Military Engineer Services Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 95,230Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_MES_245461_1Bid Award Id
ViewTender No
GE/GUR-/NIT-01/2019-20Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
PVORN OF COVERED PARKING IN SMQ AREA, PROVN OF FOOTPATH AT VARIOUS PLACES, PROVN OF STAGING OF WATER TANKS FOR SMQ, PROVN OF WASH ROOM FOR LADIES AT RADAR, PROVN OF LIGHTNING ARRESTOR ABOVE THE EXISTING HEIGHT OF ANTENNA OF RADAR ALONGWITH EARTHING I
BOQ Items
Removal of excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.
-
-
-
M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
40
-
-
M&L for cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.
-
-
-
M&L for Brick work with sub class 'B' Bricks (old size), straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and as directed.
-
-
-
M&L for 150 mm thick Cement Conrete (1:2:4) type B1 (using 20mm graded crushed stone aggregates) as in flooring, finished even and smooth without using extra cement complete all as specified and as directed.
35
-
-
M&L for rendering 15mm thick on other than fair faces of brick work in CM 1:4 finished even & smooth without using extra cement complete all as specified and as directed.
-
-
-
M&L for broken bricks hard core of gauge not exceeding 63mm, deposited, spread levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
1
-
-
M&L for Cement concrete (1:2:4) type B2 (using 40mm graded crushed stone aggregate) for foundations, fillings and mass concrete complete all as specified and as directed.
-
-
-
S&F mild steel work as in wind ties of roof, posts, struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mess etc and necessary) including welding and cutting at bottom etc. and similar work conforming to Fe 290 grade- E165 complete all as specified and as directed.
20
-
-
S&F steel work in tubular trusses, rafters and posts etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 (grade st-240) complete all as specified and as directed.
425
-
-
M&L for applying two coat of cement base paint on new plastered surfaces of walls including preparation of surfaces complete all as specified and as directed.
-
-
-
M&L for providing two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces including preparation of surface of any description over 10 cm width or girth complete all as specified and as directed.
-
-
-
S&F rolled mild steel conforming to Gde Fe 410-0 in joist, channel, angle or tee sections, fixed independently, without connecting plates etc (cut to ordinary length i.e. within 20mm of length indicated) complete all as specified and as directed.
300
-
-
S&F rolled Mild steel plates (plain or chequered) channels, square cut or notched etc conforming to Fe 410-W (Gde-E- 250) quality complete all as specified and as directed.
150
-
-
Surface excavtion n exc (not exceeding) 30 cm deep and averaging 15 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.
235
-
-
M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded crushed stone aggregates) as in sub base of path/roads etc complete all as specified and as directed
235
-
-
M&L for sand cushioning including watering and consolidations etc complete all as specified and as directed.
-
-
-
M&L for coloured, rubber pressed PU Coating type machine presssd pre-cast concrete tiles/inter locking of any shape and size coloured paving Block of glass fibre reinforced vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-25 grade to match with grey cement and pigment etc complete all as specified and as directed.
-
-
-
M&L for RCC M-25 (Nominal mix) (using 20mm graded crushed stone aggregates) for slabs supported on walls, beams, columns and in shelves, the like complete all as specified and as directed.
8.72
-
-
S&F mild steel TMT bars 10mm dia and over cut to length bent to shape required cranking, bending spirally for hooping for columns hooking ends and bindings with and including mild steel wire (Annealed) not less than 0.9mm dia or securing with clips quality confirming to complete all as specified and as directed.
-
-
-
Use and waste of form work to soffits of suspended slab such as roof slab, floor slab landings and similar work not exceeding 200 mm thick for flat rough finish surfaces complete all as specified and as directed.
-
-
-
Use and waste form work to edges of concrete flats, treads, breaks in floors window cills sides of RCC slabs exc 10 cm but not exc 20 cm etc rough finished surface of concrete complete all as specified and as directed.
-
-
-
S&F galvanised steel water tubing 15mm bore medium grade with all fittings and fixed complete to walls & ceiling or laid in floor complete all as specified and as directed.
-
-
-
Ditto all as per Item No. 26 described here in before but for 20mm bore complete all as specified and as directed.
-
-
-
Cutting holes into or through brick/ concrete walls built, in cement mortar, exceeding 150 Sqcm but not exceeding 400 Sqcm in superficial area and making good in cement mortar 1:3 to match with the existing finishes, complete all as specified and as directed.
150
-
-
Dismantling exsiting water tanks exc 500 ltr and n. exc 1000 ltr and removal from site complete all as specified and as directed.
15
-
-
S&F rotational moulded polythene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 500 Litres complete all as specified and as directed.
33
-
-
Fixing Only rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 500 Litres complete all as specified and as directed.
15
-
-
S&F Ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed to 20mm bore dia of pipe etc complete all as specified and as directed.
-
-
-
S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 15mm bore dia of pipe complete all as specified and as directed.
-
-
-
Ditto all as per Item No. 33 described here in before but for 20mm bore complete all as specified and as directed.
-
-
-
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.
-
-
-
S&F 110mm bore PVC (SWR) bends any radius complete all as specified and as directed.
-
-
-
S&F 75mm outer dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement any radius complete all as specified and as directed.
141
-
-
M&L for Lean concrete (1:5:10), type E-2, using 40 mm brick coarse aggregate in filling and mass concrete complete all as specified and as directed.
-
-
-
M&L for 40 mm thick, PCC (1:2:4), type B-1, (using 20mm graded crushed stone aggregate) as in flooring finished even & rough to receive the bedding mortar, complete all as specified and as directed.
-
-
-
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and as directed
30
-
-
M&L for 25 mm thick Cement concrete (1:2:4) type B0 (12.5 mm graded crushed stone aggregate) as in base of floor finish finished even and rough to receive floor bedding complete all as specified and as directed.
10
-
-
M&L for first quality non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick cement screed bed in CM 1:4 complete incl circular cutting or notching and waste complete all as specified and as directed.
-
-
-
M&L for first quality coloured glazed ceramic tiles, fixed in pattern of different colour including border of size 300x 450 x 7mm thick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid on and including 10 mm thick rendering in cement mortar (1:3), including pointing in white cement with pigment to match the shade of tiles, complete all as specified and as directed. Note :- Pattern of the tiles will be decided by GE at the time of execution.
-
-
-
Cutting chases, pinning in brick walls, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc; and cuttings chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth complete all as specified and as directed.
15
-
-
S&F 15mm bore concealed stop cock, regular body with adjustable wall flange, fancy type, chromium plated cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and as directed. Make : CON-083KN of Jaquar
4
-
-
S&F 15mm bore angular stop cock with wall flange, fancy type cast copper alloy with capston head, chromium plated, screwed down high pressure and fixed for iron pipe with CP brass connection pipe with union nuts complete with CP brass flange including cutting and making good the walls where ever required.complete all as specified and as directed. Make : OPL-15053 of Jaquar
6
-
-
S&F bib taps long body 15mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and as directed. Make : CON-107KN of Jaquaror approved equivalent
2
-
-
S&F soap dish brass chromium plated, fixed to plugs with brass chromium plated screws complete all as specified and as directed. Make CAN-1131N of Jaquar
1
-
-
S&F brass chromium plated tubular towel rail 20mm dia “D” type 60 cm long between flanges including brackets complete all as specified and as directed. Make CAN-1111NM of Jaqaur
1
-
-
S&F Ist quality vitreous china wash basin, white, flat back, size 550x400mm (Hindware Cat Part No : 10098), PVC connections suitable for hot and cold water, bottle trap (with internal partition) 32 mm size with 300mm & 190mm long wall connection pipes & wall flange (Make Jaqaur Cat Part No ALD-769L), and fixing with brackets/bolts including cutting and pinning in etc complete all as specified and as directed.
1
-
-
S&F 15 mm bore pillar tap cast copper alloy with capstan heads, chromium plated , screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed. Make Jaquar Cat Part No CQT-23021
-
-
-
S&F 600 x 450 mm size beveled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed with wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed.
-
-
-
M&L for 100mm dia cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, including cement jointing, laid in trenches or in floors including necessary excavation and earth work, complete all as specified and as directed. Note : Extra over for lead joints shall be measured and paid separately.
-
-
-
S&F 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.
-
-
-
S&F Cast iron floor trap with dia of outlet 100 mm, with CP grating hinge type in kitchen and other situation including PCC (1:2:4) type B1 for setting the trap and jointing to waste pipe complete all as specified and as directed.
2
-
-
M&L for gully traps salt glazed stone ware 150 x 150mm size square mould type ‘S’ or ‘P’ PCC for bed, trap and surrounds shall be (1:3:6) type C1 using graded stone aggregate including grating of cast iron complete all as specified and as directed.
-
-
-
S&F flush shutter 35mm thick solid core construction with block board core and plywood face panels commercial type on both sides with lipping / frame to match complete all as specified and as directed.
2
-
-
S&F Vitreous China wash down water closet' constellation premium Cat NO 20089(S-10) of Hindware white colour complete set including cistern with lid cover Hindware Cat Part No 21038, including connection to wate pipe, flushing pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and as directed.
3
-
-
S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.
2
-
-
S&F 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and as directed.
-
-
-
S&F 150 mm long anodised aluminium handle, cast type complete all as specified and as directed.
-
-
-
S&F 300 mm long mild steel sliding door bolt, bolt type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts complete all as specified and as directed.
5
-
-
Demolition of PCC /cast in situ terrazo in ground floor and pavings n exc 15 cm thickness (below of above ground level) includinf removing the rubbish outside MOD Land complete all as specified and as directed.
-
-
-
Demolition of Reinforced cement concrete (reinforced cut as required to facilitate demolition) in floors / pavings, (below or above ground level) and of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
1.5
-
-
M&L for cutting into existing manholes for connecting new drains, internal dia of pipe 150 mm, making good to pipe and rendering, cutting out existing benching for and foring branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 tye B-1 smooth finished, and re-forming benching as required etc complete all as specified and as directed
-
-
-
Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each and complete all as specified and as directed
1
-
-
M&L for preparation of new surfaces of wood and wood based materials of any description, not otherwise described over 10cm width or girth and treated with two coats of synthetic enamel paint over a coat pink primer complete all as directed.
-
-
-
S&F Hand Health Faucet with 8 mm dia tube & wall hook complete all as directed of Jaquar make Cat. No. ALD577 or equivalent.
1
-
-
S&F pressed steel frames for door of profile 125x60mm with one or more rebate incl necessary fixing lugs hinges lock strike plate etc complete incl one soap coat of priming and threshold of 12 mm dia round bar 1 No welded at bottom of frame complete all as specified and as directed.
-
-
-
M&L for Cement concrete (1:3:6) type C0 (using 12.5 graded crushed stone aggregate) as in filling of pressed steel door frame and hold fast blocks etc complete all as specified and as directed.
-
-
-
Cutting hole in brick wall built in cement mortar exceeding half brick but not exceeding one brick and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B1 complete all as specified and as directed.
6
-
-
S&F block board 18/19 mm thick, grade 2 quality, interior grade, commercial type fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) all around, complete all as specified and as directed.
10
-
-
M&L for decorative laminate 0.90 mm thick type 1 surface finish, colour and pattern as approved, fixed with approved adhessive as per manufacturers instructions complete all as specified and as directed.
10
-
-
M&L for ply wood, 6 mm thick, 7 No of ply, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed.
-
-
-
S&F plain fillets square, rectangular or triangular in section, 2nd class hardwood of sectional area exc 13 & n exc 25 sqcm, clean sawn, wrought finished secured with screws complete all as directed.
-
-
-
S&F stainless steel spring loaded cabinet hinges suitable for 19 mm thick shutter Make Ozone or equivalent approved complete all as specified and as directed.
6
-
-
S&F 100 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and as directed.
-
-
-
M&L second class hard wood wrought as in scantling framed complete all as specified and as directed.
-
-
-
S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.
-
-
-
S&F Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded coloured PVC ’C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of single side prelaminated PVC sheet to be fitted in the MS frame welded/ sealed into the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specification complete all as specified and as directed.
4
-
-
S&F Factory made PVC solid door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of 5 mm thick plain colour PVC sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided throughout the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical member & minimum 02 Nos. for horizontal member), complete all as specified and as directed.
10
-
-
S&F Vitreous China urinals, flat back large pastal colour Make : Hindware Cat part No 60002 complete including spreader and providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed.
1
-
-
Forming jambs etc to opening incl cutting, toothing and properly bonding into old work, also facing and matching existing work in CM 1:4 complete all as specified and as directed.
2
-
-
M&L for powder coated (thickness of powder coating not less than 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates with and including weight of joining cleat for fixing etc complete all as specified and as directed
20
-
-
M&L for powder coated (thickness of powder coating not less than 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m with and including necessary joining aluminium cleats, aluminium glazing clips, ruber neoprene packing suitable size of aluminium, handles 2 Nos in each door, stainless steel hinges anodised aluminium snap beading secrews etc complete all as specified and as directed. Note: Glass pane and particle board shall be measured and paid separately.
3
-
-
M&L for 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.
2
-
-
M&L for 5.5mm thick sheet glass, selected quality and glazing with aluminium beading in square exc 0.5 sqm. in each pane fixed to aluminium frame work with and including necessary provision of glazing clips, rubber packing / gasket, screw etc complete all as specified and as directed.
2
-
-
S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.
2
-
-
S&F brass mortice lock, vertical type, size 100 mm 4 lever of approved make complete all as specified and as directed.
2
-
-
Excavation over area n exc 1.50 m deep and getting out in hrad rock complete all as specified and as directed.
15
-
-
M&L for RCC (1:2:4) type B1 (using 20 mm graded crushed stone aggts) as in foundation incl raft, footing, foundation beams, plinth beams, bases for columns etc basement slab and mass concrete, etc complete all as specified and as directed.
12
-
-
M&L for hot dipped galvanised tube members as per IS 4759-1968, IS 1161-1998 and US 4736 as in aerial mast, tower and like structure incl caps, bases splices etc complete. (As per Sketch att) (Height of tower = 40.00 M from GL) with the following creteria:- (a) Height of the mast: 40 Mtrs (b) Bottom width of the mast: 1.50 mtr (c) Top width of the mast: 0.51 mtr (d) Cross section of then tower: Traingular (e) Type of tower : Ground based- Traingular Tubular Tower. (f) All leg member shall confirm to MS grade pipes as per IS: 1161. (g) Basic wind speed - 120 KMPH (h) Exposer Category- Cat -2 class - B (Open Terrain) (j) Topography Category -1 (Flat) (k) Design code IS 875-1987 (part -iii) for loading tower.
3500
-
-
Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundations etc or manholes, cesspits etc. not exc 10 Sqm on plan and getting out in hard rock complete all as specified and as directed. Note: Stones obtained from excavation shall be the prorperty of Govt and sold to contractor as schedule of credit also good soil required for returning filling in shall provide by the contractor from out side MoD land without extra cost to Deptt.
-
-
-
M&L for brick work using sub class ‘B’ bricks built in cement mortar 1:4 straight or curved on plan to any radius as in half brick thick walls complete all as specified and as directed.
12
-
-
M&L for providing cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5M clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including form work complete all as specified and directed.
-
-
-
Surface excavtion n exc (not exceeding) 30 cm deep and averaging 15 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and as directed.
-
-
-
M&L for providing reinforced cement concrete (M-25) Design Mix (using 20 mm graded crushed stone aggregates) as in foundations including rafts, column footings, plinth beams, etc complete all as specified and as directed
6
-
-
M&L for providing reinforced cement concrete (M-25) Design Mix (using 20 mm graded crushed stone aggregates) as in Slabs supported on walls, beams and columns in floors, roofs etc complete all as specified and as directed
7
-
-
M&L for providing reinforced cement concrete (M-25) Design Mix (using 20 mm graded crushed stone aggregates) as in columns, pillars, piers, posts and struts etc complete all as specified and as directed
5
-
-
M&L for providing reinforced cement concrete (M-25) Design Mix (using 20 mm graded crushed stone aggregates) as in Beams, cantilevers, bressummers, lintel over 1.5 span complete all as specified and as directed
5
-
-
M&L for providing reinforced cement concrete (M-25) Design Mix (using 20 mm graded crushed stone aggregates) as in chajjas complete all as specified and as directed
1
-
-
Use and waste of form work to chullah hoods, chajjas trough and similar items incl edges complete all as specified and directed by Engineer in charge.
