Military Engineer Services Tender

Material and labour for Preparing old black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all dirt etc. and applying evenly a priming / tack coat with bituminous primer at 5 KG per 10 Sq.m of paving bitumen of VG-10 complete all as specified and as directed.

Material and labour for bituminous premix semi-dense asphaltic concrete 40mm consolidated thickness with 5.5% paving bitumen grade VG-30 as a binder content by weight of total mix and grading of aggregates & design criteria as specified in SSR Part-I clause No 20.B.2.5.4(d) & 20.B.2.11 and mix at hot mix plant, spread with mechanical paver rolled and consolidated to gradient and camber with vibratory power roller 8 to 12 tonne and all as specified in para 20.B.4 & sub para 20.B.4 of MES Schedule Part-I complete all as specified and as directed. Note: (i) For job mix formula design purpose binder shall be as described i.e. 5.5% for VG-30 grade bitumen. (ii) No price adjustment shall be applicable if the approved quantity of binder as per design mixed is more than 5.5%. (iii) During design stage if binder content used less than 5.5% necessary price adjustment on quoted rate shall be done as per actual binder content used. (iv) Design to be got approved from GE

Material & Labour for Road Marking Strips, Lines, Dashes, Arrows, Letters etc of 2.5 mm thick [Reflective Type] of approved colour conforming to BS 3262-1989 on roads, pavements and the like not exceeding 10cm wide with Hot Thermo Plast material by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe heater, driven by skilled operator on road surface complete as per MoRT & H specifications including cleaning the road surface of all dirt, scales, oil grease and foreign materials etc complete all as specified and as directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with and incl MS stud of suitable size as per manufactures instructions and including taking down off old cat eye complete all as specified and as directed.

Supply and fixing solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. and including taking down off old solar cat eye complete all as specified and as directed.

Supply and fixing in Repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removal of rubbish from the site complete all as specified and as directed.

Material & Labour for 100 mm thick, PCC 1:4:8, Type D-2, using 40 mm graded stone aggregate as in sub base complete all as specified and as directed.

Material & Labour for sand filling under floors/ paths including watering and consolidation complete all as specified and as directed.

Material and labour for machine pressed precast conctete interlocking paver block any shape and size with grey cement and No pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with proper jointing complete all as specified and directed.

Material & Labour for providing Precast Cement Concrete Kerb Stones, Dividers with or without chamfered angles and flat, splayed, rounded or mitred tops Type, B1, 1:2:4, using 20mm Graded Aggregate, including all mouldings, set in Cement Mortar 1:4 including necessary earthwork excavation complete all as specified and as directed.

Material and labour for preparation of new concrete surface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed.