Military Engineer Services Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Technical
Technical
Technical Capacity
... View More
The required prior work experience for the bidder is not explicitly stated in terms of a specific amount of time. However, for a contractor to be considered for upgradation, they should have worked at least for two years in the present tendering limit. In terms of similar works completed, a contractor must have completed works with a value of more than 1.25 times the requirement in which the upgradation is being considered. For example, for a contractor proposed to be upgraded to class 'A' having a tendering limit of 7.50 crore, the minimum value of works completed shall be: - Two works completed costing not less than 5.00 crore each (1.25 x 4.00) - Or one work costing not less than 7.50 crore (1.25 x 6.00) Additionally, the average annual turnover of the contractor should be more than 1.25 times the requirement in which the upgradation is being considered. In the given example, the average annual turnover should be 7.5 crore (1.25 x 6.00). The average marks secured in Performance Reports for the works completed in the last five years should not be less than 70%. If a report for any work is not available, it will be deemed to contain only 60% average marks. In case the number of MES enlisted contractors of eligible class as well as un-enlisted contractors is 7 or more, applications of only those one class below the eligible class bidders will be considered who have previously completed similar works satisfactorily and meet the criteria of up-gradation in respect of past experience of completed works and financial soundness.
Costs
EMD
₹ 6,85,000Document Cost
₹ 3,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_690591_2Tender No
89091/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Excavating post holes or similar holes, each not exc. 0.5 cum, getting out in hard/ dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25cm, watering, and removing surplus soil complete all as specified and as directed.
136
-
-
... More
Removing excavated surplus soil to a dist not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.
333.73
-
-
... More
M&L for hard core of guage not exc. 63mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface completed all as specified and as directed.
307.39
-
-
... More
M&L for Plain Cement Concrete 1:4:8 Type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.
90.1
-
-
... More
M&L for Plain Cement Concrete 1:2:4 Type B1 (using 20mm graded granite stone aggregate) cast in situ in lintels up to 1.5m span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded complete all as specified and as directed.
19.76
-
-
... More
M&L for Plain Cement Concrete 1:2:4 Type B1 (using 20mm graded stone aggregate) in foundation filling, mass concrete and similar works and for MS pipe fixing complete all as specified and as directed.
28.68
-
-
... More
M&L for Plain Cement Concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in padding and benching & filletting with IWPC (IWPC measured and paid seperately) complete all as specified and as directed.
11.4
-
-
... More
M&L for Plain Cement Concrete 1:2:4 Type B1 (using 20mm graded stone aggregate) as in benching including necessary form work, etc., complete all as specified and as directed.
3
-
-
... More
M&L for precast RCC 1:2:4 type B1 (using 20mm graded aggregate) as in cover slab for manholes, etc., set in cement mortor 1:4 including use and waste of necessary form work complete all as specefied and as directed.
Note : Reinforcement shall be measured and paid seprately.
5.2
-
-
... More
M&L for Reinforced Cement Concrete (design mix) Grade M25 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings balconies canopies, desk slabs and in shelves and the like complete all as specified and as directed.
40.96
-
-
... More
M&L for Reinforced Cement Concrete (design mix) Grade M25 (20mm graded aggregate) in lintel bands, roof beams and cantilevers, etc., complete all as specefied and as directed.
36.7
-
-
... More
Supply only integral water proofing compound.
1819.77
-
-
... More
M&L for brick work with sub-class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.
536.2
-
-
... More
M&L for brickwork with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1: 4 complete all as specified and as directed.
511.17
-
-
... More
M&L for brick work with fly ash bricks, straight or curved on plan to any radius, built in cement mortar 1:4 using old size bricks complete all as specified and as directed.
56
-
-
... More
Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 for concealed water tubing, etc., & making good, cutting not exc. 10cm grith complete all as specified and as directed.
561.7
-
-
... More
M&L for Random Rubble masonry Secunderabad type built in cement mortar 1:6 uncoursed, well bonded, bedded and solidly hearted complete all as specified and as directed.
210.1
-
-
... More
M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
257.43
-
-
... More
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc. 200mm thick (Horizontal or sloping), etc., for rough finished surfaces of flat concrete complete all as specified and as directed.
354.36
-
-
... More
Use and waste of form work to sides and soffits of floor or roof beams, lintles, cantlevers, shelves incl supports, etc., for rough finished surface of concrete complete all as specified and as directed.
472.28
-
-
... More
Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n.exc. 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n.exc. 20cm wide for rough finished surfaces of concrete, etc., complete all as specified and as directed.
429.1
-
-
... More
M&L for 2nd Class hardwood plain fillets, square or triangular in section, clean swan, secured with nails or brads, croos sectional area exc. 13Sqcm but not exc. 25sqcm complete all as specified and as directed.
1968.7
-
-
... More
Drilling holes round, drill or cut in second class hardwood diameter or side not exc. 15mm dia and complete all as specified and as directed.
10.2
-
-
... More
S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
10.91
-
-
... More
S&F 35mm thick 2nd class hard wood gauzed and skeleton shutters for doors open rebated and prepared to receive glass, gauge, etc., divided into square with plain chamfered or rounded mitered and rebated sash bars, any number, edges of framing, plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., size of members of shutters all as specified in SSR Part-I Section 8 clause 8.20(a) complete all as specified and as directed.
442.94
-
-
... More
S&F 35mm thick FACTORY MADE plain, framed, panelled shutters ( two panels), with lock rail and panels of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated supplied and fitted to chowkats complete all as specified and as directed.
621.62
-
-
... More
Taking down chowkats or frames not exc. 1.5 sqm each (Without taking off shutters from the frames) and removing complete all as specified and as directed.
292
-
-
... More
Taking down and removing to or from stores chowkats or frames exc. 1.5 sqm but not exc. 4 sqm each (without taking off shutters from the frame) and removing complete all as specified and as directed.
494
-
-
... More
S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening, etc., complete all as specified and as directed.
582.8
-
-
... More
S&F factory made Solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.
172.76
-
-
... More
S&F 150mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.
745
-
-
... More
S&F 125mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.
136
-
-
... More
S&F for Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 300mm complete all as specified and as directed.
547
-
-
... More
S&F 100mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and as directed.
2031
-
-
... More
S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 and fixed to PVC doors complete all as specified and as directed.
372
-
-
... More
S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flaps (when open) in 30mm, etc., complete all as specified and directed.
1048.8
-
-
... More
S&F 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
230
-
-
... More
S&F extruded aluminium alloy handles, fabricated type, anodised, size of handle in 75mm, etc., complete all as specified and as directed.
264
-
-
... More
S&F 150mm length of extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
1354
-
-
... More
S&F 125mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
248
-
-
... More
S&F Brass 2-levers locks for cupboard, grade-I of size 50mm complete all as specified and as directed.
236
-
-
... More
S&F fanlight magnetic catch with 14mm catch cast brass and fixed to cupboard shutters all as specified and as directed.
1210
-
-
... More
S&F 40mm dia cupboard knobs fixed with nut, screw and washer of mild steel, bright finished and brass polished complete all as specified and as directed.
946
-
-
... More
S&F 20mm dia Harrison rails, anodised alluminium alloy with fixing brackets, stops, rollers, etc., complete all as specified and as directed.
722.4
-
-
... More
S&F in repair, 20mm dia Harrison rails, anodised alluminium alloy with fixing brackets, stops, rollers, etc., complete all as specified and as directed.
97.15
-
-
... More
S&F Brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges of Brass chromium plated complete all as specified and as directed.
172
-
-
... More
S&F 150mm long floor door stopper of Aluminium alloy body and tongue, ISI marked, anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed.
677
-
-
... More
S&F Stainless Steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with wooden beeds complete all as specified and as directed.
418.59
-
-
... More
S&F Mild Steel angles, bars, flats, etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe 410-O 0r Fe 310-O complete all as specified and as directed.
336.32
-
-
... More
S&F Mild Steel screw bolts of 5 to 10mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc. 10cm but n.exc. 15cm complete all as specified and as directed.
45
-
-
... More
S&F Mild Steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc., as required, thickness of sheet 1.60mm, etc., complete all as specified and as directed.
78.13
-
-
... More
M&L for Mild Steel TMT bars 10mm dia and over, cut to length bent to shap required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securing with clips complete all as specified and as directed.
9199.84
-
-
... More
-Ditto- all as per Item No. 54 above but 5mm dia and over upto and including 10mm dia in spacers, stirrups and binders.
3600.04
-
-
... More
M&L for Mild Steel framed structure in roof trusses (framed), trussed, purlins, crane gantries and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats of Grade Fe 410 -W (Gde- E- 250) quality - A, etc., complete all as specified and as directed.
16355
-
-
... More
S&F Mild Steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, Fe 410-W (Gde-E-250) quality - A, etc., complete all as specified and as directed.
1796.25
-
-
... More
M&L for Steel work in tubular trusses & vertical post including special shaped washer, etc., using ERW or induction butt welded tubes conforming to IS : 1161-1979 grade st-240 complete all as specified and as directed.
7064
-
-
... More
M&L for double shutter pre coated box type steel window with side hung shutters (glazed and gauzed) including hinges with steel handle and peg stay complete with or with out glazing bars dovtailed or welded complete all as specified and as directed.
406.51
-
-
... More
M&L for steel window with side hung shutters including projecting type hinges with steel handle and peg stay complete with out glazing bars dovtailed or welded complete all as specified and directed.
9.38
-
-
... More
S&F steel ventilators with top hung shutter including hings, steel peg stay complete all as specified and as directed.
121.31
-
-
... More
M&L for pre-painted Galvalume Aluminium Zinc coating GI based corrugated sheet 0.50mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.
4757
-
-
... More
M&L pre-painted Galvalume Aluminum Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.
673.15
-
-
... More
Taking down existing felt, plaster and preparing the surface of roof by cleaning of foreign materials down with water complete all as specified and directed.
450
-
-
... More
M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid over primed surface including bituminous primer conforming to IS:3384 applied @ 0.3 ltrs/sqm by forced application and applying one coat bitumen grade 85/25 @ 1.2 kg/sqm over finished with one coat of Aluminium paint @ 100 ml/sqm, 10cm overlap fused uniformly by LPG torch flame complete all as specified and as directed. Note :
(a) Rate included taking down and refixing of earth strips or any other items in the same position.
(b) WPC & padding concrete shall be measured and paid separately.
450
-
-
... More
S&F in repair, 18/19mm thick prelaminated particle board interior grades prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with nails to timber frame work complete all as specified and as directed.
572.1
-
-
... More
Extra over rates of block board or veneered particle board of (18/19mm) for external teak wood lipping 6mm thick fixed with nails, etc., complete all as specified and as directed.
2833.2
-
-
... More
Providing and fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595x595mm, not less than 12mm thick, semi perforated of approved texture, design and patterns having moisture contents less than 2% humidity resistance of 99% NRCO .50 to .75 as per IS:8225-1987, noncombustible as per BS:476 (Part 4) - 1970 and light reflectance of 85% (min) to be laid in true horizontal level suspended on interlocking metal T Grid of hot dipped galvanized iron section of 0.33mm thick (galvanised @120 gms per sqm incl both sides) comprising of main T runners of size 15x 32mm of length 3000mm, cross- of size 15x32mm of length 600mm to form grid module of size 600x 600mm, suspened from ceiling using galvaized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fastener 6mm dia fully threaded hanger rod upto 1000mm length and L-swhape level adjuster of size 85x25x2mm galvanised iron permieter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm ceneter to centre and 50mm long dry wall wood screws, etc., complete all as specified.
2621
-
-
... More
Note : The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge.
-
-
-
... More
M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.
500.87
-
-
... More
M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded granite stone aggregate) as in plinth protection finishd even and smooth with out using extra cement complete all as specified and as directed.
686.52
-
-
... More
M&L 75mm thick PCC 1:4:8, Type D2 (using 40mm graded stone aggregate) as in sub base of floors laid in alternative bays including necessary form work complete all as specified and as directed.
4190
-
-
... More
M&L for 40mm thick PCC 1:2:4, type B-1 (using 20mm graded aggregate) surface finished even and smooth without using extra cement complete all as specified and as directed.
1410.87
-
-
... More
M&L for 25mm thick PCC 1:2:4, type B0 (using 12.5mm graded stone aggregate) as in sub-base and finished surface even and smooth without using extra cement, complete all as specified and as directed.
3792
-
-
... More
M&L for roughening surfaces of old concrete floor or concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc., and brushing neat cement slurry with 3 kg of cement per square metre complete all as specified and as directed.
450
-
-
... More
M&L for glazed ceramic tiles in vetical surfaces, size of tile 300mmx200mmx7mm thick laid over and including 10mm thick back coat in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, complete all as specified and as directed.
2795.92
-
-
... More
M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exc. 0.11 sqm, as in floors, etc., laid over and including 15mm thick cement screed bed or bedding layer in CM 1:6, tiles jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, compelte all as specified and as directed.
742.25
-
-
... More
M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.11sqm but not exc. 0.18sqm, as in floors, etc., laid over and including 15mm thick cement screed bed or bedding layer in CM 1:6, tiles jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles compelte all as specified and as directed.
2069
-
-
... More
M&L Vitrified Ceramic tiles 10mm thick (Square or rectangular) polished, area of each tile not exc. 0.36 sqm as in skirting/ dados, etc., laid over and including 10mm thick back coat in CM 1:4 and jointed in neat slurry and pointed in white or coloured cement to match using light shade coloured tiles complete all as specified and directed.
64.73
-
-
... More
M&L vitrified ceramic tiles, light shade, 10mm thick (Square or rectangular) polished, area of each tile not exc. 0.36 sqm as in floors, etc., and laid over and including cement screed bed or bedding layout in CM 1:6, 15mm thick and jointed in neat slurry and pointed in white or coloured cement to match using light shade coloured tiles complete, all as specified and as directed.
980.75
-
-
... More
M&L chequered cement concrete tiles 25cm x 25cm x 25mm thick with grey cement and pigment, machine pressed, set jointed and pointed in neat cement slurry in floors including 15mm thick screed bedding layer in CM 1:6 complete all as specified and as directed.
1363.25
-
-
... More
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and directed.
1443.9
-
-
... More
Note for Item No. 82 to 84 : Cement Plaster work shall be carried out using river sand only
-
-
-
... More
M&L for rendering 15mm thick in cement mortor 1:4 on concrete or brick wall surfaces, finished even and smooth without using extra cement, mixed with WPC @ 3% by weight of cement complete all as specified and as directed.
Note : IWPC measured and paid separately.
4914.95
-
-
... More
M&L for rendering 5mm thick in cement mortor 1:3 as in ceilings, concrete surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.
447.1
-
-
... More
M&L for rendering 10mm thick in cement mortor 1:6 on brick wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
9600.45
-
-
... More
M&L screed bed or bedding layer 10mm thick in cement mortor 1:4 for laying floor finishes finished even and smooth without using extra cement with IWPC as in roof slabs complete all as specified and as directed. Note : IWPC measured and paid separately.
450
-
-
... More
Taking down cement plaster on wall of any description incl racking out joints for key, scrubbing with water, etc., complete all as specified and as directed.
12172.98
-
-
... More
M&L for two coats of oil bound distemper over a coat of alkali resistant primer on newly plastered surfaces of walls including 3mm thick wall care putty on wall and preperation of surface complete all as specified and as directed.
8669.04
-
-
... More
M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant primer on old surface of walls including 3mm thick wall care putty complete all as specified and as directed.
3662.54
-
-
... More
M&L for preparing new plastered surfaces of walls and applying two coats of cement based paint complete all as specified and as directed.
4914.95
-
-
... More
M&L for complete removal of existing treatment and applying two coats of cement base paint on walls surfaces complete all as specified and as directed.
1608.77
-
-
... More
M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete and all as specified and as directed.
931.41
-
-
... More
M&L for complete removal of existing treatment and applying two coats oil bound distemper over a coat of alkali resistant primer on old surface of ceiling complete all as specified and as directed.
235
-
-
... More
M&L for preparation of newly plastered surface and applying two coats of oil bound distemper over a coat of alkali resistant primer on new surface of ceiling complete all as specified and as directed.
200
-
-
... More
M&L for preparation of new ceiling surfaces and applying three coats of white wash complete all as specified and as directed.
247.1
-
-
... More
S&F 4mm thick Sheet glass, ordinary quality, glazing with oil putty or wooden beading in squares not exc. 0.5 sqm in each pane complete all as specified and as directed.
310.63
-
-
... More
S&F 4mm thick figured glass, pin head type, glazing with wooden beads or oil putty in square not exc. 0.50 sqm in each pane complete all as specified and as directed.
53.92
-
-
... More
M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of Synthetic enamel paint (ordinary tint) over a coat of Pink primer complete all as specified and as directed.
2043.3
-
-
... More
M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
1406.1
-
-
... More
M&L for preparation of old painted steel surfaces of any description, over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.
140.4
-
-
... More
M&L for 20mm bore GI Tubing medium grade with all fittings fixed to wall/ ceiling or in floor complete as specified and as directed.
848.31
-
-
... More
Taking down 15mm bore steel tubing and connections in any position complete all as specified and as directed.
361.48
-
-
... More
Taking down 20mm bore steel tubing and connections in any position complete all as specified and directed.
563.32
-
-
... More
S&F 16mm CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including provision of special fittings (Unions, Elbow, Tee, Male threaded brass adaptor, Female threaded brass adaptor, Tank adaptor, etc.,) complete all as specified and as directed.
561.7
-
-
... More
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 ltrs capacity hoisted and fixed in position all as specified including dismantling old tank complete all as specified and as directed.
56
-
-
... More
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 ltrs capacity hoisted and fixed in position all as specified including dismantling old tank complete all as specified and as directed.
4
-
-
... More
S&F in repair, 15mm bore bib taps, Chromium plated cast Copper alloy but fancy type, screwed down, screwed for iron pipe or for Brass ferrule complete all as specified and as directed.
404
-
-
... More
S&F in repair, two way bib tap/ cock 15mm bore, Chromium plated, fancy type complete all as specified and directed.
8
-
-
... More
S&F two way bib tap/ cock 15mm bore, Chromium plated, fancy type complete all as specified and directed.
52
-
-
... More
S&F in repair, Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.
8
-
-
... More
S&F in repair, 15mm dia fancy type stop valves/ angle cock Chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
360
-
-
... More
S&F in repair, 20mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
112
-
-
... More
S&F in repair, 20mm dia Brass ball valve, high pressure with polythene float and fly-nut complete, screwed for Iron pipe or Brass ferrule fixed complete all as specified and as directed.
60
-
-
... More
S&F in repair, PVC connection 15mm dia, 45cm long with Brass ferrules on both ends fixed complete all as specified and as directed.
196
-
-
... More
S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down existing pipe complete all as specified and as directed.
593.5
-
-
... More
S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down complete all as specified and as directed.
288.95
-
-
... More
S&F in repair, PVC (SWR) bends any radius 110mm bore complete all specified and as directed.
60
-
-
... More
S&F PVC (SWR) bends any radious 75mm dia complete all specified and as directed.
76
-
-
... More
S&F in repair, PVC (SWR) bends with access door any radius 110mm bore complete all specified and as directed.
60
-
-
... More
S&F PVC (SWR) bends with access door any radious 75mm dia complete all specified and as directed.
64
-
-
... More
S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 110mm complete all specified and as directed.
64
-
-
... More
S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 75mm complete all specified and as directed.
8
-
-
... More
S&F PVC (SWR) junction single (single T) equal or unequal of bore 75mm complete all specified and as directed.
16
-
-
... More
S&F PVC (SWR) vent cowl 110mm bore complete all specified and as directed.
64
-
-
... More
S&F in repair, PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all specified and as directed.
240
-
-
... More
S&F for PVC waste pipe for Sink/WHB with fitting, etc., 32/38 mm dia complete all specified and as directed.
128
-
-
... More
M&L for concrete bed to drain pipes 150mm dia bore using plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid and tested in complete all as specified and as directed.
592.08
-
-
... More
M&L for salt glazed stoneware drain pipes 150mm dia bore (Grade 'A' pipe) laid in trenches and jointed as specified incl demolition and breaking of same bore drain pipe complete all as specified and as directed.
620
-
-
... More
S&F PTMT Shelf of weight not less than 300 gms with soap dish (tray) fixed with and including Chromium plated brass screws and wooden/ plastic cleats, etc., complete all as specified and as directed.
172
-
-
... More
S&F Stainless Steel kitchen sinks with drainage board made of Stainless Steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including necessary PVC outlet pipe and coupling complete all as specified and as directed.
60
-
-
... More
S&F in repair, stainless steel plate rack 31" X 36" X 10" made up of 1mm thick sheet (non magnetic) complete all as specified and as directed.
60
-
-
... More
S&F wash down water closet (pedestal pattern) white complete with plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern incl pedestal pan and trap, and connection to drain (or outgoing pipe) complete all as specified and as directed.
68
-
-
... More
S&F in repair, Vitreous China squatting pan, "Orissa" pattern size 580 X 440mm white with intgrel foot rest (excluding flushing cistern & flush pipe) with 110mm dia PVC SWR 'P' or 'S' trap, fixing of cistern, complete including provision of cement concrete complete all as specified and directed.
60
-
-
... More
S&F PVC valveless syphonic action type flushing cistern 10 litres capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and as directed.
128
-
-
... More
S&F in repair, 125mm size brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union fixed complete all as specified and as directed.
120
-
-
... More
S&F for Vitreous China wash basin, white, flat back size 550x400mm including 01 No cast Copper alloy 15mm CP fancy type pillar tap, 01 No 32mm waste coupling, one pair of MS bracket, cutting for and pinning in ends of brackets, etc., complete all as specified and as directed.
68
-
-
... More
S&F 600mmx450mm belvelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood with PVC/ alluminium frame and fixed to wooden plugs with chromum plated brass screws, cup washers, complete all as specified and as directed.
120
-
-
... More
S&F in repair, 550mmx350mm PVC cabinet mirror with shelves of selected quality glass and fixed on walls to wooden plugs with chromium plated brass screws, cup washers, etc., complete all as specified and as directed.
68
-
-
... More
S&F in repair, health faucet with spray jet (hand shower) chromium plated including all fittings fixtures complete all as specified and as directed.
60
-
-
... More
M&L for forming 12mm thick expansion joints for 40mm concrete slab thickness filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound grade A complete all as specified and as directed.
99.37
-
-
... More
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars, etc., complete all as specified and as directed.
269.75
-
-
... More
Dismantling stone slabs and tiles of any description or thickness in floors, plinth Protection, aprons, etc., laid, bedded and pointed in any mortar complete all as specified and as directed.
268.27
-
-
... More
Demolition of cement concrete (unreinforced) of any description of any position not otherwise specfically provided for as in sunken floors & floor, etc., complete all as specified and as dirceted.
250.45
-
-
... More
Demolition of cement concrete (reinforced) as in roof, floors (other than ground floor) beams, staircase, landing, chajjas and similar suspended work complete all as specified and as directed.
24.78
-
-
... More
Dismantling timber scantlings 40 sqcm and over in section in any position, unframed work complete all as specified and as directed.
0.9
-
-
... More
Dismantling timber scantlings in fillets, rails, post, rafter, purlin, etc., under 40 sqcm in section in any position unframed work complete all as specified and as directed.
513.6
-
-
... More
Dismantling battens for tiles, shingles, etc., of any size including tilting fillets n.exc 15cm centre to centre complete all as specified and as directed.
794
-
-
... More
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
57.29
-
-
... More
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
45.56
-
-
... More
Dismantling of AC sheets/ Galvolume sheet/ GI Sheet of corrugated or semicorrugated, etc., sheets in roof coverings complete all as specified and as directed.
3267
-
-
... More
Dismantling Mangalore pattern roofing tiles with ceiling tiles or slate roofing complete all as specified and directed.
829
-
-
... More
E/M ITEMS
-
-
-
... More
INTERNAL ELECTRIC SUPPLY
-
-
-
... More
Taking out carefully Copper/ Aluminium point wiring, light, fan, socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose, holder, regulator, DBs, etc., including making good the disturbed surface of wall/ floors complete all as specified and as directed.
1614
-
-
... More
M&L for point wiring with 3 runs of 1.5 sqmm single core PVC insulated FRLS unsheathed multi-stranded copper conductor cable, 1100 Volts grade and including non metallic rigid PVC conduit medium grade with appropriate size with all fittings concealed in wall including modular sunken box of adequate size with suitable size modular cover plates with frame for fixing modular switches, sockets, regulators, etc., complete all as specified for :-
-
-
-
... More
one light controlled by one switch.
1070
-
-
... More
one bell controlled by one switch.
60
-
-
... More
one ceiling fan controlled by one switch & regulator.
235
-
-
... More
one exhaust fan controlled by one switch.
180
-
-
... More
one 3 pin socket 6 Amp on independent board.
325
-
-
... More
one 3 pin socket 6 Amp on same board.
237
-
-
... More
All as per Item No. 151.00 but for one 3 pin 15 Amps switch socket outlet point on independent board with 4.0 sqmm PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable complete all as specified and as directed.
271
-
-
... More
S&F modular switch, single pole, one way, 6 Amps one module complete all as specified and as directed.
2047
-
-
... More
S&F modularsocket outlet 6 Amps, 3 pin, 2 module complete all as specified and directed.
562
-
-
... More
S&F modular switch, single pole, one way, 16 Amps one module complete all as specified and as directed.
271
-
-
... More
S&F modular socket outlet 2-in-1, 6/16 Amps, 2 module complete all as specified and as directed.
271
-
-
... More
S&F ceiling rose surface bakelite three terminal/ PVC/ Polycarbonate/ isolated body 65x50 mm terminals 240 Volts complete all as specified and directed.
1054
-
-
... More
S&F lamp holder suitable for B22 gear, insulated body with back plate complete all as specified and directed.
439
-
-
... More
S&F modular stepped type electronic fan regulator 220 Volts, 100 Watts complete all as specified and as directed.
235
-
-
... More
S&F modular bell push 6 Amps 1 module complete all as specified and as directed.
60
-
-
... More
S&F bell electronic 230 Volts, AC single pole complete all as specified and as directed.
60
-
-
... More
S&F LED light fittings 1x 20/ 22 Watts, 220 Volts, AC decorative box type with powder coated aluminium housing & integrated electronic driver with THD10%, 4KV surge protection 130 lumen/ Watt including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
356
-
-
... More
S&F LED light fittings 1x 10 Watts, 220 Volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
87
-
-
... More
S&F LED light fitting 1x9Watts/ 1X10Watts bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
81
-
-
... More
S&F LED security street light fitting 35/ 36 Watts, 230 Volts, engergy saving environmental friendly, long life, made up of pressure die cast aluminum hosing with high efficieny LED as lighting source and lens embeded PC cover having bottom opening separte driver compartment with IP 66 protection and impact resistance of IKO8, 10 KV surge protection and having 130 lumen/ Watt including connection with twin twisted unsheathed PVC copper cable of suitable size alongwith suitable brackets with clamps, nuts & bolts, etc., complete all as specified and as directed.
107
-
-
... More
S&F sheet metal enclosure IP-43 double door for DBs, TPN 440 Volts for 4 ways including cutting the wall for fixing the DB, making good the surface including grouting, etc., complete all as specified and as directed.
11
-
-
... More
S&F sheet metal enclosure IP-43 double door for DBs, SPN 240 Volts for 12 ways including cutting the wall for fixing the DB, making good the surface including grouting, etc., complete all as specified and directed.
52
-
-
... More
S&F sheet metal enclosure IP-43 double door for DBs, SPN 240 Volts for 8 ways including cutting the wall for fixing the DB, making good the surface including grouting, etc., complete all as specified and directed.
8
-
-
... More
S&F MCB SP 06 to 32 Amps, 240 Volts complete all as specified and as directed.
700
-
-
... More
S&F RCBO, double pole, 30mA, 32 Amps capcity, 240 Volts, 50Hz, AC supply complete all specified and as directed.
8
-
-
... More
S&F RCBO, FP 30mA, 63 Amps capacity, 240 Volts, 50Hz, AC supply complete all specified and as directed.
52
-
-
... More
S&F RCBO, FP 30mA, 63 Amps capcity, 240 Volts, 50Hz, AC supply complete all specified and directed.
11
-
-
... More
M&L in repair, concealed Submain wiring with two single core 6 sqmm PVC insulated cable FRLS type copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of 25mm dia medium grade including one run of 6 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly, etc., inluding Taking down unserviceable submain wiring complete all as specified and as directed. Note: Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.
1192
-
-
... More
M&L for earthing complete with galvanized mild steel earth plate electrode size 600x600x6mm thick buried directly in ground earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less than 1.5 meter (below ground level) connected to Galvanized Iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” Galvanized Iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” Galvanized Iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, etc., complete all as shown in Electrical Plate No 3 of SSR 2009 part-I, connected to test point and testing on completion including disconnecting the existing earthing and earthing components, etc., complete, all as specified.
74
-
-
... More
Note : (a) Cost of disconnecting the existing earthing and earthing components shall be deemed to be included in the quoted rate.
(b) The rate is deemed to be inclusive of the cost of earth work, excavation in any type soil, removal of surplus soil to a distance of 50mtrs, PCC 1:2:4 type B1 for earth pit, RCC cover with 6 Nos 6mm dia CTD bar on both direction, earth lead protection GI pipe medium grade of suitable size from earth plate electrode to main switch, etc,. (c) Length of GI earth wire up to 7.50mtr shall be measured as one unit.
-
-
-
... More
S&F single pole and neutral (SPN) enclosure with a two pin and earth plug and socket complete with one single pole 20 Amps MCB complete all as specifed and as directed.
64
-
-
... More
S&F wall fan 240Volts, 400mm sweep with all fixing arrangement complete all as specified and as directed.
8
-
-
... More
S&F exhaust fan, steel body AC single Phase, 230Volts of size 300m sweep with blades and frame and louvers complete by cutting the wall of suitable dia and making good the distrubed surfaces including all fixing arrangement at site complete all as specified and as directed.
60
-
-
... More
Taking down sealing fan, sealing the cable end, dismantling blades, removing fan and blades to store and refixing of ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed.
235
-
-
... More
M&L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good cutting not exc 10cm grith complete all as specified and as directed.
4756
-
-
... More
S&F Exhaust fan made of sturdy engineering plastic with louvers shutter, 230 Volts, 50 Hz, 1200 RPM, copper winding of sweep 250mm complete all as specified and as directed.
120
-
-
... More
HOT WATER SUPPLY
-
-
-
... More
S&F electric water heater, storage type steel body with Copper inner tank and heating element upto 2KW capacity, 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece, etc., complete all as specified and as directed.
60
-
-
... More
S&F Galvanized Iron Steel water tubing medium grade of 20mm bore complete on walls/ floors with all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions, etc., including necessary excanation, clips, wall hooks, wooden plugs, etc., and fitting with existing pipe line of any size complete all as specified and as directed.
300
-
-
... More
S&F Galvanized Iron Steel water tubing medium grade of 15mm bore complete on walls/ floors with all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions, etc., including necessary excanation, clips, wall hooks, wooden plugs, etc., and fitting with existing pipe line of any size complete all as specified and as directed.
180
-
-
... More
S&F stop valves, cast Copper alloy Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed with 20mm bore complete all as specified and directed.
60
-
-
... More
S&F bib tap fancy type Chromium plated, cast Copper alloy with crutch or butterfly handle, screwed for iron pipe size of 15mm dia connect to outlet GI pipe line complete all as specified and directed.
60
-
-
... More
ELECTRICAL CHIMNEY
-
-
-
... More
Supply, erection and testing of electrical chimney of size 90cm, suction capacity 1500 to 1800 cum/ hour, filterless autoclean technology, motion sensor, dual side touch control, multi speed option, box shape, wall mounted, made up of stainless steel, low noise (less tha 62 dB) steam auto clean with BLDC motor, stainless steel duct, metalic blower, comparising air outlet, duct, duct pipe, baffle filter, LED lamps (2Nos) etc., complete all as specified and as directed.
8
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%