Delhi Transport Infrastructure Development Corporation Limited Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Costs
EMD
₹ 12,22,286Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_DTIDC_179416_1Bid Award Id
ViewTender No
29/2019-20Tender Authority
Delhi Transport Infrastructure Development Corporation Limited ViewPurchaser Address
-Website
http://https://dtidc.co.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
b) 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire(DSR-2016 Item No. 1.7.7)
500
156000
312
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required(DSR-2016 Item No. 1.31).
30
9390
313
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required(DSR-2016 Item No. 1.32).
50
20300
406
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 Nos. 3 pin 5/6 A modular socket outlet and 2 Nos. 5/ 6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings) (DSR-2016 Item No. 1.5.6).
90
45360
504
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required(DSR-2016 Item No. 1.24) . a) Telephone socket outlet (DSR-2016 Item No. 1.24.6).
2
192
96
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required(DSR-2016 Item No. 1.27).a) 1 or 2 Module (75 mmX75 mm) (DSR-2016 Item No. 1.27.1).
2
350
175
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required(DSR-2016 Item No. 1.18).a) 2 Pair(DSR-2016 Item No. 1.18.2).
150
2850
19
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required(DSR-2016 Item No. 1.53).a) 1 run of cable(DSR-2016 Item No. 1.53.1).
500
17000
34
b) 3 run of cable(DSR-2016 Item No. 1.53.3).
1000
84000
84
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required(DSR-2016 Item No. 1.20).a) 20 mm(DSR-2016 Item No. 1.20.1).
600
75600
126
b) 25 mm(DSR-2016 Item No. 1.20.2).
2000
294000
147
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required(DSR-2016 Item No. 1.26)).
50
1200
24
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required(DSR-2016 Item No. 1.25).
20
5760
288
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required(DSR-2016 Item No. 1.44).
90
9450
105
Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 kV grade as required(DSR-2016 Item No. 9.1).a) 2 X 6 sq. mm (19mm) (DSR-2016 Item No. 9.1.1).
6
942
157
b) 4 X 10 sq. mm (25 mm) (DSR-2016 Item No. 9.1.32).
6
1218
203
c) 3½ X 70 sq. mm (38mm) (DSR-2016 Item No. 9.1.23).
8
3152
394
d) 3½ X 300 sq. mm (70 mm) (DSR-2016 Item No. 9.1.30).
4
4424
1106
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required(DSR-2016 Item No. 14.16).a) 90 mm dia (OD-90 mm & ID-76 mm nominal) (DSR-2016 Item No. 14.16). (DSR-2016 Item No. 14.16.2).
800
85600
107
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) (DSR-2016 Item No. 2.4).a) 4 way (4 + 12), Double door(DSR-2016 Item No. 2.4.1).
2
4396
2198
b) 6 way (4 + 18), Double door(DSR-2016 Item No. 2.4.2).
2
5318
2659
Supply and fixing of following ways surface/recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200A, tinned copper bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required). (DSR-2016 Item No. 2.5). a) 4 way (4+12), Double door(DSR-2016 Item No. 2.5.1).
2
9004
4502
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required(DSR-2016 Item No. 2.10).a) Single pole(DSR-2016 Item No. 2.10.1).
90
15570
173
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required (DSR-2016 Item No. 2.13).a) 63A(DSR-2016 Item No. 2.13.2).
4
2712
678
Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required(DSR-2016 Item No. 2.15).a) 63A(DSR-2016 Item No. 2.15.3).
4
9208
2302
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (DSR-2016 Item No. 2.3).a) 16 way, Double door(DSR-2016 Item No. 2.3.4).
2
2728
1364
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required(DSR-2016 Item No. 2.12).a) 40A(DSR-2016 Item No. 2.12.1).
2
444
222
Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required(DSR-2016 Item No. 1.57).
5
2665
533
Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A, “C” curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required(DSR-2016 Item No. 2.20).
6
14928
2488
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required(DSR-2016 Item No. 5.4).
6
25962
4327
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required(DSR-2016 Item No. 5.15).
90
11610
129
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required(DSR-2016 Item No. 5.18).
2500
57500
23
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required(DSR-2016 Item No. 5.6).
6
49734
8289
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required(DSR-2016 Item No. 5.2).
6
22032
3672
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required(DSR-2016 Item No. 5.14).
60
41880
698
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required(DSR-2016 Item No. 4.1).a) 150 mm width X 50 mm depth X 1.6 mm thickness(DSR-2016 Item No. 4.1.2).
40
15720
393
Supply and fixing modular type information outlet RJ-45, CAT-6 data front modular plate with suitable size metal box on surface or in recess including connections etc. Complete as required.
80
29440
368
Supply, installation, testing and commissioning of 6U Rack with PDU 6 socket, 100" tray (2Nos) & 2 Fan – combo pack, wall mounted rack with lock & key, max loading 60 kg. Cable entry on top and bottom cover, welded frame, material SPCC quality cold rolled sheet, front toughened glass door, turning angle of front door over 180O, powder coated frame and door including necessary arrangement of fixing etc.
2
19548
9774
Supply, installation, testing and commissioning 24 port switches for fast Ethernet storage and fast data transfers plug and play installation switching capacity. 4.8 Gbps switching fabric advanced features. 27.3 BTU/h certifications. 6 watt, Windows, Linux operating system, Model D-Link-DES-1024C
2
14948
7474
Supply, installation, testing and commissioning of recess mounted 2x2 LED Luminaire 36W, having powder coated aluminium housing with driver and in built infrared technology (motion) based PIR automatic sensor with switch, complete with all accessories as required.
65
495560
7624
Supply, installation, testing and commissioning of recess mounted downlighter 18W LED Luminaire having powder coated aluminium housing driver complete with all accessories as required.
95
101175
1065
Supply, installation, testing and commissioning of 30 watt LED floodlight luminaire with high pressure die cast housing with IP65 deg of protection .
10
25250
2525
Supply, installation, testing and commissioning of 18W LED tube light fitting (1200mm length) surface mounted, having powder coated aluminium housing with driver complete with all accessories as required
20
11860
593
Supply of ceiling fan with double ball bearing, high speed motor, blades, down rod, canopies, capacitor etc. suitable for operation on 230 volts, 50 Hz, single phase, AC supply complete as required .a) 1200 mm sweep
35
62370
1782
Supply, installation, testing and commissioning of wall fan 400mm complete with all accessories.
4
10816
2704
Supply, installation, testing and commissioning of exhaust fan 15" complete with gravity loure all accessories as required.
8
12632
1579
Supply, installation, testing and commissioning of 18 Inch industrial air circulator fan. Complete with all accessories as required .
6
31842
5307
Supply, laying and testing commissioning of following sizes of 1.1KV grade multicore copper conductor XLPE insulated and PVC sheathed. FRLS inner sheath, armoured cable, on surface/cable, on surface/cable tray/in pipe/direct in ground including excavation and refilling the trench etc. as per IS 7098.a) 4Cx10sqmm
300
147300
491
b) 2x6sqmm
1300
282100
217
Supply, laying and testing commissioning of following sizes of 1.1KV grade multicore aluminium conductor XLPE insulated and PVC sheathed, FRLS inner sheath, armoured cable, on surface cable tray/in pipe/direct in ground including excavation and refilling the trench etc. as per IS 7098.a) 3.5Cx70sqmm
450
218250
485
b) 3.5Cx300sqmm
50
83850
1677
Supply, installation, testing and commissioning of following VRF Air Conditioning system, with cooling and heating option, suitable for 320 to 460V for outdoor units and 230 ±5% volts for indoor units, complete with indoor and outdoor units, concentrated winding, 100% capacity at 43 deg C, nonstop working for a temperature upto 56 deg C, heath sink for PCB, IPLV – 7, fire alarm system compatibility, remote monitoring system compatibility, tenant billing system compatibility, mobile app compatibility, remote monitoring service, BMs compatibility data concentrator including fully charged with refrigerant R410A.a) 20 HP (cooling/heating) system
4
2143256
535814
a) 1.5 TR high wall/cassette type indoor units
3
64440
21480
b) 2.0 TR high wall/cassette type indoor units
11
255860
23260
c) 2.8 TR cassette type unit
2
85386
42693
d) 4.0 TR cassette type unit
8
350128
43766
e) Codeless remote for indoor unit
24
29304
1221
f) Group controller of entire systems
1
12213
12213
g) Refnets for indoor units (S+R)
24
120504
5021
Supply, installation, testing and commissioning of interconnecting refrigerant pipes of following sizes with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tublar insulation between each set of indoor & outdoor units as per specifications, all piping inside the building shall be properly supported with MS hangera) 41.3 mm OD (insulation 19mm)
15
39585
2639
b) 34.9 mm OD (insulation 19mm)
20
46140
2307
c) 28.58 mm OD (insulation 19mm)
29
60987
2103
d) 22.2mm OD (insulation 19mm)
52
81172
1561
e) 19.05 mm OD (insulation 13mm)
64
84672
1323
f) 15.9mm OD (insulation 13mm)
47
49444
1052
g) 12.7 mm OD (insulation 13mm)
100
74600
746
h) 9.52 mm OD (insulation 13mm)
70
45150
645
j) 6.35 mm OD (insulation 13mm)
50
27150
543
Supply, installation, testing and commissioning of below recess PVC drain piping complete with fittings, supports and insulation as per specifications a) 25 mm dia
40
8160
204
b) 32 mm dia
90
24390
271
Providing & fixing control cum transmission wiring of 2 core x 0.75 sqmm copper in suitable conduits between indoor and outdoor unit
250
51000
204
Supply, installation, testing and commissioning of MS stand for VRF outdoor units
4
42608
10652
Supply, installation, testing and commissioning of additional refrigerant if required.
20
26600
1330
Supply, installation, testing and commissioning of 1.5 ton minimum 4 star window air conditioner, copper coil, including voltage stabilizer, including all accessories etc as required.
1
30064
30064
Supplying, installation, fixing, testing & commissioning of air curtain (CRCA/MS body) superior extra heavy duty motor & blower assembly, necessary electrical and accessories aluminium blower, blower size 8"x8". Air velocity – 18-20mps (Min), size 7"x11"x15", fitted with 0.35 HP two motors of double shaft with four impellers, 1440 rpm, single phase.
2
35282
17641
Main LT Panel
Supply, installation, testing and commissioning of dust-damp and vermin proof free floor standing sheet steel enclosed non-draw out modular type LT main panel, fabricated out of suitable sized angle iron and flats, base channel and covered with 2.0mm thick CRCA sheet, duly painted complete with earth bus, aluminium bus bar, numbering and sign writing space provision for BSES meter, interconnection & including the cost of connection through bus bar/copper conductor flexible connection as per specification mounted with following components (rating-IP-54) Incoming-1
400 A, 415V, 35 KA (Ics=lcu=35 KA for 1 second), 4 pole, microprocessor based release (for over current, short circuit and earth fault protections) MCCB with suitable contractors with all indications, metering, protections, push button etc complete in all respect as mention in specifications and as required. Digital flush type class-I accuracy multifunction dual energy meter 0-800A showing V, A, KWH, KVAR, PF etc with 3 Nos current transformers of 250/5 Amp ration, 15 VA class 1.0 metering
1 set of three phase R,Y,B indicating lamps along with 2A SP MCB backup protection
Control 24 MCB, control terminals & wiring as required 27 undervoltage with definite time relay – 1 No
Incoming-2
Bus Bar
TPN aluminium extensible type main bus bars of minimum of 500 A capacity
Outgoing Following rated 415V, MCCB’s with overcurrent and short circuit releases, all indication front operating handle & door interlock with phase indication lamp etc complete in all respects as mentioned in specifications and as required. For each outgoing i) 100A, 4P, 25KA, DN1, MCCB – 4 No (Microprocessor release)
ii) 63A, 4P, 25KA, MCCB- 8 Nos iii) 63A, DP-4 No
iv) 110A, 3P, 35KA, MCCB manually operated 1 No. For Capacitor Banks.
v) One number binary type power factor sensing and correction relay (6 stages) with digital display, complete with its all accessories etc as required. LT Power factor improving capacitor of indoor type suitable for auto/manual operation on 415 volts AC 3 phase 50 Hz complete with baking arrangement, interconnections with suitable size of copper conductor PVC insulated PVC sheathed unarmoured cable, discharge résistance etc as required i) Bank of 5 KVAr rating with suitable TP contactor, MCB and harmonic reactor – 3 set ii) Bank of 15 KVAr rating with suitable TP contactor, MCB and harmonic reactor – 1 set
iii) Bank of 25 KVAr rating with suitable TP contactor, MCB and harmonic reactor – 2 set
1
679235
679235
Supply, installation, fixing, testing and commissioning of addressable analog plug in type of smoke detectors photoelectric type with optical chamber, red led lamp for indication, complete as per details
40
132720
3318
Supply, installation, fixing, testing and commissioning of response indicator lamp assembly mounted on walls/partitions etc in dust tight enclosures, complete as required
4
576
144
Supply, installation, fixing, testing and commissioning of addressable analog manual call point in ABS plastic body (break glass) to initiate audio visual alarm as per specifications complete.
4
13572
3393
Supply, installation, fixing, testing and commissioning of addressable analog fire alarm hooter having an audible range of 25 meters.
4
15432
3858
Supply, installation, fixing, testing and commissioning of analog addressable type 1 loop automatic main fire alarm control panel annunciation to indicate fire and fault, LCD display, LED lamps for visual indication, audio alarm unit, push buttons for acknowledge, test, reset complete with power supply unit for 24 volt DC from 230 volt AC and backed up in a suitable MS sheet enclosure complete with painting as required as per the specifications.
1
78028
78028
Providing and fixing of water type (Gas cartridge) fire extinguishers, ISI marked (IS: 15876) capacity 9 litres with gun metal cap and nozzle and complete in all respects including initial fill and wall suspension brackets as required as per specifications.
4
11248
2812
Providing and fixing of 6 kg dry powder (Cartridge type) fire extinguisher as per IS: 15876 (ISI marked) including wall suspension brackets as required.
4
13272
3318
Providing and fixing of 4.5 ltr capacity CO2 type fire extinguisher complete as per specification.
4
24036
6009
Providing and fixing of ceiling mounted extinguishers 7.7 kg gross weight, automatic discharge mechanism, helium leak detection, red epoxy powder coating, forging & machining valve, minimum 8 secs discharge time, they detect the rising temperature of the area and activate automatically, ensuring that the fire is brought under control early & efficiently.
5
63100
12620
Supply, installation, testing commissioning of 125 KVA silent DG set out door type comprising of engine coupled to 415V, 125 KVA alternator both mounted on common base frame with other standard accessories i.e. with supply and installation of engine control panel with meters, CTs and transducers for all metering and protection, fuel pipe line upto 10 metre antivibration mountings, silent silencer, electric starter, batteries and battery charger, fuel tank of suitable for 8 hrs. capacity with level indicator, radiator, control wiring, first fill of lubricating oil, first fill of diesel oil, acoustic enclosure etc., as per specifications, with AMF panel complete with 2 Nos 250 Amp outgoing 4 pole MCCB, digital multi function meter, indication lamps etc; and accessories as required complete with necessary civil work such as grouting, chipping, finishing etc. as required complete including RCC foundation. The work should conform to CPWD specifications and shall be got certified from Electrical Inspector and NOC will be submitted by the Contractor. All required fees regarding permission shall be deposited by Contractor.
1
1156100
1156100
Design, manufacture, supply, installation and commissioning of compact substation of 11KV/415 volts, equipped with 160kVA IS1180 (level-2) transformer, 1 way SF6 RMU, HT metering, LV compartment panel. The detail bill of material for compact substation shall be as under complete as per CPWD specification:A: 1 way RMU:
12kV non extensible, indoor type SF6 gas insulated RMU consisting of 1 No
400A motorized circuit breaker with self powered IDMT relay for protection of 2O/C/C+IE/F.
a) 3 Nos resin cast CTs with ration 40/5, 15VA burden, accuracy class 1.0
b) 3 Nos resin cast CTs with ration 11KV/R3/110V/R3, 50VA burden, accuracy class 1.0A
c) 1 No. surge arrester, CL-1.0 10 kA, 1Ph
d) 1 No. multifunction meter without port
e) HT Metering enclosure with wiring B: Transformer: 160 KVA 11KV/433V 3 phase 50 Hz, copper wound oil immersed outdoor type step down transformer having delta connection on primary side and star connection on secondary side complete with all modern fittings as given in the specifications, earthing terminals, diagram and rating plate, including RCC foundation, explosion vent, off load tap changer (-10% + 5% in the step of 2.5%) etc a required as per IS 1180 Level-2
C: LV Compartment:
Incomer cum outgoing:- 1 No. 400A, 4 pole, 50kA MCCB with microprocessor based released O/C, S/C & E/F Protection Complete as above and as per CPWD specification
1
1669855
1669855
Supply, installation, fixing, testing and commissioning of 8-passenger, machine room less, electric traction lift having contract speed of 1.0 meter per second serving different floors in the exiting lift shaft as per detailed specifications attached and as under complete with all the equipment accessories
Speed: 1.0 meter per second
Floor- Ground + 1
Stop & Opening – 2 stop and 2 opening ( all opening on same side)
Controller - AC variable voltage and variable frequency
Automatic Rescue Device (ARD) complete with dry maintenance free batteries as required
Operation – Microprocessor based simplex selective – collective (with without attendant)
Power: 415 volts + 10%, 3 phase 4 wire 50 Hz AC system
Car Enclosure: stainless steel scratch proof (Moon rock finish)
Landing doors: Power operated, central opening, horizontal sliding stainless steel scratch proof (Moon rock finish)
A hand rail not less that 600mm long at 900mm above floor level to be fixed adjacent to control panel in the lift car
Voice announcement system in the car to announce the position of the elevator in the hoist way as the car passes or stops at floor served by the elevator.
a) Combined luminous hall button and digital hall position indicator
b) Battery operated alarm bell and emergency light c) Firemen switch
d) Infra-red door curtain full screen and suitable exhaust fan for lift shaft
e) Integral full height car operating panel with luminous buttons, digital car position indicator with direction arrows, with overload warning indicator, and intercom facility. Flooring: stainless steel Chequered plate flooring (minimum 2mm thick) as per manufacturer’s standards. Above as per CPWD specifications including taking NOC from lift inspector scope in the contractor.
1
1817000
1817000
Design, engineering, supply, installation, testing and commissioning of 20 KWp on grid solar power plant as per technical specification including power cable etc complete as required.
1
1357000
1357000
Supply, installation, testing and commissioning of 10 KVA online UPS single phase with 15 minutes battery (suitable 26AH/12V SMF battery) backup including suitable battery and battery rack/stand with cover, complete as required. Online APC/EMERSON,
2
556240
278120
Supply, installatio, testing and commissioning of 12.5M semi high mast shaft in single sections suitable for 47m/sec wind speed, with raising lowring system comprising, head frame, luminaries carriage suitable to install 6 nos luminaries in symmetrical arrangement, double drum winch, 6mm diameter ss wire rope, trailing cable, connector, manual handle, junction box, lightening arrestor, wiring material including cable from panel base to lights and having following material installed testing and commissioning complete as required; (i) foundation bolts with nuts, washers, anchor plate and template – 1set; (ii) Erection of the high mast with the help of suitable tools and plants, wiring of luminaries with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 1.5 sq. mm, lugs, MCB and all labour; complete as above and as per instructions of engineer-in-charge. Pole make Bajaj/Valmont, Shaffer energy or equivalent.
3
882999
294333
Supply, installation, testing and commissioning of 200W LED flood light fittings die-cast aluminium housing with inbuilt digital amient sensing zero to 35 degree easy tilt mechanism arrangement, IP 66 protection, complete in all respect on existing arm including connection etc as required .
18
628974
34943
Supply, installation, testing and commissioning of RO G1 aqua commercial RO 50LPH having purification-RO, TDS, UV etc as required. Modal HII-RO package 50, complete etc as required.
1
69115
69115
Supply, installation, testing and commissioning of drinking water cooler stainless steel body 150x150 ltr capacity etc as required .
1
82882
82882
Supply, installation, testing and commissioning of monobloc pump, 90LPM n 12mtr head with automatic start and stop system, and startor panel complete etc as required.
1
23254
23254
Supply, installation, testing and commissioning of borewell submersible pump 88LPM on 70mtr head with automatic start and stop system, and startor panel etc as required.
1
34604
34604
Supply, installation, testing and commissioning of IP based full HD 1080p bullet camera 25/30 fps image with a 1/2.8 type CMOS image sensor, 2 megapixel resolution, WDR, BLC, HLC AWB, true day/night capability, H 265 and MJPEG codec, IR LEDs provide up to 60m, triple stream support, PoE supported, motion detection, lens with focal length 2.7mm to 12mm, including junction box and mounting arrangement etc as required.
6
60330
10055
Supply, installation, testing and commissioning of IP based full HD 1080p dome camera 50/60 fps image with a 1/2.8 type CMOS image sensor, 2 megapixel resolution, WDR, true day/night provides vivid color images by day and clear black and white images at night with ICR, excellent low light performance with 3D noise reduction, saving storage and bandwidth together with H 265 high profile codec, focal length 3.67mm IR LEDs provide up to 30 m, smart IR technology provides even distribution of IR, complete as required, support defog, motion detection audio and alarm supported, SD card supported, PoE supported, IP 66 rated, including junction box and mounting arrangement etc as required
9
85734
9526
Supply, installation, testing and commissioning of network video with video management software and 16 ch NVR with 2 SATA ports, H 265 H 264 compression, supports upto 5 MP with HDMI & VGA interface, 1 RJ 45-10/100/1000 M port for communication 6 ch alarm input and 1 output client support H 264 video compression, including RACK powder coated rack complete as required etc as required.
1
12194
12194
Supply, installation, testing and commissioning of hard disk drive (4TB) etc complete as required. Seagate
2
29746
14873
Supply, installation, testing and commissioning of 55" LED TV with 1920x1080 full HD resolution and as per specifications attached suitable for mounting on wall including connection etc. complete as required.
2
161484
80742
Supply, installation, testing and commissioning of 10/100/1000 MBPS 8 port POE switch complete required.
1
13387
13387
Supply, laying, testing and installation of 6 core OFC unarmoured cable
400
35200
88
Supply, installation, testing and commissioning of 6U Rack, with all accessories for mounting of PoE managed switch etc complete as required.
1
11670
11670
Supply, laying, testing and commissioning of 2x1.5 SQ MM copper PVC insulated PVC sheided 1.1 KV grade armoured power cable etc complete as required.
450
184500
410
Supply, laying, testing and commissioning of fixing of 4 pair, cat 6, UTP cable in conduit complete as required
600
61200
102
Supply, fixing, testing and commissioning of 25mm size medium class GI conduit along with all accessories.
500
164000
328
Supply, laying, testing and commissioning of HDMI cable 5 mtr complete as required.
2
3054
1527
Supply, laying, testing and commissioning of VGA cable (5mtr), complete as required.
2
2918
1459
Supply, installation, testing and commissioning of 2KVA online UPS with 1.5 horse power backup including suitable battery and battery rack, complete as required.
1
84948
84948
Supply, installation, testing and commissioning of 55" LED TV with 02 Nos USB drive port, HDMI and full HD resolution and as per specifications attached suitable for mounting on wall including connection etc. complete as required.
2
176410
88205
Supply, installation, fixing, testing and commissioning of 8 watt ceiling mounted speaker modal – LBD0606/10 ceiling loudspeaker for PA system.
10
14660
1466
Supply, installation, fixing, testing and commissioning of siren: Two tone 50 watt speaker for PA system.
4
17748
4437
Supply, installation, fixing, testing and commissioning of Plena Booster Amplifier 120W LBD 1930/00 with power amplifier from 120W – Multiple outputs – 70V/100V and 8/4 OHM-Temperature controlled forced front to back ventilation etc as required.
1
22391
22391
Supply, installation, fixing, testing and commissioning of Microphone/MIC LBB-1950 tabletop etc as required.
1
8088
8088
Supply, laying, testing and commissioning of 2x1.5 SQ MM copper PVC insulated PVC sheathed 1.1 KV Grade Armoured Power Cable etc complete as required.
600
69000
115
Supply, installation, testing and commissioning of recess 5W LED batten mirror light fitting surface mounted having powder coated aluminium housing with driver complete with all accessories as required.
20
7920
396
Civil Work:-Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
All kinds of soil
3996.22
503323
125.95
Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of Engineer -in - charge
3809.98
479104
125.75
CONCRETE WORK
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).
249.59
1368239
5481.95
REINFORCED CEMENT CONCRETE
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).
42.61
264836
6215.35
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
59.15
422674
7145.8
Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns, etc. for mass concrete
1266.23
245585
193.95
Suspended floors, roofs, landings, balconies and access platform
101.56
42888
422.3
Lintels, beams, plinth beams, girders, bressumers and cantilevers
725.27
248695
342.9
Columns, Pillars, Piers, Abutments, Posts and Struts
369.63
172931
467.85
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
52500
2971500
56.6
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,improve workability without impairing strength and durability as per direction of the Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately)
All works upto plinth level
195.3
1311166
6713.6
All works above plinth level upto floor V level
BRICK WORK
128.6
966711
7517.2
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
Cement mortar 1:4 (1 cement : 4 coarse sand)
220.18
1094360
4970.3
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
Cement mortar 1:4 (1 cement : 4 coarse sand)
440.44
2555212
5801.5
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
Cement mortar 1:4 (1 cement :4 coarse sand)
316.12
216289
684.2
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
316.12
17971
56.85
STONE WORK
Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade.
8mm thick (mirror polished and machine cut edge)
Granite stone of any colour and shade
21
37729
1796.65
MARBLE AND GRANITE WORK
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
Granite of any colour and shade
Area of slab over 0.50 sqm
38.48
119799
3113.3
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
Granite Stone of approved shade
7.2
20390
2831.95
WOOD AND P.V.C. WORK
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
39.06
97218
2488.95
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
300x10 mm
15
1495
99.7
250x10 mm
90
7929
88.1
200x10 mm
35
2665
76.15
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
125 mm
35
1788
51.1
100 mm
25
1127
45.1
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
Twin rubber stopper
45
1710
38
Providing and fixing to existing door frames.
25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places
34.65
74662
2154.75
Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight.
67.8
278885
4113.35
STEEL WORK
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
.
2000
116900
58.45
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
11973.69
809421
67.6
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
1000
74050
74.05
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Hot finished welded type tubes
107436.52
9696145
90.25
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
250
17000
68
Providing and fixing bolts including nuts and washers complete.
300
28875
96.25
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
1000
472400
472.4
FLOORING
Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) :
Medium shade pigment using 50% white cement, 50% ordinary cement
7.2
6894
957.5
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
25 mm thick
73.16
84726
1158.1
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
15.5
19192
1238.2
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
361.67
269371
744.8
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
82.14
56541
688.35
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.
Size of Tile 600x600 mm
840.39
940732
1119.4
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.
Size of Tile 600x600 mm
16
18163
1135.2
ROOFING
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
110 mm diameter
50
11817
236.35
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.
880.39
885100
1005.35
FINISHING
12 mm cement plaster of mix :
1:4 (1 cement: 4 fine sand)
917.99
158766
172.95
15 mm cement plaster on the rough side of single or half brick wall of mix :
1:4 (1 cement: 4 fine sand)
815.72
163347
200.25
6 mm cement plaster of mix :
1:3 (1 cement : 3 fine sand)
49.67
7142
143.8
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :
New work (two or more coats) over and including water thinnable priming coat with cement primer
917.99
86015
93.7
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
815.72
78961
96.8
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
1200
101700
84.75
French spirit polishing :
Two or more coats on new works including a coat of wood filler
150
31462
209.75
Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in- charge (payment for providing grooves shall be made separately).
3330
1940058
582.6
Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge :
15 mm wide and 15 mm deep groove
1698.75
58437
34.4
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1733.72
151440
87.35
DISMANTLING & DEMOLISHING
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
377.38
376266
997.05
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
In cement mortar
121.78
102630
842.75
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :
In cement mortar
10
10057
1005.7
Dismantling steel work in built up sections in angles,
tees, flats and channels including all gusset plates,
bolts, nuts, cutting rivets, welding etc. including
dismembering and stacking within 50 metres lead.
4000
9600
2.4
Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead.
250
3762
15.05
Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :
Water bound macadam road
18
1629
90.5
bituminous road
18
3186
177
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
1260
28224
22.4
ROAD WORK
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
555
141525
255
Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in- charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).
Overhead informatory road signage
27.1
127971
4722.2
Providing Retro-reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge.
2.7
14219
5266.45
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
28.35
142108
5012.65
Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer- in-Charge.
60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern.
756
571649
756.15
SANITARY INSTALLATIONS
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
4
13976
3494.2
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
W.C. pan with ISI marked white solid plastic seat and lid
11
50531
4593.75
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
One urinal basin with 5 litre white P.V.C. automatic flushing cistern
9
31447
3494.15
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
13
29881
2298.55
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Semi rigid pipe
32 mm dia
35
2646
75.6
40 mm dia
35
2849
81.4
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
13
10633
817.95
Providing and fixing soil, waste and vent pipes :
100 mm dia
Sand cast iron S&S pipe as per IS: 1729
300
258840
862.8
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :
For 100 mm dia pipe
20
3347
167.35
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
100 mm dia
Sand cast iron S&S as per IS - 1729
20
6815
340.75
Providing and fixing heel rest sanitary bend
100 mm dia
Sand cast iron S&S as per IS - 1729
20
6351
317.55
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
100x100x100 mm
Sand cast iron S&S as per IS - 1729
20
9696
484.8
Providing and fixing terminal guard :
100 mm
Sand cast iron S&S as per IS - 1729
15
3717
247.85
Providing and fixing collar :
100 mm
Sand cast iron S&S as per IS - 1729
15
2811
187.45
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :
100 mm
20
6199
309.95
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
100 mm inlet and 100 mm outlet
Sand cast iron S&S as per IS: 3989
15
15516
1034.45
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :
100 mm diameter pipe
300
12195
40.65
WATER SUPPLY
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK
15 mm nominal outer dia Pipes
35
4222
120.65
20 mm nominal outer dia Pipes
50
7465
149.3
50 mm nominal outer dia Pipes
200
96850
484.25
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Circular tank
10000
72500
7.25
Providing and fixing PTMT bib cock of approved quality and colour.
15mm nominal bore, 86 mm long, weighing not less than 88 gms
25
2582
103.3
Providing and fixing PTMT stop cock of approved quality and colour.
15 mm nominal bore, 86 mm long, weighing not less than 88 gms
40
4132
103.3
DRAINAGE
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
30
259023
8634.1
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality
M D - 10
Circular shape 500 mm internal diameter
15
13625
908.35
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete
450 mm dia RCC pipes.
150
290400
1936
ALUMINIUM WORK
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
For fixed portion
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
3420
1214784
355.2
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
2430
1008571
415.05
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge.
Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
638.12
527310
826.35
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
With float glass panes of 5.50 mm thickness
With float glass panes of 8 mm thickness
136.01
136547
1003.95
With float glass panes of 8 mm thickness
36.3
41886
1153.9
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
With stainless steel cover plate minimum 1.25 mm thickness
20
41088
2054.4
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
219.6
89783
408.85
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
35.1
161770
4608.85
WATER PROOFING
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer- in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer- in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
519.42
537417
1034.65
RAIN WATER HARVESTING & TUBEWELLS
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
All types of soil
300 mm dia
80
29656
370.7
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
200 mm nominal size dia
150
91597
610.65
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
200 mm nominal size dia
100
82115
821.15
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
8.52
8844
1038.05
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in- charge
6.39
6633
1038.05
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer- in-charge.
6
5756
959.35
STRUCTURAL GLAZING ALUMINIUM COMPOSITE PANEL
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places."
340.68
1160322
3405.9
Supply and filling of good quality earth below subgrade to raise plinth level spreading the same in layer not exceeding 20cm compacted depth breaking clods dressing up as per surface profile watering up to OMC 2%, rolling each layer with vibratory roller to achieve 95% of max dry density. Carriage of earth up to 5.0 KM
738.55
426195
577.07
Supply & stacking of Polyalthia longifolia (Ashok) plant of height 150-165 cm in earthen potsof size 25 cm as per direction of Engineer in Charge
250
20000
80
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.
250
54800
219.2
Providing & laying Selection No. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and then rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge
3500
269500
77
Miscellaneous Works
PROVIDING AND FIXING Steel deck GI Roof Sheeting of 1.2 mm thick interior liner & Galvatite Finish with strut fixing, Weight minimum 11.46 kg/sqm., and maximum single span of 2000mm all complete as per drawings and as directed by Engineer-In-Charge
1043.11
1078575
1034
Supply of Furniture
Front desk with pedestal/Work station [1.5 mtrX0.600mtrX0.750mtr]
42
442260
10530
Storage [1.5mtrX0.450mtrX0.725mtr]
25
292500
11700
Office table with 3 drawer box sun mica with make godrej lock or equilent: Dimension: 36"x24"x30"
6
30000
5000
Revolving Office Chair PCH 7046R
140
420000
3000
Three seater bench
80
600000
7500
Filling Cabinet 4 drawer duly powder coated
6
60000
10000
Steel slotted angle rack 72"X36"X178" duly powder coated
40
112000
2800
Add 15.69% on DSR items on Rs.40313571/-
1
6325199
6325199.16
Less 9.50% on DSR Items on Rs.46638770.16
1
-4430682
4430682.86
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements