Military Engineer Services Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 40,800Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_MES_210038_1Bid Award Id
ViewTender No
8489/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Almirah medium 1/2 S 1/2 H shelves wooden. DRG NO DB-4116
25
-
-
Book case. DRG NO FD-232.
4
-
-
Book shelf open large . DRG NO FD-69.
4
-
-
Chair CBB. DRG NO DB-3972.
20
-
-
Book Shelf open small DRG NO TP
20
-
-
Chair dining long back. DRG NO FD-357.
23
-
-
Chair easy cushioned. DRG NO FD-358.
20
-
-
Hat stand with mirror. DRG NO FD-233.
30
-
-
Table dining 8 persons. DRG NO FD-239.
20
-
-
Table dressing ladies. DRG NO FD-378.
100
-
-
Table peg. DRG NO FD-384.
200
-
-
Table Bed side. DRG NO FD-276.
200
-
-
Table writing. DRG NO FD-275.
50
-
-
Rack side four spaces wooden. DRG NO DB-4123.
50
-
-
Side board. DRG NO FD- 241.
40
-
-
Table dining 6 persons. DRG NO FD-273.
74
-
-
Table 1520 x 860 x 760mm. DRG NO FD-139(M).
22
-
-
Table Office Officer wooden. DRG NO DB-4119.
20
-
-
Table Office Clerk wooden. DRG NO DB-4920.
75
-
-
Teapoy. DRG NO FD-278.
120
-
-
Table 900 x 600 with drawer. DRG NO FD-224.
200
-
-
Table 600 x 600 x 760mm. DRG NO FD-95 (M).
30
-
-
Table 3' x 2' without drawer. DRG NO FD-231.
38
-
-
Table 900 x 900 x 760mm. DRG NO FD-88.
60
-
-
Table 12' x 3' with out drawer. DRG NO FD-94.
5
-
-
Table conference. DRG NO FD-8(M).
2
-
-
Sofa set 5 seater. DRG NO FD-281.
35
-
-
Chair dining. DRG NO FD - 279
820
-
-
Chair easy. DRG NO FD-229
200
-
-
Bed Hard with ply wood top. DRG NO FD-246.
500
-
-
Chair Writing. DRG NO FD-280.
300
-
-
Table center. DRG NO FD-274.
80
-
-
Stool dressing CB. DRG NO FD-27(M)
25
-
-
Table dressing gents. DRG NO FD-379
150
-
-
Board notices 1830 x 1230 mm. DRG NO FD-99(M)
20
-
-
Sofa Chair. DRG NO FD-281, 373.
30
-
-
Sofa set 4 seated. DRG NO FD-281
9
-
-
Table 6' x 3'. DRG NO FD-37
19
-
-
Work Table 10' x 3' x 3' with 3 drawers one side. DRG NO F-46
2
-
-
Work Table 10' x 3' x 3' with 3 drawers both side. DRG NO F-46
3
-
-
M & L for Polishing to wooden furniture, all unevenness shall be rubbed down to smoothness with suitable motorized grinder / sand paper and the surfaces shall be well dusted, the pores in the surface of the wooden parts of the furniture shall be filled with a filter made of paste of in water of mathylated spirit with a suitable pigment like burnt sienna, polishing to the prepared wooden surface with two coat of French polish of high glossy finish, and painting the metal parts of the furniture such as bottom frame, legs etc made out of MS square/pipe after cleaning and preparing the surfaces all as directed for the following items of furniture.
-
-
-
Desk in first class hard wood. DRG NO FD-107
400
-
-
Form without back. DRG NO F-7
250
-
-
Foam with back 1200 mm. DRG NO F-2,F-78(M)
1000
-
-
Foam with back 1900 mm. DRG NO F-20
50
-
-
M & L for Locking device consisting of base plate made out of 12 gauge MS sheet and Lever plate made out of 16 gauge MS sheet to the required length, 'D' shape, suitable for almirah large/medium steel including taking down of old locking device. Drg No: FD-1031, FD-1032
100
-
-
S & F of 8 mm dia round bar type locking device of suitable size and shape for almirah large steel including painting with two coats of synthetic enamel paint over a coat of primer to new surface including taking down old bar. Drg No: FD-1031
50
-
-
S & F of 8 mm dia round bar type locking device of suitable size and shape for almirah medium steel including painting with two coats of synthetic enamel paint over a coat of primer to new surface including taking down old bar.
Drg No: FD-1032
40
-
-
S & F for Godrej Lock 6 Lever with two keys suitable for almirah Large/Medium steel including taking down of old lock. Drg No: FD-1031, FD-1032
225
-
-
S & F for Godrej Lock 6 Lever with two keys suitable for table steel all types including taking down of old lock. Drg No: FD-1003, FD-1004, FD-1005
200
-
-
S & F for Chromium plated MS handle 125mm long suitable for Godrej brand lock for almirah Large/medium steel including taking down old handle.
Drg No: FD-1031, FD-1032
200
-
-
S & F for MS Shelving clips/supports made out 0f 10 gauge Sheet with required number of screws of suitable size for almirah large/medium including taking down of old shelving clips.
Drg No: FD-1031, FD-1032
300
-
-
S & F for Lock cover (outers) Godrej pattern made out of 10 gauge MS sheet to the required size and shape for almirah Large/medium steel including taking down of old lock cover.
Drg No: FD-1031, FD-1032
100
-
-
S & F for Safety type Hasp & staples of MS chromium plated size 75 x 40x3mm for Locker bed side steel including taking down of old Hasp & staples.
Drg No: FD-1029
400
-
-
S & F for 2 mm thick mild steel chromium plated steel Handle 100 mm Long fixed to steel Locker bed side including taking down of old handle.
Drg No: FD-1029
200
-
-
Removing and providing spot welding/ continuous welding where ever required for repairing Joints, door hinges, bottom legs, corners and other minor repairs like fixing of sheet etc for almirah Large/Medium and Locker Bed side, tables etc. Drg No: FD-1003, FD-1004, FD-1029, FD-1031, FD-1032
500
-
-
M & L for Preparation of existing painted steel surface by cleaning thoroughly of dirt, fluxing material and scrapped with hand scraper followed by wire bushing or by blow lamp and finally sand papering the surface to remove all scales and rust. The surface shall then be wiped finally with mineral turpentine to remove oil, grease etc. If any dents and scratches, it shall be filled with using a good metal putty by knife pressing and finally applying two coats of synthetic enamel paint of shade green/ phirozi blue over a coat of red oxide primer as required & approved (spray painting) for the following:-
-
-
-
(a) Almirah large steel with shelves
Drg No: FD-1031
127
-
-
(b) Almirah large steel 1/2H, 1/2SH
Drg No: FD-1034
5
-
-
(c) Almirah medium steel with shelves
Drg No: FD-1032
240
-
-
(d) Locker bedside steel
Drg No: FD-1029
1000
-
-
M & L for applying Two coats of synthetic enamel paint over green colors (spray painting) to steel parts of table office officers /clerks including scrubbing down the rusted steel surface and giving one coat of red oxide primer to rusted surface, after carrying out sheet metal repair works such as removing dents, minor welding works, applying metal paste / putty etc.for the following:-
-
-
-
(a) Chair tubular steel CB office with Arms
Drg No: FD-75(M)
100
-
-
(b) Chair CB tubular steel BC office without arms
Drg No: DB-3972
75
-
-
(b) Chair CB special with hand rest
Drg No: FD-120(M)
90
-
-
(c) Chair school with hand board
Drg No: FD/E6//MA/P/05
100
-
-
M & L for repairing the unserviceable chair revolving Godrej pattern by replacing the old unserviceable parts such as swivel movement bearing, hydraulic seal, spring and ball wheel set (all three) with newer one complete including greasing and servicing etc., all as directed.
DRG NO: PCH 9102R, PCH 5002T, PCH-7031
30
-
-
M & L for repairing the unserviceable chair revolving Godrej pattern by replacing the old unserviceable parts such as swivel movement bearing, hydraulic seal, spring, ball wheel set (all five) and base frame with newer one complete including greasing and servicing etc., all as directed.
DRG NO: FD-E6 MAP 01
125
-
-
M & L for removing the existing unserviceable seat and back from chair revolving godrej and S& F new seat and back godrej pattern all as per DRG NO: FD-E6 MAP 01 and sepcification.
93
-
-
M & L for removing the existing unserviceable top from table computer godrej and S& F new table top of prelaminated particle board extrier grade 18/19mm thick all as per DRG NO: FD-E6 MAP 01 and sepcification.
125
-
-
M & L for removing the existing unserviceable cushion of 40mm thick, 40 density and supply and fixing suitably with same high quality cushion for chair seat and back all as directed. DRG NO: PCH 9102R, PCH 5002T, PCH-7031
20
-
-
M & L for removing the existing unserviceable rexine letherite from chair seat/back and supply, cut and stich/stick into required shape/size rexine letherite high quality of same shade into the same position complete all as directed.
DRG NO: PCH 9102R, PCH 5002T, PCH-7031
20
-
-
M & L for removing the following old unserviceable parts of Sofa set three seaters/single seater and S&F new components of first class teak wood including polishing the replaced component all as per DRG NO FD-281 and specific`ation :-
-
-
-
(a) Leg of sofa chairs (3/1 seater) size 70 x 35mm. DRG NO FD-281
120
-
-
(b) Arms rest of sofa chair (3/1 seater) size 35 x 70mm.
DRG NO FD-281
80
-
-
(c) Wooden rail to support back frame (3/1 seater) size 30x50mm.
DRG NO FD-281
40
-
-
(d) Wooden bearers for sofa set (single seater) 40x40mm. DRG NO FD-281
40
-
-
(e) Wooden top rails for sofa set (three seater) size 35 x100mm.
DRG NO FD-281
25
-
-
(f) Wooden battens for sofa set (3/1 seater) size 50x20mm. DRG NO FD-281
300
-
-
M & L for removing old unserviceable teak wood seat frame from existing chair Tubular steel type 'A' and S&F new teak wood seat frame duly caned fixing with nut and bolts and painting with two coats of synthetic enamel black paint over a coat of pink primer and painting the chair fully with a coat of synthetic enamel paint including preparation of surface all as directed. FD- 75(M).
150
-
-
M & L for removing old unserviceable teak wood back frame from existing chair Tubular steel type 'A' and S&F new teak wood back frame duly caned fixing with nut and bolts and painting with two coats of synthetic enamel paint over a coat of pink primer including preparation of surface all as directed. DRG NO FD-75(M).
140
-
-
M & L for removing old unserviceable teak wood arm rest of chair tubular steel type 'A' and S&F new teak wood hand rest fixing with suitable screws and painting with two coats of black synthetic enamel paint after applying pink primer including preparation of the surface.DRG NO FD-75(M).
200
-
-
M & L for removing old unserviceable teak wood seat of chair tubular steel type 'B' and S&F new teak wood seat duly caned fixing with nut and bolts and painting with two coats of black synthetic enamel paint after applying pink primer and painting the chair fully with a coat of synthetic enamel paint including preparation of surface all as directed DRG NO FD-75(M).
100
-
-
M & L for removing old unserviceable teak wood back of chair tubular steel type 'B' and S&F new teak wood back duly caned fixing with nut and bolts and painting with two coats of black synthetic enamel after applying pink primer including preparation of surface all as directed.DRG NO FD-75(M).
100
-
-
M & L for dismantling / removing old unserviceable hand rest for chair CBA special with hand rest and S & F new hand rrest of size 19 X 600X 300 mmm made out of prelaminated particle board " L" shape with PVC beading around the particle board and MS Tubular pipe of size 700 X 15mm "L" shape with clam screw and necessary and painting with two coats of synthetic enamel paint surface after carrying out proper preparation work all as directed. DRG NO. FD-260.
100
-
-
M & L for dismantling the existing unserviceable wheels/ bushings assembly of the computer tables supply and fix suitable PVC bushing wheel assembly all as directed.
60
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements