Military Engineer Services Tender

25mm bore

40mm bore

50mm bore

80mm bore

100mm bore

150mm bore

Supply and fix galvanized steel water tubing medium grade with all new fittings laid in walls, ceiling or floors in new or old aligment complete all as specified for the following bore of pipe:- Make: Surya Roshni ltd/ Tata/ Jindal Steel/ Prakash/ Bansal/ Zenith/ Nezone Tubes Ltd

15mm bore

20mm bore

25mm bore

40mm bore

50mm bore

80mm bore

100mm bore

Supply, Laying, jointing & testing of Ductile iron (DI), pressure pipes Centrifugally Cast (Spun) Ductile Iron Pressure Pipes with Spigot & Socket end, Class K-7 conforming to IS: 8329/2000 (latest revision) -blast furnace slag cement with Portland cement properties suitable for (push-on) rubber gasket jointing with inside cement mortar lining and Black bitumen external coating, duly ISI marked suitable for push on joint(rubber gasket joint) in any length with inside cement mortar lining, laid in trenches for follwing bore of pipe :- Make: Tata Metaliks/ Electrosteel Casting Ltd./ Jindal Saw Ltd. Note:- (i) Excavation & Earthwork, shall be measured and paid separately. (ii) The quoted rate shall deemed to include for provision of joints and jointing material for laying pipes and for jointing pipe fittings or taking branch connection, provision of joints and jointing material shall be measured and paid separately.

100mm bore

150mm bore

Taking out sluice valve refacing, regrinding and refixing of following size:

80mm dia

100mm dia

150mm bore

Supply and fix CI Sluice valve PN-1.6 IS 14846-2000 with Spindle Iron (Heavy duty) Wheel head and both ends flanged and MS nut bolts and washers and pair of rubber/fiber gasket and fixed in position for following sizes:- Make:-Zoloto/Kirloskar/ Leader

80mm bore

100mm bore

150mm bore

Supply and fix as in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed for following sizes all as specified and directed :- Make: Audco(L&T)/ Zoloto/ Kirloskar/ Leader/ Upadhyaya

15mm bore

20mm bore

25mm bore

40mm bore

50mm bore

Dismantling old valve pit chamber of following dimension and construct existing size with double brick wall masonry in cement mortar 1:4, 15 mm thick rendering with cement mortar 1:4 including WPC and base platform with PCC 1:2:4 type B2 using 40 mm graded crushed stone aggregates with 3 mm thick MS sheet as top cover mounted on angle iron frame with hinges and necessary locking arrangement duly painted with two coats of synthetic enamel paint over a coat of red oxide primer including necessary earthwork, filling and removing complete all as directed by Engineer-In-Charge.

900 mm x 900 mm x 900 mm

Supply and fix as in repairs 3 mm thick MS sheet as valve pit top cover for 900 mm x 900 mm valve pit chamber mounted on angle iron frame with hinges and necessary locking arrangement duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep in soft / loose soil for removing old and laying new pipes , complete all as specified and directed at site.

Returning, filling in, excavated soil including leveling, watering and well ramming in layers of thickness not exceeding 25 cm in each layer complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing the soil where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.