Civil And Construction Tenders in Nagaland

Repairs To Brick Wall Wall Panneling, Ceiling And Including Connected Building Works At Sector B At Zakhama Military Station

P/l Bc 30 Mm Incl Correction Wks With Bm 50 Mm And Thermoplastic Paint For Edge Marking Bet Km 7.00 To Km 40.06 (waste Shredded Plastic To Be Used For 3.63 Km Length) On Road Mon-lungwa Under 100 Rcc/15 Brtf Sector (p) Sewak In Nagaland State

Repairs Replacement To Sanitary Fittings And Fixture, Plumbing Including Water Supply And Other Maint Works At Chakabama Military Station Under Age(i) Zakhama

Construction Of Toilet Block For Community Hall At Upper Chandmari Village ( 01 Each For Boys And Girls) Kohima District (nagaland)

Supply And Construction Of Water Tank Pcc For Wp Shed In 2 Mtn Div Aor

Repair Replacement Of Galvalume Sheet Roofing,scantling,ceiling And Allied Works At Zone A At Chakabama Military Station Under Age(i) Zakhama

CATEGORY: HDPE laminated Sand Bag of size 75x40 cm, Sand colour and each bag having weight not less than 60 gms , SHS 6 mm thick size 120 x 120mm x 2.4m long for column with holes made on the top of coln as per design for fixing G1 Beam. Make, TATA oblique Sail oblique Jindal , ISMB 150 RSJ 150 x 75 mm G1 1.85 mtr long for beam conforming to relevant IS, Make, TATA oblique Sail oblique Jindal , ISMB 150 RSJ 150 x 75 mm G1 60 Cm mtr long for beam conforming to relevant IS, Make, TATA oblique Sail oblique Jindal , ISMB 125 RSJ 125 x 70mm G2 3.0m long for beam 2 conforming to relevant IS, Make, TATA oblique Sail oblique Jindal , SHS 6 mm thick size 70x70mm x 1.85m long for G3 Bottom bracing with conforming to relevant IS Make TATA oblique Sail oblique Jindal , 6mm thick MS plate 75x150mm welded with G1 beam connected with nut and bolts. , 6mm thick MS plate 100mm x 100mm with a gap of 75mm welded with coln bottom to connect 70mm x70mm SHS with nut and bolts, 04 each. , 12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column. , 6mm thick MS base plate of size 150 x150 mm for SHS column including welding, knotching, cutting and nuts,bolts, washer etc. , Steel Roofing Trough SRT of size 1630 mm x 613 mm x 180 mm made out of 2 mm thick hot rolled carbon steel sheet conforming to relevant IS complete. , MS hexagonal nuts. Bolts and washers 12 mm dia 40 mm long. , LDPE sheet 3 m wide weighing 1 Kg oblique RM black in colour and shall contain not less than 2 percenttage of carbon black, Sample to be approved before supply. , Red Oxide primer conforming to relevant IS. , Synthetic Enamel Paint Colour Green Ist quality conforming to relevant IS, Make, Johnson and Nicholson India Ltd, Nerolac Paint and Asian Paint. , Thinner, Sample to be approved before supply. , Dry distemper, Sample to be approved before supply. , Chalk whiting, Sample to be approved before supply. , Paint Brush 4 inch Make, Amar oblique Lucky Sample to be approved before supply. , Pre fabricated steel door of size 0.90m x 1.80m made out of 2mm thick MS black carbon sheet welded to 30x30x6mm ISA door shutter frame fitted to 50x50x6mm ISA door frame. , Supply of Swivel Bullet proof glass glass 750mm x 500mm size 72 mm thick with fabricated iron frame including necessary locking arrangement in the frame to fix the glass in the loop hole. , Silicone Gel sealent of 01 pack of 400 gms including aplicator gun. , Ply wood 10 mm thick as per requirement for flat surface. , Foundation bolts of 16 mm dia and 250 m long with nut, bolts washer etc.

Constr Of 30 M Single Span Major Pmt Br With Psc Box Girder With Open Fdn Including Proof Checking Of Design And Drawings At Km 51.700 On Kohima Pedi Peren Road Under 89 Rcc/15 Brtf/project Sewak In Nagaland State

CATEGORY: Coarse Aggregate (V2) Conforming to IS 383 (Q3) , Fine Aggregate (V2) Conforming to IS 383 (Q3)

CATEGORY: Coarse Aggregate (V2) Conforming to IS 383 (Q3) , Fine Aggregate (V2) Conforming to IS 383 (Q3)