Military Engineer Services Tender

Supplying, installation, testing and commissioning of silent diesel engine driven generating set 415volts, 3 phase 4 wire engine as per IS: 10001/10002 and alternator as per IS: 13364 complete with necessary foundation as per manufacturer recommendations,AVM pads, control panel with necessary meters and sound proof canopy of capacity up to 62.5 KVA complete all as specified and directed for the following specifications :- (A) DIESEL ENGINE. Water cooled, 4x cylinder (102 BHP) developing suitable BHP @ 1500RPM. Engine shall be cooled by rail mounted, engine driven radiator of adequate capacity, with blower fan, fan guard, fan belts etc. The diesel engine shall be vertical, to run continuously at 1500 RPM confirming to IS 10002, BS-5514, standard with an overload capacity of 10% for one hour in every 12 hrs of operation. Diesel engine shall comply with latest CPCB norms. The Diesel Engine shall be regulated with Electronic governor. Make of Engine-CUMMINS, KIRLOSKAR, GREAVES COTTON, ASHOK LEYLAND. (B) ALTERNATOR. Alternator 62.5 KVA, suitable to deliver rated output at 1500 RPM, 415V, 0.8 PF (LOG), 50HZ, 3 PH, in SPDP enclosure, self-excited & regulated electronic governor . The alternator shall conforms to IS-13364 & shall be suitable for tropical condition. Full load efficiency of the alternator offered should be above 90%, insulation and temperature rise also limited to class H. Enclosure shall conform to IP-23. Make of Alternator - KIRLOSKAR, STEMFORD, JYOTI, CROMPTON. (C) STANDARD CONTROL PANEL. Totally enclosed, steel construction control panel comprising of following :- (i) Main on /off MCCB 3 phase 4 pole 415 volt 50 Hz 125 Amp taring 25 KA-01 No. (ii) Phase indicating lamps set of three-01 No. (iii) Instrument fuses -01 Set . (iv) Digital display/indication of engine and alternator parameters as mentioned below shall be available :- (a) Lube oil pressure. (b) Battery voltage. (c) Engine RPM. (d) Fuel level in the tank. (e) Engine running hours indication. (f) AC current and voltage. (g) AC Frequency. (h) AC Power metering. (j) Suitable CTS for displaying the electrical parameters.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sq mm 3.5 Core make Havells Polycab, gloster gemscab, KEI,HPL, Dynamic grandlay.

Excavation in trenches in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for laying of pipes and for poles/stay and struts not exceeding 10 Sqm on plan and getting out, excavated earth, forming bottom surfaces to required level complete all as specified.