Military Engineer Services Tender

Chair dining with cushion (Drg No. FD/MAP-II/04) : Chair dining with cushion (Drg No.FD/MAP-II/04) All as shown on drg and specification. Overall size shall be 450mm wide x 450mm deep and 950mm height , 450mm high up to seat . Description : a) All wood to be used shall be 1st class hard teak wood .b) The seat of chair shall be made of 40 density foam cushion ( Make - Sleepwell / Kurlon) having thickness 75mm. the cushion shall be placed and pasted on 12mm BWR plywood as per size of seat duly covered with approved tapestry cloth of rate not less than Rs 450 per mtr. The seat shall be fixed over the rail and screwed from wood stopper with 30mm long screws. (c) PVC hard rubber ring of dai 25mm shall be provided to bottom of each leg with 20mm long screws.Rest all specifications and dimensions are as per drg Finish : The chair shall be polished in high gloss melamine polish in walnut shade after preparation of surface.

Sofa set 5 Seater with cushion (Drg No. FD/MAP-II/02) : Overall size of three seater shall be 1730mm wide, 725mm deep and 530mm high up to arm level and one seater shall be 670mm wide and 725mm dee and 530mm high up to arm. All wood to be used shall be 1st class hard teak Wood. Soda set five seater shall consist of one three seater and two single seats. 10xNos of foam cushion to each set each of size 530m,mx560mmx100mm thick of 40 density coverd with white lining cloth and best quality tapestry cloth of rate not less than 450 per mtr shall be provided with nylon zipper at one edge duly covered under the tapestry cloth flap. PVC hard rubber shoes of 25mm dia shall be provided to bottom of each leg with 20mm long screws.All wooden surface shall be polished with high gloss melamine polish in walnut shade after preparation of surface. Rest all specification and dimensions are as per drg.

Table dining 6 Per's (Drg No.FD/MAP-II/03) : (a) The overall size of the table shall be 1500x900x760mm The table top shall be of 18mm thick pre-laminated Particle board exterior grade conforming IS-12823=1990 to Grade I Exterior quality & type-Il (PLMDF-12 Designation) as per IS:14587:1998 (Reaffirmed 2003) (c) All woodwork shall be of 1st class teakwood of specie Tectona Grandis conforming to IS-1331:1971 free from dead knots and moisture content as permissible as per IS-287 (d) 6mm thick TW lipping shall be provided on all the exposed edges of MDF Duly treated with French polish as specified. (f) Powder coated MS angular plates each of 150mmx30mmx5mm thick shall be screwed to the legs at right angles with long rails and short rails. (g) Hard nylon shoes/buffers shall be provided to each leg bottom.