Military Engineer Services Tender

Supply , fixing and commissioning Design verified as per IS /IEC-61439-1&2 LT Panel Indoor LT Panel / LT Pillar Box by CPRI Approved manufactures (as per list of make/product) of comprising of the following all as directed by removing the old existing panel complete with out damaging the existing floor / cable ducts at MES power House Fabrication Details : Main frame 3 mm thick CRCA sheet, partition sheets / covers / doors of 2 mm thick CRCA sheet, gland plates 2 mm thick MS sheet (undrilled), base frame of 75 mm MS channel with provision of incoming and outgoing cable entry at the bottom for installation, seperate chambers for Main Bus Bars, MCCBs /ACB and Cable end connections free standing floor mounted with degree of protection IP 54 and with heavy duty Hinges for doors and locking arrangements with Aldrops at front and Back Bus bar details : Material shall be copper bus bar, sleeving heat shrinkable type, with bus bar sizes for phase 1.5 times the Rating of incommer MCCB /ACB and out going shall be of rated capacity and bus bar shall be support of epoxy type insulators, earthing of 40x6 mm GI Flat.

Painting Detais : Painting shall be 7 tank processed powder coated shall be a dry finishing process that uses finely ground particles of pigment and resin based polymer that are electrostatically charged and sprayed onto electrically grounded parts Wiring : Pannel wiring shall be of 2.5 sq mm copper standard with 5A MCB wiring for controll wiring and indication lamps Accessories for Pillar Box : Digital Multifunctional Meters CT/PT programmable with RS 485 communication port CL 0.5 with direct acess to basic power and Energy parameters and Indication Lamps (LED) - 03 No. make: L&T/Secure /HPL Switch Gears: (a) Incommer:-800 A ACB MDO 4 pole with micro processor based protection system 50 KA Make: L&T/Schnider/Simens/ABB

(b) Outgoing:-(i) 400A ,36 KA, 4 pole MCCB microprocessor based along with sprader terminals along with sprader terminals-2 no,s (ii) 250A ,36 KA, 4 pole MCCB microprocessor based along with sprader terminals along with sprader terminals-2 no,s (iii) 160A ,36 KA, 4 pole MCCB Thermal Magnetic based along with sprader terminals along with sprader terminals-2 no,s (iv)100A ,21 KA, 4 pole MCCB Thermal Magnetic based along with sprader terminals along with sprader terminals-2 no,s Note : Rate quoted includes for necessary PCC foundation / steel angulars/ channels to LT pannel and includes the cost of all Accessories and switch gears, necessary cable connections with Lugs, washers nut bolts and cable glands as per site requirement (ii) Make of Switch Gears: L&T/Schnider/Simens/ABB