Chandigarh Administration Tender
View complete overview of Chandigarh Chandigarh Administration Tender
Chandigarh Administration Tender
Eprocure
Opening Date
10 Jan 2019Closing Date
22 Jan 2019Tender Amount
₹ 25,51,78,614Costs
EMD
₹ 35,52,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_CHD_48013_1Tender No
139-157 Civil Sectt HeritageTender Authority
Chandigarh Administration ViewPurchaser Address
-Website
http://http://chandigarh.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
2 . Providing and erecting internal scaffolding up to ceiling soffit using two legged metal tubular arrangement and any steel framework required as described in detailed drawings in rows spaced at a distance not exceeding 2.5 Metre, including suitable cross and horizontal bracing in both planes to make the entire scaffolding erected over the floor as self supporting ,space frame arrangement without anchorage from the building components. The rate includes for providing planks below base plates of tubular scaffolding pipes. Minimum of one third of the quantity of the total measured area in elevation shall be deployed at site.Where scaffolding is taken over upper floors or terrace these shall be adequately shored and supported from below. The rate to also include all cross bracings, vertical and horizontal steel props, acro and all necessary jacking and pipes and should have rubber pads at the base as to safeguard the flooring from being damaged. NS-1
4176
776736
186
Item to include providing full plaftorm/ boarding in 19 mm ply or MS Sheets to cover the entire area of the verandah areas where the scaffolding is erected. the item to also include covering the platform completely with high density plastic sheet with necessary fixing wherever required. The plaftorm should be properly anchored to the tubular sections and well supported that personnel can easily work on the platform without any nuisance and entire area to be covered such that no material falls on the floor. Access routes to be made for entry and exit to the various courtrooms on each floor and for passage of people below to use the corridor with minimum 1800 mm clear safe walkway below for pedestrian. The measurements will be calculated by multiplying the lengths of the two legged units at the centre line of the 1200-1500mm scaffold unit widths x heights of the individual rows. The rates will include for the cross bracings between the rows of the scaffold units and plaftorms to be laid horizontally all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge.
-
-
-
3 . Plaster of Paris covering of 30mm thickness over the floor area with a bottom layer of high density plastic sheet & 4 mm commercial ply over existing flooring to ensure that scaffolding/ movement of machine do not damage the historic flooring all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NS-2
4792
1106952
231
4 . Providing and erecting a temporary vertical partitions using 4 mm thick commercial plywood of approved quality and make and with adequate supporting framework to make it largely free standing to provide protection from other works in progress. The partitions shall be such that they can be removed and reused at different locations without damaging the property. Item to include printed duck tape with safety signage and words “Site Works in Progress” and “Caution” printed to cordon off areas of work. Adequate site signage in bold printed signs should be placed as per Architect’s instructions for safety instructions. NS-3
2408
2376696
987
5 . Providing and fixing temporarily 4mm thick commercial plywood protection to openings and glazed panels to be removed from site after completion of all work all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NS-4
2000
752000
376
6 . Careful Shifting of cupboards, benches, loose furniture etc stored from the court halls / verandah's / chamber's and other working areas. The clearing should be done with utmost care to avoid any breakage of Historic furniture or damage to architectural features of the building. The Item shall be paid only after the loose furniture is placed finally at the designated place, Complete in all respects and to the entire satisfaction of the Architect and Engineer in charge NS-5
1750
133000
76
B . DISMANTLING WORKS
-
-
-
1 . Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
-
-
-
a . For thickness of tiles 10 mm to 25 mm. DSR 15.23.1
9083.63
297488
32.75
2 . Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. DSR 15.25
2270.91
276823
121.9
3 . Cleaning of conglomerate / terrazo / kota / mosaic / red sand stone floors and skirting with grinding machine include machine charges complete in all respects and to the entire satisfaction of the Engineer in charge. N.S.
9881
553336
56
4 . Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). DSR 15.2.1
120.57
134025
1111.6
5 . Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
. In Cement Mortar DSR 15.7.4
640.04
601317
939.5
6 . Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR 15.56
174.52
4310
24.7
7 . Dismantling cement asbestos or other hard board ceiling or partition walls including frame work, making the required provision for scaffolding and stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. complete in all respects and to the entire satisfaction of the Engineer in charge. N.S.
17731.5
585139
33
8 . Dismantling of False ceilimg from corridors & rooms, aluminium / Gypsum partitions, fixed glazing including frame work, making required provision of scaffolding ,etc. for removing the flase ceiling, disposal of the unserviceable surplus material and stacking of serviceable material with in 50 meters lead , complete in all respects and to the entire satisfaction of the Engineer in charge. N.S.
18976.7
588277
31
9 . Dismantling existing cladding in Acoustic tiles / plywood / gypsum or any other material on walls, columns or any other surface inlcuding required scaffolding etc. & careful removal ensuring minimum damage to the original surface, stacking serviceable material and disposal of unserviceable material within 50 metres lead all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NS-7
675
19575
29
10 . Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
-
-
-
. Of area 3 sq. metres and below. DSR 15.12.1
356
58384
164
11 . Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :
-
-
-
. Of area 3 sq. metres and below. DSR 15.13.1
178
11445
64.3
12 . Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead :Thickness above 40 mm up to 75 mm DSR 15.40.2
612
121176
198
13 . Dismantling any cladding of granite and tile work in Dado and walls laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NS-8
3618.3
177296
49
14 . Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. DSR 15.3
9.3
15081
1621.7
15 . Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. DSR 15.26
1800
83880
46.6
16 . Demolishing mud phaska in terracing and disposal of material within 50 metres lead. DSR 15.27
342
142579
416.9
17 . Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR 15.60
1742.65
240747
138.15
C . TERRACE WORKS
-
-
-
1 . Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over and including a priming coat of approved steel primer on new work. 150 mm diameter pipes DSR 13.56.2
800
55320
69.15
2 . 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: With common burnt clay F.P.S.(non modular) brick tile of class designation 10 DSR 12.16.1
1800
1143270
635.15
3 . Extra for every additional 1 cm thickness of mud phaska. DSR 12.18
18000
245700
13.65
4 . Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 finesand) as per standard design :12.21.1 In 75x75 mm deep chase. DSR 12.21.1
700
103985
148.55
5 . Providing and applying bitumen of grade 25/85 confirming to IS:702 of approved quality using 1.65 kg/sqm in two coats including carraige and heating by LPG gas at the terrace level of building complete in all respects as per directions and to the entire satisfaction of the Engineer in charge NS-54
2610
365400
140
D . STRUCTURAL& CIVIL WORKS
-
-
-
1 . Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). DSR 4.1.3
22.82
108275
4744.75
2 . Cement Plaster (In Coarse Sand)
-
-
-
. 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand). DSR 13.4.1
2722.34
479131
176
3 . Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.
-
-
-
. With cement mortar 1:4 (1 cement : 4 fine sand) DSR 14.1.1
3037.5
815416
268.45
4 . CEMENT PLASTER (IN COARSE SAND) 20 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) 13.6.1
217.98
53187
244
5 . Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. DSR 14.46
56114.88
667767
11.9
6 . Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats DSR 13.60.1
91577.88
8022222
87.6
7 . Preparation of plastered or concrete surfaces for oil bound distemper or emulsion or apex paint including sand papering the surface or scrapping by patti, applying filling with cement based putty (Birla, Jk or equivalent) to the required finish complete in all respect and to the entire satisfaction of Engineer-in-charge. N.S.
91577.88
3754693
41
8 . Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water Thinnable cement primer on wall surface having VOC content less than 50 grams/litre complete in all respect and to the entire satisfaction of Engineer-in-charge. 13.85.3
56114.88
2146394
38.25
9 . Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood). DSR 13.50.1
1816.32
77738
42.8
10 . Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. DSR 13.61.1
17199.2
1576306
91.65
11 . Providing and fixing 10mm Cement Board partitions in Vertical Shafts & wherever required to separate the Services. The Framework of the partitions to be prepared using M.S. angles Verticals ISA5050 Horizontals @ 1.5 c/c ISA2525 fixed to the Shaft walls with necessary fixing methods and fixing 10 mm thick Multi purpose cement boards on the framework as directed by the Architect / Engineer-in-Charge. Item to include all necessary scaffolding, fixing tools etc all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NS-11
243
186624
768
12 . Providing and fixing Glazed Partitions with M.S. Framework of design and type as per the original partition details found on site as directed by the Architect and Engineer-in-Charge. The vertical M.S. supports to be of larger section size as per the original details with curved edge on the outer side as shown. 4 - 5mm clear glass panels of approved make like Saint-Gobain or Asahi or Modi to be fixed using small M.S. cleats as shown. The M.S. framework to be coated with 1 coat of zinc-oxide primer and 2 coats of epoxy paint of approved type and shade. Item to include all necessary sampling, welding, fixing, anchoring in masonry, painting, cleaning, scaffolding etc all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. dwg ref no TD-01. NS-12
112
286720
2560
13 . Providing and fixing Glazed Partitions with 1st Class T.W. Framework of design and type as per the original partition details found on site as directed by the Architect and Engineer-in-Charge. The damaged or replaced section of the partition to be dismantled carefully causing minimum damage to be adjoining members and replacing the same with partition design matching the existing design found on site or as directed by the Architect or Engineer-in-Charge. 4 - 5mm clear glass panels of approved make like Saint-Gobain or Asahi or Modi to be fixed using wooden beading patti as shown. All wooden members of the partition to be coated with Anti-Termite treatment of approved make. Item to include all necessary sampling, dismantling, fixing, anchoring in masonry, cleaning, scaffolding etc. required to complete the item in all respects. Mode of Measurement : Item to be paid as per only the area of the partition made new / restored all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. dwg ref no TD-01. NS-13
112
419664
3747
14 . Providing & fixing 12mm thk toughened clear fixed glass partitionupto the height of 4000 mm as shown in the drawing at all necessary joints and depending on the weight of the glass. Item to include sealant between two glass panes. Shop drawings to be approved by the Architects before installation of the glass partitions with all hardware type and its sizes and placement to ensure the partition is sturdy all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. dwg ref no TD-01. NS-14
594
2406888
4052
15 . Providing & applying 3M make frosted film with a translucent cast PVC, self-adhesive vinyl, with special CRYSTAL-effect film to reproduce Sand-blasting effect on glass partition. The thickness of the film shall be 2 mils (0.06 mm) without adhesive & 3–5 mils (0.08–0.12 mm) with adhesive. The application of the item shall be as per the company specifications all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NS-15
552
652464
1182
16 . Providing and applying 3M make security film on an internal glass partition or window/ door glass panels neatly complete as per the company specification. The film shall be Bomb Blast resistant, highly rear resistant, high strength, clear and shall have multiple micro layered (28 layers) with the strength enabling it to pass the 400 ft.lb impact level when tested according to the safety Glazing standard ANSI Z 97.1 and CPSC 16CFR. The film shall block 98% of the damaging UV rays and has abrasion resistant as per ASTM D 1044 standards all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NS-16
407
4484733
11019
17 . Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 25 mm average thickness. DSR 26.28.3
2000
105900
52.95
18 . Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars upto 12 mm diameter. DSR 26.29.1
200
910
4.55
19 . Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer. DSR 26.31.1
2000
186400
93.2
20 . Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge.
Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/ mm2).
-
-
-
a . 12 mm average thickness. DSR 26.32.1
1000
202350
202.35
b . 25 mm average thickness in 2 layers. DSR 26.32.2
1000
325400
325.4
21 . Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%. Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion). DSR 2.34
432.48
92118
213
22 . Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. DSR 2.35.5
2544
497733
195.65
23 . Drilling and boring through masonry walls upto 300 mm thick ( horizontal / angular) as required to create passage for cables, a/c tubing ducts 150-230mm dia as per architectural requirements, all labour, plant , tools, skilled manpower etc. including providing 6" dia PVC sleeve complete including grouting / filling and making good all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NS-17
3200
883200
276
24 . Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level and required to complete the item in all respects and to the entire satisfaction of the Architect and Engineer in charge. DSR 6.13.2
6480
4653288
718.1
25 . Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. DSR 22.5
3417.54
1068493
312.65
26 . Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. DSR 8.6
2465.2
575131
233.3
27 . Providing and laying 25-40mm thick terrazzo flooring rubbed and polished to match the original finish and colour perfectly, to be laid with under layer of 34mm thick cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size ) and top layer 6mm thick with white, yellow or green stone chips of size from 0 to 1 mm nominal size laid in white cement stone powder mix 3 : 1 ( 3 white cement : 1 stone powder ) by weight in proportion of 4 : 7 ( 4 white cement stone powder mix : 7 stone chips ) by volume including white cement slurry etc. complete. Care to be taken that the complete batch is matching as per the heritage material, as per the approved sample from Heritage committee. The matching of the finished surface of the terrazzo flooring as per historic pattern is paramount with requisite terrazzo density, complete in all respects and to the entire satisfaction of the Engineer in charge. dwg ref no TD-01, TD-02, TD-03. NS-19
1825.2
1496664
820
28 . Providing and applying seamless, jointless epoxy terrazzo flooring system of a total system thickness of 12 mm, ground to 10 mm average, over the prepared floor surface including cleaning, moisture testing and scarifying or other suitable surface preparation. The system should comprise of application of 100% solids epoxy primer followed by, solvent-free Epoxy terrazzo screed @ 11800 microns cutting, grinding, polishing up to specified / acceptable finish and finishing with sealer coat. The floor topping will be as per colour and design and sample already approved by the Engineering department, inclusive of laying, polishing etc with the following details : 1. The material shall be VOC compliant.
2. The pores of the finished surface shall be filled with suitable grout. 3. The sealer coat shall be matt finish and slip resistant as per relevant ASTM standards.
4. Sealer shall be resistant to Alcohol based hand and floor disinfectants.
5. The floor shall have Shore D Hardness of minimum 80, Flexural strength more than 20 N/mm2 , Compressive strength more than 65 N/mm2, Density 2.1g/cm2. 6. There shall be +- 5mm deviation from a 3 meter straight edge laid flat on the finished surface. 7. The grinding shall be done by using good quality Diamond grinders. In areas where big machine cannot move, grinding shall be done by edge grinders.
8. When repair and levelling are complete, the final surface preparation shall be carried out to remove all weak or friable concrete, living aggregate exposed.
9. Brass dividing strips should be permanently fixed to the surface of concrete at all free edges, expansion / isolation / construction / control joints in the floor substrate, at column bases, perimeter walls, door thresholds, etc
10. Prior to the execution of work, sample of flooring (3m x 3m ) shall be applied at site, which will be got inspected from Heritage Committe. The work will be got executed after incorporating the required changes and getting sample approved from Engg. Deptt. / Heritgae Committee.
11. The aggregate used for flooring i.e. marble chips shall be of best quality to give finish similar to the exisitng terrazzo flooring. The work will be got executed by specialised agencies complying the requirment as detailed in special conditions attached with the tender document, wherein it has been mentioned that the agency executing this item shall have successfully carried out epoxy terrazzo work of minimum quantity as mentioned for this item. The work will be executed complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. dwg ref no- TD-01, TD-02,TD-03 NS-20
9456
46202016
4886
29 . Providing and applying seamless, jointless epoxy terrazzo skirting of a total system thickness of 8 mm, ground to 6 mm average, over the prepared floor surface including cleaning, moisture testing and scarifying or other suitable surface preparation. The system should comprise of application of 100% solids epoxy primer followed by, solvent-free Epoxy terrazzo screed @ 7800 microns cutting, grinding, polishing up to specified / acceptable finish and finishing with sealer coat. The finish will be as per colour and design and sample already approved by the Engineering department, inclusive of laying, polishing etc with the following details : 1. The material shall be VOC compliant.
2. The pores of the finished surface shall be filled with suitable grout. 3. The sealer coat shall be matt finish and slip resistant as per relevant ASTM standards.
4. Sealer shall be resistant to Alcohol based hand and floor disinfectants.
5. The floor shall have Shore D Hardness of minimum 80, Flexural strength more than 20 N/mm2 , Compressive strength more than 65 N/mm2, Density 2.1g/cm2. 6. There shall be +- 5mm deviation from a 3 meter straight edge laid flat on the finished surface. 7. The grinding shall be done by using good quality Diamond grinders.
8. When repair and levelling are complete, the final surface preparation shall be carried out to remove all weak or friable concrete, living aggregate exposed.
9. Prior to the execution of work, sample shall be applied at site, which will be got inspected from Heritage Committe. The work will be got executed after incorporating the required changes and getting sample approved from Engg. Deptt. / Heritgae Committee.
10. The aggregate used for flooring i.e. marble chips etc. shall be of best quality to give finish similar to the exisitng terrazzo flooring. The work will be got executed by specialised agencies complying the requirment as detailed in special conditions attached with the tender document, wherein it has been mentioned that the agency executing this item shall have successfully carried out epoxy terrazzo work of minimum quantity as mentioned for this item.
The work will be executed complete in all respects and to the entire satisfaction of the Architect and Engineer in charge.dwg ref no- TD-01, TD-02,TD-03 NS-21
334
1966926
5889
30 . Repairing parts of damaged in situ terrazzo flooring, including dismanlting of damaged flooring, disposal of malba to near dumping site.Providing and laying 25-40mm thick terrazzo flooring rubbed and polished to match the original finish and colour perfectly, to be laid with under layer of 34mm thick cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size ) and top layer 6mm thick with white, yellow or green stone chips of size from 0 to 1 mm nominal size laid in white cement stone powder mix 3 : 1 ( 3 white cement : 1 stone powder ) by weight in proportion of 4 : 7 ( 4 white cement stone powder mix : 7 stone chips ) by volume including white cement slurry etc. complete. Care to be taken that the complete batch is matching as per the heritage material, as per the approved sample from Heritage committee. The matching of the finished surface of the terrazzo flooring as per historic pattern is paramount with requisite terrazzo density, complete in all respects and to the entire satisfaction of the Engineer in charge. NS-22
446.45
619672
1388
31 . Core Cutting holes up to 15 cm dia in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. DSR 18.77
432
92491
214.1
32 . Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Mild steel and Medium Tensile steel bars. DSR 5.22A.1
3024
224834
74.35
33 . Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). DSR 5.2.2
15
97849
6523.3
34 . Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). DSR 5.3
7.5
50901
6786.85
35 . Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
a . Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. DSR 5.9.2
100
40740
407.4
b . Suspended floors, roofs, landings, balconies and access platform DSR 5.9.3
50
22742
454.85
36 . Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, DSR 12.45.2
35463
35925792
1013.05
. including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for trap door at required distance as approved by the architect and for, light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
-
-
-
. 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I
-
-
-
37 . Providing and applying up to 6mm thick Plaster of Paris punning to walls in Perfect line and level over the base of single coat cement plaster including roughening of existing surface, with Perforated galvanized steel angle strip as corner protection for external angles and making 6 mm groove at skirting and door, window jamb, sill, lintel, etc. including tucking of surface for proper bonding with the plastered wall, and required to complete the item in all respects and to the entire satisfaction of the Architect and Engineer in charge. NS-45
91577.88
16392440
179
39 . Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre.
-
-
-
. 75 mm overall thickness partition with 12.5 mm thick double skin fire rated board conforming to IS: 2095: part I DSR 9.105.1
225
324393
1441.75
39 . Cleaning of exisitng concrete surface by using commercial scrubbers, detergents and washing the cleaned surface with water to remove dust, stains to make the surface clean complete in all respects and to the entire satisfaction of the Engineer in charge. NS-55
4850.4
257071
53
40 . Providing and fixing approx. 65mm thk unfinished ply partition with an internal framework of 1st class Teak Wood members of size 50mm x 50mm at a spacing of 600mm in a square grid. The 1st class Teak Wood members must be notched & screwed adequately to give rigidity to the entire framework. The framework shall be covered on both sides by 12 mm commercial plywood by means of adhesives and screws. The framework must take support wherever desired from the floor & ceiling only & the floor must not be punctured at any spot (unless otherwise approved beforehand by the architect). All internal 1st class teak wood frame members as well as the inner surface of the plywood must be treated with antitermite treatment as well as with wood preservative. Partition shall be insulated using Rock Wool 50 thick & 48 kg density pad for insulation of approved make, properly wrapped in polythene bags of 36 swg. in between 2 layers of 4mm plywood & to be put into place between 1st class T.W. framework. All exposed ply to ply joints shall be neat & well finished. Item to include incorporating a door along with necessary hardware within the partition wherever necessary as per drawing and finishing as per design all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NS-24
225
356400
1584
41 . Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). DSR 5.12
15.3
96757
6324
42 . Extra on account of lead & lift, for work of Precast / R.C.C. work above floor V level to all levels upto terrace level of Secretarait building complete in all respects and to the entire satisfaction of the Engineer in charge. N.S.
15.3
5094
333
. Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineer-in-Charge. Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument.
-
-
-
43 . 25mm thick in Grade M 25 with cement content not less
than 330 kg per cum DSR 26.38.1
40
18158
453.95
44 . 50mm thick in Grade M 25 with cement content not less
than 330 kg per cum DSR 26.38.2
40
29540
738.5
45 . Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineerin- Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work. DSR 26.35.2
6400
495040
77.35
46 . Providing and fixing 2 mm thk Corten Steel sheet cladding of the Lift wall of design and size as per the Archival references as directed by the Architect or Engineer-in-Charge. Item to include providing cement mortar backing for fixing the metal sheets including curving the edges and embedding the sheets over the concrete wall with required hold fasts as shown in the drawings or as directed by the Architect. Item to include all necessary work required all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. dwg ref no TD-01, TD-02, TD-03 NS-26
1108.8
4130280
3725
47 . Providing and laying precast terrazzo tiles of size 600x600mm of approved colour in a thickness of 20-40mm polymer modified pre cast cement terrazzo floor tiles over prepared bed of 20mm thick cement mortar 1:4. over teh exisitng floor. The tile size will be 600 x 600 mm. Cutting and polishing of the floor to the desired level of gloss. Inclusive of providing and sealing of the floor using impregnators. To be laid in as per the original design, pattern and colour, as directed, all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NS-49
1473.54
4531135
3075
48 . Providing and laying vitrified tiles of size 600x600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, having finish of historic white terrazzo (quartz based or as approved) of approved color and shade, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm completer in all repsects as per requirement of Heritage committee and to the entire satisfaction of the Engineer in charge. NS-50
3618.3
7337912
2028
49 . Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622, of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. DSR 16.90
150
239385
1595.9
50 . Providing and fixing Aluminium strips in joints of terrazo / cement concrete floors of size 40 mm wide and 3 mm thick, including fixing of Stainless steel screws @ 9" to act as hold fast to hold strip in position, complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. N.S. 54
3650
394200
108
51 . Providing & fixing 12mm thk toughened glass door using dorma make spider patch fittings as per their specification and requirement upto the height of 4000 mm. Item to include making of doors in glass wherever required and all necessary hardware for its functionality patch fittings (dorma or Hafele or ozone make) as shown in the drawing at all necessary joints and depending on the weight of the glass. Shop drawings to be approved by the Architects before installation of the glass partitions with all hardware type and its sizes and placement to ensure the partition is sturdy all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. dwg ref no TD-01 N.S. 55
66
742368
11248
E . DOOR & WINDOW RESTORATION WORKS
-
-
-
1 . Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood. DSR 9.1.1
4.17
426879
102369.15
2 . Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground within 50 meters lead :Door chowkhats. 14.2.1
105
90441
861.35
3 . Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). 9.53
420
53844
128.2
4 . Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. DSR 10.15.2
4452
589667
132.45
5 . Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
-
-
-
. 35 mm thick including ISI marked Stainless Steel butt hingeswith necessary screws. DSR 9.21.1
908.16
1526208
1680.55
6 . Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 9.83
430
312352
726.4
7 . Providing and fixing 40mm thick flushed door with a frame work of table rubbed polished 18 mm thick granite. The main door frame to be with the required rebate for an overlap between shutter and frame and 6mm grooves between plaster/ pop/ cladding etc. on all 3 sides of the door frame. Shutter shall be finished with 3mm thick laminate on both sides. The rate for the door shall include adhesive and all the hardware like bolts, nails, screws, butt hinges, handles, lock, concealed door closer, door stopper etc. required to complete the item. All the exposed hardware shall be chrome finish brass hardware with a protective lackre coat, as per approved smaple and required to complete the item in all respects and to the entire satisfaction of the Architect and Engineer in charge. NS-28
330.24
2538885
7688
5 . Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 5.5 mm. 14.5.2
2342.75
2318853
989.8
9 . Removal of all existing paint and / or polish layers from any type of wooden surfaces / concrete surfaces by careful scraping using sand paper and grinding wheel if required and preparing the surface to receive french polish/melamine polish or paint etc all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NS-30
6421.44
327493
51
10 . Providing and applying two coats of fire retardant paint on cleaned wood / ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. DSR 13.58
4540.8
1183105
260.55
11 . Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634- 1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately). DSR 9.162
158.4
1241681
7838.9
12 . Providing and fixing non load bearing fixed frame for fire resistant glazed Partition for 120 min Fire Rating, made out to a profile of dimension 60mm x 70 mm of 1.6 mm thick galvanised steel sheet as per test evidence suitable for fixing fire rated glass for 120 min of both integrity & radiation control (EW120) & minimum 15 min of insulation (EI15).The profile has to be fixed to the supporting construction by means of anchor fasteners of size M10 x 80, every 150 mm from the edges and every 500 mm (approx) c/c. Linear meaurement of frame shall be measured for payment. The frame shall be filled with mineral wool insulation of density min 96kg/ m³. and finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge. dwg ref no TD-02, TD-03. DSR 9.163
600
849180
1415.3
13 . Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per direction of Engineer-in-charge. .The maximum glazing size cannot be more than 1100 mm x 2200 mm (w x h) or 2.42 sq mts in total area. The test report for the complete system (Glazed Door or Partition) will be considered valid only if it contains the stamp and signature of the authorized signatory from the glass manufacturer. (Actual glass size is to be measured at site for payments). dwg ref no TD-02, TD-03. DSR 9.164
158.4
6183381
39036.5
14 . Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width. DSR 21.8.1
1680
120288
71.6
15 . Providing and fixing heavy duty decorative type brass hardware as per design, size, pattern and weight of the historic hardware including all necessary fixtures like brass screws etc. complete. Item to include preparing samples for approval from the Architect before making the entire lot. and required to complete the item in all respects and to the entire satisfaction of the Architect and Engineer in charge. NS-31
1642.05
3596089
2190
16 . Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm. DSR 14.5.1
2342.75
1787166
762.85
17 . Renewal of old putty of glass panes (length). DSR 14.9
2342.75
62317
26.6
F . FURNITURE WORKS
-
-
-
1 . Providing and fixing in position Information Counter of 3500 mm length x 500 mm deep and 750 mm high as shown in the drawing. The counter to be made with a workstation table top in 38 mm thk plywood (made by using 2 nos. 18mm HDHMR / DWR board) supported on 19 mm thk verticals and 12 mm thk corian table top as shown in the drawing. All the construction shall be in 18mm thick commercial plywood. All exposed surfaces of the storage shall be finished with approved in metallic duco paint. All internal and external surfaces shall be finished with approved duco paint finish . The rate shall be inclusive of adhesive and all the hardware like nails, screws, etc. required to complete the item. The front of the reception table and the table top to be cladded with 12 mm thk Corian of approved colour as indicated in the drawing. Item to include all internal shelving necessary for the workstation as shown in the drawing, as per sample to be approved. Corian shall have Seamless appearance in the fabrication process, joints be made nearly invisible by joining the relevant pieces with Corian's own color-matched two-part acrylic adhesive, with pieces clamped tightly together in order to express any excess adhesive. After the adhesive dries, the area to be sanded and polished to create a near-seamless joint. All the exposed hardware shall be SS finish with a protective lackre coat. all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. dwg ref no- TD-07 NS-32
3
223743
74581
2 . Providing cafe table of size 1200mm X 1200mm X 800mm, with corian 12 mm thick bendable acrylic based surface cladding as per manufactures specifications to be pasted with requisite adhesives on 2 sheets of 18 mm thick HDHMR / DWR board. The legs of the table shall be made of Stainless steel 304 garde, cylindrical shaft with square base, with concealed non-marring bushes underneath square base. The rate shall be inclusive of adhesive and all the hardware like nails, screws, etc. required to complete the item, as per sampled to be approved all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge.dwg ref no TD-05 NS-33
22
502590
22845
3 . Providing and fixing folding MS dining chair without arm rest in the approved colour and make. The chair shall be of size : 800 (height), 400 mm (width), 400mm (length), 400 mm (seating height). The frame of chair shall be madeof 22mm x 1.2mm round 18 guage, powder coated steel pipe frame, with double braced frame, non-marring glides, riveted steel components all complete in all respects, as per approved sample and to the entire satisfaction of the Architect and Engineer in charge. dwg ref no TD-05 NS-34
88
409992
4659
4 . Providing and fixing cabinets shutters below working shelves in kithcen made with 18mm thick HDHMR / DWR ply for kitchen under counter storage. Shutters to be openable of approx. 450mm - 525mm width, fixed on hard wood frame of 50x50mm size. All exposed surfaces of the storage shall be finished with laminate 1.0mm thick of approved sample, while the internal side be provided with 1.0 mm thick laminate, all exposed edges finished with PVC edge banding matching the colour and texture of the laminate approved make. Storage rate shall be inclusive of adhesive and all the hardware like nails, screws, hinges, locks, handles (8" s.s.), towerbolts, magnetic catcher, etc. required to complete the item complete in all respects and to the entire satisfaction of the Engineer in charge. dwg ref no- TD-05 NS-36
40.32
131886
3271
5 . Providing and fixing wooden cabinet 375 mm deep for overhead storage fixed to the wall in kitchen. Storage shall be built out of 18mm thick HDHMR / DWR plywood used for top, bottom, verticals and internal shelves, 6mm waterproof plywood used for back side. Shutters to be openable of approx. 450mm - 525mm width and shall be 19mm longer from the storage base such that no additional handle/knob is required to open the shutters. All exposed surfaces of the storage shall be finished with 1.0mm thick laminate of approved shade, while internal side with 1.0mm thick mica of approved make with all exposed edges finished with PVC edge banding matching the colour and texture of the laminate. Rate shall be inclusive of adhesive and all the hardware like nails, screws, hinges, locks, towerbolts, magnetic catcher etc. required to complete the item complete in all respects and to the entire satisfaction of the Engineer in charge.. dwg ref no- TD-05 NS-37
27.49
144652
5262
6 . Providing and fixing 18mm HDHMR / DWR ply Wood cabinet for Distribution board (DB), panels etc including shelf if required. Item to include fully openable louvered shutters as shown in the drawing. Item to include finishing externally and internally with enamel paint as per the shade approved by the Architect or Engineer-in-Charge, with necessary fixtures and fastenings as per detailed design and drawing etc. complete. Item to include fixing of all hardware, hinges, nails etc as required in the design. SS Chrome finish Brass handles to be provided and fixed. complete in all respects and to the entire satisfaction of the Engineer in charge. NS-52
1080
2029320
1879
G . ADDITIONAL CIVIL WORKS
-
-
-
1 . Providing and fixing 75 mm thick RCC (1:2:4 grade) basin counter (minimum steel 70 kg per cum) inclusive of reinforcment and shuttering and finishing as per Architects approval including leaving holes or cutout as per site requirement, in the counter for basin and tap as per design specified by the architect. Counter may only have one support from the back wall no verticals shall be permitted all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. dwg ref no TD-02, TD-03 NS-39
11.26
90091
8001
2 . Providing and fixing corian 12 mm thick bendable acrylic based surface cladding as per manufactures specifications and Architects instructions with all fixing whether on vertical surface or horizontal, on walls, counters and or furniture. Corian shall have Seamless appearance in the fabrication process, joints be made nearly invisible by joining the relevant pieces with Corian's own color-matched two-part acrylic adhesive, with pieces clamped tightly together in order to express any excess adhesive. After the adhesive dries, the area to be sanded and polished to create a near-seamless joint all inclusive all complete in all respects, as per sample approved and to the entire satisfaction of the Architect and Engineer in charge. dwg ref no TD-02, TD-03 NS-40
48.6
582422
11984
3 . Providing and fixing corian 6 mm thick non bendable cladding as per manufactures specifications and Architects instructions with all fixing whether on vertical surface or horizontal, on walls, counters and or furniture, Corian shall have Seamless appearance in the fabrication process, joints be made nearly invisible by joining the relevant pieces with Corian's own color-matched two-part acrylic adhesive, with pieces clamped tightly together in order to express any excess adhesive. After the adhesive dries, the area to be sanded and polished to create a near-seamless joint all inclusive as per sample approved all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. dwg ref no TD-02, TD-03 NS-41
101.59
946514
9317
4 . Removing/Scraping old paint from steel and other metal surface and making the surface even with hand scraping or by mechanical means scaffolding necessary and applying ready mix red oxide zinc chromatic etc. complete.Complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NS-44
242.21
17439
72
5 . Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On Steel Work. Complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. DSR 13.52.1
242.21
32141
132.7
6 . Providing and fixing 40mm thick flushed door (with sliding arrangement) with a frame work of aluminium. Shutter shall be finished with 1mm thick laminate of approved shade and sample, on both sides. The rate for the door shall include adhesive and all the hardware like bolts, nails, screws, butt hinges, handles, lock, etc. required to complete the item. All the exposed hardware shall be chrome finish brass hardware with a protective lackre coat. all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NS-47
79.8
543757
6814
7 . Providing & fixing of extruded aluminium box sections barrication system having PVDF coating to match the finish on terrace. All fixing shall have concealed s.s. 304 screws and the fixing details designed to integrate with the column post fixed at every 1.2 m and slats running horizontally with adequate fixing, also inclusive opening door for access with all necessary hardware all complete and to the entire satisfaction of the Architect and Engineer in charge. NS-53
300
1597500
5325
Part (B) Public Health Work
-
-
-
1 . Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : DSR-18.11
-
-
-
15 mm nominal bore DSR-18.11.1
199
66774
335.55
20 mm nominal bore DSR-18.11.2
254
95351
375.4
2 . Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. DSR-18.1
-
-
-
15 mm nominal bore DSR-18.10.1
35
7546
215.6
20 mm nominal bore DSR-18.10.2
32
8380
261.9
25 mm nominal bore DSR-18.10.3
25
8566
342.65
32 mm nominal bore DSR-18.10.4
50
21037
420.75
40 mm nominal bore DSR-18.10.5
332.57
167349
503.2
3 . Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : DSR-18.13
-
-
-
25 to 40 mm nominal bore DSR-18.13.1
94
38666
411.35
4 . Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : DSR-18.17
-
-
-
25 mm nominal bore DSR-18.17.1
53
42097
794.3
32 mm nominal bore DSR-18.17.2
38
40931
1077.15
40 mm nominal bore DSR-18.17.3
12
17706
1475.55
5 . Providing and fixing soil, waste and vent pipes DSR-17.35
-
-
-
a) 75 mm (3") dia. Sand cast iron S&S pipe as per IS: 1729 DSR-17.35.2.1
715
638280
892.7
b) 100 mm (4") dia. Sand cast iron S&S pipe as per IS: 1729 DSR-17.35.1.1
800
866600
1083.25
6 . Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : DSR-17.58
-
-
-
100 mm DSR-17.58.1
522
212662
407.4
75 mm DSR-17.58.2
428
149864
350.15
7 . Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. DSR-17.38
-
-
-
a) 75 mm (3") dia. Sand cast iron S&S as per IS - 1729 DSR-17.38.2.1
94
43014
457.6
b) 100 mm (4") dia. Sand cast iron S&S as per IS - 1729 DSR-17.38.1.1
94
51394
546.75
8 . Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. DSR-17.43
-
-
-
a) 75 mm (3") dia. Sand cast iron S&S as per IS - 1729 DSR-17.43.2.1
47
29516
628
b) 100 mm (4") dia. Sand cast iron S&S as per IS - 1729 DSR-17.43.1.1
47
41775
888.85
9 . Providing and fixing plain bend of required degree. DSR-17.39
-
-
-
a) 75 mm (3") dia. Sand cast iron S&S as per IS -1729 DSR-17.39.2.1
94
36251
385.65
b) 100 mm (4") dia. Sand cast iron S&S as per IS - 1729 DSR-17.39.1.1
94
49354
525.05
10 . Providing and fixing single equal plain junction of required degree : DSR-17.44
-
-
-
a) 75 mm (3") dia. Sand cast iron S&S as per IS - 1729 DSR-17.44.2.1
47
26759
569.35
b) 100 mm (4") dia.Sand cast iron S&S as per IS - 1729 DSR-17.44.1.1
47
38629
821.9
11 . Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. DSR-18.77
115
24886
216.4
12 . Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.--In gratings, frames, guard bar, ladder, railings, brackets, gates
and similar works DSR-10.25.2
733
77954
106.35
13 . Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc DSR-18.78
277
27035
97.6
14 . Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : DSR-17.6
-
-
-
100 mm inlet and 75 mm outlet DSR-17.60.2
-
-
-
Sand Cast Iron S&S as per IS- 1729 DSR-17.60.2.2
114
93633
821.35
15 . Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : DSR-17.59
-
-
-
100 mm DSR-17.59.1
84
11676
139
75 mm DSR-17.59.2
84
9580
114.05
16 . Cutting holes up to 30x30 cm in walls including making good the same. DSR-18.76
38
9203
242.2
17 . Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New DSR-18.46
-
-
-
15 mm nominal bore DSR-18.46.1
20
3401
170.05
20 mm nominal bore DSR-18.46.2
28
5209
186.05
25 mm nominal bore DSR-18.46.3
48
10783
224.65
18 . Providing and laying of cement concrete - all works upto plinth level : DSR-4.1
-
-
-
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) DSR-4.1.3
30
140737
4691.25
19 . Centering and shuttering including strutting, propping etc. and removal of form for all heights : DSR-5.9
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete DSR-5.9.1
30
6558
218.6
20 . Providing and fixing collar : DSR-17.57
-
-
-
100mm Sand cast iron S&S as per IS - 1729 DSR-17.57.1.1
80
22196
277.45
75mm Sand cast iron S&S as per IS - 1729 DSR-17.57.2.1
80
18176
227.2
21 . Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : DSR-15.44
-
-
-
15 MM TO 40 MM DSR-15.44.1
288
20491
71.15
22 . Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : DSR-15.42
-
-
-
75 to 80 mm dia pipe DSR-15.42.1
400
13800
34.5
100 mm dia pipe DSR-15.42.2
350
12460
35.6
23 . Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. DSR-17.13.2
96
202104
2105.25
24 . Providing and fixing in position Wall Mounted European style White vitreous European W.C. of Hindware 'Element' / Jaquar 'Kubix' / Cera 'Columbia' Series with P trap, Wall Bracket and other necessary fixing required to make the item functional complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NSR
120
2204160
18368
25 . Providing and fixing concealed flushing cistern : along with push plate the necessary fixing required to make the item well functional complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. A. Jaquar Single Piece Slim Concealed Cistern with wall mounting frame, installation kit JCS-WHT-2400WS with 'Kubix' Control Plate JCP-CHR-352415 / KOHLER / CERA. NSR
216
2987064
13829
26 . Providing and fixing Table Top Wash Basin of Hindware 'Kathy Mini' Series / Jaquar 'Florentine' / Cera Casket' Series with CP Finish Click Clack waste coupling and bottle trap all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NSR
230
2403960
10452
27 . Providing and fixing CP Finish Single Lever Basin Mixer of Jaquar 'Solo' / Cera 'Gayle' / Hindware 'Flora' Series 450mm Long Braided Hoses including making necessary connections complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NSR
230
1047420
4554
28 . Providing and fixing in position CP Finish Health Faucet of Jaquar ALD-563 / Hindware F1600 13CP / Cera F 8030103 with necessary length of flexible pipe, C.P. wall bracket for hanging the spray etc. complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NSR
120
171120
1426
29 . Providing and fixing CP Finish toilet paper holder of Jaquar AKP-35751P / Hindware F450027CP/ Cera F5001109 all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NSR
120
157920
1316
30 . Providing and fixing Wall Mounted Paper Towel Dispenser of Jaquar PTD-SAP-DT0106CS including making necesary connections etc. complete in all respects and to the entire satisfaction of the Architect and Engineer in Charge NSR
147
1279488
8704
31 . Providing and fixing Wall Automatic Soap Dispenser of Jaquar SDR-BLC-DJ0160AS including making necesary connections etc. complete in all respects and to the entire satisfaction of the Architect and Engineer in Charge NSR
147
1573047
10701
32 . Providing and fixing 150 x 150mm SS 304 Floor Trap with Tile Insert Anti Cockroach trap complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NSR
424
590208
1392
33 . Providing and fixing CP Finish Robe Hooks of Jaquar AKP-35791P / Hindware F840007CP/ Cera F5007108 all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NSR
250
179250
717
34 . Providing and fixing CP Brass finish 2 in 1 bib tap of Jaquar 'Solo' / Cera 'Gayle' / Hindware 'Flora' Series with the necessary fixing required to make the item well functional all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NSR
120
266880
2224
35 . Providing and fixing CP Finish Concealed Stop Cock of Jaquar 'Solo' / Cera 'Gayle' / Hindware 'Flora' Series complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NSR
300
228000
760
36 . Providing and fixing CP finish Angle cock of Jaquar 'Solo' / Cera 'Gayle' / Hindware 'Flora' Series with the necessary fixing required to make the item well functional complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NSR
460
686320
1492
37 . Providing and fixing wall mounted Swivel Type Sink Cock of Jaquar COT-23347 / Hindware F330024CP / Cera F1015251, complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NSR
44
85668
1947
38 . Providing and fixing in position white vitreous flat back urinals of Jaquar URS-WHT-132530 / Hindware 96008 / Cera 5005 Series consisting of the following C.P. brass waste coupling, C.P. brass bottle trap with extension piece and wall flange,flush valve,C.P. flush pipe with C.P. distribution arms and C.P. spreaders for set of one, two and three urinals.and inclusive of making water and drain connections complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NSR
130
1495000
11500
39 . Providing and fixing Nirali Olympia Anti-Scratch / Cera Prince Matt make stainless steel sink for the pantry with the necessary fixing required to make the item well functional complete in all respects and to the entire satisfaction of the Architect and Engineer in charge NSR
44
831864
18906
40 . Providing and fixing SS 304 1" - 1.5" dia Grab Bars of required design and type as directed by the Architect or Engineer in Charge. Item to include necessary anchoring in the walls, making good the damages including necessary tools, hardware etc. required to complete the items in all respects or any other make as mentioned in the approved list to the entire satisfaction of the Architect and Engineer in charge. NSR
-
-
-
A. 692mm Long - Jaquar WAC-SAP-BR0600CS
115
1031550
8970
B. 842mm Long - Jaquar WAC-SAP-BR0750CS
77
741972
9636
41 . Providing, fixing and testing of 'P-trap'of HCI fitting for Public Health Works complete in all respect to satisfaction of EIC NSR
96
48000
500
42 . Providing and fixing bevelled edge mirror of superior glass (of approve quality) complete with 1" dia ss studs fixing finished Rate to include backing of 12mm marine ply all complete in all respects and to the entire satisfaction of the Architect and Engineer in charge. NSR
1200
258000
215
43 . Providing and fixing of Aquisense Sensor concealed type flushing valve for urinal complete set with installation box with control cock complete in all respects. Make Jaquar Series SNR-STL-51077. NSR
130
2339740
17998
44 . Providing and fixing of M.S. Sheet tanks of 5mm thick of size 3.2 x 3.2 x 1mm cap at terrace of Sectt. With MS frame with supports, inlet, outlet overflow and openalbe cover at top with two coats of black enamel paint after primers coat inside and outside of MS tank complete in all respect. NSR
18194.85
1935022
106.35
Part (C) Electrical Installation Work
-
-
-
1. DSR Item No.1.8 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
2192
1659344
757
2. DSR Item No.1.55 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
2040
846600
415
3. DSR Item No 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
288
90144
313
4. DSR Item No 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
684
277704
406
5. DSR Item No 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
5/6 A switch
144
12096
84
3 pin 5/6 A socket outlet
144
11664
81
Telephone socket outlet
54
5184
96
TV antenna socket outlet
54
5238
97
Bell push
135
15390
114
6. DSR Item No 1.27 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.
-
-
-
1 or 2 Module (75 mmX75 mm)
108
18900
175
7. DSR Item No 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
1800
102600
57
25 mm
11250
776250
69
32 mm
1800
160200
89
8. DSR Item No 1.17 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.
-
-
-
3 x 1.5 sq. mm
11250
562500
50
3 x 2.5 sq. mm
14400
1080000
75
3 x 4 sq. mm
2250
249750
111
3 x 6 sq. mm
100
16200
162
6 x6 sq. mm
100
32000
320
9. DSR Item No 1.53 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable
2500
85000
34
10. DSR Item No 1.18 Supplying and drawing following pair 0.5 mm dia. FRLS PVC insulated annealed copper conductor, un armoured telephone cable in the existing surface/ recessed steel/ PVC conduit as required.4 Pair
1000
28000
28
11. DSR Item No 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
1000
29000
29
12. DSR Item No 2.3 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess ,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 way, Double door
54
57294
1061
13. DSR Item No 2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections powder painted Including earthing etc. as required. (But without MCB/RCCB/ Isolator)4way (4 + 12), Double door
54
118692
2198
14. DSR Item No 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with Connections, testing and commissioning etc. as required.
-
-
-
Single Pole
972
168156
173
Single pole & Neutral
108
48060
445
15. DSR Item No.4.1 Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts& nuts, painting suspenders etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
150
52200
348
300 mm width X 50 mm depth X 1.6 mm thickness
100
52600
526
600 mm width X 50 mm depth X 2.0 mm thickness
150
142500
950
16. Providing and fixing MCB TPN 63 AMP 4 Pole 415 volt in the existing BDB/cubical panel/L.T Panel as per site requirement. The 63 amp. C curve MCB TPN with 10 KA breaking capacity should of Hager (H3 ) / L&T (Exora) / Siemens (Betagard) / ABB (S200 M) / Schnieder (Acti 9) / Legrand (DX3) make only as required to the entire satisfaction of engineer in charge.
108
181980
1685
17. DSR Item No 5.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc.
12
99468
8289
18. DSR Item No 5.8 Supplying and laying 25 mm X 5 mm copper strip at 0.50 meter below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50 mm)
570
339150
595
19. DSR item No. 6.2 Providing and fixing of lightning conductor finial, made of 25 mm dia. 300mm long, G.I. tube, having single prong at top, with 85mm dia. 6mm thick G.I. base plate including holes etc. complete as required.
28
8512
304
20. DSR item No. 6.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
270
17820
66
21. DSR item No. 6.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
144
14400
100
22. DSR item No. 6.14 Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
60
6720
112
23. DSR item No. 5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
4
17308
4327
24. DSR Item No 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
180
51840
288
25. S/E of AC ceiling fans with copper winding but without regulator complete with Aluminium blades, plastic canopies 2 Nos. double ball bearing, MS hanging rods (As per site requirement), condenser, reels, clamps etc. The body of fan and blades should be white in colour. The job includes the cost of making necessary connections from the adjacent light point with 1.5mm2 single core copper conductor cable and 3mm thick white B.L. sheet cover for fan box of suitable size. The sample of fans shall be got approved from the SDE in-charge of work before installation at site. The job also includes the cost of carriage, erection, testing, commissioning of fan, all labour and petty material required to complete the job to the entire satisfaction of the Engineer-In-Charge. Size 56” (1400mm) sweep ceiling fan of Crompton (High Speed) Opal White / Havells (Velocity HS ) White / Orient (Newbreeze) white / Usha (Striker) white only
180
422100
2345
26. Supply & erection of Exhaust Fan (heavy duty motor with copper wound metallic body) following size complete with motor, metallic blades, double ball bearing with minimum power consumption, rigid frame with rubber mounting for silent operation, epoxy powder coating along with metallic louver to be installed in the existing opening including cost of making the hole to suit the size of above fan making good the damage, Carriage Charges connection, testing, commissioning etc. as required to complete the job to the entire satisfaction of EIC. Size 12 inches (300mm) Sweep, 900 RPM Heavy Duty Exhaust fan (Single Phase) with louver of Havells (Turbo Force SP) / Crompton (EXHD300-6-1) / Bajaj (Supreme Dlx HD 300) / Orient (12” Industrial Heavy Duty) / Almonard make only.
108
329940
3055
27. Supply & Erection of Wall Fan 400mm sweep oscillating type complete with blades with regulator. The fan should be of Havells (Platina)/ Cromton (Hi Flo Wave) / Khaitan (Merlin) make only. The cost including connection with adjacent light points as required complete the job to the entire satisfaction of EIC.
270
641250
2375
28. S/E of 2’x2’ LED fitting recess type with integral / non integral driver to be installed recess in false ceiling. The fitting should be Philips / Wipro / Zumtobel /Trilux make only. The job includes the cost of testing, commissioning and making connection with copper wire from adjacent light point. The fittings should be installed at site with suitable arrangement and the cost includes of 4 nos. MS chain of suitable size and length for support of fittings. The job includes all labour and petty material required to complete the job to the entire satisfaction of the EIC of work. The LED fittings should be as per following design criteria.
-
-
-
a. Wattage of LED fittings As per following parameter.
-
-
-
b. Total lumens of the LED fittings Minimum 3600 lumen
-
-
-
d. Body of fittings CRCA steel sheet with opal acrylic diffuser/ Extruded al. Housing CRCA front frame opal diffuser/ CRCA power coated housing with high efficiency translucent diffuser.
-
-
-
e. Operating voltage 140 V to 270 V, AC supply or better.
-
-
-
f. Input frequency 50 Hz + 1 Hz
-
-
-
g. Power factor Minimum 0.90
-
-
-
h. Luminaire efficacy 110 lm/w
-
-
-
i. Color rendering indexCRI shall be 80 (minimum)
-
-
-
j. Working/ operating temperature 00 to + 450c or better
-
-
-
k. Color temperature 57000K +10%
-
-
-
L. Electronic Driver
-
-
-
i. Drive current (LED)As per OEM.
-
-
-
ii. Operating voltage 140 V to 270 V AC supply or better
-
-
-
iii. Type of driver Constant current output driver
-
-
-
iv. THD Less than 10%
-
-
-
v. Surge Protection 3 KV minimum
-
-
-
vi. Efficiency Driver 80%
-
-
-
vii. Protection Shall have under voltage and over voltage protection.
-
-
-
m. Warranty of LED fittings including LED driver 2 years against manufacturing defect.
-
-
-
n. Fixture Should comply with LM 79 test from NABL/UL approved lab.
-
-
-
o. LED Type/ Make/ Model Power CREE/ OSRAM/ NICHIA/ Philips LUMILED/ Edison with life more than 50,000 burning hour’s @70% lumen maintenance complying with LM 80 test report from the manufacturer.
-
-
-
p. Life of luminaire 50000 burning hours at 70% lumen maintenance
395
1327200
3360
29. S/E of square type LED down lighter with open integral driver. The down lighter should be of Philips / Wipro/ Trilux / Zumtobel make only. The job includes the cost of testing, commissioning and making connection with copper wire from adjacent light point, other petty material and labour etc. as required to complete the same to the entire satisfaction of EIC.
-
-
-
a. Total lumens of the LED fittings Minimum 1200 lumen
-
-
-
b. Body of fittings Die cast housing made of aluminium & white power coated finishing
-
-
-
c. Operating voltage 160 V to 240 V, AC supply or better.
-
-
-
d. Input frequency 50 Hz + 1 Hz
-
-
-
e. Power factor Minimum 0.90
-
-
-
f. Luminaire efficacy 80 lm/w
-
-
-
g. Color rendering index CRI shall be 80 (minimum)
-
-
-
h. Working/ operating temperature 00 to + 450c or better
-
-
-
i. Color temperature 57000K + 10%
-
-
-
Electronic Driver
-
-
-
i. Drive current (LED) As per OEM.
-
-
-
ii. Operating voltage 160 V to 240 V AC supply or better
-
-
-
iii. Type of driver Constant current output driver
-
-
-
iv. THD Less than 10%
-
-
-
v. Surge Protection 3 KV minimum
-
-
-
vi. Efficiency Driver 80%
-
-
-
vii. Protection Shall have under voltage and over voltage protection.
-
-
-
m. Warranty of LED fittings including LED driver
-
-
-
2 years against manufacturing defect.
-
-
-
n. Fixture Should comply with LM79 test from NABL/UL approved.
-
-
-
o. LED Type/ Make/ Model Power CREE/ OSRAM/ NICHIA/ Philips LUMILED/ Edison with life more than 50,000 burning hour’s @70% lumen maintenance complying with LM 80 test report from the manufacturer.
-
-
-
p. Life of LED 50000 burning hours at 70% lumen maintenance
2024
3430680
1695
30. S/I/T/C of Heritage wall mounted customized type LED fitting as per design enclosed at Annexure “A”. The body of the fittings should be of aluminium painted in night blue color. The fittings should be provided alongwith curve diffuser glass and sand blasted in inner part. The fittings should be of ALW / K-Lite/ Wipro/ Delta make only. The job includes the cost of testing, commissioning and making connection with copper wire from adjacent light point, other petty material and labour etc. as required to complete the same to the entire satisfaction of EIC.
-
-
-
Specification of LED fittings:
-
-
-
a. Wattage of LED fittings As per following parameter
-
-
-
b. Total lumens of the LED fittings Minimum 2000 lumen
-
-
-
c. Operating voltage 140 V to 270 V, AC supply or better.
-
-
-
d. Input frequency 50 Hz + 1 Hz
-
-
-
g. Power factor Minimum 0.95
-
-
-
h. Luminaire efficacy 100 lm/w
-
-
-
i. Color rendering index CRI shall 70 (minimum)
-
-
-
j. Working/ operating temperature 00 to + 450c or better
-
-
-
k. Color temperature 40000 K to 65000K
-
-
-
(Color as approved).
-
-
-
l. Electronic Driver
-
-
-
i. Drive current (LED) As per OEM
-
-
-
ii. Operating voltage 140 V to 270 V AC supply or better
-
-
-
iii. Type of driver Constant current output driver
-
-
-
iv. Surge Protection 2.5 KV minimum
-
-
-
v. Efficiency Driver 85%
-
-
-
vi. Protection Shall have under voltage and over voltage protection.
-
-
-
viii. Warranty of LED fittings including LED driver 2 years against manufacturing defect.
-
-
-
k. Fixture Should comply with LM79 test from NABL/UL approved lab.
-
-
-
l. LED Type/ Make/ Model Power CREE/ OSRAM/ NICHIA/ Philips LUMILED/ Edison with life more than 50,000 burning hour’s @70% lumen maintenance complying with LM 80 test report from the original manufacturer.
-
-
-
m. Life of LED 50000 burning hours
96
1109760
11560
31. S/I/T/C of old Heritage ceiling suspended customized type LED fitting as per design enclosed at Annexure “A-1”. The body of the fittings should be of aluminium painted in night blue color. The fittings should be provided alongwith curve diffuser glass and sand blasted in inner part. The fittings should be of ALW /Delta/K-Lite/ Wipro make only. The job includes the cost of testing, commissioning and making connection with copper wire from adjacent light point, other petty material and labour etc. as required to complete the same to the entire satisfaction of EIC.
-
-
-
Specification of LED fittings:
-
-
-
a. Wattage of LED fittings As per following parameter
-
-
-
b. Total lumens of the LED fittings Minimum 6000 lumen
-
-
-
c. Operating voltage 140 V to 270 V, AC supply or better.
-
-
-
d. Input frequency 50 Hz + 1 Hz
-
-
-
g. Power factor Minimum 0.95
-
-
-
h. Luminaire efficacy 100 lm/w
-
-
-
i. Color rendering index CRI shall 70 (minimum)
-
-
-
j. Working/ operating temperature 00 to + 450c or better
-
-
-
k. Color temperature 40000 K to 65000K (Color as approved).
-
-
-
Electronic Driver
-
-
-
i. Drive current (LED) As per OEM
-
-
-
ii. Operating voltage 140 V to 270 V AC supply or better
-
-
-
iii. Type of driver Constant current output driver
-
-
-
iv. Surge Protection 2.5 KV minimum
-
-
-
v. Efficiency Driver 85%
-
-
-
vi. Protection Shall have under voltage and over voltage protection.
-
-
-
vii. Warranty of LED fittings including LED driver 2 years against manufacturing defect.
-
-
-
m. Fixture Should comply with LM79 test from NABL/UL approved lab.
-
-
-
n. LED Type/ Make/ Model Power CREE/ OSRAM/ NICHIA/ Philips LUMILED/ Edison with life more than 50,000 burning hour’s @70% lumen maintenance complying with LM 80 test report from the original manufacturer.
-
-
-
o. Life of LED 50000 burning hours
167
2167827
12981
32. S/E of under floor raceways of PVC rectangular sections of following sizes inclusive of cutting, chasing & refinish with cement plaster in PCC/IPS flooring. (Civil work excluded) as required complete the job to the entire satisfaction of EIC. The PVC raceway should be of Legrand/MK (Honeywell) /OBO (Bettermann)/Hager / Schneider make only
-
-
-
1 Run of 90 mmx 35 mm x 2 mm thick
50
16500
330
2 Run of 90 mmx 35 mm x 2 mm thick
50
32750
655
3 Run of 90 mmx 35 mm x 2 mm thick
10
9750
975
33. Dismantling of existing multi sensor smoke detector / fir e detector/ hooter/speaker/MCPs/ Dish from existing ceiling /false ceiling & façade of the building & reinstall the same. The cost includes testing commissioning as per satisfaction of EIC.
1500
223500
149
34. Dismantling of existing fire sensing wiring with existing conduit / speaker wiring with conduit/ data cable with conduit & dish cable etc. & re-erection of same. The cost including dismantling from ceiling/false ceiling & facade of the building and re-erects the same with clamps & other petty material includes testing commissioning as per satisfaction of EIC.
10000
340000
34
35. Dismantling of existing MCB TPN BDB, s / ICTPN switches etc. from existing wall of the corridor of the building & reinstallation of the same at the proper place as per satisfaction of EIC. The cost including testing & commissioning etc.
20
1000
50
36. DSR3.13 Supplying, installing by suspension on ceiling/along the wall, testing and commissioning of following capacity Sandwich Type Bus trunking for use on 3 phase 4 wire 415 V, 50Hz A.C. supply with metal clad enclosure having IP-54 rating after fixing the tap off boxes and all accessories with Class 'F' insulation, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos. aluminium bus bars having current density of 130 A/ sq. cm at nominal current rating, necessary joints, elbow joints & expansion joints and bends, fire barrier at each floor, provision of tapping at every meter, adopter box and copper flexible for joints, continuous earthing with 2 Nos. aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required
-
-
-
1250 A, Isc = 50 kA for 1 second
295
4149765
14067
2000 A, Isc = 50 kA for 1 second
295
5964605
20219
37. LT PANEL FOR ACB (AIR CONDITIONG)
-
-
-
Supply, erection testing and commissioning of L.T Cubical panel indoor type with degree of protection IP–42 as per IS :8623/93 free standing floor mounted dust and vermin proof suitable for 3 phase & neutral 415 volt 50Hz AC supply system fabricated from cold rolled sheet steel of 2mm thick for frame work, enclosure and doors, 3 mm thick for gland plates with stiffeners wherever required, & M.S Channel of size 100mm x 50mm x 5mm at the base and M.S flat of suitable size (horizontal/ vertical construction) in single piece for single supply having separate fully compartment aliased and front and back side open able doors for each switch/ BBC etc. Each door would be vermin/ dust proof. The panel shall be nicely painted after powder coated superior quality paint after degreasing and phosphate treatment. The panel should be marked with the incoming and outgoing feeder. The panel is to be installed at site by marking suitable arrangements and should be bonded to the existing earth with the help of spring washer’s thimbles etc. to secure firm contact. The job includes main inter connections (duly tape) with solid aluminium bars of requisite cross section capable of taking full load current between each ACB/ Bus Bar’s/ MCCB’s / Contactors etc. All the incoming and outgoing cable connections should be made at the back and front as per site requirement. The cubical Panel should have removable gland plates for incoming and outgoing cables duly crimped with dowels lugs/thimbles and provided with PVC tape at each end. The bus bar should be supported on epoxy insulators of suitable length confirming to relevant Indian standard (CPRI) and sufficiently robust to effectively with stand Electro mechanical stresses produced in the event of short circuit. The job includes all material labour and carriage of panel to the site testing and commissioning as required to complete the job as per drawing of panel to the satisfaction of the Engineer in charge. The provision of cable alloy should be both side of the panel. The job includes the making connection of the outgoing cables with lugs / thimbles duly crimped and making connections. The depth of the LT panel shall have 1000 mm. The manufacturer/ fabricator of LT panel should posses type test certificate/ reports w.r.t. construction/ manufacturing of LT panel confirming to IS: 8623/93 with breaking capacity 50KA (minimum) & Degree of protection IP54 (minimum) from CPRI /ERDA approved Lab. The L.T. Panel shall have suitable for installation for 1250 and 2000 amp 65KA MDO type ACB as per site requirement. The job includes the cost of LED phase indicating lamp of make Siemens / Teknic / L&T / BCH / ABB for each ACB as required to the entire satisfaction of EIC.
6
266820
44470
38. S/I/T/C of 4 pole 415V MDO ACB with moulded case construction having breaking capacity 65KA with Ics = Icu =Icw(1sec)=65KA with microprocessor based releases. The ACB‟s shall be provided with the following features in Microprocessor based releases. Overload protection. Short circuit protection. Instantaneous protection. Earth fault protection. Neutral overload. Under voltage and over voltage. Under current. Reveres power. Under frequency and over frequency. Release should have inbuilt current, voltage Power & energy metering. Release should have 10 trip history & 10 event record. Release should be self-powered. LED display for indication of each of over load, short circuit and earth fault. Release should be ZSI (Zone selective interlocking) and communication capable. Pre overload and pre- earth fault alarm indication contact Circuit breakers shall be designed to ‘close’ and `trip' without opening the circuit breaker compartment door. The operating handle and the mechanical trip push button shall be at the front of the breakers panel. ACB should be able to carry Rated current at ambient temperature of 50C. Neutral should have 100% phase current carrying Capacity. Minimum 4 NO and 4 NC auxiliary contacts shall be provided in the breaker. All current carrying parts shall be silver plated and suitable arcing contacts with proper arc chutes shall be provided to protect the main contacts also the ACB should have terminal adapter for incoming and outgoing connection. Make of the ACB: - Schneider Master pact NW / Siemens 3 WL / L&T U-Power / ABB E-Max/Hager Hw / Legrand (DMX3) make only.
-
-
-
1250 Amp. 4 pole 65 KA ACB (MDO) with microprocessor releases
2
406000
203000
2000 Amp. 4 pole 65 KA ACB (MDO) with microprocessor releases
2
435760
217880
39. DSR5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
4
17308
4327
40. DSR5.9 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm)
80
6800
85
41. Labour charges for dismantling the Existing Electrical installation.
-
-
-
i. Light Point / Fan / Bell point with conduit
2160
32400
15
ii. Wall Socket Point with conduit
550
11000
20
iii. 2x40 Watt M/O fitting
350
3500
10
iv. 3x36 sq type fitting
600
7200
12
v.2x28/2X40 Watt box type /T-5 fitting
110
1100
10
vi.1x14 Watt T-5/1X209Watt box type fitting
200
2000
10
vii.AC ceiling fan
100
1500
15
viii.Wall FAN 16’’
100
1000
10
ix.Exhaust Fan 12/15/18’’
180
1800
10
x.MCB’s Single Pole
100
100
1
xi.MS/CI Box of size 8x12/9x4/7x4
450
2250
5
42. IT/TELEPHONE WORK Supply & installation of under floor raceways of PVC rectangular sections of following sizes inclusive of cutting, chasing & refinish with cement plaster in PCC/IPS flooring. (Civil work excluded) make Legrand / MK (Honeywell) / OBO (Bettermann) / Hager / Schneider make only as required to complete the job to the entire satisfaction of EIC
-
-
-
1 run of 90 mm x 35 mm x 2 mm thick.
50
16500
330
2 run of 90 mm x 35 mm x 2 mm thick.
50
32750
655
3 run of 90 mm x 35 mm x 2 mm thick.
10
9750
975
43. DSR item No. 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
25 mm
1000
69000
69
32 mm
50
4450
89
44. supply & Installation of the following sizes of Heavy Gauge Flexible PVC conduits from the under floor junction box/ Trunking to outlet boxes in the tables/blocks fixed on walls/ceiling / timber partitions 25 mm diameter Flexible
500
35000
70
45. DSR item No. 1.53 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.1 run of cable
2000
68000
34
46. DSR item No. 1.18 Supplying and drawing following pair 0.5 mm dia. FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.4 Pair
4000
112000
28
47. DSR 1.17 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.3 x 2.5 sq. mm
150
11250
75
48. DSR 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
1 or 2 Module (75 mmX75 mm)
20
3500
175
4 Module (125 mmX75 mm)
10
2050
205
6 Module (200 mmX75 mm)
5
1290
258
8 Module (125 mmX125 mm)
5
1485
297
49. DSR 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
5/6 A switch
10
840
84
15/16 A switch
10
1140
114
3 pin 5/6 A socket outlet
10
810
81
TV antenna socket outlet
50
4850
97
Telephone socket outlet
60
5760
96
50. DSR 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
1500
43500
29
51. Supply & fixing of Computer jack & contact one module RJ45 of MK / ABB/ Legrand / Schneider make only (as approved by client department) including making connection etc. as required to complete the job to the entire satisfaction of EIC.
30
10290
343
52. Supply & laying of jelly filled armoured telephone cable in duct / on surface as per site requirement. The job includes termination of telephone cable on the both end in the MDF box. The job also includes the cost of making connection testing commission etc as required to the entire satisfaction of engineer in charge. The cable should be of Polycab / Delton/ Finolex / KEI make only.
-
-
-
50 pair
1200
505200
421
10 pair
1200
238800
199
53. S/E of various sizes MDF box with 25 IPM. The MDF box should be of KRONE (GERMAN) or its equivalent D-LINK / AMP / ITL makes only. The box shall have ten no drone and each Krone having ten terminals for terminating the incoming and outgoing signal cables. The job includes labor, petty material required and testing commissioning etc. to the satisfaction of Engineer-in-Charge.
-
-
-
50 pair
10
50500
5050
10 pair
30
56670
1889
54. Supply and erection of G.I. trunking with provision of front door open able made out from 1.6 mm thick sheet steel of various sizes to be installed on surface/ hanging vertical/ horizontal on existing wall / roof surface as per site requirement. The job includes the cost of petty material required to install the G.I. Trunking to the entire satisfaction of engineer in charge.
-
-
-
300X300X30mm
300
219300
731
150X150X30mm
300
152400
508
55. REMOVING EXISTING SERVICES
-
-
-
Removing of existing data & telephone cable in corridor on all levels without conduit
6000
30000
5
Removing of existing wiring with conduits in corridor on all levels
10000
100000
10
Removing & re-crecting of existing TV dish antenna from facades, etc
20
10000
500
Removing & resifting/re-erection of existing IT racks with switches etc. & cat 6, fiber cabling, etc. the job includes all labor, re programming the switches & petty material required to complete the job to the entire satisfaction of EIC.
20
60000
3000
Removing and resifting/re-erection of existing panels, cable on terrace on block 6
6
2400
400
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements