Hyderabad Metropolitan Water Supply And Sewerage Board Tender

Providing repairs and replacement of various hardware accessories;c. Door Mats (3.5' Depth X 4' Length x 6Nos)=84 sqft etc., complete as directed by department officers.

Providing repairs and replacement of various hardware accessories;b. Door Mats (6.5' Depth X 4'Length x 4 Nos)=104 sqft etc., complete as directed by the departmental officers.

Providing repairs and replacement of various hardware accessories;Supply, Delivery and laying of 12mm thickness of Rubber Coir Door Mats, 4 MM Thickness off Rubber to not move the mats, 8 MM Thickness coir of various sizes at ground & I floors of front admin. building block entrance areas & office cabins of ground floor of rear block,.including cost, conveyance, labour Charges, weastage, cuttings Transportation charges loading and unloading, shifting etc., complete as directed by the departmental officers. a. Door Mats (6'.5" Depth X 4'Length x 2 Nos)=52sqft.

Providing repairs and replacement of various hardware accessories;Supply delivery and fixing of new fabric Roller blinds thickness is made up of 1.5mm fabric and bottom metal plate is for the weight to not do not the move the roller blinds. metal plate is with power coated, roller caps to roll the blinds for up and down etc.,,. at command control center full height glass partition cabin at ground floor of front admin blg block. to resist heat and surn rays for the existing window structural glazed glasses from out side in place of damaged & unservicable, vertical venetion blinds, after deducting cost of old materials and including cost, transportation,cutting wastage, loading &unloading, conveyance, labour charges etc.,complete as directed by the departmental officers.(32'L X 8'H =256sqft).

Providing repairs and replacement of various hardware accessories;supply, delivery and fixing of new 21 (mm) thickness off MDF Board 3 Drawer mobile pedestal units fixing with 1(MM) star screws with high standerd locking clips. with godrej locks and high standerd stain less steel handel's.fitting with Godrej Skilled Technicians along with nessery accessories.at O/o CGM(engg) transmission circle at III rd floor of front & admin building block. and including cost,conveyance, transportation, loading & unloading, labour charges,packing, fitting Charges etc.,complete as directed by the departmental officers. Dimensions:Height 700mm x depth 450 mm length 400 mm.

Providing repairs and replacement of various hardware accessories;Supply, delivery and fixing of new medium back executive revolving chair, Back side off chair is with full mesh and along with lumbor support to back mesh.seat is made up off mesh with cushion.powder coated metal base. Hy standered nylon wheel's 5No's.anti tilting mechanisam to chair for up and down & and to back to front and back to adjust.Hydrolic rod system's.at various sections for the O/o CGM(P&A), GM (P&A) inplace of damaged for providing seating arrangements wing III floor of front admin Building block, including packing, cost & conveyence,transportation, loading & unloading, assembeld with skilled technicians etc., complete as directed by departmental officers.

Providing repairs and replacement of various hardware accessories;Manufacturing, Supply, delivery & Fixing of plain office almirah at O/o GM (Engg) SWC ground floor of rear admin building block.of size 6? X 6? height X 36? width X 19 ? depth having 5 compartments of 70-75 Kgs of gross weight. The top of compartments are designed for storing box type files in standing position the bottom compartment to keep loose stationary and flat files. The almarah is fabricated with CRCA sheet. The doors made of 20 Guage and the body and shelf of 22 guage . The almarah is powder quoted paint including hardware material's and stain less steel handel with stain less steel plate with heavy duty godrej make lock set with . packing, forwarding, loading, unloading, lifting and transportation charges and including cost, conveyance,labour charges etc., complete as directed by the departmental officers.

Providing repairs and replacement of various hardware accessories;e. Technician charges including dismantling the old material and re fitting & testing new material to existing Godrej chairs (2Men x 8 Days= 16 Mendays) etc., complete as directed by the departmental officers.

Providing repairs and replacement of various hardware accessories;d. Godrej make mid back chairs (handles) right & left etc., complete as directed by the departmental officers.

Providing repairs and replacement of various hardware accessories;c. Godrej make mid back chairs metal wheel base etc., complete as directed by the departmental officers.

Providing repairs and replacement of various hardware accessories;b. Godrej make mid back chairs ( nylon wheels : 5 no?s) replacement to rotate a chair etc., complete as directed by the departmental officers.

Providing repairs and replacement of various hardware accessories;Supply, delivery, fixing and testing of various parts to existing Godrej make Midium & High back executive revolving chairs for seating arrangement O/o CGM (Engg), STP-1, main conference hall at ground, I floors of front admin. block, in place of damaged and unserviceable spare parts after deducting cost of old materials with necessary labour charges, cost, conveyance, transportation, loading & unloading, dismantling and re fixing with skilled technicians etc., complete as directed by the departmental officers. a. Godrej make mid back chairs (Hydraulic rod) replacement for to adjust chair seat to up & down etc., complete as directed by the departmental officers.