Military Engineer Services Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Military Engineer Services - MES Tender
Eprocure
Opening Date12 Nov 2024
Closing Date3 Dec 2024
Tender Amount₹ 49,59,000
Costs
EMD
₹ 99,200Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_683433_1Tender No
8749/GE (MIS)/MhowTender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Tender documents
BOQ Items
Taking down Cement Plaster of any description on Brick or Stone walls or Concrete Surfaces including Racking out Joints, hacking for Key, scrubbing down with Water, etc. complete removal of debris outside MD land.
950
-
-
Demolition of brick work built in cement mortar or cement lime mortar including all quoins arches pillars etc complete all as specified and directed.
5
-
-
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specified complete all as directed.
13
-
-
Taking down chowkats or frames with shutters (with out taking off shutters from the frames) n. exc 1.50 Sqm each.
25
-
-
Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each.
10
-
-
Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each .
5
-
-
Taking up or down steel tubing and connections for bore of tube 15 mm, complete all as specified and directed.
50
-
-
Taking up or down steel tubing and connections for bore of tube 20 mm, complete all as specified and directed.
50
-
-
Dismantling water tanks and removing to store exc 250 & n. exc 1000 litres capacity
3
-
-
Demolition of cement concrete (unreinforced) in roof/terrace other than ground floor etc, including Taking down existing roof treatment and sweeping clean and washing down with water to remove dust etc of any description not exceeding 15cm thickness as directed and specified.
10.63
-
-
M&L for rendering 10mm thick in cement mortar 1:3 mixed with integral water proofing compound while concrete surface is green and finish the surface even and smooth without using extra cement all as specified and directe.
850
-
-
M&L for 25mm thick cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in roof top etc complete all as specified
850
-
-
Supply & providing water proofing roof treatment with polymeric standard water proofing membrane, Aqua flex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness complete all as specified and described as under:-
(a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufacturer's specification complete all as specified and directed.
(b) Supply & providing water proofing with 3 mm thick APP polymeric proofing membrane of 3Kg/Sqm HYPERPLAS STANDARD/ MULTIPLAS STANDARD consisting of 100 micron HMHDPE film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed (c) Aluminium bituminous paint @0.15 Kg/Sqm shall be applied over the APP membrane surface. NOTE:- The work of water proofing treatment shall be got executed only through authorised applicator certified by Manufacturer's.
850
-
-
M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6., etc complete all as specified and directed.
5
-
-
M&L for hardcore of gauge n exc. 63 mm,of broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
13
-
-
M&L for 100mm thick in nominal mix of PCC (1:4:8) with approved quality of stone metal, clean coarse sand including Mixing, laying, placing and vibrating with plate vibrator as in foundation or bases of interlocking paver block filling complete all as specified and directed.
130
-
-
M&L sand filling under floor including waterring and consolidaion complete all as specified and directed.
2
-
-
M&L for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand complete all as specified and as directed.
100
-
-
M&L for chequered cement concrete tiles with grey cement and pigment of size n exc 0.16 Sqm and minimium 25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified
30
-
-
M&L 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) for levelling course in floors complete all as specified and directed.
200
-
-
M&L for scratch free Glazed (Porcelain) Vitrified Tiles (GVT)/ Polished Glazed Vitrified Tiles (PGVT) 9mm to 10mm thick (square or rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.72 sqm ( ie) size 600x1200 in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed. Make of tile : Superior quality tiles from Kajaria/Somany/Orient Tiles. Note : (a) Size and pattern / texture of GVT (Matt Finish) / PGVT(Glossy Finish) shall be approved by GE (b) Glazed Coating on GVT / PGVTshall not be less than 1mm thick .
160
-
-
All as per item No 24 above but as in skirting/ dado or all vertical surface etc with and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified
16
-
-
M&L for scratch free, doubly charged, vitrified ceramic tiles 9 to 10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.
Make of tile : Superior quality tiles from Kajaria/Somany/Orient Tiles.
100
-
-
All as per item No 26.00 above but as in skirting/ dado etc surfaces of wall complete all as specified and as directed.
10
-
-
M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed.
75
-
-
M&L for glazed ceramic coloured tiles of size not less than 450x300x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:6) complete all as specified and as directed.
120
-
-
M&L for Endura coloured tiles 7-8mm thick of size 300x300x7mm thick in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed.
25
-
-
M&L for machine cut kota stone slab in flooring 20mm to 25mm thick laid over and including 15mm thick screed bed in cement mortar 1:6 and pointed with cement mixed with pigment to match with the shade of slab including rubbing and polishing complete all as specified
180
-
-
Cutting and mirror polishing of exixting kota stone flooring as per the direction given by Engr in Charge.
300
-
-
M&L for 18-20 mm thick Black granite slab of approved quality of any size bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges complete all as specified and directed.
15
-
-
S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete incl special shape all as specified and as directed.
25
-
-
M&L in for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming IS-1161-1979 grade ST-240 complete incl special shape all as specified and as directed.
250
-
-
Preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete complete all as specified and as directed
12.5
-
-
S&F PVC Ceiling Lining (False Ceiling) incl frame work for PVC Ceiling consisting of 5mm thick Plain colour PVC sheet 8 to 10 mm hollow section inclusive of solvent cement and fixing at site on frame work as per requirement on site complete all as specified
70
-
-
S&F for anodised aluminium snap grid of 605mmx605mm size frame work for false ceiling with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.
30
-
-
M&L for exposed metal frame ceiling with 6mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid frame work complete all as specified.Note: Frame work shall be measured and paid separately under relevant item.
30
-
-
S&F PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet 8 to 10 mm hollow section inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, including taking down of old board, complete all as specified and directed.
120
-
-
M&L for rendering 10mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement complete all as specified and directed.
400
-
-
M&L for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surface with liquid water proofing compound @ 200 ml per bag finished even and fair without using extra cement complete all as specified and directed.(Note:- Liquid water proofing compound to be measured paid separately)
300
-
-
Supply onle liquid water proofing Compound @ 200ml per beg of cement complete all as specifed and directed.
6
-
-
M&L for rendering 5mm thick in ceiling CM 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
250
-
-
Complete removal of old treatment on internal/External surfaces of wall & celling by scrapping , and washing etc all as specified.
1900
-
-
M&L for applying two coats of first quality oil emulsion distember over a coat of primer over a coat of Acrylic / Water proofing wall Putty on walls complete all as specified . Note:- Putty shall be measured and paid seperately under relevant item.
1250
-
-
Material and labour for wall,pillasters, cornices etc precoat treatment apply two coats of Anti fungal weather coat aacrylic emulsion paint over a one coat of wall care acrylic putty and apply coat of primer (X2) complete all as specified and directed Make of Arcylic emulsion weather coat paint :- Asian (Apex Ultima), Berger (Super coat) or ICI Dulux (weather shield) Make of primer :- Asian (X2) or Equivalent Note :- (a) Each stage i.e preparation of surfaces,application of primer,application of first coat. application of second coat will be got passed from Engr-in-Charge (b) Written Warranty for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item (c) Putty shall be measured and paid seperately under relevant item.
800
-
-
M&L three coats of white washing on plastered / concrete celling sufaces incuding preparation of surfaces.
800
-
-
M&L for preparation of wall and and applying 2mm thick Acrylic / water proofing wall putty in two coats (each coat not less than 1mm thick ) and surface finished even and smooth with sand paper complete all as specified
3150
-
-
Finishing walls with textured paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
50
-
-
S&F pressed steel door frames of size 125x60mm, made of 1.25mm thick sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,hold fast includ etc., complete as specified
10
-
-
S&F pressed steel door frames of size 105x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified as directed
30
-
-
M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregate as in bed blocks, coping, for fixing holdfast/lugs,filling hollow space of pressed steel door frame etc including necessary form work all complete as specified and as directed.
1
-
-
M & L 2 nd class hard wood 35 mm thick Plain , framed panelled shutters ( any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as speciifed and directed.
15
-
-
S & F 2 nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.
10
-
-
S&F factory made, 35mm thick prelaminated MDF board shutter solid core construction with prelamination on both sides complete all as specified and directed by Engr-in-Charge.
5
-
-
M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of filler coat with grey filler or liquid wood filler, transparent, and bringing forward surfaces to smooth even finish, comlete, all as specified.
30
-
-
M&L for Preparation of Old painted surface of Wood of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed.
50
-
-
S&F for factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.
30
-
-
S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.
15
-
-
S & F in repair curtain rails 20 mm dia, decorative type, stainless steel including fixing brackets in both sides fancy type complete all as specified and directed..
150
-
-
S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed/Glass and one shutter wire mesh) with following specification complete all as specified and as directed by Engineer-in-charge.
(i) Windows frame of cross section 101mm x 44mm (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm (iii) Sliding shutter frame of cross section 40 x 18mm
(iv) 4 mm thick glass superior quality. (Min)
(v) IDPE Rubber guasket for fixing of glass.
(vi) Locking cleats per shutter -01 Nos. (Min)
(vii) Sliding rollers per shutter - 02 Nos. (Min)
(viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos. Note- (a)Thickness of Aluminium Section shall be minimum 2 to 3mm (Final Thickness and Cross Section of Aluminium section of higher size without any extra cost shall be approved Engineer in Charge as per Site requirement (b) Drawing /size of window shall be provided by Engineer in Charge during execution of work as per site requirement.
25
-
-
S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.
100
-
-
S & F powder coated aluminum door with the following specification and making good the adjacent surfaces, complete all as specified and as directed.
(a) Cross section of chowkhat frame 101.60x44.45mm
(b) Cross section of hanging and meeting style 83x44mm
(c) Top rail of cross section 114x44mm
(d) Bottom rail of cross section 114x44 mm (e) Locking rail (middle rail) of cross section 83x44 mm
(f) 4 mm thick glass superior quality. (Min)
(g) Aluminum handle eisc type -02 Nos per shutter (inside & out side).
(h) Aluminum door stopper heavy duty-01 Nos per shutter. (i) Aluminum tower bolt 200mm long-01 Nos per shutter (inside).
(j) Concealed Lock with key superior quality makae and type as approved by GE openable both from inside & out side -01 Nos per shutter. Note- (a)Thickness of Aluminium Section shall be minimum 2 to 3mm (Final Thickness and Cross Section of Aluminium section of higher size without any extra cost shall be approved Engineer in Charge as per Site requirement (b) Drawing /size of window shall be provided by Engineer in Charge during execution of work as per site requirement.
22
-
-
S&F in repair fabricating coloured powder coated aluminium frame work,door shutter ,windows , ventilators, partisions with one or more rebates sections of approved tint as required for partions including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed.
15
-
-
S&F in repair aluminium coloured power coated window and ventilator shutters, sliding type without sash bar alu section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc complete all as specified and directed.
20
-
-
S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium doors/window/partition incl necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified and directed.
10
-
-
S & F for galvanised Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed.
10
-
-
S&F aluminium (extructed section) Door closer hydraulically regulated, desingnatin No. 3, universal type, suitable for door shutter and fixed complete all as specified and directed.
10
-
-
S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
10
-
-
S&F Veneered decorative 18 mm plywood, grade 1 (with BWR resin) with decorative laminate min 1mm thick on both faces, fixed with screws to timber frame work as in cupboard shelf/partition including taking down the existing structure / board on site all as specified . Note : Colour and texture of laminate shall be approved by GE
20
-
-
S & F 100 mm size butt hinges, Stainless steel with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete .
15
-
-
S & F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete.
20
-
-
S & F aluminium 150 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete.
10
-
-
S & F 150 mm size aluminium handles cast type, anodised ISI marked complete
20
-
-
S & F 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete.
5
-
-
S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.
10
-
-
M&L for floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 140mm long, fixed in floor complete all as specified
15
-
-
S & F in repair powder coated aluminium door seal 30mm wide and length as per requirement of site including dust/insect arrestor complete all as specified and directed.
5
-
-
S&F factory made PVC shelf / partition of required size consisting of panel of 18 mm thick required size consisting of panel of 18 mm thick celuka PVC ply and for supporting the hold of shelf / partition and shall provided 3 edges in size 18mm x 18 mm as per required length the front side of the edge visible in the front of the shelf/partition to be edge lipped by 18mm width x 1 mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company , using solvent cement etc. complete all as specified and directed by Engineer-in-charge.
20
-
-
S&F Aluminium Composite Panel (ACP) of any colour of exterior edge for cladding near entrance of Alucobond/Alstrong/Brand approved equivalent make for external wall / column / canopy cladding in combination of solid / Metallic colours, including all necessary frame work and complete weather sealing. The composite panel should consist of 3mm thermoplastic core of LDPE sandwiched between 2 skins of 0.5mm thick aluminium sheet (alloy designation 310S) making a total panel thickness of 4mm. The surface shall be furnished with Lumiflon based flourcarbon coating on top sides and service coating on reverse side. Coatings shall conform to specifications of ECCA /AAMA and conforming to the mechanical properties of panel as per detailed technical specifications. The system shall be fixed using GI brackets and stainless steel bolts and nuts complete with spring washers and cap nuts and all other necessary accessories. The bracket support shall be designed as per manufactures specification and shall withstand a wind pressure of 150 Kg/Sqm. All hardware shall corrosion resistant frame out of anodised aluminium member.
20
-
-
S&F Framed work such as grills, gratings, guard bars for windows, and ventilators, barred iron work, ladders, framework of water tanks and similar work complete all as specified and as directed.
100
-
-
S&F 15mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,complete all as specified and as directed.
50
-
-
All as per item No 83.00 above but 20mm bore complete all as specified and as directed.
50
-
-
S& F in repair Rotational moulded Polyethylene water storage tank 1000 liters capacity (cylidrical vertical with closed top) of two layer hoisted and fixed in position all as specified in SSR part I complete all as specified and as directed.
3
-
-
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc and hoisting if required and re-fixing in position exc 500 & n. exc 1000 litres capacity
2
-
-
S&F in repair kitchen sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall or including fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm including taking out unserviceable kitchen sink complete all as specified and as directed.
2
-
-
S&F in repair Long body CP Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed
2
-
-
S&F in repair CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified .Make-Plumber/Essco of jaguar(Economical Range)and directed..
16
-
-
S&F in repair fancy type chromium plated15mm bore two way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and as directed. Make-Plumber/Essco of jaguar(Economical Range)
4
-
-
S&F in repair vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified and as directed .
6
-
-
S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)
1
-
-
Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device
4
-
-
S&F in repair PVC valve less,syphonic action type flushing cistern,low level ,white with inlet ball valve,float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified and directed. .Make-Plumber/Essco of jaguar(Economical Range)
5
-
-
S&F in repair health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and as directed.Make-Jaquar Item code ALD-CHR-563
4
-
-
Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed
4
-
-
S&F CP toilet paper holder complete all as specified and as directed. Make Jaquar or equivalent as approved by GE.
4
-
-
Vitreous China wash basin, angle back, size 550x400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets
4
-
-
S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe)
2
-
-
S & F PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed.
12
-
-
S&F 5mm thick beveled edge mirror of any shape selected quality glass of area n exc 1.44 Sqm, mounted on PVC framed and fixed to wall surface with CP screw and CP washer ccomplete all as specified and directed.
8
-
-
S&F PVC connection 15mm size with PTMT nuts of length 450 mm long complete all as specified and as directed.
20
-
-
S&F for 20mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed
8
-
-
S & F in repairs 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed.
10
-
-
S & F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.
10
-
-
S & F in repairs 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed.
10
-
-
S&F in repair 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.
10
-
-
S&F in repair for 40mm Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed.
6
-
-
S&F Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed.
4
-
-
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
4
-
-
S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed.
4
-
-
S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
4
-
-
S&F reinforced concrete pipes, class NP-2 laid and jointed with collars of 300 mm bore of pipe complete all as specified and directed.
6
-
-
M&L PCC 1:3:6, Type C2 inConcrete bed to drain pipes NP2 ,450mm dia including packing under, and completely surrounding pipes with concrete after they are laid and tested; in
6
-
-
Cutting into existing manhole for connecting new drains making good to pipe and rendering cutting out existing benching for and ternning branch channel (1/2 round as 3/3 section) in cement concrete type B-1 1:2:4 smoth finished and benching as required for 150 mm pipe complete all as specified and directed.
2
-
-
S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 20mm-210 gms) complete all as specified and as directed
3
-
-
M&L RCC Nominal Mix using 20 mm graded stone aggr as in beams, bands, cantilvers, bressummers, linters, chajjas, etc over 1.5m span etc complete all as specified and directed
1
-
-
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping), etc For Fair Finish Surfacecomplete all as specified and directed.
10
-
-
M&L high strength steel deformed TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified and directed.
50
-
-
M&L for Mild steel bars (TMT bars) 5mm dia and over upto and including 10mm dia in strriups,spaces,nibs and binders complete all as specified and directed.
40
-
-
M & L for 75mm thick cement concrete 1:3:6 type C1, with using 20mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed.
50
-
-
M&L for Treating the soil under the plinth protection at the rate of 5 litre of emulsion per square metre of surface area.complete all as directed and specified.
50
-
-
M&L for Treatment of soil under existing floors using emulsion @ one ltr per hole 300mm apart including drilling and plugging 12mm dia holes to match the existing floors with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors all as directed and specified.
80
-
-
S&F 12mm thick Frosted Toughned Glass fixed on patch hinges/pivot for smooth functioning in door shutter including stainless steel handle of 8 inches long and mortice locking arrangement complete all as specified and as directed
10
-
-
M&L for 25mm thick 2nd class softwood to Boarding, supplied & fixed with nails in any situation (except flooring and skirting), Planed one side with butt joints complete all as specified and as directed.
10
-
-
M&L for Bees-wax polishing on wood based surface of any description, width or girth including cleaning and preparing the surface complete all as specified and directed
10
-
-
S&F 10-15mm thick Polycarbonate sheet in dome structure/similar condition with rubber neoprene/similar packing material fixed and packed with sheet including dismantling of existing sheeting complete all as specified and as directed.
10
-
-
Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc.
246
-
-
Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and as directed.
26
-
-
Taking down existing geyser of any capacity after disconnecting all necessary electrical and water supply connections and deposit to MES store yard of AGE E/M complete all as specified and as directed.
2
-
-
Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.
280
-
-
Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface all as specified and directed at site.
10
-
-
Taking down existing single phase electric energy meter of any capacity after disconnecting all necessary electrical connections and deposit to MES store yard of AGE E/M complete all as specified and as directed.
1
-
-
M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC FRLS concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches and blank plates, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-
-
-
-
(a) One light point controlled by one, one way switch 5 Amps
106
-
-
(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator
26
-
-
(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on Same board.
26
-
-
(e) One 3 point 5 Amps switch socket outlet point controlled by one switch on Independent board.
40
-
-
All as per item No 134.00 above but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point on independent board including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.
38
-
-
All as per item No 134.00 above but using 4.0 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for geyser point/AC point connecting to metal plug and socket DB incl necessary running of 4.0 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.
10
-
-
S & F for Modular Switch , single pole, one way, and 5/6 Amp single module complete all as specified.
198
-
-
S & F for Modular Switch , single pole, one way, and 15/16 Amp single module complete all as specified.
38
-
-
S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module complete all as specified.
66
-
-
S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module complete all as specified.
38
-
-
S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.
19
-
-
S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified
122
-
-
Supply and fix in repairs integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes including taking down the existing complete all as specified and directed. Make:- Havells Cat No. LHEXBLP7PN1W018 , Bajaj cat Pt No. BCLSB 18WH or equivalent in Wipro
76
-
-
S & F for Decorative ultra slim LED light fitting 2 feet 10 watts, 6500K batten aluminium extruded with end caps complete all as specified and as directed. Cat No LHEXACP7IN1W010 of Havells/equivalent make in / Wipro/Philips.
10
-
-
S & F for Decorative wall mounted luminaire brushed nickel finish fixture with opal glass diffuser made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 7W watts complete all as specified and as directed. Cat No LHFOAJE1TZ11060 of Havells / or equivalent make in Philips/Crompton/wipro.
10
-
-
S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe 40 mm dia medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Cat No ENXT P 36L WH CR PC SD of Bajaj or equivalent make in Philips, Wipro/Havells
10
-
-
M&L for Sub main wiring in repairs with two runs of single core FR LS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25/32 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including PVC insulated unsheathed FR LS 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly from main distribution board complete all as specified and directed by Engr-in-Charge.- Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit
120
-
-
M&L for Sub main wiring in repairs with Four runs of single core FR LSH PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 32 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including FR LS PVC insulated unsheathed 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable (Two runs of 6 Sq mm for earth wire) connected to earth dolly from main distribution board complete all as specified and directed by Engr-in-Charge. Note: Four Run of Single Core FRLSH ( 6Sq mm) Cable and two runs for same size as earth wire(6 Sq mm).
110
-
-
Supply and Fix in repairs flush mounting factory made Vertical TPN DB, IP-43 Protection -IK 08, with metal double door with 200 Amps rated copper busbar with 2 neutral bar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing with provision of sapce for TP/FP 100-125 amps G Frame MCCB as incomer and SP/TP MCBs as out going 8 way complete all as specified and directed by Engr-in-Charge. Make - HPL/L&T/Havells
4
-
-
Supply and fix in repairs double door TPN DBs 04 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed by Engr-in-Charge. Make - HPL/L&T/Havells
2
-
-
Supply and fix in repairs double door SPN DBs 08 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed by Engr-in-Charge. Make - HPL/L&T/Havells
6
-
-
S & F in repairs MCCB FP ,415 Volt Adjuustable type ,160 Amps With Breaking capacity 36 KA including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge. Make - HPL/L&T/Havells
1
-
-
S & F in repairs MCB TP 25 to 63 amps 10 KA, c-series including connection with suitable size aluminium/copper lugs complete all as specified and directed by Engr-in-Charge. Make -HPL/L&T/Havells
3
-
-
S & F in repairs MCB TPN 40 to 100 amps 10 KA, c-series including connection with suitable size aluminium/copper lugs complete all as specified and directed by Engr-in-Charge. Make - HPL/L&T/Havells
3
-
-
S & F MCB SPN 6 to 32 amps 10 KA, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge.
6
-
-
S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge.
58
-
-
S & F for metal clad box suitable for 230 volt 50 Hz for AC connection three pin and socket with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed
10
-
-
S & F for energy efficient exhaust fan of non metal body 250 mm sweep , complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall or fixing in aluminium fabricated windows including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).
3
-
-
Labour only for refixing the celing fan/ Exhaust fan obtained from item No 5 above with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed.
18
-
-
Supply and fixing in replacement of water heater storage type of 5 Star rating, capacity 25 liters with , glass coated heating element to protect the heating element from oxidation and carbonization. The geyser should be tough enough to withstand pressure upto 8 bars . The inner tank should have a minimum 7 years warranty . The geyser should have company fitted and warrented ELCB or shock safe plug including PTMT connections 15 mm size with nuts and length of 450 mm with all accessories such as safety valve, thermostate incl fixing arrangements. complete all as specified and as directed. Note: Old Geyser will be deposted by the contractor in E/M sotre yard.
2
-
-
Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece ,angle cock etc complete all as specified and directed by Engr-in- Cherge Make - Bajaj /Havells /Jaguar
155
-
-
S&F in repairs Single pole and neutral Sheet Metal enclosure with a two pin and earth plug and socket complete with one single pole MCB,20 Amps incl cutting of wall and fixing of AC box in concealed system and making good of disturbed surfaces complete all specified and as directed.L&T, Havells,Indo Asain, HPL
155
-
-
M&L for Sub main wiring in repairs with two runs of single core FR LS PVC insulated unsheathed cable 1100 volts grade, 2.5 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including FR LS PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly from main distribution board complete all as specified and directed by Engr-in-Charge. Make of PVC conduit/Casing Caping:- Plaza/Finolex/Polycab/Kalinga/Jindal/ Asian& Make Of wire - Make -HPL/L&T/Havells
420
-
-
M&L for Cutting chases, pininig in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintal etc and cutting chases for concealed water tubing etc and making good, cutting not exc 20 cm girth in walls etc complete.
200
-
-
Supply & fix 15 mm bore GI water tubing "medium grade" galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete.
305
-
-
Supply & fix Stop valves 15 mm , chromium plated fancy type cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
155
-
-
Supply & fix Bib taps 15 mm , chromium plated fancy type cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed down,screwed for iron pipe or for unions and fixed.
155
-
-
S & F for MCB Four pole rated capacity 100 Amps, 240 volts breaking capacity 10 KA complete all as specified and as directed.Make: ABB/L&T/Schneider
3
-
-
S & F in repairs MCB SP 6 to 32 amps 16 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge. Make - HPL/L&T/Havells
10
-
-
S & F in repairs MCB SPN 40 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge. Make - HPL/L&T/Havells
10
-
-
M & L for Earthing in repairs complete with galvanized steel earth plate electrode 60cm x 60cmx 6.3 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with the top edge of the earth plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No.5 of MES SSR parts-I and including excavation & earth work in any type of soil , disposal of soil , providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix 1:3:6 type c-1 with 40 mm thick RCC 1:2:4 type B-J cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completion, complete all as specified and directed.
Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.
4
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%