Military Engineer Services Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Military Engineer Services - MES Tender
Eprocure
Opening Date22 Jun 2024
Closing Date20 Jul 2024
Tender Amount₹ 41,72,000
Costs
EMD
₹ 83,440Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_661399_1Bid Award Id
ViewTender No
GE(MCTE)/MHOW/31(T) OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar
32.4
-
-
... More
Dismantling mild steel work of any description from any position and height as directed and specified.
4
-
-
... More
Dismantling Asbestos cement (corrugated, semicorrugated etc), sheets in roof covering from any position as directed as specified.
450
-
-
... More
Dismantling wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs complete all as specified
300
-
-
... More
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specified complete all as directed.
3
-
-
... More
Resecuring or easing and adjusting door shutters of size exc 1 sq m and not exc 2 sq m each of any description without taking down shutter from frame complete all as directed.
8
-
-
... More
Dismantling boarding of any description fixed in any position with screws. complete all as directed.
25
-
-
... More
Demolition of stone, brick masonry built in cement mortar incl quoins, arches, etc but exceeding ashlar facing dressed stone Work etc.complete all as directed.
12
-
-
... More
M&L for brick work with old sized fly ash bricks built in CM 1:6 in straight or curved on plan exceeding 6m mean radius complete all as specified and directed.
12
-
-
... More
S&F Solid single PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, edges will be painted to match with prelam sheet suppling & fixing in opening as per specification & drawing including all fixtures shown on drawing on SSR Part-II complete all as specified and as directed.
60
-
-
... More
S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; stile &rails having one side feathered edge and on other side 10mm 90^0 bent edge,Paneling of 2mm thick prelam PVC sheet on bothfaces i.e front face & back face with particle board core to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement,and including all hardware necessary for a door supplying & fixing in the frame at site as per specification & drawing.given on SSR 2020 complete all as specified and as directed.
21
-
-
... More
S&F Pressed steel door frame for single door, size 105mm x 60mm x 1.25mm thick with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfast (size 25mm x 3mm) of length 30 cm) etc., including Cutting holes in brick walls built in cement mortor for inserting holdfasts and making good dismantled portion in cement mortor 1:3 or including cement concrete 1:2:4 Type B-1, depth of embedded portion of holdfasts exc. Half brick but not exc. One brick from the face of the jamb intl the wall complete all as specified and as directed.
150
-
-
... More
S&F Pressed steel door frame for single door, size 125mm x 65mm x 1.25mm thick with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfasts (size 25mm x 3mm) of length 30 cm) etc., including Cutting holes in brick walls built in cement mortor for inserting holdfasts and making good dismantled portion in cement mortor 1:3 or including cement concrete 1:2:4 Type B-1, depth of embedded portion of holdfasts exc. Half brick but not exc. One brick from the face of the jamb intl the wall complete all as specified and as directed.complete all as specified and as directed.
35
-
-
... More
S&F Factory made, 35mm thick 2nd class hard wood, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35mm thick complete, all as specified and as directed.
67
-
-
... More
S&F Factory made, 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass/ gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I section 8.20 (a), all as specified and directed.
31
-
-
... More
S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; complete all as specified and directed.
62
-
-
... More
M&L for PCC 1:3:6 Type C1(20mm graded aggregate) as in bed block for holdfast and filling door frame complete all as specified and directed.
0.3
-
-
... More
S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.
8
-
-
... More
S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.
48
-
-
... More
S&F 250mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.
6
-
-
... More
S&F 100mm stainless steel Butt hinges for doors and shutters, complete door etc complete all as directed.
56
-
-
... More
S&F aluminium anodised barrel tower bolts of extruded section with 100mm long bolt, complete all as directed.
6
-
-
... More
S&F aluminium anodised barrel tower bolts of extruded section with 200mm long bolt, complete all as directed.
58
-
-
... More
S&F aluminium anodised barrel tower bolts of extruded section with 150mm long bolt, complete all as directed.
8
-
-
... More
S&F Extruded aluminium alloy handles fabricated type anodised 150mm size complete all as directed.
96
-
-
... More
S&F Extruded aluminium alloy handles fabricated type anodised 100mm size complete all as directed.
12
-
-
... More
M&L for floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, 140mm long, fixed in floor complete all as directed.
10
-
-
... More
S&F hasp and staple 125mm, safety type, aluminium anodised with alu hinge pin incl bolt to hinge plate and fixed with screws all as specified and as directed.
4
-
-
... More
S&F 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as directed.
10
-
-
... More
M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of filler coat with grey filler or liquid wood filler, transparent, and bringing forward surfaces to smooth even finish, complete all as directed.
220
-
-
... More
M&L for stainless steel wire cloth, 0.71mm nominal dia of wire and average width of aperture 1.20mm and fixed with tinned tacks, or stainless steel wire staples complete as all as specified and as directed.
33
-
-
... More
S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be two part as upper part shall be three movable shutter and lower part consist three shutter (one open able in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jambs of windows by plastering in CM 1: 3 even and smooth complete etc. shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge.
(i) Windows frame of cross section 101mm x 44mm x 1.5mm thick.
(ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.
(iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.
(iv) 4 mm thick glass superior quality.
(v) IDPE Rubber gasket for fixing of glass.
(vi) Locking cleats per shutter -01 Nos.
(vii) Sliding rollers per shutter - 02 Nos.
(viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.
(Ix) fixing screw for frame with wall per windows- 08 Nos.
20
-
-
... More
S & F powder coated aluminium ventilator cross section conforming to IS 63.5 x 38.10 x 1.5mm consisting of two portions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jambs all around in CM 1:3 finishing even and smooth complete all as specified and directed.
4
-
-
... More
S&F decorative curtain rod 25 dia with decorative head on both end of rod and necessary clamps/ fixing brackets, stops, rollers etc complete all as specified and as directed.
113
-
-
... More
Demolition of cement concrete (including floor tiles, kota stone flooring etc) (un-reinforced) of any description and in any position not otherwise specifically provided for incl removal the demolised materials to a distance exc 50 mtr and not exc 100 mtr complete all as directed.
5
-
-
... More
M & L for 75mm thick cement concrete 1:3:6, type C1, with using 20 mm graded stone aggregate in floor/plinth protection, finish the surface even and smooth without using extra cement including forming constructions joints with the mixture of bitumen & sand in CM (1:3) by weight and filling the same with bitumen filler complete all as directed.
135
-
-
... More
M&L for forming construction dummy joints 65mm deep x 10mm wide filled with Grade B sealing compound complete all as specified and directed.
30
-
-
... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles.
355
-
-
... More
M&L for scratch free, doubly charged, vitrified ceramic tiles 10 to 12mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
200
-
-
... More
M&L for Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.
90
-
-
... More
M&L for Glazed Coloured ceramic tiles (textured and designed as required) in vertical surfaces size 450mm x 300mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat in CM 1:3 complete all as specified and as directed.
110
-
-
... More
M&L for joint free coloured glazed ceramic tiles (colour as approved laid in pattern as approved by GE )size 300mm x 450mm x 7mm thick on vertical surfaces such as dados and risers to step etc, set and jointed in neat cement slurry and pointed in coloured cement to match the tiles including 10mm thick rendering in CM 1:4.
170
-
-
... More
M&L for PCC (1:4:8), type D-2, using 40mm graded crushed stone aggraegate as in sub base filling mass concrete etc complete all as specified and directed.
22
-
-
... More
M&L for 300mm x 300mm x 10mm thick high traffic paver tiles (coloured) joint free as in floors and jointed with neat cement slurry and pointed in white/ coloured cement to match the surface laid over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.
150
-
-
... More
M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/ rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
24
-
-
... More
M&L for Machine cut mirror polished kota stone slab flooring with rounded edge 18-20mm thick over & including cement screed bed (1:6) 15mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.
100
-
-
... More
M&L for Cutting and mirror polishing of existing kota stone flooring
180
-
-
... More
Rounding to edges of stone slab one edge such as in steps,cooking platform, and other similar situation complete all as specified and directed.
15
-
-
... More
Taking down old GI tubing ISI marked medium grade 15mm bore with all fittings including connection etc, complete all as specified and directed.
100
-
-
... More
Taking down old GI tubing ISI marked medium grade 20mm bore with all fittings including connection etc, complete all as specified and directed.
45
-
-
... More
Taking down old GI tubing ISI marked medium grade 25mm bore with all fittings including connection etc, complete all as specified and directed.
20
-
-
... More
S&F 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.
60
-
-
... More
S&F 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.
40
-
-
... More
S&F 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and as directed.
50
-
-
... More
M&L for Cutting chases for concealed water tubing in brick wall and making good in CM 1:3 cutting n.exc 10cm girth.complete all directed.
125
-
-
... More
S&F in repairs incl hoisting HDPE plastic water cylindrical vertical type tanks closed top of capacity 500Ltrs incl 20mm bore brass stop cock and 20mm bore brass float valve with polythene float including taking down the old one to store complete all as specified.
6
-
-
... More
M&L for 25mm dia Ball Brass valves high pressure with polythene float and fynut complete screwed for iron pipe or brass ferrule and fixed complete all as directed.
6
-
-
... More
S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm and including waste pipe complete all as directed.
7
-
-
... More
S&F of 20mm bore HDPE pipe of pressure 6 kgf/ Sqcm, with all fittings and fixed complete to walls and ceilings or laid in floors.
25
-
-
... More
S&F of 15mm bore HDPE pipe of pressure 6 kgf/ Sqcm, with all fittings and fixed complete to walls and ceilings or laid in floors.
75
-
-
... More
S & F in repair vitreous china water closet Rimless One piece EWC with slim soft close seat cover 660 x 350 x 745mm Concealed S or P Trap for better aesthetics Snow White - Whiter than the whitest complete all as specified & directed by Engr-in-charge. Make : Cera Cat Part No S1013230 or equivalent approved.
4
-
-
... More
S&F in repairs table top basin, of size 515mm x 415mm x 145mm fixed complete incl CP waste coupling, waste pipe, PVC connection for hot & cold all as specified and as directed. Make : Cera Cat Part No S2020171 or equivalent approved.
4
-
-
... More
S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including provisioning of lime concrete bedding complete all as specified and as directed
6
-
-
... More
S&F PVC valveless, 10 ltr capacity syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.
6
-
-
... More
S & F in repairs PVC (SWR) Floor trap/ Nahani trap plain or multi with stainless steel grating incl joinig to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and directed.
22
-
-
... More
S & F in repairs 110mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed.
50
-
-
... More
S & F in repair 110mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as directed.
14
-
-
... More
S & F in repair 110mm bore PVC (SWR) vent cowl complete all as directed.
10
-
-
... More
S & F in repair 75mm bore PVC (SWR) vent cowl complete all as directed.
4
-
-
... More
S & F in repair 110mm bore PVC (SWR) bend any radius complete all as directed.
16
-
-
... More
S & F in repair 110mm bore PVC (SWR) bend with acess door complete all as directed.
6
-
-
... More
S & F in repairs 75mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as directed.
34
-
-
... More
S & F in repair 75mm bore PVC (SWR) bend any radius complete all as directed.
10
-
-
... More
S & F in repair 75mm bore PVC (SWR) bend with acess door complete all as specified and directed.
8
-
-
... More
S & F in repair 75mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.
8
-
-
... More
Dismantling of cast iron/ PVC pipes jointed in cement mortar 110 / 75mm bore all as specified and directed.
30
-
-
... More
S&F 75mm bore PVC reducers PVC (SWR), complete all as directed.
6
-
-
... More
S&F110mm bore PVC reducers PVC (SWR), complete all as directed.
6
-
-
... More
S & F in repair bib taps fancy type, brass, chromium plated with crutch or butterfly handle, screwed down, screwed for 15mm bore GI pipe or for brass ferrule or to GI socket complete all as directed. Make : Cat Part No CON-037 KN of Jaquar or Equivalent approved by the GE.
20
-
-
... More
S & F in repairs Stop/angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle sewed both ends for iron pipe or for unions.complete all as directed. Make : Cat Part No COP-057PM of Jaquar or Equivalent approved by the GE.
20
-
-
... More
S & F in repairs two way Stop/ angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle sewed both ends for iron pipe or for unions. complete all as directed. Make : Cat Part No COP-057PM of Jaquar or Equivalent approved by the GE.
6
-
-
... More
S&F in repairs Health Faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with Rabbit Cleaning System, 1.25 m Long CP Flexible Tube & ABS Wall Hook. Make : Cat part No ALD-565 of Jaquar or Equivalent approved by the GE.
4
-
-
... More
S&F in repair CP toilet paper holder chromium plated complete all as specified and as directed. Make : Cart Part No CAN-1153 of Jaquar or Equivalent as approved by GE
4
-
-
... More
S&F 15 mm bore brass CP Wall mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed. Make : Cat Part No CON-273KUNPR OF Jaquar or equivalent as approved by GE.
4
-
-
... More
S&F in repairs chromium plated shower rose 125mm size with or without sievel joints, any size including fixing to steel pipe or union complete all as specified and as directed. Make : Cat Part No OHS-1667 of Jaquar or equivalent as approved by GE.
6
-
-
... More
S&F in repair chromium plated Central hole basin mixer with 450 mm braided connection pipe (without pop-up) screwed down for 15mm GI bore pipe complete all as specified and directed. Make : Cat Part No CON-167KNB of Jaquar or Equivalent as approved by GE.
4
-
-
... More
S&F Chromium plated jet for EWC with 1.00 Mtr long PVC pipe including necessary GI fitting as required like toe nipple etc complete all as specified and directed. Make : Jaquar or Equivalent as approved by GE.
4
-
-
... More
S&F in repairs soap dish glass, complete all as specified and directed. Make : Jaquar or Equivalent as approved by GE.
6
-
-
... More
S & F in repairs sheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete
4
-
-
... More
S&F in repair 600mm x 450mm size and 5.5mm thick looking mirror, beveled edge of selected quality glass with aluminium frame made of channel alround, mounted on 6mm thick commercial ply or AC building board, fitted to wooden plug with CP screws. complete all as specified and directed
8
-
-
... More
S&F in repair 20mm dia brass chromium plated tubular towel raised type, 60cm long between flanges, complete all as specified and as directed.
6
-
-
... More
S & F in repairs Flexible waste pipe for wash hand basin fitted to Wash Hand Basin incl all necessary brackets etc complete all as directed.
4
-
-
... More
S & F in repairs 32/40mm PVC downpipe for kitchen sink fitted to Kitchen Sink incl all necessary brackets etc complete all as directed.
4
-
-
... More
S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as directed.
32
-
-
... More
S&F in repair Waste coupling, 32mm dia, of PTMT (half or full threaded). (Minimum weight 32mm-45gms/40mm-60 gms) complete all as directed.
4
-
-
... More
S&F Grating 100mm dia of CP with or without hole complete all as specified and directed.
8
-
-
... More
S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm width with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.
8
-
-
... More
S&F in repair Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20mm bore and fixed in repairs, all as specified and directed.
10
-
-
... More
S&F bathroom mirror cabinet plastic body white coloured, wall mounted of size 47.40 x 37.60 x 19.20 cm, minimum wt 3.20 Kg, rectangular shaped complete all specified and as directed.
8
-
-
... More
S&F 18mm thick factory made PVC sheet one side pre laminated sheet kitchen cabinet shutter/ cupboard shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for making edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bodning etc complete all as directed.
35
-
-
... More
S&F factory made PVC shelf/ partition of required size consisting of panel of 12mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provide 3 edges in size 18mm x 18mm as per required length the front side of the edge visible in the fronth of the self/ partition to be edge lipped by 18mm width x 1mm thick PVC sheet of density 600kg/cum manufactured by ISO 9001-2015 Certified company using solvent cement etc complete all as directed.
30
-
-
... More
S&F stainless steel self closing hinges 75mm size for PVC door shutters complete all as specified and directed
40
-
-
... More
S&F modular type stainless steel basket size 20 x 19 x 8 inches and dia of wire not less than 3.00mm of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arrangement complete all as specified and directed.
2
-
-
... More
All as per item No.106 but basket size 20 x 19 x 6 inches complete all as specified and directed.
2
-
-
... More
S&F modular type stainless steel Perforated Sheet Cutlery Basket size 20 x 19 x 4 inches and dia of wire not less than 3.00mm of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arrangement complete all as specified and directed.
2
-
-
... More
M&L for stainless steel plate rack of size 900mm x 750mm x 250mm made up of 1mm thick stainless steel complete all as specified and directed.
6
-
-
... More
S&F in repairs 50 x 15mm size magnet door catcher for closing for Cupboard door shutter complete all as specified and directed.
16
-
-
... More
S& F 100mm size MS mat/ glossy finish handle complete all as directed.
23
-
-
... More
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc. complete all as directed.
650
-
-
... More
M&L for 15mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and smooth without using extra cement, complete all as directed.
300
-
-
... More
M&L for rendering 15mm thick in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement all as specified incl mixing with water proofing compound (WPC shall be measured and paid separately).
380
-
-
... More
M&L for 10mm thick cement plaster in cement mortar 1:3 on brick or concrete surface etc. on in ceiling finished even and smooth without using extra cement, complete all as directed.
100
-
-
... More
M&L for Complete Removal of Existing treatment on internal surfaces of walls including washing rubbing down and stopping of distempered and painted surfaces complete all as directed.
370
-
-
... More
M&L for preparation of new plastered surfaces of walls and provision of 1mm thick wall care putty and applying a coat of primer chalk whiting on new plastered surfaces of walls and applying two coats of oil emulsion distemper complete all as directed.
200
-
-
... More
M&L for Preparation of old plastered surface of walls and provision of 1mm thick wall care putty and applying a coat of primer chalk whiting on old plastered surfaces including two coats of oil emulsion distemper on wall surface complete all as specified and directed.
650
-
-
... More
M&L for Complete Removal of Existing tretment on ceiling surfaces including washing rubbing down and stopping of distempered and painted surfaces complete all as specified and as directed.
300
-
-
... More
M&L for preparation of old plastered surfaces of ceiling and provision of 1mm thick putty and applying chalk whiting primer on new plastered surfaces ceiling and applying two coats of oil emulsion distemper complete all as directed.
300
-
-
... More
M&L for Complete Removal of Existing tretment on External surfaces of walls including washing rubbing down and stopping of cement based painted surfaces complete all as directed.
350
-
-
... More
M&L for preparation of new plastered surface of wall and applying two coats of Anti fungal weather coat acrylic emulsion exterior paint over a coat of primer complete all as directed.
100
-
-
... More
M&L for preparation of old surface of wall and applying two coats of Anti fungal weather coat acrylic emulsion exterior paint complete all as directed.
450
-
-
... More
Supply only liquid water proofing compound.
20
-
-
... More
Demolition of reinforced cement concrete of any description and in any position not otherwise described comlplete all as specified and directed.
0.5
-
-
... More
M&L for mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
30
-
-
... More
M&L for RCC 1:2:4 type B1 (20mm graded aggregate) as in Chajjas & roof slabs complete all as specified and directed including necessary form work.
0.5
-
-
... More
M&L for taking down existing waterproof treatment of tar felt of any description from roof surface and removing rubbish to a distance not exec 100 mtrs complete all as specified and directed.
330
-
-
... More
M&L for PCC 25mm thick (1:2:4) type B0 using 12mm graded stone aggregate mixed with integral waterproof chemicals PIDI PROOF -LW mixed in proportion of 200ML/ 50KG cement of DR fixit of piddilite industries Ltd of STP No 1 (Liquid) of STP Ltd inproportion 200ML/50Kg cement as in padding on roof surface for correcting/ making proper slope on roof/ chajja and roof kerbs/ benching complete all as specified and directed.
330
-
-
... More
M & L for rendering 10mm thick in cement mortar 1:3 mixed with integral water proofing compound while concrete surface is green and finish the surface even and smooth without using extra cement all as specified and directed (WPC shall be measured and paid separately under respective item).
330
-
-
... More
M & L for preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete.
330
-
-
... More
M & L for applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat would be paid separately).
330
-
-
... More
M & L 3mm thick APP based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyester non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed and 10 years gaurantee & testing for leakproof complete. Note : Application of APP membrane must be done by authorized applicator of membrane manufacturer.
330
-
-
... More
M&L for applying two coats of bitumen based aluminium painting @ 0.15 Kg/ sqm each coat on water proofing treatment with preparation of surface as on non assessable area complete all as specified and directed.
330
-
-
... More
M&L for Cement concrete tiles 20cm x 20cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry as on roof surface with grey cement and pigments, and cut and polished etc incl 15mm thick cement plaster in CM 1:4, complete all as specified and as directed
330
-
-
... More
M&L for water proofing on roof/ parapert with the following steps and 10 years gaurantee & testing for leakproof complete:-
Step I : To clean the existing surface of the roof and making the surface dust free. Step II : Open the Crack more than 0.5mm the in V grove and filling with Epoxy mortar. Step III : Initial Coat (mixed 1/2 Ltr of water in 1 ltr of Roof seal of Asian Paint/Pidilite /STP/FOSROC/ACC/L&T/MARUTI Dr FIxit ) as a primer (area cover 1 litr = 9 to 10 sqm)
Step IV : After six hours of primer apply first coat (one coat) of Asian Paint/PIDILITE/STP/FOSROC/ACC/L&T/MARUTI Dr Fixit roof seal in a particular direction without mixing of water. Now leave it for six hours (area cover = 1 ltr = 1.2 sqm)
Step V : After six hours of first coat apply the second coat of Dr Fixit Roof seal in other direction without mixing of water (area cover 1 ltr = 1.2 sqm). Now leave it for 24 hrs complete all as specified and as directed Note : The work of waterproof treatment shall be got executed through expert team of manufacturers of authorised applicator of manufacture approved by the GE.
Make : Asian Paint/ Pidilite/ STP/ FOSROC/ ACC/ L&T/ MARUTI Dr Fixit.
30
-
-
... More
M&L for excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, getting out in hard/ dense soil complete all as specified.
10
-
-
... More
M&L for plain cement concrete type C-2 (1:3:6) 20mm graded aggregate in foundations, filling and mass concrete complete all as specified.
1.5
-
-
... More
S&F angle iron in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
120
-
-
... More
S&F Mild steel round bars 10mm dia Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
40
-
-
... More
S&F Mild steel screw bolts 5 to 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.
20
-
-
... More
M & L for framed work such as grills,gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work portions framed and hung as gates including pintle hinges stops hand made sliding bolts etc conforming to Fe.290.Gde-E-165 complete all as specified and directed.
550
-
-
... More
M & L for two coats of synthetic enamel paint over a coat of red oxide over newly untreated steel surfaces complete all as specified and directed.
245
-
-
... More
M & L for and fixing for 4mm dia galvanised steel wire 100mm x 100mm mesh, made up into mattresses or cages, lapped wired and laid in position including clossing after filling complete all as specified and directed.
80
-
-
... More
Providing and fixing pre painted steel sliding window Eco Series 3-Track, 2 glass panel and 1SS mesh panel sliding window including grill fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm. Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. Section for external frame should be of 107x44mm, Section for shutter should be of 35x49mm. Section of mesh should be of 35 x 49 mm.The windows should be paneled with 5mm thick plain float glass. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Diamine Monomer (EPDM).The sections are to be cut to length, joined and assembled by means of corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expanding screws, including supply and fixing of MS grill 10mm solid square bare @ 150mm centre to centre for horizontal direction and two 10mm solid square bar in vertical direction alongwith all round the frame using 30mm x 3mm MS flat with necessary welding and fixing anchorage and making good the adjacent sides of jambs of window i.e, plastering in CM 1:4 complete all as specified and directed.
Make : NCL or equivalent approved by the GE.
20
-
-
... More
Providing and fixing fixed Eco Series louvers fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 grams/ Sqm) including grills, with thickness of 0.58mm coated sections to be primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick, section for external frame 33 x 58mm, glass holding flanges made of polypropylene, sections are to be cut to length, mitre joined with corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expanding screws incl window glass 4mm thick & making good the adjscent sides of jambs of ventilators by plastering in CM (1:4) all as specified and directed by Engineer in charge. Make : NCL or equivalent as approved by GE.
4
-
-
... More
M&L for new plastered surfaces of wall, pillasters, cornices etc precoat treatment apply two coats of Anti fungal weather coat acrylic emulsion paint over a one coat of wall care acrylic putty and apply coat of primer (X2) complete all as specified and directed.
Note:- (a) Each stage i.e preparation of surfaces,application of primer, application of first coat. application of second coat will be got passed from Engr-in-Charge. (b) Written Gaurantee for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item.
230
-
-
... More
M&L for complete removal of old decorated plastered surfaces of wall, pillasters, cornices etc by brooming down or steel wire brushing scrapping down and washing with water after completion of precoat treatment apply two coats of Anti fungal weather coat acrylic emulsion paint over a one coat of wall care acrylic putty and apply coat of primer (X2) complete all as specified and directed. Note:- (a) Each stage i.e preparation of surfaces, application of primer,application of first coat. application of second coat will be got passed from Engr-in-Charge. (b) Written Gaurantee for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item.
190
-
-
... More
M&L for Preparation of Old painted surface of Wood of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed.
120
-
-
... More
M&L for Preparation of Old painted surface of Steel of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed.
80
-
-
... More
S&F in repairs vitreous china, white, wash hand basin, flat back size 550mm x 400mm 'including MS brackets including waste coupling, including cutting for and pinning in, including waste pipe complete all as specified and directed.
4
-
-
... More
S & F in repairs Pillar tap 15mm bore, cast copper alloy,with capstan heads, chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe complete all as directed.
4
-
-
... More
S & F in repairs stop valves 15mm bore, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed. complete all as directed.
16
-
-
... More
S & F in repairs Brass Chromium plated two way angle cock/ two way bib cock 15mm bore complete all as directed.
4
-
-
... More
S & F Brass chromium plated shower rose 125mm size with swivel joints, fixed in repairs complete.
4
-
-
... More
S & F in repairs Wall mixture CP hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.
4
-
-
... More
Dismantling water tanks and removing to store exc 250 & n. exc 1000 litres capacity complete all as directed.
4
-
-
... More
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc and hoisting if required and re-fixing in position exc 500 & n. exc 1000 litres capacity complete all as directed.
4
-
-
... More
S&F door spring with 300mm mild steel rat rail rod pattern of standard quality including roller and roller plate complete Helical spring) complete all as directed.
8
-
-
... More
Cutting holes in stone/ brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1;2:4 type B1 exceeding half brick but not exceeding one brick complete all as directed.
100
-
-
... More
S&F Mild Steel work with hollow MS tubular section square or rectangular section as rafter/ purlin including necessary welding bolting complete with using ERW or induction butt welded tubes confirming to relevant I.S. Fe 410 -W (GdeE- 250) qualityA complete all as specified and directed
400
-
-
... More
M & L for Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tesile strength of 550 Mpa as in roof covering to wall, fixed with self tapping screws complete all as directed.
410
-
-
... More
S & F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 1000 litres capacity.
4
-
-
... More
M &L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, and eves board fixed with self tapping screws as specified
40
-
-
... More
S&F true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm, having 0.25mm gauge at every 1200mm centre to centre maximum and rotary stitched cross tee of size 24 x 38 mm having 0.25 mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25 mm gauge at 1200 mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200mm c/c in both directions using 2.0mm thick pre-straightened GI wire. including ceiling tiles of approved make and specification, of size 600mm x 600mm x 6mm all as directed and specified.
300
-
-
... More
M&L for 75mm thick PCC, type D2 (1:4:8) using 40mm graded stone aggt in subbase complete all as directed.
40
-
-
... More
M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick set jointed and pointed with grey cement and no pigments in neat cement slurry in floor over & including 20mm thick screed bed (1:6) complete all as specified
20
-
-
... More
M&L for providing cement concrete Type B1 1:2:4 (20mm graded aggregate) as in coping. complete all as directed including necessary form work.
2
-
-
... More
S&F mild steel framed work such as framed and hung as gates ornamental and intricate design, including pintle hinges, stops, hand-made sliding bolts, etc grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work and similar works conforming to Fe-290 Gd E-165 complete all as specified and directed.
80
-
-
... More
M&L for Preparation of New surface of wall and applying two coats of distemper oil bound over chalk whiting priming coat complete all as specified and as directed.
150
-
-
... More
S&F in repair 20mm dia Ball valves, of PTMT high pressure, with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15 to 25mm to 142 - 455 gms)
4
-
-
... More
E/M WORK
-
-
-
... More
Taking down copper/ aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition separately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.
232
-
-
... More
Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M No-III Mhow complete all as directed.
14
-
-
... More
Taking down existing celing fan/ Exhaust fan and refixing the same with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc and writting the MES Number with synthetic enamel paint complete all as directed.
8
-
-
... More
Taking down carefully copper/ aluminium Sub main wiring of any size from surface/ concealed/ existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as directed.
300
-
-
... More
Taking down existing geyser any size in position and re-fixing the same after B/R work including painting of the same with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, with and including providing three core flexible copper cable for connection from ceiling rose/ connector complete all as specified and directed by Engr-in-Charge.
2
-
-
... More
Taking down existing geyser of any capacity after disconnecting all necessary electrical and water supply connections and deposit to MES store yard of AGE E/M No-III Mhow complete all as specified and as directed.
4
-
-
... More
Taking down existing single phase electric energy meter of any capacity after disconnecting all necessary electrical connections and deposit to MES store yard of AGE E/M No-III Mhow complete all as directed.
6
-
-
... More
Taking down old/ unserviceable distribution board by disconnection of electric connection carefully SPN DBs/ TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as directed.
12
-
-
... More
M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2mm thick, 60mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-
-
-
-
... More
(a) One light point controlled by one, one way switch 5 Amps complete all as directed.
132
-
-
... More
(b) One light point controlled by two, two way switch 5 Amps complete all as directed.
4
-
-
... More
(c) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator, complete all as directed.
14
-
-
... More
(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the SAME BOARD complete all as directed.
24
-
-
... More
(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. complete all as directed.
28
-
-
... More
(f) One bell point controlled by one, bell switch 5 Amps complete all as directed.
2
-
-
... More
All as per item No182 here in before but using 2.5 sqmm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sqmm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.
24
-
-
... More
All as per item No.182 here in before but using 4.0 sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sqmm PVC insulated copper conductor FRLSH cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC Point)
4
-
-
... More
S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.
198
-
-
... More
S & F for Modular Switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified.
8
-
-
... More
S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.
24
-
-
... More
S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.
52
-
-
... More
S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.
24
-
-
... More
S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.
16
-
-
... More
S & F for lamp holder, PVC/ Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed.
29
-
-
... More
S & F for for Bell push modular 6 Amps single module complete all as specified.
6
-
-
... More
S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified.
47
-
-
... More
S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and directed.
6
-
-
... More
M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 4 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 4.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 4 Sqmm cable, one run of 4.00 Sqmm cable and one run of PVC conduit will be measured as one unit, complete all as directed.
120
-
-
... More
M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 4.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 4 sqmm cable and one run of PVC conduit will be measured as one unit
180
-
-
... More
S & F for Highly efficient LED Bulbs, 10 watts in B-22 cap complete all as specified and directed.
29
-
-
... More
Supply and fixing Inverter LED batten 20 watt with square profile and polycarbonate channel. Lithium lon battery with charging time 8 hours 10 hours and back up time upto 4 hours. with extruded environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories all as specified and directed.
48
-
-
... More
S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 10 watts complete all as specified and as directed.
8
-
-
... More
S & F for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make : Bajaj Cat Part No BCLSB 10 NW or its equivallent model in Wipro, Philips.
4
-
-
... More
S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed.
4
-
-
... More
S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge.
4
-
-
... More
S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.
2
-
-
... More
S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.
8
-
-
... More
S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed.
12
-
-
... More
S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed.
48
-
-
... More
M&L for single pole and earth encolsure with a two pin and earth plug with socket 240 Volts, 50 Hz, used for AC complete with one single pole MCB SP 20 Amps complete all as specified and directed.
4
-
-
... More
S & F for Modular type TV Socket out let. complete all as specified and directed.
2
-
-
... More
S & F for Modular typeTelephone socket outlet complete all as specified and direced.
2
-
-
... More
S & F for Modular type RJ 45 with shutter complete all as specified and as directed.
2
-
-
... More
S&F ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor. with all connected accessories and electrical connections from ceiling rose to fan teriminal including writting the MES Number with synthetic enamel paint including remote with battry complete all as specified and directed.
5
-
-
... More
S & F for water heater storage type (Geyser) vertical/ Horizental type as per site requirement with inner container of capacity 25 ltrs, electrically operated, AC 230 Volts,BEE 5 star rated, ISI marked including 04 Nos of hold fashner nuts required suitable size fixed in brick wall, PVC connection pipe hot & cold for Officers JCO's and OR Md Accn including writting the MES Number with synthetic enamel paint complete all as specied and directed.
1
-
-
... More
S & F for energy efficient exhaust fan of 230/ 300mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base including writting the MES Number with synthetic enamel paint compelte all as specified and directed. Note:- Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).
6
-
-
... More
S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20mm dia for LAN, telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed.
28
-
-
... More
M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate No 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note:- GI earth wire 4mm dia and 15mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.
4
-
-
... More
Labour only for refixing the (Geyser) vertical/ Horizental type obtained from item No.179 above with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 2.5/ 4 Sqmm up to 2 m from geyser bottam to 16 Amps socket with 16 Amps plug top including over hauling the geyser and painting of complete with two coars synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc and writting the MES Number with synthetic enamel paint complete all as specified and directed.
2
-
-
... More
Labour only for refixing the Ceiling fan/ Exhaust fan obtained from item No.175 above with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fan complete with two coars synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc and writting the MES Number with synthetic enamel paint complete all as specified and directed.
10
-
-
... More
Sppply & Laying XLPE insulated, armoured, electric cable of size 35 sqmm 3.5 core with aluminium conductor, 1100 volts grade, laid in trenches, fixed on poles/ walls or passing through pipes including provision of necessary lugs and glands & making necessary connection including taking down old unservicable cable of any core complete all as specified and directed,
40
-
-
... More
Excavating in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc and getting out in any type of soil complete all as specified and directed.
17
-
-
... More
Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.
8
-
-
... More
Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
10
-
-
... More
Supply laying and jointing GI pipe 'light grade' 40mm bore in trenches/under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.
16
-
-
... More
M & L for clean and dry sand (un washed) in trenches incl spreading and levelling for cushioning of UG cable complete all specified and directed. (Note : Punned thickness shall be measured)
5.27
-
-
... More
M & L for brick size sub class ‘B’ (modular size), laid flat in trenches for protection of cable complete all as specified and directed.
0.77
-
-
... More
Supply and fix in repairs LED tube light fittings 1 x 9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of pvc square boxes complete all as specified and directed.
4
-
-
... More
S&F Surface/ Recessed mounted LED panel 18 W, slim, compact Square LED panel of 18 W plastic body with premium diffuser to ensure glare free & even distribution of light complete.
16
-
-
... More
Supply & fix LED Bulk Head luminaire 13.5 W, pressure die cast housing with IP65 protection complete with electric connection & all necessary fixing arrangement complete all as directed.
4
-
-
... More
S&F (in building peripheri) energy efficient, LED 30 Watt Street light with best class design & Robust heat sink along with class leading IP, IK, & surge protection goe Long lasting performance complete with Connecting wire and provision of GI bracket, clamp, nuts, bolts grounded in wall incl all fixing arrangement complete all as directed.
3
-
-
... More
Supply and Fix in repairs flush mounting factory made Vertical FP DB, IP-43 Protection -IK 09 with metal double door with 200 Amps rated copper busbar with 2 neutral bar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing with provision of sapce for 100-125 Amps MCCB as incomer and SPN/TP MCBs as out going, 4 way (Optium 1+12 Module) and provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as directed.
1
-
-
... More
Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of 63 Amps 4 pole and current carrying capacity in the DB complete withconnection testing and commissioning, complete all as directed.
2
-
-
... More
Sppply & Laying XLPE insulated, armoured, electric cable of size 16 sqmm 4 core with aluminium conductor, 1100 volts grade, laid in trenches, fixed on poles/ walls or passing through pipes including provision of necessary lugs and glands & making necessary connection including taking down old unservicable cable of any core complete all as specified and directed, for the following.
40
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements