Public Health Engineering Department Tender

110 mm dia (BSR_Item_1.4.1.2)

125 mm dia (BSR_Item_1.4.1.3)

140 mm dia (BSR_Item_1.4.1.4)

160 mm dia (BSR_Item_1.4.1.5)

180 mm dia (BSR_Item_1.4.1.6)

200 mm dia (BSR_Item_1.4.1.7)

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils (BSR_PWD/2013/1.8)

Providing, lowering, laying, aligning, fixing in position in pipe line, Resilient Seated D/F DI Sluice valves of approved make & design standard of following dia complete (including jointing & jointing material ) including all material, labour, testing and commissioning along with pipe line as per Technical Specification & as per direction of Engineer. (Category "B" Makes / vendors other then Category "A" will be considered in category “B”). Manually operated class PN 1.0 (BSR_RUIDP_2017_19.23)

80 mm (BSR_Item_19.23.1.1)

100 mm (BSR_Item_19.23.1.2)

125 mm (BSR_Item_19.23.1.3)

150 mm (BSR_Item_19.23.1.4)

200 mm (BSR_Item_19.23.1.5)

Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge. (BSR_PHED/JPR/BSR/2019/51.6)

MS pipe specials upto 600 mm dia (with minimum 5.0 mm thickness sheet) (BSR_Item_1.6.1)

Providing, Fabrication of Mild Steel Plane Ended/ Flanged Specials like Tees, Bends, Reducers, Enlargers, Plugs, Tail Pieces and Blank Flange made from MS pipes, MS sheet strip and MS Sheet of required sizes by welding, cutting and treading as per site conditions and as directed by the Engineer- In- Charge complete in all respect. (BSR_PHED/CHURU/BSR/2019/5.5)

Dismantling of existing structures like culverts, bridges, retaining walls, CC road and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by Engineer.(BSR_RUIDP_2017_2.4)

Cement Concrete Grade M-15 and above and PCC blocks. (BSR_Item_2.4.2)

Providing, laying and compacting plain/ reinforced cement concrete of specified grade in foundation/ leveling course/ pile cap using concrete mixer and vibrater complete including cost of form work, as per drawing and technical specifications and as per clause 1100, 1500, 1700, 2100 of MoRT&H specification including all scaffolding material, labour, machinery. (BSR_RUIDP_2017_13.4)

PCC Grade M -15 (BSR_Item_2.4.2)

PCC Grade M -20 (BSR_Item_2.4.2)

PCC Grade M -30 (BSR_Item_2.4.2)

Providing and laying factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge. General specification of blocks: 1) Shape as defined by Engineer incharge 2) Tensile splitting strength and braking load as per BS 6717:2001 3) Color: Grey cement natural colour 4) Variation in dimension: Less than 1.6mm. 5) Variation in thickness: Less than 3.2mm 6) Abrasion: As per BS: 6717:2001 (PWD_BSR_2019_Churu)

60 mm thick (BSR_Item_11.38.1)

80 mm thick (BSR_Item_11.38.2)

Providing service connection as per technical specification and standard drawing as per relevant IS Code (amended up to date) from all kind of water mains up to consumer meter/premises (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil including demolishing of cement concrete,WBM, Black top etc. Of all thickness; cutting of CC road/jhiri by using a concrete cutter machine; depositing and refilling of pit &jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 50 meter ; providing & fixing of all fitting duly approved in accordance with ISO/DTR 9080 as per specification for potable water including approved make of MS clamp with saddle piece gunmetal ferrule 4.0 mm (ISI make) , gunmetal NRV (ISI make), valve (IS: 778) and specials with MDPE pipe PE 80 PN 12.5 as per ISO 4427, with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . In addition to the ferrule, an orifice of 4.0 mm dia should also be provided in the service line at the entry point of the consumer's property in such a way that it should be accessible for inspection to VWSC, PHED and any other authority which would like to inspect as and when required. The service line should be laid at least 45 CM below ground level, except in cases of concrete/bituminous roads where minimum depth shall be20cm. For detailed specifications of MDPE pipes please refer section "Technical Specifications" of bid document. General specifications of MDPE pipes shall be as under: • The raw material shall be virgin PE 80 Blue compound and comply with the requirements of ISO/Directive of testing material : 9080 with minimum required strength of 8 Kg/sq.cm. • The raw material shall be Food grade quality Pressure rating shall be 12.5 Bar. The pipes shall bear ISO marking.:- Average length upto 5.00 mtr of 20 mm MDPE pipe. (BSR_D&S_2020-21_1.23.1)

Extra length of 20mm MDPE pipe including excavation, providing, laying and jointing for length of service line above 5.00 mtr. (BSR_Item_1.23.2)

Dismantling dry brick pitching in floors drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. (BSR_PWD/2019/14.24)

Demolishing cement concrete including disposal of material within 50 meter lead : (BSR_PWD/CHURU/2019/14.2)

1: 3: 6 or richer mix. (BSR_Item_14.2.1)

1: 4: 8 or leaner mix. (BSR_Item_14.2.2)

Providing, lowering, laying, aligning, fixing in position and jointing CI dismantling joint (suitable for sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning as per Technical Specifications and as per direction of Engineer. (BSR_RUIDP_2017_19.40)

100 mm dia PN-1.0 (BSR_Item_19.40.2)

125 mm dia PN-1.0 (BSR_Item_19.40.3)

200 mm dia PN-1.0 (BSR_Item_19.40.5)

Removing & re-fixing of precast cement concrete interlocking paving blocks of all sizes over 50 mm thick course sand bedding (duly compacted) including filling of joints with sand complete in all respect. (BSR_RUIDP_2017_9.12)

Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering . All up to plinth level. (BSR_CHURU_PWD_2019_3.1)

1:2:4 (1Cement :2 Course Sand 4 Graded stone aggregate 20 mm nominal size. (BSR_Item_3.1.2)

1:4:8 (1Cement :4 Course Sand 8 Graded stone aggregate 20 mm nominal size. (BSR_Item_3.1.6)

Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : (BSR_PWD/CHURU/2019/4.10)

Walls (any thickness) including attached pilasters, buttresses plinth and string course. (BSR_Item_4.10.1)

Columns, pillars, posts and struts etc. (BSR_Item_4.13)

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. (BSR_PWD/CHURU/2019/4.13)

Thermo-mechanically Treated bars (Conforming of relevent IS code) (BSR_Item_4.13.3)

Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominal Mix / Design Mix. (BSR_CHURU_PWD_2019_4.2)

Reinforced Ferro-Cement drain covers designed for 'AA' class loading of size 1000 x 800 mm (BSR_RUIDP_2017_3112)

Reinforced Ferro-Cement drain covers designed for 'AA' class loading of size 1500 x 600 mm (BSR_RUIDP_2017_3113)

Cement plaster on new surface on walls in cement sand mortar 1 : 4 including racking of joints etc. complete fine finished 12 mm thick. (BSR_CHURU_PWD_2019_12.2.1)

Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks, Cement mortar 1 : 6 (1 cement : 6 coarse sand). (BSR_PWD_CHURU_2019_5.1.4)