Military Engineer Services Tender

Supply and Fix Star delta Starter fully automatic suitable for 415 V AC for 30 HP Motor, Relay Max Range 60 Amp,Contactor Max Range 50 Amp, including connection and testing complete all as specified and directed

Supply and Fix Star delta Starter fully automatic suitable for 415 V AC for 100 HP Motor, Relay Max Range 150 Amp,Contactor Max Range 125 Amp, including connection and testing complete all as specified and directed

Supply & fixing unarmoured (Heavy duty) PVC insulated electric copper conductor cable for working voltage upto and including 1100 volts of size, 1100 Volts grade cable 3 core 25 Sqmm complete all as specified and directed.

Supply & fixing unarmoured (Heavy duty) PVC insulated electric copper conductor cable for working voltage upto and including 1100 volts of size, 1100 Volts grade cable 3 core 35 Sqmm complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of of size 50 sq mm 3½ core complete all as specified and directed

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of of size 35 sq mm 3½ core complete all as specified and directed

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of of size 16 sq mm 4 core complete all as specified and directed

S & F Steel water tubing medium grade galvanised with all GI fittings (such as bend,elbows,tees, connections, short pieces, back, nuts, unions, caps & plugs etc) laid in trenches or fixed on walls or on open surfaces complete all as specified and directed of the following sizes:- (a) 50 mm bore

All as per item No 11 above but 80 mm bore

All as per item No 11 above but 100 mm bore

S & F gun metal, globe or gate valves ISI marked class-I, with iron wheel head, screwed both ends, for iron pipe complete all as specified and directed of the size 50 mm bore (2")

S & F ,testing and commencing of sluice valve of cast iron body flanged and drilled as per ISI 14846 (ISI Marked) specifications PN-1.6 with stainless nuts,bolts, washers & fibre/rubber gasket steel spindle all as specified and directed of the size 80 mm bore (3")

S & F ,testing and commencing of sluice valve of cast iron body flanged and drilled as per ISI 14846 (ISI Marked) specifications PN-1.6 with stainless nuts,bolts, washers & fibre/rubber gasket steel spindle all as specified and directed of the size 100 mm bore (4")

S & F NRV and supplying installion, commencing, connecting and testing of cast steel Non Return Valve, class 300 ASA, flanged and drilled both ends with gun metal seat and making bypass arrangement flanged type complete with & including flanges,fibre sheet gasket, nut-bolts & washers complete all as specified and directed of the size 100 mm bore (4").

S & F NRV and supplying installion, commencing, connecting and testing of cast steel Non Return Valve, class 300 ASA, flanged and drilled both ends with gun metal seat and making bypass arrangement flanged type complete with & including flanges,fibre sheet gasket, nut-bolts & washers complete all as specified and directed of the size 80 mm bore (3").

Supply, install, test and commission feeder pillar box out door type complete with weather protected top canopy front and rear operated twin leaf doors and cable allay ,with locking arrangement made out of 3 mm thick sheet steel duly treated with powder coated finish, copper bus bars in enclosed chamber complete with MC100 pedastal for grounting, PCC pedastal, rubber linings for doors with including foundation complete with the following :- (i) Copper bus bars of capacity 150 Amps for three phases and 100 Amps for neutral. (ii) MCCB 4 P 125 A with suitable release range. Braking capacity 25 KA (for incoming) - 1 No. (iii) MCCB 4Pole 100 A 25 KA - 02 Nos(Outgoing) (iv) MCB FP 63A - 01Nos(Outgoing) (v) MCB SPN 40A - 02Nos(Outgoing) (vi) Voltmeter Digital 0-500 Volts -01 No with selector switch (vii) Ammeter Digital 01 No with CTs and selector switch (viii) Timer Switch Alpharex D22 (daily with IP 53 box) (ix) Phase indication lamp(RYB) - 01 set

Supply, installation, testing & commissioning of diesel engine silent generator set with acoustic enclosure confirming to latest CPCB norms, water cooled capacity 125 KVA ( generator out put should be 125 KVA/100 KW) 50 Hz AC supply, engine as per IS : 10001/ 10002 and alternator as IS : 13364 complete including engine alternator mounted on common base frame and canopy fabricated from steel channel of suitable size, engine and alternator shall be anti vibration mounting pads,sound proof canopy as per latest CPCB norms and foundation as per manufactures instruction / design complete all as specified directed with and including the following provision :- (a) ALTERNATOR :- Alternator of capacity 125 KVA/ 100 KW at 0.80 power factor after considering derating factor AC 3 phase , 415 volts, 50 Hz, 1500 RPM brushless type self excited, self regulated screen protected type and AVR system. (b) DIESEL ENGINE:- Diesel engine air cooled suitable for alternator of 125 KVA capacity considering all points for derating factor taking into account the altitude, humidity of maximum temperature of Ranikhet with the following provision :- (i) Radiator and sound proof canopy as per latest CPCB norms and foundation etc. of capacity 125 KVA (ii) Fly wheel (iii) Air cleaner (iv) water pump with thermostat (v) Electric starting system with the help of batteries as per manufacture's specification with key ignition and push button (vi) Temperature meter and oil pressure gauge

(vii) Fuel tank of made of mild steel sheet of required capacity as per standard with inlet and out let connection, filling cap, drain valve air vent with calibrated scale on outdoor surface floor mounted with suitable angle iron support (viii) Fuel/ oil filter (ix) Battery charger as per manufacturer's recommendation (x) Battery maintenance free with connecting lead. Make Exide / Amaron/Luminous (xi) Foundation as per manufacturer's instruction/ drawing (xii) Heating system to start engine during winter season (xiii) Engine protection device against short circuit overload low lubricanting oil high pressure water temperature and over speeding of engine (xiv) Anti vibration mounting pad - set of 6 Nos (xv) Exhaust system up to required height and length (xvi) Engine warranty and test certificate (xvii) RPM meter and hour meter (xviii) Including Gen set control unit complete The DG Set must include the following features • Compact size with Manual/ Automatic starting system. feature. • Sound Proof, Weather Proof enclosure. • Low vibration,with electronic fuel injection system • Class G3 Governing in its range, which gives better accuracy in decreasing the speed drop in transient and lowering th recovery time of the speed. • Confirms to latest Govt. CPCBIV+ emission & • The Enclosure should be of modular construction with the provision to assemble and dismantle easily. • The sheet metal components should be 9 tanks pre treated and should be polyester based powder coated (inside as well as outside) for long life. • All Nuts-bolts, hardware should be of Stainless Steel for longer life. • Battery must be provided in a tray inside the enclosure. • Doors must be gasketed with high quality EPDN gaskets to avoid leakage of sound • Optimised EATS (Exhaust After Treatment System) should be provided to control emission & exhaust noise.with sound attenuators to control sound at air entry & exit points inside the enclosure• Adequate ventilation should be provided to meet air requirement for combustion & heat removal

M&L for earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick burried directly in ground verticaly (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised strip 32x6mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 40mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 40mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost.

Supply and fix ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 200 Amps.

Excavation in trenches in hard/dense soil not exc 1.5 mtrs wide and not exc 1.5 m in depth for laying cables and getting out incl jointing bottom surface to the reqd level/slope etc complete all as specified and directed.

Removing excavated material to a distance not exc 15 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point.

M&L for laying of fine river sand, free from sharp material for cable cushioning in trenches all as specified and directed.

M&L for brick protection covers laid over cables of sub class'B' bricks old size (230X115X75)mm all as specified and directed.

M&L for GI pipe light grade with all fittings fixed to pole and laid to floor/ground for mechanical protection of cable of the following sizes :- (a) 80mm bore

All as per item No 29 above but 50mm bore

S&F synthetic insulating mat near electric installations of size 2m x lmX 3mm as specified and directed.