including all wastage and lappage/overlaps(overlaps shall be provided as per requirement of IS 13920, IS 456 & SP 34) etc. complete.(Note : Spacer bars (chairs) shall be paid separately as shown in the drawings and as per direction of engineer-in-charge.) Ammendment-13-Item-5.16.6 5.16.6 Thermo-Mechanically Treated bars.(TMT) FE 500 D conforming to IS 1786 100.00Kg. Steel Per/Cu. M. Of R.C.C. R.C.C. Qty.= 37.24 Total Steel 37.24 x 100.0 = 3724 kg.

Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorpt ion not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. S.O.R.-Item-6.6.2-Page- 6.6.2 Cement Mortar 1:6 (1 cement : 6 sand)

12mm cement plaster of mix : S.O.R.-Item-13.1.1-Page- 13.1.1 1:4 (1 cement : 4 sand)

20mm cement plaster of mix : S.O.R.-Item-13.3.1-Page- 13.3.1 1:4 (1 cement : 4 sand)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : S.O.R.-Item-13.56.1-Page- 13.56.1 New work (Two or more coats applied @1.43 ltr/10 sqm over and including base coat of water proofing cementpaint applied @2.20kg/10 sqm).

Providing and Fixing of sky lights consisting of Multi cell/tight cell Polycarbonate Panel System of approved colour, 16 mm thick (minimum) having uniform in color with an integral Tight-Cell core constructed not to exceed 4mmx4mm in a cross section, Vertical Standing Seam manufactured at both sides of the panel. Snap-on connector to interlock the panels shall have a grip-lock double tooth locking mechanism to ensure maximum uplift capability and shall be of same color as that of panel. Panel shall be factory sealed/end welded panels with additional End-cap/Aluminium U-Profile (mill finish) for ends. Panel shall be co-extruded with special anti glare compound and UV protected. The full system shall be fitted on MS purlins perpendicular to direction of sheeting with purlin spacing as specified by Manufacturer. The rate includes cost of all the operations, labour and all materials and tests (as applicable) involved such as bolts nuts and screws etc. and labour for cutting bending to required profile, necessary scaffolding, hoisting in position etc. for proper completion of the work etc. complete as per specification drawings and direction of Engineer in charge. Finished surface area of roofing fixed over steel tublar structure shall be measured for payment. MS tabular frame work shall be measured separately for payment. S.O.R.-Item-12.18-Page- 12.18.1 10mm thick

Providing and Fixing of sky lights consisting of Multi cell/tight cell Polycarbonate Panel System of approved colour, 16 mm thick (minimum) having uniform in color with an integral Tight-Cell core constructed not to exceed 4mmx4mm in a cross section, Vertical Standing Seam manufactured at both sides of the panel. Snap-on connector to interlock the panels shall have a grip-lock double tooth locking mechanism to ensure maximum uplift capability and shall be of same color as that of panel. Panel shall be factory sealed/end welded panels with additional End-cap/Aluminium U-Profile (mill finish) for ends. Panel shall be co-extruded with special anti glare compound and UV protected. The full system shall be fitted on MS purlins perpendicular to direction of sheeting with purlin spacing as specified by Manufacturer. The rate includes cost of all the operations, labour and all materials and tests (as applicable) involved such as bolts nuts and screws etc. and labour for cutting bending to required profile, necessary scaffolding, hoisting in position etc. for proper completion of the work etc. complete as per specification drawings and direction of Engineer in charge. Finished surface area of roofing fixed over steel tublar structure shall be measured for payment. MS tabular frame work shall be measured separately for payment. S.O.R.-Item-12.18-Page- 12.18.2 16mm thick

Providing and fixing cast iron / M.S. fabricated decorative gates, pillars, railing, shades, mehrab and benches as per the approved drawing of make Dwarka India / Puja Industries / Gopi Intercast. The cast iron shade should confirm, FG-150 as per IS Specifications hardness 135-165 BHN. Item includes colours finishing of all parts by sand blast / shot blast process to exposed metal surface, application of epoxy primer as rust preventive coat & one coat of epoxy top coat to give required antique shade, and final coat of base licquer to prevent the colours from UV rays item i/c. cutting and fixing of members by nut bolts, welding with Co2/M.IG, grinding, smmoth finishing, transportation, labour, tools and plants etc. complete as per direction of Engineer-in-charge.Proposed Ornamental Grill & Gates at V.I.P. Entry behind Dharamshala Shri Mahakaleswar Temple Ujjain.(UDA AMENDMENT)

Providing and fixing cast iron / M.S. fabricated decorative gates, pillars, railing, shades, mehrab and benches as per the approved drawing of make Dwarka India / Puja Industries / Gopi Intercast. The cast iron shade should confirm, FG-150 as per IS Specifications hardness 135-165 BHN. Item includes colours finishing of all parts by sand blast / shot blast process to exposed metal surface, application of epoxy primer as rust preventive coat & one coat of epoxy top coat to give required antique shade, and final coat of base licquer to prevent the colours from UV rays item i/c. cutting and fixing of members by nut bolts, welding with Co2/M.IG, grinding, smmoth finishing, transportation, labour, tools and plants etc. complete as per direction of Engineer-in-charge. Proposed Ornamental Gates at Pravachan Hall & Dharamshala Shri Mahakaleswar Temple Ujjain..(UDA AMENDMENT)

Providing and fixing cast iron / M.S. fabricated decorative gates, pillars, railing, shades, mehrab and benches as per the approved drawing of make Dwarka India / Puja Industries / Gopi Intercast. The cast iron shade should confirm, FG-150 as per IS Specifications hardness 135-165 BHN. Item includes colours finishing of all parts by sand blast / shot blast process to exposed metal surface, application of epoxy primer as rust preventive coat & one coat of epoxy top coat to give required antique shade, and final coat of base licquer to prevent the colours from UV rays item i/c. cutting and fixing of members by nut bolts, welding with Co2/M.IG, grinding, smmoth finishing, transportation, labour, tools and plants etc. complete as per direction of Engineer-in-charge.Proposed Ornamental Gates at Bhasmarti Corridor Shri Mahakaleswar Temple Ujjain..(UDA AMENDMENT)

Providing and fixing cast iron / M.S. fabricated decorative gates, pillars, railing, shades, mehrab and benches as per the approved drawing of make Dwarka India / Puja Industries / Gopi Intercast. The cast iron shade should confirm, FG-150 as per IS Specifications hardness 135-165 BHN. Item includes colours finishing of all parts by sand blast / shot blast process to exposed metal surface, application of epoxy primer as rust preventive coat & one coat of epoxy top coat to give required antique shade, and final coat of base licquer to prevent the colours from UV rays item i/c. cutting and fixing of members by nut bolts, welding with Co2/M.IG, grinding, smmoth finishing, transportation, labour, tools and plants etc. complete as per direction of Engineer-in-charge.Proposed Ornamental Grill & Gates at Bhasmarti Corridor Shri Mahakaleswar Temple Ujjain..(UDA AMENDMENT)

Providing and fixing cast iron / M.S. fabricated decorative gates, pillars, railing, shades, mehrab and benches as per the approved drawing of make Dwarka India / Puja Industries / Gopi Intercast. The cast iron shade should confirm, FG-150 as per IS Specifications hardness 135-165 BHN. Item includes colours finishing of all parts by sand blast / shot blast process to exposed metal surface, application of epoxy primer as rust preventive coat & one coat of epoxy top coat to give required antique shade, and final coat of base licquer to prevent the colours from UV rays item i/c. cutting and fixing of members by nut bolts, welding with Co2/M.IG, grinding, smmoth finishing, transportation, labour, tools and plants etc. complete as per direction of Engineer-in-charge.Proposed Ornamental Grill & Gates Near ATM Shri Mahakaleswar Temple Ujjain..(UDA AMENDMENT)

Providing and fixing cast iron / M.S. fabricated decorative gates, pillars, railing, shades, mehrab and benches as per the approved drawing of make Dwarka India / Puja Industries / Gopi Intercast. The cast iron shade should confirm, FG-150 as per IS Specifications hardness 135-165 BHN. Item includes colours finishing of all parts by sand blast / shot blast process to exposed metal surface, application of epoxy primer as rust preventive coat & one coat of epoxy top coat to give required antique shade, and final coat of base licquer to prevent the colours from UV rays item i/c. cutting and fixing of members by nut bolts, welding with Co2/M.IG, grinding, smmoth finishing, transportation, labour, tools and plants etc. complete as per direction of Engineer-in-charge.Proposed Ornamental Grill & Gates at Shahnai Dwar Shri Mahakaleswar Temple Ujjain..(UDA AMENDMENT)

Providing and fixing cast iron / M.S. fabricated decorative gates, pillars, railing, shades, mehrab and benches as per the approved drawing of make Dwarka India / Puja Industries / Gopi Intercast. The cast iron shade should confirm, FG-150 as per IS Specifications hardness 135-165 BHN. Item includes colours finishing of all parts by sand blast / shot blast process to exposed metal surface, application of epoxy primer as rust preventive coat & one coat of epoxy top coat to give required antique shade, and final coat of base licquer to prevent the colours from UV rays item i/c. cutting and fixing of members by nut bolts, welding with Co2/M.IG, grinding, smmoth finishing, transportation, labour, tools and plants etc. complete as per direction of Engineer-in-charge.Proposed Ornamental Railling at Police Chouki Shri Mahakaleswar Temple Ujjain..(UDA AMENDMENT)

Providing and fixing cast iron / M.S. fabricated decorative gates, pillars, railing, shades, mehrab and benches as per the approved drawing of make Dwarka India / Puja Industries / Gopi Intercast. The cast iron shade should confirm, FG-150 as per IS Specifications hardness 135-165 BHN. Item includes colours finishing of all parts by sand blast / shot blast process to exposed metal surface, application of epoxy primer as rust preventive coat & one coat of epoxy top coat to give required antique shade, and final coat of base licquer to prevent the colours from UV rays item i/c. cutting and fixing of members by nut bolts, welding with Co2/M.IG, grinding, smmoth finishing, transportation, labour, tools and plants etc. complete as per direction of Engineer-in-charge.Proposed Ornamental Gates behind Police Chouki Shri Mahakaleswar Temple Ujjain..(UDA AMENDMENT)

Providing and fixing cast iron / M.S. fabricated decorative gates, pillars, railing, shades, mehrab and benches as per the approved drawing of make Dwarka India / Puja Industries / Gopi Intercast. The cast iron shade should confirm, FG-150 as per IS Specifications hardness 135-165 BHN. Item includes colours finishing of all parts by sand blast / shot blast process to exposed metal surface, application of epoxy primer as rust preventive coat & one coat of epoxy top coat to give required antique shade, and final coat of base licquer to prevent the colours from UV rays item i/c. cutting and fixing of members by nut bolts, welding with Co2/M.IG, grinding, smmoth finishing, transportation, labour, tools and plants etc. complete as per direction of Engineer-in-charge.Proposed security hutt at Bhasamarti Gates & Pravachan Hall Gates Shri Mahakaleswar Temple Ujjain..(UDA AMENDMENT)

Providing and fixing cast iron / M.S. fabricated decorative gates, pillars, railing, shades, mehrab and benches as per the approved drawing of make Dwarka India / Puja Industries / Gopi Intercast. The cast iron shade should confirm, FG-150 as per IS Specifications hardness 135-165 BHN. Item includes colours finishing of all parts by sand blast / shot blast process to exposed metal surface, application of epoxy primer as rust preventive coat & one coat of epoxy top coat to give required antique shade, and final coat of base licquer to prevent the colours from UV rays item i/c. cutting and fixing of members by nut bolts, welding with Co2/M.IG, grinding, smmoth finishing, transportation, labour, tools and plants etc. complete as per direction of Engineer-in-charge.Proposed welcome gates near madhav sewa nyas harsiddhi choraha & other place at Shri Mahakaleswar Temple Ujjain. 3 x 21000 Kg..(UDA AMENDMENT)

Providing and fixing cast iron / M.S. fabricated decorative gates, pillars, railing, shades, mehrab and benches as per the approved drawing of make Dwarka India / Puja Industries / Gopi Intercast. The cast iron shade should confirm, FG-150 as per IS Specifications hardness 135-165 BHN. Item includes colours finishing of all parts by sand blast / shot blast process to exposed metal surface, application of epoxy primer as rust preventive coat & one coat of epoxy top coat to give required antique shade, and final coat of base licquer to prevent the colours from UV rays item i/c. cutting and fixing of members by nut bolts, welding with Co2/M.IG, grinding, smmoth finishing, transportation, labour, tools and plants etc. complete as per direction of Engineer-in-charge.Proposed gates, grill & railing at new facility center near shankh tringle & above Sabha Mandap railling and gates..(UDA AMENDMENT)

Providing and fixing cast iron / M.S. fabricated decorative gates, pillars, railing, shades, mehrab and benches as per the approved drawing of make Dwarka India / Puja Industries / Gopi Intercast. The cast iron shade should confirm, FG-150 as per IS Specifications hardness 135-165 BHN. Item includes colours finishing of all parts by sand blast / shot blast process to exposed metal surface, application of epoxy primer as rust preventive coat & one coat of epoxy top coat to give required antique shade, and final coat of base licquer to prevent the colours from UV rays item i/c. cutting and fixing of members by nut bolts, welding with Co2/M.IG, grinding, smmoth finishing, transportation, labour, tools and plants etc. complete as per direction of Engineer-in-charge.Proposed signages as per architectural drawings..(UDA AMENDMENT)

Providing and fixing cast iron / M.S. fabricated decorative gates, pillars, railing, shades, mehrab and benches as per the approved drawing of make Dwarka India / Puja Industries / Gopi Intercast. The cast iron shade should confirm, FG-150 as per IS Specifications hardness 135-165 BHN. Item includes colours finishing of all parts by sand blast / shot blast process to exposed metal surface, application of epoxy primer as rust preventive coat & one coat of epoxy top coat to give required antique shade, and final coat of base licquer to prevent the colours from UV rays item i/c. cutting and fixing of members by nut bolts, welding with Co2/M.IG, grinding, smmoth finishing, transportation, labour, tools and plants etc. complete as per direction of Engineer-in-charge.Proposed Ornamental benches as per architectural drawings..(UDA AMENDMENT)