Central Public Works Department Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 4,21,501Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of Office Building And Residential Quarters For Sib At Davangere Sh Construction Of Office Building 3 Nos Type Ii 2 Nos Type Iii And 1 No Type Iv Quarters Including Internal Water Supply Sanitary Installation Drainage Development
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
07/HCD/SE/EE/e-Tender/2020-21-01Tender No
07/HCD/SE/EE/e-Tender/2020-21-01Tender Authority
Central Public Works Department ViewPurchaser Address
-Website
http://https://cpwd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, as directed by Engineer-in-Charge:
-
-
-
All kinds of soil
159
28914
181.85
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
All kinds of soil.
505.86
127628
252.3
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
-
-
-
All kinds of soil
-
-
-
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
100
36420
364.2
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
510
112022
219.65
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
-
-
-
All kinds of soil
170
15368
90.4
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
40
78122
1953.05
CONCRETE WORK
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:5:10 (1 portland pozzolona cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
44
242893
5520.3
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing :
-
-
-
1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
0.5
4277
8554.5
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).
48
16699
347.9
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
48
5280
110
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.
160
98248
614.05
REINFORCED CEMENT CONCRETE
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
195
55546
284.85
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
80
48744
609.3
Suspended floors, roofs, landings, balconies and access platform
572.62
396854
693.05
Lintels, beams, plinth beams, girders, bressumers and cantilevers
720
397476
552.05
Columns, Pillars, Piers, Abutments, Posts and Struts
462
338969
733.7
Stairs, (excluding landings) except spiral-staircases
54.72
34055
622.35
Edges of slabs and breaks in floors and walls
-
-
-
Under 20 cm wide
150
25988
173.25
Weather shade, Chajjas, corbels etc., including edges
215
164851
766.75
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
10000
750000
75
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500 D or more.
23100
1732500
75
Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand).
446
101398
227.35
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,improve workability without impairing strength and durability as per direction of the Engineer-in-charge.
-
-
-
(Note1 :- Contractor shall use PPC (conforming to IS 1489 part-1. The fly ash constituent shall be not less than 30% and not more than 35% ny mass of Portland Pozzolona cement.). (Note2: Cement content considered in this item is @330 kg/cum. Cost adjustment @ the rate of Rs. 7.50 / kg of portland pozzolona cement shall be made towards excess/less use of cement in the design mix as per mix design.)
-
-
-
All works upto plinth level
121.55
1020856
8398.65
All works above plinth level and upto floor V level
210
2058462
9802.2
STONE WORK
-
-
-
Size stone masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
157
960966
6120.8
Size stone masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
29
217209
7489.95
MARBLE WORK-GRANITE WORK
-
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
-
-
-
Polished Granite stone slab Tan brown
18
43200
2400
Providing and laying flamed finish granite stone flooring in required design and patteren in linear as well as curvilinear portion of the building all complete as per the architechture drawing with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 portland pozzolina cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :
-
-
-
Ivory gold granite stone slab(using single piece for staircase treads )
70
196000
2800
Providing and fixing 18 mm thick gang saw cut mirror polished (pre polished) machine cut granite stone (sample granite shall be apporved by Engineering incharge) of required size, shape, color, and texture in skirting over 12 mm thick bed of cement mortar 1:3 (1 portland pozzolina cement : 3 coarse sand) and jointed with cement slurry at 3.3 kg/sqm including pointing in white cement mixeed with pigment of matching shade complete.
-
-
-
Granite stone of Tan Brown
24
57600
2400
Providing and fixing 18 mm thick gang saw cut mirror polished (pre polished) machine cut granite stone (sample granite shall be apporved by Engineer-in-charge) of required size, shape, color, and texture in risers of steps skirting over 12 mm thick bed of cement mortar 1:3 (1 portland pozzolina cement : 3 coarse sand) and jointed with cement slurry at 3.3 kg/sqm including pointing in white cement mixeed with pigment of matching shade complete.
-
-
-
Granite stone of Tan Brown(using single piece for risers)
23.7
56880
2400
Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of equired size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
-
-
-
Jet Black Granite
-
-
-
Area of slab over 0.50 sqm
10
26000
2600
Providing edge molding 18 mm thick marble stone counters, vanities ets., including machine polishing to edge to give high gloss finish etc complete and as per the design approved by the engineer- incharge.
-
-
-
Granite work
150
42999
286.66
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
3
2204
734.55
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
-
-
-
Sadaralli gray granite flame finsihed (Ramp portion)
237
521400
2200
WOOD AND P.V.C. WORK
-
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
-
-
-
Second class teak wood
0.6
78110
130183.05
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
-
-
-
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
150.15
454046
3023.95
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
15
6021
401.4
Providing and fixing M.S. grills of required pattern in openings of windows with M.S. flats, square or round bars etc. all complete.
-
-
-
Fixed to openings with lugs fixed in cement concrete blocks 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 12.5mm ) of size 7.5 x 7.5 x 10 cm
2600
477100
183.5
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
138
24730
179.2
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
25
2668
106.7
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
2
1703
851.6
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
-
-
-
300x16 mm
28
7200
257.15
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
250x10 mm
23
2382
103.55
150x10 mm
58
4350
75
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
125 mm
116
6919
59.65
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
75
41250
550
Providing and fixing to existing door frames.
-
-
-
30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.
-
-
-
G.I fasteners 100 X 8 mm size for fixing frames to finished wall,plastic packers,plastic caps and necessary stainless steel screws etc. profile of frames & sash shall be mitred cut and fusion weled at all corners, mullion(if required)shall be also fusion welded including drilling of holes for fixing hardware's and drainage finished wall shall be filled with weather prooof silicon sealant over backer rod of required size and of approved quality, all complte as per approved drawing & direction of Engineer-in-Charge.(Single/double glass panes and silicon sealant shall be paid separately) Note: For UPVC frame,sash and mullion extrude profiles minus 5% tolerance in dimension i,e. in depth & width of profile shall be acceptable.
25.2
68040
2700
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
-
-
-
25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
39
69512
1782.35
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.
-
-
-
50 mm
24
6991
291.3
Providing and fixing SS304 grade matt finished Stainless steel curtain rods heavy duty with two decoraive type SS brackets fixed with C.P.brass screws and wooden plugs, etc., wherever necessary complete :
-
-
-
25 mm dia
50
24008
480.15
STEEL WORK
-
-
-
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
-
-
-
Using M.S. angels 40x40x6 mm for diagonal braces
7
30997
4428.15
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
200
26200
131
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
600
345270
575.45
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
-
-
-
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
20
2129
106.45
FLOORING
-
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
225
231818
1030.3
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
50
49835
996.7
Providing and laying double charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
-
-
-
Size of Tile 600x600 mm
313
469672
1500.55
Providing and laying double charged Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.
-
-
-
Size of Tile 600x600 mm
31
41850
1350
52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
22
17325
787.5
ROOFING
-
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
110 mm diameter
61
18608
305.05
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
Bend 87.5°
-
-
-
110 mm bend
7
909
129.85
Shoe (Plain)
-
-
-
110 mm Shoe
7
797
113.8
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
110 mm
61
17617
288.8
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
7
331
47.25
FINISHING
-
-
-
12 mm cement plaster of mix :
-
-
-
1:6 (1 cement: 6 fine sand)
940
238995
254.25
15 mm cement plaster on the rough side of single or half brick wall of mix :
-
-
-
1:6 (1 cement: 6 fine sand)
516
151111
292.85
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
-
-
-
Two coats
940
107066
113.9
Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
-
-
-
Two coats
199.64
17469
87.5
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.
-
-
-
With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ litre
105
3988
37.98
Finishing walls with Acrylic Smooth exterior paint of required shade :
-
-
-
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
516
61920
120
20 mm cement plaster of mix :
-
-
-
1:6 (1 cement: 6 coarse sand)
40
14404
360.1
Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :
-
-
-
Flush/ Ruled pointing
450
128430
285.4
ROAD WORK
-
-
-
Making bell mouth opening/ entrance of size 100x50x50 cm for drainage pipe under footpath, including providing cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) for shape of bell mouth, including plastering providing and fixing precast R.C.C./ S.F.R.C. slab including plastering with cement mortar 1:3 (1 cement : 3 fine sand) of 6 mm thickness on exposed surface of the slab & bell mouth including centring, shuttering & neat cement punning inside the bell mouth etc. all complete.
2
4963
2481.6
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
4
33505
8376.15
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
300
257805
859.35
SANITARY INSTALLATIONS
-
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
-
-
-
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
5
27108
5421.5
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid
4
26740
6685
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
7
21614
3087.7
Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required:
-
-
-
White glazed fire clay kitchen sink of size 600x450x 250 mm
3
9490
3163.25
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
Flexible pipe
-
-
-
32mm dia
7
708
101.1
Providing and fixing 6mm thick mirrors of superior glass (of approved quality) and of required shape and size with PVC moulded frame of approved make and shade with 6mm thick hard board backing :
-
-
-
Rectangular shape of required size and numbers
7
7842
1120.25
Providing and fixing toilet paper holder :
-
-
-
C.P. brass
4
2335
583.75
Providing and fixing soil, waste and vent pipes :
-
-
-
100 mm dia.
-
-
-
Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989.
79
86284
1092.2
Providing and fixing bend of requird degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.
-
-
-
100 mm dia
-
-
-
Sand cast iron S&S as per IS - 3989
12
5540
461.65
Providing and fixing plain bend of required degree
-
-
-
100 mm
-
-
-
Sand cast iron S&S as per IS - 3989
10
3908
390.75
Providing and fixing heel rest sanitary bend
-
-
-
100 mm
-
-
-
Sand cast iron S&S as per IS - 3989
4
1729
432.2
Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :
-
-
-
100x100x100x100 mm
-
-
-
Sand cast iron S&S as per IS - 3989
2
1766
882.75
Providing and fixing double equal plain junction of required degree
-
-
-
100x100x100x100 mm
-
-
-
Sand cast iron S&S as per IS - 3989
6
5194
865.7
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
-
-
-
100x100x100 mm
-
-
-
Sand cast iron S&S as per IS - 3989
6
4335
722.55
Providing and fixing single equal plain junction of required degree
-
-
-
100x100x100 mm
-
-
-
Sand cast iron S&S as per IS - 3989
5
3339
667.7
Providing and fixing terminal guard :
-
-
-
100 mm
-
-
-
Sand cast iron S&S as per IS - 3989
4
1558
389.4
Providing and fixing (900mm long arm) trap of self cleansing design with stainless steel grating complete, including cost of cutting and making good the wall and floors:
-
-
-
100 mm inlet and 100 mm outlet
-
-
-
Sand cast iron S&S as per IS - 3989
17
25713
1512.55
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
-
-
-
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
13
7220
555.35
Providing and fixing M.S.holder bat clamp of approved design to sand cast iron / cast iron (spun) pipes comprising of M.S.flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4nos, 6mm diameter expansion hold fasteners including drilling necessary holes in brick wall / CC / RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x 1.60mm galvanised M.S.flats of specified shape and of total length 420mm and shall be fixed with M.S.nuts, bolts & washers of size 25x6mm, one bolt on each side of the pipe.
-
-
-
Total bracket length 580mm of approved shape and design. (for single 100mm dia pipe)
45
11151
247.8
WATER SUPPLY
-
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
-
-
-
25 mm nominal outer dia Pipes
125
46150
369.2
32 mm nominal outer dia Pipes
115
55263
480.55
40 mm nominal outer dia Pipes
130
84318
648.6
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.
-
-
-
20 mm nominal outer dia Pipes
65
31080
478.15
25 mm nominal outer dia Pipes
100
56195
561.95
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
-
-
-
40 mm nominal outer dia Pipes
140
75145
536.75
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
25 to 40 mm nominal bore
2
1347
673.45
Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).
2
1213
606.55
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
25 mm nominal bore.
8
3977
497.15
32 mm nominal bore.
7
4069
581.25
40 mm nominal bore
5
3392
678.4
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
25 mm nominal bore
7
2758
394
Providing and fixing gun metal non- return valve of approved quality (screwed end) :
-
-
-
32 mm nominal bore
-
-
-
Horizontal
6
3851
641.75
Vertical
6
4252
708.65
40 mm nominal bore
-
-
-
Horizontal
4
3170
792.4
Vertical
4
3919
979.7
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
45 cm length
-
-
-
20 mm nominal bore
13
1305
100.4
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
With common burnt clay F.P.S.(non modular) bricks of class designation 5.0
2
3165
1582.45
Providing and fixing PTMT, push cock of approved quality and colour.
-
-
-
15 mm nominal bore, 98 mm long, weighing not less than 75 gms
6
627
104.5
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
Circular type
-
-
-
100 mm nominal dia
23
872
37.9
Providing and fixing C.P. brass long body bib cock of approved
quality conforming to IS standards and weighing not less than 690 gms.
-
-
-
15 mm nominal bore
19
10495
552.35
Providing and fixing C.P. brass angle valve with wall flange for basin mixer and geyser points of "Jaquar" Continental Model No.053 or equivalent as directed by the Engineer-in-charge.
-
-
-
15 mm nominal bore
12
6384
532
Providing and fixing 15mm dia CP Brass (Health Faucet) with 8mm dia 1.00 m long flexible tube with wall hook of "Jaquar" Allied Model No. 573 or equivalent with necessary CP brass screws etc complete as directed by the Engineer-in-Charge.
11
16442
1494.7
DRAINAGE
-
-
-
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
150 mm dia. R.C.C. pipe
150
69390
462.6
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 5.0
10
109051
10905.05
Extra for depth for manholes :
-
-
-
Size 90x80 cm
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 5.0
3
22509
7503
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
-
-
-
For pipes 250 to 300 mm diameter
1
717
717.3
Supplying and fixing C.I. cover without frame for manholes :
-
-
-
455x610 mm rectangular C.I. cover (light duty) the weight
of the cover to be not less than 23 kg
2
2653
1326.25
ALUMINIUM WORK
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
For fixed portion
-
-
-
Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
276.66
128564
464.7
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
521.2
289240
554.95
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
With float glass panes of 6 mm thickness
4
5186
1296.4
With float glass panes of 4.00 mm thickness
105
104958
999.6
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
-
-
-
With stainless steel cover plate minimum 1.25 mm thickness
2
4825
2412.5
WATER PROOFING
-
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
-
-
-
d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
-
-
-
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
270
377595
1398.5
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
50
35285
705.7
NON SCHEDULE ITEMS
-
-
-
Precast Cement Concrete solid block masonry work with Blocks of size 400 x 200 x 200 mm having minimum compressive strength not less than 50 kg/Sq.cm in foundation & plinth all complete as per particular specification and direction of Engineer in charge.
-
-
-
with cement mortar 1:6 (1 portland pozzolona cement : 6 coarse sand)
17.85
122109
6840.86
Note : The cement concrete blocks shall contain miniumum of 40% flyash by volume of blocks.
-
-
-
Precast Cement Concrete solid block masonry work with Blocks of size 400 x 200 x 200 mm having minimum compressive strength not less than 50 kg/Sq.cm in superstructure all complete as per particular specification and direction of Engineer in charge.
-
-
-
with cement mortar 1:6 (1 portland pozzolona cement : 6 coarse sand)
222
1530379
6893.6
Note : The cement concrete blocks shall contain miniumum of 40% flyash by volume of blocks.
-
-
-
Precast Cement Concrete solid block masonry work with Blocks of size 400 x 100 x 200 mm having minimum compressive strength not less than 50 kg/Sq.cm in superstructure all complete as per particular specification and direction of Engineer in charge.
-
-
-
with cement mortar 1:6 (1 portland pozzolona cement : 6 coarse sand)
243.5
193203
793.44
Note : The cement concrete blocks shall contain miniumum of 40% flyash by volume of blocks.
-
-
-
Preparation of structural design & drawings for complete scope of building(GF+3Floor) in subject shall be based on approved architectural drawings and as per latest BIS Code i.e IS: 456-2000, IS: 1893-2002, IS 3370 etc. by using latest design software ie STAAD PRO. a) The complete design basis report, structural analysis and design, detailing of drawings shall be vetted through any govt. institutiions such as IIT, NIT, Govt of Engineering college Etc. b) The contractor shall be fully responsible for the stability and safety of structure. c) Complete Drawings shall be got approved (proof check) with in 20 days from the stipulated start of work.
d) Scope includes Foundation, column, Plinth beam, roof slab, Overhead water tank slab, Mumty slab, staircase, Lift pit, Lift wall, Fins, drops, lintel beam, balconies, drains, UG sump, Septic tank, compound wall etc. and all other drawing required for successful completion of the project .
-
-
-
e) The contractor shall submit all vetted drawings 6 sets, each in A1 size colour print (subject to the requirement of Engineer -in -charge) and soft copy of all drawings shall be copied in CD and submitted to the Engineer -in -charge. f) The rate is inclusive of all charges like, calculation, preparation, editing, drawing, ( revision & corrections if found necessary ) for all proof check and prints etc , complete.
All rights reserved to Engineer in charge for any correction and modification.
1
150000
150000
CIVIL TOTAL
17410464
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements