Upper Krishna Rehabilitation And Resettlement Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 2,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
UKPRR/2021-22/BD/WORK_INDENT872Bid Award Id
ViewTender No
UKPRR/2021-22/BD/WORK_INDENT872Tender Authority
Upper Krishna Rehabilitation And Resettlement ViewPurchaser Address
-Website
http://eproc.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earthwork excavation in all soil deposits and filling sides of foundation upto piinth in layers not exceeding 20cms. in depth, compacting each deposited layer by ramming after watering with all lead and lift including cost of all labour complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
439.0871
-
176952.1
Filling available excavated earth (excluding rock) in sides of foundations upto plinth in layers not exceeding 20 ems. in depth, compacting each deposited layer by ramming after watering with lead upto 50 m. and lift upto 1.5 m. including cost of all labour complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
98.6
-
19818.6
Providing and laying in position plain cement concrete of mix M7.5 with OPC cement @ 180kgs, with 40mm and down size graded granite metal coarse aggregates @0.85cum and fine aggregtes @ 0.57cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation and plinth, including cost of all materials, labour, HOM of machinery, curing complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
52.9737
-
275410.27
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
135.72
-
34608.6
Providing and constructing granite I trap I basalt rubble stone masonry in foundation with cement mortar (uncoursed), bond stones at 2m. apart in each course including cost of materials, labour, curing complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
30.96
-
108731.52
Providing and constructing granite I trap I basalt size stone masonry in basement with cement mortar 1:6, edges of stones chistle dressed in courses not less than 15 ems high, bond stones at 2m. apart in each course including cost of materials, labour, curing complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
51.0785
-
295846.67
Providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for sides and soffits of beams, beams haunchings, cantilever, girders, bressumers and lintels exceeding 1m in depth including cost of all materials, labour complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
300.824
-
120028.78
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1m in depth including cost of all materials, labour complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
569.2918
-
166233.21
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for columns, pillars, post and struts, square I rectangular/ polygon in plan including cost of all materials, labour complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
527.114
-
240363.98
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for columns, pillars,post and struts, circular or curved in plan including cost of all materials, labour complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
19.928
-
17437
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies and likes thickness upto 200mm including cost of all materials, labour complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
171.276
-
67825.3
Providing and removing centering, shuttering, strutting, propping & removal of form work etc., for edges of slabs and breaks in floor including cost of all materials, labour complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
14.28
-
10310.16
Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.46cum, with superplastisiser @3lts confirming to IS9103- 1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for R.C.C. beams, columns of all sizes in foundation plinth and superstructure ground floor level for roof slabs, staircase, lintles, columns, including cost of all materials, labour, HOM of machinery, curing, complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
214.1612
-
1272545.85
Providing and removing centering, shuttering, strutting, propping etc, and removal of form work for chajja, corbels etc., including edges including cost of all materials, labour complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
29.619
-
9478.08
Providing and laying in position reinforced cement concrete of design Mix M20 with OPC @ 27.20kgs, with 12mm and down size graded granite metal coarse aggregates @0.05865cum and fine aggregtes@ 0.0391cum, with super plasticisers @0.2251ts, machine mixed, well compacted for plain chajja of 8.5 ems. average thickness, upto ground floor level, including cost of all materials, labour, HOM finishing, curing, complete but excluding cost of reinforcement as per specifications with all lead and lift and as directed by the Engineer incharge of work.
29.619
-
14809.5
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
11.5642
-
820572.5
Providing and constructing burnt brick masonry with approved quality of modular bricks ground moulded of standard size of class designation 3.5 N/Sqmm with cement mortar1:6 for basement and superstructure with cost of materials, labour charges, scaffolding, curing complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
56.3509
-
343346.03
Fabrication supplying and erecting M.S. tubular trusses of all spans as per approved drawing & design with prefabricated steel applications using quality material and are durable, reliable and corrosion and abrasion resistant. Welding shall confirm to latest structural welding code. Quality shall be on various parameters like shape, size, design gauge and polish. The entire trusses is anchored in RCC column by using 4 nos of M.S. anchor bolts at each support with 1Omm thick base plate and shoe plate. The work includes cutting, straightening, placing in position of M.S. pipes and welding wherever necessary and applying one coat of redoxide primer coat to all the members including cost of all materials, labour charges, and hire charges of machineries for cutting, welding, grinding and erection equipments, with all lead and lift, transportation, letc., complete as per specification with all lead and lift and as directed by the Engineer incharge of work.
