Military Engineer Services Tender
BidAssist is a very user-friendly website that helps us to explore all the new opportunities so as to achieve growth in our business. It helps us to attain all the information with respect to any e-tender the Arunachal Pradesh government has posted on its website in a very hassle-free manner.
Military Engineer Services - MES Tender
Eprocure
Opening Date
16 Oct 2019Closing Date
6 Dec 2019Tender Amount
₹ 20,00,000Costs
EMD
₹ 40,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_MES_290203_1Bid Award Id
ViewTender No
8455/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
All as per Item No 3 above but as in skirting.
2
-
-
Material & labour for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundations, fillings and Mass concrete Demolition of PCC in ground floors and pavings exc 15cm thickness including WC but above ground level complete all as specified and as directed.
1
-
-
Demolition cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as directed.
3.05
-
-
Material and labour for 10mm thick cement plaster in CM ( 1:4)mixed complete as specified and as directed.
14.1
-
-
Material and labour for filling of broken Bricks in floors or pavings, laid in layers n exc.15cm thick , spread, levelled and blinded with earth and rammed including watering complete all as specified and as directed.
1.14
-
-
Material and labour for 150 mm thick cement concrete B-0 , 1 :2: 4 ( 12.5 mm) graded aggregate in sub floor including 3% wpc of cement complete all as specified and as directed.
7.63
-
-
Material & labour an elastic liquid applied , crack bridging 2 pack acrylic polymer modified cementitious water proofing coating system primer coat Sika Top Seal - 109 hi Primer consumption primer coat 0.2 kg/sqm ,Base coat Sika Top Seal - 109 hi consumption base coat 0.7 kg/sqm Top coat Sika Top Seal - 109 hi consumption primer coat 1.5 kg/sqm Density 1.6 kg/ltrbond strength 2.0 N/mm OR Nitco Proof 100 & 120 of M/s Fosroc chemical ( priming coat of Nitoproof 100 & one susequent coat of Nitoproof 120 ) all as per manufacturing instruction. Note:(i) This item is applicable for sunken portion .
(ii) Contractor shall arrange the applicator of the firm who will carriedout the said treatment on ground. Hence work against this item shall be carriedout from the manufacturer and unit rate of this item is also includes this element.
(iii). Nothing extra is admissible on account of any misunderstanding.
8
-
-
Dismantling wall and celling board (fibre, pulp, insulation etc) any thickness including cover fillets complete all as specified and as directed.
20
-
-
Supply and Fixing for Anodised aluminium snap grid of Size (600X600)mm' frame work for false ceiling complete all as specified and directed.
20
-
-
Supply and Fixing HPSC 6 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework as in Ceiling with including proper hanging arrangement complete all as specified and directed.
20
-
-
Material and labour for rendering 20 mm thick in two layers (12mm + 8mm) externally on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surface even & smooth without using extra cement mixed with and including water proofing compound @ 2% on top layer of 8mm thick and Taking down cement plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
Note: Water proofing compound shall be measured and paid separately under relevant item
50
-
-
Supply only integral water proofing compound
11
-
-
Material and labour for preparation of platered or unplastered surfaces of wall and applying Two coats of exterior emulsion paint (weather coat) over a coat of primer in any shade or colour as approved complete all as specified and as directed
50
-
-
Material and labour for complete removal of existing treatment, including preparation of platered or unplastered surfaces of wall and applying two coat of exterior emulsion paint (weather coat) over a coat of primer in any shade or colour as approved complete all as specified and as directed.
100
-
-
Material & labour or painting one coat of synthetic enamel paint on previously painted steel surfaces of any descriptaion not otherwise described over 10cm width or girth with including preparation of old decorated surface complete all as specified and as directed.
150
-
-
Material & labour or one coat of white wash on ceiling including preparation of old decorated surface complete all as specified and as directed.
150
-
-
Taking down chowkhats or frames with shutter (without taking off shutter from the frame) not exe 1.50 Sqm in each complete all as specified and directed.
3
-
-
Supply and fix solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube complete all as specified and directed
10
-
-
Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.
3
-
-
Material and labour for PCC 1:3:6, C-1 (using 20 mm graded stone aggregate) as in bed blocks for inserting holdfast, etc including necessary form work complete all as specified and directed.
0.25
-
-
Supply and fix for 100mm Butt hinges, extruded aluminium long alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges complete all as specified and as directed.
9
-
-
Supply and fix 150 mm long Aluminium anodised barrel tower bolts of extruded section all as specified and directed.
6
-
-
Supply and fix 150 mm size Aluminium handles, cast type, anodised all as specified and directed.
6
-
-
Supply and fix in repairs anodised aluminium frame for window with one or more rebates, anodised aluminium window, sliding type shutters, sliding on two way aluminium channel, without sash bars, sliding on separate track, made out of aluminium section weighing 0.55 Kg/RM and necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, fittings such as suitable anodised aluminium locking type handle etc and fixing of 4.00 mm thick tinted glass, complete all as specified and directed.
3
-
-
Supply and fix in repairs anodized aluminium frame for door with anodized aluminium push/pull glazed type shutters with lock rail made out of aluminium section 65 x 38 mm for frame 80 x 45 mm for stiles 80 x 45 mm for top rail and 115 x 45 mm for bottom rails and necessary jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium handles,lock and keys including supply and fixing of 5 mm thick sheet glass, tinted, complete all as specified and directed.
3
-
-
Supply and fix in repairs Door closer hydraulically regulated aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.
4
-
-
Supply and fix in repairs aluminium anodised grill, 3 to 5 mm thick made in diamond shape mesh of size 65 x 65 mm complete as specified and directed.
10
-
-
Supply and fix for 4 mm thick tinted sheet glass, ordinary quality and glazing with rubber bead exc 0.5 Sq.m in each pane including hacking out broken glass complete all as specified and directed.
5
-
-
Supply and fix in repair Wash Hand Basin 550x400mm, vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.
4
-
-
Supply and fix in repairs, Vitreous China wash down water closet pan EWC (pedestal pattern), white with plastic seat cover including fixing bolt & making good damaged portion complete as specified and directed.
8
-
-
Supply and fix in repairs 10 litres capacity PVC valve less syphonic action type, flushing cistern, low level with inlet ball valve and bracket etc, complete all as specified and directed including taking out old one complete all as specified and directed.
8
-
-
Supply and fix in repairs, 15mm bore, PVC connecting pipe 450mm long with PTMT nuts at both ends complete all as specified and directed.
20
-
-
Supply and fix in repairs Vitreous China Urinal flat back size (465x355x265) mm white (minimum) , with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, complete all as specified and directed.
2
-
-
Supply and fix in repair 50 mm bore ,low density polyethylene pipes (LDPE) of pressure rating 6 kg of cm2 in waste pipe for WHB and sinks, complete all as specified and directed.
20
-
-
Supply and fix in repair Waste Coupling (PTMT) 38/40 (F/T)
5
-
-
Supply and fix in repairs, 15 mm bore, bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete complete all as specified and directed.
8
-
-
Supply and fix in repairs 15 mm bore, Stop valves, cast copper alloy, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
8
-
-
Supply and fix in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe etc complete all as specified and directed.
5
-
-
Supply and fix in repairs chromium plated brass angle valve suitable for 15mm bore pipe,complete all as specified and directed.
10
-
-
Supply and fix in repairs CP brass shower rose 125mm size suitable for 15mm bore pipe complete all as specified and directed. .
5
-
-
S&F in repair 15mm bore CP Brass Wall mixture for mixing hot and cold water screwed down for iron pipe and fixed Non telephonic type complete all as specified and directed.
2
-
-
Supply and fix in repair 15mm bore CP Brass WHB mixture for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.
2
-
-
Supply and fix in repair brass CP tubular towel rail 20mm dia D type 60cm long between flanges complete all as specified and directed.
5
-
-
Supply and fix in repair CP jet for EWC with 1m long connection pipe and necessary fittings complete all as specified and as directed by Engr-in-charge
4
-
-
Supply and fix Grating doom 150 mm dia PTMT complete all as specified and directed
8
-
-
Supply & fixing 500 litres capacity rotational moulded polythene water storage tanks (cylindrical vertical, with closed top), hoisted and fixed in position as specified in SSR Part I complete and including Dismantling water tank complete all as specified and as directed.
2
-
-
Supply & fixing 1000 litres capacity rotational moulded polythene water storage tanks (cylindrical vertical, with closed top), hoisted and fixed in position as specified in SSR Part I complete and including Dismantling water tank complete all as specified and as directed.
1
-
-
Supply and fix in repair 20 mm bore ball brass valves high pressure, with polythene float & fly nuts complete, screwed for iron pipe or brass ferrule complete all as specified and directed.
5
-
-
Supply and fix steel tubes, galvanised 15 mm bore, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc and taking up or down 15mm dia steel tubing & connection complete as specified and directed .
40
-
-
Supply and fix steel tubes, galvanised 20 mm bore, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc and taking up or down 15mm dia steel tubing & connection complete as specified and directed complete as specified and directed .
20
-
-
Material & labour for taking out sludge from septic tanks/sewage sumps /manholes etc and removing the same to a distance n exc 50 m away from starting point and depositing in pits n exc 10 sqm on plan and n exc 1.5 m in depth covered by ordinary soil to thickness not less than 30 cm from existing ground level including sprinkling of bleaching powder over the area of trenches and on the cleared septic tank and incl necessary exc and earth work in soft/loose soil (Volume of sludge in pit shall be measured) .
75
-
-
Bailing out waste water from septic tank/sludge chamber/soakage well up to top of sludge /broken brick media using sewage pump/by manual and disposal of the same to a distance n exc 50 m away from starting point and depositing in pits not exc 10 sqm on plan and n exc 1.5 m in depth, returning filling in of pit after soaking of water including sprinkling of bleaching powder over the trenches and incl necessary exc and earth work in soft/loose soil complete.
80
-
-
Cleaning of sewage line/pipe by rodding in to manhole suitable method to clear the sludge/blocking etc logged in side the sewage line and well flushing with water to drain the loose sludge etc inside the sewage line from manhole to manhole including removing and re-fixing the manhole cover 100 mm size all as specified and directed
200
-
-
All as per item 56 here-in-before but in size 150 mm
50
-
-
All as per item 56 here-in-before but in size 200 mm
50
-
-
Cleaning of WC/kitchen /bathroom NT by taking out blocked wastes/silt and mud, including removal and washing down thoroughly for free flowing complete all as specified and directed.
20
-
-
Excavation in trenches not exc 1.5m wide and not exc. 1.5m depth in Hard/dense soil for foundations etc or manholes etc and getting out complete all as specified and directed.
25
-
-
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm complete all as specified and directed by Engr-in- Charge.
19
-
-
Removing excavated material not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.
6
-
-
M&L for salt glazed stoneware drain pipe 150 mm internal dia grade 'A' laid in trenches and jointed and tested as specified and concrete bed to drain pipes 150 mm dia in cement concrete. 1:4:8 type D-2 including . packing under and haunching against sides of pipes including Demolition and breaking up drain pipes 150mm dia complete all as specified and directed.
10
-
-
Material & labour for Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc of 250 to 500 ltrs capacity tanks incl disconnecting existing tanks, setting aside ( or lowering if required) for repair, cleaning, etc including washing the tanks and draining out dirty water complete all as specified and directed.
6
-
-
All as per tiem No 64 above but1000 ltrs to 2000 ltrs capacity PVC water tanks complete all as specified and directed.
4
-
-
Dismantling structural steel work including doors, gates but excluding framed truss etc.complete all as specified and directed.
0.5
-
-
Material & labour For Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; including portions framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc con- forming to Fe.290.Gde-E-165 complete all as specified and directed.
50
-
-
Material & labour for painting two coat of synthetic enamel paint on new steel surfaces of any descriptaion not otherwise described over 10cm width or girth with including red oxide primer complete all as specified and directed.
200
-
-
M&L cutting pot holes of existing PCC pavements to a depth of 25mm to 36mm made into shape, cleaning the cut portion with hard brushes, water under pressure and drying with compressed air etc complete and removing all foreign materials to a distance exceeding 100 mtr but not exceeding 250 mtr, filling the portion with epoxy resin mortar (1:5) one part of epoxy and five parts of quartz sand after priming with epoxy resin primer complete all as per manufacturers instructions complete all as specified and directed.
2.5
-
-
Repair to pot holes /pin holes in existing rigid pavement of dispersal /Runway /PTT ,dept upto 15mm and area not exc. 225 Sqmm , cleaning the pot hole with hand brushes ,water under pressure and drying with compressed air etc. filling the pot holes with epoxy mixture of araldite and hardener, araldite 02(Two) parts and hardener 01 (one) parts complete all as specified and directed.
50
-
-
Repair to pot holes / pin holes area exc 491 sqmm but not exc 1963 sqmm in flexible pavements / runway / PTT with Dense Asphaltic Concrete (DAC) using Polymer Modified Bitumen (PMB-70) as per design mix including applying tack coat (PMB-70) @ 5 kg/ 10 Sqm, cutting as required shape and size, depth 30 mm, cleaning, consolidating and ramming complete all as specified and directed.
50
-
-
Material & labour Preparing of old painted surfaces of rigid pavement (concrete or asphaltic base) of runway, Taxi Track line and applying one coat of aqua base acrylic paint as line (centre line / dashes / arrows / figures etc ) width or girth exceeding 10 cm complete all as specified and as directed.
550
-
-
M & L Preparing old painted surfaces of rigid pavement (concrete or asphaltic base) of runway and Taxi Track link, Tarmac or like and applying one coat of water based runway marking paint as per manufacturer's instruction (white / golden / yellow / orange ) as lines / dashes / letters etc. width or girth exceeding 10 cm complete all as specified and as directed.
11510
-
-
All as per serial item No 73 here - in - before but surfaces not exc 10 cm width or girth
50
-
-
Material and labour for preparation of old decorated surfaces of plastered surfaces and applying One coat of synthetic enamel paint exc 10 cm width or girth all as specified and as directed.
200
-
-
Material & labour Preparing old surfaces of rigid pavement (concrete or asphaltic base) of runway and Taxi Track link, Tarmac or like and applying two coat of water based road marking paint as per manufacturer's instruction (white / golden / yellow / orange ) as lines / dashes / letters etc. width or girth exceeding 10 cm complete all as specified and as directed.
50
-
-
Material & labour racking out sealant from expansion joint of size 20-23mm wide and 20 mm deep including taking out compressible fillar back up rod cleaning the surface by brushing for complete removal of sealant from concrete surface, washing, cleaning with pressure pump mechanical driven etc. drying up the joints putting in closed cell, medium density, cross linked polyethylene foam backup rod of dia 25mm applying one coat of approved primer and filling with polyurethane base sealant, applying making taps on edges of joints to prevent accidental spillage of sealant and removing the marking tape after sealant is applied as per manufacturer’s instruction complete all as specified and as directed.
200
-
-
M&L racking out sealant from dummy/ construction joint of size 10-12mm wide and 10 mm deep including taking out back up rod, cleaning the surface by brushing for complete removal of sealant from concrete surface, washing, cleaning with pressure pump mechanical driven etc. drying up and applying one coat of approved primer and any thickness putting in closed cell medium density, cross linked polyurethane from back up rod of 12 mm dia filling with polyurethane base sealant, applying masking taps on edges of joints to prevent accidental spillage of sealant and removing the masking tape after sealant is applied as per manufacturer’s instruction complete all as specified and as directed.
180
-
-
Supply and fix in repair sign board of size 1.96 x 0.80 m made out of 12 mm thick celluka ply including pasting of retro reflective sheet of high intensity grade type -iv on celluka ply, letters and arrow are made up of vinyl sheet on retro reflective sheet,the size of letter shall be of 40 cm height and width 26 cm or as proportionately ,three nos post for the board shall be made up of PVC sheet 1.22 metres height,36 mm width and 50 mm thick, two single sided lettering boards shall be fixed on both sides of post to form a composite both sided single unit including solvent adhesive and screwing and nailing for joint purpose ,board shall be covered from top using 5 mm thick PVC Foam sheet ,the material shall be of fire proofing, flexible to bear wind pressure and fragile in case of collision including necessary excavation ,grouted in pcc 1:3:6: type C2(30 cmx30 cmx30cm) letter in alternate board as(A to Z or 1 to 10) -both side with arrow of 40 cm long including dismantling and taking out old existing board complete all as specified and as directed.
1
-
-
All as per item No 79 here in before but size of board 1.00 x 0.90 m Red background with white letters having alphabet "STOP LOOK OUT AC PROCEED".
1
-
-
Demolition of precast concrete articles precast concrete block walling, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed complete all as specified and as directed.
3
-
-
Supply & fixing precast cement concrete 1:2:4,type B-1 (using 20 mm graded stone aggregates) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in cement mortar 1:4 in walls , including rendering 15 mm thick in CM 1 : 4 on any faces of brick work or concrete surfaces,finished even and smooth without using extra cement complete all as specified and as directed.
30
-
-
Demolition of unreinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
5.45
-
-
Material & labour for PCC (1:4:8) type D2 40mm graded stone aggregate in foundations, fillings and Mass concrete complete all as specified and directed.
3
-
-
Material and labour for 40 mm thick, plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floors and finishing the surface even and smooth using extra cement complete all as specified and as directed.
25
-
-
Taking out waste material silt and mud from drains , channels, culvert bed and removal of waste material mud/silt to suitableb place n. exceeding 50 Mtrs away from the starting point and deposited where directed at a level n.exc 1.5 Mtrs as direccted by Engr-in -Charge including cleaning thoroughly drain and channel bed for free flowing of water complete all as specified and directed..
220
-
-
Surface dressing/ cleaning vegetation of vertical side and berms of drain by trimming of surfaces and removing all vegitation bushes/ smalll tree n exc 30 cm girth and removing to a distance not exc 50 metres and deposited where complete all as specified and directed.
5100
-
-
Material & labour for salt glazed stoneware drain pipe 300 mm internal dia grade 'A' laid in trenches and jointed and tested as specified and concrete bed to drain pipes 300 mm dia in cement concrete. 1:4:8 type D-2 including . packing under and haunching against sides of pipes including Demolition and breaking up drain pipes 300mm dia complete all as specified and directed.
7
-
-
E/M Portion
Supply only calcium hypochlorite 65% to 70% chlorite granules manufactured by M/S Sree Rayalaseema Hi- Strength Hypo Ltd, Kurnool (AP) of "Aquafit/ pure
180
-
-
Supply only poly aluminium chloride powder (raw water flocculant powder) Make : Vikrampac/Kalpac/Aditya Birla
100
-
-
Supply only graphite gland packing of size 6mm to 20mm for use in pumps & sluice valves.
1
-
-
Material & labour in repairs lightning arrestor expulsion type suitable for 11000 Volts complete with all fittings, transmission class, discharge capacity 65 Kilo amp complete all as specified and directed.
1
-
-
Overhauling and servicing Altoch machine chlorination equipment including replacement of Oil Seal, Head screw, spacer, small spring, spring retention, diapharam, transformer, outlet and inlet nozzle, shaft and electronics pulsar unit and re-assembling, installing, connecting commissioning and testing complete all as specified and as directed.
1
-
-
Material & labour for earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead GI Strip 32x6mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion, complete all as specified and directed.
8
-
-
Material & labour cleaning of under ground sump 26000 Ltr by pumping out entire water and bailing out left out mud/sludge water from the bottom of the sump floor and scrapping out of internal wall/floor/roof of entire sump and brooming out all sedimentation if any by bailing out manually, three coats of white wash internal/external wall/floor/roof of entire sump and writing of sump capacity and cleaning date on black painted background with white paint of suitable letter size complete all as specified and directed.
1
-
-
Material & labour painting of two pole structure complete with two coat of aluminim apint over a coat primer after scrapping out old paint surface including cross arms/ channels, clamps, nuts/bolts, GOD frame/channels, operating rod including arrangement of safety belt, earth rod, ladder for working person at site all as directed after taking proper HT shut down locally from MES manning staff/JE icomplete all as specified and directed.
1
-
-
Supply and fix in repair of cable jointing kit for 11 KV (earthed) grade cable for straight through heat shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 185 Sqmm X 3core complete all as specified and directed.
1
-
-
Material & labour for XLPE cable of size 70 Sqmm ,3.5 core insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade in trench/on poles and wall including suitable handware accessories, connecting up, testing and commissioning and including taking down old unsv cable complete all as specified and directed.
Note : Excavation and earth work shall be measured and paid for separately. However taking out the old bricks/cable protection cover are included in the excavation and earth work and shall be measured alongwith excavation and earth work.
40
-
-
All as per Srl item No 98 here-in-above for cable of size 16 Sqmm 2 core
40
-
-
All as per Srl item No 98 here-in-above for cable of size 16 Sqmm 4 core
40
-
-
All as per Srl item No 98 here-in-above for cable of size 25 Sqmm 3.5 core
50
-
-
Material & labour for locating fault in 11 KV UG cable with help of fault locating machine/ vehicle by injecting necessary high voltage to fault cable complete all as specified and directed.
2
-
-
Material & labour for locating fault in 1.1 KV UG cable with help of fault locating machine/ vehicle by injecting necessary low voltage to fault cable complete all as specified and directed.
2
-
-
Materials and Labour scrapping the existing surfaces of LT steel tubular poles, type 410 SP-31 (9 Metres long) including cross arms, bracings, clamps etc and applying two coat of aluminium paint including Writing Pole No with Black Paint as S/S- X/Y complete all as specified and directed. (S/S - X for Sub Stn No & Y for Pole No under S/S - X) complete all as specified and as directed.
15
-
-
Materials and Labour scrapping the existing surfaces of HT steel tubular poles, (11 Metres long) including cross arms, bracings, clamps etc and applying two coat of aluminium paint including Writing Pole No with Black Paint as S/S- X/Y complete all as specified and directed. (S/S - X for Sub Stn No & Y for Pole No under S/S - X) complete all as specified and as directed.
5
-
-
Material & labour fine dry river sand cushioning to underground cable with a layer of sand of 8cm thick before laying of cable and 15cm thick after laying of cable to full width of trenches,complete all as specified and directed.
2
-
-
Material & labour burnt bricks sub class `B’ bricks of size 230 x 115 x 75 mm in trenches for cable protection complete all as specified and directed
1200
-
-
Material & labour Servicing of RO plant any type and size by replacing candle, washer, tap, PVC pipe , elect wire, Plug top etc all as required for smooth functioning of water supplycomplete all as specified and directed.
5
-
-
Material & labour comprehensive maintenance including minor repairs and replacement of gasket set, cleaning engine head, piston with ring, cleaning of fuel tank and replacement of minor parts of DG set of capacity 320 KVA acoustic type AMF pnael by local OEM including the following works at site :- (i) Replacement of fuel filter dual type-01 Set.
(ii) Replacement of oil filter-01 Set.. (iii) Cleaning and refixing of air filter complete-01 Set. (iv)Checking of serviceability of turbocharger complete-01 Set.
(v) Checking of battery lead serviceability and repl of battery terminal clamp (Brass)=04 Each. (vI) Checking of alternator terminal box output lead connectors for its proper fixing/tighteniness & correct voltage. (vii) Checking of contactor auto/mannual operation mode in AMF panel and testing of DG set complete for its proper functional all as specifed and as directed by Engr-In-Charge. (viii) Engine Oil-30 Ltrs (Ix) Coolent 5 Ltrs (x) Distilled water-10 Ltrs
2
-
-
All as per item No109 here-in-before but DG Set of capacity 35KVA, 440 Volt, 50 Hz but Engine oil-12 Ltrs, Coolent-2Ltrs and Distilled water-02 ltrs.
1
-
-
All as per item No109 here-in-before but DG Set of capacity 15KVA, 440 Volt, 50 Hz but Engine oil-5 Ltrs, Coolent-1Ltrs and Distilled water-01 ltrs.
1
-
-
Disconnections of electric connection of pumping Set, lifting and removing motor form its existing foundation to the location (inside/outside of buildings) where directed by the Engineer-in-charge, dismantling the motor carefully, checking. Segregating serviceable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Part like water seal, bearings, fan and caacity etc) heating,drying and varnishing including replacement of burnt windiwng with super enameled copper wire of existing gauge and good quality of insulating materials including replacement of unservicealbe parts as required (expect those mentioned in supply only items here-in-after as the same is measured and paid separately) re-assembling the motor including painting with two coats of synthetic enamel paint after necessary surface preparation, making number (SM, MES and Srl No) installing to its existing foundation, commissioning, connected up and testing complete as directed for the monoblock pump, 5 HP motor, Three phase, 415 volt complete all as specified and directed.
1
-
-
Supply only bowl assembly
1
-
-
Supply only Stainless steel bush
1
-
-
Supply only thrust bearing
1
-
-
Supply only neck ring gun metal
2
-
-
Supply only Rubber bush
2
-
-
Material & labour Dismantling submersible pump of capacity 5 HP multistage complete, checking and segregating serviceable/ unserviceable parts, cleaning serviceable parts thoroughly by applicable method, replacement of worn out unserviceable parts with new one and necessary machining if required like suction cage ,pump shaft, discharge case assembly, bowl assembly etc., and re-assembling the pump set complete ,including testing at site complete after assembling with motor for its entire satisfactory serviceability all as directed and specified for the submersible pump (only).Pump set Make:KSB Note: Spare parts shall be measured and paid seperately under relevant items.
1
-
-
Supply only neck Ring
1
-
-
Supply only G M Bush
1
-
-
Supply only pump Key
1
-
-
Supply only SS Sleeve
1
-
-
Supply only pump Cap
1
-
-
Supply only copper washer for pump
4
-
-
Supply only nut and bolt/ stud for bowl
2
-
-
Material & labour Servicing/overhauling of Self Starter 12 volts by replacing armature/field coil/bushes/bearing/rivets etc all as required for smooth functioning of alternator of the DG Set 320 KVA, testing all as specified and directed
(i) Cost of small spares required for maint of alternator shall be deemed to be included in the unit rate quoted.
(ii) Major Spares required to be replaced shall be measured and paid separately under relevant items.
(iii) Spares replaced shall be guaranteed for one year.
(iv) After repair, alternator shall be tested and cost of testing is included in the unit rates of the items.
2
-
-
All as per Srl No 126 here-in -before but for DG Set 35 KVA
1
-
-
All as per Srl No 126 here-in -before but for DG Set 15 KVA
1
-
-
Material & labour repair / overhauling of Engine Alternator 12 volts by cleaning of and replacement testing all as specified and directed.
(i) Cost of small spares required for maint of alternator shall be deemed to be included in the unit rate quoted.
(ii) Major Spares required to be replaced shall be measured and paid separately under relevant items.
(iii) Spares replaced shall be guaranteed for one year.
(iv) After repair, alternator shall be tested and cost of testing is included in the unit rates of the items.
2
-
-
Supply only rectifier set for alternator 12 volt.
2
-
-
Supply only armature for self starter 12 volt.
2
-
-
Supply only field coil for Self starter 12 volt.
2
-
-
Supply only carbon bush for self starter 12 volt.
2
-
-
Supply only solenoid switch 12 volts.
2
-
-
Supply only rocker plate assembly 12 volts.
2
-
-
Supply, fixing and testing as in repairs lead acid battery of capacity 12 volts, 180 AH with one set of battery terminals for connection complete all as specified and directed.
Note :- : Old unserviceable lead battery shall be desposited in MES/E&M store yard by the contractor and cost of transportation charges are included in the unit rates of the items.
2
-
-
Supply and fix in replacement of New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED light of 45W including making connection complete all as specified and as directed.
12
-
-
Supply & fixing in replacement New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium roadway luminaire with high power LEDs light 24 Watt ,6000K source and electronic driver including making connection complete all as specified and as directed.
12
-
-
Supply and fix as in repairs CFL 11 Watt 2 pin complete all as specified and directed.
10
-
-
Supply and fix as in repairs LED Bulb 9 Watt retrofit type complete all as specified and directed.
25
-
-
Supply and fix as in repairs modular switch one way 6 Amp ,1 module, complete all as specified and directed.
5
-
-
Supply and fix as in repairs modular switch one way 16 Amp ,1 module complete all as specified and directed.
5
-
-
Supply and fix as in repairs modular socket 6A/16A, 2/3 pin combined 2 module cpmplete all as directed.
5
-
-
Supply and fix as in repairs step type regulator for fan, 120 Watt -2 modile complete all as specified and directed.
3
-
-
Supply and fix as in repairs PVC insulated 1100 Volts, FR grade electric cable, twin core with copper conductor for working voltage up to and including 1100 volts of size 2.5 sq.mm from loop in box to fitting complete all as specified and as directed.
100
-
-
Supply and fix as in repairs MCCB ,4 POLE, 415 V, 100A (16 KA) complete all as specified and directed.
2
-
-
Supply and fix in repair On load changeover switch 4 pole 100A, 415V, 50Hz front operated panel mounted, complete with handle assembly complete all as specified and directed.
1
-
-
Supply & fixing steel tubes, galvanised 50 mm bore, medium grade(IS 1239) with all fittings laid in trenches or fixed to wall, ceiling, floor with necessary fixtures complete, including Taking up or down 50mm dia steel tubing & connection complete all as specified and as directed.
12
-
-
All as per Srl item No 148here-in-above for 40mm bore
12
-
-
All as per Srl item No 148 here-in-above for 25mm bore
12
-
-
Supply and fix as in repairs 50mm Gun-metal, globe or Gate Valve with iron wheel head, screwed bothe ends for iron pipe complete all as specified and directed.
1
-
-
Supply and fix as in repairs 40mm Gun-metal, globe or Gate Valve with iron wheel head, screwed bothe ends for iron pipe complete all as specified and directed
1
-
-
Supply and fix as in repairs 25mm Gun-metal, globe or Gate Valve with iron wheel head, screwed bothe ends for iron pipe complete all as specified and directed.
1
-
-
Taking down split type AC 1.5/2 Ton capacity disconnecting necessary connections for carrying out repairs, re-fixing in position, complete testing for satisfactory working conditions and commissioning after completion of repairs by replacing necessary spares complete all as specified and directed. Note : Spares shall be measured and paid separately)
3
-
-
Material & labour servicing / Cleaning of Split Type AC at Installed site by opening the indoor & outdoor units, cleaning of filters , removing of dust, checking of all parts etc complete all as specified and directed.
4
-
-
Material & labour re-winding of fan motor with standard gauge super enamelled copper wire including replacement of bushes, complete servicing and overhauling the motor and re-fixing for out door unit of split type ACs 1.5 / 2 Ton capacity complete all as specified and directed.
2
-
-
Supply only condenser coil assembly complete suitable for 1.5 / 2 ton window/ split type AC.
Make LG,Bluestar,Voltas.
2
-
-
Supply only evaporator coil assembly complete suitable for 1.5 / 2 ton Window / Split type AC Make LG,Bluestar,Voltas.
2
-
-
Supply and install in repair compressor including charging of refrigerant gas, leak testing etc. complete suitable for Split type AC of 1.5 Ton capacity. Make: Techeoms,LG,Voltas,Godrej,carreier.
2
-
-
Supply only Running capacitor 36/45 Mfd 440V AC 50 Hz (Make:uinversal,Tibcon,sarda,)
4
-
-
Supply only Fan motor capacitor 4 / 6 Mfd 440V AC 50 Hz
1
-
-
Supply only Air filter suitable for split /window type AC ,1.5 TR capacity.
2
-
-
Supply only Single pole contactor upto 25 Amps for Split type AC 50/60 Hz 240 V,1.5 TR capacity.
2
-
-
Supply only Two pole contactor up to 40 Amps for Split type AC 50/60 Hz 240 V, 1.5 TR capacity.
2
-
-
Supply only Auxiliary contactor single phase 220 Volts 10 Amps current capacity
2
-
-
Supply only Start Relay (Make:L&T/Legrand/Havells)
2
-
-
Supply only Thermostat (Make:LG/Blue Star/Voltas/Carrier)
2
-
-
Supply & Fix in repair fan motor for 1.5 TR/ 2 Ton capacity split type AC for Out door unit complete all as specified and directed.
2
-
-
Supply & Fix in repair Copper pipe 5 /8" complete with insulation complete all as specified and directed.
3
-
-
Supply & Fix in repair Copper pipe 3 /8" complete with insulation complete all as specified and directed.
3
-
-
Supply and charging refrigerant R-22 complete all as specified and directed.
12
-
-
Material & labour for steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0 mtr long) and inlcuding taking down of old unsv steel tubular pole complete all as specified and directed.
3
-
-
Material & labour for P.C.C (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping including necessary form of work or in any situation all as specified and directed.
0.15
-
-
Taking down carefully copper/aluminium point wiring of (light / fan / Bell / Socket or power Point) complete inclusive of all fittings, removing materials from site and making good the disturbed surfaces of floors / walls / ceiling etc. complete all as specified and directed.
23
-
-
Material & labour for point wiring with 1.5 sq mm PVC insulated and unsheathed multistranded copper conductor cable 1100 volts grade, single core, laid in and including PVC casing and caping complete with all fittings and accessories, fixed to wall / ceiling, including sunk type pressed steel terminal boxes 1.25mm thick all conforming to IS; 5133(part-I) with 3mm thick plastic laminated sheet(hylem) top cover for mounting switches/regulator etc including 1.5 sqmm PVC insulated unsheathed multistranded copper cable 1100 volts grade single core earth continuity conductor connected to common earth dolly for one Light point / one fan point controlled by one switch complete all as specified and as directed.
10
-
-
All as per item No 175 here in before but one light point controlled by two way switches complete all as specified and directed.
1
-
-
All as per item No 175 here in before but One 3/5 pin 5 Amps socket outlet on independent board complete all as specified and directed.
5
-
-
All as per item No 175 here in before but wiring with 1.5 Sqmm for one 3 pin 5 amps socket outlet on same board.
3
-
-
All as per item No 175 here in before but One Bell /Buzzer point controlled by one way switch complete all as specified and directed.
1
-
-
All as per item No 175 here in before but with using copper conductor of 2.5 Sqmm for one 3/5 pin socket outlet 15 Amps on independent and using 1.5 Sqmm copper conductor as earth continuty cable compete all as specified and directed.
3
-
-
Supply and fix switch piano, flush button, single pole, one way, 5 amps, complete all as specified.
18
-
-
Supply and fix switch piano, flush button, single pole, two way, 5 amps, complete all as specified.
1
-
-
Supply and fix Bell Push, flush button, single pole, One way, 5 amps, complete all as specified.
1
-
-
Supply and fix socket out let 2/3 pin 5 amps, flush type, complete all as specified and as directed.
8
-
-
Supply & fixing socket out let 2 in 1, 3 pin, 5 & 15 Amps, flush type universal complete all as specified and as directed.
3
-
-
Supply and fixing ceiling rose, surface bakelite, three terminals, 50x65mm complete all as specified and as directed.
9
-
-
Supply & fixing in repair Lamp holder, insulated body, angular type with back plate for batten fittings, complete all as specified and directed.
1
-
-
Supply and fixing bell ding-dong musical AC 230 Volts single pole complete all as specified and directed.
1
-
-
Supply and fix fan regulator electronic type rotary step, 120/280 volts all as per code NO 38660 of make "Anchor" or equivelent model make complete all as specified and directed..
2
-
-
Supply and fix wall mounted LED batten light 20 watt 4000k ,exturded aluminium heat sink provided for eficient heat dissipation & integrated electronic driver complete and connecting up with twin core twisted flexible copper cable of suitable size complete all as specified and directed.
7
-
-
Supply & fixing in repair CFL 36 W in 4 pin, complete all as specified and directed.
10
-
-
Supply & fixing in repair CFL 18 W in 4 pin, complete all as specified and directed.
10
-
-
Supply & fixing in repair CFL 18 W in 2 pin, complete all as specified and directed.
10
-
-
Material and labour for sub main for two single core PVC insulated unsheathed cable 6.0 sqmm (Nominal aera) with multistranded copper conductor cable, 1100 volts grade, drawn into PVC casing capping / conduit with accessories and continious earth wire of single core PVC insulated, unsheathed cable 6.0 sqmm (Nominal area) with ultistranded copper conductor (green), 1100 volts grade for sub main wiring and including taking down old unserviceable sub main wiring of any size and making good disturbed surfaces complete all as specified and as directed.
50
-
-
Material and labour for sub main for two single core PVC insulated unsheathed cable 4.0 sqmm (Nominal aera) with multistranded copper conductor cable, 1100 volts grade, drawn into PVC casing capping / conduit with accessories and continious earth wire of single core PVC insulated, unsheathed cable 4 sqmm (Nominal area) with ultistranded copper conductor (green), 1100 volts grade for sub main wiring and including taking down old unserviceable sub main wiring of any size and making good disturbed surfaces complete all as specified and as directed.
50
-
-
Supply and Fix DB sheet metal enclosure for DBs when MCB to be used for 240 volts, 8 way with 200 amps rated bus bar including earth and neutral link, SP & N double door, and including taking down of old unsv DBs complete all as specified and as directed.
1
-
-
Supply and fix in repair Miniature circuit breaker (MCBs) single pole, 240Volts, 10KA, 5 t0 30 Amps, 'B' curve complete all as specified and directed.
6
-
-
Supply and fix in repair Miniature circuit breaker (MCBs) single pole and neutral, 240Volts, 10KA, 6 t0 32 Amps, complete all as specified and directed.
1
-
-
Supply and fix backalite blanking plate in lieu of MCB's complete all as specified and directed.
5
-
-
Material and labour taking down exhaust fan size 250 to 450mm sweep and painting of exhaust fans complete at site with one coat of synthetic enamel paint by spraying including canopy, down rod after cleaning all dust including writing MES No. in index hands including refixing the fan in its original position at site complete all as specified and directed.
5
-
-
Material and labour taking down ceiling fan of size 1200/1400 mm sweep from site and painting of ceiling fans complete at site with one coat of synthetic enamel paint by spraying including canopy, down rod after cleaning all dust including writing MES No. in index hands including refixing/hanging the fan in its original position at site complete all as specified and directed.
10
-
-
Material & labour rewinding of unserviceable ceiling fan of 1200 / 1400mm sweep of any make and size with original gauge of super enamelled copper wire after necessary cutting, removing burnt winding of Ceiling Fan from core and cleaning all parts including insulation materials, varnishing, heating and replacement of unserviceable spare parts (spare parts such as capacitor, bearing etc shall be measured and paid separately under the relevant item of Sch 'A') and including testing on full load current complete all as specified and directed.
Note:- Unit rate of this item is including the cost of transportation charges from original site to workshop and back from work shop to original site.
10
-
-
Material & labour rewinding of unserviceable exhaust 250mm / 450mm sweep fan rotor with original gauge of super enamelled copper wire after necessary cutting, removing burnt winding of exhaust fan from core and cleaning all parts including insulation materials, varnishing, heating and replacement of unserviceable spare parts (spare parts such as capacitor, bearing etc shall be measured and paid separately under the relevant item of Sch 'A') and including testing on full load current complete all as specified and directed.
Note:- Unit rate of this item is including the cost of transportation charges from original site to workshop and back from work shop to original site.
5
-
-
Taking down the Geyser of capacity 25 / 50 Ltr including disconnecting of electric / water supply connections for repair / replacement of defective components and overhauling / checking, servicing , de- scalling of inner tank , geyser element, checking of geyser assembly and setting of thermostat range complete and refixing the same after repair and testing including making electectric and water supply connection complete all as specified and directed. Note:- a) All safety precautions for the safety precautions for persons working during removal/fixing back of the Geyser shall be ensured by the contractor . Rates are inclusive of brazing of inner tank of copper for prevention of leakage and replacement of clamps nut bolts gasket set complete . a) Replacement of defective components, painting,etc., which shall be measured and paid for separately.
30
-
-
Supply and Fixing Heating element of capacity 1.50 KW (cup type/Triangular type/Round type/Bend type), ISI marked, suitable for geyser of capacity 25/50Ltr complete all as specified and directed.
10
-
-
Replacement of neon Indicator lamp of red and green colour lamps suitable for geyser of capacity 25/ 50 Ltr of any type / make complete all as specified and directed.
5
-
-
Replacement of Thermostat assembly 16 A,240 AC, ISI marked, suitable for geyser of capacity 25/ 50Ltr of any type / make complete all as specified and directed. . Make:- Ditz / Universal /TTE/RACOLD
10
-
-
Replacement of PVC Helical (Hot / Cold) water connection pipe of size 450 mm x 15mm dia with two no of brass nut on each side for geyser complete all as specified and directed.
10
-
-
Supply and replacement of PVC connection heavy duty nylon thread reinforcement 16mm dia 450mm long both end brass nipple with washer for outlet/inlet connection of any capacity/make of vertical type geysers complete all as specified and directed.
5
-
-
Supply and Fix in repair bipin holder for tube light fitting 4` long complete all as specified and directed.
5
-
-
Supply and Fix in repair Starter suitable for 40 watt Tube light fittngs complete all as specified and directed.
20
-
-
Supply and Fix in repair Iginitor suitable for 70-400 w HPSV/MH Lamps of Make surya cat part NO. - SIG I 70-400SV/MH 1x70-400W SV/MH.
20
-
-
Supply and Fix in repair Porcelain lamp holder for HPSV, HPMV 250 / 150 watt
10
-
-
Supply and Fix in repair Porcelain lamp holder for HPSV/HPMV 125/80/70 watt
10
-
-
Supply and Fix in repair Porcelain connector for HPSV/HPMV fitting of any type
10
-
-
Supply and Fix in repair Copper wound for TL 4' x 40 watt fitting (Make:Bajaj/Philip/ Surya)
15
-
-
Supply and Fix in repair Copper Chock for HPSV/HPMV 250-400 W (Make:Bajaj/Philips/ Crompton greaves)
10
-
-
Supply and Fix in repair Copper Chock for HPSV/HPMV 150W (Make:Bajaj/Philips/ Crompton greaves)
15
-
-
Supply and Fix in repair Copper Chock for HPSV/HPMV 70 ( Make:Bajaj/Philips/ Crompton greaves)
5
-
-
Supply and Fix in repair MH Lamp Single Ended 250 Watts (Make:Bajaj/Philips/ Crompton greaves)
10
-
-
Supply and Fix in repair MH Lamp Single Ended 150 Watts (Make:Bajaj/Philips/ Crompton greaves)
10
-
-
Supply and Fix in repair MH Lamp Single/Double Ended 70 Watts (Make:Bajaj/Philips/ Crompton greaves)
5
-
-
Supply and Fix in repair MH Lamp Single/Double Ended 400 Watts (Make:Bajaj/Philips/ Crompton greaves)
5
-
-
Supply and fix in replacement slim, light in wieght , regular electronic ballast having THD 30 % suitable for single/twin CFL/FTL lamp 1x36/40 watt including making connection complete all as specified and directed.
15
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements