Local Self Government Department Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 2,00,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Summary
Retender-design Supply Installation Testing Of Multi Level Car Parking At Kannur Municipal Corporation- Amrut
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_LSGD_317395_1Bid Award Id
ViewTender No
E1-24889(3)/15Tender Authority
Local Self Government Department ViewPurchaser Address
-Website
http://https://lsgkerala.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
15.59
Dismantling of flexible pavement ( bituminous courses ) by mechanical means and disposal of dismantled material up to a lead of 1 kilo metre, as per direction of Engineer-in-charge.
23.36
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
161.2
-
-
2.6.1
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
509.62
-
-
2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
124.74
-
-
50.2.25.1
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
585.4
-
-
4.1.3
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size)
16.5
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
86.14
-
-
5.33.1
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level
43.69
-
-
5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
3593.74
-
-
5.9.1
Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
121.42
-
-
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
193.69
-
-
10.19
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
307.2
-
-
10.2
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
31413.23
-
-
10.25.1
Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete
8000
-
-
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
1379.46
-
-
7.1.1
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
177
-
-
16.79
Providing , laying spreading and compacting graded stone aggregate ( size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub - base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer - in- Charge.
57
-
-
16.91.1
Providing and laying factory made chamfered edge Cement Concrete paver blocksin footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table vibratory method using PU mould, laid inrequired colour & pattern over 50mm thick compacted bed of sand, compacting andproper embedding/laying of inter locking paver blocks into the sand bedding layerthrough vibratory compaction by using plate vibrator, filling the joints with sand andcutting of paver blocks as per required size and pattern, finishing and sweepingextra sand. complete all as per direction of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour, design& pattern.
570
-
-
od215522/2018_2019
Providing and laying profiled sheeting 970mm to 1000mm cover width, 26/28mm crest height at 195-200mm centers, made out of '0.5mm TCT, Cold Rolled steel of 550 Mpa yield strength conforming to ASTM A 368 or AS 1595 with hot dip metalic coating 'of minimum 150gm/Sqm zincaluminium alloy coating mass (55% Aluminium, 43.5% zinc and 1.5% Silicon ) total of both size as 'per ASTM A 792 or AS1397. The colour have shall have a total coating thickness iof 35microns of polyster paint system as per 'AS/NZS - 2728:1997 ( category 3 ) of approved colour, comprising of 20 microns exterior coat on top surface and 5 microns reverse 'coat on back surface over 5 microns primer coat on both surfaces. Roofing sheet shall be factory cut and required length of '(up to 12mtr ) to suite site conditions and design drawings. Roofing sheet shall be crest fixed to purlines with hot dip 'galvanized self drilling fastners with integral EPDM washers (one fastner on each crest) also, fastners to be provided on side laps. 'Minimum sheet overlap at end laps shall be 150mm. Penetration and end laps in sheet shall be sealed by using proper sealant. 'Profiled HDPE fillers shall be provided wherever required to close voids between capings and troughs of the sheet to provide a 'weather tight exterior. Rate shall include cost and conveyence of all materials, lead, lift, scaffolding, all labour charges, making the roof water tight with required sealent etc complete at all level and as directed by Engineer-in-Charge.
1360.04
-
-
12.7.2
Providing and fixing 15cm wide, 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.63 mm thick with zinc coating not less than 275 gm/ m2
136
-
-
od215529/2018_2019
Providing and fixing ridge/ valley capping/flashing in required width (minimum 500 mm) with plain galvalume colour coated sheet made out of 0.5mm TCT, minimum 550 MPa cold rolled steel with hot dip metallic coating of Aluminium Zinc alloy (Galvalume) 150 gms/sqm,total of both sides, AZ 150 as per ASTM A 792 or AS1397, with polyester colour coating including cost and conveyance of all materials, scaffolding, lead,lift, labour charges, all taxes etc. complete at all levels as directed by Engineer-inCharge
186.8
-
-
2.34.1
Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos / Lindane emulsifiable concentrate of 20%
243.1
-
-
2.35.3.1
Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment
(excluding the cost of chemical emulsion):Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
442
-
-
Civil Works for BANK ROAD Parking
-
-
-
2.32
Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
110.5
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
42.56
-
-
2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
17.16
-
-
50.2.25.1
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
81.54
-
-
4.1.3
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size)
1.68
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
15.46
-
-
5.33.1
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level
11.7
-
-
5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
946.45
-
-
5.9.1
Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
34.08
-
-
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
36.67
-
-
10.19
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
76.8
-
-
10.2
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
18633.02
-
-
10.25.1
Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete
8000
-
-
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
932.16
-
-
16.79
Providing , laying spreading and compacting graded stone aggregate ( size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub - base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer - in- Charge.
40.8
-
-
16.91.1
Providing and laying factory made chamfered edge Cement Concrete paver blocksin footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table vibratory method using PU mould, laid inrequired colour & pattern over 50mm thick compacted bed of sand, compacting andproper embedding/laying of inter locking paver blocks into the sand bedding layerthrough vibratory compaction by using plate vibrator, filling the joints with sand andcutting of paver blocks as per required size and pattern, finishing and sweepingextra sand. complete all as per direction of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour, design& pattern.
408
-
-
od215522/2018_2019
Providing and laying profiled sheeting 970mm to 1000mm cover width, 26/28mm crest height at 195-200mm centers, made out of '0.5mm TCT, Cold Rolled steel of 550 Mpa yield strength conforming to ASTM A 368 or AS 1595 with hot dip metalic coating 'of minimum 150gm/Sqm zincaluminium alloy coating mass (55% Aluminium, 43.5% zinc and 1.5% Silicon ) total of both size as 'per ASTM A 792 or AS1397. The colour have shall have a total coating thickness iof 35microns of polyster paint system as per 'AS/NZS - 2728:1997 ( category 3 ) of approved colour, comprising of 20 microns exterior coat on top surface and 5 microns reverse 'coat on back surface over 5 microns primer coat on both surfaces. Roofing sheet shall be factory cut and required length of '(up to 12mtr ) to suite site conditions and design drawings. Roofing sheet shall be crest fixed to purlines with hot dip 'galvanized self drilling fastners with integral EPDM washers (one fastner on each crest) also, fastners to be provided on side laps. 'Minimum sheet overlap at end laps shall be 150mm. Penetration and end laps in sheet shall be sealed by using proper sealant. 'Profiled HDPE fillers shall be provided wherever required to close voids between capings and troughs of the sheet to provide a 'weather tight exterior. Rate shall include cost and conveyence of all materials, lead, lift, scaffolding, all labour charges, making the roof water tight with required sealent etc complete at all level and as directed by Engineer-in-Charge.
453.2
-
-
12.7.2
Providing and fixing 15cm wide, 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.63 mm thick with zinc coating not less than 275 gm/ m2
34
-
-
od215529/2018_2019
Providing and fixing ridge/ valley capping/flashing in required width (minimum 500 mm) with plain galvalume colour coated sheet made out of 0.5mm TCT, minimum 550 MPa cold rolled steel with hot dip metallic coating of Aluminium Zinc alloy (Galvalume) 150 gms/sqm,total of both sides, AZ 150 as per ASTM A 792 or AS1397, with polyester colour coating including cost and conveyance of all materials, scaffolding, lead,lift, labour charges, all taxes etc. complete at all levels as directed by Engineer-inCharge
76.6
-
-
2.34.1
Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos / Lindane emulsifiable concentrate of 20%
60.78
-
-
2.35.3.1
Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment
(excluding the cost of chemical emulsion):Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
110.5
-
-
MLCP System for Stadium Parking
-
-
-
MLCP System for STADIUM Parking
od215455/2018_2019
Design, Manufacture, Supply, Installation, Erection, Testing And Commissioning of 4 units of Six Level Six Grid over-ground Puzzle Parking System with Electro Mechanical technology to accommodate minimum of 31 Cars Per unit and in total minimum 124 car spaces with car Carrying Capacity of 2000 kg each in ground floor, & 1800 kg in 1st level to 6th level and Car Dimensions of 5000 mm length x 2100 mm height x width 2250mm (SUV) in ground floor, 5000 mm length x 1700 mm height x width 2250mm in 1st level to 6th level with average retrieval/parking time not more than 180 seconds. The Lifting speed should be @ 6 Meter/Minutes having Motor of 1.5 Kw for 1st floor, 3 Kw for 2nd & 3rd, 4 Kw for 5th & 6th and above Floor pallets with lateral movement speed of 7 M/Min having Motor of 0.2 KW - 0.4 KW and having safety features as outlined in specifications and with all the structural frame work designed for all probable loading conditions including loads due to roofing/cladding, but excluding cost for truss and sheet for Roofing/cladding, Smart Card/RFID, Branding provisions, Mechanical barriers / Boom barriers, PLC with Auto as well as Manual Mode of operation including cost of maintenance for one year during the Defect Liability period as mentioned in tender documents inclusive all taxes
124
-
-
MLCP System for Bank Road Parking
-
-
-
MLCP System for BANK ROAD Parking
od215456/2018_2019
Design, Manufacture, Supply, Installation, Erection, Testing And Commissioning of 1 unit of Six Level Six Grid over-ground Puzzle Parking System with Electro Mechanical technology to accommodate minimum of 31 Cars Per unit with car Carrying Capacity of 2000 kg each in ground floor, & 1800 kg in 1st level to 6th level and Car Dimensions of 5000 mm length x 2100 mm height x width 2250mm (SUV) in ground floor, 5000 mm length x 1700 mm height x width 2250mm in 1st level to 6th level with average retrieval/parking time not more than 180 seconds. The Lifting speed should be @ 6 Meter/Minutes having Motor of 1.5 Kw for 1st floor, 3 Kw for 2nd & 3rd, 4 Kw for 5th & 6th and above Floor pallets with lateral movement speed of 7 M/Min having Motor of 0.2 KW - 0.4 KW and having safety features as outlined in specifications and with all the structural frame work, Branding provisions, Mechanical barriers / Boom barriers, PLC with Auto as well as Manual Mode of operation including cost of maintenance for one year during the Defect Liability period as mentioned in tender documents inclusive all taxes
31
-
-
Sump and Pump room for STADIUM Parking
-
-
-
2.6.1
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
289.04
-
-
2.26.1
Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
142.07
-
-
2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
101.36
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
10.8
-
-
5.33.1
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level
61.73
-
-
5.33.2
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level
15.14
-
-
5.9.1
Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
9.58
-
-
5.9.2
Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
204.24
-
-
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
162.9
-
-
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
17.17
-
-
5.9.16.1
Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide
40.6
-
-
5.9.19
Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges
31.5
-
-
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
9702.1
-
-
50.6.2.2
Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
21.53
-
-
51.6.4.3
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.0 in superstructure
above plinth level up to floor V level in all shapes and sizes in:cement mortar 1:6 (1 cement : 6 coarse
sand)
1.96
-
-
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
67.5
-
-
21.1.2.2
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
67.5
-
-
21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
15
-
-
10.6.1
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wirevsprings manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover
3.6
-
-
10.7
Providing and fixing ball bearing to rolling shutters
1
-
-
9.48.2
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc
180
-
-
10.5.1
Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces
2.88
-
-
11.6.1
Cement plaster askirting upto 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement .18 mm thick
4.1
-
-
13.1.2
12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).
301.37
-
-
13.9.1
Cement plaster 1:3 ( cement: 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster
266
-
-
13.16.1
6 mm cement plaster of mix:1:3 ( 1 cement: 3 fine sand)
95.15
-
-
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
396.52
-
-
13.60.1
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
396.52
-
-
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
32.65
-
-
22.5
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all corners, junctions of pipes and masonry with polymer mixed slurry.
196.36
-
-
22.4.1 Providing and Placing in position suitable PVC water stops conforming to IS :12200 for construction / expansion joints between two RCC members and fixed othe reinforcement with binding wire before pouring concrete etc. corriplete:Serrated with central bulb ( 225 mm wide, 8-11 mm thick)
44.8
-
-
19.18.1
Supplying and fixing C.I with out frame for manholes:455 x 610 mm rectangular C.I cover ( light duty ) the weight of the cover to be no less than 23 kg
2
-
-
5.9.7
Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings )
except spiral - staircases)
12.3
-
-
22.23A
Providing & Applying polymer modified, flexible cementatious negative sidewaterproofing coating with elastic waterproofing polymers on interior wall plastersurface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatiouswaterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) afterscrapping and properly cleaning the surface to remove pre-existing paint film &loose particles till plaster is visible, complete in all respect as per the direction ofEngineer-in-Charge.
440.42
-
-
9.67.1
Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete:150 mm
2
-
-
10.26.3
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel prime .G.I. pipes
210
-
-
Over Head Tank for STADIUM Parking
-
-
-
2.28.1
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil
9
-
-
2.6.1
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
28.32
-
-
2.26.1
Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked
materials.All kinds of soil
7.08
-
-
2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
22.66
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
1.82
-
-
5.33.1
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level
7.01
-
-
5.33.2
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level
12.75
-
-
5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
684.65
-
-
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
1946.56
-
-
5.9.1
Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
16.31
-
-
5.9.2
Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
53.78
-
-
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
23.81
-
-
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
22.22
-
-
5.9.6
Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
63.6
-
-
5.9.16.1
Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide
31.6
-
-
5.11.1
Extra additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
13.9
-
-
22.5
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
44
-
-
10.1
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
31.3
-
-
10.2
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
480
-
-
10.26.3
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.G.I. pipes
288
-
-
13.16.1
6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
130.68
-
-
13.46.1
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
77.8
-
-
50.18.9.21.7
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl
1
-
-
22.4.1
Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete:Serrated with central bulb ( 225 mm wide, 8-11 mm thick)
11.22
-
-
19.18.1
Supplying and fixing C.I with out frame for manholes:455 x 610 mm rectangular C.I cover ( light duty ) the weight of the cover to be no less than 23 kg
1
-
-
Sump and Pump room for Bank Road Parking
-
-
-
2.6.1
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
289.04
-
-
2.26.1
Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
142.07
-
-
2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
101.36
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
10.8
-
-
5.33.1
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level
61.73
-
-
5.33.2
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level
15.14
-
-
5.9.1
Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
9.58
-
-
5.9.2
Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
204.24
-
-
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
162.9
-
-
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
17.17
-
-
5.9.16.1
Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide
40.6
-
-
5.9.19
Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges
31.5
-
-
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
9702.1
-
-
50.6.2.2
Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
21.53
-
-
51.6.4.3
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.0 in superstructure
above plinth level up to floor V level in all shapes and sizes in:cement mortar 1:6 (1 cement : 6 coarse
sand)
1.96
-
-
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
67.5
-
-
21.1.2.2
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
67.5
-
-
21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
15
-
-
10.6.1
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire
springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover
3.6
-
-
10.7
Providing and fixing ball bearing to rolling shutters
1
-
-
9.48.2
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or
round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden
frames with rawl plugs screws etc
180
-
-
10.5.1
Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces
2.88
-
-
11.6.1
Cement plaster askirting upto 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement .18 mm thick
4.1
-
-
13.1.2
12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).
301.37
-
-
13.9.1
Cement plaster 1:3 ( cement: 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster
266
-
-
13.16.1
6 mm cement plaster of mix:1:3 ( 1 cement: 3 fine sand)
95.15
-
-
13.43.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
396.52
-
-
13.60.1
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two
or more coats on new work
396.52
-
-
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
32.65
-
-
22.5
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all corners, junctions of pipes and masonry with polymer mixed slurry.
196.36
-
-
22.4.1 Providing and Placing in position suitable PVC water stops conforming to IS :12200 for construction / expansion joints between two RCC members and fixed othe reinforcement with binding wire before pouring concrete etc. corriplete:Serrated with central bulb ( 225 mm wide, 8-11 mm thick)
44.8
-
-
19.18.1
Supplying and fixing C.I with out frame for manholes:455 x 610 mm rectangular C.I cover ( light duty ) the weight of the cover to be no less than 23 kg
2
-
-
5.9.7
Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)
12.3
-
-
22.23A
Providing & Applying polymer modified, flexible cementatious negative sidewaterproofing coating with elastic waterproofing polymers on interior wall plastersurface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatiouswaterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) afterscrapping and properly cleaning the surface to remove pre-existing paint film &loose particles till plaster is visible, complete in all respect as per the direction ofEngineer-in-Charge.
440.42
-
-
9.67.1
Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete:150 mm
2
-
-
10.26.3
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel prime .G.I. pipes
210
-
-
Over Head Tank for Bank Road Parking
-
-
-
2.6.1
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
28.32
-
-
2.26.1
Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked
materials.All kinds of soil
7.08
-
-
2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
22.66
-
-
2.28.1
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil
9
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
1.82
-
-
5.9.1
Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
16.31
-
-
5.9.2
Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
53.78
-
-
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
23.81
-
-
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
22.22
-
-
5.9.6
Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
63.6
-
-
5.9.16.1
Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide
31.6
-
-
5.11.1
Extra additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
13.9
-
-
5.33.1
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level
7.01
-
-
5.33.2
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level
12.75
-
-
5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
684.65
-
-
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
1946.56
-
-
22.5
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
44
-
-
10.1
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
31.3
-
-
10.2
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
480
-
-
10.26.3
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.G.I. pipes
288
-
-
13.16.1
6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
130.68
-
-
13.46.1
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
77.8
-
-
50.18.9.21.7
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl
1
-
-
22.4.1
Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete:Serrated with central bulb ( 225 mm wide, 8-11 mm thick)
11.22
-
-
19.18.1
Supplying and fixing C.I with out frame for manholes:455 x 610 mm rectangular C.I cover ( light duty ) the weight of the cover to be no less than 23 kg
1
-
-
Fire Fighting System for STADIUM Parking
-
-
-
od247445/2018_2019
Supply, Installation, Testing and Commissioning of diesel engine driven stand by fire pump suitable for automatic operation and consisting of following: complete in all respect as required and as per technical specification. (a) Horizontal, centrifugal, split casing type pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest oulet at specified flow of 2280 lpm at 55 m head conforming to IS 1520. (b)Suitable HP and RPM water cooled diesel engine with radiator conforming to relevant BS & IS standard complete with auto starting mechanism, 12 volts/24 Volts electric starting equipment, Diesel Tank, exhaust pipe extended upto 1 m. outside pump house duly insulated with 50 mm. thick glass wool with 1.0 mm. thick aluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads.
2
-
-
od251689/2018_2019
Supply, Installation, Testing and Commissioning of electric driven main fire pump suitable for automatic operation and consisting of following and complete in all respect as per technical specification; (a) Horizontal, centrifugal, split casing type pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest oulet at specified flow of 2280 lpm at 55 m head, conforming to IS 1520. (b)Suitable HP and RPM, Sqiurrel cage induction motor, TEFC, synchronous speed for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads complete in all respect as per technical specification.
1
-
-
od247452/2018_2019
Supply, installation, testing and commissioning of electric driven pump set (terrace pump) and consisting of following: complete in all respect as required. Monoblock Pump rated for 900 lpm, 40m head C.I body, bronze/Gun metal impeller,SS shaft with mechanical seal, volute type with suitable HP SQ cage induction motor, suitable for operation on 415V, 3phase 50Hz, AC with IP 55 class of protection for enclosure, horizontal foot mounted type with class F insulation.M.S. fabricated common base plate, foundation bolts, anti vibration pads etc. as required. The cost shall include suitbale capacity DOL or star delta starter and one isolator near the pump with required accessories.
1
-
-
od247458/2018_2019
Supply, Installation, Testing and Commissioning of electric driven pressurisation pump (Jockey Pump ) suitable for automatic operation and consisting of following: complete in all respect as required. (a) Horizontal, centrifugal end suction type pump of cast iron body and stainless steel impeller with stainless steel shaft, mechanical seal and having a flow of 180 lpm at 55m head conforming to IS 1520 (b)Suitable HP and RPM Sqiurrel cage induction motor, TEFC, suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation as required duly plastered with anti vibration pads
2
-
-
od247459/2018_2019
Supply, installation, testing and commissioning of pressure gauge 0-200 PSI ( 0 - 14 Kg ) range, 3/8" BSP bottom entry, 4" dial weather proof with stainless steel internals, siphon tube including all necessary fittings etc. complete as required.
6
-
-
od247460/2018_2019
Supply, installation, testing and commissioning of industrial type pressure switch having 1/4" BSP(F) connection IP:32 enclosure protection, phosphor bronze bellows as sensing element, SDPT contact system, switch rating 6A Inductive/lOA resistive 380 V AC, 0.2A Inductive/10A resistive 250V DC suit with ball valve etc. complete as required
5
-
-
od247463/2018_2019
Supply, Installation, Testing and Commissioning of MS(Heavy C' Class) pipe IS:1239/ IS: 3589 marked including all fittings and accessories such as elbows, flanges, tees, reducers etc. conforming to IS standards complete including painting, welding, jointing and neoprene gaskets, nuts, bolts etc. as required. (for fire hydrant and sprinkler system). The pipe shall be painted with one coat of primer & two coats of post office red enamel paint. The pipe shall fixed on ceiling, walls, columns, truss etc for all heights with suitbale hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required.
25 mm dia
37
-
-
od247464/2018_2019
Supply, Installation, Testing and Commissioning of MS(Heavy C' Class) pipe IS:1239/ IS: 3589 marked including all fittings and accessories such as elbows, flanges, tees, reducers etc. conforming to IS standards complete including painting, welding, jointing and neoprene gaskets, nuts, bolts etc. as required. (for fire hydrant and sprinkler system). The pipe shall be painted with one coat of primer & two coats of post office red enamel paint. The pipe shall fixed on ceiling, walls, columns, truss etc for all heights with suitbale hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required.
32 mm dia
15
-
-
od247465/2018_2019
Supply, Installation, Testing and Commissioning of MS(Heavy C' Class) pipe IS:1239/ IS: 3589 marked including all fittings and accessories such as elbows, flanges, tees, reducers etc. conforming to IS standards complete including painting, welding, jointing and neoprene gaskets, nuts, bolts etc. as required. (for fire hydrant and sprinkler system). The pipe shall be painted with one coat of primer & two coats of post office red enamel paint. The pipe shall fixed on ceiling, walls, columns, truss etc for all heights with suitbale hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required.
40 mm dia
15
-
-
od247466/2018_2019
Supply, Installation, Testing and Commissioning of MS(Heavy C' Class) pipe IS:1239/ IS: 3589 marked including all fittings and accessories such as elbows, flanges, tees, reducers etc. conforming to IS standards complete including painting, welding, jointing and neoprene gaskets, nuts, bolts etc. as required. (for fire hydrant and sprinkler system). The pipe shall be painted with one coat of primer & two coats of post office red enamel paint. The pipe shall fixed on ceiling, walls, columns, truss etc for all heights with suitbale hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required.
50 mm dia
26
-
-
od247467/2018_2019
Supply, Installation, Testing and Commissioning of MS(Heavy C' Class) pipe IS:1239/ IS: 3589 marked including all fittings and accessories such as elbows, flanges, tees, reducers etc. conforming to IS standards complete including painting, welding, jointing and neoprene gaskets, nuts, bolts etc. as required. (for fire hydrant and sprinkler system). The pipe shall be painted with one coat of primer & two coats of post office red enamel paint. The pipe shall fixed on ceiling, walls, columns, truss etc for all heights with suitbale hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required.
65 mm dia
6
-
-
od247468/2018_2019
Supply, Installation, Testing and Commissioning of MS(Heavy C' Class) pipe IS:1239/ IS: 3589 marked including all fittings and accessories such as elbows, flanges, tees, reducers etc. conforming to IS standards complete including painting, welding, jointing and neoprene gaskets, nuts, bolts etc. as required. (for fire hydrant and sprinkler system). The pipe shall be painted with one coat of primer & two coats of post office red enamel paint. The pipe shall fixed on ceiling, walls, columns, truss etc for all heights with suitbale hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required.
80 mm dia
14
-
-
od247469/2018_2019
Supply, Installation, Testing and Commissioning of MS(Heavy C' Class) pipe IS:1239/ IS: 3589 marked including all fittings and accessories such as elbows, flanges, tees, reducers etc. conforming to IS standards complete including painting, welding, jointing and neoprene gaskets, nuts, bolts etc. as required. (for fire hydrant and sprinkler system). The pipe shall be painted with one coat of primer & two coats of post office red enamel paint. The pipe shall fixed on ceiling, walls, columns, truss etc for all heights with suitbale hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required.
100 mm dia
40
-
-
od247470/2018_2019
Supply, Installation, Testing and Commissioning of MS(Heavy C' Class) pipe IS:1239/ IS: 3589 marked including all fittings and accessories such as elbows, flanges, tees, reducers etc. conforming to IS standards complete including painting, welding, jointing and neoprene gaskets, nuts, bolts etc. as required. (for fire hydrant and sprinkler system). The pipe shall be painted with one coat of primer & two coats of post office red enamel paint. The pipe shall fixed on ceiling, walls, columns, truss etc for all heights with suitbale hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required.
150 mm dia
55
-
-
od247471/2018_2019
Supply, Installation, Testing and Commissioning of MS(Heavy C' Class) pipe IS:1239/ IS: 3589 marked including all fittings and accessories such as elbows, flanges, tees, reducers etc. conforming to IS standards complete including painting, welding, jointing and neoprene gaskets, nuts, bolts etc. as required. (for fire hydrant and sprinkler system). The pipe shall be painted with one coat of primer & two coats of post office red enamel paint. The pipe shall fixed on ceiling, walls, columns, truss etc for all heights with suitbale hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required.
200 mm dia
17
-
-
od247474/2018_2019
Supply, laying, testing and commissioning of 'C' class heavy duty MS pipe of following size conforming to IS 1239 including fittings like elbows, tees, tapers, flanges, nuts/bolts, gaskets etc., in ground at a depth of 1m from ground level including excavation & providing cement concrete blocks as supports at 3m intervals, anticorrosive wrapping coating of 4mm thickness as per IS10221, refilling the trench etc. of following sizes complete as required.
80 mm dia
2
-
-
od251672/2018_2019
Supply, laying, testing and commissioning of 'C' class heavy duty MS pipe of following size conforming to IS 1239 including fittings like elbows, tees, tapers, flanges, nuts/bolts, gaskets etc., in ground at a depth of 1m from ground level including excavation & providing cement concrete blocks as supports at 3m intervals, anticorrosive wrapping coating of 4mm thickness as per IS10221, refilling the trench etc. of following sizes complete as required.
100 mm dia
7
-
-
od247475/2018_2019
Supply, laying, testing and commissioning of 'C' class heavy duty MS pipe of following size conforming to IS 1239 including fittings like elbows, tees, tapers, flanges, nuts/bolts, gaskets etc., in ground at a depth of 1m from ground level including excavation & providing cement concrete blocks as supports at 3m intervals, anticorrosive wrapping coating of 4mm thickness as per IS10221, refilling the trench etc. of following sizes complete as required.
150 mm dia
130
-
-
od247480/2018_2019
Supply, installation, testing and commissioning of dual plate non-return valve of following diameter, PN16 conforming to API 594 with Cast iron/Cast steel body complete with all accessories including flanges, rubber gasket, bolts, nuts, washers etc. complete as required.
65 mm dia
2
-
-
od247481/2018_2019
Supply, installation, testing and commissioning of dual plate non-return valve of following diameter, PN16 conforming to API 594 with Cast iron/Cast steel body complete with all accessories including flanges, rubber gasket, bolts, nuts, washers etc. complete as required.
100 mm dia
1
-
-
od251673/2018_2019
Supply, installation, testing and commissioning of dual plate non-return valve of following diameter, PN16 conforming to API 594 with Cast iron/Cast steel body complete with all accessories including flanges, rubber gasket, bolts, nuts, washers etc. complete as required.
200 mm dia
1
-
-
od247482/2018_2019
Supply, installation, testing and commissioning of dual plate non-return valve of following diameter, PN16 conforming to API 594 with Cast iron/Cast steel body complete with all accessories including flanges, rubber gasket, bolts, nuts, washers etc. complete as required.
150 mm dia
5
-
-
od247483/2018_2019
Supply, installation, testing and commissioning of butterfly valve PN 16, with Cast iron/Carbon steel body complete with all accessories including flanges, rubber gasket, bolts, nuts, washers etc. complete as required and conforming to IS 13095.
50 mm dia
6
-
-
od247484/2018_2019
Supply, installation, testing and commissioning of butterfly valve PN 16, with Cast iron/Carbon steel body complete with all accessories including flanges, rubber gasket, bolts, nuts, washers etc. complete as required and conforming to IS 13095.
65 mm dia
2
-
-
od247485/2018_2019
Supply, installation, testing and commissioning of butterfly valve PN 16, with Cast iron/Carbon steel body complete with all accessories including flanges, rubber gasket, bolts, nuts, washers etc. complete as required and conforming to IS 13095.
80 mm dia
2
-
-
od247486/2018_2019
Supply, installation, testing and commissioning of butterfly valve PN 16, with Cast iron/Carbon steel body complete with all accessories including flanges, rubber gasket, bolts, nuts, washers etc. complete as required and conforming to IS 13095.
100 mm dia
6
-
-
od247487/2018_2019
Supply, installation, testing and commissioning of butterfly valve PN 16, with Cast iron/Carbon steel body complete with all accessories including flanges, rubber gasket, bolts, nuts, washers etc. complete as required and conforming to IS 13095.
150 mm dia
8
-
-
od247488/2018_2019
Supply, installation, testing and commissioning of butterfly valve PN 16, with Cast iron/Carbon steel body complete with all accessories including flanges, rubber gasket, bolts, nuts, washers etc. complete as required and conforming to IS 13095.
200 mm dia
1
-
-
od247527/2018_2019
Supply, installation, testing and commissioning of swing type Foot valve with CI body, strainer of following size confirming to IS specifications complete with gaskets, seal and accessories complete as required.
80 mm dia
2
-
-
od247528/2018_2019
Supply, installation, testing and commissioning of Y strainer with CI body, following size confirming to IS specifications complete with gaskets, seal and accessories complete in all respect as per technical specification.
200 mm dia
1
-
-
od247546/2018_2019
Supply and installation of glow signage (photoluminescent)of "3M" Make such as FIRE ORDER signage of size 500*800 MM as per conventional design/ colour code on 4 mm thick foam sheet. The signage shall be either fixed on the wall with the help of screws/double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required.
3
-
-
od247547/2018_2019
Supply and installation of glow signage (photoluminescent)of "3M" Make "FIRE ASSEMBLY POINT" of standard size (500*200 MM) as per conventional design/ colour code on 4 mm thick foam sheet. The signage shall be either fixed on the wall with the help of screws/double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required.
1
-
-
od247548/2018_2019
Supply and fixing of Fire Emergency Evacuation Plan (Color) Printed in Photo Paper of Size A2 sandwitched in Clear acrylic sheets fixed using SS Studs and other accessories complete as required.
7
-
-
od247549/2018_2019
Supply and installation of glow signage (photoluminescent)of "3M" Make such as Emergency Exit/Fire Exit signage etc. of standard size (500*200 MM) as per conventional design/ colour code on 4 mm thick foam sheet. The signage shall be either fixed on the wall with the help of screws/double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required.
12
-
-
od247550/2018_2019
Supply, installation, testing and commissioning of wall/ceiling mounted 6W speaker including all necessary accessories complete as required.
7
-
-
od247551/2018_2019
Supply, installation, testing and commissioning of wall mounted talk back unit including all necessary accessories complete as required.
7
-
-
od247552/2018_2019
Supply, installation, testing and commissioning of public address and talk back system consisting of 6 zone public address cum talkback console with mike and selector. 6 channel talk back master control panel with 2x16 character LCD display,power supply, battery charger, battery housing, 80 W PA & mic, 6 channel selector with all call and mic on. The console shall be provided with suitbale capacity amplifier (min 80W) and suitable capacity battery (min 12V) all assembled in a cabinet and meeting the technical specifications. The rate shall include the cost of all the necessary accessories as required for the operation of the system.
1
-
-
od247553/2018_2019
Supply and laying of 25mm dia PVC conduit along with accessories like PVC bends,couplers,junction box,fastners, iron staples/saddles/screws,in surface/ recess including cutting the wall/ceiling and making good the same in case of recessed conduit etc. complete as required.
10
-
-
od247554/2018_2019
Supply and laying of 2x 1.5sq.mm armoured Copper FRLS cable ISI marked with proper clamping, supports and terminations appropriately above ground .
297
-
-
od247555/2018_2019
Supply, installation, testing and commissioning of Conventional Type 6 zone manual operated Fire Alarm Panel including battery backup. The panel shall be microprocessor based with its own micro controller, memory, communication module etc.The panel shall have Keypad operation, L C D unit to indicate Fire / Fault Signal of individual unit, etc complete in all respects. The item shall include 24 Volts sealed lead acid battery sufficient for 24 hrs back up with battery charger.
1
-
-
od247556/2018_2019
Supply, installation, testing and commissioning of conventional type Hooter with a minimum sound level of 80db at 10ft distance,interconnecting to loop cable complete as required.
8
-
-
od247557/2018_2019
Supply, installation, testing and commissioning of Conventional type Manual Call Point Resettable type via Special Key interconnecting to loop cable as required.
8
-
-
od247558/2018_2019
Supply and installation of Carbon-dioxide extinguisher of ISI marked 4.5 Kg capacity made of high pressure seamless steel cylinder (CCE marked ) complete with wheel type valve with one meter long braided high pressure discharge hose complete in all respects including initial fill with CO2 gas.
1
-
-
od247559/2018_2019
Supply and installation of ISI marked ABC Stored pressure type Fire Extinguisher 5 Kgs Capacity Mono Ammonium Phosphate based Dry Chemical Powder for Fighting ABC Class of Fire, stored Pressure type of Mild steel body pressurized by Nitrogen Gas. The Extinguisher shall have pressure gauge for indicating inside pressure with opening and closing lever of squeeze grip type with tamper proof seal, complete with wall bracket.
8
-
-
od247560/2018_2019
Supply, Installation, Testing and Commissioning of 150mm dia Sprinkler alarm valve of Cast iron body and bronze working parts comprising of water motor alarm, bronze seat clapper, and clapper arm, hydraulically driven mechanical gong bell to sound continuous alarm when the Wet riser/Sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, GI pipe of required size, flanges, orifice plate, gasket etc. complete as required.
1
-
-
od247561/2018_2019
Supply, installation, testing and commissioning of sprinkler heads Standard response, standard coverage HORIZONTAL SIDEWALL sprinkler ;1/2" NPT, K-5.6, Chrome Finish; operating temperature at 68 deg. C.
36
-
-
od247562/2018_2019
Supply, installation, testing and commissioning of 25mm air release valve with all the necessary accessories complete as required.
8
-
-
od247563/2018_2019
Supply, installation, testing and commissioning of 4 way fire brigade collective breaching with 4 nos. gun metal male instantaneous inlet couplings complete with cap and chain as required for 150mm dia flanged out let connection and built in check valves complete in all respects as required by the standard specifications.
2
-
-
od247564/2018_2019
Supply, installation, testing and commissioning of hose boxes wall/pedestal type of size 750 x 250 x 600 mm made out of 16 SWG MS sheet steel with front side glass, locking arrangement and painted with approved colour completed as required and as per specifications. The pedestal shall be made of suitable channel with MS supports and mounted on a PCC foundation on ground.
8
-
-
od247565/2018_2019
Supply, installation, testing and commissioning of 63 mm dia Gun metal branch pipe with 20 mm (nominal internal diameter) size Gun Metal nozzle conforming to IS 903, suitable for instantaneous connection to inter-connect hose pipe coupling complete as required.
8
-
-
od247566/2018_2019
Supply, installation, testing and commissioning of 63 mm dia, 15 mtr. Long RRL hose pipe with 63 mm dia Male and Female Gun metal couplings duly binded with wire, rivets etc. conforming to IS 636 (type-A) complete as required. (Note: the rate shall include cost of necessary supports for placing the hoses inside the shaft)
16
-
-
od247567/2018_2019
"Supply, installation, testing and commissioning of First-aid Hose Reel with MS construction spray painted in Post office Red, conforming to IS 884 with up to date amendments, complete with the following as required.
(a) 30 m. long 20 mm (nominal internal dia water hose Thermoplastic (Textile reinforced) Type-2 as per
IS: 12585 (b) 20 mm (nominal internal ) dia gun metal globe valve & nozzle.
(c) Drum and brackets for fixing the equipments on wall.
(d) Connections from riser with suitable dia stop valve (gun metal) & M.S. Pipe"
6
-
-
od247568/2018_2019
Supply, installation, testing and commissioning of gun metal fire hydrant valve, single headed oblique type 63 mm instantaneous outlets with female socket for hose connection and inlet side with flange suitable for 80 mm pipe flange, valve conforming to 1S:5290 complete with blank cap chain, etc complete as required.
8
-
-
od247569/2018_2019
Supply, installation, testing and commissioning of air vessel made of 250 mm dia 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.
1
-
-
Electrical Works for Stadium Parking
-
-
-
od324796/2018_2019
"Supply, Installation, Testing and Commissioning of outdoor 160 KVA prime rated D.G Set with acoustic enclosure and Control panel ,protection and digital metering,controls and interlocks, CTs and transducers for all metering and protection and suitable FP MCCB etc. , including antivibration mountings, exhaust silencer and exhaust pipe conforming to latest environment protection regulations for emission and noise levels complete with , water/ coolant cooled, (radiator type) four stroke, electric start conforming to BS: 5514 15 KVA prime rating, brushless, self excited, self regulated and suitable for continuous operation at 1500RPM, generating 415 V+/-5% Volts at 0.8 p.f (lag), 50Hz,3 phase, 4 wire system generally conforming to BS: 2613 & IS: 4722. Both Engine and Alternator shall be mounted on common channel iron base frame, and with standard accessories such as lead acid batteries and engine driven battery charger along with leads,battery stand, necessary control wiring with control cables, first fill of lubricating oil, and earthing as per standards Fuel tank , fuel piping from fuel tank to Engine, Residential silencer, suitable size Cable termination box with extended Alternator terminal with bus bars etc as required and as per specifications.Rate shall be inclusive of all the civil work including RCC foundation. The work should be as per Electrical Inspectorate/ Pollution control board standards."
1
-
-
od325151/2018_2019
Supply, installation, testing and commissioning of energymeter box of cubicle construction made from 16SWG CRCA sheet including one number of TOD meter with CT and 3 Nos of 125A HRC fuse,125 A FP isolator and neutral link, interconnections, providing necessary supports made from the same gauge CRCA sheet to fix energymeters, etc.The cubicle shall be provided with hinged door construction and vision panel for the meter compartment. Suitable knock out for cable entry and exit shall be provided. The entire board shall be painted with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc as required including fixing it on wall, making good the damages colour washing etc. as required..
2
-
-
od325677/2018_2019
MAIN PANEL
Supply, Installation, Testing & Commissioning of Cassette Panel, cubicle type, made out of 2mm thick
CRCA sheet, totally enclosed, IP42, free standing, wall / floor mounting, dust and vermin proof, powder
coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC
system with busbars extendable on both sides, including internal wiring with suitable size wires, rotary
handle, spreader etc. The panel shall be OEM Make or type tested Panel manufacturer as per IEC
61439-1&2 with all accessories as per drawing & specification.
INCOMER
125 A TPN SDU
INCOMER2
320 A TPN MCCB with Thermal Magnetic Release
BUSBARS
1 Set of 320AmpTPN aluminium busbars
BUS COUPLER
320 A MCCB TPN
INSTRUMENTS
1 No Three phase Digital voltmeter, Acc. Class 1
3 No Three phase Digital ammeter, Acc. Class 1
1 Set of phase indicating lamps, LED type, RYB with 3 Nos. SP MCB control.
OUTGOING
250 A TPN MCCB 25 kA with Thermal Magnetic Release - 1 no
40 A TPN MCCB 25 kA with Thermal Magnetic Release - 7 nos'
25 A Double Pole C Curve MCB
The panel shall be with Top/bottom entry to receive incoming & outgoing cable, all necessary
interconnection & accessories as per particular specification & single line diagram.
1
-
-
od325687/2018_2019
Main Fire Pump Panel
Supply Installation Testing and Commissioning of cubicle type floor mounted panel made out of 14 SWG
MS sheet complete with contactors, auxiliary contacts, indicating lamps, ammeters,voltmeters with
selector switches, fuses, suitable motor starter including connections complete as required : Panel shall
be enclosed and with all necessary components complete in all respects including necessary control
wiring as per the details given below
Incoming
250 Amps FP MCCB ISOLATOR - 1 no
Voltmeter 0 - 500 - 1 no
Voltmeter Selector Switch - 1 no
Ammeter ( 0 - 320A ) - 3 no.s
320/5A 15VA class 1 resin cast CT - 3 Nos
Indication Lamps (LED type )- 1 set ( 1 set of 3 Nos RYB )
Bus bar chamber with 250 Amps Aluminum Bus Bar, suitable for 3 phase and neutral system- 1 set
Required no of auxiliary contacts
Outgoing
100 Amps TPN MCCB 25 kA - 2 nos
40 Amps TPN MCCB 25 kA - 4 nos
25 A DP MCB - 2Nos
Fully automatic star delta Starter without overload relay (15kW) with LED illuminated ON OFF push
button - 1 No.
Fully automatic star delta Starter without overload relay (11kW) with LED illuminated ON OFF push
button - 2 No.
Auxiliary contacts for Main & Jockey Pumps
Auto Manual Selector Switch with Control wiring for Main, Diesel engine pump & Jockey Pump
Annunciator with hooter accept / reset & control wiring
Above panel to be supplied with suitable capacity power & control wiring to provide control power supply
in case of power failure and with all the necessary acessories for suitable operation of the pumps.
The rate shall include the cost of all the required control wirings (from pressure gauge to panel)
1
-
-
2.3.1
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator6 way, Double door
1
-
-
od325213/2018_2019
MCB & DISTRIBUTION BOARD
Supply and fixing of following rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required. 2 pole 25 amps. (230 Volts),30mA sensitivity.
1
-
-
2.10.1
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
6
-
-
od325269/2018_2019
CABLES AND CABLING
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 3.5C 185 Sq.mm Al
102
-
-
od325277/2018_2019
CABLES AND CABLING
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 3.5 C 120 Sq.mm Al
20
-
-
od325288/2018_2019
CABLES AND CABLING
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 3 C 50 Sqmm Al
22
-
-
od325296/2018_2019
CABLES AND CABLING
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
4C 6 sqmm Al
165
-
-
od325308/2018_2019
CABLES AND CABLING
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
3C 6 sqmm Al
44
-
-
od325313/2018_2019
CABLES AND CABLING
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
3C 10 Sq.mm Al
22
-
-
9.1.27
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)
4
-
-
9.1.25
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 120 sq. mm (45mm)
2
-
-
9.1.11
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 50 sq. mm (32mm)
4
-
-
9.1.7
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 10 sq. mm (22mm)
4
-
-
od325338/2018_2019
CABLES AND CABLING
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4C 6 Sq.mm Al
10
-
-
od325348/2018_2019
CABLES AND CABLING
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3C 6 Sq.mm Al
8
-
-
7.7.1
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KVgrade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
69
-
-
7.7.3
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KVgrade of following size on wall surface as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
33
-
-
7.1.1
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size direct in ground including excavation, sand cushioning, protective covering andrefilling the trench etc as required.Upto 35 sq. mm
159
-
-
7.1.3
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size direct in ground including excavation, sand cushioning, protective covering andrefilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm
89
-
-
7.2.1
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KVgrade of following size direct in ground in the same trench in one tier horizontal formationincluding excavation, sand cushioning, protective covering and refilling the trench etc asrequired.Upto 35 sq. mm
15
-
-
7.5.1
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm
10
-
-
5.1
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providingmasonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required.
7
-
-
5.9
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earthelectrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
119
-
-
5.8
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earthelectrode, including connection/ terminating with nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
15
-
-
od325520/2018_2019
Supplying and laying G.I/Copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
10 SWG Cu
15
-
-
od325545/2018_2019
EARTHING AND SAFETY EQUIPMENTS
Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. as required. 10 SWG Cu
15
-
-
5.15
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
10
-
-
5.14
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
10
-
-
od326656/2018_2019
EXTERNAL LIGHTING
Supply, installation, testing and commissioning of swaged street light pole of 5 meter height with 0.5 meter overhang single arm bracket suitable for mounting 1number 25W LED street Light fixtures. The pole shall be of 4.2M height made out of hot dip galvanised 3 mm thick MS sheet, primered and polyurethane painted suitable for mounting 25 W LED street light luminaire . The LED Street Lighting luminaire shall be of IP66 protected, pressure die cast aluminium housing body with optimal heat sink, with system wattage less than 25(+/-5)W with rated life of L70 @ 50,000 hours, CRI greater than or equal to 70 & with system lumens greater than 2000 and system efficiency greater than or equal to 90%.The Light fitting shall be with all required accessories suitable for mounting in on the pole arm. Weight of luminaire shall not be more than 15Kg per fitting.The luminaire should meet all the technical specifications as mentioned. The swaged pole with bracket,built-in cylindrical GI control box of same material with service door coated with epoxy zinc phosphate primer and finished with polyurethane based paint . The control gear box is prewired with DP MCB, FP connector for easy loop-in loop-out suitable for 3phase 4 wire AC supply (LT cables).The pole shall have provision for connecting the earth wire.(Make WIPRO LR 02 261 XXX 57 XX or equivalent approved make , Pole:- KLITE 8090 or equuivalent approved make).
8
-
-
Electrical Works for Bank Road Parking
-
-
-
od325708/2018_2019
"Supply, Installation, Testing and Commissioning of outdoor 125 KVA prime rated D.G Set with acoustic enclosure and Control panel ,protection and digital metering,controls and interlocks, CTs and transducers for all metering and protection and suitable FP MCCB etc. , including antivibration mountings, exhaust silencer and exhaust pipe conforming to latest environment protection regulations for emission and noise levels complete with , water/ coolant cooled, (radiator type) four stroke, electric start conforming to BS: 5514 15 KVA prime rating, brushless, self excited, self regulated and suitable for continuous operation at 1500RPM, generating 415 V+/-5% Volts at 0.8 p.f (lag), 50Hz,3 phase, 4 wire system generally conforming to BS: 2613 & IS: 4722. Both Engine and Alternator shall be mounted on common channel iron base frame, and with standard accessories such as lead acid batteries and engine driven battery charger along with leads,battery stand, necessary control wiring with control cables, first fill of lubricating oil, and earthing as per standards Fuel tank , fuel piping from fuel tank to Engine, Residential silencer, suitable size Cable termination box with extended Alternator terminal with bus bars etc as required and as per specifications.Rate shall be inclusive of all the civil work including RCC foundation. The work should be as per Electrical Inspectorate/ Pollution control board standards."
1
-
-
od325718/2018_2019
Supply, installation, testing and commissioning of energymeter box of cubicle construction made from 16SWG CRCA sheet INCLUDING one number of TOD meter with CT and 3 Nos of 63A HRC fuse,63 A FP isolator and neutral link, interconnections, providing necessary supports made from the same gauge CRCA sheet to fix energymeters, etc.The cubicle shall be provided with hinged door construction and vision panel for the meter compartment. Suitable knock out for cable entry and exit shall be provided. The entire board shall be painted with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc as required including fixing it on wall, making good the damages colour washing etc. as required.
1
-
-
od325736/2018_2019
Supply, Installation, Testing & Commissioning of MSB Panel, cubicle type, made out of 2mm thick CRCA
sheet, totally enclosed, IP42, free standing, wall / floor mounting, dust and vermin proof, powder coated,
indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system with
busbars extendable on both sides, including internal wiring with suitable size wires, rotary handle,
spreader etc. The panel shall be with all accessories as per drawing & specification.
INCOMER1
63 A TPN MCCB with Thermal Magnetic Release
INCOMER2
250 A TPN MCCB with Thermal Magnetic Release
BUSBARS
1 Set of 250AmpTPN aluminium busbars
BUS COUPLER
250 A MCCB TPN
INSTRUMENTS
2 No Three phase Digital voltmeter, Acc. Class 1
6 No Three phase Digital ammeter, Acc. Class 1
2 Set of phase indicating lamps, LED type, RYB with 6 Nos. SP MCB control.
OUTGOING
40 A TPN MCCB 25 kA with Thermal Magnetic Release - 3 nos'
200 A TPN MCCB ISOLATOR - 1 no
The panel shall be with Top/bottom entry to receive incoming & outgoing cable, all necessary
interconnection & accessories as per particular specification & single line diagram.
1
-
-
od326659/2018_2019
Main Fire Pump Panel
Supply Installation Testing and Commissioning of cubicle type floor mounted panel made out of 14 SWG
MS sheet complete with contactors, auxiliary contacts, indicating lamps, ammeters,voltmeters with
selector switches, fuses, suitable motor starter including connections complete as required : Panel shall
be enclosed and with all necessary components complete in all respects including necessary control
wiring as per the details given below
Incoming
200 Amps FP MCCB ISOLATOR - 1 no
Voltmeter 0 - 500 - 1 no
Voltmeter Selector Switch - 1 no
Ammeter ( 0 - 250A ) - 3 no.s
250/5A 15VA class 1 resin cast CT - 3 Nos
Indication Lamps (LED type )- 1 set ( 1 set of 3 Nos RYB )
Bus bar chamber with 250 Amps Aluminum Bus Bar, suitable for 3 phase and neutral system- 1 set
Required no of auxiliary contacts
Outgoing
100 Amps TPN MCCB 25 kA - 2 nos
40 Amps TPN MCCB 25 kA - 4 nos
25 A DP MCB - 2Nos
Fully automatic star delta Starter without overload relay (15kW) with LED illuminated ON OFF push
button - 1 No.
Fully automatic star delta Starter without overload relay (11kW) with LED illuminated ON OFF push
button - 2 No.
Auxiliary contacts for Main & Jockey Pumps
Auto Manual Selector Switch with Control wiring for Main, Diesel engine pump & Jockey Pump
Annunciator with hooter accept / reset & control wiring
Above panel to be supplied with suitable capacity power & control wiring to provide control power supply
in case of power failure and with all the necessary acessories for suitable operation of the pumps.
The rate shall include the cost of all the required control wirings (from pressure gauge to panel)
1
-
-
od326241/2018_2019
CABLES AND CABLING
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
3.5C 150 Sq.mm Al
102
-
-
od326249/2018_2019
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
3.5C 35 Sq.mm Al
18
-
-
od326263/2018_2019
CABLES AND CABLING
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
3 C 35 Sqmm Al
22
-
-
od325296/2018_2019
CABLES AND CABLING
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
4C 6 sqmm Al
33
-
-
od325313/2018_2019
CABLES AND CABLING
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
3C 10 Sq.mm Al
22
-
-
od325308/2018_2019
CABLES AND CABLING
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
3C 6 sqmm Al
44
-
-
9.1.26
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 150 sq. mm (50mm)
4
-
-
9.1.21
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)
2
-
-
9.1.10
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 35 sq. mm (28mm)
4
-
-
od325338/2018_2019
CABLES AND CABLING
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4C 6 Sq.mm Al
2
-
-
9.1.7
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 10 sq. mm (22mm)
4
-
-
od325348/2018_2019
CABLES AND CABLING
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3C 6 Sq.mm Al
8
-
-
7.7.1
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KVgrade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
61
-
-
7.7.3
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KVgrade of following size on wall surface as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
10
-
-
7.1.1
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size direct in ground including excavation, sand cushioning, protective covering andrefilling the trench etc as required.Upto 35 sq. mm
78
-
-
7.1.3
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size direct in ground including excavation, sand cushioning, protective covering andrefilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm
67
-
-
5.1
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providingmasonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required.
5
-
-
5.15
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
10
-
-
5.14
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
10
-
-
od325545/2018_2019
EARTHING AND SAFETY EQUIPMENTS
Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. as required. 10 SWG Cu
15
-
-
5.9
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earthelectrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
15
-
-
5.8
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earthelectrode, including connection/ terminating with nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
15
-
-
od325520/2018_2019
Supplying and laying G.I/Copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) 10 SWG Cu
14.9
-
-
Fire Fighting System for Bank Road Parking
-
-
-
od328231/2018_2019
Supply, Installation, Testing and Commissioning of diesel engine driven stand by fire pump suitable for automatic operation and consisting of following: complete in all respect as required and as per technical specification. (a) Horizontal, centrifugal, split casing type pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest oulet at specified flow of 2280 lpm at 60 m head conforming to IS 1520. (b)Suitable HP and RPM water cooled diesel engine with radiator conforming to relevant BS & IS standard complete with auto starting mechanism, 12 volts/24 Volts electric starting equipment, Diesel Tank, exhaust pipe extended upto 1 m. outside pump house duly insulated with 50 mm. thick glass wool with 1.0 mm. thick aluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads.
2
-
-
od328248/2018_2019
Supply, Installation, Testing and Commissioning of electric driven main fire pump suitable for automatic operation and consisting of following and complete in all respect as per technical specification; (a) Horizontal, centrifugal, split casing type pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest oulet at specified flow of 2280 lpm at 60 m head, conforming to IS 1520. (b)Suitable HP and RPM, Sqiurrel cage induction motor, TEFC, synchronous speed for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads complete in all respect as per technical specification.
1
-
-
od328279/2018_2019
:Supply, Installation, Testing and Commissioning of MS(Heavy C' Class) pipe IS:1239/ IS: 3589 marked including all fittings and accessories such as elbows, flanges, tees, reducers etc. conforming to IS standards complete including painting, welding, jointing and neoprene gaskets, nuts, bolts etc. as required. (for fire hydrant and sprinkler system). The pipe shall be painted with one coat of primer & two coats of post office red enamel paint. The pipe shall fixed on ceiling, walls, columns, truss etc for all heights with suitbale hangers/ supports and fasteners etc including cutting the walls/means etc and
making good the same complete as required. 80 mm dia
23
-
-
od328280/2018_2019
Supply, Installation, Testing and Commissioning of MS(Heavy C' Class) pipe IS:1239/IS: 3589 marked including all fittings and accessories such as elbows, flanges, tees, reducers etc. conforming to IS standards complete including painting, welding, jointing and neoprene gaskets, nuts, bolts etc. as required. (for fire hydrant and sprinkler system). The pipe shall be painted with one coat of primer & two coats of post office red enamel paint. The pipe shall fixed on ceiling, walls, columns, truss etc for all heights with suitbale hangers/ supports and fasteners etc including cutting the walls/means etc and
making good the same complete as required. 100 mm dia
67
-
-
od328281/2018_2019
Supply, Installation, Testing and Commissioning of MS(Heavy C' Class) pipe IS:1239/ IS: 3589 marked including all fittings and accessories such as elbows, flanges, tees, reducers etc. conforming to IS standards complete including painting, welding, jointing and neoprene gaskets, nuts, bolts etc. as required. (for fire hydrant and sprinkler system). The pipe shall be painted with one coat of primer & two coats of post office red enamel paint. The pipe shall fixed on ceiling, walls, columns, truss etc for all heights with suitbale hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required. 150 mm dia
74
-
-
od328282/2018_2019
Supply, Installation, Testing and Commissioning of MS(Heavy C' Class) pipe IS:1239/ IS: 3589 marked including all fittings and accessories such as elbows, flanges, tees, reducers etc. conforming to IS standards complete including painting, welding, jointing and neoprene gaskets, nuts, bolts etc. as required. (for fire hydrant and sprinkler system). The pipe shall be painted with one coat of primer & two coats of post office red enamel paint. The pipe shall fixed on ceiling, walls, columns, truss etc for all heights with suitbale hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required. 200 mm dia
17
-
-
od328328/2018_2019
Supply, installation, testing and commissioning of dual plate non-return valve of following diameter, PN16 conforming to API 594 with Cast iron/Cast steel body complete with all accessories including flanges, rubber gasket, bolts, nuts, washers etc. complete as required. 150 mm dia
6
-
-
od328329/2018_2019
Supply, installation, testing and commissioning of dual plate non-return valve of following diameter, PN16 conforming to API 594 with Cast iron/Cast steel body complete with all accessories including flanges, rubber gasket, bolts, nuts, washers etc. complete as required and as per technical specification. 200 mm dia
1
-
-
od328330/2018_2019
Supply, laying, testing and commissioning of 'C' class heavy duty MS pipe of following size conforming to IS 1239 including fittings like elbows, tees, tapers, flanges, nuts/bolts, gaskets etc., in ground at a depth of 1m from ground level including excavation & providing cement concrete blocks as supports at 3m intervals, anticorrosive wrapping coating of 4mm thickness as per IS10221, refilling the trench etc. of following sizes complete as required. 80 mm dia
7
-
-
od328332/2018_2019
Supply, laying, testing and commissioning of 'C' class heavy duty MS pipe of following size conforming to IS 1239 including fittings like elbows, tees, tapers, flanges, nuts/bolts, gaskets etc., in ground at a depth of 1m from ground level including excavation & providing cement concrete blocks as supports at 3m intervals, anticorrosive wrapping coating of 4mm thickness as per IS10221, refilling the trench etc. of following sizes complete as required. 150 mm dia
274
-
-
od328333/2018_2019
Supply, Installation, Testing and Commissioning of MS(Heavy C' Class) pipe IS:1239/ IS: 3589 marked including all fittings and accessories such as elbows, flanges, tees, reducers etc. conforming to IS standards complete including painting, welding, jointing and neoprene gaskets, nuts, bolts etc. as required. (for fire hydrant and sprinkler system). The pipe shall be painted with one coat of primer & two coats of post office red enamel paint. The pipe shall fixed on ceiling, walls, columns, truss etc for all
heights with suitbale hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required. 25 mm dia
110
-
-
od328334/2018_2019
:Supply, Installation, Testing and Commissioning of MS(Heavy C' Class) pipe IS:1239/ IS: 3589 marked including all fittings and accessories such as elbows, flanges, tees, reducers etc. conforming to IS standards complete including painting, welding, jointing and neoprene gaskets, nuts, bolts etc. as required. (for fire hydrant and sprinkler system). The pipe shall be painted with one coat of primer & two coats of post office red enamel paint. The pipe shall fixed on ceiling, walls, columns, truss etc for all heights with suitbale hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required. 32 mm dia
55
-
-
od328335/2018_2019
Supply, Installation, Testing and Commissioning of MS(Heavy C' Class) pipe IS:1239/IS: 3589 marked including all fittings and accessories such as elbows, flanges, tees, reducers etc. conforming to IS standards complete including painting, welding, jointing and neoprene gaskets, nuts, bolts etc. as required. (for fire hydrant and sprinkler system). The pipe shall be painted with one coat of primer & two coats of post office red enamel paint. The pipe shall fixed on ceiling, walls, columns, truss etc for all
heights with suitbale hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required. 40 mm dia
106
-
-
od328336/2018_2019
Supply, Installation, Testing and Commissioning of MS(Heavy C' Class) pipe IS:1239/ IS: 3589 marked including all fittings and accessories such as elbows, flanges, tees, reducers etc. conforming to IS standards complete including painting, welding, jointing and neoprene gaskets, nuts, bolts etc. as required. (for fire hydrant and sprinkler system). The pipe shall be painted with one coat of primer & two coats of post office red enamel paint. The pipe shall fixed on ceiling, walls, columns, truss etc for all
heights with suitbale hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required. 50 mm dia
74
-
-
od328337/2018_2019
:Supply, Installation, Testing and Commissioning of MS(Heavy C' Class) pipe IS:1239/ IS: 3589 marked including all fittings and accessories such as elbows, flanges, tees, reducers etc. conforming to IS standards complete including painting, welding, jointing and neoprene gaskets, nuts, bolts etc. as required. (for fire hydrant and sprinkler system). The pipe shall be painted with one coat of primer & two coats of post office red enamel paint. The pipe shall fixed on ceiling, walls, columns, truss etc for all
heights with suitbale hangers/ supports and fasteners etc including cutting the walls/means etc and making good the same complete as required. 65 mm dia
7
-
-
od328423/2018_2019
:Supply and installation of glow signage (photoluminescent)of "3M" Make "FIRE ASSEMBLY POINT" of standard size (500*200 MM) as per conventional design/ colour code on 4 mm thick foam sheet. The signage shall be either fixed on the wall with the help of screws/double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required.
2
-
-
od328424/2018_2019
Supply and fixing of Fire Emergency Evacuation Plan (Color) Printed in Photo Paper of Size A2 sandwitched in Clear acrylic sheets fixed using SS Studs and other accessories complete as required.
7
-
-
od328425/2018_2019
:Supply and installation of glow signage (photoluminescent)of "3M" Make such as Emergency Exit/Fire Exit signage etc. of standard size (500*200 MM) as per conventional design/ colour code on 4 mm thick foam sheet. The signage shall be either fixed on the wall with the help of screws/double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required.
14
-
-
od328426/2018_2019
Supply, installation, testing and commissioning of wall/ceiling mounted 6W speaker including all necessary accessories complete as required.
15
-
-
od328427/2018_2019
:Supply, installation, testing and commissioning of wall mounted talk back unit including all necessary accessories complete as required.
15
-
-
od328429/2018_2019
Supply and laying of 25mm dia PVC conduit along with accessories like PVC bends,couplers,junction box,fastners, iron staples/saddles/screws,in surface/ recess including cutting the wall/ceiling and making good the same in case of recessed conduit etc. complete as required.
20
-
-
od328430/2018_2019
Supply and laying of 2x 1.5sq.mm armoured Copper FRLS cable ISI marked with proper clamping, supports and terminations appropriately above ground .
773
-
-
od328432/2018_2019
Supply, installation, testing and commissioning of conventional type Hooter with a minimum sound level of 80db at 10ft distance,interconnecting to loop cable complete as required.
16
-
-
od328433/2018_2019
:Supply, installation, testing and commissioning of Conventional type Manual Call Point Resettable type via Special Key interconnecting to loop cable as required
16
-
-
od328434/2018_2019
:Supply and installation of Carbon-dioxide extinguisher of ISI marked 4.5 Kg capacity made of high pressure seamless steel cylinder (CCE marked ) complete with wheel type valve with one meter long braided high pressure discharge hose complete in all respects including initial fill with CO2 gas.
1
-
-
od328435/2018_2019
:Supply and installation of ISI marked ABC Stored pressure type Fire Extinguisher 5 Kgs Capacity Mono Ammonium Phosphate based Dry Chemical Powder for Fighting ABC Class of Fire, stored Pressure type of Mild steel body pressurized by Nitrogen Gas. The Extinguisher shall have pressure gauge for indicating inside pressure with opening and closing lever of squeeze grip type with tamper proof seal, complete with wall bracket.
19
-
-
od328436/2018_2019
Supply, Installation, Testing and Commissioning of 150mm dia Sprinkler alarm valve of Cast iron body and bronze working parts comprising of water motor alarm, bronze seat clapper, and clapper arm, hydraulically driven mechanical gong bell to sound continuous alarm when the Wet riser/Sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, GI pipe of required size, flanges, orifice plate, gasket etc. complete as required.
1
-
-
od328437/2018_2019
:Supply, installation, testing and commissioning of sprinkler heads Standard response, standard coverage HORIZONTAL SIDEWALL sprinkler ;1/2" NPT, K-5.6, Chrome Finish; operating temperature at 68 deg. C.
144
-
-
od328438/2018_2019
Supply, installation, testing and commissioning of 25mm air release valve with all the necessary accessories complete as required.
3
-
-
od328439/2018_2019
:Supply, installation, testing and commissioning of 4 way fire brigade collective breaching with 4 nos. gun metal male instantaneous inlet couplings complete with cap and chain as required for 150mm dia flanged out let connection and built in check valves complete in all respects as required by the standard specifications.
3
-
-
od328440/2018_2019
Supply, installation, testing and commissioning of hose boxes wall/pedestal type of size 750 x 250 x 600mm made out of 16 SWG MS sheet steel with front side glass, locking arrangement and painted with approved colour completed as required and as per specifications. The pedestal shall be made of suitable channel with MS supports and mounted on a PCC foundation on ground.
18
-
-
od328441/2018_2019
Supply, installation, testing and commissioning of 63 mm dia Gun metal branch pipe with 20 mm (nominal internal diameter) size Gun Metal nozzle conforming to IS 903, suitable for instantaneous connection to inter-connect hose pipe coupling complete as required.
18
-
-
od328442/2018_2019
:Supply, installation, testing and commissioning of 63 mm dia, 15 mtr. Long RRL hose pipe with 63 mm dia Male and Female Gun metal couplings duly binded with wire, rivets etc. conforming to IS 636 (type-A) complete as required. (Note: the rate shall include cost of necessary supports for placing the hoses inside the shaft)
36
-
-
od328443/2018_2019
"Supply, installation, testing and commissioning of First-aid Hose Reel with MS construction spray painted in Post office Red, conforming to IS 884 with up to date amendments, complete with the following as required.
(a) 30 m. long 20 mm (nominal internal dia water hose Thermoplastic (Textile reinforced) Type-2 as per IS: 12585 (b) 20 mm (nominal internal ) dia gun metal globe valve & nozzle. (c) Drum and brackets for fixing the equipments on wall. (d) Connections from riser with suitable dia stop valve (gun metal) & M.S. Pipe"
12
-
-
od328444/2018_2019
:Supply, installation, testing and commissioning of gun metal fire hydrant valve, single headed oblique type 63 mm instantaneous outlets with female socket for hose connection and inlet side with flange suitable for 80 mm pipe flange, valve conforming to 1S:5290 complete with blank cap chain, etc complete as required.
18
-
-
od328445/2018_2019
:Supply, installation, testing and commissioning of air vessel made of 250 mm dia 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.
1
-
-
od328446/2018_2019
Supply, installation, testing and commissioning of Y strainer with CI body, following size confirming to IS specifications complete with gaskets, seal and accessories complete in all respect as per technical specification. 200 mm dia
1
-
-
od328447/2018_2019
Supply, installation, testing and commissioning of butterfly valve PN 16, with Cast iron/Carbon steel body complete with all accessories including flanges, rubber gasket, bolts, nuts, washers etc. complete as required and conforming to IS 13095.
2
-
-
od328448/2018_2019
Supply, installation, testing and commissioning of butterfly valve PN 16, with Cast iron/Carbon steel body complete with all accessories including flanges, rubber gasket, bolts, nuts, washers etc. complete as required and conforming to IS 13095. 80 mm dia
2
-
-
od328449/2018_2019
Supply, installation, testing and commissioning of butterfly valve PN 16, with Cast iron/Carbon steel body complete with all accessories including flanges, rubber gasket, bolts, nuts, washers etc. complete as required and conforming to IS 13095. 100 mm dia
7
-
-
od328450/2018_2019
Supply, installation, testing and commissioning of butterfly valve PN 16, with Cast iron/Carbon steel body complete with all accessories including flanges, rubber gasket, bolts, nuts, washers etc. complete as required and conforming to IS 13095. 150 mm dia
14
-
-
od328451/2018_2019
Supply, installation, testing and commissioning of butterfly valve PN 16, with Cast iron/Carbon steel body complete with all accessories including flanges, rubber gasket, bolts, nuts, washers etc. complete as required and conforming to IS 13095. 200 mm dia
2
-
-
od328452/2018_2019
Supply, installation, testing and commissioning of dual plate non-return valve of following diameter, PN16 conforming to API 594 with Cast iron/Cast steel body complete with all accessories including flanges, rubber gasket, bolts, nuts, washers etc. complete as required. 65 mm dia
2
-
-
od328453/2018_2019
:Supply, installation, testing and commissioning of dual plate non-return valve of following diameter, PN16 conforming to API 594 with Cast iron/Cast steel body complete with all accessories including flanges, rubber gasket, bolts, nuts, washers etc. complete as required. 100 mm dia
1
-
-
od328527/2018_2019
Supply and installation of glow signage (photoluminescent)of "3M" Make such as FIRE ORDER signage of size 500*800 MM as per conventional design/ colour code on 4 mm thick foam sheet. The signage shall be either fixed on the wall with the help of screws/double tape or hanged from the false ceiling with the help of chain & screws etc. complete as required.
6
-
-
od328528/2018_2019
Supply, installation, testing and commissioning of public address and talk back system consisting of 6 zone public address cum talkback console with mike and selector. 6 channel talk back master control panel with 2x16 character LCD display,power supply, battery charger, battery housing, 80 W PA & mic, 6 channel selector with all call and mic on. The console shall be provided with suitbale capacity amplifier (min 80W) and suitable capacity battery (min 12V) all assembled in a cabinet and meeting the technical
specifications. The rate shall include the cost of all the necessary accessories as required for the operation of the system.
1
-
-
od328529/2018_2019
:Supply, installation, testing and commissioning of Conventional Type 8 zone manual operated Fire Alarm Panel including battery backup. The panel shall be microprocessor based with its own micro controller, memory, communication module etc.The panel shall have Keypad operation, L C D unit to indicate Fire / Fault Signal of individual unit, etc complete in all respects. The item shall include 24 Volts sealed lead acid battery sufficient for 24 hrs back up with battery charger.
1
-
-
od328530/2018_2019
Supply, laying, testing and commissioning of 'C' class heavy duty MS pipe of following size conforming to IS 1239 including fittings like elbows, tees, tapers, flanges, nuts/bolts, gaskets etc., in ground at a depth of 1m from ground level including excavation & providing cement concrete blocks assupports at 3m intervals, anticorrosive wrapping coating of 4mm thickness as per IS10221, refilling the trench etc. of following sizes complete as required and as per technical specification. 100 mm dia
17
-
-
od328531/2018_2019
Supply, installation, testing and commissioning of industrial type pressure switch having 1/4" BSP(F) connection IP:32 enclosure protection, phosphor bronze bellows as sensing element, SDPT contact system, switch rating 6A Inductive/lOA resistive 380 V AC, 0.2A Inductive/10A resistive 250V DC suit with ball valve etc. complete as required.
5
-
-
od328532/2018_2019
Supply, installation, testing and commissioning of pressure gauge 0-200 PSI ( 0 - 14 Kg ) range, 3/8" BSP bottom entry, 4" dial weather proof with stainless steel internals, siphon tube including all necessary fittings etc. complete as required.
6
-
-
od328533/2018_2019
Supply, Installation, Testing and Commissioning of electric driven pressurisation pump (Jockey Pump ) suitable for automatic operation and consisting of following: complete in all respect as required as per technical specification. (a) Horizontal, centrifugal end suction type pump of cast iron body and stainless steel impeller with stainless steel shaft, mechanical seal and having a flow of 180 lpm at 60m head conforming to IS 1520 (b)Suitable HP and RPM Sqiurrel cage induction motor, TEFC, suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation as required duly plastered with anti vibration pads.
2
-
-
ood329405/2018_2019
Supply, installation, testing and commissioning of electric driven pump set (terrace pump) and consisting of following: complete in all respect as required. Monoblock Pump rated for 900 lpm, 40m head C.I body, bronze/Gun metal impeller,SS shaft with mechanical seal, volute type with suitable HP SQ cage induction motor, suitable for operation on 415V, 3phase 50Hz, AC with IP 55 class of protection for enclosure, horizontal foot mounted type with class F insulation.M.S. fabricated common base plate, foundation bolts, anti vibration pads etc. as required. The cost shall include suitbale capacity DOL or star delta starter and one isolator near the pump with required accessories.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements