Public Works Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date
1 Jul 2024Closing Soon
11 Jul 2024Tender Amount
₹ 63,80,226Costs
EMD
₹ 1,28,000Document Cost
₹ 2,000Tender Fee
Refer Documents
Summary
Construction Of Govt. Sr. Sec. School Building At Sandoa Distt. Shimla H.p
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_89875_1Tender No
2662-2712 dated 27.06.2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. All kinds of soil.
51.64
16870
326.7
Filling in plinth with sand under floors including watering ramming consolidating and dressing complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
6.66
13879
2084
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concretecomplete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
56.15
16002
285
Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
72.54
40259
555
Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts Circular complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
86.4
39830
461
Centering and shuttering including strutting, propping etc. and removal of form for : Stairs, (excluding landings) except spiral stair cases complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
34.16
20256
593
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
70.22
31950
455
Centering and shuttering including strutting, propping etc. and removal of form for : Edges of slabs and breaks in floors and walls Under 20 cm wide including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
85.89
11079
129
Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
59.26
33126
559
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 Cement : 5 coarse sand) : 10 graded stone aggregate 40mm nominal size) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
6.24
30123
4827.5
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate including carriage of material within all leads and lifts as per direction of Engineer-in-charge
36.93
18769
508.25
Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
0.62
3692
5956
Providing and Laying concrete for plain/reinforcement concrete in open foundation and plinth complete as per drawing and Technical Specifications clause 802, 803, 1202 & 1203 for plain/ reinforcement including carriage of materials as per the direction of Engineer-In-Charge. Cement concrete1:3:6 nominal mix (1 Cement :3 sand :6 graded crushed stones aggregate 40 nominal size) Including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
177.2
974600
5500
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: i)1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
20.06
165970
8273.7
Reinforced cement concrete work in beams, suspended floors, roofs landings, balconies, shelves, chajjas, lintels, bands, plain window sills, above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
36.9
372321
10090
Reinforced cement concrete work in columns, pillars,posts and struts etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
9.22
89609
9719
Reinforced cement concrete work in Stair cases ( except spiral stair case ) excluding landings but including preparing of the surface & finishing of nosing upto all floor level complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
4.82
48633
10090
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
16.3
158419
9719
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars. including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
11348.96
1475364
130
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in Super structure in : Cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
24.6
25756
1047
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6coarse sand) including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
27.3
200109
7330
Boulder filling tightly hand packed under floor including watering, ramming, consolidating etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
4.99
6682
1339.25
Providing and fixing double rebate door frame manufactued from ISLC 125mm (with MS Flat 125mm X 4mm for cenrte frame) & MS hollow section for rebate 40mm X 20mm and 2.00mm thick welded together for making rebate i/c MS Flat Holdfast 30cm long and 4mm thick embedded in C.C Block 1:3:6 as per design and drawing i/c jambs, lock jamb, beed and if required angle threshold of mild steel angle 50x25mm welded or rigidly fixed by mechanical means lugs with split end tails to each jamb i/c steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorbers as specified and applying a coat of steel primer after pre treatment of the surface complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge:- side/end mullion.
337.2
486326
1442.25
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers, 35mm thick including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
7.38
23652
3205
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws including all leads and lifts and as directed by theEngineer-in-Charge. : 35mm thick shutters deodar wood.
18.09
70044
3872
Providing and fixing paneled glazed or paneled and glazed shutters for doors, windows and clearstory windows including black enameled iron butt hinges with necessary screws: (i). 35 mm thick
10.71
34872
3256.1
Providing and fixing M.S. grills of requirepattern in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws. including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
532.8
71235
133.7
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. : 200mm x 10mm.
6
420
70
150X 10 mm
68
2992
44
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. :125mm.
6
289
48.25
100mm.
68
2992
44
Providing and fixing aluminium sliding door bolts (Barrel type) anodized transparent or dyed to required shade and colour with bolts and nuts etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.:-300 X 16 mm
3
1440
480
Providing & fixing 115 mm M.S bright finished brass hasps and stapples (safety type)with necessary screws complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
6
537
89.5
Providing and fixing oxidised M.S hooks and eyes 150mm complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
17
1001
58.9
Providing & fixing bright finished brass hanging type door floor stopper with necessary screws, etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
3
329
109.75
Providing and fixing bright finished brass brass Automatic Hydraulic Door Closer of suitable size with necessary screws, etc. complete including carriage of materials in all leads and lifts.
3
6432
2144
6mm cement plaster to ceiling in cement mortar 1:3 (1 cement : 3 sand) including entire carriage of materials in all leads and lifts.
83.66
16790
200.7
15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth.Cement Mortar 1:6 (1Cement:6 Sand) including entire carriage of materials in all leads and lifts.
202.14
53385
264.1
15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth Cement Mortar 1:6(1 cement : 6 sand) including entire carriage of materials in all leads and lifts.
228.17
60259
264.1
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
513.97
38547
75
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
10.71
650
60.75
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture. including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
16.83
2334
138.7
Distempering with acrylic/oil bound washable distemper of approved brand and manufacture to give an even shade in ceiling and slopy roof :New work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
311.83
36250
116.25
Finishing wall with weather proof exteriorgrade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete. including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
202.14
30947
153.1
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
872.28
125913
144.35
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
76.91
11544
150.1
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.. including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
7.18
58710
8177
Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or peasized gravel spread at 6 cubic decimeter per square metre, including preparation of surface but excluding grading complete with :. complete as per design approved by Engineer-in-Charge.
49.82
24287
487.5
Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.
98.2
147771
1504.8
Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges. Ridges plain (500 - 600mm)
25.2
14399
571.4
Providing and fixing valley 60 cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge., North light curves
8.7
5414
622.4
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Flashings/ Aprons.( Upto 600 mm) including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
21
13230
630
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter (600 mm over all girth)
33.76
39971
1184
Providing and fixing MS BP sheet 2.00 mm thick in eves board /facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
37.27
84951
2279.35
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
2946
333133
113.08
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
2
17180
8590
Painting one coat of priming on new steel and other metal surfaces eith enamel paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foregin matters :-- With ready mixed paint including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
409.43
27165
66.35
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture:steel surfaces including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
475.15
66521
140
Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 20 mm thick. including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
119.5
205277
1717.8
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
18.41
35198
1911.9
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
43.4
5952
137.15
Providing & fixing on wall face unplasticised- PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A110 mm dia including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
36
12146
337.4
PVC bend 87.5° 110 mm bend.
12
4646
387.2
PVC Door bend 110 mm bend
12
3159
263.3
PVC plain shoe 110mm
12
1621
135.1
PVC collars 110mm
12
1959
163.3
Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised - PVC rain water pipes including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
12
5364
447
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm (seventy millimetre) thick (unconsolidated) bed dry brick / stone aggregate 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
16.36
10820
661.4
Providing and laying Cement concrete drain with cement concrete 1:3:6 ( 1 cement : 3 Sand : 6 graded stone aggregate 20 mm nominal size) mechanically mixed in open mix ed in open surface drain with plinth protection having internal size 20 x 15 cm & (twenty into fifteen centimter) with side wall of 10 cm ( ten centimter) thick & inside plastering with CM 1:3 including earthwork & finished with floating coat of neat cement complete as per standard design as per HPPWD specifiction 1990 volume -1 (one) including carriage of all labour equipments and materials to various location through complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
23.37
21703
928.7
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455mm x 610mm internal dimensions, total weight of cover with frame to be not less than 38kg (weight of cover 23kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design including carriage of material in all leads and lifts as per direction of the Engineer in Charge.: - Inside dimensions 455mm x 610mm and 45cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.50.
3
13018
4339.65
Providing weep holes in brick masonry/ stone masonry/ plain reinforced concrete abutment, wing wall, return wall with 100 mm dia. PVC pipe extending through the full width of the structure with slope of 1(v) :20(H) towards drawing face complete as per drawing and technical specification clauses 614,709,1204.3.7 including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
17
4154
244.4
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification clause 1204.3.8 Granular material
9.52
14272
1499.16
Providing and fixing 20mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. External work including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
50
18882
377.65
Providing & Fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS-15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend & brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1m spacing. This includes the costs of cutting chases & including testing of joints complete as per direction of the engineer in charge: (i) 1216 (16 mm OD) pipe. including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
66
19126
289.8
Providing and fixing 15 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
26
9131
351.2
Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. (cost of water meter and stop cock to be paid separately).
1
537
537.6
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
2000
17300
8.65
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455mm x 610mm internal dimensions, total weight of cover with frame to be not less than 38kg (weight of cover 23kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design including carriage of material in all leads and lifts as per direction of the Engineer in Charge.: - Inside dimensions 455mm x 610mm and 45cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.50. including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
5
23914
4782.8
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.:-110mm dia.
12
4436
369.7
150 mm dia.
21
13353
635.9
Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-150mm dia.
3
1572
524.2
110 mm dia
3
966
322
Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-150mm dia.
3
1572
524.2
110 mm dia
3
819
273.2
Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-150mm dia.
3
1588
529.5
110 mm dia
3
1039
346.4
Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-150mm dia.
3
954
318.2
110 mm dia
3
489
163.3
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-150mm dia
3
870
290
110 mm dia
3
405
135.1
Providing and fixing MS clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge:- 150mm dia MS clamp.
5
610
122
110 mm dia
5
469
93.9
Providing and fixing PVC floor traps ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials within all leads and lifts:-110mm x 90mm
8
3423
427.9
Providing and fixing PVC cowl including carriage of materials within all leads and lifts :-150mm dia.
1
214
214.1
110 mm dia.
1
118
118.3
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
2
14451
7225.94
P/F Wash basin with C.I. brackets, 15mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting & making good the walls wherever required : (i) White Vitreous China Wash basin size 550 x 400 mm with a 15 mm CP Brass single hole basin mixer. including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
2
5339
2669.75
P/F white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings: including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
2
9000
4500
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board,510x1040 mm bowl depth 250 including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
2
6349
3174.6
Providing and fixing C.P. brass 15 mm single hole basin mixer with casting spout including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
2
3976
1988.3
Providing and fixing C.P. brass waste (heavy duty ISI marked IS:8931 & 8934) for wash basin or sink including carriage of materials within all leads and lifts 32 mm dia
2
400
200
Providing & fixing 110mm dia C.P. grating for floor or nahani / gully / floor trap including carriage of material within all leads and lifts.
8
1096
137
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
2
4343
2171.5
Providing and fixing 600mm X 20mm size C.P. brass towel rail (heavy duty ISI marked IS:8931 & 8934) complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts.
2
2648
1324.1
Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of materials within all leads and lifts.
6
2270
378.4
Providing and fixing 15mm dia CP brass bib tap of (heavy duty ISI marked IS:8931 & 8934) including carriage of materials within all leads and lifts.
2
1495
747.6
Providing and fixing 15mm dia C.P.brass angle valve of jaquar with flange (heavy duty ISI marked IS:8931 & 8934) including carriage of materials within all leads and lifts.
4
3606
901.5
Providing and fixing brass full way valve with wheel including carriage of materials within all leads and lifts :-15mm nominal bore.
2
961
480.9
20mm nominal bore.
2
1388
694.2
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. (New work) :- 15mm nominal bore
2
501
250.8
20mm nominal bore.
2
619
309.7
Providing and laying cement concrete 1:4:8 (1 Cement : 4 Sand : 8 graded stone aggregate 40mm nominal size ) bedding for stoneware pipes of the following internal diameters, necessary form work and curing complete including carriage of materials within all leads and lifts:- 150mm.
1.01
1171
1159.5
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
1
17895
17895.6
Providing and fixing toilet paper holder : C.P. Brass including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
2
1111
555.53
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge
2
703
351.96
P/F 600 x 120 x 5mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
2
1415
707.55
P/F C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931, (i) 15 mm nominal bore including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
4
2578
644.65
Providing and fixing 6"x6" Ultra Slim Brass Rain shower with 12 inch Armr of suitable make complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
2
1874
937.3
Cutting holes up to 15cm x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
10
2575
257.5
Providing & fixing on wall face unplasticised- PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A110 mm dia including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
26
10067
387.2
PVC bend 87.5° 110 mm bend.
12
3642
303.5
PVC Door bend 110 mm bend
12
4368
364
PVC plain shoe 110mm
12
3534
294.5
PVC collars 110mm
12
3552
296
Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised - PVC rain water pipes including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
12
3177
264.8
Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge.
4
733
183.38
Providing and fixing Geyser of 20 ltrs capacity of approved quality and make including pipes and fittings within all leads and lifts as per entire satisfaction and direction of Engoineer-In Charge.
2
25000
12500
Providing and fixing Geyser of 5 ltrs capacity of approved quality and make including pipes and fittings within all leads and lifts as per entire satisfaction and direction of Engoineer-In Charge.
2
10000
5000
Providing and fixing Exhaust Fan of approved quality and make including all leads and lifts as per entire satisfaction and direction of Engoineer-In Charge.
4
8400
2100
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball:- 20mm nominal bore, 120 mm long, weighing not less than 198 gms.
2
832
416
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%