Military Engineer Services Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 97,645Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_682030_2Tender No
TOKEN NO GE ABH-61/24-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Taking down shutter of any description exc 1 sqm and n exc 2.00 sqm each and removing to store yard all as specified and directed by Engineer-in-Charge.
17
-
-
... More
Refixing of shutter in same opening of any description exc 1 sqm and n exc 2.00 sqm each all as specified and directed by Engineer-in-Charge.
15
-
-
... More
Refixing of shutter in other opening of any description exc 1 sqm and n exc 2.00 sqm each all as specified and directed by Engineer-in-Charge.
12
-
-
... More
S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes including painting of edges to match with sheet,all as specified & shown in relevant drawing of item No. 8095 in MES SSR -2020 ( Part-II ),fixed in opening complete all as specified and directed by Engineer in Charge.
42.3
-
-
... More
Supply and fixing factory made solid core PVC door shutter 30mm thick (stiles) consisting of frame made out of MS tubes of 19mm gauge thickness and size of 19mmx19mm for stiles and for top and bottom rails 15mmx15mm. MS frame shall have a coat of red oxide primer of approved make and shall be covered with heat moulded plain colour PVC sheet, 'C' channel of size 30x50mm forming stiles and 5mm thick wide PVC sheet strip of 20mm width stuck inside with solvent cement for stiles, and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and 10mm (5x2mm) thick, 20mm thick PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with 30mm wide x 5mm thick PVC sheet beading on either side and joined together with solvent cement adhesive and an additional 5mm thick PVC strips of 20mm width is to be stuck on interior side of C channel using PVC solvent adhesive as per manufacturer's instructions, door to be fixed to frame with and including 3 Nos MS powder coated butt hinges of size 100mm long x 25mm wide and 2mm thick and fixing with 32mm long steel screws drilled suitable to pass through both the walls of the MS tube complete all as specified in SSR-2009 (Part-I, specifications) & shown in relevant drawing of item No. 8080 in SSR-2010 (Part-II, rates). The width of stiles & rails will be in proportion to the width of the door shutter as specified in SSR-2010 (Part-II). complete all as specified and as directed by Engineer-in-Charge.
11.76
-
-
... More
S & F pressed steel door frames with one or more rebates including necessary fixing lungs hinges lock strike plate etc complete all as specified size of frame 105 x 60mm all as specified and directed by Engineer - in - Charge .
51
-
-
... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
81.6
-
-
... More
M&L Cement concrete 1:2:4 type B–1 filling of pressed steel frame and hold fast blocks etc all as specified and directed by Engineer - in - Charge.
0.53
-
-
... More
S & F flush shutter 35mm thick solid core construction with block board core and plywood face panels commercial type on both sides with lipping / frame to match all as specified and directed by Engineer - in - Charge.
20.28
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as per direction of Engineer-in- Charge.
28.08
-
-
... More
Providing and fixing 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type skeleton door shutter open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, mesh etc.; and comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as per direction of Engineer-in- Charge.
28.08
-
-
... More
S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
78
-
-
... More
Material and labour for providing kitchen cabinet and cubboard in required sizes at site made out of 18mm thick PVC sheet (prelam) having one side decorative laminated sheet (for shutter, sides of cabinet, partition and shelves etc). All the edges of shutter and front exposed edge of partition/shelves shall be covered with 2mm thick edge bonding tape as per manufacturer, including all required fixing material such as SS brackets, screws, adhesive etc., including taking out old any type cabinet complete all as specified and as directed by Engineer-in-charge.
Note :- (i) The area of each sheet (shutter, sides of cabinet, partition and shelves) shall be measured in sqm for payment.
(ii) Magnetic catcher, handles, continuous Piano hinges and PVC frame (where required) shall be measured and paid separately under appropriate item of BOQ.
(iii) Any other material required for making/fixing/hanging of cabinet shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.
50.4
-
-
... More
S&F Aluminium handle cast type anodized 125 mm long all as specified and directed by Engineer-in-Charge.
144
-
-
... More
S&F Aluminium anodized barrel tower bolt of extended section and fixed 150 mm long all as specified and directed by Engineer-in-Charge.
18
-
-
... More
S&F Aluminium anodized barrel tower bolt of extended section and fixed 200 mm long all as specified and directed by Engineer-in-Charge.
88
-
-
... More
S&F in repair aluminium anodized barrel tower bolt of extended section and fixed 150 mm long all as specified and directed by Engineer-in-Charge.
10
-
-
... More
S&F in repair aluminium anodized barrel tower bolt of extended section and fixed 200 mm long all as specified and directed by Engineer-in-Charge.
24
-
-
... More
S&F 100 mm long butt hinges extruded almiunium alloy with galvanised mild steel hinges pin, anodised and fixed all as specified and directed by Engineer-in-Charge.
27
-
-
... More
S&F 150 mm long aluminium handle cast type anodised all as specified and directed by Engineer - in - Charge.
88
-
-
... More
S&F in repair 150 mm long aluminium handle cast type anodised all as specified and directed by Engineer-in-Charge.
24
-
-
... More
S&F 250 mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & directed.
28
-
-
... More
S&F in repair 250 mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & directed.
24
-
-
... More
S & F Magnet ball catcher for cupboard shutter, complete all as specified and directed by Engineer - in-Charge.
96
-
-
... More
S & F continous (Piano) type hinges mild steel bright finish or lectro galvanised with wide of flaps 30mm complete all as spd and directed.
60
-
-
... More
S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge.
16
-
-
... More
S&F Alum door stopper of any description all as specified and directed by Engineer-in-Charge.
60
-
-
... More
S&F factory made prefabricated pressed steel door frame made out of mild steel 1.25 mm thick girth of frame 185 mm including necessary MS rawl plug/bolts and fixing 75 mm long butt hinges medium weight cold rolled mild steel etc and shutter including stiffeners made out of mild steel sheet 1.25 mm thick cut to size, holes punched and welded seams including bending or turning up all around, mitred angle etc as required with locking arrangement using mild steel mortice lock 4 levers with 2 Nos of keys of size 100 mm (Make Godrej/Harrison/Navtal) including MS chromium plated handle and 2 Nos MS locking rods out of 8mm dia not exc 1000mm long fixed to mortice lock and handle with necessary bolts and nuts covered by MS sheet 1.25 mm thick complete including two coat of synthetic enamel paint over a shop coat of zinc chromate primer on interior surface (not visible from front) and hammer tone paint on exterior surface (visible from front) complete as per Godrej pattern all as specified and directed by Engr-in-charge drawing complete all as specified and directed by Engineer-in-charge. (Note : Girth of frame will be measured seperately under same item)
55
-
-
... More
S&F powder coated anodized aluminum frame for doors, windows , ventilators with one of more rebates including joining cleat for fixing etc. completed all as specified
620
-
-
... More
S&F powder coated aluminum window/ventilators shutter side hung type without sash, aluminum section weighing glazed clips, rubber packing anodized aluminum fittings such as peg stays 150 mm long (1 nos) hinges type B-21 100 mm long (2 Nos) suitable handle (1 Nos) complete all as specified.
220
-
-
... More
S&F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
18
-
-
... More
S&F aluminum anodized grill diamond shape 100mm x 100mm aperture of 6 mm dia round bars including necessary joining cleats, clips anodised complete all as specified.
220
-
-
... More
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specifed and directed.
115
-
-
... More
S&F 4 mm thick sheet glass ordinary quality n exc 0.5 sqm in each pane fixed in aluminium window / ventilator cut to required size and fixed with PVC / Neopane gasket etc. complete all as specified.
88
-
-
... More
S&F 4 mm thick glass frosted on one side n exc 0.5 sqm in each pane on one side ordinary quality fixed in aluminium window/ ventilator cut to required size and fixed with PVC/Neopane gasket etc. complete all as specified.
7
-
-
... More
M&L preparing surface of wood and wood based surface new on any description not other wise described over 10cm with or grith and applying two coat of synthetic enamel paint over a coat of pink primer all as specified and directed by Engineer - in - Charge.
44.62
-
-
... More
M&L applying two coat of synthetic enamel paint on old decorated wooden surfaces exc 10 cm width or girth, including preparation of surfaces, complete all as specified and directed.
160
-
-
... More
M&L for applying one coat of synthetic enamel paint on old decorated steel surfaces exc 10 cm width or girth including preparation of surfaces , complete all as specified and directed.
15
-
-
... More
M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.
25
-
-
... More
Demolition of cement concrete (un reinforced) of any description in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work all as specified.
1
-
-
... More
Material and labour for Preparing surface of old roof slab and cleaned of all foreign materials such as fungus, moss, dust etc, by wire brushing dusting, sprinkling water on the surface and ensure water does not stand anywhere. If it is so, the roof surface shall be leveled than surface shall be painted with one coat of cold applied bituminous primer @ 0.40 ltr per sqm, applied over primed surface APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application, torching with overlaps as recommended by the manufacturer complete all as specified and as directed by Engineer-in-charge.
70
-
-
... More
M&L for Endura Cool roof tiles 300 x 300 x 10 mm white vitrified water absorption 0.5% SRI 90 (ASTME 1980, EN673 and En 411) BEPL (Building energy performance laboratory) certified laid over screed bed or bedding layer of mortar 15 mm thick CM (1:4) complete all as specified and as directed.
190
-
-
... More
M & L PCC 1:2:4, type B-1 , using 20mm graded stone aggregate as in kerbs or mud stops, rounded or chamfered on edges and similar work all as specified and as directed.
0.5
-
-
... More
M&L machine cut kota stone slab flooring 16-18mm thick in single piece over cement screed base laid and jointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing complete inculding screed bed or bedding layer of mortar 15 mm thick CM (1:6)all as directed by Engineer-in-Charge.
70
-
-
... More
M&L for kota stone slab flooring 16-18mm thick in single piece in riser of steps,skirting,dado and pillar laid and jointed with grey cement mixed with pgment to match the shade of the slab including rubbing and polishing complete inculding screed bed or bedding layer of mortar 15 mm thick CM (1:6)all as directed by Engineer-in-Charge.
10
-
-
... More
M&L 14-16 mm thick granite (of any type ) work (table rubbed and polished ) in cooking platform and like in cm (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite over 15 mm thick screed bed in CM 1:4 complete all as specifed.
22
-
-
... More
Demolation of ashlar facings, dressed stone work, stone slabs or tiles from paving and precast concrete blocks and articles all as specified.& directed by Engineer -in-charge..
2.55
-
-
... More
Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc.
1200
-
-
... More
M&L 10mm thick rendering in cement mortar 1:3 on fair faces of brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge .
100
-
-
... More
M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge .
500
-
-
... More
M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge .
500
-
-
... More
M&L Washed coloured stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 pigmented stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately).
100
-
-
... More
Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using aluminium channel, screwed to the under layer of panels complete as per specifications and direction of the Engineer-in-charge
220
-
-
... More
M & L applying three coat of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified.
100
-
-
... More
M & L for complete removal of existing treatment and applying two coats of white wash on old decorated plastered or unplastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .
550
-
-
... More
M & L applying three coat of white wash on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.
150
-
-
... More
M & L for complete removal of existing treatment and applying two coats of white wash on old decorated plastered or unplastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .
225
-
-
... More
M & L Preparation of newly plastered surfaces by applying two coats of interior grade wall putty and making it smooth with sand paper by mechanical method i.e. with hand electric grinder then applying two coats of oil bound distemper over one coat of cement primer including all as specified by mechanical method i.e. spray gun all as specified and directed by Engineer-in-charge.
350
-
-
... More
M & L Preparation of Old plastered surfaces by removing old treatment and applying two coats of interior grade wall putty and making it smooth with sand paper by mechanical method i.e. with hand electric grinder then applying two coats of oil bound distemper over one coat of cement primer including all as specified by mechanical method i.e. spray gun all as specified and directed by Engineer-in-charge.
1400
-
-
... More
M & L applying two coats of cement base paint over a coat of alkali resistant primer on newly plastered or unplastered wall surface including preparation of surfaces complete all as specified.
500
-
-
... More
M & L for complete removal of existing treatment and applying two coats of cement base paint over a coat of alkali resistant primer on plastered or unplastered wall surface including preparation of surfaces complete all as specified.
740
-
-
... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), remving serviceable tiles to stores and and rubbish off the permises.
954
-
-
... More
M & L for glazed ceramic coloured tiles 7mm thick 300 x 450 mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick cement sand plaster (1:3) complete all as specified and directed by Engineer - in - Charge.
410
-
-
... More
M&L Non skid ceramic coloured /printed tiles 400*400* 7 to 8 mm thick( square /rectangular) and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm th screed bed in CM 1:6 complete all as specified and directed by Engr in Charge.
34
-
-
... More
M&L Non-skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm th screed bed in CM 1:6 complete all as specified and directed by Engr in Charge.
510
-
-
... More
M & L 25 mm thick Cement Concrete 1:2:4 type B–0 using 12.5mm graded stone aggregates flooring finished even and rough to receive topping layer all as specified and directed by Engineer - in – Charge .
35
-
-
... More
M & L for 75mm thick cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in sub floors, sub bases etc all as specified and directed by Engineer - in - Charge.
202
-
-
... More
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand.
180
-
-
... More
S&F 600mm x 450mm beveled edge mirror of selected quality glass on 6mm thick commercial plywood and fixed wooden plugs with chromium plated brass screw and cup washes fixed in repair.
12
-
-
... More
S&F in repair stainless steel sink overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, complete all as directed.
12
-
-
... More
S & F in repair stainless steel plate rack of size 900x775x250mm of 1mm thick stainless steel of 1st Quality all as specified and directed by Engineer-in-Charge.
12
-
-
... More
S&F 25 mm dia drapery curtain road with decoative end knobs complete with brackets and fixed to walls complete all as specified and directed by Engineer-in-Charge.
130
-
-
... More
Dismantling water tanks and removing to store of 500 ltr capacity
6
-
-
... More
S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top) hoisted and fixed in position of 500 ltrs capacity fixed with PVC tank nipples,complete all as specified in SSR Part I.
6
-
-
... More
M&L ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore iron pipe supplied and fixed complete all as specified and as directed by Engineer-in-charge.
6
-
-
... More
Disconnecting existing tanks of 500 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately)
6
-
-
... More
Cleaning and removing all scale and dirt, etc, from tanks of 500 litre capacity and from mouths of circulating pipes etc
6
-
-
... More
M&L in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore iron pipe supplied and fixed complete all as specified and as directed by Engineer-in-charge.
6
-
-
... More
S&F gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia all as directed.
24
-
-
... More
M&L for Water proofing treatment to RCC sunken slab (not exceeding 45cm depth of sunken) as specified below complete all as specified and directed by Engineer-in-Charge. :- (a) Cleaning the surface with wire brush/coir brush, removing lose material like dust particles, dirt etc. (b) Applying 15 mm plaster in CM 1:3 with WPC on raised verticle surface and on existing floor. (c) Creating fillet coving of 50x50 mm with polymer modified mortar on the junction of slab and walls (d) Apply first coat of two component modified polymer coating on the horizontal and verticle surface (e) Provision of glass fiber mesh of 2 x 2 mm immediately on above coating (f) Apply second coat of two component modified polymer coating after 72 hrs (g) Cement concrete 1:4:8 over the coating as per requirement (h) Joining the saintary pipes with the water proofing tape having bridging ability of more than 1.5 mm (j) Filling the gap between the wall opening and saintary pipe with non shrink cementatious grout complete as specified. Manufacturer : Make : - Dr.Fixit/Fosroc/STP/Asianpaints. Note: 1. The treatment shall be carried out by approved authorised applicator approved by GE as per manufacturer instructions and as directed by Engineer-in-charge. 2. PCC filling in sunken portion will be measured seperately. 3. Plan area of floor shall be considered for payment.
22
-
-
... More
M & L PCC (1:5:10) using 40mm graded burnt bricks aggregate as in foundation filling & mass concrete or as in sunken floor complete all as specified.
7.04
-
-
... More
Taking down eves and gutter and rain water of any size all as specified and directed by Engineer - in - Charge .
80
-
-
... More
Dismantling of CI pipes or reinforced concrete pipes 100 mm dia fixed to wall etc complete all as specified and directed.
75
-
-
... More
Dismantling of CI pipes or reinforced concrete pipes 75 mm dia fixed to wall etc complete all as specified and directed.
65
-
-
... More
Supply & fixing 110mm bore PVC (SWR) pipes single socketed (pressure rating not less than 6kg/sqcm) in any length with rubber ring joints for drain or rain water fixed along walls with and including PVC clamps, complete all as specified and as directed by Engineer-in- charge.
80
-
-
... More
S&F 110mm PVC (SWR) pipes single socketed(pressure rating not less than 6kg/sqcm) in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.
15
-
-
... More
Supply & fixing 75mm bore PVC (SWR) pipes single socketed (pressure rating not less than 6kg/sqcm) in any length with rubber ring joints for drain or rain water fixed along walls with and including PVC clamps, complete all as specified and as directed by Engineer-in- charge.
120
-
-
... More
S&F 75mm PVC (SWR) pipes single socketed(pressure rating not less than 6kg/sqcm) in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.
20
-
-
... More
Supply & fixing PVC (SWR) bends (any radius) suitable for 110mm bore pipe complete all as specified and as directed by Engineer-in- charge.
16
-
-
... More
Supply & fixing PVC (SWR) bends (any radius) suitable for 75mm bore pipe complete all as specified and as directed by Engineer-in- charge.
13
-
-
... More
Supply & fixing PVC (SWR) floor trap, plain with grating, suitable for 100/75mm bore pipe including jointing with solvent cement complete all as specified and as directed by Engineer-in- charge.
24
-
-
... More
S&F in repair SS bottle trap of 32mm bore dia of discharge pipe with minimum water seal of 25mm complete all as specified and as directed.
24
-
-
... More
Supply and fixing PVC (SWR) reducer 110/75 complete all as specified and as directed by Engineer-in-charge.
12
-
-
... More
Supply & fixing PVC (SWR) vent cowl suitable for 75mm bore PVC pipe complete all as specifiedand as directed by Engineer-in- charge.
12
-
-
... More
Supply & fixing PVC (SWR) of size 110 mm sanitary connection socket to fit out let of WC complete all as specified and directed by Engineer-in-Charge.
12
-
-
... More
Supply & fixing 110mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement, with access door complete all as specified and as directed by Engineer-in- charge.
12
-
-
... More
Supply & fixing 75mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement, with access door complete all as specified and as directed by Engineer-in- charge.
24
-
-
... More
S&F 110mm PVC(SWR) couplers complete all as specified and directed.
12
-
-
... More
S&F 75mm PVC(SWR) couplers complete all as specified and directed.
5
-
-
... More
S&F 110mm PVC(SWR) branch piece, single (single Y) equal or unequal fixed with solvent cement, with oval access door, complete all as specified and directed.
8
-
-
... More
Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store
20
-
-
... More
Taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store
90
-
-
... More
Taking up or down steel tubing of 25 mm bore and connections, including cleaning for re-fixing or removal to store
15
-
-
... More
Refixing 15 mm old steel tubing and connections in new or old possition ( wall ceiling floors, etc.)
20
-
-
... More
Refixing 20 mm old steel tubing and connections in new or old possition ( wall ceiling floors, etc.)
40
-
-
... More
Refixing 25 mm old steel tubing and connections in new or old possition ( wall ceiling floors, etc.)
5
-
-
... More
S&F mild steel tubes of size 20 mm bore (medium grade) galvanised with all fittingsand fixed complete to wall all as specified.
50
-
-
... More
S&F mild steel tubes of size 25 mm bore (medium grade) galvanised with all fittings and fixed complete to wall or floors all as specified.
10
-
-
... More
S&F in repair vitreous china wash down water closet pan padestel pattern white including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia including Jet spray and plastic seat cover with mild steel chromoum plated hinging and 'P' or 'S' trap device complete all as specified and directed by Engineer-in-Charge.
6
-
-
... More
S & F in repair PVC 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve, float and handle including brackets, flush pipe of PVC 32mm bore and connection to WC pan complete all as specified .
12
-
-
... More
S&F in repair vitreous china,white wash hand basin ,pedestal type, flat back size 550x400mm complete all as specified and directed by Engineer-in-Charge.
6
-
-
... More
S&F in repair bib taps long body, 15mm bore dia, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified .
36
-
-
... More
S & F in repair 15mm bore CP Angle cock one way chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified .
48
-
-
... More
S&F in repair 15mm stop valves fancy type, chromium plated with long shank and cup (concealed type) ,cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed.
24
-
-
... More
S&F sink mixer with swinging spout (wall mounted model) chromium plated brass with connection and nut complete all as specified and directed by Engineer-in-Charge.
12
-
-
... More
S & F in repair for brass chromium plated shower rose 150 x 150 mm size with swivel joint including fixing to 15 mm dia steel pipe or union.
12
-
-
... More
S & F soap dish brass chromium plated, fixed to plugs with brass chromium plated screws complete all as specified and directed by Engineer - in - Charge.
24
-
-
... More
S & F brass chromium plated tubular towel rail 20mm dia “D” type 60 cm long between flanges incldg brackets complete all as specified and directed by Engineer - in - Charge .
12
-
-
... More
S&F in repair PVC connection both side brass unions internal for size 15mm dia and 600mm long all as specified and directed by Engineer-in-Charge.
48
-
-
... More
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.
6
-
-
... More
M & L RCC 1:1½:3, (nominal mix), Type A-1, using 20mm graded aggregates as in chajjas, fins, fascias,shelves , louvers, parapets and railing etc and the like including necessary formworks all as specified and directed by Engineer - in - Charge.
2
-
-
... More
S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia.
200
-
-
... More
Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed.
6
-
-
... More
M&L Brick work with old size burnt fly ash bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed by Engineer - in - Charge .
6
-
-
... More
M&L 50mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection, surface finished even smooth without using extra cement.
50
-
-
... More
S&F fibre sheet 2mm thick reinforced translucent plain sheeting with drilling punching corrougation fixed with coach screw and washer etc in angle wall and other necessary item, complete all as specified
25
-
-
... More
S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; Cooler Stand, railings; framework of water tanks & similar work conforming to Fe 290 Gde E-165
1100
-
-
... More
Shortcreting 25MM thick in RCC columns, beams and slabs etc in layers with approved design mix(minimum cement content of 350 Kg/Cum on M-25) concrete having the specified minimum characteristic compressive strength (with ordinary protland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria) including the cost of certering and shuttering at edges and corners etc as directed by Engineer-in-Charge including Chipping of unsound/weak concrete material 25mm average thickness from slabs, beams, columns etc with manual chisel and/or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes and thoroughly washing with water and allowing it to dry etc. including removal of rust by applying approved rust removal chemical & the coating with Dr Fixit epoxy zinc primer@6 sqm/ltr at DFT of 100 microns as per specifications and disposal of debries for all lead and lifts all complete as per direction of Engineer-in-Charge.
Note : After completion of shorcreting the splash of cement on wall to be cleaned completely.
70
-
-
... More
M&L for Shotcreting 25MM thick in RCC Facias, beams n.exc 450 mm in layers with approved design mix (minimum cement content of 350 Kg/Cum on M-25) concrete having the specified minimum characterristic compressive strength (with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria) including the cost of certering and shuttering at edges and corners etc as directed by Engineer-in-Charge including Chipping of unsound /weak concrete material 50mm average thickness from RCC Facias, beams with manual chisel and /or by standred power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes and thoroughly washing with water and allowing it to dry etc. including removal of rust by applying approved rust removal chemical & the coating with Dr Fixit epoxy zinc primer@ 6sqm/ltr at DFT of 100microns as per specifications including fixing hard drawn steel wire fabric not exceeding 4 Kg / Sqm cut to lengths, bent to shape required and disposal of debries for all lead and lifts complete all as specified and directed by Engineer-in-Charge
40
-
-
... More
S & F Hard drawn steel wire fabric not exc 4Kg/Sqm cut to lengths, bent to shape required and typing with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcement all as specified & directed by Engineering-in-Charge.
240
-
-
... More
M&L for ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed by Engineer - in - Charge .
50
-
-
... More
Taking down carefully existing aluminium/Copper point wiring light, fan socket or power bell complete with fitting such as sockets, ceiling roses, pendants batten holders regulators socket, call bells & making good to the disturbed surfaces of walls, matching the colour with existing Surface all as spd and directed by Engr-in-Charge. Note: Rate for making good shall be deemed to be included in above item rate.
356
-
-
... More
Taking down unserviceable main switches and MCB distribution boards single phase complete all as spd
12
-
-
... More
M & L for point wiring complete with 1.5 Sqmm (Nominal area) PVC insulated multustranded fire retardant (low smoke unsheathed and multicore copper conductor cable with colour code ISI marked and including PVC concealed conduict ISI marked and conduit fittings for Modular light point/fan point/exhaust fan controlled by one switch including PVC insulated 1.5 Sqmm single core copper earth wire to common earth and connecting to earth dolly and including suitable Modular metal flux box of suitable size and covered with & including 3 mm thick bakelite, laminated hylem sheet top cover etc complete all as specified (Cost of MS sunken box and bakelite sheet included in the rate).
232
-
-
... More
All as per Srl item No. 137 here-in-before but one three pin modular socket outlet 5 Amps on the independent board complete all as specified.
42
-
-
... More
All as per Srl item No. 137 here-in-before but one three pin modular socket outlet 5 Amps on the same board complete all as specified.
42
-
-
... More
All as per Srl item No.137 here in before but with 1.5 Sqmm (nominal area) PVC insulated multistranded copper conductor cable unsheathed ISI marked controlled by two way switches complete all as specified.
4
-
-
... More
M&L for point wiring complete with 2.5 Sqmm (Nominal area) PVC insulated multistranded fire retardant low smoke unsheated and stranded copper conductor cable ISI marked in and including PVC concealed conduit medium quality and conduit fitting for 3 pin 15 amp multicore switch socket combination including PVC insulated 2.5 Sqmm single core copper earth wire to common earth and connected to earth dolly and including suitable Modular metal flux box of suitable size and covered with & including 3 mm thick bakelite, laminated hylem sheet top cover etc complete all as specified.
36
-
-
... More
S&F switch Modular type single pole one way 6 Amp,230 VAC supply.
316
-
-
... More
S&F switch Modular type single pole two way 6 Amp,230 VAC supply. .
4
-
-
... More
S&F Modular socket Socket, 6A - 2/3 pin combined 2 module, 230 VAC supply, .
84
-
-
... More
S&F switch Modular type single pole one way 15 Amp on laminated sheet top cover complete to all as spd (Sheet top cover incl in point wiring) .
36
-
-
... More
S&F Modular Socket 6A/16A - 2/3 pin combined 2 module,230 VAC .
36
-
-
... More
Supply & fixing PVC Lamp holder suitable for and including batten fittings ,LED Electric lamp 9 Watt with backalite 20mm back plate complete all as specified & directed, .
72
-
-
... More
M&L for Ceiling Rose, surface bakelite 12 to 3 terminal, 240 volts, 5 Amp ISI marked complete all as specified and directed.
156
-
-
... More
S&F Electric bell ding dong complete all as spd
12
-
-
... More
S&F bell push flush type 5 Amp, complete all as spd
12
-
-
... More
S&F of fan regulator step down electronic type heavy duly flush type 230 volts AC single phase fixed on laminated sheet top cover (laminated top cover is included in point wiring) and connecting up complete all as specified and directed. (Laminated sheet top cover and sunken box is included in point wiring).
36
-
-
... More
M&L for LED 10W bulkhead fitting with IP-43 engineering plastic housing with clear ,single phase 240V, including 1.0sqmm copper flexible cable twiested three core alongwith flelxible PVC condiut from ceiling rose to fitting testing complete all as specified and directed .
20
-
-
... More
Supply and fix LT main control board of CRCA sheet metal board of size 100cmX80 cm X 25 cm made out of 2 mm thick sheet vermin proof, including painting with 2 coats of synthetic enamelled paint over a coat of red oxide including copper busbar and fixed on/inside wall for fixing arrangement of existing electronic meter incl internal connection with suitable size of copper conductor wire and accessories , locking arrangement with opening handle comprises following euipments,internal wiring and termination of external cables, lugs nad glands and conduit as required including taking out of existing old unserviceable main control board comprising following : (A) Incoming :- MCCB 4P , 100 Amps, 415 Volts 16 KA - 01 Nos (B) Copper bus bar 200 Amps for phase and neutral and earth bar (C) Outgoing MCB SPN 40 Amps - 06 Nos. (D) Outgoing MCB SPN 10 Amps - 01 No.
2
-
-
... More
S & F of MCB suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA and 6 to 32 Amps all as specified and directed.
72
-
-
... More
S & F of MCB suitable for 240 volts AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA and 16 to 40 Amps all as specified and directed.
12
-
-
... More
S&F Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 8 way 240 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed..
12
-
-
... More
S&F and testing LED light fitting 1x18watt 4 feet long including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through h oles. The system wattage of fitting should not be more than 18 watt= 10%, surge protection of minimum 2 KV power factor should be more than 0.90 cool while colour, total hormonic distoration (THD) should not be more than 15% lumen output should not be less than 1700 lumens, total input voltage range 140-280V AC, colour rendering index should not be less than 80, Corelated colour should be minimum 6000 degree Kelvin.
72
-
-
... More
M & L for Sub main wiring with 2 single core 6 Sqmm PVC insulated FRLS cable with multicore copper conductor drawn into and including PVC conduit rigid non metallic of suitable dia with and including independent PVC insulated one run 6 Sqmm single core copper earth wire complete all as specified. (Note:- Three lengths of 6 sqmm cable and will be measured as one length).
100
-
-
... More
S&F of air freshner pvc exhaust fan of 250-300mm sweep mounted in suitable opening arrangement with louvers suitable for operation on 230 volts, single phase, 50 cycle per second, AC supply and connecting up including three core PVC insulated PVC sheated copper conductor flexible cable 24/0.2mm drawn in flexible PVC conduit fixing in wall and making suitable hole for air freshner fan with necessary finishing of the surface good after fixing the fan complete all as specified and directed by Engg-in- Charge.
12
-
-
... More
S&F of Exhaust fan 300 mm 240 volts with metal body and louvers with incl all accessories and making hole if required at site , fixing, plastering, painting with existing color at site, after finishing the work.
12
-
-
... More
S&F for WEE Plus LED Bldg security light luminaire of capacity 20/25 Watt an ideal energy efficient solution for upgrading conventional GLS bulkhead luminaires to LED bulk head IP 65 complete all as specified and directed by Engr-InCharge Make: Bajaj BIBWP LED 25W WH or equivalent in Havlls/Crompton Greaves/ Philips/Wipro/Syska as approved by GE.
4
-
-
... More
Taking down carefully, dismantling ceiling fan of any make sweep and size and reassembling after necessary repairs overhauling,greasing, oiling and replacement of worn out spares, sealing cable ends, dismantling blades, opening up for inspection and transportation to contractor’s workshop and back including hanging, fixing and connecting up and testing complete all as directed by Engineer-in-Charge. Note 1. Material and labour required for rewinding of fan motor shall be measured and paid for separately. 2. Spare parts where ever required for replacement shall be measured and paid for separately as supply only and fixing is including under this item.
36
-
-
... More
Material & labour for rewinding of ceiling fan motor 1200/1400mm sweep with super enameled copper wire of existing specification, gauge and weight including insulating etc complete all as specified and as directed by Engineer-in-charge. Brand of copper wire -: Atlas / Devi Dyal/BPL
36
-
-
... More
Supply and fixing only ball bearing of existing No. and size suitable for ceiling fan 1200 / 1400 mm sweep of any make including necessary greasing etc complete all as specified and as directed by Engineer-in-charge. Make: SKF/NBC
36
-
-
... More
Supply and fixing only gun metal bush of existing No. and size suitable for ceiling fan 1200 / 1400 mm sweep of any make including necessary greasing etc complete all as specified and as directed by Engineer-in-charge. Make: SKF/NBC
36
-
-
... More
Supply and fixing only Rubber bush of existing No. and size suitable for ceiling fan 1200 / 1400 mm sweep of any make including necessary greasing etc complete all as specified and as directed by Engineer-in-charge. Make: SKF/NBC
36
-
-
... More
Supply and fixingonly Ceiling Fan Capacitor 3.15 MFD including necessary connections complete all as specified and as directed by Engineer-in-charge. Make : KELTRON / USHA / UNISTAR.
36
-
-
... More
S&F for twin core twisted copper flexible wire/cable of size 23/.0076 for ceiling fan complete all as spd and dir .
36
-
-
... More
Supply and fixing only top and bottom canopy with U clamp suitable for ceiling fan 1200 / 1400 mm sweep of any make including suitable colour match as existing complete all as specified and as directed by Engineer-in-charge. Make: SKF/NBC
36
-
-
... More
S&F only down rod 300 mm long of size 20 mm dia for ceiling fan complete all as spd and dir.
36
-
-
... More
S&F only Ceiling fan blade suitable for 1200/1400 mm sweep suitable for existing make & type as per sample complete all as spd and dir.
36
-
-
... More
Taking down complete ceiling fan of size 1200/1400 mm sweep down rod with its accessories and filling the cavities with filler material and painting of ceiling fan removing old paint with brush and spray painting with two coats of synthetic enamelled paint after reassembling spares for serviceable condition complete all as specified and directed by Engr-in-Charge.
36
-
-
... More
Disconnecting electrical/mechanical connections and taking down existing u/s storage type water heater (Geyser) Capacity 25 ltrs of any make,type and size by unscrewing nuts,bolts,washers and transporting to store yard of MES at Fazilka(site of repairs) where necessary repairs to be carried out, opening up , inspecting the defects jointly by contractor or his rep and Engg-in-charge,making joint inventories of defects to be rectified and spared to be replaced , re-assembling after repairs and replacement of spares, transporting back to the location from where taken down and fixing in original position and making the water and electrical connections, testing and making functional ect complete all as specified and directed by Engr-in-Charge. Note:- Replacement of spare parts such as Inner assembly, inner tank, glass wool & outer body shall be measured and paid separately under respective items.
12
-
-
... More
Supply and fixing MS outer cover as per existing thickness with nuts , bolts,clamps,brackets duly painted with two coats of synthetic enamel paint with spray gun over a coat of red oxide primer rubber clamps base plate,screws etc for storage type water heater of capacity 25 Ltrs all as specified and directed by Engr- in-Charge.
12
-
-
... More
Replacement of Geyser Inner tank of capacity 25 Ltrs including nut bolts, rubber sheet and necessary connected items and after repairing refixing the same at site making all electrical connections, testing, commissioning complete all as spd and dir by Engr-in-Charge.
12
-
-
... More
Supply and fix compressed glass wool 48 mm thick between outer body and inner tank of geyser by means of adhesive all as specified and directed by Engr-in-Charge.
12
-
-
... More
Supply and fixing geyser inner assembly 09 holes of brass with inlet/outlet & over flow provision rubber washer suitable for 25 ltrs capacity all as specified and directed by Engr-in-Charge.
12
-
-
... More
Supply and fixing in replacement heating element 1500 watt of suitable shape and size,any specification, confirming to ISI with PVC rubber washer clamps type all as specified and directed by Engr-in- Charge. Make: Daspass/Recold/Bajaj
12
-
-
... More
S&F in replacement of thermostat of size 0-90, thermostat switch suitable for storage type geyser all as specified and directed by Engr-in-charge, Make :Daspass/Denfoss/Bajaj
12
-
-
... More
S&F PVC Connection 450 mm long 15 mm for cold pipe line
12
-
-
... More
S&F PVC Connection 450 mm long 15 mm for cold pipe line
12
-
-
... More
Taking down complete storage type water heater (Geyser) of capacity 25 Ltrs with its accessories and filling the cavities with filler material and painting of geyser removing old paint with brush and spray painting with two coats of synthetic enamelled paint after reassembling spares for serviceable condition complete all as specified and directed by Engr-in-Charge.
12
-
-
... More
Supply and fixing GI pipe galvanised " Medium class " with all fitting laid in trenches of size 20 mm dia bore.
54
-
-
... More
S & F stop valve size 20 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions and fixed.
3
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%