Military Engineer Services Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Military Engineer Services - MES Tender
Eprocure
Opening Date3 Sep 2024
Closing Date5 Oct 2024
Tender Amount₹ 42,50,000
Costs
EMD
₹ 85,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_670489_1Bid Award Id
ViewTender No
GE(I)/R ND D (WEST)/BAN/TOKEN/79 OF 2024-25 8338/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
(a) Aluminium bus bar 300 Amps supported with suitable size porcelain isolators with suitbale size brass nut, bolts and washers with heat shrinkable colour coded PVC sleeving for 3 phase and neutral -01 set (b) MCCB Adjustable 4 pole rating 200 Amps 35 KA 415 V 50 Hz - 01 No (Incoming) (c) MCCB 4 pole rating 100 Amps 25 KA, 415 Volts, 50 HZ -02 Nos (d) MCCB, 4 pole. 63 Amps 16KA, 415 Volts, 50 HZ -08 Nos (e) Ammeter digital type 0-300 A inbuilt with selector switch & CTS - 01 set (f) Voltmeter digital type 0-500V inbuilt with selector switch - 01 set
(g) LED indicator lamp -3 Nos
-
-
-
Disconnecting electrically operated squirrel cage crane heavy duty motor of cap 13.4 HP, AC 3 phase, 415 Volts from existing location of electro mechanically driven winch unit by unscrewing of nuts, bolt and dismantlling all parts carefully, checking all components in and including servicing, greasing, oiling etc as applicable for smooth functioning complete all as per site requirements and reassembling, alignment of motor complete with electro mechanically driven winch unit and testing complete all as directed by Engineer-in-charge.
4
-
-
Disconnecting locking pin motors of capacity 1 HP, 3 Phase, 415 Volts in respect of locking pin unit from existing location of RTP by unscrewing of nuts, bolt and dismantlling all parts carefully, checking all components in and including servicing, greasing, oiling etc complete all as per site requirements and reassembling, alignment of motor complete with the existing pin unit and testing complete all as directed by Engineer-in-charge. Note for Item Nos. 3 & 4 : (i) If motor demands rewinding works during currency of contract , the same shall be measured and paid separately under relevent item of the schedule (2) The contractor is responsible for functionig of winch motors and locking pin motors efficiently during entire currency period of the contract
4
-
-
Labour only for applying Greasing to spindles, guide rollers, platform locking pins etc arrangements of winch assembly unit - 01 No using necessary tools and plants, gease gun etc after dismanling all components carefully, removing of existing old grease and other lubricating materials from all parts by rubbing, scrapping and cleaning with the cotton waste, diesel and other cleaning material as applicable etc and applying fresh grease, assembling all parts carefully,alignment with winch unit properly testing complete all as directed by Engineer-in-charge.
4
-
-
Labour only for applying Black cadmium compound to hoisting mechanism wire ropes, rope drum and rope pulleys of winch assembly - 01 No using necessary tools and plants etc after dismanling all components carefully, removing of existing old cadmium compound and other lubricating materials from all parts by rubbing, scrapping and cleaning with the cotton waste, diesel or other any cleaning material as applicable etc and applying fresh cadmium compound, assembling all parts carefully, alignment with winch unit properly, testing complete all as directed by Engineer-in-charge.
4
-
-
Labour only for opening winch gearbox screws and nuts bolts, dismanling all components carefully, draining out existing oil from gearbox of winch assembly unit - 01 No using necessary tools and plants etc removing of old sludge and foreign material from gear box complete, overhauling of gear box parts complete and cleaning with the cotton waste, diesel or other any cleaning material as applicable etc and filling gear oil carefully, reassembling, alignment with winch unit properly, testing complete all as directed by Engineer-in-charge.
4
-
-
Labour only for disconnecting electro hydraulic thruster operated brake from winch assembly unit, dismantling all components carefully, draining out existing hydraulic oil using necessary tools and plants etc removing of old sludge and foreign material from thruster unit complete, overhauling of thruster brake system complete and cleaning with the cotton waste, diesel or other any cleaning material as applicable etc and filling hydraulic oil carefully, reassembling, alignment with winch unit properly testing complete all as directed by Engineer-in-charge. NOTE FOR SL No. 1 to 6 :- (i) The job shall be paid twice in the contract period with an interval of Three months periodcity. (ii) Grease, Black cadmium compound, Gear oil and Hydrullic oil as applicable shall be measured and paid separately under relevent item of this schedule as "SUPPLY ONLY".
4
-
-
Taking up defective electrically operated squirrel cage crane duty motor of cap 13.4 HP, AC 3 phase, 415 Volts from existing location, checking, measuring no load current, IR value and winding resistance using micro ohm meter before rewinding works and dismantling of motor, taking out defective winding wires and rewinding works with best quality existing gauge copper of existing gauge with new insulation materials, varnishing, heatinng, reassembling, testing, assembling of motor, carry out no load current and KW study and alignment of all the loosen parts including transportation and back including re-fixing, connections, testing and commisioning complete all as directed by Engineer-in-charge.
1
-
-
Supply, install, testing and commissioning electro hydrulic Thruster operated brake assembly complete unit KTM type 415 Volts, three phase, 50 Hz all as per existing on site and requirements in and including with all connected items by using necessary tools and plants complete in and including dismantlling, taking up old existing electro hydrulic Thruster operated brake assembly KTM type complete from the existing location of RTP winch unit with all connected items carefully complete all as directed by Engineer-in-charge.
2
-
-
Taking up defective motor, 3 phase, 415 Volts, AC 1 HP capacity from the existing location, dismantlling, removing the burn out winding, rewinding with same gauge copper wire, insulating, varnishing, reassemble parts, re-fixing in the same position, testing and commissioning complete all as directed by Engineer-in-charge.
1
-
-
Supply only Grease in 18/20 kg bucket for Greasing spindles, guide rollers, platform locking pins etc of Radar Test Platform all as directed by Engineer-in-charge. Make : Castrol (Premium longlife) or equivalent specifications as apporved by GE.
120
-
-
Supply only Black cadmium compound in 18 kg bucket for hoisting mechanism wire ropes, rope drum and rope pulleys etc of Radar Test Platform all as directed by Engineer-in-charge. Make : Balmerol (Bluecoat 2B) or equivalent specifications as apporved by GE.
400
-
-
Supply only Gear Oil 90 grade or equivalent type suitable for filling / top up in winch gear box as per site conditions all as directed by Engineer-in-charge.
80
-
-
Supply only hydraulic oil as per existing grade suitable for winch thruster break all as directed by Engineer-in-charge. Make for Sl No. 13 to 14 : Castrol/Shell/Servo.
20
-
-
Checking servicing caliberation and replacement of defective items of existing electro driven Four winch units control panel and their control wirings, connected control fuses, relays, connected parts and metering controls etc, taking out HRC fuses, over load protection relays and connected components, resetting, caliberation of all items with metering instruments including replacement of unserviceable defective parts and testing in all respects all as per site conditions complete all as directed by Engineer-in-charge. Note - (i) The bidder/tenderer shall visit the site and check the present status of the panel before quoting the rate. (ii) The contractor is responsible for functionig of winch motors, hoisting mechanism, gear box and thruster break system efficiently during entire currency period of the contract. (iii) Spares here-in-after mentioned shall be measured and paid separately as SUPPLY only and all other parts and works are inclusive in the quoted rate. Location - RTP
1
-
-
Material and labour for replacement of Brake shoe assembly with liner complete all as directed by Engineer-in-charge.
4
-
-
Material and labour for replacement of Coupling suitable for 1 HP motor complete all as directed by Engineer-in-charge.
2
-
-
Supply and fixing for replacement break drum Coupling of size as 200 mm dia suitable for winch unit as per site conditions complete all as directed by Engineer-in-charge.
2
-
-
Supply and fixing for replacement rotary limit switch near pin locking system of RTP type RLS -48, 415 Volts, 40 Amps as per site requirements complete all as directed by Engineer-in-charge.
4
-
-
Supply and fixing for replacement Lever type Limit Switch type - KLS, 415 Volts, 40 Amps complete as per site requirements all as directed by Engineer-in-charge Make - Radiant Machines Pvt Ltd or equ specifications model of any make as approved by GE.
2
-
-
Supply mounting fixing testing single avaition LED light fitting Red colour aluminium body complete ISI marked suitable for existing RTP site requirements including taking down old defective lights comlete all as directed by Engineer-in-charge.
2
-
-
Material and labour for replacement PVC insulated cable copper conductor of size 1.0 Sqmm 3 core round cable FR drawn through existing conduit of any type and size surface type including all accessories complete for RTP lights / avaition lights as applicable all as specified and directed by Engr-in-charge.
100
-
-
Supply only heavy duty switch disconnector fuse unit set of rating 32 Amp complete four pole all as pe site requirements in and including panel mounted selector switch for operating from outside of the panel, cable connections complete all as directed by Engineer-in-charge
4
-
-
Supply fixing testing and commissioning outdoor type push botton box 4 way of NO / NC 16 Nos system for RTP hoist, lower lock and unlock etc in and including connected wirings cluding taking down old defective NO/NC system comlete complete all as per site requirements all as directed by Engineer-in-charge.
4
-
-
Taking down existing and defective load cell display panel of Radar testing platform from the existing positions complete located in the command control room in and including disconnecting control wires of load cells from rope anchor positions of height 30 mtr (Appx) and panel, load cells and other connected all items carefully using required tools and plants, checking, servicing, caliberation of RTP platform weight on load display panel accurately as per site conditions complete all as directed by Engineer-in-charge. Note - (i) The bidder/tenderer shall visit the site and check the present status of the panel before quoting their rate. (ii) The contractor is responsible for proper functionig of load cell monitor panel system efficiently during entire currency period of the contract (iii) Spares here-in-after mentioned shall be measured and paid separately as SUPPLY only and all other parts and works are inclusive in the quoted rate. Location - RTP
1
-
-
Supply only rope tension loadcell as per site requirements of RTP complete all as directed by Engineer-in-charge.
4
-
-
Supply only signal special cable of size 0.33 sqmm , 4 core of RTP load display panel purpose complete all as directed by Engineer-in-charge.
100
-
-
Taking out the existing old LT Under Ground cable off sizes including loop of undermentioned sizes from panels/duct /trench/loop etc near the sub stations/pole/buildings/panels/RTP after disconnecting cables both ends, tracing out the fault with the help of megger and other tests as per site requirement for following cables complete all as specified and directed by Engineer-in -charge. Note:i) Earth work as applicable shall be measured and paid separately under relevent items. ii) Retrived bricks from site shall be properly stacked a side and reused as protection to U/G cable here-in-after.
900
-
-
Relaying only cables as obtained against item here-in-before as per site requirements and carrying out necessary connections in and including new lugs complete all as specified and directed by Engineer-in -charge. Note - i) Straight through Epoxy joints/water proof tape joints as applicable on site inclusive in the quoted rate.
200
-
-
Supply and lay cable LT XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 120 Sqmm 3.5 core including taking down existing old/damaged/burnt 1100 Volt grade cable complete all as directed by Engineer-in-charge
300
-
-
Supply and lay cable LT XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 95 Sqmm 3.5 core including taking down existing old/damaged/burnt 1100 Volt grade cable complete all as directed by Engineer-in-charge
200
-
-
Supply and lay cable LT XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 70 Sqmm 3.5 core including taking down existing old/damaged/burnt 1100 Volt grade cable complete all as directed by Engineer-in-charge.
200
-
-
Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 m in depth, for laying of cables, not exc. 10 Sqm on plan and getting out , trimming sides, forming bottom surface to required level complete in soft/loose soil all as specified and as directed by Engineer-in -charge..
194.4
-
-
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick as in soils all as specified and as directed by Engineer-in -charge.
144.4
-
-
Removing of excavated soil to a distance not exc. 50 M and depositing where directed at a level n.exc 1.5 M above starting point all as specified and as directed by Engineer-in -charge.
50
-
-
Supply and spread riddled earth soil conforming to IS 1255 for protection of cables in trenches below and above the cable complete all as specified and directed by Engineer-in-Charge.
58
-
-
Supply and laid for replacement local brick B class for cable protection, laid dry complete all as specified and directed by Engineer-in-charge
2
-
-
Relaying bricks as obtained here-in-before from excavation for cable protection complete all as specified and directed by Engineer-in-charge
1.5
-
-
Supply and laying for replacement GI tubing light grade 80 mm bore as cable protection fixed on wall/pole/laid in trenches including removal of old unserviceable pipe complete all as specified and as directed Engineer-in -charge.
75
-
-
Earthing complete for replacement with GI earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connected 32 x 6 mm GI earth strip by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 3 connected to earthing test point complete including testing on completion all as specified and as directed by Engineer-in-charge.
8
-
-
Earthing for replacement complete with copper earth plate electrode 600 x 600 x 3.15 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to 20 x 3mm copper earth strip by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 3 connected to earthing test point complete including testing on completion all as specified and as directed by Engineer-in-charge
8
-
-
Supplying and laying synthetic Rubber insulated mats 2 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m including taking down defective item complete all as specified and as directed by Engineer-in-charge.
25
-
-
Checking and Servicing to existing Main Electrical Pump of capacity 75 HP, lubrication,Greasing and Oiling of all Pump parts and Couplings, Checking the alignment of pump with motor, Coupling and shaft.,Checking of cable terminals ,foundation Bolt tightening, replacement of gland rope of suitable size as per site requirements complete, testing pump all as directed by Engineer-in -charge Note : (i) The job shall be paid twice in the contract period with an interval of Six months periodicity.
. (ii) Spares here-in-after mentioned shall be measured and paid separately as SUPPLY only and all other parts and works (except rewinding works) inclusive in the quoted rate. (iii) The contractor is responsible for functioning of pump efficiently during entire currency period of the contract. Location - Fire fighting Pump House, LRDE
2
-
-
Supply only shaft coupling with both side flange type and rubber coupling for 75 HP main pump complete all as per existing make and model, type all as directed by Engineer-in-charge.
1
-
-
Supply only Impeller shaft, brass type as per existing make and modeltype for 75 HP main pump all as directed by Engineer-in-charge.
1
-
-
Checking and Servicing to existing Jocky Pump of capacity 12.5 HP, lubrication,Greasing and Oiling of all Pump parts and Couplings, Checking the alignment of pump with motor, Coupling and shaft.,Checking of cable terminals ,foundation Bolt tightening replacement of gland rope of suitable size as per site requirements complete, testing pump all as directed by Engineer-in -charge. Note : (i) The job shall be paid twice in the contract period with an interval of Six months periodicity. (ii) Spares here-in-after mentioned shall be measured and paid separately as SUPPLY only and all other parts and works (except rewinding works) inclusive in the quoted rate. (iii) The contractor is responsible for functionig of jocky pump efficiently during entire currency period of the contract. Location - Fire fighting Pump House and MLVP of LRDE area.
4
-
-
Supply only shaft coupling with both side flange type and rubber coupling complete for 12.5 HP jocky pump all as per existing make and model, type all as directed by Engineer-in-charge.
2
-
-
Supply only Impeller shaft brass type as per existing make and model,type for 12.5 HP jocky pump all as directed by Engineer-in-charge.
2
-
-
Checking and Servicing to existing starter of Jocky Pump of capacity 12.5 HP located at MLVP, lubrication,Checking of cable terminals, relay and all other components in and including replacements of control wiring, defective parts, checking AUTO function of starter with the pump in all respects as per site requirements complete, testing all as directed by Engineer-in -charge. Note : (i) ) The contractor is responsible for functioning of starter efficiently during entire currency period of the contract. Location - Fire fighting Pump House and MLVP of LRDE area.
1
-
-
Checking and Servicing to existing of existing Diesel engine pump set of capacity 80 HP, lubrication,Greasing and Oiling of all engine and Pump parts and Couplings, Checking the alignment of pump with engine, Coupling and shaft.,Checking of cable terminals ,foundation Bolt tightening as per site requirements complete, testing engine all as directed by Engineer-in -charge. Note : (1) The job shall be paid twice in the contract period with an interval of Six months periodcity. (2) B Kit and Spares here-in-after mentioned shall be measured and paid separately as SUPPLY only and all other parts and works (except engine overhauling works) inclusive in the quoted rate. (ii) The contractor is responsible for functionig of Diesel engine pump efficiently during entire currency period of the contract.
2
-
-
Supply only B kit complete i.e total engine oil replacement, radiator coolent replacement, oil filter, Diesel filters and Air filter replacement, testing complete all as directed by Engineer-in-charge
1
-
-
Supply only Radiator hoses set, V-Belt, Engine hose pipe set and Fuel flexible pipe complete all as directed by Engineer-in-charge.
1
-
-
Supply and fixing for replacement Sluice valve class PN 1.6 Flanged type CI heavy duty 80 mm bore complete as existing with fire hydrants post pipe including jointing material rubber gasket mild steel nuts bolts of suitabe size with two numbers of washers on each bolt all asper site requirements complete all as directed by Engineer-in-charge.
4
-
-
Supply and fixing for replacement Air release valve class PN 1.6 Flanged type CI heavy duty 50 mm bore for fixing on existing with fire fighting DI 150 pipe including jointing material rubber gasket mild steel nuts bolts of suitabe size with two numbers of washers on each bolt all asper site requirements complete all as directed by Engineer-in-charge.
2
-
-
Supply and fixing for replacement Gun metal Fire hydrant valve single headed heavy duty 63 mm bore complete as existing with fire hydrants post pipe including jointing material rubber gasket mild steel nuts bolts of suitabe size with two numbers of washers on each bolt all asper site requirements complete all as directed by Engineer-in-charge.
4
-
-
Material and labour for rectification of fire fighting pipe line leakages of dia pipe upto 200 mm in the pipe line network of 22 Nos fire hydrants including welding works etc of any location in the LRDE area complete all as directed by Engineer-in-charge. Note - (i) Earth work,DI flange gasket, round rubber, MS nuts bolts and DI pipe as applicable shall be measured and paid separately under relevent items .
10
-
-
Supply and fixing for replacement DI flange gasket of thickness 4 mm suitable for DI class K - 9 flanged pipe dia 150 mm to 200 mm and connected valves etc best quality (as per sample available on site) all as directed by Engineer-in-charge
30
-
-
Supply and fixing for replacement Round rubber ring dia not less than 4" for DI class K - 9 flanged pipe valves etc best quality (as per sample available on site) all as directed by Engineer-in-charge
25
-
-
Supply and fixing for replacement MS nut bolt with double wahers best quality 32 mm dia 75 mm long suitable for DI K - 9 flanged pipe and connected valves etc best quality (as per sample available on site) all as directed by Engineer-in-charge
50
-
-
Supply and fixing for replacement DI (Ductile) flanged end pipe 150 mm inner dia 3 layered K9 in and including reqired DI fittings as per site requirements complete all directed by Engineer-in-charge. Note - Earth work shall be measured and paid separately under relevent item
25
-
-
Supply, Install, testing and commisioning in replacement of Intelligent Addressable Networkable 2 Loop mocro processor based Fire Alarm Control Panel able to connect 250 devices ( Detector or Module) per loop in any combination and have suitable number of loops in the panel with 20% spare address for Detectors in each & every loop. Should have Min 854 Char LCD multi-line QVGA LCD display complete with inbuilt additional Seven customized Programmable function switch for direct activation of any device or control along with Three programmable LED's. indication. Inbuilt min three Notification Appliance circuit ( NAC) for hooters. ( UL, ULC listed & CSFM, MEA, FM approved ) complete all as directed by Engineer-in-charge. Make: Notifier, NFS 640 or equivalent model in RAVEL /SIEMENS/APOLLO as approved by GE.
2
-
-
Supply and Installation for replacement Female Coupling Gun Metal of 63mm dia as per site requirements complete all as directed by Engineer-in -charge.
2
-
-
Supply and installaiton for replacement 63mm diameter Gun Metal Branch pipes with detachable gun metal nozzles as per existing and suitable site requirements complete all as directed by Engineer-in -charge.
2
-
-
Supply and installation for replacement RRL Hose - 15 Mtrs Long 63mm dia as per existing and suitable site requirements with one set of gun metal female and male instantaneous coupling complete all as directed by Engineer-in -charge.
6
-
-
Supply and Installation for replacement Glass for Hydrant Box with rubber beading as per existing and suitable site requirements complete all as directed by Engineer-in -charge.
2
-
-
Supply and installaiton for replacement key for hydrant box as per existing and suitable site requirements complete all as directed by Engineer-in -charge.
6
-
-
Supply and installation for replacement Hydrant Lug for hydrant valve as per existing and suitable site requirements complete all as directed by Engineer-in -charge..
6
-
-
Supply and installation of Shut off Nozzle 20 mm, PVC type to be picked at the end of rubber hose in the hose reel drum.complete all as directed by Engineer-in -charge.
6
-
-
Supply and installation in replacement Pressure Gauge 0 to 16 Kg/cm2 as per existing and suitable site requirements complete all as directed by Engineer-in -charge.
1
-
-
Supply and installation for replacement Spindle Washer for Hydrant Valve as per existing and suitable site requirements complete all as directed by Engineer-in -charge..
6
-
-
Supply and installation of Rubber Blank Cap for hydrant Valve outlet of size 63mm dia.complete all as directed by Engineer-in -charge.
6
-
-
Material and labour for one coat of synthetic enamel paint red colour and black colour etc all as per site, best quality all weather protect proof type paint for Fire hydrants stand post/stand post of 1.5 mtr height including gun metal fire hydrant valve 63 mm and bottom sluice valve 80 mm etc complete all as directed by Engineer-in-charge. Location - LRDE area fire hydrants (22 Nos) and MLVP builing area stand post (06 Nos).
28
-
-
Material and labour for one coat of synthetic enamel paint red colour and black colour etc all as per site best quality all weather protect proof type paint for Fire brigade instantaneous inlet connection 4 way 63 mm of 1.5 mtr height complete all as directed by Engineer-in-charge Location - LRDE area
6
-
-
Labour for servicing, checking, caliberation, testing of existing fire alarm panel, connected wiring system, detectors and devices of any type as per existing on site,Panel make - RAVEL, in and including cables continuity, checking and clearing of fault in the system if any, activation of MCP settings and making serviceble entire system round the clock during currency of contract, location - MLCP, LRDE complex complete all as directed in Engineer -in-Charge.
2
-
-
Labour for servicing, checking, caliberation, testing of existing fire alarm panel, connected wiring system, detectors and devices of any type as per existing on site,Panel make - APOLLO, in and including cables continuity, checking and clearing of fault in the system if any, activation of MCP settings and making serviceble entire system round the clock during currency of contract, location - RADL, LRDE complex complete all as directed in Engineer -in-Charge.
2
-
-
Labour for servicing, checking, caliberation, testing of existing fire alarm panel, connected wiring system, detectors and devices of any type as per existing on site,Panel make - RAVEL, in and including cables continuity, checking and clearing of fault in the system if any, activation of MCP settings and making serviceble entire system round the clock during currency of contract, location - EMP, LRDE complex complete all as directed in Engineer -in-Charge.
2
-
-
Labour for servicing, checking, caliberation, testing of existing fire alarm panel, connected wiring system, detectors and devices of any type as per existing on site,Panel make - RAVEL, in and including cables continuity, checking and clearing of fault in the system if any, activation of MCP settings and making serviceble entire system round the clock during currency of contract, location - A3MTDC, LRDE complex complete all as directed in Engineer -in-Charge. NOTES FOR ITEM NOS 76 TO 79 :- (i) All Spares inclusive in the quoted rate excluding supply of items mentioned in item Nos 81 to 89 here-in-after (ii) The firm is responsible for making good false ceiling of any type distrubed during rectification / fixing of spares etc and the cost for the same is inclusive in the quoted rate for proper functioning of fire alrm system complete during entire currency of the contract period all as directed by Engineer-in-charge. (iii) The job shall be paid twice in the contract period with an interval of Six months periodcity.
2
-
-
Checking of water sprinkle fire fighting system infrastructure complete, rectifications of water leakages in the pipe lines, servicing all controls,testing of pressure of water in the lines and near all sprinkles properly and replacement of sprinklers / bulbs, setting of temperature of sprinklers as per existing on the site as existing on earlier, tightening of all nuts, bolts and washers, testing system operation in all respects complete all directed by Engineer-in-charge NOTE : (i) The cost of all Spares are inclusive in the quoted rate as per site requirements (ii) The firm is responsible for making good false ceiling of any type distrubed during rectification / fixing of spares etc and the cost for the same is inclusive in the quoted rate complete all as directed by Engineer-in-charge. (iii) The job shall be paid twice in the contract period with an interval of Six months periodcity. (iii) The contractor is responsible for functionig of sprinkle system efficiently during entire currency period of the contract. Location - MLVP of LRDE area.
2
-
-
Supply and Installation of Single Loop Card which can support around 159 detectors and 159 devices suitable for site requirements including taking down defective item complete all as directed by Engineer-in-charge.
1
-
-
Supply and Installation of microprocessor controlled based 4 Zone Fire alarm Panel suitable for site requirements including taking down defective item complete all as directed by Engineer-in-charge.. Make - Ravel / Honeywell / Apollo or equ as approved by GE.
1
-
-
Supply and Installation of SMF Lead acid batteries for Fire alarm Panel suitable for site requirements including taking down defective item complete all as directed by Engineer-in-charge.
6
-
-
Supply installation testing of Photoelectric smoke Detector or smoke detectors of any type with Junction boxes as per site requirements make/ model including taking down defective item complete all as directed by Engineer-in-charge.
75
-
-
Supply and Installation of Manual call point with Junction boxes as per site requirements including taking down defective item complete all as directed by Engineer-in-charge.
2
-
-
Supply, Laying PVC copper cable FR 2 x 1.5 Sq mm armoured cable on surface of wall / ceiling in PVC conduit including taking down defective item complete all as directed by Engineer-in-charge. Note : PVC conduit as applicable shall be measured and paid separately under relevent item.
200
-
-
Supply, Laying PVC copper cable FR 2 x 1.5 Sq mm cable on surface of wall / ceiling or drawn through existing PVC conduit or as per site conditions including taking down defective item complete all as directed by Engineer-in-charge.
200
-
-
Supply and laying in replacement of PVC conduit 19 mm dia / Casing Capping with Accessories as per site requirements complete all as directed by Engineer-in-charge.
200
-
-
Supply fixing testing Conventional Hooter, Wall mountable, 24 V DC Operation, Piezo Electric Type, Operating Voltage 24V DC, Operating Current 40ma as per existing make and model of the site or equivelent specification model of any ISI marked complete for site requirements including taking down defective item complete all as directed by Engineer-in-charge.
2
-
-
Comprehensive Maintenance of MS Motorised Sliding gate by daily cleaning checking and carry out necessary maint as per site requirements for motor, gear box, top guider of gate guide roller assembly, drive system, compressing motor open box, rack pinion, manual over side mechanism base plate, control system /panel with actuator ,safety system control panel complete including replacement of worn out parts and winding all as directed by Engineer-in-charge. Location - Main Gate -02 Nos, A3MTDC - 02 Nos, RADL -02 Nos and MT -01 No.
14
-
-
Comprehensive Maintenance of MS Motorised rolling shutter by daily cleaning, checking and carry out necessary maintenance as per site requirements for motor, gear box, top guider of gate guide roller assembly, drive system, compressing motor open box, rack pinion, manual over side mechanism base plate, control system /panel with actuator ,safety system control panel n and including replacement of worn arts and winding works complete all as directed by Engineer-in-charge. Location of shutters - Total shutters = 04 Nos i.e APFNM -02 No, QRAD - 02 No. Note for item No. 89 & 90 : (i) The motorised sliding gates and rolling shutter shall be handedover to contractor as is where is basis, the firm shall have a visit sites before their quote and the quoted cost for maint is inclusive for day to day maint, preventive maintenance, pro-active maintenance, attending of complaints of defects as and when intimated by concerned JE E/M and also inclusive for all type of spares and repair works, rewinding works as applicable for proper functioning of gates and shutters during entire currency period of contract and nothing extra shall be paid by the Deptt in this regards.(ii) The job shall be paid twice in the contract period with an interval of Six months periodcity.
8
-
-
Supply only PVC insulated, PVC unsheathed, multi-stranded heavy duty copper conductor cable of 1.5 sq.mm size, FRLS grade, complete all as directed by Engineer-in-charge.
180
-
-
Supply only PVC insulated, PVC unsheathed, multi-stranded heavy duty copper conductor cable of 2.5 sq.mm size, FRLS grade, complete all as directed by Engineer-in-charge.
180
-
-
Supply only PVC insulated, PVC unsheathed multi-stranded heavy duty copper conductor cable of 4.0 sq.mm size, FRLS grade, complete all as directed by Engineer-in-charge.
180
-
-
Supply only PVC insulated, PVC unsheathed multi-stranded heavy duty copper conductor cable of 6.0 sq.mm size, FRLS grade, complete all as directed by Engineer-in-charge.
180
-
-
Supply only PVC insulated, flexible copper cable, 23/0.0052, 3 core, 230 volts, complete all as directed by Engineer-in-charge.
180
-
-
Supply, draw, connect & testing weather proof PVC insulated, multi stranded copper conductor cable, 1 sq mm, 3 core, 1100 volts, complete all as directed by Engineer-in-charge.
180
-
-
Supply only switch piano, flush type, 5/6 Amps single pole, 230 V, one-way, complete all as directed by Engineer-in-charge.
100
-
-
Supply only switch socket combination, 5 pin, 5 Amps, 240 V, flush type, multipurpose, controlled by one switch, with gang box, complete all as directed by Engineer-in-charge.
50
-
-
Supply only Gang box along with switch socket combination, 6 pin, 5 A & 15 Amps, 240 V, flush type, multipurpose, controlled by one switch, complete all as directed by Engineer-in-charge.
50
-
-
Supply only Gang box along with switch socket combination, 5 pin, 5 Amps, 240 V, flush type, multipurpose, controlled by one switch, with gang box, complete all as directed by Engineer-in-charge.
50
-
-
Supply only switch socket combination, 6 pin, 5 A & 15 Amps, 240 V, flush type, multipurpose, controlled by one switch, complete all as directed by Engineer-in-charge.
50
-
-
Supply only fan regulator electronic type, 230 V, dimmer type, stepped type, 120 W complete all as directed by Engineer-in-charge.
25
-
-
Supply only fan capacitor of 2.5 mfd for ceiling fan, single phase, 230 V, complete all as directed by Engineer-in-charge.
100
-
-
Supply only MCB, SP, 230 V, 6 to 32 Amps 'C' series, 50 Hz, 240 V, 10 kA, breaking capacity, complete all as specified..
10
-
-
Supply only MCB SPN, 230 V, 6 to 32 Amps 'C' series, 50 Hz, 240 V, 10 kA, breaking capacity, complete all as directed by Engineer-in-charge.
5
-
-
Supply only LED tube light fitting with tube rod, 18/20 Watt, 4 feet long, with high lumen output, IP 20 protection, environmental friendly, energy efficient LED, electrical efficiency 85%, system efficacy 100 lm/W, operating voltage between 140 - 270 V, AC, 50 Hz, TDH, 10%, power factor ≥ 0.95 complete in all respects, prewired and connecting with 3 Core 1 sq mm copper cable, complete all as directed by Engineer-in-charge Make - Cat No DIJB12LT8-20 + LT8-20-865-2 of make crompton or techno commercially equivalent model of other spceified and approved makes.
30
-
-
Supply and fixing LED ceiling surface mounted full lit luminaire with glare free uniform illumination 36 W 2 ft x 2 ft (100 Lumen/Watt) illumination suitable for ceiling, operating voltage between 140 - 270 V, AC, 50 Hz, PF = 0.95 complete in all respects, prewired and connecting with 3 Core 1 sq mm copper cable complete in all respects all a directed by Engineer-in-charge. MAKE:- Crompton Cat No.LCTLSNE-36-FO-CDL ortechno commercially equivalent model of other spceified and approved makes.
10
-
-
Supply only LED ceiling mounted recessed full lit luminaire with glare free uniform illumination with lamps, 36 Watt, (2 feet x 2 feet), with high lumen output, environmental friendly, energy efficient LED, electrical efficiency 85% complete in all respects, prewired connecting with 3 Core 1 sq mm copper cable, complete all as directed by Engineer-in-charge Make - Cat No LCTLRNE-36-FO-CDL of make Crompton or techno commercially equivalent model of other spceified and approved makes.
Note : For Ser No 91 to 108 :- Items shall be supplied as ordered on requirment basis. Item shall be fixed by the outsourcing contract staff and hence labour element not considered.
10
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements