Ayodhya Development Authority Tender

... More
The Ayodhya Development Authority has issued a formal invitation for competitive bids for Interlocking Road Construction Work From Aasra Awas Colony To Aligarh Old Police Chowki Via 14 Kosi Parikrama Marg. in Ayodhya, Uttar Pradesh, with an estimated contract value of Rs. 1,56,34,923. The bid opening date for this tender is 19-11-2026 and the last date for bid submission is 28-11-2026. Interested bidders for Ayodhya Development Authority tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Ayodhya Development Authority Tender - UP Tender

Opening Date19 Nov 2026
Closing Date28 Nov 2026
Tender Amount₹ 1,56,34,923 
Notes
Download

Costs

Description

Interlocking Road Construction Work From Aasra Awas Colony To Aligarh Old Police Chowki Via 14 Kosi Parikrama Marg.

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.-DSR 2023 item no. 15.6

10

194

1940

... More
Earth work in filling in cartage upto 8 Km.-SR

427

316

135316.3

... More
Construction of granular sub-base by providing close graded Material, spreading in uniform layers with motor grader on prepared surface,mixing by mix in place method with front end loder at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.-SR

695

3932

2732830.35

... More
Providing and laying Cement concrete 1:4:8 (1cement :4 coarse sand :8 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.-SOR/Sch. PWD-281/Sl. No. 6(1)

417

6350

2647950

... More
Providing and laying factory made cobble shape paver block 80 mm thick, compressive strength >= M 30 steel mould compressive technology.- SR

5451

1185

6463795.8

... More
Supply of 25 mm dia cpvc pipe including all complete.-SOR/Sch. PWD- Chap. 21/ Sl. No. 87

135

112

15120

... More
Road Signages & Road Saftey

1

50000

50000

... More
Electrical Work

-

-

-

... More
Supply ,fixing, testing & commissioning of 7 mtr decorative pole with single arm bracket .Pole made from continuously tapered circular hot rolled steel pipe conferming to E250 grade as per IS 2062 :2011 standards.Total hight of pole with bracke shall be 7000mm nominal above the ground floor.Base plate is made of 10mm/12mm MS sheet base so designed that the foundation bolt are not visible .The pole dimensions are a bottam diameter 166mm ,topndiameter of 76 mm and thickness of 3mm .the bracket stem is constructed from circular pipe 76.1 mm diameterand 2.6mm thickness ,crowned with a mild steel (MS) cone 700 mm hight of at the top.The pole are painted with multiple coat of weather resistant polyurethane paint the service window at the lower part of the pole contains connector,cutouts & MCB etc.The single arm bracket is made out of steel section of vairious diameters the bracket can be made as per top of pole diameter.The RCC foundation of pole also included with 450mm long x16mm dia foundation bolt .The bidder should be Submit the sample of pole for approval of paint and designe. The waranty of each part of equipment should be minimum 5years. Make-as per approved UP PWD .MR

54

41850

2259900

... More
Supply, fixing ,testing & commissioning of IP 65 protection 120 watt post top latern as per approved and suitable for 7 mter decorative pole, the system lumens should be min 9000 lumens.the luminaire efficiency should be 100 lumens/w system wattage should not be more than 120 watt. The colour of lamp should be as per approval of Engineer/Incharge Make as per approved UP PWD. MR

54

8550

461700

... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed 3core 6 sqmm XLPE cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitablesize or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc.The cable will be connect to existing Electrical Panel.Make-UP PWD Approved.- SOR-22/501/E

1620

275

445500

... More
Supply and laying below 750mm of 63mm dia DWC HDPE pipe including digging and backfilling and repairing of any cutting of road cutting as directed by Engineer Incharge.Make as per UP PWD approved .-DSR-22 14.16.1(With factor 0.755*0.97) = 0.732

1620

189

307184.4

... More
Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified-SOR-2018/726/C

8

9580

76640

... More
Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all Respect. Including 16 A SP MCB .All equipments shall be UP.PWD approved.-SOR-22/807

1

19050

19050

... More
INCOMER 1 No. 32 A DP MCB,10 kA breaking capacity. SOR- 22/1009

1

730

730

... More
OUTGOINGS 16A DP MCB SOR-22/1002

3

250

750



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.