Military Engineer Services Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Military Engineer Services - MES Tender
Civil And Construction
Eprocure
Opening Date2 Oct 2024
Closing Date30 Nov 2024
Tender Amount₹ 3,83,48,000
Costs
EMD
₹ 4,59,000Document Cost
₹ 2,000Tender Fee
Refer Documents
Summary
752942a Provn Of Auditorium For Stn Units Less Cat A Cmm And 1stc With 600 Seating Capacity At Jabalpur Mil Stn
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_676098_1Tender No
752942 A PROVN OF AUDITORIUM FOR STN UNITS LESS CAT A (CMM) AND 1STC WITH 600 SEATING CAPACITY JBLTender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Item No. 03 : PET PANEL PANELING IN BETWEEN FABRIC PANELING Supply Installation Testing and Commissioning Pet panels with acoustical properties made of 100 % polyster fibre with thickness of 9 mm homogenieous material with so many color option as per the choice of the architect / person in charge of size 2440 mm x 1220 mm. Can be cut in to any size for E G like 600 mm x 600 mm 1200 mm x 600 mm etc. as per client requirement.NRC Value of the eccoboard will 0.6. should be weather ressitant with anti fungal properties. Thermal insulation should be easy to install with the help of water proof bostik / fevicol SR 505 Adhesive on the side walls of the auditorium using GI frame work of 48mm GI Studs using 0.55mm thick and stud channels at 610mm x 610mm, 0.5mm thick, fixed with MS angle cleats 1220x610mm centers to wall by using metal fasteners, backed with 24 SWG x 12.5mm GI Chicken Wire Mesh with air gap a minimum of 50mm on back side, as per detailed drawing. The frame work to befilled with 50 mm thick mikron insulation synthetic wool having the density of 1000 GSM to achieve the 1.0 NRC value Then 8 mm perforated board will be nailed on g.i frame.Finally 9mm thick pet panels will be pasted on 8 mm perforated Boiling Water Proof, FR is Born Tough HDF Board density is above 1000 kg/m3 Borer Proof and Termite proof board with the help of S.R
50
-
-
Item No. 04 : STAGE WALL PANELING Supply Installation Testing and Commissioning Pet panels on the stage walls using GI frame work of 48mm GI Studs using 0.55mm thick and stud channels at 610mm x 610mm, 0.5mm thick, fixed with MS angle cleats 1220x610mm centers to wall by using metal fasteners, backed with 24 SWG x 12.5mm GI Chicken Wire Mesh with air gap a minimum of 50mm on back side, as per detailed drawing. The frame work to befilled with 50 mm thick mikroninsulation synthetic wool having the density of 1000 GSM to achieve the 1.0 NRC value Then 8 mm perforated biolo board will be nailed on g.i frame. Finally 9mm thick pet panels will be paste on 8 mm perforated Boiling Water Proof, FR is Born Tough HDF Board density is above 1000 kg/m3 Borer Proof and Termite proof board with the help of S.R
225
-
-
Item No. 05 : PET PANEL CEILING Supply Installation Testing and Commissioning of Pet panels with acoustical properties made of 100 % polyster fibre with thickness of 9 mm homogenieous material with so many color option as per the choice of the architect / person in charge of size 2440 mm x 1220 mm. Can be cut in to any size for E G like 600 mm x 600 mm 1200 mm x 600 mm etc. as per client requirement.NRC Value of the pet panel will 0.6. should be weather ressitant with anti fungal properties. Thermal insulation should be easy to install with the help of water proof bostik / fevicol SR 505 Adhesive on the ceiling consisting of GI perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending GI intermediate channels of size 45mm (0.9mm thick with 2 flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angles of width 25mm x 10mm x 0.55mm thick fixed to soffit with GI cleats and steel expansion fasteners.
130
-
-
Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and in a direction perpendicular to the intermediate channel at 457mm c/c Then 8 mm perforated Boiling Water Proof, FR is Born Tough HDF Board density is above 1000 kg/m3 Borer Proof and Termite proof board will be nailed on the framework . finally 9 mm PET panels is then screw fixed to ceiling section with 25mm drywall screws at 230mm c/c. Screw fixing is done mechanically with drilling machine with suitable attachment The frame work to overlayed with 50 mm thick mikron insulation synthetic wool having the density of 1000 GSM to achieve the 1.0 NRC value
-
-
-
Item No. 06 : STRECHED FABRIC IN UPVC GRIPPER PANELING ON CEILING Supply Installation Testing and Commissioning of Acoustical Panels on ceiling consisting of GI perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending GI intermediate channels of size 45mm (0.9mm thick with 2 flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angles of width 25mm x 10mm x 0.55mm thick fixed to soffit with GI cleats and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and in a direction perpendicular to the intermediate channel at 457mm c/c
578
-
-
The frame work to overlayed with 50 mm thick mikron insulation synthetic wool having the density of 1000 GSM to achieve the 1.0 NRC value then. 8 mm perforated Boiling Water Proof, FR is Born Tough HDF Board density is above 1000 kg/m3 Borer Proof and Termite proof board will screw fixed to ceiling section with 25mm drywall screws at 230mm c/c. Screw fixing is done mechanically with drilling machine with suitable attachment. Finally 10 mm gripper will be fixed on 8 mm perforated Boiling Water Proof, FR is Born Tough HDF Board density is above 1000 kg/m3 Borer Proof and Termite proof board the help of screws finally streched fabric will tucked into the gripper strips teeth and a tool stretch it tightly before fastening. this creates a smooth wrinkle free surface
-
-
-
Item No. 07 : STAGE GRID CEILING Supply Installation Testing and Commissioning of Stage false ceiling of 9 mm polyster fiber board with homogenieous material with so many color option as per the choice of the architect / person in charge of size 2440 mm x 1220 mm. Can be cut in to any size for E G like 600 mm x 600 mm 1200 mm x 600 mm etc. as per client requirement.NRC Value of the pet panel will 0.6. should be weather ressitant with anti fungal properties laid over MS Suspension Grid consisting of 2 nos 40 X 40X 5mm MS Angles, welded back to back @1200mm c/c & M.S. Tees @ 600mm c/c .
110
-
-
Building including internal services (Acoustic Door)
-
-
-
Item No. 08 : ACOUSTIC DOOR Supply Installation Testing and Commissioning of Systems Double leaf Wooden Acoustic Fire Door, 55mm thick, STC 45. with the Acoustic Property and 2 Hours Fire rated As per confirming IS :3614(Part-II) & BS:476 (Part 20&22) Department of Industries and Commerce, Haryana. Acoustic Fire Door having infill of Rockwool 64kg/ M3 density, Sandwiched between Two Calcium Silicate Boards without asbestos, Brucite and Meerschaum having a density not more than 1150kg/ M3 and Fire rated Ply both side with heat activated intumescent fire seal strip of size 10x4mm and EPDM Gaskets around the frame are used to enhance acoustic properties. 1mm thick Mica laminates facing on both sides in desired shade and colour. Hard Wood Door frame size is 125x90mm with double rebate. Door Hardware Provision as per choice of Architect/client's approval. All are complete as per Architect's/ Clients approval . Cost of Door Hardware like Brass Door closer of suitable specification for heavy door are inclusive in the quoted rates for all doors (approx qty 12 Nos door).
50
-
-
Item No. 09 : S & F of Stainless Steel Grade 304 Handle 600mm long, fancy type, of any colour (as approved by PMG) heavy duty complete all as specified and directed
48
-
-
Item No. 10 : S & F of Stainless Steel Grade 304 SS Hinges 125 mm, heavy duty complete all as specified and directed.
96
-
-
Item No. 11 : S & F of Stainless Steel Grade 304 Tower Bolt 450 mm long, complete all as specified and directed.
36
-
-
Item No. 12 : S & F of Stainless Steel Grade 304 Dead Lock and automatic drop down seal are inclusive in the quoted rates for all doors (approx qty 12 Nos door) complete all as specified and as directed.
12
-
-
Fixing and Lifting Arrangement of Stage Curtings
-
-
-
Item No. 13 : Supply Installation Testing and Commissioning of MAIN CURTAIN horizontal sliding arrangement complete with fixing rails, brackets, sliding arrangement & motorized operation complete with runners, master runners, pullies, 3mm steel wire rope, 1 HP motor (Crompton) 2nos., Air breaker contactors (L&T/SIEMENS), 2nos. micro switches for auto stop, 3 nos push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900mm and should be stitched in double gathering Mechanism (Fabric made out of velvet curtain 300 to 400 GSM cloth with Fabric)
1
-
-
Item No. 14 : Supply Installation Testing and Commissioning of REAR/MIDDLE CURTAIN - horizontal sliding arrangement complete with fixing rails, brackets, sliding arrangement & motorized operation complete with runners, master runners, pullies, 3mm steel wire rope, 1 HP motor (Crompton) 2nos., Air breaker contactors (L&T/SIEMENS), 2nos. micro switches for auto stop, 3 nos push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900mm and should be stitched in double gathering Fbric (Fabric made out of velvet curtain 300 to 400 GSM cloth with Fabric)
2
-
-
Item No. 15 : Supply Installation Testing and Commissioning of WINGS :- Supply Installation testing and commissioning of velvet cloth 300 to 400 GSM black fabric as per approved sample fixed over the metal framework metal framework made out of 50 x 50 mm square MS pipe (medium grade) specification complete. Note : Measurement will be made for external dimensions including heading for payment Fabric
6
-
-
Item No. 16 : Supply Installation Testing and Commissioning of FRILLS :-Supply Installation testing and commissioning of frills in double gathering box pleats stiched out of 300 to 400 GSM valvet fabric,The frill to be fixed from the suspension grid with 38 mm dia B class ms pipe suitably hung by mean of 35x4mm MS flat. The pipe & flat to be painted with black enamel paint .
5
-
-
Arboriculture
-
-
-
Item No. 17 : Excavating / Digging out pits of suitable size (but dia not less than 400 mm and depth not less than 500 mm) each pit not exc 0.50 Cum in soft/loose of soil, manually or with using augar/pickxe including removing excavated soil to a distance not exc 50 m and making good the surfaces complete all as specified and directed.
260
-
-
Item No. 18 : Supply only approved each mixed with suitable as well as suffcient manure & chloropyriophos complete all as directed and specified.
260
-
-
Item No. 19 : Supplying and planting of following season flowering healthy plant/sapling of fully young 1 year aged of specified minimum 1 m height in the pits, refiling the pits with prepared mix of earth duly mixed with suitable manure & chlorpyriophos etc in the suitable proportions as complete all as specified and directed.
30
-
-
(a) Rose
30
-
-
(b) Bougainvine cwarf mix colour hybrid
30
-
-
(c) Hibiscus
15
-
-
(d) Plumeria champa
15
-
-
(e) areca palm
10
-
-
(f) bottlel palm
15
-
-
(g) Foxtail palm
15
-
-
(h) Adanium palm
20
-
-
NOTE: (a) Rate for digging for plantation for plant/sapling will be measured and paid seperately
(b) Rate for approved earth mixed with suitable manure will be measured and paid seperately
-
-
-
Item No. 20 : Supplying and planting of following seasonal ornamental trees healthy plants of 2 year aged of specified minimum 1.5 m height in the pits, refiling the pits with prepared mix of earth duly mixed with suitable manure & chlorpyriophos etc in the suitable proportions as complete all as specified and directed.
-
-
-
(a) Michelia champa 1.20 mtr minimum height
10
-
-
(b) Night bluming jasmine
25
-
-
(c) Ficus banjaminia
5
-
-
(d) Amal Tar
5
-
-
(e) Tabebuja Roses (savana oka)
5
-
-
(f) Tubebuia avelianedas (pink trumpet)
5
-
-
(g) Cassia fistula (golden shower tree)
5
-
-
NOTE: (a) Rate for digging for plantation for plant/sapling will be measured and paid seperately
(b) Rate for approved earth mixed with suitable manure will be measured and paid seperately
-
-
-
Item No. 21 : Supplying and planting of following fruits trees healthy plants of 2-3 year aged of specified minium 1.5 m height in the pits, refiling the pits with prepared mix of earth duly mixed with suitable manure & chlorpyriophos etc in the suitable proportions as complete all as specified and directed.
-
-
-
(a) Mango 3 year agred (MIYAZAKI, RED PALMER, MALLIKA, ALPHANSO)
20
-
-
(b) Water Apply 3 year agred (dalhari, Bell chamba)
5
-
-
(c) Jamun 3 year agred
5
-
-
(d) Sapota (cricket ball)
5
-
-
(e) Guava 2 year agred (VNR, L49, Red diamond)
15
-
-
NOTE: (a) Rate for digging for plantation for plant/sapling will be measured and paid seperately
(b) Rate for approved earth mixed with suitable manure will be measured and paid seperately
-
-
-
Item No. 22 : Supply & planting of shrubs/hedges in double row at desired distances of suitable shurbs like durantla, laisa and aclipha (Min height 25 cms) one the prepared formation around the peripheri of the area complete incl necessary trenching to plantation all as specified and directed.
Note: (a) Rate for laying of approved earth in including in the items.
(b) Rate for approved earth mixed with suitable manure will be measured & paid seperately.
200
-
-
Item No. 23 : Supply & planting of grass readymade like carpet or selected no 1 by dibbing root method on layed approved earth mixed with manure including necessary trenching complete all as specified and directed.
Note: (a) Rate for laying of approved earth in including in the items.
(b) Rate for approved earth mixed with suitable manure will be measured & paid seperately.
500
-
-
Item No. 24 : Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia of pipe is 15 mm complete all as specified and directed.
1
-
-
Item No. 25 : Supply and Fixing of 20 mm GI tubes 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
20
-
-
Item No. 26 : Supply and Fixing of 15 mm GI tubes 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
20
-
-
Item No. 27 : S&F of bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
5
-
-
Item No. 28 : S&F of Gun-metal, globe or gate vlaves, 20 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
2
-
-
SCROLL WATER COLLED CHILLING MACHINE WITH MICRO-PROCESSOR BASED CONTROL PANEL
-
-
-
Item No. 29 : Supply Installation, testing and commissioning of Scroll Screw Water Chilling M/C of 70 TR ( Actual) capacity Conusming not more than 0.72 (IKW/TR ) at 100 % Load at below mentioned operating conditions with R410 A/R407C refrigerant, / semihermatic/ / hermatic sealed compressor, driven by suitable KW Sq. Cage induction motor complete with water cooled shell & tube condenser, insulated shell and tube flooded chiller, flow switches at condenser & chiller outlet, refrigerant piping, Refrigerant and Oil (First Charge), Microprocessor based control panel & accessories etc.( to be supplied by manufacturer of the chilling machine & Factory fitted ) all mounted on M.S. frame. Motor shall be suitable for 415 volts ± 10%, 50Hz ± 3 %, three phase A.C. supply.
-
-
-
Condenser CDW IN - 32.22º C./ 90.00 º F CDW OUT - 36.39º C /.97.50 º F
Chiller CHW IN - 12.22 º C / 54.00 º F CHW OUT - 6.66 º C / 44.00 º F
-
-
-
Insulation of the chilling machine shall be done by manufacturer only The chilling machine as described above shall be in line with specifications.
3
-
-
Item No. 30 : Supply, installation, testing & commissioning of End Section condenser water centrifugal pump sets with bronze impeller for condenser water recirculation complete with TEFC Sq. Cage induction motor with class "F" insulation, mechanical seal etc.conforming to technical specification & as per following parameters: (Company Assembled & Factory Fitted).
-
-
-
Condenser Water Pumps Capacity of each pump (LPM) 1059
Pump Head (Mt) 25.0
-
-
-
Proposed KW of Motor 7.5
3
-
-
Item No. 31 : Supply, installation, testing and commissioning of End section chilled water centrifugal pumpsets with bronze impeller for chilled water recirculation complete with TEFC Sq. Cage induction motor with class "F" insulation, mechanical seal etc. conforming to techinical specification and as per following parameters. The chilled water pumps shall include thermal insulation & cladding. (Company Assembled & Factory Fitted)
-
-
-
Primary Chilled Water Pumps Capacity of each pump (LPM) 635
Pump Head (Mt) 12.0
-
-
-
Proposed KW of Motor 2.2
3
-
-
Secondary Chilled Water Pumps
-
-
-
Item No. 31 : Supply, installation, testing and commissioning of End Secrtion Chilled water centrifugal pump sets with bronze impeller for chilled water recirculation complete with TEFC Sq. Cage induction motor with class "F" insulation, coupling guard, factory fitted mechanical seal etc. conforming to technical specification & as per following parameters.The chilled water pumps shall also include the cost of thermal insulation and aluminium cladding.Secondary chilled water pumps shall be suitable for operation on adjustable frequency drives & conforming to the specifications of variable speed pumping system (Company Assembled & Factory Fitted)
-
-
-
Variable Speed Pumping System
-
-
-
Item No. 32 : Supply, installation, testing and commissioning of Variable Speed Pumping system consisting of Three Numbers 3.7 KW adjustable frequency drive (AFD) ( Stand alone or integrated with motor for sensorless operations) suitably interfaced with other system components, hand / auto macro designed for pumping application, No. of dedicated microprocessor based pump logic controller, parallel pumping software duly downloaded, No. of Differential Pressure Sensor / Transmitters, interfacing amongst all components and compatibility of I/O signals etc complete with other accessories as required.
-
-
-
Capacity of Each Pump LPM 635 Pump Head (Mt) 36.0
-
-
-
Proposed KW of Motor 7.5
3
-
-
Item No. 33 : Supply, installation, testing and commissioning of FRP induced draft Cooling Tower of capacity 100 TR (Heat Rejection Capacity - 3,02,400 K Cal per hour.) complete with FRP water basin, PVC fillings, statically and dynamically balanced fan, TEFC motor, suction screen, make up & quick fill arrangement, over flow & drain connection, suitable steel ladder etc. and conforming to standard specification.
Inlet Water Temperature 37.50 °C
-
-
-
Outlet Water Temperature 32.00 °C
3
-
-
Item No. 34 : Supply installation , testing and commissioning of Closed loop expansion tank as per standards & requirements.The tank shall be made of mild steel and has a synthetic rubber membrane. Nitrogen gas or compressed air is filled in space between the membrane and the wall of the tank. The tank should be supplied complete with buster pumps (1W+1S), isolating valve, check valve, drain valve & pressure gauge. Before connecting the tank to water system, the gas pressure should be checked through the charging valve and adjusted according to the requirements, the control panel should also be included. The quoted price shall be inclusive of structural support for the tank. Capacity of tank i 300 lts+ Pumps with N+1 confirgration
1
-
-
Item No. 35 : Supply, installation, testing and commissioning of PN 10 rated Air Separator made out of MS Sheet as per Specification and Schematic diagram - 300 Ltrs.for Chilled water system
1
-
-
Double Skinned Celing Suspended Air Handling Units
-
-
-
Item No. 36 : Supply, installation,testing & commissioning of factory fabricated Double Skinned Chilled Water Air-handling unit Ceiling Suspended type fabricated out of extruded aluminium section with 0.8mm pre-plasticized/pre-coated Galvanised steel sheet outside & 0.8mm plain Galvanised steel sheet inside with blower,blower section & Blower shall be DIDW Forward Curved blade from & blower motor TEFC type suitable for operation on 415volts±10%,50 Hz± 5% AC supply, 4/6 Row cooling coil made of Aluminium finned Copper tube( thickness 0.50mm) with coil section,pre-filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%,polished stainless steel drain pan made out of 22Gsheet duly insulated complete with motor& belt drive package etc.without face & bypass dampers.The AHU panels shallbe insulated with40mm thick &38Kg/m³density PUfoam.The motor&blower assembly shallbe mounted on Aluminium extruded section only.The completeAHUshall conform to standard specification.The face velocity across cooling coil shall be limited to152MPM maxm.The capacity of Air-handlers shall be as follows:
-
-
-
The face velocity across cooling coil shall be limited to 152 MPM maxm.The capacity of Air-handlers shall be as follows:
(For AHU No. Please Refer Basic Of Design & AC Tender Drawing )
AHU Static Cooling Motor Coil Area Filter Cap. Pr. Coil Row KW SMT CFM mm of WC Deep
-
-
-
3500 30 mm 4 Row 2.2 0.65 Pre
2
-
-
7500 45 mm 4 Row 3.7 1.39 Pre
2
-
-
Double Skinned Floor Mounted Air Handling Units with Pre Filter
-
-
-
Item No. 37 : Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit horizontal type fabricated out of extruded aluminium section consisting with 0.8mm pre-plasticized/pre-coated Galvanised steel sheet outside & 0.8 mm plain alvanised steel sheet inside with blower, blower section and Blower shall be DIDW Forward / Backward Curved blade from and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row cooling coil made of Aluminium finned Copper tube ( thickness 0.50 mm) with coil section, pre - filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, polished stainless steel drain pan made out of 18 G sheet duly insulated complete with motor and belt drive package etc. without face and bypass dampers. The AHU panels shall be insulated with 40 mm thick & 38 Kg/m³ density PU foam. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specification. Compatable with Air Ozone System)
-
-
-
The face velocity across cooling coil shall be limited to 152 MPM maxm.The capacity of Air-handlers shall be as follows:
(For AHU No. Please Refer Basic Of Design & AC Tender Drawing )
-
-
-
AHU Static Cooling Motor Coil Area Filter Cap. Pr. Coil Row KW SMT CFM mm of WC Deep
-
-
-
20000 75 mm 6 Row 11 3.71 Pre
2
-
-
Item No. 38 : Supply, installation, testing and commissioning of GI powder coated fan coil units complete with fan, 3 speed motor, 3/4 row deep cooling coil, aluminium filters with filter box, double sandwitched insulated tray, ball valve with strainer, balancing valve, copper connection, rotary switch, supporting arrangement, electrical wiring etc. The fan shall be selected for 12 mm static pressure. The complete fan coil unit shall be in line with the standard specification. The capacity of fan coil units shall be as follows:
-
-
-
1.5 TR , 600 CFM, 12 mm SP
1
-
-
2.0 TR , 800 CFM, 12 mm SP
4
-
-
Item No. 39 : Supply, installation, testing and commissioning of automatic control for Fan Coil Units consisting of two way motorised valves with snape acting motor & thermostat.
-
-
-
1.5- 3.0 TR ( 25/32 mm dia.)
5
-
-
Item No. 40 : Supply, installation, testing and commissioning of two way motorised valves duly insulated ( 50 mm thick EPS , 20 Kg / meter³ with modulating moter in cooling coil & heating Coil of air handling units with actuator & electronic modulating thermostat with digital display alongwith transformer of following size.
-
-
-
25 mm dia
2
-
-
40 mm dia
5
-
-
65 mm dia
2
-
-
INSULATED CHILLED WATER PIPING ( Expanded Polystrene Insulation)
-
-
-
Item No. 41 : Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect.
-
-
-
Note : The Pipes of sizes 150mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.
-
-
-
125mm dia.(50mm thick insulation)
75
-
-
100mm dia. (50mm thick insulation)
15
-
-
80mm dia. (50mm thick insulation
180
-
-
65mm dia.(50mm thick insulation)
10
-
-
50mm dia.(50mm thick insulation)
85
-
-
40mm dia. (50mm thick insulation)
10
-
-
32 mm dia(50mm thick insulation)
85
-
-
25 mm dia(50mm thick insulation)
20
-
-
INSULATED VALVES
-
-
-
Item No. 42 : Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately upported as per specifications.
BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot water circulation as specified
-
-
-
80mm dia.
22
-
-
50mm dia.
4
-
-
40mm dia.
4
-
-
SUB HEAD 2.2 - PIPING & INSULATION WORK
-
-
-
Item No. 43 : BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified.
-
-
-
80mm dia.
5
-
-
50mm dia.
2
-
-
40mm dia.
2
-
-
Item No. 44 : NON - RETURN VALVE with duel plate of C I body SS plates anized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified.
-
-
-
80 mm dia.
3
-
-
Item No. 45 : Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified.
-
-
-
80mm dia.
8
-
-
50mm dia.
2
-
-
40mm dia.
2
-
-
Item No. 46 : Providing and fixing in position the industrial type pressure gauge complete as required
34
-
-
Item No. 47 : Providing & fixing in position the mercury in glass industrial type thermometer complete as required
14
-
-
CONDENSER WATER PIPE
-
-
-
Item No. 48 : Supplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS ‘C’ class along with necessary clamps, vibration isolators and fittings such as bends,tees etc.but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect.
-
-
-
Note:-The Pipes size 150mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. And from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.
-
-
-
150 mm dia.
55
-
-
100 mm dia.
65
-
-
40 mm dia.
40
-
-
32 mm dia.
40
-
-
VALVES WITHOUT INSULATION
-
-
-
Item No. 49 : Supplying, fixing, testing and commissioning of following size valves, gauges and strainers for condenser water circulation as per specifications.
-
-
-
BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O-ring & PN 16 pressure rating as specified.
-
-
-
150 mm dia.
3
-
-
100 mm dia.
20
-
-
65 mm dia.
2
-
-
Item No. 50 : NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as pecified.
-
-
-
100 mm dia.
3
-
-
Item No. 51 : Supply, installation, testing and commissioning of Pot - Strainer of the following sizes conforming to standard specification.
-
-
-
150 mm dia
1
-
-
SUB HEAD 2.2 - PIPING & INSULATION WORK
-
-
-
Item No. 52 : Supply , installation , testing and commissioning of condensate drain water piping of GI 'Medium' class complete with Medium Class fittings like elbows, tees, reducers bends, MS flanges, supports, welding, painting 25 mm thick EPS insulation etc. as required conforming to standard specifications and of following sizes.
-
-
-
40 mm dia pipe
50
-
-
50 mm dia pipe
50
-
-
65 mm dia pipe
50
-
-
Item No. 53 : Supply, installation, testing and commissioning of auto air vent valve of following sizes:-
-
-
-
12 mm dia auto air vent valve
20
-
-
DUCTING, GRILLS,DIFFUSER AND INSULATION
-
-
-
Item No. 54 : Supply, installation, balancing and commissioning of factory abricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and pecifications of following sheet thickness complete as required.
-
-
-
Thickness 0.63 mm sheet
400
-
-
Thickness 0.80 mm sheet
500
-
-
Thickness 1.00 mm sheet
435
-
-
Thickness 1.25 mm sheet
50
-
-
Item No. 55 : Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.
15
-
-
Item No. 56 : Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.
8
-
-
Item No. 57 : Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.
6
-
-
Item No. 58 : Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.
6
-
-
Item No. 59 : Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications.
-
-
-
Damper
8
-
-
Actuator
12
-
-
Item No. 60 : Supplying, fixing testing commissioning of volume control dampers with anti smudge ring & removable core.
5
-
-
Item No. 61 : Supplying & fixing of powder coated Linear extruded aluminium Supply / Return Air Grills with aluminium volume control dampers as per specifications.
-
-
-
150 mm
40
-
-
Item No. 62 : Supplying & fixing of Fresh air intake louvers with bird screen dampers (Aluminium extruded only).
5
-
-
Item No. 63 : Supplying and fixing of acoustic lining of duct with Open Cell cross linked polyethylene density 80-100 Kg/m³. Applied by Adhesive, conforming to standard specification.
-
-
-
10 mm thick open cell XLPE
20
-
-
15 mm thick open cell XLPE
60
-
-
Item No. 64 : Supply & Installation of Thermal Insulation on Ducts not exposed to sunlight using Physically / Chemically crosslinked polyethylene foam, with factory reinforced alupet foil facing, with Class O fire properties,with very low fire propagation of 5.5 and passing E-84 at 25/50, as per tender technical specification, the density of the foam should be not less than 25-30kg/m3 and the maximum thermal conductivity K should be 0.032W/mK@ 23 Deg C , the permeability resistance factor u shouldn't be less than 14000. to be applied on Ducts using manufacturer's recommended Adhesive in a blend of Solvents.
-
-
-
13 mm thick Close cell XLPE
400
-
-
19 mm thick Close cell XLPE
950
-
-
SUB HEAD 2.4 - ELECTRICAL WORK
-
-
-
CUBICAL PANEL BOARD For
-
-
-
i) 70 TR Actual Water-Cooled Scroll Chilling Machine (3W+1S)
ii) 7. 5 KW CDW Pumps (3W+1S)
iii) 2. 25 KW P.CHW Pumps (3W+1S)
iv) 7. 5 KW S.CHW Pumps (2W+1S) v) 3.75 KW (100 TR) Cooling Tower (3W+1S)
-
-
-
Item No : 65 Supply, installation, testing and commissioning of non draw out Cubical type sectinalised & Compartmentalised floor standing powder coated switch board of 31 MVA fault capacity at 415 V complete with 4 strip, 250 A capacity Aluminium Bus - Bar Electrolytic grade,cable alley & supplying & fixing of following switchgears as per specifications including connections & interconnections.
i) INCOMER
-
-
-
02 No. - 250 A FP MCCB Manual Draw out Microprocesser ased adjustable protection relays type with overload,short ckt.,earth fault protection release & under voltage protection, selector switch, 96mm ammeter & 96mm Voltmeter with selector switches, phase indication light with protection fuse,on / off / trip indicating light with Protection Fuse. ACB shall be of 50 KA (Icu = Ics).
ii) Bus Coupler
-
-
-
01 No. - 250 4 Pole MCCB Manual Draw out manually operated drawout type Bus Coupler. MCCB shall be of 50 KA iii) Incomers and bus coupler shall be mechanically electrically interlocked with one set of castle key interlocking system ( 3 locks and 2 keys )interlocked to avoid paralleling of the two supplies.
OUTGOINGS
For 3 Nos. 70 TR Scroll Water Chilling Machine
03 NO. - 150 A FP MCCB Thermal Maganitic release adjustable type with overload,short ckt.,Protection, on/off /trip indicating light with Protection Fuse.
-
-
-
For 3 Nos. 7.5 KW Condenser Water Pumps.
03 No. - 40 A TP MCB with Conforming to BIS Star Delta starter, overload relay, start/stop push buttons, ammeter (0-40A) with three CT, on / off / trip indication lights with protection fuse, single phase preventer. For 3 Nos. 2. 25 KW P. Chilled Water Pumps.
03 No. - 40 A TP MCB with Conforming to BIS Star Delta starter, overload relay, start/stop push buttons, ammeter (0-40A) with three CT, on / off / trip indication lights with protection fuse, single phase preventer.
-
-
-
For 3 Nos. 7.5 KW S. Chilled Water Pumps.
03 No. - 40 A TP MCB with Conforming to BIS Star Delta starter, overload relay, start/stop push buttons, ammeter (0-40A) with three CT, on / off / trip indication lights with protection fuse, single phase preventer. For 3 Nos. 3.75 KW - Cooling Towers.
03 No. - 40 A TP MCB with Conforming to BIS Star Delta starter, overload relay, start/stop push buttons, ammeter (0-40A) with three CT, on / off / trip indication lights with protection fuse, single phase preventer. Controls & interlocking accessories as Complet with Connection / interconnection required for above switchgears
-
-
-
SUB - PANELS FOR AIR HANDLING UNITS
-
-
-
Item No. 67 : Supply , installation , testing and commissioning of Cubical type sectionalised & Compartmentalised wall mounted switch board with 4 strip Alunimun Bus Bar suitable capacity, Cable allay etc of of as detailed below & conforming to the specification. Including connections & interconnection etc as required.
-
-
-
AHU Sub Panel - Supply Air Blower ( Up to 11 KW)
6
-
-
01 No. - 40 A TP MCB with Conforming to BIS Direct on Line starter, overload relay, start/stop push buttons, ammeter (0-40A) on / off / trip indication lights with protection fuse, single phase preventer. Controls & interlocking accessories as Complete with Connection / interconnection required for above switchgears
-
-
-
POWER & CONTROL CABLING
-
-
-
Item No. 68 : Supply, laying, testing and commissioning of power and control cabling, as per Standard specification including end termination as required.
Power Cabling (XLPE) insulated and PVC sheathed, armoured, Aluminium Conductor of 1.1 KV grade on cable trays).
-
-
-
3.5C x 95 Sq. mm
120
-
-
3C x 10Sq. mm
210
-
-
3C x 6 Sq. mm
110
-
-
Earthing Strip / Wires.
-
-
-
Pdg.and fixing 25 x 5 mm G.I. strip along with Cable Tray as required.
150
-
-
Pdg. & fixing 6 SWG GI wire on surface or in recess , along with the exiting cable for loop earthing Including connection etc as required.
350
-
-
Supply & laying of rubber mat of size 900 mm & 12 mm thick
4
-
-
Item No. 69 : Supplying and installing following size of perforated pre-painted M.S cable trays with perforation not more than 17.5% in convenient sections,joined with connectors,suspended from the ceiling with M.S suspenders including bolts & nuts,painting suspenders etc as requuired.
-
-
-
150 mm width x 50 mm depth x 1.6 mm thickness
150
-
-
300 mm width x 50 mm depth x 1.6 mm thickness
90
-
-
600 mm width x 50 mm depth x 1.6 mm thickness
60
-
-
SITC of 63 A FP MCCB in duly enclour in MS box including complete with connection / interconnection etc. as required for Conforming to Specification for cooling tower
3
-
-
SUB HEAD 3.0 - MECHANICAL VENTILATION SYSTEM
-
-
-
Ventilation fan
4
-
-
Air Qty. = 20000 CFM Static Pressure = 25mm Wg
Fan Speed = not exceeding 1450 rpm
Motor = 12.5 KW
Fan Dia = 1000 mm (Approx.)
Noise level = not exceed 90 db at 1 meter distance
Tube Axial Fans as described above.
-
-
-
Fan Sub Panel - Supply Air Blower ( Up to 15 KW)
4
-
-
01 No. - 40 A TP MCB with Conforming to BIS Direct on Line starter, overload relay, start/stop push buttons, ammeter (0-40A) on / off / trip indication lights with protection fuse, single phase preventer. Controls & interlocking accessories as Complet with Connection / interconnection required for above switchgears
-
-
-
NOTE: The AC contractor shall provide fire shunt relay contact in his panel wherever necessary along with auto / manual mode selector switch in the outgoing feeder for Ventilation & Pressurization fan etc.to take fire input signal (Potential Free Contact).Cost shall be included in the panel price quoted by him.
-
-
-
Item No. 70 : Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm.
106
-
-
Item No. 71 : Removing excavated material exceeding 250m but not exceeding 500 m and depositing where directed
26
-
-
Item No. 72 : Plain Cement Concrete in foundations, filling & mass concrete D2 1:4:8 (40 mm graded aggregate).OPC replaced with 100 % PPC
13
-
-
Item No. 73 : Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1:4
2
-
-
Item No. 74 : M-25 concrete for RCC workWalls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses
23
-
-
Item No. 75 : Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter
224
-
-
Item No. 76 : S/F TMT bars 10mm dia and over cut to lengths bent to shape required including cranking bending spirally for hooping for columns, hooking ends and bindings with mild steel wire (annealed)not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified.
358.4
-
-
Item No. 77 : S/F TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders required for columns, hooking ends and bindings with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified.
1433.6
-
-
Item No. 78 : Medium duty precast concrete manhole cover frame & gratings Test Load – 10 MT as per IS 12592 Part – I & II
MHCF-18
5
-
-
Item No. 79 : Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity1.5 TR.
1
-
-
Item No. 80 : Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4.0 KVA
1
-
-
Item No. 81 : Supply and fixing modular AC Box (white) with 3 pin socket two in one, all in one type, single pole and neutral box with one single pole MCB 32 A, 230 Volts inculuding modular metal Box, modular cover plate with frame of 4 module complete all as specified and as directed.
1
-
-
PA SOUND SYSTEM
-
-
-
Item No. 82 : SITC of 2-Way, Bi-amp/Passive Full Range Line Array Cabinet having Transducer Size :Transducer Size : 2 x 8" LF Driver + 2 x 1" Planar Wave Manifold Compression Driver; Power Handling : HF - 100 Watts Continuous, 400 Watts Peak | LF - 400 Watts Continuous, 1600W Peak ; Freq. Range : 55 Hz - 20 kHz; Dispersion : 100 degree H x 10 degree V; Sensitivity : HF - 110 dB | LF - 96 dB Max SPL : HF - 136dB continuous, 142 dB peak | LF - 119dB continuous, 125 dB peak
Approved Makes: British Acoustics/OHM UK / Martin Audio / L-Acoustics /d&b audiotechnik /Meyer sound
8
-
-
Item No. 83: SITC of OEM array frames/ Hanging/ Mounting arrangement for Suspension of upto 8-10 array modules offered above, Shall offer multiple rigging points for achieving desired pitch settings. Approved Makes: British Acoustics/OHM UK / Martin Audio / L-Acoustics /d&b audiotechnik /Meyer sound
3
-
-
Item No. 84 : SITC of balcony Loudspeaker with a 12"inch Driver, 4" VC - Ferrite or better high SPL it sholud be surface mount loudspeaker. The louspeaker shall meet the following performance criteria: Frequency Range (-10 dB) of 34Hz - 18 kHz or better; Nominal Dispersion : 90°H x 50°V or better; Power handling of 625W peak or more; Sensitivity : 95 dB or better; Max SPL : 132 dB Peak or more with a Nominal impedence of 8 ohms .IP 65 . Shall be supplied with Wall Mount Bracket with standard accessories etc as required. Approved Make: British acoustics/ L-Acoustics/D&B AudioTechnik/ /Martin
4
-
-
Item No. 85 : SITC of deley Loudspeaker with a 2 x 6"inch Driver, 1.5" VC - Ferrite or better high SPL it sholud be surface mount loudspeaker. The louspeaker shall meet the following performance criteria: . Shall be supplied with Wall Mount Bracket with standard accessories etc as required.
6
-
-
Item No. 86 : SITC of 2x18" subwoofer Ultra Low Drivers, 4" VC - Ferrite. The louspeaker shall meet the following criteria: usable Frequency Range (-10 dB) of 37 Hz - 200Hz or better. It should have an axial Sensitivity of = 101dB (1W/1m) or more delivering a free field Max. Calculated SPL(peak) of =144 db or better. The loudspeaker should have a nominal impedance: 4 ohm or more and continuous Power Handling of 2000W or more; Complete with installation as per the site requirement.
2
-
-
Item No. 87 : SITC of monitor Loudspeaker with a 12"inch Driver, 4" VC - Ferrite or better high SPL it sholud be surface mount loudspeaker. The louspeaker shall meet the following performance criteria: Frequency Range (-10 dB) of 34Hz - 18 kHz or better; Nominal Dispersion : 90°H x 50°V or better; Power handling of 625W peak or more; Sensitivity : 95 dB or better; Max SPL : 132 dB Peak or more with a Nominal impedence of 8 ohms .IP 65 . Shall be supplied with Wall Mount Bracket with standard accessories etc as required.
2
-
-
Item No. 88 : SITC of High Performance Amplifier 3300W (1650 W X 2 channels @4 ohm); THD 0.02%; damping factor 400; inbuilt Sensitivity Selection - High Pass Cut Off - Stereo, Bridge, Parallel Switch, Signal to Noise Ratio (1 kHz, 8 Ohms)- 105 dB .
3
-
-
Item No. 89 :SITC of High Performance Amplifier 5000W (2500 W X 2 channels @4 ohm); THD 0.02%; damping factor 400; inbuilt Sensitivity Selection - High Pass Cut Off - Stereo, Bridge, Parallel Switch, Signal to Noise Ratio (1 kHz, 8 Ohms)- 105 dB
3
-
-
Item No. 90 : SITC of Software Controlled Digital DSP with below Specifications:-
Number of Inputs - 4,
Number of Outputs - 8,
Input Impedance - 12kΩ unbalanced, 24 kΩ balanced
CMMR - 45 dB
Adjustable Delay - 1 second / input & 1 second / output
2
-
-
Item No. 91 : SITC of pre-amplifier features 8K HDMI passthrough, 3D audio formats, audiophile-quality music playback, multi-room HEOS® Built-in technology, and voice control. with 8K/60Hz pass-through or upscaling, as well the latest in HDMI technology like Dynamic HDR and Quick Media Switching (QMS), which is used in movies to eliminate video delay. Multichannel Pre Out Yes (11.2 RCA & 11.2 XLR)
1
-
-
Item No. 92 : SITC of 32-channel analog mixer with fully programmable high-end mic preamps and 16 mix buses, configurable as subgroups
1
-
-
Item No. 93 : SITC of Wireless Lavaliere Microphone System, Wireless Microphone system with MHZ carrier frequency band, Up to 16 pre-programmed frequencies within the same frequency band, Audio bandwidth 35 - 20,000 Hz THD at 1 kHz: 0.3% (Receiver), Signal-to-noise: 120 dB(A) ( Receiver), Wideband FM Modulation Up to 48 Simultaneous channels, up to 14 hours operation with one single AA battery or better, Pilot Tone transmission to know the transmitter battery status, Receiver should have microphone level and line level output, Transmitter should have display to show the battery and LED to show the Muted /Unmuted status, Sensitivity 6.3 dB V / -100 dBm, Should have Microprocessor-controlled diversity, T.H.D. 0.7 % (Transmitter), Infrared programmable, RF output power: 10 or 50 mW
2
-
-
Item No. 94 :SITC of Wireless Handheld Microphone System, Wireless Microphone system with MHZ carrier frequency band, Up to 16 pre-programmed frequencies within the same frequency band, Audio bandwidth 35 - 20,000 Hz THD at 1 kHz: 0.3% (Receiver) , Signal-to-noise: 120 dB(A) ( Receiver), Wideband FM Modulation, Up to 48 Simultaneous channels , up to 14 hours operation with one single AA battery or better, Pilot Tone, transmission to know the transmitter battery status, Receiver should have microphone level and line level output, Transmitter should have display to show the battery and LED to show the Muted /Unmuted status Sensitivity 6.3 dB V / -100 dBm, Should have Microprocessor-controlled diversity, T.H.D.: 0.7 % (Transmitter), Infrared programmable, RF output power: 10 or 50 mW With Twin Channel True Diversity Wireless Receiver. offers users upto 16 simultaneous operating channels, over a PLL synthesized circuit and anti-interference support, True-Diversity dual channel receiver comes in a 19" rack size and can be mounted using the rack mount accessory. The RF range for the receiver is 100m (Line of Sight)
4
-
-
Item No. 95 : SITC of Vocal Dynamic microphone with Frequency Response:50 Hz - 16 kHz, Polar Pattern:Cardioid, Sensitivity:1.6 mV / Pa @ 1k, Max SPL:≥ 140 dB.
4
-
-
Item No. 96 : SITC of Condensor Instrument Microphone, Frequency Response:80 Hz - 18 Khz, Polar Pattern:Cardiod, Sensitivity:–52 dBV/Pa (1.85 mV), Max SPL: 129.5 dB, 1 kHz at 1% T.H.D.
4
-
-
Item No. 97 : SITC of 21" Gooseneck microphone with base, shall have a condenser diaphragm to deliver superior sonic performance. The diaphragms are specially tuned to provide a boost in the human vocal range. Frequency Response: 20 Hz - 17 kHz, Polar Pattern: Cardioid, Sensitivity: -36±3 dB* (15.8mV) 0dB =1V /Pa,1kHz, Max SPL : 140 dB, 1 kHz at 1% T.H.D.
4
-
-
Item No. 98 : SITC of cMic Stands Big, with boom arm
4
-
-
Item No. 99 : SITC of Mic Stands Small, with boom arm
4
-
-
Item No. 100 : SITC of Customized Floor Box with1x Mic In, 2xLAN and 2x Power Socket and Provision to mount HDBT Trasmitter.
2
-
-
Item No. 101 : SITC of Speaker Cable – 4.0 Sqmm (128/0.20mm) x 2 core cable ATC copper conductor PVC insulated, core twisted, outer jacketed with Vasiform Type PVC Sheath.
400
-
-
Item No. 102 :SITC of Speaker Cable – 2.5 Sqmm (80/0.20mm) x 2 core cable ATC copper conductor PVC insulated, core twisted, outer jacketed with Vasiform Type PVC Sheath.
800
-
-
Item No. 103 : SITC of 18 AWG microphone cable (24/0.20mm) x 2 core ATC copper conductor, PE insulated, core twisted in a circular form, Inner sheathed with moisture Proof Polymer, braid shielded (80%) with ATC copper, outer Jacketed with Matt finish Rugged Flexible PVC.
800
-
-
Item No. 103 : SITC of for Auditorium, bulk connectors such as XLR (Male & female), RJ-45, Speakon, Phono, Stereo Jack, velcro tape, cable ties etc as per site requirement.
1
-
-
Item No. 104 : SITC of of 42 U Equipment rack to house all rack mountable equipment, with internal wiring, front glass door,heat dissipation fans,power distribution units etc.complete with standard accessories as required.
1
-
-
SUPPLY AND FIXING OF AUDITORIUM CHAIRS WITH PUSHBACK MECHANISM & AUTO TIP-UP
-
-
-
Item No. 105 : Auditorium Mild Back Chair with cupholder and bolts 51 Main+ 449 add on Supply and placing exclusive premium fabric modernist classic design auditorium chair size is : 980mm W:525 mm D; 560mm construction seat & back understructure are made in moisture content shall be less than (10-12)%. Thicness of plywood used (mm) shall be 12mm grade is 303 indian standard for commercial (common) and moisture proof plywood (tentative). framing are made in metal should be finishing with epoxy polyester black powder coated to the thickness of 50-60 microns (1/5 micron) chair upholstered in standard high resilience polyurethane molded pu foam having density 40 +/-5 laminated with fabric - polyester. chair have common sharng arms made in plastic armrests shall be high impact injection molded polypropylene plastic in black colour with cupholder arms. full plastic seat shell formed to fit the contour of the body when in the sitting position. the multiple curves give the spectator long time support. The waterfall at the front of the cushion reduces pressure points. The seat bottom and seat-lifting mechanism is totally enclosed by an injection molded polypropylene plastic seat shell in black colour unique texture
TP
100
-
-
Item No. 105 : Auditorium Mild Back Chair with cupholder and bolts 51 Main+ 449 add on Supply and placing exclusive premium fabric modernist classic design auditorium chair size is : 980mm W:525 mm D; 560mm construction seat & back understructure are made in moisture content shall be less than (10-12)%. Thicness of plywood used (mm) shall be 12mm grade is 303 indian standard for commercial (common) and moisture proof plywood (tentative). framing are made in metal should be finishing with epoxy polyester black powder coated to the thickness of 50-60 microns (1/5 micron) chair upholstered in standard high resilience polyurethane molded pu foam having density 40 +/-5 laminated with fabric - polyester. chair have common sharng arms made in plastic armrests shall be high impact injection molded polypropylene plastic in black colour with cupholder arms. full plastic seat shell formed to fit the contour of the body when in the sitting position. the multiple curves give the spectator long time support. The waterfall at the front of the cushion reduces pressure points. The seat bottom and seat-lifting mechanism is totally enclosed by an injection molded polypropylene plastic seat shell in black colour unique texture
TP
500
-
-
Item No. 109 : Sofa set 04 Seater (02+02 Seater) (Godrej Make: Porto 2-Seater Sofa)
Supply and placing in Potision of 2 seater modernist classic desigh jesse sofa sku : jesse/2 size : 1320mm(I) x 860mm(d)x 830 mm (h), Material: premium leatherette / style : contemporary colour : green-advo green / finish : matte. Supplying and placing two seater exclusive premium leatherette modernist classic desigh louge seating sofa size is 1200mm (I) x 720mm (d)x 845mm(h) with solid wood framing makes it warp and scratch resistant, comfortable seat depth & height designed keeping modern indian lifestyle in mind, wrapped in buttery - soft premium leatherette / classic button-tufting, the panelled back and solid wooden armrests encourage lounging, designed with modernity & elegance, choose the option that suits your home. Combination construction structure are made in moisture content shall be less than (10-12)% thickness of plywood used (mm) shall be 12 mm grade is 303 indian standard for commercial (common) and moisture proof plywood (tentative). structure frame shall be constructed from solid wood wooden framing is highly durable.
2
-
-
the seat & back structure shall be covered by p.u. foam fixed with adhesive glue, the frame shall be padded with high resilience polyurethane foam having 40 +/-5 density in seat 40mm thik, 40mm thick back foam having 40 +/-5 desity foam used, seat & back structure shall be covered with in green-advo green colour, it complements the modish legs are made by squre shape in solid wood material, (seat: 440mm (h), back height@ 470mm), The seller/ company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : GREEN PRO, indian design mark, AIOTA, FSC & SEDEX. The bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and an official link/screenshot of the product listing must be provided.
TP
-
-
-
Item No. 110 : Chair Revolving Executive type (Make: Durian/Godrej/Wipro or equivalent)
Dimension: The Base pedestal assembly of chair computer shall be of dis 700mm and 1060 mm high. Discription: The chair revolving shall be high back type with push back and tilt mechanism of hydraulic base with PU soft arms. The padestal assembly shall be provided with injection moulded in black 30% glass filled nylon. A 10.5mm dia forged bright Zinc plated MS castor pin is of press fitted into each prong for holding the castors. The seat and back of the chair computer shall be made of 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. The back form shall be designed with contour lumber support for extra comfort with PVC lipping allround. The back rest shall be adjustable and consist of drop lift mechanism and shall be adjusted in the insert. It shall be scratch and weather resistant. Rest all as per drg and as per sample approved by BSO/GE. Finish: Pre treated with epoxy powder coated oven baked with ivory white color/white/warm grey Drgs – TP
7
-
-
Item No. 111 : Table Office Clk Steel: Overall size shall be 1200mm long, 410mm wide and 760mm wide and 440mm deep. The base shall be of 25 mm square tube of 1.6mm wide thickness. Legs shall be joined in short sides with 25mm square tube of wide thickness 1.6mm a long stiffener joining short stiffeners shall be provided the middle of short stiffeners. The top of legs shall be joined in short side with 25 mm square tube of wall thickness 1.6mm . on right side, when viewing the table, three drawers shall be provided of 110mm wide. the total height of drawers shall be 430mm and 440mm deep. the drawers shall be made of 1mm thick mild steel sheet. 25mm square mild steel tube 1.6mm wall thickness stiffeners shall be provided for the drawers. The drawers shall run smoothly over one another, the top of table shall be of 19mm thick MDF board commercial over which 1.5mm thick plastic aminated sheet shall be fixed. The standard PVC edging shall be provided to all round thedging of top of table PVC/hard rubber toes shall
Drgs – 381
2
-
-
Item No. 112 : Almirah Small Steel With Shelves : Dimension: Overall size shall be 1270mm high, 765mm wide and 440mm deep. The base shall be made of two numbers mild steel sheet channel base welded to bottom of almirah and shall be 100mm high. Specifications: Mild steel sheet shall be 1mm thick for channel base. The base channel shall be welde at 50mm from each and of 765mm op, sides, back bottom and front of almirah shall be of almirah shall be of 1mm thick mild steel sheet. Three shelves equally spaced making four compartments will joints and welding, fixing shall be done according standard workmanship
6
-
-
LOCKING DEVICE: The locking device shall be three way locking device and shall also be provided with decorative key plate. take of lock-Harrison/Godrej/Linkor equivalent.
HANDLE: A steel chromium plated handle 100mm long shall be provided to the shutter. FINISH: All steel csurfaces exposed to view when placed in position shall be painted with two coats of sliver hammer paint over a coat of primer th spray machine after preparation of surfaces. Rest all as per drgs.
FD-1032
-
-
-
Item No. 113 : Rack Steel (1830mm x 760mm x 1905mm) Overall size for two units shall be 1830mm long, 760mm wide and 1905mm high. Mild steel angle iron 30mm x 30mm x 3mm shall be used in ners and in middle for two units as vertical support. The rack shall be open from all sides. Mild steel shett 1.25mm thick shall be provided to helves (including top). all steel and iron surfaces exposed to view when placed in position shall be painted with two coats of anamen paint a coat of primer after preparation of surfaces as directed by engineer-in-charge. painting shall be done with spray machine. all as shown drawing and as directed.
Drgs : FD- 129(M)
5
-
-
Item No. 114 : Stool Revolving (Adjustable) steel
overall size shall be 455mm dia and 600mm high four legs of 25mm dia mild sheet pipe legs made to shap of thickness 1.6mm irrespective of what is shown on drawing. 12mm dia mild steel bar ring shall be provided at 150mm from bottom joining four legs as show on drawing. Two cast iron discs shall be provided at top of legs and at 100mm top of legs as shown on drawing and fixed to legs with 6mm dia bolt. 25mm dia threaded steel bolt 255mm long fixed with 6mm thick steel plate 100mm dia and top of 25m dia threaded bolt shall be provided as shown on drawing the padded seat shall be fixed on 6 mm thick, 100mm dia steel plate with scren for which four number holes are provided in steel plate. Padded seat shall be 38mm dia, the bottom of padded seat shall be 30mm soft wood over which a layer of coir shall be provided to give proper shape as shown on drawing.
2
-
-
hessian cloth shall be provided to cover the layer of coir and under the soft wood padded seat. A layer of cotton shall be provided and covered with rexene cover alround the top and bottom to form the padded seat. All steel surfaces exposed to view when placed in position shall be given two coats of enamel paint over a coat of primer after preparation of surfaces. Hard rubber/PVC toes ahsll be provided to the bottom of legs. All as shown on drawing.
FD-354
-
-
-
Item No. 115 : Recepticle PVC
DIMENSION/CAPACITY: The recptacle shall be of capacity 40ltrs DESCRIPTION: The body of receptacle Pvc shall be made up of thick polymer plastic of thickness not less than 5mm, provided with swivel lid and steel handles on both sides as shown in drg. FD/E6/MAP/13
4
-
-
Item No. 116 : Lecture stand/Compodium
overall size shall be 970mm wide and 1220mm high. Two upright of mild steel rectangular tube of 75mm x 25mm of 1202 mm high shall be provided in rear side and shall be 635mm apart. The two upright shall be joinded with bottom, middle and top rails with 75mmx50mm mild steel tube of wall thickness 1.6mm. The two sides rails at bottom fixed at 125mm from bottom shall be 430mm long 75mmx50mm mild steel tube of wall thickness 1.6mm and shall form the part of bottom rails and join the long side of bottom rail of size 785mm long. 75mm 50mm mild steel tube of wall thickness 1.6mm. The front base below bottom rails shall be of 785mm long and 125mm x 50mm mild steel tube of wall thickness 1.6mm and this shall be joined with rear uprights with sides of base which shall be 430mm long 125mmx50mm mild steel tube of wall thickness 1mm. Two support of angle iron shall be provided to the bottom rails owards sides of 150mm long over which 1.6mm thick mild steel foot rest shall be fixed. foot rest shall be 635mm long.
1
-
-
The two sides rails at top fixed and 170mm from buttom shall be 505mm long 75mm x 50mm mild steel tube of all thickness 1.6mm and shall form the part of top rails and jon the long side of top rails, middle rail and bottom rails in the front two corners. To sloping supports of 25mm square mild steel tube of wall thickness 1.6mm shall be welded to sloping upright Supports for making shell which shall have 12mm thick pre laminated MDF BOARD irrespective of what is shown of drawing.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%