Indian Oil Corporation Limited Tender

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'X' shaped placed 3.00 m apart and with 5 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) /Spring core (2.5mm thick) wire of high tensile strength of 165 kg/sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Supply, Fabrication and Erection of Pre Engineered steel structures. Preparation of fabrication drawings, bill of materials, getting approval from consultant/Client, including supply and factory fabrication of Pre-engineered steel structures such as columns, column bracings, sheeting posts, rafters, roof bracings, struts,roof purlins, side runners, sag angles, sag rods, chequered plates, stair cases, ladder, Anchor bolts (anchor bolts supply by Pre Engineered Beam vendor and fixing shall be carried out by civil contractor) etc and all other structural items as required in case of canopies at ROs. This includes surface prepartion by shot/grit/copper slag blasting to Swedish Standard SA 2½ for painting, supply and application of Painting for structural members as per specifications (Primer coat: Inorganic Zinc Ethyl Silicate (P1), DFT 65-75 µm; Intermediate coat: Polyamide cured HB Epoxy MIO (U1), DFT 100-125 µm; Finish coat: Two pack Acrylic Poly-Urethane (PU) (F1), DFT 40-50 µm; Total DFT shall be minimum 215 µm) at site of approved colour, including loading, transportation, unloading, delivery at erection site, storage and handling at site, site assembly and finally erection of structures at appropriate location, alignment and bolting/welding of all structures true to line, level, plumb and dimension. The work shall be completed in all respect as per drawings, technical specification and direction of the Engineer-in-Charge. (Payment shall be made based on approved fabrication drawings)

Supply of Boundary Wall Puller. Foundation C/C- 2.130 & 650 mm depth

Supply of B.Wall Puller. C/C- 2.130

Supply of Boundary Wall / Slabs. 300 mm x Thk. 50 mm x Length 2.130 X 8 NOS. X 37 NOS. Span = 288 Nos.

Supply of Puller Cap Beam

Supply & Erection Puller Cap

Installation of Precast Materials

Transportation of B.Wall Materials