5
-
-
Use and waste of form work to sides and soffits of floor or roof beams, beam haunchings, girders bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc complete all as specified and directed by Engineer in charge.
75
-
-
Use and waste of form work to sides of conc foundations, footing, bases of columns, raft beams, sides and soffits of plinth beams and similiar works etc complete all as specified and directed by Engineer in charge.
50
-
-
Use & waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floors and roofs and sides of RCC/ PCC bends in walls, horizontal or sloping and similar work exceeding 5cm but n exc 10cm wide for fair finished surfaces complete all as specified and as directed by Engineer in Charge.
10
-
-
M&L for providing cement plaster 15 mm thick in cement mortar 1:4 using water proofing compound as in bearing plaster under RCC slabs complete all as specified and as directed by Engineer in Charge.
20
-
-
S&F mild steel TMT bars 6 to 8mm dia and over cut to length bent to shape required cranking, bending spirally for hooping for columns hooking ends and bindings with and including mild steel wire (Annealed) not less than 0.9mm dia or securing with clips quality confirming to complete all as specified and as directed.
300
-
-
Ditto all as per above item but 6 mm dia and over up to 10mm dia as in stirrups
500
-
-
M&L for rendering 15mm thick in cement mortar 1:3 using WPC applied on concrete roof slab immediately after the slab is laid and finishing even and smooth without using extra cement complete all as specified and as directed.
35
-
-
Supply only water proofing compound complete all as specified and as directed.
1.5
-
-
S&F Aluminium alloy anodized sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.
3
-
-
S&F Door closer hydraulically regulated designation No. 3 universal type cast iron body suitable for door shutters 850mm to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed.
2
-
-
S&F Aluminium anodized door stopper twin legged with rubber shoe and fixed 75mm size complete all as specified and as directed.
2
-
-
M&L for machine cut Kota stone slab flooring 20 mm thick in slabs of size as approved by GE over 20mm thick cement screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed.
12.96
-
-
Ditto all as per above item but as in skirtings etc laid over 10mm thick rendering in CM 1:4
1.45
-
-
M&L for First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and laid over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and as directed.
10
-
-
M&L for rendreing 15 mm thick in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
100
-
-
M&L for rendring 10 mm thick in cement mortar 1:4 as on ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed .
40
-
-
M&L for Machine cut Granite stone slab 20-25mm thick black fixed on shelves top over 20mm thick cement screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed
5
-
-
S&F Rotational moulded polyethylene water storage tanks 1000 Litres capacity (cylindrical vertical with closed top), triple layer hoisted and fixed in position complete all as specified and as directed
2
-
-
S&F stop valves cast copper alloy fancy type 20 mm dia screwed down, screwed both ends for iron pipes or for unions and fixed complete all as specified and as directed .
-
-
-
Ditto all as per above item but 15mm bore concealed type.
2
-
-
S&F brass chromium plated shower rose 125mm size swivel type complete all as specified and as directed .
1
-
-
S&F bib taps cast copper alloy 15mm size chromium plated fancy type with crutch or butterfly handle screwed down , screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed .
2
-
-
S&F wash hand basins vitreous china flat back 550x400mm size white including CP waste grating 32mm size, PVC waste pipe 25mm bore heavy duty, chain and plug and porcelain stopper , brackets of MS angle 35x35x6mm size complete all as specified & as directed.
Note: Pillar tap shall be measured and paid for separately
1
-
-
S&F wash down water closet squatt pan ‘Orissa Pattern’ white 580 x 440 mm size incl integral foot rest , PVC Flushing cistern 10 Liters capacity low level as specified, PVC waste pipe suitable to joint flushing cistern to water closet fixed on existing P or S trap complete all as specified and as directed.
1
-
-
S&F Wash down water closet pan (pedestal pattern) white incl, PVC Flushing cistern 10 Liters capacity low level as specified, PVC waste pipe suitable to joint flushing cistern to water closet fixed on existing P or S trap complete all as specified and as directed.
1
-
-
S&F Cast iron floor trap 75 mm bore including 100 mm round CP brass round grating including jointing to waste pipe in run lead and set in cement concrete (1:2:4) Type B1 complete all as specified and as directed.
2
-
-
S&F Cast iron soil waste and vent pipes 75mm bore size sand cast in any length with or without ears with cement joints laid in floors complete all as specified and as directed.
10
-
-
S&F Cast iron soil waste and vent pipes 50mm bore size sand cast in any length with or without ears with cement joints fixed to walls complete all as specified and as directed.
5
-
-
S&F Cast iron branch piece 100 mm bore size with oval access door single ( equal or un equal ) ordinary or inverted ( spigot or socket type) or with parallel branches complete all as specified and as directed.
1
-
-
S&F Cast iron bends any radius 100mm bore size with Ducks foot or heel rest complete all as specified and as directed.
1
-
-
S&F Cast iron bends any radius 75mm bore size with Ducks foot or heel rest complete all as specified and as directed.
1
-
-
S&F Cast iron bends any radius, diminishing pieces or tapers 75mm bore size complete all as specified and as directed.
1
-
-
Ditto all as per above item but with oval access door
1
-
-
S&F Cast iron cowls 50mm size complete all as specified and as directed.
1
-
-
M&L for extra over cast iron pipes and fittings if lead joint is provided in lieu of cement joints , size of pipe 100mm complete all as specified and as directed.
2
-
-
M&L for extra over cast iron pipes and fittings if lead joint is provided in lieu of cement joints , size of pipe 75mm complete all as specified and as directed.
2
-
-
S&F Prelaminated particle board 12mm thick exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws as in pelmet boxes incl fixing arrangement complete all as specified and as directed.
5
-
-
S&F Venetian blinds with 100mm wide flaps of approved shade vertical type having tilting and sliding arrangement by means of nylon threads made to size fixed with aluminium channel powder coated and MS clamps or as per manufacturers instructions complete all as specified and as directed.
10
-
-
M&L for Preparation of new plastered surfaces and applying two coats of white lime washing on ceiling surfaces complete all as specified and as directed.
34
-
-
M&L for preparation of new plastered surfaces and applying two coats of white lime washing on walls complete all as specified and as directed.
10
-
-
M&L for preparation of new plastered surfaces and applying two coats of oil emulsion distemper on walls including chalk whitening preparatory to distempering and a priming coat of alkali resistant primer complete all as specified and as directed.
100
-
-
S&F aluminium anodized door frame and fully glazed shutter single leaf divided in to two glazed panels including aluminium anodized snap beading and rubber gasket / lining for fixing of glass as directed. The frame shall be fixed with aluminium anodized bolt by drilling in the existing wall and with thrust bolt of suitable size all as directed. The frame and shutter will be made out of the following sections and fittings: (a) Aluminium anodized door frame 100mmx44mmx1.6mm fixed with aluminium board and thurst bolt in walls by drilling as directedAluminium anodized top, sides and lock rails of shutter section 81mmx44mmx1.6mm(b) Aluminium anodized bottom rail of shutter section 112mmx44mmx1.6mm(c) Brass six lever dead lock suitable for aluminium doors manufactured by Harrison Locks or Godrej as approved – 01 No for each door(d) Aluminium anodized tower bolt 200mmlong size Make Classic or Argent – 02 No in each door(e) Aluminium anodized fancy handle 250mm long Make Classic or Argent – 02 No in each door(f) Glass pane shall be 5.5mm thick tinted glass of size as required(g) Floor spring hydraulic heavy duty and pivot arm Make Everite/ Sandhu – 01 No for each door
2
-
-
Ditto all as per above item but with double leaf.
2
-
-
Aluminium anodized window frame 100mmx44mmx1.6mm fixed with aluminium board and thurst bolt in walls by drilling as directed.(a) Aluminium anodized window shutter styles and rails 44mmx44mmx1.6mm(b) Aluminium anodized butt hinges 04 Nos in each window 75mm long ISI marked (c) Aluminium anodized tower bolt 200mmlong size Make Classic or Argent – 02 No in each shutter (d) Aluminium anodized cast type handles Make Classic or Argent – 01 No in each shutter(e) Aluminium anodized hook and eye 150mm long 01 no for each shutter Glass pane shall be 5.5mm thick tinted glass of size as required
8.6
-
-
S&F aluminium anodized fixed partition fully glazed divided in to glazed panels not exceeding 900mm centers both ways including aluminium anodized snap beading and rubber gasket / lining for fixing of glass as directed. The frame shall be fixed with aluminium anodized bolt by drilling in the existing wall and floor with thrust bolt of suitable size all as directed. The frame of partition will be made out of the following sections and fittings: (a)Aluminium anodized frame 63mmx38mmx1.6mm fixed with aluminium board and thurst bolt in walls by drilling as directed. (b) Panels shall be of 12mm thick pre laminated particle board both side decorative Make Novopan/ Kitlam/ Bhutan Board
2
-
-
Material and labour for PCC (1:3:6) (20mm graded aggregate 75mm thick as in plinth protection surface finished even and fair without using extra cement including joints filled with bitumen mastic complete all as specified and as directed.
18
-
-
M&L for preparation and cleaned to plastered/concrete surfaces of roof applying the under mentioned course of roof treatment as given below :- (a) Applying evenly compactible primer @ 0.4 litre per Sqmtr over concrete/plastered roof surfaces.(b) Applying a tack coat of industrial bitumen @ 85/25 grade (ISI marked) @ 1.2 kg/Sqmtr.(c) Laying of membrane sheet of weight not less than 3.6 kg/Sq.mtr with minimum longitudinal end over laps of 100mm and horizontal side laps of 75mm and joints finally thermo-fused with help of LPG flames. Membrane sheet laid over a tack of industrial bitumen 85/25 as specified here-in before. Note : -- (i) Membrane sheet also laid along the parapet upto 30cm height & inserted inside the groove & laid over a coat of bitumen as specified here-in-before.The groove shall be closed with CM (1:3 ) mortar Nothing extra shall be admissible on this account (ii) WPC shall be measured & paid under pecified item of this Schedule. Nothing shall be entertained on this account. (iii) Contractor shall submit guarantee for 10 years from the date of completion of work. (iv) The amount against guarantee period for roof treatment shall be retained from the contractor due’s or contractor may furnish a fixed deposit receipt in favour of GE as issued by Nationalize Bank. (v) Amount of security deposit against the guarantee period for roof treatment shall be calculated as per the scales laid down for calculating Individual Security from total amount of roof treatment.
40
-
-
M&L for 100 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded crushed stone aggregates) as in sub base of flooring etccomplete all as specified and as directed.
-
-
-
S&F false ceiling with exposed GI system using “SILHOUETTE XL 15 mm (Nominal) designer Grid "Armstrong" white or Global white with black reveal and 600 x 600 x 15 mm thick prime fine fissured micro look white/coloured tiles (superfine 15mm/silhouette). Making necessary framework for AC ducting, if any and necessary cutouts for diffusers and light fittings, taping and finishing to proper line & level complete all as per manufacturer’s instructions and as directed.
21
-
-
Supply & fixing prelaminated particle board 18/19 mm thick, exterior grade with one side decorative choice lamination and other side balancing white lamination fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) all around complete all as specified and as directed.
5
-
-
Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; and similar work conforming to Fe-290 Gde-E-165, complete all as specified.
80
-
-
S&F Continuous (piano) hinges with width of flap 30 mm mild steel, bright finish or electro galvanised complete all as specified and as directed.
5
-
-
S&F brass type handles 100 mm size cast type polished bright complete all as specified and as directed.
8
-
-
S&F brass 4 lever lock, cupboard grade I size 75 mm complete all as specified and as directed.
4
-
-
M&L for vitrified ceramic tiles double charged 10 mm thick (square/rectangular) area of each tile exceeding 0.36 Sqm but not exceeding 0.42 sqm in floor etc,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick cement screed bed in CM 1:4 complete all as specified and as directed.
11
-
-
Ditto all as per above item but in skirting/risers/dados etc.over and including 10 mm thick rendering in CM 1:3 complete all as specified and as directed
1.5
-
-
M&L for PVC tiles/sheets, 2 mm thick plain coloured as approved and laid with approved synthetic adhesive in floors complete all as specified.
11
-
-
Ditto all as per above item but in vertical surfaces ditto
1.5
-
-
M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified.
7.5
-
-
Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundations etc or manholes, cesspits etc. not exc 10 Sqm on plan and getting out in soft/disintegrated rock complete all as specified and as directed.
-
-
-
S&F galvanised steel water tubing 20mm bore medium grade with all fittings laid in trenches complete all as specified and as directed.
40
-
-
Cutting existing steel tubing of size 40 or 50 mm bore of pipes alterations or additions (Each cut measured) complete all as specified and as directed.
8
-
-
Screwing existing steel tubing sizes 40 or 50 mm bore of pipes for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified and as directed.
2
-
-
Screwing existing steel tubing size 20 mm bore of pipes for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified and as directed.
1
-
-
M&L for salt glazed stoneware drain pipes 150mm size laid in trenches and jointed as specified complete all as specified and as directed.
20
-
-
M&L for cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in concrete bed to drain pipes including packing under, and haunching against the sides of pipes 150mm bore size after they are laid and tested complete all as specified and as directed.
75
-
-
M&L for precast RCC (1:2:4) type B1 using (20mm graded crushed stone aggregate) set in CM (1:4) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed.
0.98
-
-
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.
7
-
-
M&L for reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and as directed.
62
-
-
E/M Works
M&L for bricks common burnt clay building bricks, sub-class ‘B’ designation 75 old size bricks for the protection for underground cable complete all as specified & as directed.
0.6
-
-
S&F sheet metal enclosure double door suitable for distribution boards when MCBs to be used having 200Amp rated bus bar 4 ways single pole and neutral 240 V complete all as specified and as directed. Make-SIEMENS, SCHNEIDER, LEGRAND, ABB
1
-
-
S&F MCB single pole 6 to 32 Amps 240 V,10KA, 'B' series,complete all as specified and as directed with copper lugs. MAKE-SIEMENS, SCHNEIDER, LEGRAND, ABB
-
-
-
S&F MCB single pole and neutral 40 Amp 240 V ,10KA, 'C' series, complete all as specified and as directed with copper lugs. MAKE-SIEMENS, SCHNEIDER, LEGRAND, ABB
1
-
-
S&F 20W LED tube light fitting 1x20 Watts having CCT 5700 K,220 to 240 volts with polycarbonate /extruded aluminium alloy/ powdwer coated CRCA sheet housing,bipin holder connector block etc complete withall accessories internally prewired and including connecting up with twin core twisted flexible conductor cable of suitable size all as specified and as directed. MAKE-HAVELLS (Cat part- LUMILINEBS20WLED865SPCWH), CROMPTON GREAVES, OSRAM and its equivalent model.
-
-
-
S&F LED 5 Watt Aesthetically designed linear mirror light.Provided with a high output PMMA diffuser for glare free light Dimension: 1ft MAKE-Wipro, PHILIPS, CROMPTON GREAVES, HAVELLS, OSRAM
1
-
-
S&F in replacement of sub main wiring with PVC insulated, FRLSH (Fire Retardant Low Smoke and Low Halogen), unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 4.0 sqmm (Nominal area) drawn into new conduit of any size and type / casing-caping with and including one run of 4 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green coour as continuous earth wire including lugs etc connected and tested complete all as specified and as directed.
Note: (i) New conduit/ casing- caping and accessories shall be measured separately. (ii) Three runs of 4.0 sqmm cable conductor and one run of PVC pipe shall be a unit length. MAKE -Finolex, Polycab, RR Cable, Havells or equivalent make.
-
-
-
S&F Regid non-metallic PVC conduit 25 mm (external dia) ISI marked (on surface) incl of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers, lock nuts, saddles, pipe hook etc complete all as specified and as directed. MAKE -Finolex, Plaza, Kalinga Premium.
6
-
-
M&L for concealed one light / fan point wiring complete with PVC insulated and unsheathed FRLSH (Fire Retardant Low Smoke and Low Halogen) cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, with strandeard modular boxes (not less than 1.6 mm thick) , modular plate and modular frame for any no of module of approved make and colour including 1.5 sqmm multi stranded copper conductorcable of green colour as continuous earth wire with lugs and accesseries complete all as specified and as directed for the followings :- MAKE -FINOLEX, POLYCAB, RR CABLE, HAVELLS
-
-
-
Ditto all as per above item but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, FRLSH (Fire Retardant Low Smoke and Low Halogen) , cable for 1 5 Amp socket outlet on independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and as directed. MAKE -FINOLEX, POLYCAB, RR CABLE, HAVELLS, PLAZA
-
-
-
S&F modular switch 1 Way 10 Amp , with modular metal Box & modular cover plate with frame complete all as specified and as directed. Make CRABTREE, LEGRAND, SEIMENS, ABB, PLAZA
3
-
-
S&F Modular socket 2 in 1, 3 pin, 6Amp with modular metal Box & modular cover plate with frame complete all as specified and as directed. Make:-CRABTREE, LEGRAND, SEIMENS, ABB, PLAZA
-
-
-
S&F modular switch 1 Way 16Amp , with modular metal Box & modular cover plate with frame complete all as specified and as directed. Make:- CRABTREE, LEGRAND, SEIMENS, ABB, PLAZA
-
-
-
S&F Modular Ceiling Rose 5" X 5"three terminals complete all as specified and as directed. MAKE-CRABTREE, LEGRAND, SEIMENS, ABB, PLAZA
-
-
-
Supply, Installation, Testing and commissioning of Early Streamer Emission (ESE) type advanced lightning Protection air terminal which should comply NFC-17-102 : 2011 standards. The air terminal shall be capable to collect the ambient electric field and should emit the upward streamer with the defined gain in time 60 micro second model to be selected level 1. Maximum radius of protection 79m all around its zone. The device shall be mounted atleast 1.5m clear to the highest point of the mast. Make- EUROSTARES / DUVAL MESSIEN/ CIRPROTECH/ABB or any other company importing/ manufacturing in accordance and confirm with NFC-17-102.
1
-
-
Item No. 186.00 contd...
(A) The lightning Protection system with level 1 protection 79m, level 2 protection 97m, level 3 protection 107m, It should be self powered by battery.
(B) The installed equipment should work in chlorinated environment, high humidity climate foggy weather or exposed industrial sites (C) It should have built in sensor which can detect lightning in advance in clouding its polarity positive (+)or negative (-)and sutably change tip-polarity in micro-second.
(D) It should have BITE facility for monitoring and transmitting its health condition.
(E) Active lightning arrestor should have a provision to test it remotely via radio signal for this it should have a provision to test it remotely via radio signal. For this it should have an on board transmitter using a standard frequency and transmitting a signal periodically in order to confirm correct operation of lightning conductors electronics including polarization of its tip
(F) Test joint : Down part of Each conductor must be equipped with test joints, a protective sheath eventually a lightning strike counter
Warranty :- Active Lightning arrestor should have min five years of warranty from the date of commissioning of equipment at unit.
-
-
-
Supplying and fixing down conductor (02 Nos) 70 Sqmm single core insulated stranded copper cable with necessary clamping accessories of approved make complete all as specified & as directed.
90
-
-
Supply, Installation, Testing and commissioning CPRI Tested with lithium battery Flash counter (resettable type) LCD Display of 03 digits with IP 67ABS enclosure complete all as specified & as directed.
1
-
-
Supply, install testing and commisioning of maintenance free chemical earthing system conforming to IS: 3043 . New chemical earthing using 77mm dia 3000mm long copper rod with chemical material. The quantity of ground enhancing compound shall not be less than 45 Kg per pit. The electrode shall be provided on its top with an earth termination clamp made out of electrolytic grade copper for connecting earth continuity conductor with stainless steel hard ware. PCC chamber of size 300x300x300 mm with cover shall be provided on the top of the earth system on 100 mm thick PCC 1:3:6 bed concrete . The chamber shall burried in ground with top edge projecting upto 75 mm from ground surface. Note:- i) THe quoted rate shall be deemed to include cost of copper strip 32mm x 6 mm upto 7.5 m length. ii) The earth resistance shall not be more than ONE Ohm . The contractor shall give a written guarantee for maintaining earth resistance of less than ONE Ohm for a period of 5 years from the certified date of completion and to arrange security deposit of Rs 5000 each per earthing for five years. The fault current should not be less then 35KA, in this regard CPRI/ERDA/NABL Approved LAB Test REPORT is Mendatory. MAKE- ELANCRETE/VASCONITE/.
6
-
-
Item No. 189.00 contd...
Notes:-
(i) The quoted rate shall be deemed to include cost of copper strip 32mm x 6 mm upto 7.5 m length. (ii) The earth resistance shall not be more than ONE Ohm . (iii) Earth enhancing material : should have the following features :-
(a) Ultra low resistivity of 0.001 ohm-m (b) PH should be neutral range (7+1)
(c) Should be RoHS complaint
(d) Should create homogeneous mass with Portland cement to form concrete mix required for embedding of conductor.
(e) Should be remaining effective for a very long period of 50 years even in the dry /rock/sandy soil with out the need of any watering, recharge or maintenance.
(f) Should not corrode the embedded metal conductor of the electrode.
-
-
-
M&L for (auguring) boring of holes under road pavements hard standing by trenchless technology upto 50cm below ground level for inserting 50mm dia light grade GI Tubing for laying of earth continuity conductor and refilling with PCC/black bitumin and leveling with existing surface complete all as specified & as directed.
10
-
-
S&F GI tube light grade 50 mm bore with all fitting laid in trenches/wall/floor/on pole complete all as specified & as directed.
10
-
-
XLPE armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 SQMM 2 CORE complete all as specified & as directed
100
-
-
Supply, Installation, Testing and commissioning solar aviation obstruction LED light 10 Watt compatable for dual power.
Illumination
Lux 32 Lux
Optical lens arrangement to provide 360 illumination by high intensity Red LEDs.
Special design for over 10 year life.
Long life LED @100000 Hours (12 Hr/Day=22 Yrs).
Electronic Design
Input voltage : Solar panel 12 VDC.
Power consumption : 4 Watt
LED : 30 Nos. are used in 6 circuit parallel.
Battery 12Volt 4.5 Ah Li-ion Long life.
Current through LEDs under all conditions 20mA + 20%.
Voltage across LEDs under all conditions 2V + 10%.
Operating temperature range : -10 degree C to 60 degree C.
Photocell auto On/Off (Internal fitted) No extra Cost.
Mechanical Design
Sealed Water- proof unit conforming to IP - 55 standards.
Casing made of S.S painted with UV paint for atmospheric protection.
UV stablized polycarbonate lens to protect the LEDs.
Bird- Spike to keep away the droppings.
Fire retardant.
Withstands impact of up to 5J
Warrenty :- 02 Years
1
-
-
M&L for concealed point wiring complete with PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, with MS terminal boxes (not less than 1.6 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs and accesseries complete all as specified and as directed for the followings :-
-
-
-
One 3 pin socket outlet, 5 amps on independen board.
3
-
-
S&F Modular switch 1 way 6A, 1 module one way, ISI Marked complete all as specified and as directed. Make:- Anchor/Havells or equivalent make.
14
-
-
S&F Socket 6A/16A - 2/3 pin combined 2 module type, ISI Marked complete all as specified and as directed. Make:- Anchor/Havells or equivalent make.
5
-
-
S&F 1'x1' ceiling fitting with Ultra modern designed architectural 1'x1' 15W LED luminaire which Provides soft light and glare free symmetrical illumination suitable for Armstrong /Grid ceiling. integtated elecronic driver etc,complete with all accessories internally pre wired and including connecting up with twincore twisted flexible copper conductor cable with suitable size.complete all as specified and as directed. Make :- Havells (Cat Part No 15W 840 1x1) or equivalent in PHILIPS, Crompton Greaves.
4
-
-
S&F sheet metal enclosure double door suitable for distribution boards when MCBs to be used having 100Amp rated bus bar Triple pole and neutral 4 ways 415 V complete all as specified and as directed.
1
-
-
Supply and fix Tripple pole MCB 32A, 10KA, 'C' series complete all as directed. Make- Schneider (Cat part-SE-A9F74332), Havells, Legrand
2
-
-
S&F Triple pole and earth sheet metal encolsure double door fixed to wall/screwed to the free space on existing L T Panel /fixed in the dummy space of existing DB/pillar box complete all as directed. Make- Havells
1
-
-
Supply and fix ceiling Fan with double ball bearing 1200 mm sweep complete with capicitor, 300mm down rod, canopies, three blade,made of aluminium alloy, 230 Volts 50 HZ confirming to IS 374/1976, of 5 Star rating complete all as specified and as directed. Make -crompton greaves (Cat part- Flyleaf), philips, USHA, ORIENT.
1
-
-
Supply and fix Exhaust Fan heavy duty 300 mm dia 1400 RPM for office use, dynamically balance blade, epoxy powder coated confirming to IS 2312-1967 with ISI Marked IP-55 with class B insulation motor including louvers shutter Noise level dB 50-55 complete all as specified and as directed Make -crompton greaves (Cat part- EXHD300-4-1), USHA, Khetan.
1
-
-
Earthing complete with galvanisedsteel earth plate electrode 60×60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.
Note- Quoted price included of PCC pit chamber, RCC pit cover, Funnel with wire mesh and 20mm GI pipe (Not less than 7m) for protection of lead wire.
2
-
-
Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating invertor AC with EER 3.2.of capacity 1.5 TR. Make- Hitachi, LG, Voltas, Blue Star or equivalent make.
1
-
-
Supply and fix Voltage stabilizer for automatic operation with digital display, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 3.0 KVA. Make- V-Guard (Cat part- VGM 500 DIGITAL), Voltas or equivalent make.
1
-
-
S&F SP&N enclosure with 2 pole and Earth Metal Plug & Socket complete with one single pole C series MCB of 20 Amps rating 20A SP MCB single phase 240 v complete for AC all as specified and directed of make :- havels (Cat part- DHDPUSN020 / DHDPUDP020), standard or equvalent approved make.
1
-
-
Supply and lay in treches for fixed Wall/floor or passing through ducts GI tubing light grade of sizes 40mm for protection of UG cable with necessary fittings all as specified as directed.
22
-
-
M&L for carrying out horizontal boring below roads/PCC hard standing/Drain suitable Up to 50mm dia GI pipe all as specified as directed for inserting GI pipe of the following sze with a depth upto 1.5m & length of road upto 12m of the follwing size of bore.
16
-
-
Supply and spread clean rever sand in trenches above and below underground cable all as specified and as directed.
Note: Punned down thickness shall be measured.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements