Directorate Of Urban Local Bodies Tender

Bridge Ladder: 10`Lx 2`W x 6`H. Horizontal ladder is of m.s pipe 2`, ` and vertical ladder is of same material of 12 gauge ISI mark with suitable PU Primer and PU Paints. Complete item with GST, Transportation, Installation with C.C and labor at site

6 No. Ornamental Design FRP Molded Pillar FRP base pedestal with vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 20mm drilled in the base with hold fasts and having B class vertical M.S pipe of size 88 mm and height 2890mm, the central m.s pipe holds FRP Molded taj 6no of size 260 x 260 x 210mm high suitably mounted at appropriate height complete as per design. Complete pillar suitably grinded and subsequently spray painted with two coats of P.U Paints in required shade. (ii) 12 No. spndred and 6 no. Friezes Floral and Ornate decorative design combination of spandrel and frieze, matched to be suspended between two m.s pillars as per the design. The spandrel (L-Bracket) having length 420mm and height 400mm the frieze (Top Panel) height 250mm and length as per the size of the gazebo. The frieze mounted on m.s tabular pipe frame of size 50mm x 25mm, frieze properly welded to the column pillars at either ends. Complete set of spandrel and frieze uniformly grinded spray primered, spray painted with P.U Paints. (iii ) 3 No. cast iron/frp base panel railing with frame Floral and Ornate decorative design cast iron/frp side railing panel as per design having height of 730mm and length as per size of Gazebo. Each panel top and bottom mounted with mild steel tubular pipe frame of size 50 x 25 mm. The bottom mild steel pipe having 2 nos. of hold fasts in m.s pipe of size 40 x 40mm and length 250mm welded at the base to hold the panel in the ground. Every panel length is as per the gap between the two pillars. The complete railing panel grinded for neat surface

Multi Play Station consisting of four nos. of platforms with designer canopies having appearance of 3.0 mtr. height made of 3 mm FRP each of minimum size 1.20 mtr. X 1.20 mtr. by four numbers of minimum 80 mm IDGI pipe `B-Class` made of 14 SWG CRC sheet with FRP non skid lamination/2.5 mm thick special perforated MS sheet duly supported underneath by angles of size 40 X 40 X 4 mm. Platform should be supported by railing made of 25 mm and 20 mm IDGI pipe `B-Class` horizontal as well as vertical members respectively. The vertical member should be at least 0.75 mtr. high and spaced at distance of 45 cm. There should be one spiral slide, one wave slide and one double wave slide connected with platform at height 1.5 mtr, 1.2 mtr., 1.2 mtr. and 1.2 mtr. respectively