7681.2644
-
852620.35
providing and fixing M.S bars to windows and ventilators in cluding cutting and making holes in frame work two coats of approved paints with all lead and lift and as directed by the Engineer incharge of work.
51.26
-
6715.06
Providing and installing of approved make pre painted Galvalume iron Accessories, like, plain, ridges, plain gutter, plain flashing, corner Trim, etc The total coated thickness (TCT) of the sheet shall be 0.47 mm +!- 0.02 tolerance mm Zinc-Aiu Alloy coating AZ 150 gsm as per ASTM 1397/755-550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling I self tapping screws of 25 mm length. (width upto 500-600 mm only), to be fixed over the existing purlins, rafters, channels and trusses with all lead and lift and as directed by the Engineer incharge of work.
197.6174
-
146236.88
Providing and installing of pre painted Galvalume iron Trapezoidal profiled sheet of approved make 1060 mm width (1000 mm cover width), 28-30 mm crest height with crest distance of 200 mm c/c with 2 ribs at the centre for stiffening. The total coated thickness (TCT) of the sheet will be 0.47 mm +/- 0.02 mm tolerance Zinc-Aiu Alloy coating AZ150 gsm as per ASTM 1397/A755-550 mpa steel grade, 5-7 microns epoxy with all lead and lift and as directed by the Engineer incharge of work.
265.69
-
204581.3
Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to ceiling including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
176.8435
-
39612.94
Providing and laying integral cement based waterproofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc , consisting of following application. (a) Applying and grouting a slurry coat of neat cement using 2.75 kglsqm of cement admixed with proprietary water proofing compound conforming to 18:2645 over the RCC slab after cleaning the surface before treatment. (b) Laying cement concrete using broken brick bats 25mm to 1OOmm size with 50% of cement mortar 1:5 admixed with proprietary water proofing compound conforming 18:2645 over 20mm thick layer of cement mortar 1:5 admixed with proprietary water proofing compound to required slope and treating similarly the adjoining walls upto 300mm height including rounding off junctions of walls and slabs. (c) After two days of proper curing, applying a second coat of cement lurry admixed with proprietary water proofing compound (d) Finishing the surface with 20mm thick joint less cement mortar of mix 1:4 admixed with proprietary water proofing compound and finally finishing the surface with trowel and neat cement slurry and making of 300x300mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test including cost of materials, labour complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
126.4519
-
126704.8
Providing and laying in position plain cement concrete of Mix 1:2:4 with OPC @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878 cum and fine aggregtes @ 0.53cum, machine mixed, concrete laid in layers not exceeding 15 ems. thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour, HOM curing complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
13.1399
-
69391.81
Providing and laying in position plain cement concrete of mix 1:3:6 with OPC cement @ 220kgs, with 20mm and down size graded granite metal coarse aggregates @0.84cum and fine aggregtes @ 0.56cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, ncluding cost of all materials, labour, HOM of machinery, curing complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
56.088
-
303604.34
Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, including cost of materials, labour, curing, polishing complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
402.144
-
503484.29
Providing 12mm thick cement plaster in single coat with cement mortar 1:6, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
284.38
-
54885.34
Providing 12mm thick cement plaster in CM 1:4 single coat with cement mortar to brick masonry including rounding off corners wherever required smooth rendering, Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
1158.605
-
235196.82
Providing and laying heavy duty cobble stones interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per sqm over 50mm thick sand bed (average thickness) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between JOints, final compaction of paver surface JOints into its final level, including cost of materials, labour and HOM complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
445.53
-
470479.68
Providing 20mm thick cement plaster in single coat with cement mortar 1:6, to stone masonry & concrete surface including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
55.47
-
14976.9
Providing 15mm thick cement plaster in single coat with cement mortar 1:6 to brick masonry including rounding off corners wherever required srnooth rendering, Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
719.417
-
149638.74
Providing 20mm thick cement plaster in single coat with cement mortar, to stone masonry & concrete surface including rounding off corners wherever required smooth rendering, including providing and removing scaffolding, cost of materials, labour, curing etc., complete as per specification.in cm 1:3 with all lead and lift and as directed by the Engineer incharge of work.
35.45
-
10174.15
Providing Mathi / Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and side clamps ), but including cost of materials, labour, HOM of machineries complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
1.2369
-
69455.65
Providing and fixing in positionMathi/ Nandi wood fully panelled shutters for windows with styles and rails of 30mm. thick, 75mm wide in two halves with panels of 20mm thick including cost of materials, labour charges, HOM of machineries complete as per specifications. (excluding cost of fixtures ) Specification with all lead and lift and as directed by the Engineer incharge of work.
4.53
-
15026.01
Providing and fixing in position fully panelled Mathi/ Nandi wood shutters for doors, styles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, HOM of machineries complete as per specifications. (excluding cost of fixtures) with all lead and lift and as directed by the Engineer incharge of work.
9.45
-
30825.9
Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum Ti02(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer framehaving a overall size of 50mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with Gi reinforcement of 1mm for the frame and 1.5 mm for the sash. Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standardhardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8+-0.2 mm. Maximum possible size - 1519mm x 1519mm with all lead and lift and as directed by the Engineer incharge of work.
22.32
-
101332.8
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum Ti02(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with Gl reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm. Maximum possible size - 1OOOmm x 1000mm. v
8.64
-
31380.48
Providing and fixing pull and push type rolling shutters of approved make out of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with interlocking arrangements for steel laths by means of alternate clips, suspension shaft with High tension coil type springs two numbers, mounted on specially designed pipe shaft, with bracket plates, guide channels, ball bearing arrangements, for inside & outside locking with push & pull operations complete including pulling hooks, 4Nos. handles with all fittings and accessories, painted with a coat of red lead paint (without top cover) cost of materials, labour, HOM complete as per specifications. Shutter size 3.00mx2.8 m
4.32
-
11262.24
Providing and fixing top covers made out of 20 guage M.S. sheet over pull and push rolling shutters bent to shape including cost of red lead primer coat of painting, materials, labour, HOM complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
2.4
-
1156.8
Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
7
-
9583
Fixing of window frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
4
-
3720
Providing and fixing M.S.grill work for windows and ventilators weighing 21kg/sqm using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
2295.97
-
218117.15
Providing and applying two coats with oil bound washable distemper of approved brand and shade on wall surface including priming coat with distemper primer after throughly brooming the surface free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications.(for ceiling) with all lead and lift and as directed by the Engineer incharge of work.
176.84
-
20867.12
Providing and applying two coats with oil bound washable distemper of approved brand and shade on wall surface including priming coat with distemper primer after throughly brooming the surface free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications.(for walls) with all lead and lift and as directed by the Engineer incharge of work.
360.7
-
39677
Providing and finishing external walls in two coats with waterproof cement paint of approved brand and shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications.(with primer) with all lead and lift and as directed by the Engineer incharge of work.
1957.98
-
199713.96
Providing white washing to ceiling and / or sloping roof surfacein two coats with lime of approved quality, to give an even shade including cost of materials, labour, complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
29.31
-
381.03
Applying priming coat over new wood surface and / or wood based surface, after brushing with ready mix enamel priming paint including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, sand papering and knotting ready mix paint including cost of materials, labour, complete as per specifications.
69.0526
-
3452.63
Providing and applying painting two coats ( excluding priming coat ) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning the surface of all dirt, dust and foreign matter, sand papering including cost of materials, labour, complete as per specifications.
79.2926
-
7691.38
Providing and applying enamel metal paint two coats ( excluding priming coat ) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications.
393.984
-
37428.48
Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure 63 mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications
10.2
-
3794.4
Providing and fixing M.S. Gate as per Chief Architect Drawing, using 50mm x 50mm 14 guage M.S. hollow pipe frame work bent to ornamental shape as shown in the drawing and 35mm x 6mm and 16 x 16mm Square rods for verticals alternatively spaced at 4cms c/c in two halves and 40mmx6mm M.S. flats for horizontal member and at the top cast iron spikes are provided at alternate vertical members as shown in the drawing etc., complete. All the steel surface should be thoroughly cleaned free of rust and painted with anti corrosive paint (shop paint) etc., complete. The work includes cost of all materials, labour charges for all items of work, hire charges for welding, cutting and grinding equipment, and electricity charges, with lead and lift, loading and unloading charges, etc., complete as per specification.
12.32
-
37107.84
Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure 75 mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
36
-
15300
Providing and constructing granite I trap I basalt rubble stone masonry in foundation with cement mortar (uncoursed), bond stones at 2m. apart in each course including cost of materials, labour, curing complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
58.035
-
210492.94
Providing and constructing burnt brick masonry for basement and superstructure with approved quality of non-modular bricks of standard size of class designation 3.5Newton per sqmm with cement mortar1:6 including cost of materials, labour charges, scaffolding, curing complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
119.842
-
722048.05
Providing flush pointing 20 mm deep to square rubble, course or uncoursed stone masonry with cement mortar after raking joints to depth of 20mm nicely lining, including cost of materials, labour, curing complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
30.564
-
4309.52
Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to ceiling including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all lead and lift and as directed by the Engineer incharge of work.
70.766
-
16559.24
Providing and laying flooring for corridors/lobbies using combination of pre polished 19 mm thick water cut/gang saw Grey Granite, Black Granite, and strips of 50mm wide pre flamed grey granite using pre polished grey granite 19mm thick 76%, Pre polished black granite 19mm thick@ 2% and preflamed 19mm thick grey granite @22% over existing cement concrete bed in CM 1:4 average 20mm thick pointed with white cement/colour pigment etc., including cost of all materials, mortar, labour, curing etc., complete as per specification. using 19mm thick granite width not less than 1200mm with all lead and lift and as directed by the Engineer incharge of work.
30.221
-
79148.8
Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 proportion cut to required shape, pattern with paper joints, finished with cement mortal using white cement and colour pigments to match the colour of slab making through jointing with sealant, making holes 25mmx12mm grooves in joints including cost of all materials, mortar, labour, curing etc., complete as per specification with all lead and lift and as directed by the Engineer incharge of work.
26.026
-
92158.07
Providing & fixing of 3track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum Ti02(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame.The outer frame havinga overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with Gl reinforcement of 2mm and mesh sash of size 30mm x 48.5mm. Glazing bead for fixing of glass shall be of size 2Dmm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2119mm. with all lead and lift and as directed by the Engineer incharge of work.
2.64
-
14982
Providing wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, HOM complete as per specifications. Specification No. KBS 9.33 Teak wood frames v
0.186
-
33460.1
Providing and fixing in position fully panelled wood shutters for doors, with styles and rails of 40mm. thick with bottom and lock raiIs 180mm wide top rail and styles 1OOmm wide as per drawing and panels of 25mm thick including cost of materials, labour, HOM complete as per specifications. (excluding cost of fixtures) with all lead and lift and as directed by the Engineer incharge of work.
2.1
-
17392.2
Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and I or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM complete as per specifications.Specification No. KBS 4.6.3 TMT bars Fe 500 with all lead and lift and as directed by the Engineer incharge of work.
7.0094
-
492802.88
Aluminium handles - 15mm with all lead and lift and as directed by the Engineer incharge of work.
4
-
237.28
Aluminium hinges 75 mm length with all lead and lift and as directed by the Engineer incharge of work.
10
-
339
Aluminium tower bolt - 20 cm with all lead and lift and as directed by the Engineer incharge of work.
4
-
305.08
Locking system with all lead and lift and as directed by the Engineer incharge of work.
1
-
847.46
Providing and fixing Pre cast solid concrete kerb stones made out of CC 1:2:4 and finished with CM 1:3 plastering and finishing cutting etc., complete size 450 x 150 x 500 mm with all lead and lift and as directed by the Engineer incharge of work.
272
-
120496
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.56" Sweep (1400mm) Regular model with all lead and lift and as directed by the Engineer incharge of work.
1
-
2127
Supplying…25…mm dia 2mm/2.5mm thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary with all lead and lift and as directed by the Engineer incharge of work.
235
-
12455
Supplying 25 dia 2mm thick heavy gauge PVC Conduit Pipe with bends, metal junction boxes adhesive paste etc.,and bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary with all lead and lift and as directed by the Engineer incharge of work.
146
-
7884
Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete.12"x9"x3" (300x228x76) with all lead and lift and as directed by the Engineer incharge of work.
14
-
1204
Supply and fixing of bakelite D.P/Socket/ switch with/without neon indicator over existing wood board or flush mounting in plastic plates/nitches.as per IS 1293 and IS 3854 16Combined switch and socket with indication Group-A with all lead and lift and as directed by the Engineer incharge of work.
7
-
1225
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade, copper conductor flexible multistrand FRLS PVC insulate, 2x1.5 sqmmcable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch with all lead and lift and as directed by the Engineer incharge of work.
18
-
3600
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade, copper conductor flexible multistrand FRLS PVC insulate, 2x1.5 sqmmcable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch with all lead and lift and as directed by the Engineer incharge of work.
21
-
5775
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade, copper conductor flexible multistrand FRLS PVC insulate, 2x1.5 sqmmcable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Long point above 6Mtr up to 10Mtr from tapping point to out let via switch with all lead and lift and as directed by the Engineer incharge of work.
35
-
14000
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wirein open or concealed system of wiring with specified IS-694;1990 & confirming to GTP of GROUP-A 2.5 SQMM with all lead and lift and as directed by the Engineer incharge of work.
290
-
33350
Supplying 6A flush/projected type socket and 6 amps flush/projected type SP switch either surface/flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required. 6Amps 3/5 Way with all lead and lift and as directed by the Engineer incharge of work.
8
-
1056
Supplying 4mm thick plastic sheet with necessary nitches for fixing switches regulators etc., and fixing on existing wooden or metal box using N.F. screws.
13000
-
3510
Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size …110…mm conduit using necessary machine screws with all lead and lift and as directed by the Engineer incharge of work.
12
-
132
Supplying and fixing a drop light using one PBBC/bakelite pendent holder, PVC insulated twin twisted copper wire of 23/0.0076"upto 1Mtr, one of 60/100 watts lamp of 230 volts grade and one of 5 amps bakelite ceiling rose fixed on the existing wooden block of the outlet with all lead and lift and as directed by the Engineer incharge of work.
9
-
1089
Supplying and fixing PBBC bakelite straight or slant batten holder and wiring, within 60w/230 Volts lamps with all lead and lift and as directed by the Engineer incharge of work.
30
-
2640
Supplying & fxing retroft type -PL- LED Lamp .......W LED linear source with CCT 6500 degree K, CRI> 70%. effcacy >80 lumen per watt, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF > 0.95, power loss should < 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 18-20 Watts with all lead and lift and as directed by the Engineer incharge of work.
27
-
11475
Fixing all types and all capacities of fluorescent/false ceiling/spot light/CFL /LED fittings indoor on the wall / ceiling/ rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps with all lead and lift and as directed by the Engineer incharge of work.
31
-
3410
supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc. for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 46" Economy model with all lead and lift and as directed by the Engineer incharge of work.
16
-
33440
Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing a 5 amperes ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring completely with all lead and lift and as directed by the Engineer incharge of work.
16
-
2400
Supplying and fixing 8 way SP & N regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc.. With provisions for fixing suitable type capacity MCB's single phase /3 phase/single door with powder coated painting. Made out of 14 SWG MS encloure with all lead and lift and as directed by the Engineer incharge of work.
3
-
2880
Supplying and fixing 5-32 Amps SP miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required.confirming to IEC 60898
6
-
2604
Supplying and fixing 5-32 Amps DP miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required.confirming to IEC 60898 with all lead and lift and as directed by the Engineer incharge of work.
5
-
4545
supplying, fixing , wiring, earth electrode for grounding conduits. I.C, cutouts and other equipment's on the meter board using 40mm dia 2.90 mm thick GI pipe 2.5 mtr long buired in a pit… The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc. is to be established through GI wire of size as per ISI specification 7.3.3 of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc. the pipe shall have 16 through holes of 122 mm dia. with all lead and lift and as directed by the Engineer incharge of work.
3
-
8999.1
Supplying of 1.1 kv 2 core 10 sqmm LT UG cable having aluminium conductor PVC insulated, extruded inner sheathed, galvanised, steel strip ( except 2Cx10sq.mm wire armoured) confirming to IS-3975:1990 (No. of strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 part-1:1988 & confirming to GTP of GROUP-A with all lead and lift and as directed by the Engineer incharge of work.
220
-
20900
Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe/stoneware pipe/on wall/on pole as required with all lead and lift and as directed by the Engineer incharge of work.
200
-
2376
Digging of trench of 0.6 m deepx0.50 mtr wide in hard soil refilling the trench to the required ground level and consolidating etc complete with all lead and lift and as directed by the Engineer incharge of work.
180
-
18360
supplying, fixing and wiring electronic 5 to 20 Amps single phase class-1 Accuary with Temper proof Energy Meter with all lead and lift and as directed by the Engineer incharge of work.
3
-
3450
Supplying andfixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1KV with all lead and lift and as directed by the Engineer incharge of work.
18
-
6030
Supplying PVC/GI flexible conduit pipe25…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and the either end of the pipe terminated completely with all lead and lift and as directed by the Engineer incharge of work.
15
-
420
supplying and fixing LT cast Iron pot heads suitable for 1.1 kv class 10 sqmm UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc.with all lead and lift and as directed by the Engineer incharge of work.
2
-
520
supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 kv class (metal only) 25 mm with all lead and lift and as directed by the Engineer incharge of work.
3
-
252
"supplying and installation/Fixing/Provision of 300mmx300mmx214mm Outdoor type Thermoplastic Modular Panel enclosure with transparent polycarbonate Lid, shock proof, IP65 (Weather Proof) rust proof, dust proof, water proof, corrosion proof, having internally Embedded gasket on both lid and flap suitable to fix Single phase/Three phase Energy Meter in suitable base plate and having a provision for Fuse/MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility with all lead and lift and as directed by the Engineer incharge of work.
3
-
11262
Supplying and Fixing of........mm dia class A GI pipe bracket up to 2 Mtrs long bent at suitable angle and fxing to this bracket 1x40/2x40 watts fluorescent tube street light ftting of all capacities to GI or CI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires. 25mm GI Pipe with all lead and lift and as directed by the Engineer incharge of work.
12
-
9300
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fxture with 40W System Power consumption. LED Effciency>130lm/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certifed agency & Design & Development facility certifed by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.with all lead and lift and as directed by the Engineer incharge of work.
12
-
40344
supplying Patti type flourescent tube light fitting of 4 ' -suitable for 28 watts flourescent tube fitting made put of M.S. Sheet and stove enameled with HF Electronic Ballast locking type brass contact holders mounted on double fold type sheet base fully wired for use on 230 volts AC. supply including T5 lamp with all lead and lift and as directed by the Engineer incharge of work.
4
-
2676
Fixing all types and all capacities of fluorescent/false ceiling/spot light/CFL /LED fittings indoor on the wall / ceiling/ rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps on wall/ceiling with all lead and lift and as directed by the Engineer incharge of work.
4
-
440
Supplying and fixing cast Aluminium round or oblong type bulk head fitting with GI wire guard, glass cover with 60/100 watts 230V GLS lamp with all lead and lift and as directed by the Engineer incharge of work.
2
-
1494
Supplying, and fxing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.(Single Arm Bracket with 1500mm Standard 40/50MM dia) with all lead and lift and as directed by the Engineer incharge of work.
2
-
4224
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fxture with ........W System Power consumption. LED Effciency>130lm/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certifed agency & Design & Development facility certifed by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 70 Watts with all lead and lift and as directed by the Engineer incharge of work.
2
-
10960
Supplying & fxing retroft type -PL- LED Lamp .......W LED linear source with CCT 6500 degree K, CRI> 70%. effcacy >80 lumen per watt, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF > 0.95, power loss should < 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 8-9 Watts with all lead and lift and as directed by the Engineer incharge of work.
2
-
700
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements