Military Engineer Services Tender

Lumpsum price worked out by the tenderer for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-III.

Lumpsum price worked out by the tenderer for INTERNAL ELECTRIFICATIONS as listed in Schedule ‘A’ Part-IV.

Lumpsum price worked out by the tenderer for ROADS / PATH / CULVERT / FOOTPATH as listed in Schedule ‘A’ Part-V.

Lumpsum price worked out by the tenderer for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part-VI.

Lumpsum price worked out by the tenderer for AREA DRAINAGE as listed in Schedule ‘A’ Part-VII.

Lumpsum price worked out by the tenderer for CHAIN LINK FENCING/GATE as listed in Schedule ‘A’ Part-VIII.

Lumpsum price worked out by the tenderer for EXTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part-IX.

Lumpsum price worked out by the tenderer for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-X.

Sch 'A' Sec-XI (Miscellaneous Items)Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

Supply and laying well burnt sub class ‘B’ bricks ( designated 75) locally available best quality, laid dry in trenches for protection of underground cable complete all as specified and directed

M& L for sand cushioning in trenches for protection of under ground cable provided in layers of sand as 8 cm before laying the cable and 15 cm deep after laying cable and punned down complete all as specified and directed. Note : Punned thickness shall be measured and paid.

Construction of Brick Masonry SOAK WELL OF SIZE 3.0M DIA & 4.50M DEPTH with all fittings and fixtures complete all as specified and shown on drawing No. CESZ/2020/TD/45 sheet 1/2 to 2/2

Supply and erect/construction of LLDPE modular Vertical /Horizontal Septic Tank for 10 users capacity, made out of polyethylene resins, designed to carry sewage and sludge water including inlet, outlet & vent shaft pipe, valve & all necessary civil works as required with all fittings, fixtures etc. complete all as specified and directed Notes:-(i) PCC and earthwork shall be deemed to included in quoted rates

Material & Labour for earthing with galvanised steel earth plate electrode of size 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts check nuts and washers of galvanised iron or steel using GI strip 25x4mm as earthing lead connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 32mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs etc mesh, charcoal and common salt in alternate layers complete as shown in electrical plate No. 3 of SSR Part-I all as specified and directed.

Material & Labour for earthing with galvanised steel earth plate electrode of size 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts check nuts and washers of galvanised iron or steel using GI strip 32x6mm as earthing lead connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 40mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs etc mesh, charcoal and common salt in alternate layers complete as shown in electrical plate No. 3 of SSR Part-I all as specified and directed.

Material & Labour for earthing with galvanised steel earth plate electrode of size 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts check nuts and washers of galvanised iron or steel using GI wire 4mm dia as earthing lead connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs etc mesh, charcoal and common salt in alternate layers complete as shown in electrical plate No. 3 of SSR Part-I all as specified and directed .

M & L for Concealed Point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including PVC conduit of adequate size with all fittings and accessories including mild steel terminal boxes with laminated sheet for mounting switches, socket, regulators etc complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for One light/fan/Bell point controlled by one,one way switch complete all as specified and directed

M & L for Concealed Point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including PVC conduit of adequate size with all fittings and accessories including mild steel terminal boxes with laminated sheet for mounting switches, socket, regulators etc complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for One socket outlet point 6 A on independent board complete all as specified and directed

M & L for Concealed Point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and PVC conduit of adequate size with all fittings and accessories including mild steel terminal boxes with laminated sheet for mounting switches, socket, regulators etc complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for One light point controlled by ,two way switch complete all as specified and directed

M & L for Concealed Point wiring with 2.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including PVC conduit of adequate size with all fittings and accessories including mild steel terminal boxes with laminated sheet for mounting switches & socket, including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for one 16 Amp socket outlet on independent board complete all as specified and directed

M & L for Sub main Wiring with two run of 4.0 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including PVC Conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 4.0 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly complete all as specified and directed. Note: Two single core cable and one No. earth wire and one run of conduit shall be measured together as one length

S & F LED 240 Volt , 50 Hz, 10W B22 Type lamp complete. all as specified and directed.

S&F white modular blanking plate 1 Module complete all as specified and directed.

Supply, install, test and commission LT Panel Board, TPN 415 Volts, 50 Hz outdoor canopy type CPRI approved factory made, front and rear operated door dust and vermin proof IP-54, fabricated out of CRCA sheet not less than 2 mm thick with 2 mm thick for internal compartment duly powder coated with necessary locking arrangement made out of 50x6 MS angle iron frame suitable for carrying of current 300 Amps with suitable connections copper bus bars of suitable rating and connections from main bus bar to out going MCCB's (intake point) will be carried out with TPN copper bus bar as per MCCB rating duly insulated and colour coded heat shrinkable sleeve and shall be rigidly mounted on suitable size of bridge insulator including necessary PCC foundation of minimum 0.200 m height positioned and fixed with suitable nut, bolts, washers etc to the MC pedestal all as specified and directed comprising of the following :- (a) MCCB 150 Amps 4 Pole 50 Hz 415 V with thermal magnectic release having rupturing capacity 25 KA - 1 Nos (Incommer) (b) MCCB 63 Amps 4 Pole 50 Hz 415 V with thermal magnectic release having rupturing capacity 25 KA - 2No (Outgoing). (c) Digital voltmeter 0-500 volt with selector switch-01 Nos (d) Digital amp meter 0-100 amp with set of current transformer of suitable rating and selector switch -01 No (e) Space for one additional MCCB 63 Amps TPN (f) Indicating lamp 240 volts LED type - set of three for phase indication, two nos each for start and stop indication of motors.

Boring under roads with mechanical arrangement with 50 mm dia GI tubing without disturbing the top surface of the road for passing the cable across the road complete all as specified and directed.

S&F loop in loop out fuse junction box of internal dimension 250x200x100mm made of FRP sheet with weather proof canopy and locking screw fitted with and including 6amps MCB-01 No, 50 Amps rated 4 way connectors for 3 phase and neutral incoming/outgoing, mounted in the box, fixing on street pole/rail poles including necessary aluminium clamp, suitable glands, lugs and GI nut and bolt complete all as specified and directed.

M&L for security light bracket made out of GI pipe of light grade 1.2RMx40mm dia and 0.3RMx32mm dia at one end for inserting of light fitting, properly shaped, bended & fixed on the pole through MS flat by nut, bolt & washer of suitable size including two coat of synthetic enameled paint, complete all as specified and directed.

S&F for making connection of 63mm dia with PP-R main by providing and fixing elbow 900 including fusion joint comple te all as specified and directed.

S&F for making connection of 32mm dia with PP-R main by providing and fixing elbow 900 including fusion joint comple te all as specified and directed.

Supply and Fix Brass chromium plated wall /WHB mixer 15 mm dia for mixing hot and cold water screwed down for iron pipe complete all as specified and directed.

Switch piano flush type, single pole, two way, 6 Amps, 240 V (ISI marked) complete all as specified.

M&L for 100 mm cement concretetype C-2, 1:3:6 (40mm graded aggregate) as in path/hardstanding finishing cement concrete surface even and rough to receive the topping layer without using extra cement complete all as specified and directed.

Material and labour for chequered cement concrete tiles 30cmX30cmX25mm thick with grey pigments cement and pigments, set jointed and pointed in neat cement slurry in floor laid over 15mm screed bed or bedding layer in Cement mortar 1:4 for laying floor complete all as specified and as directed.